Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250723173004776P6QSjcW7NrlpGYLTFM-yP@zte.com.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For WPA3-SAE Connection in EXTSAE mode, the userspace daemon is allowed to
generate the SAE Auth frames. The driver uses the "mgmt_frame" FW IOVAR to
transmit this MGMT frame.
Before sending the IOVAR, the Driver is incorrectly treating the channel
number read from the FW as a frequency value and again attempts to convert
this into a channel number using ieee80211_frequency_to_channel().
This added an invalid channel number as part of the IOVAR request to the FW
And some FW which strictly expects a valid channel would return BAD_CHAN
error, while failing to transmit the driver requested SAE Auth MGMT frame.
Fix this in the CYW vendor specific MGMT TX cfg80211 ops handler, by not
treating the channel number read from the FW as frequency value and skip
the attempt to convert it again into a channel number.
Also fix this in the generic MGMT TX cfg80211 ops handler.
Fixes: c2ff8cad64 ("brcm80211: make mgmt_tx in brcmfmac accept a NULL channel")
Fixes: 66f909308a ("wifi: brcmfmac: cyw: support external SAE authentication in station mode")
Signed-off-by: Ting-Ying Li <tingying.li@cypress.com>
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250723105918.5229-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a subset of unused functions in bcrmsmac phy_cmn.c,
They're unused since the original 2010
commit a9533e7ea3 ("Staging: Add initial release of brcm80211 - Broadcom
802.11n wireless LAN driver.")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250626140812.56700-4-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a subset of unused functions in bcrmsmac phy_cmn.c,
They're unused since the original 2010
commit a9533e7ea3 ("Staging: Add initial release of brcm80211 - Broadcom
802.11n wireless LAN driver.")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250626140812.56700-3-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a subset of unused functions in bcrmsmac phy_cmn.c,
They're unused since the original 2010
commit a9533e7ea3 ("Staging: Add initial release of brcm80211 - Broadcom
802.11n wireless LAN driver.")
Remove them.
Then remove two more functions in phy_n.c that were only used
by the ones just removed.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250626140812.56700-2-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In brcmf_cyw_mgmt_tx() the "len" counter of the struct
brcmf_mf_params_le::data flexible array is stored as little-endian via
cpu_to_le16() so the __counted_by_le() variant must be used:
struct brcmf_mf_params_le *mf_params;
...
mf_params_len = offsetof(struct brcmf_mf_params_le, data) +
(len - DOT11_MGMT_HDR_LEN);
mf_params = kzalloc(mf_params_len, GFP_KERNEL);
...
mf_params->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN);
Fixes: 66f909308a ("wifi: brcmfmac: cyw: support external SAE authentication in station mode")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250721181810.work.575-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CYW54591 is a variant of BCM4355 silicon with the same chipid. In the
chipid-fwname mapping table, apply chiprev 13 to identify CYW54591.
Skip reading OTP process for CYW chip since it contains vendor specific
information which is not common for cypress.
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250624093453.7264-1-ian.lin@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After commit bd99a3013b ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().
Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.
To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.
Fixes: bd99a3013b ("brcmfmac: move configuration of probe request IEs")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the SDIO ID and firmware matching for the 43751 device.
Based on the previous work from Marc Gonzalez <mgonzalez@freebox.fr>.
Tested on an i.MX6DL board connected to an AP6398SV chip with the
brcmfmac43752-sdio.bin firmware taken from:
https://source.puri.sm/Librem5/firmware-brcm43752-nonfree
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250712215307.1310802-1-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use min() to reduce the code and improve its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250715121721.266713-5-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a spelling mistake of 'notifer' in the comment which
should be 'notifier'.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/F92035B0A9123150+20250715134407.540483-5-wangyuli@uniontech.com
[remove prior link]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A new warning in clang [1] complains that diq_start in
wlc_lcnphy_tx_iqlo_cal() is passed uninitialized as a const pointer to
wlc_lcnphy_common_read_table():
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2728:13: error: variable 'diq_start' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2728 | &diq_start, 1, 16, 69);
| ^~~~~~~~~
The table pointer passed to wlc_lcnphy_common_read_table() should not be
considered constant, as wlc_phy_read_table() is ultimately going to
update it. Remove the const qualifier from the tbl_ptr to clear up the
warning.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2108
Fixes: 5b435de0d7 ("net: wireless: add brcm80211 drivers")
Link: 00dacf8c22 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250715-brcmsmac-fix-uninit-const-pointer-v1-1-16e6a51a8ef4@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a check to determine whether arp/nd offload enabling
request is allowed. If there is any interface acts as ap
mode and is operating, reject the request of arp offload
enabling from cfg80211.
Signed-off-by: Ting-Ying Li <tingying.li@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250606093444.15753-1-ian.lin@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't populate the read-only array cfg_offset on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250619082554.1834654-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Add pmkid parameter in "brcmf_auth_req_status_le" structure to
align the buffer size defined in firmware "wl_auth_req_status"
structure.
Signed-off-by: Ting-Ying Li <tingying.li@infineon.com>
[arend: adapted path to apply to per-vendor variant]
[arend: added kerneldoc for new struct field]
Tested-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250425085519.492267-5-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Firmware has SME functionality but would like the userspace to handle
SAE authentication. This patch adds support for such an external SAE
authentication mechanism in station mode.
Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com>
[arend: rework patch for per-vendor framework]
Tested-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250425085519.492267-4-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding two vendor operations that can be used to provide per-vendor
cfg80211 callbacks and per-vendor handlers for firmware events. These
two are often related to handling interactions from user-space through
nl80211. Exporting brcmf_fweh_register() for registering the per-vendor
event handler callbacks. Some other exports for get event name string
and allowing use of brcmf_dbg() in per-vendor module.
Tested-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250425085519.492267-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=s9mS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In brcmf_usb_dl_cmd(), the error logging is not enough to describe
the error state. And some caller of the brcmf_usb_dl_cmd() does not
handle its error. An error log in brcmf_usb_dl_cmd() is needed to
prevent silent failure.
Add error handling in brcmf_usb_dl_cmd() to log the command id and
error code in the brcmf_usb_dl_cmd() fails. In this way, every
invocation of the function logs a message upon failure.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422065938.2345-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2 ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
-----BEGIN PGP SIGNATURE-----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=FdK4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a handful of fixes, notably
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
* tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"
wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error
wifi: iwlwifi: pcie: set state to no-FW before reset handshake
wifi: wl1251: fix memory leak in wl1251_tx_work
wifi: brcmfmac: fix memory leak in brcmf_get_module_param
wifi: iwlwifi: mld: silence uninitialized variable warning
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()
wifi: at76c50x: fix use after free access in at76_disconnect
wifi: add wireless list to MAINTAINERS
iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled
wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning
wifi: iwlwifi: mld: reduce scope for uninitialized variable
====================
Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The memory allocated for settings is not freed when brcmf_of_probe
fails. Fix that by freeing settings before returning in error path.
Fixes: 0ff0843310 ("wifi: brcmfmac: Add optional lpo clock enable support")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250330103425.44197-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----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=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
-----BEGIN PGP SIGNATURE-----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=Dere
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
bugfixes for 6.14:
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
* tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: disable multi-link reconfiguration
wifi: cfg80211: regulatory: improve invalid hints checking
wifi: brcmfmac: keep power during suspend if board requires it
wifi: mac80211: Fix sparse warning for monitor_sdata
wifi: mac80211: fix vendor-specific inheritance
wifi: mac80211: fix MLE non-inheritance parsing
wifi: iwlwifi: Fix A-MSDU TSO preparation
wifi: iwlwifi: Free pages allocated when failing to build A-MSDU
wifi: iwlwifi: limit printed string from FW file
wifi: iwlwifi: mvm: use the right version of the rate API
wifi: iwlwifi: mvm: don't try to talk to a dead firmware
wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend
wifi: iwlwifi: mvm: clean up ROC on failure
wifi: iwlwifi: fw: avoid using an uninitialized variable
wifi: iwlwifi: fw: allocate chained SG tables for dump
wifi: mac80211: remove debugfs dir for virtual monitor
wifi: mac80211: Cleanup sta TXQs on flush
wifi: nl80211: reject cooked mode if it is set along with other flags
====================
Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 92cadedd9d ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.
This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:
brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.
Signed-off-by: Matthias Proske <email@matthias-proske.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmemULoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvFigf/fvP7ri+6cyE50Qvau9lQjmrvojQx6Wg4
Jp5kOfXNzyLrEp+SA49UdIEGKak/Speo99ntWvrGrXWSHvW76DzNq5c+XJqffhm6
s+uOcdHlqBRXzD9PuZ0NT75nlb0gBkqGyV6VUW90dwI/lyGNEAwUrbdUO7B8Kmty
KW2hPQP4Zp5Sjm1ZGMKRmwt0qxZBrGKqCq7RqKYldO7PKOhKGfwhpViZxtceo5/2
NdyCVh6LeGP8Kjwo7cMfprNAcLQ2F5+Q9xtjid69TTrW77E9PVK73IGBb+pPwgAd
AzdkNPMX3TwAm/NyAuMhMWXF9VzVzFIfboNgLiAlT2JSYNU7vMtqng==
=54RU
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Before 6.13, random seed to the firmware was given based on the logic
whether the device had valid OTP or not, and such devices were found
mainly on the T2 and Apple Silicon Macs. In 6.13, the logic was changed,
and the device table was used for this purpose, so as to cover the special
case of BCM43752 chip.
During the transition, the device table for BCM4364 and BCM4355 Wi-Fi chips
which had valid OTP was not modified, thus breaking Wi-Fi on these devices.
This patch adds does the necessary changes, similar to the ones done for
other chips.
Fixes: ea11a89c3a ("wifi: brcmfmac: add flag for random seed during firmware download")
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/47E43F07-E11D-478C-86D4-23627154AC7C@live.com
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Correct the spelling dictionary so that future instances will be caught by
checkpatch, and fix the instances found.
Link: https://lkml.kernel.org/r/20241211154903.47027-1-cvam0000@gmail.com
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Shivam Chaudhary <cvam0000@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following
kernel-doc issues:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes'
Add the missing 'Return:' tags to the kernel-doc of these functions.
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace misleading log "insufficient headroom (0)" with more clear
"unmodifiable headroom".
Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241213081402.625003-1-alexthreed@gmail.com
Including the fwil.h header file can lead to a build error:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h: \
In function ‘brcmf_fil_cmd_int_set’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h:90:9: error: implicit \
declaration of function ‘brcmf_dbg’ [-Werror=implicit-function-declaration]
90 | brcmf_dbg(FIL, "ifidx=%d, cmd=%d, value=%d\n", ifp->ifidx, cmd, data);
| ^~~~~~~~~
The error is often avoided because the debug.h header file is included
before the fwil.h header file.
This makes sure the header include order is irrelevant by explicitly adding the
debug.h header.
Fixes: 31343230ab ("wifi: brcmfmac: export firmware interface functions")
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241211133618.2014083-1-marcel.hamer@windriver.com
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
This removes the following error log when stopping AP:
ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -52
It happened if:
1) previously wlan interface was in station mode (wpa_supplicant) and
connected to a hotspot
2) then started AP mode (hostapd)
3) and then stopped AP mode.
The error happened when it tried to clear BRCMF_VNDR_IE_PRBREQ_FLAG.
This flag is not set in `brcmf_config_ap_mgmt_ie`, but
BRCMF_VNDR_IE_ASSOCRSP_FLAG is set instead.
Signed-off-by: Renjaya Raga Zenta <ragazenta@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241121-brcmfmac-v1-1-02fc3fb427c2@gmail.com
The scatter-gather handling uses a pre-allocated list (with nents entries).
If the driver runs out of sg entries it will result in an oops. Let's detect
this instead and make the SDIO block transfer fail.
Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241108125609.107016-1-nvbolhuis@gmail.com
Currently, TX power is reported on interface/wdev level as
part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links
can be part of an interface/wdev and hence its necessary to
report the TX power of each link.
Add support to send tx power for all valid links of an MLD as
part of NL80211_CMD_GET_INTERFACE request.
As far as userspace is concerned, there is no behavioral change
for Non-ML Interfaces. For ML interfaces, userspace should fetch
TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to
how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
