fbnic_fw_clear_cmpl() does the inverse of fbnic_mbx_set_cmpl().
It removes the completion from the mailbox table.
It also calls fbnic_mbx_set_cmpl_slot() internally.
It should have fbnic_mbx prefix, not fbnic_fw.
I'm not very clear on what the distinction is between the two
prefixes but the matching "set" and "clear" functions should
use the same prefix.
While at it move the "clear" function closer to the "set".
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250624142834.3275164-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace the pattern of calling and validating kzalloc then
fbnic_fw_init_cmpl with a single function, fbnic_fw_alloc_cmpl.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250516164804.741348-1-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to update the CMRT and control firmware as well as the UEFI
driver on fbnic using devlink dev flash.
Make sure the shutdown / quiescence paths like suspend take the devlink
lock to prevent them from interrupting the FW flashing process.
Signed-off-by: Lee Trager <lee@trager.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512190109.2475614-6-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Program the Rx TCAM to control L2 forwarding. Since we are in full
control of the NIC we need to make sure we include BMC forwarding
in the rules. When host is not present BMC will program the TCAM
to get onto the network but once we take ownership it's up to
Linux driver to make sure BMC L2 addresses are handled correctly.
Co-developed-by: Sanman Pradhan <sanmanpradhan@meta.com>
Signed-off-by: Sanman Pradhan <sanmanpradhan@meta.com>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079943202.1778861.4410412697614789017.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a part of enabling the device the first step is to configure the AXI and
Ethernet interfaces to allow for basic traffic. This consists of
configuring several registers related to the PCIe and Ethernet FIFOs as
well as configuring the handlers for moving traffic between entities.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079936376.1778861.15942501417449077552.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the core of the fbnic device will be the devlink interface. This
interface will eventually provide basic functionality in the event that
there are any issues with the network interface.
Add support for allocating the MSI-X vectors and setting up the BAR
mapping. With this we can start enabling various subsystems and start
brining up additional interfaces such the AXI fabric and the firmware
mailbox.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/172079936012.1778861.4670986685222676467.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
