Mailbox UP messages and CPT messages names are not being
displayed with their names in trace log files. Add those
messages too in otx2_mbox_id2name.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1747136408-30685-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e5 ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.
Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware supports multiple MAC types, including RPM, SDP, and LBK.
However, features such as link settings and pause frames are only available
on RPM MAC, and not supported on SDP or LBK.
This patch updates the ethtool operations logic accordingly to reflect
this behavior.
Fixes: 2f7f33a095 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the mvpp2 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Note that on the !port->hwtstamp condition, the old code used to fall
through in mvpp2_ioctl(), and return either -ENOTSUPP if !port->phylink,
or -EOPNOTSUPP, in phylink_mii_ioctl(). Keep the test for port->hwtstamp
in the newly introduced net_device_ops, but consolidate the error code
to just -EOPNOTSUPP. The other one is documented as NFS-specific, it's
best to avoid it anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508144630.1979215-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa ("octeon_ep: add heartbeat monitor")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The currently used function pci_request_regions() is one of the
problematic "hybrid devres" PCI functions, which are sometimes managed
through devres, and sometimes not (depending on whether
pci_enable_device() or pcim_enable_device() has been called before).
The PCI subsystem wants to remove this behavior and, therefore, needs to
port all users to functions that don't have this problem.
Furthermore, the PCI function being managed implies that it's not
necessary to call pci_release_regions() manually.
Remove the calls to pci_release_regions().
Replace pci_request_regions() with pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250425085740.65304-4-phasta@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The currently used function pci_request_regions() is one of the
problematic "hybrid devres" PCI functions, which are sometimes managed
through devres, and sometimes not (depending on whether
pci_enable_device() or pcim_enable_device() has been called before).
The PCI subsystem wants to remove this behavior and, therefore, needs to
port all users to functions that don't have this problem.
Furthermore, the PCI function being managed implies that it's not
necessary to call pci_release_regions() manually.
Remove the calls to pci_release_regions().
Replace pci_request_regions() with pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250425085740.65304-3-phasta@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netdevice usage count increases during transmit queue timeouts
because netdev_hold is called in ndo_tx_timeout, scheduling a task
to reinitialize the card. Although netdev_put is called at the end
of the scheduled work, rtnl_unlock checks the reference count during
cleanup. This could cause issues if transmit timeout is called on
multiple queues.
Fixes: cb7dd71218 ("octeon_ep_vf: Add driver framework and device initialization")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Link: https://patch.msgid.link/20250424133944.28128-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current API, otx2_xdp_sq_append_pkt, verifies the number of available
descriptors before sending packets to the hardware.
However, for AF_XDP, this check is unnecessary because the batch value
is already determined based on the free descriptors.
This patch introduces a new API, "otx2_xsk_sq_append_pkt" to address this.
Remove the logic for releasing the TX buffers, as it is implicitly handled
by xsk_tx_peek_release_desc_batch
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250420032350.4047706-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of rvu_npc_enable_bcast_entry() was removed in 2021 by
commit 967db3529e ("octeontx2-af: add support for multicast/promisc
packet replication feature")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250420225810.171852-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Adding error pointer check after calling otx2_mbox_get_rsp().
This is similar to the commit bd3110bc10
("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 6c40ca957f ("octeontx2-pf: Adds TC offload support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250412183327.3550970-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
The cn10k_free_matchall_ipolicer() calls the cn10k_map_unmap_rq_policer()
for each queue in a for loop without checking for any errors.
Check the return value of the cn10k_map_unmap_rq_policer() function during
each loop, and report a warning if the function fails.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250408032602.2909-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.
This ensure at any given point of time PF traffic gets more priority.
PF root node
TL1
/ \
TL2 TL2 VF root node
/ \
TL3 TL3
/ \
TL4 TL4
/ \
SMQ SMQ
Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors
Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the current implementation octeontx2 manages XDP_ABORTED and XDP
invalid as XDP_PASS forwarding the skb to the networking stack.
Align the behaviour to other XDP drivers handling XDP_ABORTED and XDP
invalid as XDP_DROP.
Please note this patch has just compile tested.
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250401-octeontx2-xdp-abort-fix-v1-1-f0587c35a0b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250401065855.3113635-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the incorrect initial vector number in
rvu_nix_unregister_interrupts(), NIX_AF_INT_VEC_GEN is not
geeting free. Fix the vector number to include NIX_AF_INT_VEC_GEN
irq.
Fixes: 5ed66306ea ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327094054.2312-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e3 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250324080854.408188-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9RMg
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-03-24
1) Prevent setting high order sequence number bits input in
non-ESN mode. From Leon Romanovsky.
2) Support PMTU handling in tunnel mode for packet offload.
From Leon Romanovsky.
3) Make xfrm_state_lookup_byaddr lockless.
From Florian Westphal.
4) Remove unnecessary NULL check in xfrm_lookup_with_ifid().
From Dan Carpenter.
* tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid()
xfrm: state: make xfrm_state_lookup_byaddr lockless
xfrm: check for PMTU in tunnel mode for packet offload
xfrm: provide common xdo_dev_offload_ok callback implementation
xfrm: rely on XFRM offload
xfrm: simplify SA initialization routine
xfrm: delay initialization of offload path till its actually requested
xfrm: prevent high SEQ input in non-ESN mode
====================
Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set metadata size building the skb from xdp_buff in octeontx2 driver.
octeontx2 driver sets xdp headroom to OTX2_HEAD_ROOM
OTX2_HEAD_ROOM OTX2_ALIGN
OTX2_ALIGN 128
so the headroom is large enough to contain xdp_frame and xdp metadata.
Please note this patch is just compiled tested.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250318-mvneta-xdp-meta-v2-4-b6075778f61f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set metadata size building the skb from xdp_buff in mvpp2 driver
mvpp2 driver sets xdp headroom to:
MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM
where
MVPP2_MH_SIZE 2
MVPP2_SKB_HEADROOM min(max(XDP_PACKET_HEADROOM, NET_SKB_PAD), 224)
so the headroom is large enough to contain xdp_frame and xdp metadata.
Please note this patch is just compiled tested.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250318-mvneta-xdp-meta-v2-2-b6075778f61f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set metadata size building the skb from xdp_buff in mvneta driver
mvneta sets xdp headroom to:
MVNETA_MH_SIZE + MVNETA_SKB_HEADROOM
where
MVNETA_MH_SIZE 2
MVNETA_SKB_HEADROOM max(NET_SKB_PAD, XDP_PACKET_HEADROOM)
so the headroom is large enough to contain xdp_frame and xdp metadata.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250318-mvneta-xdp-meta-v2-1-b6075778f61f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Non IP flow, with vlan tag not working as expected while
running below command for vlan-priority. fixed that.
ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0
Fixes: 1274daede3 ("net: mvpp2: cls: Add steering based on vlan Id and priority.")
Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although the PCI device ID and Vendor ID for the RPM (MAC) block
have remained the same across Octeon CN10K and the next-generation
CN20K silicon, Hardware architecture has changed (NIX mapped RPMs
and RFOE Mapped RPMs).
Add PCI Subsystem IDs to the device table to ensure that this driver
can be probed from NIX mapped RPM devices only.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250224035603.1220913-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Almost all drivers except bond and nsim had same check if device
can perform XFRM offload on that specific packet. The check was that
packet doesn't have IPv4 options and IPv6 extensions.
In NIC drivers, the IPv4 HELEN comparison was slightly different, but
the intent was to check for the same conditions. So let's chose more
strict variant as a common base.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
A previous patch introduces a build-time warning when CONFIG_DCB
is disabled:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function 'otx2_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:3217:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c: In function 'otx2vf_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c:740:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
Add the same #ifdef check around it.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://patch.msgid.link/20250219162239.1376865-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements below changes,
1. To avoid concurrency with normal traffic uses
XDP queues.
2. Since there are chances that XDP and AF_XDP can
fall under same queue uses separate flags to handle
dma buffers.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RSS table needs to be reconfigured once a rx queue is enabled or
disabled for AF_XDP zerocopy support. After enabling UMEM on a rx queue,
that queue should not be part of RSS queue selection algorithm.
Similarly the queue should be considered again after UMEM is disabled.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds support to AF_XDP zero copy for CN10K.
This patch specifically adds receive side support. In this approach once
a xdp program with zero copy support on a specific rx queue is enabled,
then that receive quse is disabled/detached from the existing kernel
queue and re-assigned to the umem memory.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set xdp rx ring memory type as MEM_TYPE_PAGE_POOL for
af-xdp to work. This is needed since xdp_return_frame
internally will use page pools.
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xdp_return_frames() will help to free the xdp frames and their
associated pages back to page pool.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a935bc6ca7933053f9e349578da4a8fb477b7c2d.1738746872.git.namcao@linutronix.de
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/44e2ebca1a3c1b90213cdb79f7a19ebe0ae70510.1738746872.git.namcao@linutronix.de
As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
but as usual there's a slight concentration of fixes for issues
added in the last two weeks before the MW, and driver bugs
from 6.13 which tend to get discovered upon wider distribution.
Including fixes from IPSec, netfilter and Bluetooth.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects
netdev state with a mutex now
Previous releases - regressions:
- eth: mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- eth: bgmac: reduce max frame size to support just 1500 bytes;
the jumbo frame support would previously cause OOB writes,
but now fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted,
avoid false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm: make sure skb->sk is a full sock before accessing its fields
- xfrm: fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GjBE
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add EEE support for mvpp2, using phylink's EEE implementation, which
means we just need to implement the two methods for LPI control, and
with the initial configuration. Only SGMII mode is supported, so only
100M and 1G speeds.
Disabling LPI requires clearing a single bit. Enabling LPI needs a full
configuration of several values, as the timer values are dependent on
the MAC operating speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE0-0014Pz-R9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert mvneta to use phylink's EEE implementation by implementing the
two LPI control methods, and adding the initial configuration and
capabilities.
Although disabling LPI requires clearing a single bit, for safety we
clear the manual mode and force bits to ensure that auto mode will be
used.
Enabling LPI needs a full configuration of several values, as the timer
values are dependent on the MAC operating speed, as per the original
code.
As Armada 388 states that EEE is only supported in "SGMII" modes, mark
this in lpi_interfaces. Testing with RGMII on the Clearfog platform
indicates that the receive path fails to detect LPI over RGMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Existing primitive has several problems:
1) calling conventions are clumsy - it returns a dentry reference
that is either identical to its second argument or is an ERR_PTR(-E...);
in both cases no refcount changes happen. Inconvenient for users and
bug-prone; it would be better to have it return 0 on success and -E... on
failure.
2) it allows cross-directory moves; however, no such caller have
ever materialized and considering the way debugfs is used, it's unlikely
to happen in the future. What's more, any such caller would have fun
issues to deal with wrt interplay with recursive removal. It also makes
the calling conventions clumsier...
3) tautological rename fails; the callers have no race-free way
to deal with that.
4) new name must have been formed by the caller; quite a few
callers have it done by sprintf/kasprintf/etc., ending up with considerable
boilerplate.
Proposed replacement: int debugfs_change_name(dentry, fmt, ...). All callers
convert to that easily, and it's simpler internally.
IMO debugfs_rename() should go; if we ever get a real-world use case for
cross-directory moves in debugfs, we can always look into the right way
to handle that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-21-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use debugfs_{create_file,get}_aux_num() instead.
[and for fsck sake, don't call variables filp - especially the
ones that are not even struct file *]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-19-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every case in the switch-block ends with return statement, and the
default: branch handles the cases where rsrc_type is invalid and
returns "Unknown", this makes the return statement at the end of the
function unreachable and redundant.
The semi-colon is not required after the switch-block's curly braces.
Remove the semi-colon after the switch-block's curly braces and the
return statement at the end of the function.
This issue was reported by Coverity Scan.
Signed-off-by: Nihar Chaithanya <niharchaithanya@gmail.com>
Link: https://patch.msgid.link/20250104171905.13293-1-niharchaithanya@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current implementation of mv643xx_eth_shared_of_add_port() calls
of_parse_phandle(), but does not release the refcount on error. Call
of_node_put() in the error path and in mv643xx_eth_shared_of_remove().
This bug was found by an experimental verification tool that I am
developing.
Fixes: 76723bca28 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241221081448.3313163-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When rvu_rep_devlink_port_register() fails, free_netdev(ndev) for this
incomplete iteration before going to "exit:" label.
Fixes: 9ed0343f56 ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When DCB is disabled, the pfc_en struct member cannot be accessed:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_is_pfc_enabled':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:22:48: error: 'struct otx2_nic' has no member named 'pfc_en'
22 | return IS_ENABLED(CONFIG_DCB) && !!pfvf->pfc_en;
| ^~
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c: In function 'otx2_nix_config_bp':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c:1755:33: error: 'IEEE_8021QAZ_MAX_TCS' undeclared (first use in this function)
1755 | req->chan_cnt = IEEE_8021QAZ_MAX_TCS;
| ^~~~~~~~~~~~~~~~~~~~
Move the member out of the #ifdef block to avoid putting back another
check in the source file and add the missing include file unconditionally.
Fixes: a7ef63dbd5 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213083228.2645757-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to target variable is being reassigned in npc_install_flow()
function, PF multicast rules are not getting installed.
This patch addresses the issue by fixing the "IF" condition
checks when rules are installed by AF.
Fixes: 6c40ca957f ("octeontx2-pf: Adds TC offload support").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These APIs are needed to support applications that use netlink to get VF
information from a PF driver.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20241206064135.2331790-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hardware is initialized and netdev transmit flow is
hooked up for outbound ipsec crypto offload, so finally
enable ipsec offload.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow to use hardware offload for outbound ipsec crypto
mode if security association (SA) is set for a given skb.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare and submit crypto hardware (CPT) instruction for
outbound ipsec crypto offload. The CPT instruction have
authentication offset, IV offset and encapsulation offset
in input packet. Also provide SA context pointer which have
details about algo, keys, salt etc. Crypto hardware encrypt,
authenticate and provide the ESP packet to networking hardware.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to add and delete Security Association
(SA) xfrm ops. Hardware maintains SA context in memory allocated
by software. Each SA context is 128 byte aligned and size of
each context is multiple of 128-byte. Add support for transport
and tunnel ipsec mode, ESP protocol, aead aes-gcm-icv16, key size
128/192/256-bits with 32bit salt.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One crypto hardware logical function (cpt-lf) per netdev is
required for outbound ipsec crypto offload. Allocate, attach
and initialize one crypto hardware function when enabling
outbound ipsec crypto offload. Crypto hardware function will
be detached and freed on disabling outbound ipsec crypto
offload.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NIX can assert backpressure to CPT on the NIX<=>CPT link.
Keep the backpressure disabled for now. NIX block anyways
handles backpressure asserted by MAC due to PFC or flow
control pkts.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move skb fragment map/unmap function to common file
so as to reuse same for outbound IPsec crypto offload
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Crypto hardware need write permission for in-place encrypt
or decrypt operation on skb-data to support IPsec crypto
offload. That patch uses skb_unshare to make skb data writeable
for ipsec crypto offload and map skb fragment memory as
device read-write.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the PCS in-band capabilities to phylink for Marvell PP2
interfaces.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsE-006IUh-E7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the PCS in-band capabilities to phylink for Marvell NETA
interfaces.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs9-006IUb-Au@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current driver allows only packet size < 512B as SDP_LINK_CREDIT
register is set to default value.
This patch fixes this issue by configure the register with
maximum HW supported value to allow packet size > 512B.
Fixes: 2f7f33a095 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization, the AF driver resets all blocks. The RPM (MAC)
block and NIX block operate on a credit-based model. When the NIX block
resets during active traffic flow, it doesn't release credits to the RPM
block. This causes the RPM FIFO to overflow, leading to receive traffic
struck.
To address this issue, the patch introduces the following changes:
1. Stop receiving traffic at the MAC level during AF driver
initialization.
2. Perform an X2P reset (prevents RXFIFO of all LMACS from pushing data)
3. Reset the NIX block.
4. Clear the X2P reset and re-enable receiving traffic.
Fixes: 54d557815e ("octeontx2-af: Reset all RVU blocks")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The corrected words register(FCFECX_VL0_CCW_LO)/Uncorrected words
register (FCFECX_VL0_NCCW_LO) of FCFEC counter has different LMAC
offset which needs to be accessed differently.
Fixes: 84ad364211 ("octeontx2-af: Add FEC stats for RPM/RPM_USX block")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The earlier patch sets the 'Stats control register' for RPM
receive/transmit statistics instead of RSFEC statistics,
causing the driver to return stale FEC counters.
Fixes: 84ad364211 ("octeontx2-af: Add FEC stats for RPM/RPM_USX block")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Low network performance is observed even on RPMs with larger
FIFO lengths.
The cn10kb silicon has three RPM blocks with the following
FIFO sizes:
--------------------
| RPM0 | 256KB |
| RPM1 | 256KB |
| RPM2 | 128KB |
--------------------
The current design stores the FIFO length in a common structure for all
RPMs (mac_ops). As a result, the FIFO length of the last RPM is applied
to all RPMs, leading to reduced network performance.
This patch resolved the problem by storing the fifo length in per MAC
structure (cgx).
Fixes: b9d0fedc62 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to a bug in the previous patch, there is a mismatch
between the lmac type reported by the driver and the actual
hardware configuration.
Fixes: 3ad3f8f93c ("octeontx2-af: cn10k: MAC internal loopback support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the clock pep->clk was not enabled in pxa168_eth_probe,
it should not be disabled in any path.
Conversely, if it was enabled in pxa168_eth_probe, it must be disabled
in all error paths to ensure proper cleanup.
Use the devm_clk_get_enabled helper function to ensure proper call balance
for pep->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: a49f37eed2 ("net: add Fast Ethernet driver for PXA168.")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241121200658.2203871-1-mordan@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implements tc offload support for rvu representors.
Usage example:
- Add tc rule to drop packets with vlan id 3 using port
representor(Rpf1vf0).
# tc filter add dev Rpf1vf0 protocol 802.1Q parent ffff: flower
vlan_id 3 vlan_ethtype ipv4 skip_sw action drop
- Redirect packets with vlan id 5 and IPv4 packets to eth1,
after stripping vlan header.
# tc filter add dev Rpf1vf0 ingress protocol 802.1Q flower vlan_id 5
vlan_ethtype ipv4 skip_sw action vlan pop action mirred ingress
redirect dev eth1
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the offload stat ndo by fetching the HW stats
of rx/tx queues attached to the representor.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register devlink port for the rvu representors.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware supports different types of MACs eg RPM, SDP, LBK.
LBK is for internal Tx->Rx HW loopback path. RPM and SDP MACs support
ingress/egress pkt IO on interfaces with different set of capabilities
like interface modes. At the time of netdev driver registration PF will
seek MAC related information from Admin function driver
'drivers/net/ethernet/marvell/octeontx2/af' and sets up ingress/egress
queues etc such that pkt IO on the channels of these different MACs is
possible. This patch add representors for SDP MAC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds support to manage the mtu configuration for VF through representor.
On update of representor mtu a mbox notification is send
to VF to update its mtu.
This feature is implemented based on the "Network Function Representors"
kernel documentation.
"
Setting an MTU on the representor should cause that same MTU
to be reported to the representee.
"
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
