Use the new virtchnl2 OP codes to communicate with the Control Plane to
add flow steering filters. We add the basic functionality for add/delete
with TCP/UDP IPv4 only. Support for other OP codes and protocols will be
added later.
Standard 'ethtool -N|--config-ntuple' should be used, for example:
# ethtool -N ens801f0d1 flow-type tcp4 src-ip 10.0.0.1 action 6
to route all IPv4/TCP traffic from IP 10.0.0.1 to queue 6.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the initial idpf_idc.c file with the functions to kick off the IDC
initialization, create and initialize a core RDMA auxiliary device, and
destroy said device.
The RDMA core has a dependency on the vports being created by the
control plane before it can be initialized. Therefore, once all the
vports are up after a hard reset (either during driver load a function
level reset), the core RDMA device info will be created. It is populated
with the function type (as distinguished by the IDC initialization
function pointer), the core idc_ops function points (just stubs for
now), the reserved RDMA MSIX table, and various other info the core RDMA
auxiliary driver will need. It is then plugged on to the bus.
During a function level reset or driver unload, the device will be
unplugged from the bus and destroyed.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mailbox operations are not possible while the driver is in reset.
Operations that require MBX exchange with the control plane will result
in long delays if executed while a reset is in progress:
ethtool -L <inf> combined 8& echo 1 > /sys/class/net/<inf>/device/reset
idpf 0000:83:00.0: HW reset detected
idpf 0000:83:00.0: Device HW Reset initiated
idpf 0000:83:00.0: Transaction timed-out (op:504 cookie:be00 vc_op:504 salt:be timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:508 cookie:bf00 vc_op:508 salt:bf timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:512 cookie:c000 vc_op:512 salt:c0 timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:510 cookie:c100 vc_op:510 salt:c1 timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:509 cookie:c200 vc_op:509 salt:c2 timeout:60000ms)
idpf 0000:83:00.0: Transaction timed-out (op:509 cookie:c300 vc_op:509 salt:c3 timeout:60000ms)
idpf 0000:83:00.0: Transaction timed-out (op:505 cookie:c400 vc_op:505 salt:c4 timeout:60000ms)
idpf 0000:83:00.0: Failed to configure queues for vport 0, -62
Disable mailbox communication in case of a reset, unless it's done during
a driver load, where the virtchnl operations are needed to configure the
device.
Fixes: 8077c72756 ("idpf: add controlq init and reset checks")
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move virtchnl structures to the header file to expose them for the PTP
virtchnl file.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that all the messages are using the transaction API, we can rework
idpf_recv_mb_msg quite a lot to simplify it. Due to this, we remove
idpf_find_vport as no longer used and alter idpf_recv_event_msg
slightly.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This starts refactoring how virtchnl messages are handled by adding a
transaction manager (idpf_vc_xn_manager).
There are two primary motivations here which are to enable handling of
multiple messages at once and to make it more robust in general. As it
is right now, the driver may only have one pending message at a time and
there's no guarantee that the response we receive was actually intended
for the message we sent prior.
This works by utilizing a "cookie" field of the message descriptor. It
is arbitrary what data we put in the cookie and the response is required
to have the same cookie the original message was sent with. Then using a
"transaction" abstraction that uses the completion API to pair responses
to the message it belongs to.
The cookie works such that the first half is the index to the
transaction in our array, and the second half is a "salt" that gets
incremented every message. This enables quick lookups into the array and
also ensuring we have the correct message. The salt is necessary because
after, for example, a message times out and we deem the response was
lost for some reason, we could theoretically reuse the same index but
using a different salt ensures that when we do actually get a response
it's not the old message that timed out previously finally coming in.
Since the number of transactions allocated is U8_MAX and the salt is 8
bits, we can never have a conflict because we can't roll over the salt
without using more transactions than we have available.
This starts by only converting the VIRTCHNL2_OP_VERSION message to use
this new transaction API. Follow up patches will convert all virtchnl
messages to use the API.
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf.h is quite heavy. We can reduce the burden a fair bit by
introducing an idpf_virtchnl.h file. This mostly just moves function
declarations but there are many of them. This also makes an attempt to
group those declarations in a way that makes some sense instead of
mishmashed.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
