Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements the .ndo_eth_ioctl() to
read and write the PHY register.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MAC hardware is on the BMC side, and the driver is on the host side.
When the driver is abnormal, the BMC cannot directly detect the
exception cause.
Therefore, this patch implements the BMC diagnosis feature.
When users query driver diagnosis information on the BMC, the driver
detects the query request in the scheduled task and reports
driver statistics and link status to the BMC through the bar space.
The BMC collects logs to analyze exception causes.
Currently, the scheduled task is executed every 30 seconds
To quickly respond to user query requests,
this patch changes the scheduled task to once every second.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the rate changed frequently, the PHY link ok,
but the MAC link maybe fails.
As a result, the network port is unavailable.
According to the documents of the chip,
core_reset needs to do to fix the fault.
In hw_adjus_link(), the core_reset is added to try to
ensure that MAC link status is normal.
In addition, MAC link failure detection is added.
If the MAC link fails after core_reset, driver invokes
the phy_stop() and phy_start() to re-link.
Due to phydev->lock, re-link cannot be triggered
in adjust_link(). Therefore, this operation
is invoked in a scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
the hardware error was reported by interrupt,
and need be fixed by doing function reset,
but the whole reset flow takes a long time,
should not do it in irq handler,
so do it in scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch implements the rx checksum offload feature.
The tx checksum offload processing in .ndo_start_xmit()
has been accepted. This patch also adds the tx checksum
feature, including NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver supports many hw statistics. This patch supports
dump statistics through ethtool_ops and ndo.get_stats64().
The type of hw statistics register is u32,
To prevent the statistics register from overflowing,
the driver dump the statistics every 30 seconds.
in a scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During the initialization of ptp, hclge_ptp_get_cycle might return an error
and returned directly without unregister clock and free it. To avoid that,
call hclge_ptp_destroy_clock to unregist and free clock if
hclge_ptp_get_cycle failed.
Fixes: 8373cd38a8 ("net: hns3: change the method of obtaining default ptp cycle")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Building with W=1 shows a warning about hns_mdio_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/hisilicon/hns_mdio.c:631:36: error: unused variable 'hns_mdio_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/11f5140e157cc0cd02a715f531217b021743aa71.1738746872.git.namcao@linutronix.de
When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.
But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.
To fixes it, introduce a new mutex to protect the unload process.
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107f ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the
user process is called next time, save_buf is used to copy the cached
data to the user space. As a result, the queried data is stale.
To solve this problem, this patch implements .open() and .release() handler
for debugfs file_operations. moving allocation buffer and execution
of the cmd to the .open() handler and freeing in to the .release() handler.
Allocate separate buffer for each reader and associate the buffer
with the file pointer.
When different user read processes no longer share the buffer,
the stale data problem is fixed.
Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enums dsaf_roce_port_mode, dsaf_roce_port_num and dsaf_roce_qos_sl
are unused after the removal of the reset code.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20241218163341.40297-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With hns_dsaf_roce_reset() removed in a previous patch, the two
helper member pointers, 'hns_dsaf_roce_srst', and 'hns_dsaf_srst_chns'
are now unread.
Remove them, and the helper functions that they were initialised
to, that is hns_dsaf_srst_chns(), hns_dsaf_srst_chns_acpi(),
hns_dsaf_roce_srst() and hns_dsaf_roce_srst_acpi().
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20241218163341.40297-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hns_rcb_start() has been unused since 2016's
commit 454784d85d ("net: hns: delete redundancy ring enable operations")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20241218163341.40297-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hns_dsaf_roce_reset() has been unused since 2021's
commit 38d2208824 ("RDMA/hns: Remove support for HIP06")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20241218163341.40297-2-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes, if the port doesn't work, we can try to fix it by resetting it.
This patch supports reset triggered by ethtool or FLR of PCIe, For example:
ethtool --reset eth0 dedicated
echo 1 > /sys/bus/pci/devices/0000\:83\:00.1/reset
We hope that the reset can be performed only when the port is down,
and the port cannot be up during the reset.
Therefore, the entire reset process is protected by the rtnl lock.
After the reset is complete, the hardware registers are restored
to their default values. Therefore, some rebuild operations are
required to rewrite the user configuration to the registers.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MAC can automatically send or respond to pause frames.
This patch supports the function of enabling pause frames
by using ethtool.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241216040532.1566229-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dump register is an effective way to analyze problems.
To ensure code flexibility, each register contains the type,
offset, and value information. The ethtool does the pretty print
based on these information.
The driver can dynamically add or delete registers that need to be dumped
in the future because information such as type and offset is contained.
ethtool always can do pretty print.
With the ethtool of a specific version,
the following effects are achieved:
[root@localhost sjj]# ./ethtool -d enp131s0f1
[SPEC] VALID [0x0000]: 0x00000001
[SPEC] EVENT_REQ [0x0004]: 0x00000000
[SPEC] MAC_ID [0x0008]: 0x00000002
[SPEC] PHY_ADDR [0x000c]: 0x00000002
[SPEC] MAC_ADDR_L [0x0010]: 0x00000808
[SPEC] MAC_ADDR_H [0x0014]: 0x08080802
[SPEC] UC_MAX_NUM [0x0018]: 0x00000004
[SPEC] MAX_MTU [0x0028]: 0x00000fc2
[SPEC] MIN_MTU [0x002c]: 0x00000100
[SPEC] TX_FIFO_NUM [0x0030]: 0x00000040
[SPEC] RX_FIFO_NUM [0x0034]: 0x0000007f
[SPEC] VLAN_LAYERS [0x0038]: 0x00000002
[MDIO] COMMAND_REG [0x0000]: 0x0000185f
[MDIO] ADDR_REG [0x0004]: 0x00000000
[MDIO] WDATA_REG [0x0008]: 0x0000a000
[MDIO] RDATA_REG [0x000c]: 0x00000000
[MDIO] STA_REG [0x0010]: 0x00000000
[GMAC] DUPLEX_TYPE [0x0008]: 0x00000001
[GMAC] FD_FC_TYPE [0x000c]: 0x00008808
[GMAC] FC_TX_TIMER [0x001c]: 0x000000ff
[GMAC] FD_FC_ADDR_LOW [0x0020]: 0xc2000001
[GMAC] FD_FC_ADDR_HIGH [0x0024]: 0x00000180
[GMAC] MAX_FRM_SIZE [0x003c]: 0x000005f6
[GMAC] PORT_MODE [0x0040]: 0x00000002
[GMAC] PORT_EN [0x0044]: 0x00000006
...
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MAC supports filtering unmatched unicast packets according to
the MAC address table. This patch adds the support for
unicast frame filtering.
To support automatic restoration of MAC entries
after reset, the driver saves a copy of MAC entries in the driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20241216040532.1566229-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch initializes debugfs and creates root directory
for each device. The tx_ring and rx_ring debugfs files
are implemented together.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216040532.1566229-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Tested-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20241104204823.297277-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20241101220023.290926-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:
[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670] klist_put+0x28/0x12c
[15278.138682][T50670] klist_del+0x14/0x20
[15278.142592][T50670] device_del+0xbc/0x3c0
[15278.146676][T50670] pci_remove_bus_device+0x84/0x120
[15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670] sriov_disable+0x50/0x11c
[15278.166829][T50670] pci_disable_sriov+0x24/0x30
[15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670] invoke_syscall+0x50/0x11c
[15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670] do_el0_svc+0x34/0xcc
[15278.207834][T50670] el0_svc+0x20/0x30
For details, see the following figure.
rmmod hclge disable VFs
----------------------------------------------------
hclge_exit() sriov_numvfs_store()
... device_lock()
pci_disable_sriov() hns3_pci_sriov_configure()
pci_disable_sriov()
sriov_disable()
sriov_disable() if !num_VFs :
if !num_VFs : return;
return; sriov_del_vfs()
sriov_del_vfs() ...
... klist_put()
klist_put() ...
... num_VFs = 0;
num_VFs = 0; device_unlock();
In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store().
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101091507.3644584-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit d80a309130, reversing
changes made to 637f414763:
2cf2461435 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices")
3e22b7de34 ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue")
d1c2e2961a ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()")
5f62009ff1 ("net: hns3: don't auto enable misc vector")
2758f18a83 ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.")
662ecfc466 ("net: hns3: fix missing features due to dev->features configuration too early")
3e0f7cc887 ("net: hns3: fixed reset failure issues caused by the incorrect reset type")
f2c14899ca ("net: hns3: add sync command to sync io-pgtable")
e6ab19443b ("net: hns3: default enable tx bounce buffer when smmu enabled")
The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds.
Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107f ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq..
Fixes: 7be1b9f3e9 ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the user
process is called next time, save_buf is used to copy the cached data
to the user space. As a result, the queried data is inconsistent. To solve
this problem, determine whether the function is invoked for the first time
based on the value of *ppos. If *ppos is 0, obtain the actual data.
Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To avoid errors in pgtable prefectch, add a sync command to sync
io-pagtable.
This is a supplement for the previous patch.
We want all the tx packet can be handled with tx bounce buffer path.
But it depends on the remain space of the spare buffer, checked by the
hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true.
But once it return false by no available space, the packet will be handled
with the former path, which will map/unmap the skb buffer.
Then the driver will face the smmu prefetch risk again.
So add a sync command in this case to avoid smmu prefectch,
just protects corner scenes.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a Makefile and update Kconfig to build hibmcge driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the .get_drvinfo .get_link .get_link_ksettings to get
the basic information and working status of the driver.
Implement the .set_link_ksettings to modify the rate, duplex,
and auto-negotiation status.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement rx_poll function to read the rx descriptor after
receiving the rx interrupt. Adjust the skb based on the
descriptor to complete the reception of the packet.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused, and .ndo_tx_timeout function to print some
information when the hardware is busy.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the .ndo_open() .ndo_stop() .ndo_set_mac_address()
and .ndo_change_mtu functions().
And .ndo_validate_addr calls the eth_validate_addr function directly
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver supports four interrupts: TX interrupt, RX interrupt,
mdio interrupt, and error interrupt.
Actually, the driver does not use the mdio interrupt.
Therefore, the driver does not request the mdio interrupt.
The error interrupt distinguishes different error information
by using different masks. To distinguish different errors,
the statistics count is added for each error.
To ensure the consistency of the code process, masks are added for the
TX interrupt and RX interrupt.
This patch implements interrupt request, and provides a
unified entry for the interrupt handler function. However,
the specific interrupt handler function of each interrupt
is not implemented currently.
Because of pcim_enable_device(), the interrupt vector
is already device managed and does not need to be free actively.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implements the C22 read and write PHY registers interfaces.
Some hardware interfaces related to the PHY are also implemented
in this patch.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for to read and write registers through the pic bar space.
Some driver parameters, such as mac_id, are determined by the
board form. Therefore, these parameters are initialized
from the register as device specifications.
the device specifications register are initialized and written by bmc.
driver will read these registers when loading.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add pci table supported in this module, and implement pci_driver function
to initialize this driver.
hibmcge is a passthrough network device. Its software runs
on the host side, and the MAC hardware runs on the BMC side
to reduce the host CPU area. The software interacts with the
MAC hardware through the PCIe.
┌─────────────────────────┐
│ HOST CPU network device │
│ ┌──────────────┐ │
│ │hibmcge driver│ │
│ └─────┬─┬──────┘ │
│ │ │ │
│HOST ┌───┴─┴───┐ │
│ │ PCIE RC │ │
└──────┴───┬─┬───┴────────┘
│ │
PCIE
│ │
┌──────┬───┴─┴───┬────────┐
│ │ PCIE EP │ │
│BMC └───┬─┬───┘ │
│ │ │ │
│ ┌────────┴─┴──────────┐ │
│ │ GE │ │
│ │ ┌─────┐ ┌─────┐ │ │
│ │ │ MAC │ │ MAC │ │ │
└─┴─┼─────┼────┼─────┼──┴─┘
│ PHY │ │ PHY │
└─────┘ └─────┘
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/ethernet to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use device_for_each_child_node_scoped() to simplify the code by removing
the need for explicit calls to fwnode_handle_put() in every error path.
This approach also accounts for any error path that could be added.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-2-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20240901112803.212753-11-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122336.3697176-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in hns_mac_get_info().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a helper function ARRAY_SIZE() to help calculating the
u32 array size, and we don't need to do it mannually. So, let's
use ARRAY_SIZE() to calculate the array size, and improve the code
readability.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20240818052518.45489-1-zhangzekun11@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.
Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consider the followed case that the user change speed and reset the net
interface. Before the hw change speed successfully, the driver get old
old speed from hw by timer task. After reset, the previous speed is config
to hw. As a result, the new speed is configed successfully but lost after
PF reset. The followed pictured shows more dirrectly.
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool -s 100G | |
+------------------>| set speed 100G |
| +--------------------->|
| | set successfully |
| |<---------------------+---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 200G | | changing event
| ethtool --reset |<---------------------+ | (100G)
+------------------>| cfg previous speed |<--+
| | after reset (200G) |
| +--------------------->|
| | +---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 100G | | changing event
| |<---------------------+ | (200G)
| | |<--+
| |query cfg (timer task)|
| +--------------------->|
| | return 200G |
| |<---------------------+
| | |
v v v
This patch save new speed if hw change speed successfully, which will be
used after reset successfully.
Fixes: 2d03eacc0b ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process will directly release the semaphore
which has already released in hclge_reset_prepare_general.
This will cause down operation fail.
So this patch fixes it by adding reset state judgement. The up operation is
only called after successful PF FLR reset.
Fixes: 8627bdedc4 ("net: hns3: refactor the precedure of PF FLR")
Fixes: f28368bb45 ("net: hns3: refactor the procedure of VF FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
Fixes: 45e92b7e4e ("net: hns3: add calling roce callback function when link status change")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each object file contains information about which module it gets linked
into, so linking the same file into multiple modules now causes a warning:
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_cmd.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_rss.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_tqp_stats.o is added to multiple modules: hclge hclgevf
Change the way that hns3 is built by moving the three common files into a
separate module with exported symbols instead.
Fixes: 5f20be4e90 ("net: hns3: refactor hns3 makefile to support hns3_common module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528161603.2443125-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Normal set of driver updates and small fixes:
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs, GID's
and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZkeo2gAKCRCFwuHvBreF
YbuNAQChzGmS4F0JAn5Wj0CDvkZghELqtvzEb92SzqcgdyQafAD/fC7f23LJ4OsO
1ZIaQEZu7j9DVg5PKFZ7WfdXjGTKqwA=
=QRXg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Aside from the usual things this has an arch update for
__iowrite64_copy() used by the RDMA drivers.
This API was intended to generate large 64 byte MemWr TLPs on PCI.
These days most processors had done this by just repeating writel() in
a loop. S390 and some new ARM64 designs require a special helper to
get this to generate.
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs,
GID's and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits)
RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
RDMA/IPoIB: Fix format truncation compilation errors
bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
RDMA/efa: Support QP with unsolicited write w/ imm. receive
IB/hfi1: Remove generic .ndo_get_stats64
IB/hfi1: Do not use custom stat allocator
RDMA/hfi1: Use RMW accessors for changing LNKCTL2
RDMA/mana_ib: implement uapi for creation of rnic cq
RDMA/mana_ib: boundary check before installing cq callbacks
RDMA/mana_ib: introduce a helper to remove cq callbacks
RDMA/mana_ib: create and destroy RNIC cqs
RDMA/mana_ib: create EQs for RNIC CQs
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/ipoib: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.
RDMA/core: Add an option to display driver-specific QPs in the rdmatool
RDMA/efa: Add shutdown notifier
RDMA/mana_ib: Fix missing ret value
IB/mlx5: Use __iowrite64_copy() for write combining stores
...
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ff ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a8 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3e ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71b ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dc ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Also propagate extack to hclge_get_cls_key_ip(), and convert it to
return error code.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240422152717.175659-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the ARM64 arch implementation does the DGH as part of
__iowrite64_copy() there is no reason to open code this in drivers.
Link: https://lore.kernel.org/r/5-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to query scc version by devlink info for device V3.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240410125354.2177067-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver received an interrupte for hardware error,
it will try to restore by resetting. But the hardware registers
will also be reset at this case, which make it hard to analysis
why the hardware error occurs.
This patch dumps these registers before resetting to help
analyze the hardware error occurs.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240410125354.2177067-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
some constants are defined in hclge_debugfs.h,
but only used in hclge_debugfs.c.
so move them from hclge_debugfs.h to hclge_debugfs.c.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240410125354.2177067-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, loopback test may be skipped when resetting, but the test
result will still show as 'PASS', because the driver doesn't set
ETH_TEST_FL_FAILED flag. Fix it by setting the flag and
initializating the value to UNEXECUTED.
Fixes: 4c8dab1c70 ("net: hns3: reconstruct function hns3_self_test")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash. This patch fixes this by taking devl_lock during initialization.
Fixes: b741269b27 ("net: hns3: add support for registering devlink for PF")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, hns hardware supports more than 512 queues and the index limit
in hclge_comm_tqps_update_stats is wrong. So this patch removes it.
Fixes: 287db5c40d ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The __string() and __assign_str() helper macros of the TRACE_EVENT() macro
are going through some optimizations where only the source string of
__string() will be used and the __assign_str() source will be ignored and
later removed.
To make sure that there's no issues, a new check is added between the
__string() src argument and the __assign_str() src argument that does a
strcmp() to make sure they are the same string.
The hclgevf trace events have:
__assign_str(devname, &hdev->nic.kinfo.netdev->name);
Which triggers the warning:
hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types]
34 | __assign_str(devname, &hdev->nic.kinfo.netdev->name);
[..]
arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’
75 | int strcmp(const char *cs, const char *ct);
| ~~~~~~~~~~~~^~
Because __assign_str() now has:
WARN_ON_ONCE(__builtin_constant_p(src) ? \
strcmp((src), __data_offsets.dst##_ptr_) : \
(src) != __data_offsets.dst##_ptr_); \
The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because
that name is:
char name[IFNAMSIZ]
Where passing an address '&' of a char array is not compatible with strcmp().
The '&' is not necessary, remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20240313093454.3909afe7@gandalf.local.home
Cc: netdev <netdev@vger.kernel.org>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Yufeng Mo <moyufeng@huawei.com>
Cc: Huazhong Tan <tanhuazhong@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Fixes: d8355240cf ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add checking for vf id of mailbox, in order to avoid array
out-of-bounds risk.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool, so it may cause the user
configuration dropped after reset.
To fix it, don't change the duplex mode when resetting.
Fixes: 2d03eacc0b ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
