hbg_irqs is a global array which contains irq statistics.
However, the irq statistics of different network ports
point to the same global array. As a result, the statistics are incorrect.
This patch allocates a statistics array for each network port
to prevent the statistics of different network ports
from affecting each other.
irq statistics are removed from hbg_irq_info. Therefore,
all data in hbg_irq_info remains unchanged. Therefore,
the input parameter of some functions is changed to const.
Fixes: 4d089035fa ("net: hibmcge: Add interrupt supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
the hardware error was reported by interrupt,
and need be fixed by doing function reset,
but the whole reset flow takes a long time,
should not do it in irq handler,
so do it in scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement rx_poll function to read the rx descriptor after
receiving the rx interrupt. Adjust the skb based on the
descriptor to complete the reception of the packet.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement .ndo_start_xmit function to fill the information of the packet
to be transmitted into the tx descriptor, and then the hardware will
transmit the packet using the information in the tx descriptor.
In addition, we also implemented the tx_handler function to enable the
tx descriptor to be reused, and .ndo_tx_timeout function to print some
information when the hardware is busy.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver supports four interrupts: TX interrupt, RX interrupt,
mdio interrupt, and error interrupt.
Actually, the driver does not use the mdio interrupt.
Therefore, the driver does not request the mdio interrupt.
The error interrupt distinguishes different error information
by using different masks. To distinguish different errors,
the statistics count is added for each error.
To ensure the consistency of the code process, masks are added for the
TX interrupt and RX interrupt.
This patch implements interrupt request, and provides a
unified entry for the interrupt handler function. However,
the specific interrupt handler function of each interrupt
is not implemented currently.
Because of pcim_enable_device(), the interrupt vector
is already device managed and does not need to be free actively.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
