Commit Graph

9 Commits

Author SHA1 Message Date
Taehee Yoo
0d14657f40 net: atlantic: Implement xdp control plane
aq_xdp() is a xdp setup callback function for Atlantic driver.
When XDP is attached or detached, the device will be restarted because
it uses different headroom, tailroom, and page order value.

If XDP enabled, it switches default page order value from 0 to 2.
Because the default maximum frame size is still 2K and it needs
additional area for headroom and tailroom.
The total size(headroom + frame size + tailroom) is 2624.
So, 1472Bytes will be always wasted for every frame.
But when order-2 is used, these pages can be used 6 times
with flip strategy.
It means only about 106Bytes per frame will be wasted.

Also, It supports xdp fragment feature.
MTU can be 16K if xdp prog supports xdp fragment.
If not, MTU can not exceed 2K - ETH_HLEN - ETH_FCS.

And a static key is added and It will be used to call the xdp_clean
handler in ->poll(). data plane implementation will be contained
the followed patch.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20 10:42:57 +01:00
Mark Starovoytov
508f2e3dce net: atlantic: split rx and tx per-queue stats
This patch splits rx and tx per-queue stats.
This change simplifies the follow-up introduction of PTP stats and
u64_stats_update_* usage.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20 18:07:38 -07:00
Mark Starovoytov
b772112c5a net: atlantic: make _get_sw_stats return count as return value
This patch changes aq_vec_get_sw_stats() to return count as a return
value (which was unused) instead of an out parameter.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20 18:07:38 -07:00
Mark Starovoytov
4272ba8b11 net: atlantic: per-TC queue statistics
This patch adds support for per-TC queue statistics.

By default (single TC), the output is the same as it used to be, e.g.:
     Queue[0] InPackets: 2
     Queue[0] OutPackets: 8
     Queue[0] Restarts: 0
     Queue[0] InJumboPackets: 0
     Queue[0] InLroPackets: 0
     Queue[0] InErrors: 0

If several TCs are enabled, then each queue statistics line is prefixed
with TC number, e.g.:
     TC0 Queue[0] InPackets: 6
     TC0 Queue[0] OutPackets: 11
Queue numbering is end-to-end, so:
     TC1 Queue[4] InPackets: 0
     TC1 Queue[4] OutPackets: 22

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 14:08:28 -07:00
Dmitry Bezrukov
8ce8427169 net: atlantic: changes for multi-TC support
This patch contains the following changes:
* access cfg via aq_nic_get_cfg() in aq_nic_start() and aq_nic_map_skb();
* call aq_nic_get_dev() just once in aq_nic_map_skb();
* move ring allocation/deallocation out of aq_vec_alloc()/aq_vec_free();
* add the missing aq_nic_deinit() in atl_resume_common();
* rename 'tcs' field to 'tcs_max' in aq_hw_caps_s to differentiate it from
  the 'tcs' field in aq_nic_cfg_s, which is used for the current number of
  TCs;
* update _TC_MAX defines to the actual number of supported TCs;
* move tx_tc_mode register defines slightly higher (just to keep the order
  of definitions);
* separate variables for TX/RX buff_size in hw_atl*_hw_qos_set();
* use AQ_HW_*_TC instead of hardcoded magic numbers;
* actually use the 'ret' value in aq_mdo_add_secy();

Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com>
Co-developed-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 14:08:28 -07:00
Thomas Gleixner
75a6faf617 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 101 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:15 +02:00
Igor Russkikh
db55061564 net: aquantia: Eliminate aq_nic structure abstraction
aq_nic_s was hidden in aq_nic_internal.h, that made it difficult to access
nic fields and structures from other modules.
This change moves aq_nic_s struct into aq_nic.h and thus makes it available
to other driver modules, mainly pci module and hw related module.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16 14:40:01 -05:00
Igor Russkikh
4cbc9f92f9 net: aquantia: Add const qualifiers for hardware ops tables
Hardware operations and capabilities tables are constants and
never changed. Declare these as constants.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16 14:40:00 -05:00
David VomLehn
970a2e9864 net: ethernet: aquantia: Vector operations
Add functions to manululate the vector of receive and transmit rings.

Signed-off-by: Alexander Loktionov <Alexander.Loktionov@aquantia.com>
Signed-off-by: Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com>
Signed-off-by: Pavel.Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com>
Signed-off-by: David M. VomLehn <vomlehn@texas.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24 15:03:40 -05:00