The name used in the macro does not exist.
drivers/mfd/stmpe-spi.c:132:26: error: use of undeclared identifier 'stmpe_id'
132 | MODULE_DEVICE_TABLE(spi, stmpe_id);
Fixes: e789995d5c ("mfd: Add support for STMPE SPI interface")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/79d5a847303e45a46098f2d827d3d8a249a32be3.1745591072.git.legion@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
If devm_of_platform_populate() fails, some clean-up needs to be done, as
already done in the remove function.
Add a new devm_add_action_or_reset() to fix the leak in the probe and
remove the need of a remove function.
Fixes: c695abab24 ("mfd: Add Samsung Exynos Low Power Audio Subsystem driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/69471e839efc0249a504492a8de3497fcdb6a009.1745247209.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
If an error occurs after a successful regmap_init_mmio(), regmap_exit()
should be called as already done in the .remove() function.
Switch to devm_regmap_init_mmio() to avoid the leak and simplify the
.remove() function.
Fixes: c414df12bd ("mfd: exynos-lpass: Add missing remove() function")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/38414eecb1096840946756ae86887aea2a489c1b.1745247209.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Using sizeof(*var) is generally preferred over using the size of its
open-coded type when allocating memory.
This helps avoiding bugs when the variable type changes but the memory
allocation isn't updated, and it simplifies renaming of the struct if
ever necessary.
No functional change.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-20-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Follow general style and use if (!arg) instead of comparing against
NULL.
While at it, drop a useless init in sec-irq.c.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-19-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Now that sec-i2c doesn't match device type by pointer casting anymore,
we can switch the device type from unsigned long to int easily.
This saves a few bytes in struct sec_pmic_dev due to member alignment.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-18-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Instead of a large open-coded switch statement, just add both regmap
config and device type to the OF match data. This allows us to have all
related information in one place, and avoids a long switch() statement.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-17-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
sec_irq_init() can fail, we shouldn't continue and ignore the error in
that case, but actually error out.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-16-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The commit bf231e5feb ("mfd: sec-core: Add support for the Samsung
s2dos05") adding s2dos05 support didn't add anything related to IRQ
support, so I assume this works without IRQs.
Rather than printing a warning message in sec_irq_init() due to the
missing IRQ number, or returning an error due to a missing irq chip
regmap, just return early explicitly.
This will become particularly important once errors from sec_irq_init()
aren't ignored anymore in an upcoming patch and helps the reader of
this code while reasoning about what the intention might be here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-15-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
When support for PMICs without compatibles was removed in
commit f736d2c0ca ("mfd: sec: Remove PMICs without compatibles"),
sec_regmap_config effectively became an orphan, because S5M8763X was
the only user left of it before removal, using the default: case of the
switch statement.
When s2dos05 and s2mpu05 support was added in commit bf231e5feb
("mfd: sec-core: Add support for the Samsung s2dos05") and commit
ed33479b7b ("mfd: sec: Add support for S2MPU05 PMIC"), they ended up
using that orphaned regmap_config in a non-obvious way due to the
default: case of the device type switch matching statement taking
effect again.
To make things more obvious, and to help the reader of this code while
reasoning about what the intention might be here, and to ensure future
additions to support new devices in this driver don't forget to add a
regmap config, add an explicit regmap config for these two devices, and
completely remove the generic regmap config as it becomes an orphan
again that shouldn't be used by any device.
Note that this commit doesn't fix the issue that s2dos05_regmap_config
ands2mpu05_regmap_config really are incomplete, but I have no
documentation on them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-14-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.
While at it, harmonise some error messages.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-13-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Sort struct of_device_id entries and the device type switch in _probe()
alphabetically, which makes it easier to find the right place where to
insert new entries in the future.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-12-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
There is no reason to have these two kernel modules separate. Having
them merged into one kernel module also slightly reduces memory
consumption and module load times a little.
mapped size (lsmod):
before: after:
sec_core 20480 sec_core 24576
sec_irq 16384
----------------
total 36864
Section sizes (size -A):
before: after:
sec_core 6780 sec_core 13239
sec_irq 8046
----------------
Total 14826
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-10-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for Samsung's S2MPG10 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, RTC, clock outputs, and additional GPIOs interfaces.
Contrary to existing Samsung S2M series PMICs supported, communication
is not via I2C, but via the Samsung ACPM firmware.
This commit adds the core driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-9-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
As a preparation for adding support for Samsung's S2MPG10, which is
connected via SPEEDY / ACPM rather than I2C, split out (move) all
I2C-specific driver code into its own kernel module, sec-i2c, and
make the existing sec-core module be just the transport-agnostic core
driver kernel module.
At the same time, update all defconfigs that reference the old kconfig
symbol name.
While at it, also update file header comments and module description(s)
to drop references to 'mfd', and update comments to be C-style, not
C++.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-8-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
sec_irq_init() is an internal API for the core driver, and doesn't
belong into the public header.
Due to an upcoming split of the driver into a core and i2c driver,
we'll also be adding more internal APIs, which again shouldn't be in
the public header.
Move it into a new internal include.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-7-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
This driver misses to include some of the respective headers of some of
the APIs used. It also includes headers that aren't needed (e.g. due to
previous driver rework where includes weren't updated).
It is good practice to directly include all headers used, which avoids
implicit dependencies and spurious build breakage if someone rearranged
headers, as this could cause the implicit includes to be dropped.
Include the relevant headers explicitly and drop superfluous ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-6-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Sorting headers alphabetically helps locating duplicates, and makes it
easier to figure out where to insert new headers.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-5-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-mfd-v1-3-43f4d86d01d1@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-mfd-v1-2-43f4d86d01d1@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-mfd-v1-1-43f4d86d01d1@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the root directory. Further improvements by
this change: automatic support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091234.22170-1-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: automatic clean up on removal, support of
multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091426.22258-2-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
The BCM590xx PMUs have two I2C registers for reading the PMU ID
and revision. The revision is useful for subdevice drivers, since
different revisions may have slight differences in behavior (for
example - BCM59054 has different regulator configurations for
revision A0 and A1).
Check the PMU ID register and make sure it matches the DT compatible.
Fetch the digital and analog revision from the PMUREV register
so that it can be used in subdevice drivers.
Also add some known revision values to bcm590xx.h, for convenience
when writing subdevice drivers.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-4-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The BCM59054 is another chip from the BCM590xx line of PMUs, commonly
used on devices with the BCM21664/BCM23550 chipsets.
Prepare the BCM590xx driver for supporting other devices by adding the
PMUID register values for supported chip types and store them in the
MFD data struct as "pmu_id". (These will be checked against the actual
PMUID register values in a later commit.)
Then, add a DT compatible for the BCM59054, and provide the PMU ID as
OF match data.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-3-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-25-jirislaby@kernel.org
Add support for STM32MP25 SoC.
A new hardware configuration register (HWCFGR2) has been added, to gather
number of capture/compare channels, autonomous mode and input capture
capability. The full feature set is implemented in LPTIM1/2/3/4. LPTIM5
supports a smaller set of features. This can now be read from HWCFGR
registers.
Add new registers to the stm32-lptimer.h: CCMR1, CCR2, HWCFGR1/2 and VERR.
Update the stm32_lptimer data struct so signal the number of
capture/compare channels to the child devices.
Also Remove some unused bit masks (CMPOK_ARROK / CMPOKCF_ARROKCF).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250429125133.1574167-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96806 is from the software perspective almost identical to
the ROHM BD96802. The main difference is different voltage tuning
ranges. Add support differentiating these PMICs based on the compatible,
and invoking the regulator driver with correct IC type.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ccc95ae33613648fdcba08915777d945412ac5c4.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96805 is from the software perspective almost identical to
the ROHM BD96801. The main difference is different voltage tuning
ranges. Add support differentiating these PMICs based on the compatible,
and invoking the regulator driver with correct IC type.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/8680097dc083f191bea56d3ac7c6fe5c005644ec.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96802 PMIC looks from software point of view a lot like ROHM
BD96801 PMIC. Just with reduced number of voltage rails. Both PMICs
provide two physical IRQ lines referred as INTB and ERRB and contain
blocks implementing regulator controls and a weatchdog. Hence it makes
sense to use same MFD core for both PMICs.
Add support for ROHM BD96802 scalable companion PMIC to the BD96801
core driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/05957d194425a79a4f35f287695c3d9ca2ed1ae2.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The resources generated in the BD96801 MFD driver are only visible to
the sub-drivers whose resource fields they are added. This makes
abbreviating the resource name with the IC name pointless. It just adds
confusion in those sub-drivers which do not really care the exact model
that generates the IRQ but just want to know the purpose IRQ was
generated for. This is a preparatory fix to simplify adding support for
ROHM BD96802 PMIC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0b39a793d925651b1ec2d78e92d47a24849d216b.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Prepare for adding support for BD96802 which is very similar to BD96801.
Separate chip specific data into own structure which can be picked based
on the type of the IC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/826f9aa28795a2aa70ea41a3688ff9a83ec25a98.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----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=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
This doesn't affect how the code works because there are some implicit
casts, but the "ret" variable is used to hold negative error codes so
it should be type int.
Declare it as "int" instead of "unsigned int".
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e812dfa-e216-4e40-bbf0-d0b63b110bb0@stanley.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
As part of the pcf50633 removal, take out it's irq code
(which includes one bit still called from the core, but it'll
go soon).
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-9-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: 998f70d180 ("mfd: Add base driver for qnap-mcu devices")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250310031145.650950-1-nichen@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Add an mfd_cell for mt6359-accdet and describe its IRQ resources to
allow the mt6359-accdet driver to probe.
Signed-off-by: Andrew Perepech <andrew.perepech@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20250305-mt6359-accdet-dts-v4-2-e5ffa5ee9991@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
pcap_adc_sync() was added in 2009 by commit 13a09f93d2 ("mfd: add PCAP
driver") but has remained unused; the async version is still used.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250306011027.257021-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
With commit dcbb01fbb7 ("x86/pci: Remove old STA2x11 support"), the core
driver for STA2x11 is not needed and cannot be built anymore.
Remove the driver and its header file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250303100055.372689-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
The off_gpios could be NULL. Add missing check in the kb3930_probe().
This is similar to the issue fixed in commit b1ba8bcb2d
("backlight: hx8357: Fix potential NULL pointer dereference").
This was detected by our static analysis tool.
Cc: stable@vger.kernel.org
Fixes: ede6b2d1df ("mfd: ene-kb3930: Add driver for ENE KB3930 Embedded Controller")
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250224233736.1919739-1-chenyuan0y@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a consistency check to avoid assigning an invalid value to
max_register due to a possible DT misconfiguration.
Suggested-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Link: https://lore.kernel.org/r/20250212184524.585882-1-ezulian@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Utilise devm_*() managed resource helpers for freeing IRQs instead.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Use chip ID and chip_data struct to differentiate between 3 PMIC devices in
probe(). Add TPS65214 resource information. Update descriptions and
copyright information to reflect the driver supports 3 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-6-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use chip ID and chip_data struct to differentiate between devices in
probe(). Add TPS65215 resource information. Update descriptions and
copyright information to reflect the driver supports 2 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-5-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The chipid macro/variable and regmap_read function call is not needed
because the TPS65219_REG_TI_DEV_ID register value is not a consistent value
across TPS65219 PMIC config versions. Reading from the DEV_ID register
without a consistent value to compare it to isn't useful. There isn't a
way to verify the match data ID is the same ID read from the DEV_ID device
register. 0xF0 isn't a DEV_ID value consistent across TPS65219 NVM
configurations.
For TPS65215, there is a consistent value in bits 5-0 of the DEV_ID
register. However, there are other error checks in place within probe()
that apply to both PMICs rather than keeping this isolated check for one
PMIC.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-4-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ACPI ID table is defined globally without an #ifdef check for CONFIG_ACPI,
so ACPI_PTR() makes no sense here. Also note, driver depends on ACPI anyway.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205122536.631252-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
LAN969x uses the AT91 USART IP so make it selectable for ARCH_LAN969X.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250131171739.1044701-2-robert.marko@sartura.hr
Signed-off-by: Lee Jones <lee@kernel.org>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250129152828.1802315-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250129152823.1802273-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
If offset end up being high enough, right hand expression in functions
like sm501_gpio_set() shifted left for that number of bits, may
not fit in int type.
Just in case, fix that by using BIT() both as an option safe from
overflow issues and to make this step look similar to other gpio
drivers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: f61be273d3 ("sm501: add gpiolib support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20250115171206.20308-1-n.zhandarovich@fintech.ru
Signed-off-by: Lee Jones <lee@kernel.org>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192538.911970-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for STM32MP25 SoC. Use newly introduced compatible, to handle
new features.
Identification and hardware configuration registers allow to read the
timer version and capabilities (counter width, number of channels...).
So, rework the probe to avoid touching ARR register by simply read the
counter width when available. This may avoid messing with a possibly
running timer.
Also add useful bit fields to stm32-timers header file.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for Samsung's S2MPU05 PMIC. It's the primary PMIC used by
Exynos7870 devices. It houses regulators (21 LDOs and 5 BUCKs) and a RTC
clock device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-2-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
A recent discussion has revealed that using DPM_FLAG_SMART_SUSPEND
unconditionally is generally problematic because it may lead to
situations in which the device's runtime PM information is internally
inconsistent or does not reflect its real state [1].
For this reason, change the handling of DPM_FLAG_SMART_SUSPEND so that
it is only taken into account if it is consistently set by the drivers
of all devices having any PM callbacks throughout dependency graphs in
accordance with the following rules:
- The "smart suspend" feature is only enabled for devices whose drivers
ask for it (that is, set DPM_FLAG_SMART_SUSPEND) and for devices
without PM callbacks unless they have never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for the device's parent unless the parent does not take
children into account or it has never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for one of the device's suppliers taking runtime PM into
account unless that supplier has never had runtime PM enabled.
Namely, introduce a new device PM flag called smart_suspend that is only
set if the above conditions are met and update all DPM_FLAG_SMART_SUSPEND
users to check power.smart_suspend instead of directly checking the
latter.
At the same time, drop the power.set_active flage introduced recently
in commit 3775fc538f ("PM: sleep: core: Synchronize runtime PM status
of parents and children") because it is now sufficient to check
power.smart_suspend along with the dev_pm_skip_resume() return value
to decide whether or not pm_runtime_set_active() needs to be called
for the device.
Link: https://lore.kernel.org/linux-pm/CAPDyKFroyU3YDSfw_Y6k3giVfajg3NQGwNWeteJWqpW29BojhQ@mail.gmail.com/ [1]
Fixes: 7585946243 ("PM: sleep: core: Restrict power.set_active propagation")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Link: https://patch.msgid.link/1914558.tdWV9SEqCh@rjwysocki.net
Commit ba5095ebbc ("mfd: syscon: Allow syscon nodes without a
"syscon" compatible") broke drivers which call device_node_to_regmap()
on nodes without a "syscon" compatible. Restore the prior behavior for
device_node_to_regmap().
This also makes using device_node_to_regmap() incompatible with
of_syscon_register_regmap() again, so add kerneldoc for
device_node_to_regmap() and syscon_node_to_regmap() to make it clear
how and when each one should be used.
Fixes: ba5095ebbc ("mfd: syscon: Allow syscon nodes without a "syscon" compatible")
Reported-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nishanth Menon <nm@ti.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250124191644.2309790-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
- Remove unused platform driver support for syscon.
- Allow syscon nodes to be registered without a "syscon" compatible string.
- Make `platform_data` pointer const in struct mfd_cell.
- Revert support for multiple AXP PMICs to avoid regressions.
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation.
- Store the result from fault_log() for use by other sub-components.
- Fix an invalid regmap-config max_register value.
- Add another Gemini Lake ISA bridge PCI device ID.
- Use devm_register_power_off_handler() to simplify code.
- Add support for QNAP microcontroller units, including LEDs, input, and hwmon.
- Use MFD_CELL macros and remove unused code.
- Add support for AAEON UP board FPGA.
- Remove unused includes.
- Fix various typos and compatibility issues in multiple bindings.
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424.
- Convert several bindings to YAML schema.
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly.
- Fix rohm,bd71815 bindings by correcting resistor values and typos.
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon.
- Adjust the file entry for the qnap-mcu header in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=3HQm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
of_syscon_register_regmap() was added for nodes which need a custom
regmap setup. It's not really correct for those nodes to claim they are
compatible with "syscon" as the default handling likely doesn't work in
those cases. If device_node_get_regmap() happens to be called first,
then of_syscon_register() will be called and an incorrect regmap will be
created (barring some other error). That may lead to unknown results in
the worst case. In the best case, of_syscon_register_regmap() will fail
with -EEXIST. This problem remains unless these cases drop "syscon" (an
ABI issue) or we exclude them using their specific compatible. ATM,
there is only one user: "google,gs101-pmu"
There are also cases of adding "syscon" compatible to existing nodes
after the fact in order to register the syscon. That presents a
potential DT ABI problem. Instead, if there's a kernel change needing a
syscon for a node, then it should be possible to allow the kernel to
register a syscon without a DT change. That's only possible by using
of_syscon_register_regmap() currently, but in the future we may want to
support a match list for cases which don't need a custom regmap.
With this change, the lookup functions will succeed for any node
registered by of_syscon_register_regmap() regardless of whether the node
compatible contains "syscon".
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-3-4f56d750541d@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The platform driver is dead code. It is not used by DT platforms since
commit bdb0066df9 ("mfd: syscon: Decouple syscon interface from
platform devices") which said:
For non-DT based platforms, this patch keeps syscon platform driver
structure so that syscon can be probed and such non-DT based drivers
can use syscon_regmap_lookup_by_pdev API and access regmap handles.
Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
we can completely remove platform driver of syscon, and keep only helper
functions to get regmap handles.
The last user of syscon_regmap_lookup_by_pdevname() was removed in 2018.
syscon_regmap_lookup_by_pdevname() was then removed in 2019, but that
commit failed to remove the rest of the platform driver.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-2-4f56d750541d@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
It is possible for multiple, simultaneous callers calling
device_node_get_regmap() with the same node to fail to find an entry in
the syscon_list. There is a period of time while the first caller is
calling of_syscon_register() that subsequent callers also fail to find
an entry in the syscon_list and then call of_syscon_register() a second
time.
Fix this by keeping the lock held until after of_syscon_register()
completes and adds the node to syscon_list. Convert the spinlock to a
mutex as many of the functions called in of_syscon_register() such as
kzalloc() and of_clk_get() may sleep.
Fixes: bdb0066df9 ("mfd: syscon: Decouple syscon interface from platform devices")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-1-4f56d750541d@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Use MFD_CELL macro helpers instead of plain struct properties, which makes
the code shorter with the common defined MFD cell attributes.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-2-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.
This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.
This commit adds support for UP and UP Squared boards.
Based on the work done by Gary Wang <garywang@aaeon.com.tw>.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Other sub-components (da9052-wdt) could use the result to determine
reboot cause. Expose the result by make it part of the da9052 structure.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-1-95a5756e9ac8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Currently the device is powered down in the remove callback, however
all other clean up is done through devres. The problem here is the
MFD children are cleaned up through devres. As this happens after
the remove callback has run, this leads to the incorrect ordering
where the child remove functions run after the device has been powered
down. Put the power down into devres as well such that everything runs
in the expected order.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Some SoundWire controllers take a very long time to fully power up. As
such, increase the timeout that the cs42l43 driver will wait for the
device to initially appear on the bus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-3-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The GPIO framework supports specifying if a GPIO is active low or
high and will invert accordingly. Whilst specifying this is part of
the normal GPIO definition flow on device tree systems, it is a DSD
extension under ACPI, that Windows doesn't really use. This means most
ACPI systems do not set the polarity of the pin.
The current cs42l43 driver assumes it is setting the level of the line
directly, which is actually the case on all current systems and likely
most future ones. However if the part was used in a device tree system
or an ACPI system that actually used the DSD extensions this would get
inverted, causing the driver to fail probe. As the driver always knows
the polarity of its own reset line, use the raw set API making the
intention to set the level directly clear and to avoid any such future
issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-2-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Newer bios patch firmware versions now require use of the shadow register
interface, which was previously only required by the full firmware, update
the check accordingly.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241205115822.2371719-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
On N4100 / N4120 Gemini Lake SoCs the ISA bridge PCI device-id is 31e8
rather the 3197 found on e.g. the N4000 / N4020.
While at fix the existing GLK PCI-id table entry breaking the table
being sorted by device-id.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241114193808.110132-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.
This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.
Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.
So on shutdown the MCU needs to be turned off separately before the
main PMIC.
The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.
The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
Add a module parameter to allow configuring the IRQ number, similar to the
handling of the GPIO IRQ.
The new code and module parameter refer to the I2C controller as "I2C1",
as the TQMx86 PLD actually contains a second I2C controller, for which
driver support will be added in the future.
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/c1b0769e00a8a4e463cffe725e939b0e5c2992c8.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO IRQ setup can fail either because an invalid IRQ was passed as a
parameter, or because the GPIO controller does not support interrupts.
Neither is severe enough to stop the whole probe; simply disable IRQ
support in the GPIO resource when setup fails.
The code is made a bit more robust by introduing an enum for the
resource list indices instead of assuming that the IRQ is at index 0.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/2b5522362098d54c6203be6da95bbc545a21fd49.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Move IRQ setup into a helper function. The string "GPIO" for error
messages is replaced with a label argument to prepare for reusing the
function for the I2C IRQ.
No functional change intended.
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/97f481334f480a113b7076e76f994e0e73ee5aa5.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
