The UVC driver provides two metadata types V4L2_META_FMT_UVC, and
V4L2_META_FMT_D4XX. The only difference between the two of them is that
V4L2_META_FMT_UVC only copies PTS, SCR, size and flags, and
V4L2_META_FMT_D4XX copies the whole metadata section.
Now we only enable V4L2_META_FMT_D4XX for the Intel D4xx family of
devices, but it is useful to have the whole metadata payload for any
device where vendors include other metadata, such as the one described by
Microsoft:
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/mf-capture-metadata
This patch introduces a new format V4L2_META_FMT_UVC_MSXU_1_5, that is
identical to V4L2_META_FMT_D4XX.
Let the user enable this format with a quirk for now. This way they can
test if their devices provide useful metadata without rebuilding the
kernel. They can later contribute patches to auto-quirk their devices.
We will also work in methods to auto-detect devices compatible with this
new metadata format.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-4-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
video_translate_cmd() can be useful for drivers to convert between the
VIDIOC_*32 and VIDIOC_ defines. Let's export it.
Now that the function is exported, use this opportunity to rename the
function with the v4l2_ prefix, that is less ambiguous than video_
The VIDIOC_*32 defines are not accessible by the drivers, they live in
v4l2-compat-ioctl32.c.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-6-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Renesas Camera Receiver Unit in the RZ/V2H SoC can output RAW
data captured from an image sensor without conversion to an RGB/YUV
format. In that case the data are packed into 64-bit blocks, with a
variable amount of padding in the most significant bits depending on
the bitdepth of the data. Add new V4L2 pixel format codes for the new
formats, along with documentation to describe them.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250630222734.2712390-1-dan.scally@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
C3ISP_PARAMS is the C3 ISP Parameters format.
C3ISP_STATS is the C3 ISP Statistics format.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The conditional (type == V4L2_TUNER_RADIO) always evaluates true due to the
earlier check for (type != V4L2_TUNER_RADIO) (line 2826)
CID: 1226742
Signed-off-by: Chris Green <chris.e.green@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
10-bit buffers.
NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
NV12 and NV16, using 10-bit components with no padding between each
component. Instead, a group of 4 luminance/chrominance samples are
stored over 5 bytes in little endian order:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' and '20' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a
multiple of 8 for NV15 and 4 for NV20.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Standardize reporting of rectangles to (t,l)/wxh.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We use this logic in a couple of places. Refactor into a function.
No functional change expected from this patch.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All the drivers either use the control framework or provide a
vidiod_ext_ctrl. We can remove this callback.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All the drivers either use the control framework or provide a
vidioc_g_ext_ctrls callback. We can remove this callback.
Thanks for your service!
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All the drivers either use the control framework or provide a
vidioc_query_ext_ctrl. We can remove this callback to reduce the
temptation of new drivers to implement it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
v4l2_queryctrl is a subset of v4l2_query_ext_ctrl. If the driver does
not implement v4l2_queryctrl we can implement it with
v4l2_query_ext_ctrl.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
Add two meta formats for PiSP FE: V4L2_META_FMT_RPI_FE_CFG and
V4L2_META_FMT_RPI_FE_STATS. The former is used to provide configuration
for the FE and the latter is used to read the statistics from the FE.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The formats added by this patch are:
V4L2_PIX_FMT_Y16I
Interlaced lumina format primary use in RealSense Depth cameras with
stereo stream for left and right image sensors.
Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/568efbd75290e286b8ad9e7347b5f43745121020.camel@intel.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The rkisp1 driver stores ISP configuration parameters in the fixed
rkisp1_params_cfg structure. As the members of the structure are part of
the userspace API, the structure layout is immutable and cannot be
extended further. Introducing new parameters or modifying the existing
ones would change the buffer layout and cause breakages in existing
applications.
The allow for future extensions to the ISP parameters, introduce a new
extensible parameters format, with a new format 4CC. Document usage of
the new format in the rkisp1 admin guide.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The v4l_print_create_buffers() function was missing a ', ' in
the pr_cont call, leading to logs like this:
[93293.533425] video0: VIDIOC_CREATE_BUFS: index=0, count=0, memory=dmabuf, capabilities=0x00000297, max num buffers=32type=vid-cap, width=0, height=0, pixelformat=.... little-endian (0x00000000),
field=any, bytesperline=0, sizeimage=0, colorspace=0, flags=0x0, ycbcr_enc=0, quantization=0, xfer_func=0
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Add Raspberry Pi compressed RAW Bayer formats.
The compression algorithm description is provided by Nick Hollinghurst
<nick.hollinghurst@raspberrypi.com> from Raspberry Pi.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add format description for the PiSP Back End configuration parameter
buffer.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the user needs to know what went wrong for S_ROUTING, copy array
arguments back to the user.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set (and unset) the V4L2_FMT_FLAG_META_LINE_BASED flag in struct
v4l2_fmtdesc based on the format after returning the driver callback for
enumerating formats. This way the drivers don't need to care about the
flag.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
VIDIOC_REMOVE_BUFS ioctl allows to remove buffers from a queue.
The number of buffers to remove in given by count field of
struct v4l2_remove_buffers and the range start at the index
specified in the same structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: vidioc-remove-bufs.rst: mention no bufs are freed on error]
In most cases the is_valid_ioctl() macro is used to check if an ioctl is
valid, except in one place. Use it there as well as it makes the code
easier to read.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When ioctl debugging is turned on, the v4l_printk_ioctl() is used
to log the ioctl that is called. It uses an array of ioctl information
to log the ioctl name and it correctly checks for out-of-bound indexing
of that array. However, the array may have holes since not all ioctl
numbers are used. In that case the name of the ioctl is NULL.
It is harmless (printk handles NULL pointers), but not intended. Instead
use the v4l2_is_known_ioctl() function to determine if the ioctl
information is available or not.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use one of the struct v4l2_create_buffers reserved bytes to report
the maximum possible number of buffers for the queue.
V4l2 framework set V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS flags in queue
capabilities so userland can know when the field is valid.
Does the same change in v4l2_create_buffers32 structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add HEXTILE compressed format which is defined in Remote Framebuffer
Protocol (RFC 6143, chapter 7.7.4 Hextile Encoding) and is used by
Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Define one uncompressed capture format V4L2_PIX_FMT_MT2110R in order to
support 10bit for H264 in mt8195.
Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
Co-developed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Define one uncompressed capture format V4L2_PIX_FMT_MT2110T in order to
support 10bit for AV1/VP9/HEVC in mt8195.
Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
Co-developed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
NV15_4L4 is the 10-bits per component 4x4 tiled format.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch adds the AOMedia Video 1 (AV1) kernel uAPI.
This design is based on currently available AV1 API implementations and
aims to support the development of AV1 stateless video codecs
on Linux.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ABGR64_12 is a reversed RGB format with alpha channel last,
12 bits per component like ABGR32,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
BGR48_12 is a reversed RGB format with 12 bits per component like BGR24,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
YUV48_12 is a YUV format with 12-bits per component like YUV24,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
[hverkuil: replaced a . by ,]
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Y012 is a luma-only formats with 12-bits per pixel,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
P012 is a YUV format with 12-bits per component with interleaved UV,
like NV12, expanded to 16 bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
And P012M has two non contiguous planes.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
RealVideo, or also spelled as Real Video, is a suite of proprietary
video compression formats developed by RealNetworks -
the specific format changes with the version.
RealVideo codecs are identified by four-character codes.
RV30 and RV40 are RealNetworks' proprietary H.264-based codecs.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sorenson Spark is an implementation of H.263 for use
in Flash Video and Adobe Flash files.
Sorenson Spark is an incomplete implementation of H.263.
It differs mostly in header structure and ranges of the coefficients.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make sure this field is always 0 since destructive overlays
are no longer supported.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are no longer any drivers that support clipping and bitmap
support for the capture or output overlay interfaces, so drop
this.
Always set the bitmap, clips and clipcount fields to 0, and
remove the compat32 support.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0XIw
-----END PGP SIGNATURE-----
Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
stkwebcam, tm6000, vpfe_capture and zr364xx
- saa7146 recovered from staging/deprecated. We opted to give ti a
chance, and, instead of deprecating it, the intention is to write
patches migrating it from VB1 to VB2.
- av7110 returned from staging/deprecated/ to staging/ as we're not
planning on dropping it any time soon
- media controller API has gained experimental support for G_ROUTING
and streams API. No drivers use it right now. We're planning to add
one after -rc1, giving some time to experience the API and eventually
have changes during the next development cycle
- New sensor drivers: imx296, imx415, ov8858
- Atomisp had lots of changes, specially on its sensor's interface,
making atomisp sensor drivers closer to normal sensor drivers
- media controller kAPI has gained some helpers to traverse pipelines
- uvcvideo now better support power line control
- lots of bug fixes, cleanups and driver improvements
* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
media: imx-mipi-csis: Check csis_fmt validity before use
media: v4l2-subdev.c: clear stream field
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
media: imx-pxp: convert to regmap
media: imx-pxp: Use non-threaded IRQ
media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
media: imx-pxp: Implement frame size enumeration
media: imx-pxp: Pass pixel format value to find_format()
media: imx-pxp: Add media controller support
media: imx-pxp: Don't set bus_info manually in .querycap()
media: imx-pxp: Sort headers alphabetically
media: imx-pxp: add support for i.MX7D
media: imx-pxp: make data_path_ctrl0 platform dependent
media: imx-pxp: disable LUT block
media: imx-pxp: explicitly disable unused blocks
media: imx-pxp: extract helper function to setup data path
media: imx-pxp: detect PXP version
media: dt-bindings: media: fsl-pxp: convert to yaml
...
Add support for subdev internal routing. A route is defined as a single
stream from a sink pad to a source pad.
The userspace can configure the routing via two new ioctls,
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can
implement the functionality with v4l2_subdev_pad_ops.set_routing().
- Add sink and source streams for multiplexed links
- Copy the argument back in case of an error. This is needed to let the
caller know the number of routes.
- Expand and refine documentation.
- Make the 'routes' pointer a __u64 __user pointer so that a compat32
version of the ioctl is not required.
- Add struct v4l2_subdev_krouting to be used for subdevice operations.
- Fix typecasing warnings
- Check sink & source pad types
- Add 'which' field
- Routing to subdev state
- Dropped get_routing subdev op
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
add contiguous nv12 tiled format nv12_8l128 and nv12_10be_8l128
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
