The pixel_array control size was calculated incorrectly:
the dimensions were swapped (dims[0] should be the height), and the
values should be the width or height divided by PIXEL_ARRAY_DIV
and rounded up. So don't use roundup, but use DIV_ROUND_UP instead.
This bug is harmless in the sense that nothing will break, except that
it consumes way too much memory for this control.
Fixes: 6bc7643d1b ("media: vivid: add pixel_array test control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Refactor parity calculations to use the standard parity8() helper.
This change eliminates redundant implementations.
Co-developed-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=4pGJ
-----END PGP SIGNATURE-----
Merge tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
Standardize reporting of rectangles to (t,l)/wxh.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add 3 more common resolution for webcams. This is required to increase
the test coverage of unit tests based on vivid.
Co-developed-by: Hidenori Kobayashi <hidenorik@chromium.org>
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Tested-by: Hidenori Kobayashi <hidenorik@chromium.org> # v4l2-compliance,
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit f0b4a2c037 ("media: vivid: Extend FPS rates offered by
simulated webcam") we do not require twice as many intervals as sizes. In
fact, now we have 13 intervals and 6 sizes.
Fix the comment.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for the mulitiplaner API. The device can now act as
either a multi-planar or a single-planar device depending on a module
parameter, similar to the way vivid behaves.
Multiplanar support was added by implementing the appropate
try/get/set mplane functions, and by modifying the queue_setup() and
buf_prepare() functions to handle multiple planes. Implementation
was inspired by vivid.
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Clean up vidioc_try_fmt with the following changes:
1. remove unsused vim2m_fmt parameter
2. use clamp() macro to restrain width/height bounds
3. use ALIGN() macro to align width/height
4. use v4l2_fill_pixfmt to set bytesperline/sizeimage
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It's not enough to have a dependency on CONFIG_FB, as that can be in
a loadable module when vivid itself is builtin:
drivers/media/test-drivers/vivid/vivid-osd.o: in function `vivid_fb_init':
vivid-osd.c:(.text+0xdc0): undefined reference to `fb_alloc_cmap'
vivid-osd.c:(.text+0xe26): undefined reference to `register_framebuffer'
Change the dependency to only allow configurations that can be built,
but change the FB to FB_CORE so this is also possible when using
DRM with FB compatibility rather than full fbdev.
Fixes: 20889ddede ("media: vivid: Introduce VIDEO_VIVID_OSD")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the v4l2_info() call displaying the video device name after the
device is actually registered.
This fixes a bug where the driver was always displaying "/dev/video0"
since it was reading from the vfd before it was registered.
Fixes: cf7f34777a ("media: vim2m: Register video device after setting up internals")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
vivid-osd depends on CONFIG_FB, which can be a large dependency. Introduce
CONFIG_VIDEO_VIVID_OSD to control enabling support for testing output
overlay.
Suggested-by: Slawomir Rosek <srosek@google.com>
Co-developed-by: Slawomir Rosek <srosek@google.com>
Signed-off-by: Slawomir Rosek <srosek@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: add newline to squash checkpatch warning]
Most references to fb_info are already within vivid-osd.c. This patch
moves the remaining references into vivid-osd.c.
We also take this opportunity to make the function names in vivid-osd
more consistent.
This is a preparation patch to make CONFIG_FB optional for vivid.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This control represents a generic read/write rectangle.
It supports V4L2_CTRL_WHICH_MIN/MAX_VAL.
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-3-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The visl driver supports both frame and slice mode, with and without a
start-code. But, the range and default for these enum controls was not
set, which currently limits the decoder to enums with a value of 0. Fix
this by setting the decoder mode and start code controls for both the
H.264 and HEVC codecs.
Fixes: 0c078e310b ("media: visl: add virtual stateless decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Artem reported that the CPU load was 100% when capturing from
vivid at low resolution with ffmpeg.
This was caused by:
while (time_is_after_jiffies(cur_jiffies + wait_jiffies) &&
!kthread_should_stop())
schedule();
If there are no other processes running that can be scheduled,
then this is basically a busy-loop.
Change it to wait_event_interruptible_timeout() which doesn't
have that problem.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219570
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=25BS
-----END PGP SIGNATURE-----
Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- removal of the old omap4iss media driver
- mantis: remove orphan mantis_core.h
- add support for Raspberypi CFE
- uvc driver got a co-maintainer
- main media tree moved to git://linuxtv.org/media.git
- lots of driver cleanups, updates and fixes
* tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits)
docs: media: update location of the media patches
MAINTAINERS: update location of media main tree
media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer
media: platform: samsung: s5p-jpeg: Remove deadcode
media: qcom: camss: Add MSM8953 resources
media: dt-bindings: Add qcom,msm8953-camss
media: qcom: camss: implement pm domain ops for VFE v4.1
media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available
media: adv7180: Also check for "adi,force-bt656-4"
media: dt-bindings: adv7180: Document 'adi,force-bt656-4'
media: mgb4: Fix inconsistent input/output alignment in loopback mode
media: replace obsolete hans.verkuil@cisco.com alias
Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc
media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls
media: atomisp: Add check for rgby_data memory allocation failure
media: atomisp: remove redundant re-checking of err
media: atomisp: Fix spelling errors reported by codespell
media: atomisp: Remove License information boilerplate
media: atomisp: Fix typos in comment
media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h
...
-----BEGIN PGP SIGNATURE-----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=o4ww
-----END PGP SIGNATURE-----
Merge tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcxMXceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1IgH/A3O7KIy/VR7D7O3
usbLqk1V+YWs/NsVdewEL/SYfXjCxqnejdk/AvN3ZAIxFeMHhAmcSCKno3zKgK9L
ML4kDrz22dPlA0XncNM8qKTCqAMgXTur1wafv3NAjutg0D3eHvAp0BW0GO5px93G
+kt3kOY32UaB+2Fl1GIub777pRi5U4u5AboQTu3x0TdRZJtV1pqgeddGoymNn6mi
xmMVbY3r5MXJQyHntoT9FIuxK3d+jGcgRHP5RWr53+vAUEFdlXiGcJV4dUXsuQNa
sEKJutCaUqQeiamjoo4bRZO7/2OAPX9Sv7sNIXD/irZZJmCcWr+GDCcUmL69Mjg7
7mx6XrM=
=HYUx
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
The old hans.verkuil@cisco.com email address was discontinued years ago.
Replace it with the correct hansverk@cisco.com email.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stateful codecs must support the V4L2_CID_MIN_BUFFERS_FOR_OUTPUT
and V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controls. The vicodec driver
was missing support for these controls. Add them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846 ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
The maximum number of buffers that can be requested was increased to
64 for the video capture queue. But video capture used a must_blank
array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an
out-of-bounds write when using buffer indices >= 32.
Create a new define MAX_VID_CAP_BUFFERS that is used to access the
must_blank array and set max_num_buffers for the video capture queue.
This solves a crash reported by:
https://bugzilla.kernel.org/show_bug.cgi?id=219258
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: cea70ed416 ("media: test-drivers: vivid: Increase max supported buffers for capture queues")
Cc: stable@vger.kernel.org
Since the V4L2_FMTDESC_FLAG_ENUM_ALL flag mostly targets stateless
decoder pixel-format enumeration, update visl test driver to use it.
When V4L2_FMTDESC_FLAG_ENUM_ALL flag is set let the driver returns
one more pixel format.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Include <linux/prandom.h> to allow the removal of legacy
inclusion of <linux/prandom.h> from <linux/random.h>.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Vicodec will ignore en/decoder commands if the CAPTURE queue is not
streaming. But this prevents CMD_STOP from being used during a dynamic
resolution change to mark the last source buffer. Since CMD_STOP is
ignored, but doesn’t fail, there is no warning that the command needs to
be resent, and CAPTURE will continue to attempt to dequeue buffers
waiting, futilely, for one with V4L2_BUF_FLAG_LAST.
Fix this problem by carrying out en/decoder commands even if CAPTURE is
not streaming.
Fixes: d17589afa9 vicodec: improve handling of ENC_CMD_STOP/START
Reported by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This makes it possible to test the new CEC_MSG_FL_REPLY_VENDOR_ID flag.
The vivid driver will Feature Abort any messages that do not have
exactly 1 payload byte. It ignores messages where the payload byte is
even, and where it is odd it will reply with the payload byte incremented
by 1. Basically a simple ping-pong command.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of using hardwired video loopback limited to a single vivid
instance, use the new 'Connected To' controls to only loopback if an
HDMI or S-Video input is connected to another output, which can be
in another vivid instance. Effectively this emulates connecting and
disconnecting an HDMI/S-Video cable.
The Loop Video control is dropped since it has now been replaced by
the new 'Connected To' controls. The Display Present has also been
dropped since it no longer fits.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Co-developed-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
The video loopback functionality in vivid is very crude. What we really
want is to be able to emulate connecting an HDMI or S-Video input to
an HDMI or S-Video output, and the input and output can be in different
vivid instances.
Effectively this emulates what happens when you physically connect an
HDMI or S-Video cable between two devices.
In particular, this makes prototyping with vivid much more realistic.
This patch creates a menu control for each HDMI or S-Video input. The
menu control starts with "Test Pattern Generator" and "None" (i.e.
disconnected). After that up to 62 HDMI or S-Video outputs are listed
that you can connect the input to.
If there are more than 62 HDMI or S-Video outputs, then those will not
be included in the menu (currently menucontrols have max 64 entries).
If an input is connected to an output, then all other 'Connected To'
controls are updated to exclude that output to avoid having multiple
inputs connected to the same output.
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: use u8 in loops in vivid_create_controls() to avoid truncate warning]
Add the instance number before the input or output number.
So "HDMI 1" becomes "HDMI 000-1".
This is helps identifying which input or output belongs to
which vivid instance.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When setting the EDID it would attempt to update two controls
that are only present if there is an HDMI output configured.
If there isn't any (e.g. when the vivid module is loaded with
node_types=1), then calling VIDIOC_S_EDID would crash.
Fix this by first checking if outputs are present.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Returning an EDID for a connected output would modify the original
input EDID with the physical address of the output. That causes
problems, and it should just update the physical address of the
output EDID.
Update vivid_hdmi_edid to set the physical address to 0.0.0.0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
While queue_setup was correct for CREATE_BUFS support for
video devices, for VBI, SDR and touch devices it was wrong.
This was found after adding new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In several places a division by fmt->vdownsampling[p] was
missing in the sizeimage[p] calculation, causing incorrect
behavior for multiplanar formats were some planes are smaller
than the first plane.
Found by new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_scaler_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_scaler_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_debayer_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_debayer_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the active formats and crop rectangle in the subdevice active
state. This simplifies implementation of the format and selection
accessors, and allows using the v4l2_subdev_get_fmt() helper to
implement the .get_fmt() operation.
The active configuration that is used in the .process_frame() handler is
still stored in the vimc_sensor_device structure. The driver could
instead access the active state in the .process_frame() handler, but the
required locking could interfere with the real time constraints of the
frame processing. This data would be stored in registers in the
.s_stream() handler for real hardware, storing it in dedicated storage
thus mimics a real driver. To differentiate them from the rest of the
device private data, move the corresponding fields to a sub-structure of
vimc_sensor_device named hw.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Finalize subdev initialization for all subdevs that provide a
.init_state() operation. This creates an active state for all those
subdevs, which subsequent patches will use to simplify the
implementation of individual vimc entities.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Initialize the subdev internal_ops field in the vimc_ent_sd_register()
function. This handles the internal ops the same way as the subdev ops,
and prepares for moving to the V4L2 subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The vic_sca_pad enum's name has been shortened to the extreme for no
good reason. Rename it to vimc_scaler_pad.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ent_config array contains data that is never modified. Make it
const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The vimc_ent_type structure contains static pointers to functions, and
no other information that need to be modified after initialization. Make
them const to avoid the risk of arbitrary code execution following an
overflow that would overwrite the structure's contents.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .init_state() operations of the debayer and sensor entities iterate
over the entity's pads. In practice, the iteration covers a single pad
only. Access the pad directly and remove the loops.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Create v4l2-mem2mem helpers for VIDIOC_REMOVE_BUFS ioctl and
make test drivers use it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
