The RZ/V2H(P) SoC does not require a `system` clock for the CSI-2
interface. To accommodate this, introduce a `has_system_clk` bool flag
in the `rzg2l_csi2_info` structure and update the rzg2l_csi2_probe() to
conditionally request the clock only when needed.
This patch is in preparation for adding support for RZ/V2H(P) SoC.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-10-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation for adding support for the RZ/V2H(P) SoC, where the D-PHY
differs from the existing RZ/G2L implementation, introduce a new
rzg2l_csi2_info structure. This structure provides function pointers for
SoC-specific D-PHY enable and disable operations.
Modify rzg2l_csi2_dphy_setting() to use these function pointers instead of
calling rzg2l_csi2_dphy_enable() and rzg2l_csi2_dphy_disable() directly.
Update the device match table to store the appropriate function pointers
for each compatible SoC.
This change prepares the driver for future extensions without affecting
the current functionality for RZ/G2L.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-9-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use newly added devm_pm_runtime_enable() into rzg2l_cru_probe() and
drop unnecessary pm_runtime_disable() from rzg2l_cru_probe() and
rzg2l_csi2_remove().
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-8-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use a local variable for the struct device pointers. This increases code
readability with shortened lines.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-7-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use newly added devm_pm_runtime_enable() into rzg2l_csi2_probe() and
drop error path accordingly. Drop also unnecessary pm_runtime_disable()
from rzg2l_csi2_remove().
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-6-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use a local variable for the struct device pointers. This increases code
readability with shortened lines.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-5-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Earlier versions of the datasheet where unclear about the stride setting
for RAW8 capture formats. Later datasheets clarifies that the stride
only process in this mode for non-image data. For image data the full
stride shall be used. Compare section "RAW: 8 Bits and Embedded 8-Bit
Non-Image Data, User Defined 8-bit Data" vs "RAW: 8 Bits".
Remove the special case from pixel formats that carry image data and
treat it as any other image format.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250402183302.140055-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There are two ways to switch GDSC mode. One is to write the POWER_CONTROL
register and the other is to use dev_pm_genpd_set_hwmode(). However, they
rely on different clock driver flags. dev_pm_genpd_set_hwmode() depends on
the HW_CTRL_TRIGGER flag and POWER_CONTROL register depends on the HW_CTRL
flag.
By default, the dev_pm_genpd_set_hwmode() is used to switch the GDSC mode.
If it fails and dev_pm_genpd_set_hwmode() returns -EOPNOTSUPP, it means
that the clock driver uses the HW_CTRL flag. At this time, the GDSC mode
is switched to write the POWER_CONTROL register.
Clock driver is using HW_CTRL_TRIGGER flag with V6. So hwmode_dev is
always true on using V6 platform. Conversely, if hwmode_dev is false, this
platform must be not using V6. Therefore, replace IS_V6 in poweroff_coreid
with hwmode_dev. Also, with HW_CTRL_TRIGGER flag, the vcodec gdsc gets
enabled in SW mode by default. Therefore, before disabling the GDSC, GDSC
should be switched to SW mode so that GDSC gets enabled in SW mode in the
next enable.
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
[bod: added media prefix]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For the seek case, the input port will be called stream_off and then
stream_on in the driver. Firmware will flush all buffers during stream_off
input port. Therefore, driver needs to queue DPB buffers to firmware
during stream_on input port to ensure that decoder can decode normally
when it receives enough input and output buffers. Otherwise, decoder
will not be able to decode due to lack of DPB buffer even if there are
enough input and output buffers.
Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
[bod: added media prefix]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Video device registering has been moved earlier in the probe function,
but the new order has not been propagated to error handling. This means
we can end with unreleased resources on error (e.g dangling video device
on missing firmware probe aborting).
Fixes: 08b1cf474b ("media: venus: core, venc, vdec: Fix probe dependency error")
Cc: stable@vger.kernel.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For various SoC skews at 4nm CSIPHY 2.1.2 is used. Add in the init sequence
with base control reg offset of 0x1000.
This initial version will support X1E80100. Take the silicon verification
PHY init parameters as a first/best guess pass.
SKEW_CAL is included as received from the qcom silicon init sequence.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently we have an s32 value called delay which has been inherited from
the CamX code for PHY init. This unused value relates to a post-write delay
latching time.
In the silicon test-bench which provides the basis for the CamX code the
write settle times are specified in nanoseconds.
In the upstream kernel we currently take no notice of the delay value and
use all zero in any case.
Nanosecond granularity timing from the perspective of the kernel is total
overkill, however for some PHY init sequences introduction of a settle
delay has a use.
Add support to the 3ph init sequence for microsecond level delay. A
readback of written data would probably accomplish the same thing but,
since the PHY init sequences in the wild provide a delay value - we can
just add support here for that delay and consume the values given.
Generally these delays are probably not necessary but, they do speak to a
theoretical delay that silicon test-benches utilise and therefore are
worthwhile to replicate if the given PHY init sequence has the data.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add silicon enabling support for VFE680 as found on sm8450, x1e and
derivatives thereof.
References work from Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: fix minor checkpatch linelenght splat @ lines 21, 22]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add CSI Decoder (CSID) 680 support to CAMSS. This version of CSID has been
shipped with SM8450 and x1e chips.
References work from Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the CSIPHY id property to find clock names instead of relying on
generating the clock names based on the control-loop index.
x1e80100 has CSIPHY0, CSIPHY1, CSIPHY2 and CSIPHY4 so simple index naming
won't work whereas and 'id' property allows any ordering and any stepping
between the CSIPHY names.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In various places in CAMSS we assume a linear set of declared devices
{csiphy0, csiphy1, csiphy2} which currently works for upstream SoCs but for
upcoming SoCs some of the SoC resources will result in a set such as
{csiphy0, csiphy2} which will break the naive for() loops we have.
Introduce an identity property which resource declarations can populate
hence facilitating non-linear resource naming.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A recent commit refactored the printing of the VFE hardware version, but
(without it being mentioned) also changed the log level from debug to
info.
This results in several hundred lines of repeated log spam during boot
and use, for example, on the Lenovo ThinkPad X13s:
qcom-camss ac5a000.camss: VFE:1 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:0 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:2 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:2 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:3 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:5 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:6 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:4 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:5 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:6 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
...
Suppress the version logging by demoting to debug level again.
Fixes: 10693fed12 ("media: qcom: camss: vfe: Move common code into vfe core")
Cc: stable@vger.kernel.org
Cc: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A recent commit refactored the printing of the CSID hardware version, but
(without it being mentioned) also changed the log level from debug to
info.
This results in repeated log spam during use, for example, on the Lenovo
ThinkPad X13s:
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
Suppress the version logging by demoting to debug level again.
Fixes: f759b8fd30 ("media: qcom: camss: csid: Move common code into csid core")
Cc: stable@vger.kernel.org
Cc: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently the Qualcomm CAMSS driver only supports D-PHY while the
hardware on most SoCs also supports C-PHY. Until this support is added,
check for D-PHY to make it somewhat explicit that C-PHY won't work.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The vsi (video shared information) struct needs to be synchronized
between firmware and host, as a change that is only done in the host
version of the struct but isn't synchronized to the firmware. This can
lead to decoding issues with H264 bitstreams. Highlight this requirement
within the struct descriptions.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a new extended vsi_ext struct besides the existing vsi struct, to
enable calculating the end of the address range of the current working
buffer for architectures, where simply adding the buffer size to the
start of the address range isn't sufficient.
Additionally, on extended architectures, the NAL information can be
fetched directly from the firmware, which allows skipping the parsing
step within the kernel.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Extend the VSI (video shared information) struct to allow sending slice
parameters to SCP, as the parameters have changed on MT8188 architecture.
Remove VSI related information from the common interface to ensure that
the interface is usable by architectures with and without the extended
parameters. The new VSI extensions will be introduced in later patches.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The framebuffer size for decoder instances was being incorrectly set -
inst->vsi_core->fb.y.size was assigned twice consecutively.
Assign the second picinfo framebuffer size to the C framebuffer instead,
which appears to be the intended target based on the surrounding code.
Fixes: 2674486aac ("media: mediatek: vcodec: support stateless hevc decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested on RK3588, this decoder is capable of handling WUHD, so bump the
maximum width and height accordingly.
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a extraneous space after a newline in a mtk_venc_debug message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
By default the amphion decoder will pre-parse 3 frames before starting
to decode the first frame. Alternatively, a block of flush padding data
can be appended to the frame, which will ensure that the decoder can
start decoding immediately after parsing the flush padding data, thus
potentially reducing decoding latency.
This mode was previously only enabled, when the display delay was set to
0. Allow the user to manually toggle the use of that mode via a module
parameter called low_latency, which enables the mode without
changing the display order.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The amphion decoder firmware supports a low latency flush mode for the
HEVC format since v1.9.0. This feature, which is enabled when the
display delay is set to 0, can help to reduce the decoding latency by
appending some padding data to every frame.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Avoid uninitialized variable when both V4L2_TYPE_IS_OUTPUT() and
V4L2_TYPE_IS_CAPTURE() return false.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For now, the Synopsys HDMI HDMI RX Controller is only supported on
Rockchip RK3588 SoCs. Hence add a dependency on ARCH_ROCKCHIP, to
prevent asking the user about this driver when configuring a kernel
without Rockchip SoC support.
Fixes: 7b59b132ad ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The num_clks is set this way:
hdmirx_dev->num_clks = devm_clk_bulk_get_all(dev, &hdmirx_dev->clks);
if (hdmirx_dev->num_clks < 1)
return -ENODEV;
The devm_clk_bulk_get_all() function returns negative error codes so the
hdmirx_dev->num_cks variable needs to be signed for the error handling to
work.
Fixes: 7b59b132ad ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The build fails for 32-bit targets with:
arm-linux-gnueabi-ld: drivers/media/platform/synopsys/hdmirx/snps_hdmirx.o: in function `hdmirx_get_timings':
snps_hdmirx.c:(.text.hdmirx_get_timings+0x46c): undefined reference to `__aeabi_uldivmod'
bt->pixelclock is __u64, which causes the compiler to emit a libcall for
64-bit division. Use the optimized kernel helper, div_u64(), to resolve
this.
Fixes: 7b59b132ad ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move cached EDID that takes 512 bytes to the bottom of struct
snps_hdmirx_dev to improve CPU's cache locality of the struct.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
HDMI audio CODEC is unsupported in the current version of the driver.
Support may come later. Remove HDMI CODEC bits that were left out
by accident to keep code consistent.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Depending on IOMMU_DMA is suspicious, since the low-level DMA ops
internals and MSI helpers is provides are not of interest to general
drivers. In practice it mostly seems to be serving as a dependency on
ARM64 here, so do that properly. The venus driver looks like it won't
actually be useful at runtime without the IOMMU API, so add that too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add check for the return value of clk_enable() to gurantee the success.
Fixes: 002e8f0d59 ("media: stm32-dma2d: STM32 DMA2D driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This loop was recently converted to use for_each_of_graph_port() which
automatically does __cleanup__ on the "port" iterator variable. Delete
the calls to of_node_put(port) to avoid a double put bug.
Fixes: 393194cdf1 ("media: xilinx-tpg: use new of_graph functions")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
An of_node_put(i2c_bus) call was immediately used after a pointer check
for an of_find_i2c_adapter_by_node() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The arguments to rga_lookup_draw_pos() are passed in the wrong order,
rotate mode should be before mirror mode.
Fixes: 558c248f93 ("media: rockchip: rga: split src and dst buffer setup")
Cc: stable@vger.kernel.org
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Returned buffers shouldn't contain V4L2_FIELD_ANY as field. Set the
field to V4L2_FIELD_NONE, if it isn't set.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a possibility of getting page fault if the overall
buffer size is not aligned to 256bytes. Since MFC does read
operation only and it won't corrupt the data values even if
it reads the extra bytes.
Corrected luma and chroma plane sizes for V4L2_PIX_FMT_NV12M
and V4L2_PIX_FMT_NV21M pixel format.
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
omap3isp_print_status() was added in 2011 by
commit 448de7e785 ("[media] omap3isp: OMAP3 ISP core")
but has remained unused.
Remove it (and it's associated #defines).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add initial support for the Synopsys DesignWare HDMI RX
Controller Driver used by Rockchip RK3588. The driver
supports:
- HDMI 1.4b and 2.0 modes (HDMI 4k@60Hz)
- RGB888, YUV422, YUV444 and YCC420 pixel formats
- CEC
- EDID configuration
The hardware also has Audio and HDCP capabilities, but these are
not yet supported by the driver.
Co-developed-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Drop the legacy .s_stream and convert to .{enable|disable}_streams.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Drop the legacy .s_stream and convert to .{enable|disable}_streams.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Convert to subdev state. This allows us to drop the internal mutex and
risp_get_pad_format(), and add streams support in the future.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Instead of directly using V4L2_CID_PIXEL_RATE and calculating the mbps
from that, use v4l2_get_link_freq(), which also supports
V4L2_CID_LINK_FREQ.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add RAW8, RAW10 and RAW12 formats.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add RAW10 and RAW12 formats. We only need to add the entries to the
rcar_csi2_format list.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the Y8 entry before Y10, so that the entries are in a bit more
logical order.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It's no longer practical for the OMAP IOMMU driver to trick
arm_setup_iommu_dma_ops() into ignoring its presence, so let's use the
same tactic as other IOMMU API users on 32-bit ARM and explicitly kick
the arch code's dma_iommu_mapping out of the way to avoid problems.
Fixes: 4720287c7b ("iommu: Remove struct iommu_ops *iommu from arch_setup_dma_ops()")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
sfr->buf_size is in shared memory and can be modified by malicious user.
OOB write is possible when the size is made higher than actual sfr data
buffer. Cap the size to allocated size for such cases.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
qsize represents size of shared queued between driver and video
firmware. Firmware can modify this value to an invalid large value. In
such situation, empty_space will be bigger than the space actually
available. Since new_wr_idx is not checked, so the following code will
result in an OOB write.
...
qsize = qhdr->q_size
if (wr_idx >= rd_idx)
empty_space = qsize - (wr_idx - rd_idx)
....
if (new_wr_idx < qsize) {
memcpy(wr_ptr, packet, dwords << 2) --> OOB write
Add check to ensure qsize is within the allocated size while
reading and writing packets into the queue.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
words_count denotes the number of words in total payload, while data
points to payload of various property within it. When words_count
reaches last word, data can access memory beyond the total payload. This
can lead to OOB access. With this patch, the utility api for handling
individual properties now returns the size of data consumed. Accordingly
remaining bytes are calculated before parsing the payload, thereby
eliminates the OOB access possibilities.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a possibility that init_codecs is invoked multiple times during
manipulated payload from video firmware. In such case, if codecs_count
can get incremented to value more than MAX_CODEC_NUM, there can be OOB
access. Reset the count so that it always starts from beginning.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When we obtain a reference to of a platform_device, we need to release
it via put_device.
Found by cocci:
./platform/nuvoton/npcm-video.c:1677:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1684:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1690:3-9: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
./platform/nuvoton/npcm-video.c:1694:1-7: ERROR: missing put_device; call of_find_device_by_node on line 1667, but without a corresponding object release within this function.
Instead of manually calling put_device, use the __free macros.
Cc: stable@vger.kernel.org
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make sure all the code paths call of_node_put().
Instead of manually calling of_node_put, use the __free macros/helpers.
Cc: stable@vger.kernel.org
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In allegro_probe(), the v4l2 device is not unregistered in the error
path, which results in a memory leak. Fix it by calling
v4l2_device_unregister() before returning error.
Fixes: d74d4e2359 ("media: allegro: move driver out of staging")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Change headres_size to headers_size.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The HEVC driver needs to set the start_bit field explicitly to avoid
causing corrupted frames when the VP9 decoder is used in parallel. The
reason for this problem is that the VP9 and the HEVC decoder share this
register.
Fixes: cb5dd5a0fa ("media: hantro: Introduce G2/HEVC decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When the system goes into sleep mode, the dependent
power will be turned off, so when the system resumes,
coda_hw_init() needs to be called, otherwise it will
get 'CODA PIC_RUN timeout' after resuming.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On Mediatek devices with a system companion processor (SCP) the mtk_scp
structure has to be removed explicitly to avoid a resource leak.
Free the structure in case the allocation of the firmware structure fails
during the firmware initialization.
Fixes: 53dbe08504 ("media: mtk-vcodec: potential null pointer deference in SCP")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Build-testing on x86 showed two modules with conflicting "iris.ko"
names after the addition of the qualcomm driver:
error: the following would cause module name conflict:
arch/x86/platform/iris/iris.ko
drivers/media/platform/qcom/iris/iris.ko
Since this a new module, nothing should rely on the name yet, so
rename this one to a more specific "qcom-iris.ko".
Fixes: 38506cb7e8 ("media: iris: add platform driver for iris video device")
Cc: Shérab <Sebastien.Hinderer@ens-lyon.org> # for x86 iris
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This is one of three clang warnings about incompatible enum types
in a conditional expression:
drivers/media/platform/mediatek/vcodec/encoder/venc/venc_h264_if.c:597:29: error: conditional expression between different enumeration types ('enum scp_ipi_id' and 'enum ipi_id') [-Werror,-Wenum-compare-conditional]
597 | inst->vpu_inst.id = is_ext ? SCP_IPI_VENC_H264 : IPI_VENC_H264;
| ^ ~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~
The code is correct, so just rework it to avoid the warning.
Fixes: 0dc4b32861 ("media: mtk-vcodec: venc: support SCP firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@google.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/c725ad8d0ecac3cf6bbc532af567e56d47a6b75c.1738746904.git.namcao@linutronix.de
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove redefined image data type IDs taken directly from the MIPI CSI-2
specification. Non-functional change.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Call v4l2_get_link_freq() on a pad, instead of a control handler. This way
we can soon convert v4l2_get_link_freq() to be callable only on a pad and
remove the compatibility code.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com> # rp1-cfe
Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> # st-mipid02
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce two variable has_csi and has_mclk within the
match data of the driver in order to know, depending on
the compatible if CSI-2 interface is available and if
the mclk clk should be retrieved.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Correct several missing unsigned type missing for loop variables
and also remove useless initialization of variables.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The endpoint is already retrieved at the beginning of the function
stm32_csi_parse_dt hence keep the endpoint pointer until the end
instead of getting a new one.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Put all error handling for VC stop and CSI stop together
to avoid duplication of code.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Within stm32_csi_start, use ARRAY_SIZE loop in order to search
for the right setting.
Avoid useless init of lanes_ie / lanes_en.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Call v4l2_async_register_subdev only whenever all initialization
are completed at the end of the probe function.
Remove as well useless err_free_priv label by returning directly
upon error.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Within the stm32_csi_start function, pm_runtime_put should
be called upon error following pm_runtime_get_sync.
Rework the function error handling by putting a label in
order to have common error handling for all calls requiring
pm_runtime_put.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The ret variable used within the function dcmipp_graph_notify_bound is
wrongly defined as unsigned int while it can also be signed.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Wave5 521C variant does not support 10 bit decoding. When 10 bit
decoding support was added for the 515 variant, a section of the code
was removed which returned an error. This removal causes a timeout for
the 521 variant, which was discovered during HEVC 10-bit decoding tests.
Fixes: 143e7ab4d9 ("media: chips-media: wave5: support decoding HEVC Main10 profile")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
While seeking, the driver calls the flush command. Before the flush
command is sent to the VPU, the driver should handle the display buffer
flags and should get all decoded information from the VPU if the VCORE
is running.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In case of multiple active instances, new interrupts can occur as soon
as the current interrupt is cleared. If the driver reads the
instance_info after clearing the interrupt, then there is no guarantee,
that the instance_info is still valid for the current interrupt.
Read the instance_info register for each interrupt before clearing the
interrupt.
Fixes: ed7276ed2f ("media: chips-media: wave5: Add hrtimer based polling support")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When a decoder instance is created, the W5_CMD_ERR_CONCEAL register
should be initialized to 0. Otherwise, gray color is occasionally
displayed on the screen while decoding.
Fixes: 45d1a2b932 ("media: chips-media: wave5: Add vpuapi layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson.lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The camera subsystem for the SDM670 the same as on SDM845 except with
3 CSIPHY ports instead of 4. Add support for the SDM670 camera
subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Initialize the platform data and enable video driver probe of SM8250
SoC.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Based on the design of the state machine, add checks whether the
transition from one sub-state to another is allowed.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement power scaling including a specific vpu2 and vpu3 calculation
for clock and bus bandwidth, which depends on the hardware
configuration, codec format, resolution and frame rate.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Based on the hardware capabilities, add a check during start_streaming
and queue_setup, whether the video session is supported by the hardware.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
handle the V4L2_DEC_CMD_STOP by initiating a drain sequence on the
firmware. Process and decode all OUTPUT buffers, that are queued by the
client, before the VIDIOC_DECODER_CMD() was issued and mark the last
buffer with the V4L2_BUF_FLAG_LAST flag. The decoder is stopped, after
processing the last buffer.
Resume the decoder when one of these operations are issued by the client:
- V4L2_DEC_CMD_START
- pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE queue
- pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the OUTPUT queue
Add the handling to resume decoding when client issues
V4L2_DEC_CMD_START to resume decoding after a source change is detected.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The decoder is stopped after it completes the dynamic resolution change
sequence. Handle VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE
queue to resume the decoding process.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Handle the response sent by the firmware, when a source change is
detected. Read the subscribed parameter to get the changed values. Raise
the source change event to the client and update the instance sub-state.
Mark the last buffer from before the source change with the
V4L2_BUF_FLAG_LAST flag and return to the client.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the vb2 ops for the buf queue. These are the different buffer
attributes:
BUF_ATTR_DEFERRED - buffer queued by the client but not submitted to
firmware.
BUF_ATTR_PENDING_RELEASE - buffers requested to be released from
the firmware.
BUF_ATTR_QUEUED - buffers submitted to the firmware.
BUF_ATTR_DEQUEUED - buffers received from the firmware.
BUF_ATTR_BUFFER_DONE - buffers sent back to vb2.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the functions for creating, queueing, releasing and destroying
the buffers for internal usage.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For hfi_gen2, subscribe different bitstream parameters on to firmware,
to get notified of a change in any of the subscribed parameters.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
During the stream on operation, set some mandatory properties on the
firmware to start a session. Set all v4l2 properties, which are set by
the client, on to firmware, which is prepared with the dependency graph.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
During the stream on operation, send HFI_CMD_START on the capture and
output planes to start processing on the respective planes.
During the stream off operation, send HFI_CMD_STOP to the firmware,
which is a synchronous command. After the response is received by the
firmware, the session is closed on the firmware.
Introduce different states for the instance and state transitions.
IRIS_INST_INIT - video instance is opened.
IRIS_INST_INPUT_STREAMING - stream on is completed on output plane.
IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane.
IRIS_INST_STREAMING - stream on is completed on both output and capture
planes.
IRIS_INST_DEINIT - video instance is closed.
IRIS_INST_ERROR - error state.
|
v
-------------
+---------| INIT |--------- +
| ------------- |
| ^ ^ |
| / \ |
| / \ |
| v v |
| ----------- ----------- |
| | INPUT OUTPUT | |
|---| STREAMING STREAMING |---|
| ----------- ----------- |
| ^ ^ |
| \ / |
| \ / |
| v v |
| ------------- |
|--------| STREAMING |-----------|
| ------------- |
| | |
| | |
| v |
| ----------- |
+-------->| DEINIT |<----------+
| ----------- |
| | |
| | |
| v |
| ---------- |
+-------->| ERROR |<-----------+
----------.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the query_cap ioctl with the necessary hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Initialize the control handler by reading the platform specific firmware
capabilities. Capabilities are features, which are supported by a
specific platform (SOC). Each capability is defined with a min, max,
range and default value and a corresponding HFI. Implement s_ctrl and
g_volatile_ctrl ctrl ops.
Co-developed-by: Vedang Nagar <quic_vnagar@quicinc.com>
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the subscribe_event and unsubscribe_event iocts with the
necessary hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the enum_fmt and enum_framesizes ioctls with the necessary
hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the g_selection ioctl op in the driver with the necessary
hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the s_fmt, g_fmt and try_fmt ioctl ops with the necessary
hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the
driver with necessary hooks.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement runtime power management for iris, including a platform
specific power on/off sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Host firmware interface (HFI) is a well defined set of interfaces
for the communication between the host driver and the firmware. The
commands and responses are exchanged in form of packets. One or multiple
packets are grouped under the packet header. Each packet has a packet
type which describes the specific HFI and the payload, which holds the
corresponding value for that HFI.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Set the memory region on the firmware and implement the boot sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Load/unload the firmware into/from memory via the MDT loader.
The firmware is loaded as part of core initialization and unloaded as
part of core de-initialization.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce a core state management for iris driver with the necessary
queues needed for the host firmware communication.
There are 3 types of queues:
Command queue - driver to write any command to firmware.
Message queue - firmware to send any response to the driver.
Debug queue - for the firmware to write debug messages.
Initialize and configure the shared queues during probe.
Different states for core:
IRIS_CORE_DEINIT - default state.
IRIS_CORE_INIT - core state with core initialized. FW loaded and HW
brought out of reset, shared queues established
between host driver and firmware.
IRIS_CORE_ERROR - error state.
-----------
|
V
-----------
| DEINIT |
-----------
^
/ \
/ \
/ \
/ \
v v
----------- ----------.
| INIT |-->| ERROR |
----------- ----------.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement open, close and poll ops.
Open:
Configure the vb2 queue and v4l2 file handler. Allocate a video instance
and add the instance to core instance list.
Close:
Free the instance and remove it from core instance list.
Poll:
Wait for an event on vb2 src and vb2 dst queues.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation for adding H264 decode functionality, add the probe and
remove functions and platform data to initialize iris resources, which
are clocks, interconnects, power domains, reset clocks, and clock
frequencies used for the iris hardware.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CSID in sm8550 is version 780, it has new register offset
and new functionality. The buf done irq, register update and
reset are moved to CSID 780.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a PHY configuration sequence and PHY resource for the sm8550 which
uses a Qualcomm Gen 2 version 2.1.2 CSI-2 PHY.
The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add CAMSS_8550 enum, sm8550 compatible and sm8550 camss drvier private
data, the private data just include some basic information now, later
changes will enumerate with csiphy, csid and vfe resources.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver
shouldn't be registered. Checking the supported TPG modes to indicate
if the TPG hardware exists or not and only registering v4l2 ctrl for
CSID only when the TPG hardware is present.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a default case in vfe_src_pad_code to get rid of a compile
warning if a new hw enum is added.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RUP registers and buf done irq are moved from the IFE to CSID register
block on recent CAMSS implementations. Add callbacks structure to wrapper
the location change with minimum logic disruption.
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some v4l2 buffer related logic functions can be moved to vfe core as
common code, then the vfe driver of different hw version can reuse them,
this also can avoid adding duplicate code for new version supporting.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The get hw version and src pad code functions can be common code in csid
core file, then the csid driver of different hw version can reuse them,
rather than adding duplicate code in csid driver for each version.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
New versions of the CSIPHY locate the control registers at offset 0x1000
not offset 0x800.
Provide a variable to base an offset from for the purposes of redirecting
the base offset for the new PHY regs layout.
The existing setup bases from 0x800, the new from 0x1000 with some of the
'EXT' registers dropped but the lower-order lane config regs at offset 0x00
and up the same as before.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A .data field in the csiphy device structure allows us to extend out the
register layout of the three phase capable CSIPHY layer.
Move the existing lane configuration structure to an encapsulating
structure -> struct csiphy_device_regs which is derived from the .data
field populated at PHY init time, as opposed to calculated at lane
configuration.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a nop init callback to CSIPHY devices, this callback is used to add
some HW register offset and register configuration for specific platform,
then different platform can reuse the same CSIPHY driver. Later changes
will enumerate with enabling code.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The existing structure captures the configuration of CSIPHY lane registers.
Rename to struct csiphy_lane_regs to reflect.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Adding a new CSIPHY init sequence using downstream as a reference prompted
me to look at why we are splitting up the init sequence into chunks.
Right now we declare CSI PHY init sequences as an array of five equally
sized writes with a hard-coded control loop to iterate through each of the
five indexes. One bug in this model is that if you don't have an even
number of writes, you can't init the PHY as you wish.
In downstream the original code has something of the character
phy_init_seq[MAX_LANES][MAX_PARAMS] which in upstream we have translated
into phy_init_seq[5][SOME_NUMBER_OF_EQUAL_WRITES];
What the code does is take a pointer to the first index of the
r = &phy_init_seq[0][0]; and then literally does write(r, value); r++;
The controlling loop that hard-codes '5' in-lieu of MAX_LANES does no
special sleep, fabric-coherence sync or even a printk() to justify its
existence. Our compilers are optimising all of this away anyway so lets
drop.
Reduce the array declaration down to one flat aggregate init and let the
code just step through. As a happy side-effect we can then also handle
odd-number writes as the number of elements in the init sequence will no
longer have to be evenly divisible.
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update clock names to make them consistent with existing platform i.e
sc8280xp. Rename gcc_cam_hf_axi to gcc_axi_hf and add gcc_axi_sf.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=ktuX
-----END PGP SIGNATURE-----
Merge tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Sensor driver fixes
- remove dead TI wl128x FM radio driver
- Add support for the imx462 sensor at the IMX290 binding
- V4L2 pixel data transmitter and receiver documentation improvements
- Add support for MIPI Discovery and Configuration for C-PHY line
orders
- imx8-isi fixes and improvements
- stm32: dcmipp: add core support for the stm32mp25
- qcom: camss: Add sc7280 support
- Various fixes and enhancements
* tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits)
media: nuvoton: Fix an error check in npcm_video_ece_init()
media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer
media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
media: fix secfeed undefined when filter alloc fail
media: dt-bindings: trivial white-space and example cleanup
MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI
media: solo6x10: Use const 'struct bin_attribute' callback
media: saa7164: Remove unused values
staging: media: imx: fix OF node leak in imx_media_add_of_subdevs()
media: platform: exynos4-is: Remove unused __is_get_frame_size
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
media: mmp: Bring back registration of the device
media: cec: include linux/debugfs.h and linux/seq_file.h where needed
Revert "media: qcom: camss: Restructure camss_link_entities"
media: venus: Remove unused hfi_core_ping()
media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable
media: venus: Populate video encoder/decoder nodename entries
media: venus: Add support for static video encoder/decoder declarations
media: venus: match instance creation and destruction order
media: venus: destroy hfi session after m2m_ctx release
...
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV.
Fixes: 46c15a4ff1 ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241015014053.669-1-thunder.leizhen@huawei.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The last use of __is_get_frame_size() was removed in 2013 by
commit 5cfaad64d8 ("[media] exynos4-is: Fix format propagation on
FIMC-IS-ISP subdev")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In commit 4af65141e3 ("media: marvell: cafe: Register V4L2 device
earlier"), a call to v4l2_device_register() was moved away from
mccic_register() into its caller, marvell/cafe's cafe_pci_probe().
This is not the only caller though -- there's also marvell/mmp.
Add v4l2_device_register() into mmpcam_probe() to unbreak the MMP camera
driver, in a fashion analogous to what's been done to the Cafe driver.
Same for the teardown path.
Fixes: 4af65141e3 ("media: marvell: cafe: Register V4L2 device earlier")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This reverts commit cc1ecabe67.
This commit has a basic flaw in that it relies on camss->res->csid_num as a
control to index the array camss->vfe[i].
Testing on a platform where csid_num > vfe_num showed this bug up.
camss->vfe should only be indexed by camss->res->vfe_num. Since this commit
is meant to make the code be more readable reverting will simply restore
the previous correct bounds checking.
We can make another pass at making camss_link_entities look prettier but,
for now we should zap the bug introduced.
Fixes: cc1ecabe67 ("media: qcom: camss: Restructure camss_link_entities")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
hfi_core_ping() was added by 2017's
commit 09c2845e8f ("[media] media: venus: hfi: add Host Firmware
Interface (HFI)")
but has remained unused.
Remove it.
It was the only caller of the ->core_ping member of hfi_ops,
so remove it, and the venus_core_ping that it pointed to.
Note I've left pky_sys_ping which seems to be the lowest level
definition of the command.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Populate encoder and decoder node-name entries for the upstream parts. Once
done the compat="video-encoder" and compat="video-decoder" in the dtsi can
be dropped though the venus driver will continue to favour DT declared
video-encoder/video-decoder declarations over static declarations for
compatibility.
Tested-by: Renjiang Han <quic_renjiang@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add resource structure data and probe() logic to support static
declarations of encoder and decoder.
Right now we rely on video encoder/decoder selection happening in the dtb
but, this goes against the remit of device tree which is supposed to
describe hardware, not select functional logic in Linux drivers.
Provide two strings in the venus resource structure enc_nodename and
dec_nodename.
When set the venus driver will create an OF entry in-memory consistent
with:
dec_nodename {
compat = "video-decoder";
};
and/or
enc_nodename {
compat = "video-encoder";
};
This will allow us to reuse the existing driver scheme of relying on compat
names maintaining compatibility with old dtb files.
dec_nodename can be "video-decoder" or "video0"
enc_nodename can be "video-encoder" or "video1"
This change relies on of_changeset() API as a result select OF_DYNAMIC will
be added to venus/Kconfig
Tested-by: Renjiang Han <quic_renjiang@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Match order of instances' initialization in venc_open()/vdec_close()
and order of destruction in venus_common_close().
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This partially reverts commit that made hfi_session_destroy()
the first step of vdec/venc close(). The reason being is a
regression report when, supposedly, encode/decoder is closed
with still active streaming (no ->stop_streaming() call before
close()) and pending pkts, so isr_thread cannot find instance
and fails to process those pending pkts. This was the idea
behind the original patch - make it impossible to use instance
under destruction, because this is racy, but apparently there
are uses cases that depend on that unsafe pattern. Return to
the old (unsafe) behaviour for the time being (until a better
fix is found).
Fixes: 45b1a1b348 ("media: venus: sync with threaded IRQ during inst destruction")
Cc: stable@vger.kernel.org
Reported-by: Nathan Hebert <nhebert@google.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Running the v4l2-compliance (1.27.0-5208, SHA: af114250d48d) on the m2m
device fails on the MMAP streaming tests, with the following messages:
fail: v4l2-test-buffers.cpp(240): g_field() == V4L2_FIELD_ANY
fail: v4l2-test-buffers.cpp(1508): buf.qbuf(node)
Apparently, the driver does not properly set the field member of
vb2_v4l2_buffer struct, returning the default V4L2_FIELD_ANY value which
is against the guidelines.
Fixes: cf21f328fc ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240924103304.124085-1-laurentiu.palcu@oss.nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add check for the return value of clk_enable() to gurantee the success.
Fixes: babde1c243 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add check for the return value of clk_enable() to gurantee the success.
Fixes: b5f1220d58 ("[media] v4l: Add v4l2 subdev driver for S5P/EXYNOS4 MIPI-CSI receivers")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Unicam hardware has been observed to cause a buffer overrun when
using the dummy buffer as a circular buffer. The conditions that cause
the overrun are not fully known, but it seems to occur when the memory
bus is heavily loaded.
To avoid the overrun, program the hardware with a buffer size of 0 when
using the dummy buffer. This will cause overrun into the allocated dummy
buffer, but avoid out of bounds writes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The imx219/imx708 sensors frequently generate a single corrupt frame
(image or embedded data) when the sensor first starts. This can either
be a missing line, or invalid samples within the line. This only occurrs
using the upstream Unicam kernel driver.
Disabling trigger mode elimiates this corruption. Since trigger mode is
a legacy feature copied from the firmware driver and not expected to be
needed, remove it. Tested on the Raspberry Pi cameras and shows no ill
effects.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When matching formats via try_fmt/set_fmt ioctls, test for the unpacked
formats as well as packed formats. This allows userland clients setup
unpacking to 16-bits from the 10/12/14-packed CSI2 formats.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ensure that the frame sequence counter is incremented only if a previous
frame start interrupt has occurred, or a frame start + frame end has
occurred simultaneously.
This corresponds the sequence number with the actual number of frames
produced by the sensor, not the number of frame buffers dequeued back
to userland.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The latest datasheet (Rev.0.70) updates the D-PHY start-up sequence for
D-PHY operation. Unfortunately the datasheet do not add any additional
documentation on the magic values.
This have been tested together with the MAX96724 available on the single
board test platform and it works as expected.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Later versions of the V4H datasheet adds documentation for the line
order register needed to support all possible configurations. Extend the
driver to take the line order for each data line into account when
configuring the device.
Unfortunately not all registers initially thought to be involved in line
order configuration where directly related. One magic value is still in
the driver and left as-is, but it is not related to line order as that
procedure have now been documented.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add check for the return value of clk_enable() to guarantee the success.
Fixes: 81a409bfd5 ("media: marvell-ccic: provide a clock for the sensor")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
[Sakari Ailus: Fix spelling in commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The company name has update to Rockchip Electronics Co., Ltd.
since 2021.
And change Co.Ltd to Co., Ltd. to fix mail server warning:
DBL_SPAM(6.50)[co.ltd:url];
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241216100444.3726048-1-andyshrk@163.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Store the chroma and motion vector offsets for each frame so that they
can be used later when the resolution changes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Hantro decoder non post-processed pixel-format steps are different
from the post-processed ones. Fix the steps according to the hardware
limitations. Since reference frame pixel-format issues have been fixed,
it is possible to use V4L2_PIX_FMT_NV15_4L4 rather V4L2_PIX_FMT_P010_4L4
for 10bit streams.
Fluster VP9 score goes up to 207/305.
HEVC score is still 141/147.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Hantro decoder always produces tiled pixel-formats, but when the
post-processor is used, the destination pixel-format is a non-tiled
pixel-format. This causes an incorrect computation of the reference
frame size and offsets. Get and save the correct tiled pixel-format for
8 and 10 bit streams to solve these computation issues.
Fluster VP9 score increase to 166/305 (vs 145/305).
HEVC score is still 141/147.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the cmdq_pkt_create() and cmdq_pkt_destroy() common functions
instead of implementing specific mdp3 versions.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to have fine-grained control, use cmdq_pkt_eoc() and
cmdq_pkt_jump_rel() to replace cmdq_pkt_finalize().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Just like was done with MM_REG_WRITE, remove the mask from the
MM_REG_POLL macro, leaving MM_REG_POLL_MASK to be used when a mask is
required, and update the call sites accordingly. In this case, all calls
require a mask, so MM_REG_POLL remains unused, but at least this makes
the MM_REG_POLL macros consistent with the MM_REG_WRITE ones.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two macros to issue a cmdq write: MM_REG_WRITE_MASK and
MM_REG_WRITE, but confusingly, both of them take a mask parameter. The
difference is that MM_REG_WRITE additionally checks whether the mask
passed in contains the register mask, in which case, the 0xffffffff mask
is passed to cmdq_pkt_write_mask(), effectively disregarding the mask
and calling cmdq_pkt_write() as an optimization.
Move that optimization to the MM_REG_WRITE_MASK macro and make
MM_REG_WRITE the variant that doesn't take a mask, directly calling to
cmdq_pkt_write().
Change the call sites to MM_REG_WRITE whenever a mask wasn't necessary
(ie 0xffffffff or a <register>_MASK was passed as mask) and in other
cases to MM_REG_WRITE_MASK.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A few macros declare variadic arguments even though the underlying
functions don't support them. Remove them.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
cmdq_pkt_write_mask() boils down to a cmdq_pkt_write() when the mask is
0xFFFFFFFF. Call cmdq_pkt_write() directly in those cases to simplify
the code.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The stm32mp25 supports both parallel & csi inputs.
An additional clock control is necessary.
Skeleton of the subdev structures for the stm32mp25 is added,
identical for the time being to the stm32mp13 however more subdeves
will be added in further commits.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add hw_revision field information of the media controller so that
application can distinguish between variants of DCMIPP implementations.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Avoid duplication of enumerated pixelformat on the bytecap
video capture device. Indeed, since the bytecap format list
contains both CSI & parallel 16bits formats, ensure that same
pixelformat are not reported twice when performing enumeration
of supported formats.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add 1X16 RGB & YUV formats support within bytecap & byteproc.
Slightly change the link_validate function to be able to validate
against either 1X16 or 2X8 variant of a format.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for bayer formats from 10 to 14 bits.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On stm32mp25, the dcmipp can accept data coming from a CSI bus in
addition to the parallel interface. Add this support into
dcmipp-input subdev.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation of the introduction of dcmipp csi input support, rename
the dcmipp_parallel subdev into a generic dcmipp_input which will be in
charge of handling both parallel input & csi input.
Only structures / variables / functions and file naming are changed without
any functional modifications.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace s_stream ops with enable_streams and disable_streams.
At the same time, use v4l2_subdev_enable_streams and
v4l2_subdev_disable_streams functions instead of
direct s_stream calls.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Rely on v4l2_subdev_is_streaming in order to know if the subdev
is streaming or not instead of relying on a local variable.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The STM32 CSI controller is tightly coupled with the DCMIPP and act as an
input stage to receive data coming from the sensor and transferring
them into the DCMIPP.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Correct the call to dma_set_mask_and_coherent which should be set
to DMA_BIT_MASK(32).
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There apparently is no reason to require 3 queued buffers to call
streamon() for the RkISP1 as the driver operates with a scratch buffer
where frames can be directed to if there's no available buffer provided
by userspace.
Reduce the number of required buffers to 1 to allow applications to
operate with a single queued buffer.
Tested with libcamera, by operating with a single capture request. The
same request (and associated capture buffer) gets recycled once
completed. This of course causes a frame rate drop but doesn't hinder
operations.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241007124225.63463-1-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This commit fixes an unused value issue detected by Coverity (CID
1519008). The error condition for the invalid MIPI CSI-2 is not properly
handled as the break statement would only exit the switch block and not
the entire loop. Fix this by breaking from the look immediately after
the switch block when an error occurs.
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Fixes: 7d4f126fde ("media: rkisp1: Make the internal CSI-2 receiver optional")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://lore.kernel.org/r/20241119072653.72260-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Refactor the camss_link_entities function by breaking it down into
three distinct functions. Each function will handle the linking of
a specific entity separately.
SC7280 and later targets mandates for 1:1 linking for csid -> vfe.
i.e. csid0 can be mapped to vfe0 only.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introducing a new function camss_link_err to avoid repition of
same error message, improving code maintainability.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A mfc_debug_enter() is not balanced by a corresponding mfc_debug_leave().
Add the missing call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
fimc_is_param_strerr() was added in 2013 by
commit 9a761e4368 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
but has never been called.
Remove it.
(The other possibility might be to add a call maybe in fimc-is-param ?)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35 ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The platform compatibility checks for MT8183 and
MT8195 in mdp_cmdq_prepare() are redundant as they are
done in __get_config_offset() itself. Furthermore
there are two if-else branch in __get_config_offset()
which have similar conditions and are redundant.
To address this, remove the check in mdp_cmdq_prepare()
and combine the two if-else branch into one in
__get_config_offset().
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=25BS
-----END PGP SIGNATURE-----
Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- removal of the old omap4iss media driver
- mantis: remove orphan mantis_core.h
- add support for Raspberypi CFE
- uvc driver got a co-maintainer
- main media tree moved to git://linuxtv.org/media.git
- lots of driver cleanups, updates and fixes
* tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits)
docs: media: update location of the media patches
MAINTAINERS: update location of media main tree
media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer
media: platform: samsung: s5p-jpeg: Remove deadcode
media: qcom: camss: Add MSM8953 resources
media: dt-bindings: Add qcom,msm8953-camss
media: qcom: camss: implement pm domain ops for VFE v4.1
media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available
media: adv7180: Also check for "adi,force-bt656-4"
media: dt-bindings: adv7180: Document 'adi,force-bt656-4'
media: mgb4: Fix inconsistent input/output alignment in loopback mode
media: replace obsolete hans.verkuil@cisco.com alias
Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc
media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls
media: atomisp: Add check for rgby_data memory allocation failure
media: atomisp: remove redundant re-checking of err
media: atomisp: Fix spelling errors reported by codespell
media: atomisp: Remove License information boilerplate
media: atomisp: Fix typos in comment
media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h
...
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to *_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()
-----BEGIN PGP SIGNATURE-----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=SpyF
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcxMXceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1IgH/A3O7KIy/VR7D7O3
usbLqk1V+YWs/NsVdewEL/SYfXjCxqnejdk/AvN3ZAIxFeMHhAmcSCKno3zKgK9L
ML4kDrz22dPlA0XncNM8qKTCqAMgXTur1wafv3NAjutg0D3eHvAp0BW0GO5px93G
+kt3kOY32UaB+2Fl1GIub777pRi5U4u5AboQTu3x0TdRZJtV1pqgeddGoymNn6mi
xmMVbY3r5MXJQyHntoT9FIuxK3d+jGcgRHP5RWr53+vAUEFdlXiGcJV4dUXsuQNa
sEKJutCaUqQeiamjoo4bRZO7/2OAPX9Sv7sNIXD/irZZJmCcWr+GDCcUmL69Mjg7
7mx6XrM=
=HYUx
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
-----BEGIN PGP SIGNATURE-----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=SGfF
-----END PGP SIGNATURE-----
Merge tag 'media/v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- dvb-core fixes for vb2 check and device registration
- v4l2-core: fix an issue with error handling for VIDIOC_G_CTRL
- vb2 core: fix an issue with vb plane copy logic
- videobuf2-core: copy vb planes unconditionally
- vivid: fix buffer overwrite when using > 32 buffers
- vivid: fix a potential division by zero due to an issue at v4l2-tpg
- some spectre vulnerability fixes
- several OOM access fixes
- some buffer overflow fixes
* tag 'media/v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2-core: copy vb planes unconditionally
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
media: vivid: fix buffer overwrite when using > 32 buffers
media: pulse8-cec: fix data timestamp at pulse8_setup()
media: cec: extron-da-hd-4k-plus: don't use -1 as an error code
media: stb0899_algo: initialize cfr before using it
media: adv7604: prevent underflow condition when reporting colorspace
media: cx24116: prevent overflows on SNR calculus
media: ar0521: don't overflow when checking PLL values
media: s5p-jpeg: prevent buffer overflows
media: av7110: fix a spectre vulnerability
media: mgb4: protect driver against spectre
media: dvb_frontend: don't play tricks with underflow values
media: dvbdev: prevent the risk of out of memory access
media: v4l2-tpg: prevent the risk of a division by zero
media: v4l2-ctrls-api: fix error handling for v4l2_g_ctrl()
media: dvb-core: add missing buffer index check
exynos3250_jpeg_operating() has been unused since it was added in 2014's
commit 3246fdaa0a ("[media] s5p-jpeg: Add support for Exynos3250 SoC")
exynos4_jpeg_get_fifo_status(), exynos4_jpeg_get_frame_size(), and
exynos4_jpeg_set_timer_count() have been unused since they were added by
commit 80529ae5c1 ("[media] s5p-jpeg: JPEG codec")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This commit describes the hardware layout for the MSM8953
for the following hardware blocks:
- 2 x VFE, 3 RDI per VFE
- 3 x CSID
- 3 x CSI PHY
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
MSM8917 and MSM8953 have multiple VFE power-domains they
have to be powered on/off explicitly.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In fimc_md_is_isp_available(), of_get_child_by_name() is called to check
if FIMC-IS is available. Current code does not decrement the refcount of
the returned device node, which causes an OF node reference leak. Fix it
by calling of_node_put() at the end of the variable scope.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: e781bbe3fe ("[media] exynos4-is: Add fimc-is subdevs registration")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: added CC to stable]
Factor out common instance destruction code into
a common function.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When destroying an inst we should make sure that we don't race
against threaded IRQ (or pending IRQ), otherwise we can concurrently
kfree() inst context and inst itself.
BUG: KASAN: slab-use-after-free in vb2_queue_error+0x80/0x90
Call trace:
dump_backtrace+0x1c4/0x1f8
show_stack+0x38/0x60
dump_stack_lvl+0x168/0x1f0
print_report+0x170/0x4c8
kasan_report+0x94/0xd0
__asan_report_load2_noabort+0x20/0x30
vb2_queue_error+0x80/0x90
venus_helper_vb2_queue_error+0x54/0x78
venc_event_notify+0xec/0x158
hfi_event_notify+0x878/0xd20
hfi_process_msg_packet+0x27c/0x4e0
venus_isr_thread+0x258/0x6e8
hfi_isr_thread+0x70/0x90
venus_isr_thread+0x34/0x50
irq_thread_fn+0x88/0x130
irq_thread+0x160/0x2c0
kthread+0x294/0x328
ret_from_fork+0x10/0x20
Allocated by task 20291:
kasan_set_track+0x4c/0x80
kasan_save_alloc_info+0x28/0x38
__kasan_kmalloc+0x84/0xa0
kmalloc_trace+0x7c/0x98
v4l2_m2m_ctx_init+0x74/0x280
venc_open+0x444/0x6d0
v4l2_open+0x19c/0x2a0
chrdev_open+0x374/0x3f0
do_dentry_open+0x710/0x10a8
vfs_open+0x88/0xa8
path_openat+0x1e6c/0x2700
do_filp_open+0x1a4/0x2e0
do_sys_openat2+0xe8/0x508
do_sys_open+0x15c/0x1a0
__arm64_sys_openat+0xa8/0xc8
invoke_syscall+0xdc/0x270
el0_svc_common+0x1ec/0x250
do_el0_svc+0x54/0x70
el0_svc+0x50/0xe8
el0t_64_sync_handler+0x48/0x120
el0t_64_sync+0x1a8/0x1b0
Freed by task 20291:
kasan_set_track+0x4c/0x80
kasan_save_free_info+0x3c/0x60
____kasan_slab_free+0x124/0x1a0
__kasan_slab_free+0x18/0x28
__kmem_cache_free+0x134/0x300
kfree+0xc8/0x1a8
v4l2_m2m_ctx_release+0x44/0x60
venc_close+0x78/0x130 [venus_enc]
v4l2_release+0x20c/0x2f8
__fput+0x328/0x7f0
____fput+0x2c/0x48
task_work_run+0x1e0/0x280
get_signal+0xfb8/0x1190
do_notify_resume+0x34c/0x16a8
el0_svc+0x9c/0xe8
el0t_64_sync_handler+0x48/0x120
el0t_64_sync+0x1a8/0x1b0
Rearrange inst destruction. First remove the inst from the
core->instances list, second synchronize IRQ/IRQ-thread to
make sure that nothing else would see the inst while we take
it down.
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
We destroy mutex-es too early as they are still taken in
v4l2_fh_exit()->v4l2_event_unsubscribe()->v4l2_ctrl_find().
We should destroy mutex-es right before kfree(). Also
do not vdec_ctrl_deinit() before v4l2_fh_exit().
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Suggested-by: Tomasz Figa <tfiga@google.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
HFI supports hierarchical P encoding and the ability to specify the
bitrate for the different layers.
Connect the controls that V4L2 provides and HFI supports.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the dynamic bitrate updating functionality to a separate function
so that it can be shared.
No functionality changes.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When using buffers from DRM, DMA-API gives a warning about: "mapping sg
segment longer than device claims to support [len=307200] [max=65536]"
Add a call to vb2_dma_contig_set_max_seg_size() to tell the DMA-API
about the supported segment size (which is UINT_MAX).
Fixes: 6edb685abb ("media: raspberrypi: Add support for RP1-CFE")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org
Fixes: b50a64fc54 ("media: amphion: add amphion vpu device driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If devm_clk_get() fails then we need to free "cfe" before returning.
Fixes: 6edb685abb ("media: raspberrypi: Add support for RP1-CFE")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
platform_get_irq() already provides a error message.
This fixes the following cocci error:
drivers/media/platform/raspberrypi/rp1-cfe/cfe.c:2326:2-9: line 2326 is redundant because platform_get_irq() already prints an error
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a spelling mistake in a WARN message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/87a5eub5s8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a 'yuv' flag to the `rzg2l_cru_ip_format` structure to indicate
whether a given format is YUV-based and update the `rzg2l_cru_ip_formats`
array with this flag appropriately. This change enables a more efficient
way to check if the input and output formats use the same colorspace.
With this change, we can eliminate the use of `v4l2_format_info()` in
`rzg2l_cru_initialize_image_conv()` as the necessary details for the source
and destination formats are already available through the `yuv` flag.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-24-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the RZ/G2L CRU register definitions from `rzg2l-video.c` to a
dedicated header file, `rzg2l-cru-regs.h`. Separating these definitions
into their own file improves the readability of the code.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-23-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor the ICnDMR register configuration in
`rzg2l_cru_initialize_image_conv()` by adding a new member `icndmr` in the
`rzg2l_cru_ip_format` structure.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-21-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make use of `rzg2l_csi2_formats` array in rzg2l_csi2_enum_frame_size() to
validate if the `fse->code` is supported.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-20-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the `.link_validate()` callback for the video node and move the
format checking into this function. This change allows the removal of
`rzg2l_cru_mc_validate_format()`.
Note, the fmt.format.code and fmt.format.field checks have be dropped as
the subdev .set_fmt() handler ensures that those fields always hold valid
values.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-19-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the unused `datatype` field from the `rzg2l_csi2_format` struct and
update the `rzg2l_csi2_formats[]` array to reflect the updated structure.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-18-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the `rzg2l_cru_ip_formats` array in `rzg2l_cru_ip_enum_frame_size()`
to validate the format code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-17-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make use of v4l2_format_info() helpers to determine the input and
output formats.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-16-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the `rzg2l_cru_format_bytesperline()` function and inline the
calculation of `bytesperline` directly in `rzg2l_cru_format_align()`.
This simplifies the code by removing an unnecessary function call and
directly multiplying the image width by the `bpp` (bytes per pixel)
from the format structure.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-15-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor the handling of supported formats in the RZ/G2L CRU driver by
adding `pixelformat` and `bpp` members to the `rzg2l_cru_ip_format`
structure.
New helper functions, `rzg2l_cru_ip_format_to_fmt()` and
`rzg2l_cru_ip_index_to_fmt()`, are added to retrieve format information
based on 4CC format and index, respectively. These helpers allow the
removal of the now redundant `rzg2l_cru_format_from_pixel()` function.
The new helpers are used in `rzg2l_cru_format_bytesperline()`,
`rzg2l_cru_format_align()`, and `rzg2l_cru_enum_fmt_vid_cap()`,
streamlining the handling of supported formats and improving code
maintainability.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-14-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Inline the `rzg2l_cru_format_sizeimage()` function into its single
caller as the function is trivial and is not expected to be called
anywhere else.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-13-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the `rzg2l_cru_ip_format` struct to `rzg2l-cru.h` for better
accessibility and add a `datatype` member to it, allowing the
configuration of the ICnMC register based on the MIPI CSI2 data type.
Also, move the `rzg2l_cru_ip_code_to_fmt()` function to `rzg2l-cru.h`
to streamline format lookup and make it more accessible across the
driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
`WARN_ON(!fmt)` check in `rzg2l_cru_format_bytesperline()` is unnecessary
because the `rzg2l_cru_format_align()` function ensures that a valid
`pixelformat` is set before calling `rzg2l_cru_format_bytesperline()`. As
a result, `rzg2l_cru_format_from_pixel()` is guaranteed to return a
non-NULL value, making the check redundant.
Additionally, the return type of `rzg2l_cru_format_bytesperline()` is
`u32`, but the code returned `-EINVAL`, a negative value. This mismatch is
now resolved by removing the invalid error return path.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Simplified the `rzg2l_cru_ip_format` struct by removing the unused
`datatype` and `bpp` fields from the structure in `rzg2l-ip.c`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The INF field in the ICnMC register accepts data type codes as specified
in the MIPI CSI-2 v2.1 specification. This patch introduces the
`ICnMC_INF()` macro to use the MIPI CSI-2 data types, which are available
in the `media/mipi-csi2.h` header.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the CSI virtual channel number from `struct rzg2l_cru_csi`.
Instead, pass the CSI virtual channel number as an argument to
`rzg2l_cru_csi2_setup()`.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/G2L CRU needs to configure the ICnMC.VCSEL bits to specify which
virtual channel should be processed from the four available VCs. To
retrieve this information from the connected subdevice, the
.get_frame_desc() function is called.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/G2L CRU requires information about which VCx to process data from,
among the four available VCs. To obtain this information, the
.get_frame_desc() routine is implemented. This routine, in turn, calls
.get_frame_desc() on the remote sensor connected to the CSI2 bridge.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The media_entity_pads_init() function was previously hardcoded to use a
magic number for the number of pads. Replace the magic number with the
ARRAY_SIZE() macro to determine the number of pads dynamically.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to
ensure pipeline validation fails if it is not connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to
ensure pipeline validation fails if it is not connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
As per the hardware manual section 35.2.3.26 'AXI Master Transfer
Setting Register for CRU Image Data', it is mentioned that to improve
the transfer performance of CRU, it is recommended to use AXILEN value
'0xf' for AXI burst max length setting for image data.
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240905111828.159670-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The current logic allows word to be less than 2. If this happens,
there will be buffer overflows, as reported by smatch. Add extra
checks to prevent it.
While here, remove an unused word = 0 assignment.
Fixes: 6c96dbbc2a ("[media] s5p-jpeg: add support for 5433")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The current order of locking between the driver mutex and the v4l2 subdev
state lock causes a circular locking dependency when trying to set up a
link. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fix spelling in commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move request_irq() to probe(), in order to avoid requesting IRQ during
device start which happens frequently. As this function is in probe(), it
is better to replace it with its devm variant for managing the resource
efficiently.
While at it, drop the IRQF_SHARED flag as currently there is a single user
for this IRQ.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for Raspberry Pi CFE. The CFE is a hardware block that
contains:
- MIPI D-PHY
- MIPI CSI-2 receiver
- Front End ISP (FE)
The driver has been upported from the Raspberry Pi kernel commit
88a681df9623 ("ARM: dts: bcm2712-rpi: Add i2c<n>_pins labels").
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some R-Car SoCs are capable of capturing RAW10. Extend the format
enumeration, validation and setup to expose and configure for this
format if the particular device supports it.
The VIN is usually capable of converting from most media bus formats to
a range of different pixel formats. However if the input media bus
format is a RAW10 format this is not possible so the corresponding pixel
output format is forced.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the Gen4 family compatible. This will be used instead of a SoC
specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and
V4H) have already been added prior and their bindings need to be kept
for backward compatibility.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4M is the second Gen4 device that is enabled in the rcar-csi2
driver. There is much overlap with the already supported V4H device. The
registers that where new on Gen4 and where added with the V4H prefix are
retained and only new registers unique to the V4M are added with the new
V4M prefix. This follows the style for when V4H was added which had an
overlap with Gen3 registers.
The V4M CSI-2 receiver supports D-PHY mode only, either in 1-, 2- or
4-lane configuration. The datasheets do not document lane swapping and
is left out for now.
While the V4M only supports D-PHY the configuration for it is added in
such a way that it can be reused for V4H which supports both C-PHY and
D-PHY. No known SoC exists to test the D-PHY configuration on V4H so
it's not wired-up.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Later datasheets add documentation for two magic value used for V4H
support. The same registers will also be used for V4M support, document
them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Prepare for V4M support by moving the PHTW write helpers to the generic
write helpers. This is needed as adding V4M support will involve
interact with the PHTW register from code that are logically grouped
with similar code in such a way that forward declarations of these
helpers would otherwise be needed.
The functions are moved verbatim.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The structure mapping a configuration information to a particular mpbs
setting needs to be extended with more information to support future
SoCs. Before it is extended reduce code duplication by creating a helper
to lookup information from an array of mbps setting, the lookup code
has already been copied to two speared locations.
While at it rename the structure to make it clear it contains
information related to a mbps setting, not just a single register value.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the registers used on the R-Car V4M CSI-2 IP are shared with the
devices already supported by the rcar-csi2 driver. Two registers which
function and layout are the same are however found on different offsets.
Prepare for adding support for R-Car V4M by storing the offset to these
two registers offsets in the device information structured. This way the
code, which is shared between the devices, can be reused when V4M
support is added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
