Prepare for extending the driver to in addition to supporting the
channel selector (CS) also support the core ISP. The two different
functions have different base addresses so the driver needs to
distinguish between them.
Prepare for this by marking existing base address variable and
read/write functions to make it clear they operate on the CS portion of
the driver. There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250423163113.2961049-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Before extending the driver with functions from the R-Car ISP core that
will span multiple files move the existing driver to a separate
directory. While at it rename the single source file to allow future
files to be grouped by functions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250423163113.2961049-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fix the following to get RAW10 formats working:
In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
16-bit containers, the bpp should be 2.
Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
Through Mode", used for YUV formats and should not be set for RAW10.
Fixes: 1b7e7240ea ("media: rcar-vin: Add support for RAW10")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-4-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On Gen4 we need to set VNMC's EXINF to a different value (1) than in
Gen3 (0). Add a define for this, and set the bit for Gen4.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-3-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove unnecessary checks wrt. formats and interfaces in rvin_setup().
The validity of the formats has already been checked earlier.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-2-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently Gen4 VINs are marked as RCAN_GEN3 models. Add a new enum
value, RCAR_GEN4, and use it for Gen4 VINs. No functional changes in
this patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-1-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Standardize reporting of rectangles to (t,l)/wxh.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In an effort to emulate support for SEQ_{TB,BT} in the R-Car VIN driver
on data captured from a CVBS input a hack was added to detect NTSC vs
PAL. This is ugly and as support for emulated SEQ_{TB,BT} have been
removed from the VIN driver remove the ugly hack.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When shutting down capture extra care was needed to try and complete a
buffer that was involved in the emulated support for SEQ_{TB,BT}. This
was needed as a buffer might be queued once to the driver, but two times
to the hardware using different offsets.
As support for SEQ_{TB,BT} is now removed this shutdown process can be
greatly simplified. And in addition the state keeping of the VIN device
can be reduced to a single boolean value instead of keeping track of
this SEQ_{TB,BT} stopping dance.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The STARTING state is superfluous and can be replaced with a check of
the sequence counter. The design idea is that the first buffer returned
from the driver have to come from the first hardware buffer slot.
Failing this the first 3 buffers queued to the device can be returned
out-of-order.
But it's much clearer to check the sequence counter to only return the
first buffer if it comes from hardware slot 0 then it is to carry around
an extra state just for this. Remove the unneeded state and replace it
with a simpler check.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VIN state of suspended is superfluous. The logic was that when the
device were suspended and in a RUNNING state the state was set to
SUSPENDED. And when resuming it checked if the state is SUSPENDED and if
so started the device and changed it to RUNNING.
This can be avoided by simply checking if the device is in a RUNNING
state at both suspend and resume callbacks. Remove the unneeded
complexity.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When the driver was converted from soc_camera software support for
V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT were added. This was done by
capturing twice to the same VB2 buffer, but at different offsets.
This turned out to be a bad idea and it never really worked properly in
all situations. As the hardware can't support this mode natively remove
trying to emulate it in software. It's still possible to capture TOP or
BOTTOM fields separately or both ALTERNATING. If user-space wants the
same fields in the same buffer the same hack to capture twice to the
same buffer can be done.
Removing this error prone emulated support pave ways in future work to
simplify the internal buffer handling and making it less fragile, while
enabling adding support for other features the hardware actually
supports.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CRU block on the Renesas RZ/G3E SoC is similar to the one found on
the Renesas RZ/G2L SoC, with the following differences:
- Additional registers rzg3e_cru_regs.
- A different irq handler rzg3e_cru_irq.
- A different rzg3e_cru_csi2_setup.
- A different max input width.
- Additional stride register.
Introduce rzg3e_cru_info struct to handle differences between RZ/G2L
and RZ/G3E and related RZ/G3E functions:
- rzg3e_cru_enable_interrupts()
- rzg3e_cru_enable_interrupts()
- rz3e_fifo_empty()
- rzg3e_cru_csi2_setup()
- rzg3e_cru_get_current_slot()
Add then support for the RZ/G3E SoC CRU block with the new compatible
string "renesas,r9a09g047-cru".
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-18-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a `csi_setup` function pointer to the `rzg2l_cru_info` structure and
pass it as part of the OF data. On RZ/G3E and RZ/V2H(P) SoCs, additional
register configurations are required compared to the RZ/G2L SoC.
Modify `rzg2l_cru_csi2_setup()` to be referenced through this function
pointer and update the code to use it accordingly.
This change is in preparation for adding support for RZ/G3E and RZ/V2H(P)
SoCs.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-17-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a `fifo_empty` function pointer to the `rzg2l_cru_info` structure and
pass it as part of the OF data. On RZ/G3E and RZ/V2H(P) SoCs, checking if
the FIFO is empty requires a different register configuration.
Implement `rzg2l_fifo_empty()` and update the code to use it from the
function pointer.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-16-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add `irq_handler` to the `rzg2l_cru_info` structure and pass it as part of
the OF data. This prepares for supporting RZ/G3E and RZ/V2H(P) SoCs, which
require a different IRQ handler. Update the IRQ request code to use the
handler from the OF data.
Add `enable_interrupts` and `disable_interrupts` function pointers to the
`rzg2l_cru_info` structure and pass them as part of the OF data. This
prepares for supporting RZ/G3E and RZ/V2H(P) SoCs, which require different
interrupt configurations.
Implement `rzg2l_cru_enable_interrupts()` and
`rzg2l_cru_disable_interrupts()` functions and update the code to use them
instead of directly writing to interrupt registers.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-15-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add `image_conv` field to the `rzg2l_cru_info` structure to store the
register offset for image conversion control. RZ/G2L uses `ICnMC`, while
RZ/G3E and RZ/V2H(P) use `ICnIPMC_C0`.
Update `rzg2l_cru_initialize_image_conv()` and `rzg2l_cru_csi2_setup()`
to use this `image_conv` offset from the OF data, facilitating future
support for RZ/G3E and RZ/V2H(P) SoCs.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-14-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Pass `max_width` and `max_height` as part of the OF data to facilitate the
addition of support for RZ/G3E and RZ/V2H(P) SoCs. These SoCs have a
maximum resolution of 4096x4096 as compared to 2800x4095 on RZ/G2L SoC.
This change prepares the driver for easier integration of these SoCs by
defining the resolution limits in the `rzg2l_cru_info` structure.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-13-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Prepare for adding support for RZ/G3E and RZ/V2HP SoCs, which have a
CRU-IP that is mostly identical to RZ/G2L but with different register
offsets and additional registers. Introduce a flexible register mapping
mechanism to handle these variations.
Define the `rzg2l_cru_info` structure to store register mappings and
pass it as part of the OF match data. Update the read/write functions
to check out-of-bound accesses and use indexed register offsets from
`rzg2l_cru_info`, ensuring compatibility across different SoC variants.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-12-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The D-PHY on the RZ/V2H(P) SoC is different from the D-PHY on the RZ/G2L
SoC. To handle this difference, function pointers for D-PHY enable/disable
have been added, and the `struct rzg2l_csi2_info` pointer is passed as OF
data.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-11-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/V2H(P) SoC does not require a `system` clock for the CSI-2
interface. To accommodate this, introduce a `has_system_clk` bool flag
in the `rzg2l_csi2_info` structure and update the rzg2l_csi2_probe() to
conditionally request the clock only when needed.
This patch is in preparation for adding support for RZ/V2H(P) SoC.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-10-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation for adding support for the RZ/V2H(P) SoC, where the D-PHY
differs from the existing RZ/G2L implementation, introduce a new
rzg2l_csi2_info structure. This structure provides function pointers for
SoC-specific D-PHY enable and disable operations.
Modify rzg2l_csi2_dphy_setting() to use these function pointers instead of
calling rzg2l_csi2_dphy_enable() and rzg2l_csi2_dphy_disable() directly.
Update the device match table to store the appropriate function pointers
for each compatible SoC.
This change prepares the driver for future extensions without affecting
the current functionality for RZ/G2L.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-9-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use newly added devm_pm_runtime_enable() into rzg2l_cru_probe() and
drop unnecessary pm_runtime_disable() from rzg2l_cru_probe() and
rzg2l_csi2_remove().
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-8-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use a local variable for the struct device pointers. This increases code
readability with shortened lines.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-7-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use newly added devm_pm_runtime_enable() into rzg2l_csi2_probe() and
drop error path accordingly. Drop also unnecessary pm_runtime_disable()
from rzg2l_csi2_remove().
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-6-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use a local variable for the struct device pointers. This increases code
readability with shortened lines.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250411170624.472257-5-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Earlier versions of the datasheet where unclear about the stride setting
for RAW8 capture formats. Later datasheets clarifies that the stride
only process in this mode for non-image data. For image data the full
stride shall be used. Compare section "RAW: 8 Bits and Embedded 8-Bit
Non-Image Data, User Defined 8-bit Data" vs "RAW: 8 Bits".
Remove the special case from pixel formats that carry image data and
treat it as any other image format.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250402183302.140055-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Drop the legacy .s_stream and convert to .{enable|disable}_streams.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Drop the legacy .s_stream and convert to .{enable|disable}_streams.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Convert to subdev state. This allows us to drop the internal mutex and
risp_get_pad_format(), and add streams support in the future.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Instead of directly using V4L2_CID_PIXEL_RATE and calculating the mbps
from that, use v4l2_get_link_freq(), which also supports
V4L2_CID_LINK_FREQ.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add RAW8, RAW10 and RAW12 formats.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add RAW10 and RAW12 formats. We only need to add the entries to the
rcar_csi2_format list.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the Y8 entry before Y10, so that the entries are in a bit more
logical order.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The latest datasheet (Rev.0.70) updates the D-PHY start-up sequence for
D-PHY operation. Unfortunately the datasheet do not add any additional
documentation on the magic values.
This have been tested together with the MAX96724 available on the single
board test platform and it works as expected.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Later versions of the V4H datasheet adds documentation for the line
order register needed to support all possible configurations. Extend the
driver to take the line order for each data line into account when
configuring the device.
Unfortunately not all registers initially thought to be involved in line
order configuration where directly related. One magic value is still in
the driver and left as-is, but it is not related to line order as that
procedure have now been documented.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcxMXceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1IgH/A3O7KIy/VR7D7O3
usbLqk1V+YWs/NsVdewEL/SYfXjCxqnejdk/AvN3ZAIxFeMHhAmcSCKno3zKgK9L
ML4kDrz22dPlA0XncNM8qKTCqAMgXTur1wafv3NAjutg0D3eHvAp0BW0GO5px93G
+kt3kOY32UaB+2Fl1GIub777pRi5U4u5AboQTu3x0TdRZJtV1pqgeddGoymNn6mi
xmMVbY3r5MXJQyHntoT9FIuxK3d+jGcgRHP5RWr53+vAUEFdlXiGcJV4dUXsuQNa
sEKJutCaUqQeiamjoo4bRZO7/2OAPX9Sv7sNIXD/irZZJmCcWr+GDCcUmL69Mjg7
7mx6XrM=
=HYUx
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Add a 'yuv' flag to the `rzg2l_cru_ip_format` structure to indicate
whether a given format is YUV-based and update the `rzg2l_cru_ip_formats`
array with this flag appropriately. This change enables a more efficient
way to check if the input and output formats use the same colorspace.
With this change, we can eliminate the use of `v4l2_format_info()` in
`rzg2l_cru_initialize_image_conv()` as the necessary details for the source
and destination formats are already available through the `yuv` flag.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-24-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the RZ/G2L CRU register definitions from `rzg2l-video.c` to a
dedicated header file, `rzg2l-cru-regs.h`. Separating these definitions
into their own file improves the readability of the code.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-23-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor the ICnDMR register configuration in
`rzg2l_cru_initialize_image_conv()` by adding a new member `icndmr` in the
`rzg2l_cru_ip_format` structure.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-21-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make use of `rzg2l_csi2_formats` array in rzg2l_csi2_enum_frame_size() to
validate if the `fse->code` is supported.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-20-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the `.link_validate()` callback for the video node and move the
format checking into this function. This change allows the removal of
`rzg2l_cru_mc_validate_format()`.
Note, the fmt.format.code and fmt.format.field checks have be dropped as
the subdev .set_fmt() handler ensures that those fields always hold valid
values.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-19-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the unused `datatype` field from the `rzg2l_csi2_format` struct and
update the `rzg2l_csi2_formats[]` array to reflect the updated structure.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-18-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the `rzg2l_cru_ip_formats` array in `rzg2l_cru_ip_enum_frame_size()`
to validate the format code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-17-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Make use of v4l2_format_info() helpers to determine the input and
output formats.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-16-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the `rzg2l_cru_format_bytesperline()` function and inline the
calculation of `bytesperline` directly in `rzg2l_cru_format_align()`.
This simplifies the code by removing an unnecessary function call and
directly multiplying the image width by the `bpp` (bytes per pixel)
from the format structure.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-15-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor the handling of supported formats in the RZ/G2L CRU driver by
adding `pixelformat` and `bpp` members to the `rzg2l_cru_ip_format`
structure.
New helper functions, `rzg2l_cru_ip_format_to_fmt()` and
`rzg2l_cru_ip_index_to_fmt()`, are added to retrieve format information
based on 4CC format and index, respectively. These helpers allow the
removal of the now redundant `rzg2l_cru_format_from_pixel()` function.
The new helpers are used in `rzg2l_cru_format_bytesperline()`,
`rzg2l_cru_format_align()`, and `rzg2l_cru_enum_fmt_vid_cap()`,
streamlining the handling of supported formats and improving code
maintainability.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-14-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Inline the `rzg2l_cru_format_sizeimage()` function into its single
caller as the function is trivial and is not expected to be called
anywhere else.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-13-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the `rzg2l_cru_ip_format` struct to `rzg2l-cru.h` for better
accessibility and add a `datatype` member to it, allowing the
configuration of the ICnMC register based on the MIPI CSI2 data type.
Also, move the `rzg2l_cru_ip_code_to_fmt()` function to `rzg2l-cru.h`
to streamline format lookup and make it more accessible across the
driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
`WARN_ON(!fmt)` check in `rzg2l_cru_format_bytesperline()` is unnecessary
because the `rzg2l_cru_format_align()` function ensures that a valid
`pixelformat` is set before calling `rzg2l_cru_format_bytesperline()`. As
a result, `rzg2l_cru_format_from_pixel()` is guaranteed to return a
non-NULL value, making the check redundant.
Additionally, the return type of `rzg2l_cru_format_bytesperline()` is
`u32`, but the code returned `-EINVAL`, a negative value. This mismatch is
now resolved by removing the invalid error return path.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Simplified the `rzg2l_cru_ip_format` struct by removing the unused
`datatype` and `bpp` fields from the structure in `rzg2l-ip.c`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The INF field in the ICnMC register accepts data type codes as specified
in the MIPI CSI-2 v2.1 specification. This patch introduces the
`ICnMC_INF()` macro to use the MIPI CSI-2 data types, which are available
in the `media/mipi-csi2.h` header.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the CSI virtual channel number from `struct rzg2l_cru_csi`.
Instead, pass the CSI virtual channel number as an argument to
`rzg2l_cru_csi2_setup()`.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/G2L CRU needs to configure the ICnMC.VCSEL bits to specify which
virtual channel should be processed from the four available VCs. To
retrieve this information from the connected subdevice, the
.get_frame_desc() function is called.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RZ/G2L CRU requires information about which VCx to process data from,
among the four available VCs. To obtain this information, the
.get_frame_desc() routine is implemented. This routine, in turn, calls
.get_frame_desc() on the remote sensor connected to the CSI2 bridge.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The media_entity_pads_init() function was previously hardcoded to use a
magic number for the number of pads. Replace the magic number with the
ARRAY_SIZE() macro to determine the number of pads dynamically.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to
ensure pipeline validation fails if it is not connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mark the sink and source pad with the MEDIA_PAD_FL_MUST_CONNECT flag to
ensure pipeline validation fails if it is not connected.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20241018133446.223516-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
As per the hardware manual section 35.2.3.26 'AXI Master Transfer
Setting Register for CRU Image Data', it is mentioned that to improve
the transfer performance of CRU, it is recommended to use AXILEN value
'0xf' for AXI burst max length setting for image data.
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240905111828.159670-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move request_irq() to probe(), in order to avoid requesting IRQ during
device start which happens frequently. As this function is in probe(), it
is better to replace it with its devm variant for managing the resource
efficiently.
While at it, drop the IRQF_SHARED flag as currently there is a single user
for this IRQ.
Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some R-Car SoCs are capable of capturing RAW10. Extend the format
enumeration, validation and setup to expose and configure for this
format if the particular device supports it.
The VIN is usually capable of converting from most media bus formats to
a range of different pixel formats. However if the input media bus
format is a RAW10 format this is not possible so the corresponding pixel
output format is forced.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the Gen4 family compatible. This will be used instead of a SoC
specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and
V4H) have already been added prior and their bindings need to be kept
for backward compatibility.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4M is the second Gen4 device that is enabled in the rcar-csi2
driver. There is much overlap with the already supported V4H device. The
registers that where new on Gen4 and where added with the V4H prefix are
retained and only new registers unique to the V4M are added with the new
V4M prefix. This follows the style for when V4H was added which had an
overlap with Gen3 registers.
The V4M CSI-2 receiver supports D-PHY mode only, either in 1-, 2- or
4-lane configuration. The datasheets do not document lane swapping and
is left out for now.
While the V4M only supports D-PHY the configuration for it is added in
such a way that it can be reused for V4H which supports both C-PHY and
D-PHY. No known SoC exists to test the D-PHY configuration on V4H so
it's not wired-up.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Later datasheets add documentation for two magic value used for V4H
support. The same registers will also be used for V4M support, document
them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Prepare for V4M support by moving the PHTW write helpers to the generic
write helpers. This is needed as adding V4M support will involve
interact with the PHTW register from code that are logically grouped
with similar code in such a way that forward declarations of these
helpers would otherwise be needed.
The functions are moved verbatim.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The structure mapping a configuration information to a particular mpbs
setting needs to be extended with more information to support future
SoCs. Before it is extended reduce code duplication by creating a helper
to lookup information from an array of mbps setting, the lookup code
has already been copied to two speared locations.
While at it rename the structure to make it clear it contains
information related to a mbps setting, not just a single register value.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the registers used on the R-Car V4M CSI-2 IP are shared with the
devices already supported by the rcar-csi2 driver. Two registers which
function and layout are the same are however found on different offsets.
Prepare for adding support for R-Car V4M by storing the offset to these
two registers offsets in the device information structured. This way the
code, which is shared between the devices, can be reused when V4M
support is added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The helper to write an array of code and data values to the PHY Test
Interface Write Register (PHTW) register uses the case where both code
and data are zero as an exit condition. This prevents writing data = 0
and code = 0 to the register.
Up until now this has been OK as no such combination where needed, and
it was a convenient exit condition. In future writing data = 0 and code
= 0 to the PHTW register will be needed.
Avoid using an exit condition when writing an array of PHTW values and
instead pass the length of the array to the helper. This allows any
combination of code and data to be written.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The data and code written thru the Test Interface Write Register (PHTW)
register are 8-bit wide, change the datatype used to reflect this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The vb2_queue_init() will expect the vb2_queue lock pointer to be set in
the future. So for those drivers that set the lock later, move it up to
before the vb2_queue_init() call.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZsyE6yIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95k7BQBAPr1eeaeSOtm
263AFY9iCU0nSOziFfF1GdUeffxflPk/AP9pj9rQbHRds0U4pPJaz9RgfTi7OQ6I
WXk1BFD3FJM9Cw==
=WENl
-----END PGP SIGNATURE-----
Merge tag 'next-media-20240826' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Improvements to link validation in media graph.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240826141040.GC11033@pendragon.ideasonboard.com/
The v4l2_subdev_link_validate() helper prints a warning if the
.link_validate() operation is not implemented for video devices
connected to the subdevs. Implement the operation to silence the
warning.
Ideally validation of the link between the video device and the subdev
should be implemented in that operation. That would however break
userspace that does not configure formats on all video devices before
starting streaming. While this mode of operation may not be considered
valid by the V4L2 API specification (interpretation differ), it is
nonetheless supported by the vsp1 driver at the moment and used by at
least the vsp1 unit test suite, and possibly other userspace
applications. Removing it would be a regression.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add the Gen4 family compatible. This will be used instead of a SoC
specific compatible for the new Gen4 SoC V4M. Two Gen4 boards (V3U and
V4H) have already been added prior and their bindings need to be kept
for backward compatibility.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240704161620.1425409-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The rzg2l-csi2 driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes: 51e8415e39 ("media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240731164935.308994-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Some VSP modules initialize their control handler after initializing the
subdev, while some initialize it before. This makes the code
inconsistent and more error prone. Standardize on control initialization
after initializing the subdev.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
To prepare for the removal of the vsp1_entity.state field, pass the
state to all entity operations that needs to access it, instead of
accessing the state from the entity inside the operation handlers. This
lowers the number of accesses to the field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
checkpatch.pl complains when function arguments are not named:
WARNING: function definition argument 'struct vsp1_entity *' should also have an identifier name
+ void (*configure_stream)(struct vsp1_entity *,
In preparation for reworking some of the vsp1_entity_operations
functions, fix the warnings for the existing ones.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Entities access various piece of information from the subdev state when
configuring a partition. The same data is available through the
partition structure passed to the .configure_partition() operation. Use
it to avoid accessing the state, which will simplify moving to the V4L2
subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The DRM pipelines don't partition frames, as the hardware operates
synchronously with the display. The entity operations access
configuration data from the entity state in that case, instead of
accessing the partition structure. This requires special cases in
entity-specific code, increasing the driver complexity.
To prepare for simplifying the code, initialize a single partition for
the DRM pipelines, similarly to how video pipelines create one partition
spanning the full image when partitioning isn't needed. The partition is
allocated statically in the vsp1_drm_pipeline structure instead of
dynamically as for video pipelines, as DRM pipelines are guaranteed to
operate on a single partition.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Some of the code that handles pipeline configuration assumes that
entities in a pipeline's entities list are sorted from sink to source.
To prepare for using that code with the DRM pipeline, insert the BRx
just before the WPF, and the RPFs at the head of the list.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
It is useful for debugging purpose to dump a vsp1_pipeline to the kernel
log. Add a new function to do so, and use it when initializing the video
and DRM pipelines.
As __vsp1_pipeline_dump() needs to construct the log message
iteratively, it uses pr_cont(...) (exact equivalent to the more verbose
"printk(KERN_CONT ..."). The function thus can't use dev_dbg() to log
the initial part of the message, for two reasons:
- pr_cont() doesn't seem to work with dev_*(). Even if the format string
passed to dev_*() doesn't end with a '\n', pr_cont() starts a new line
in the log. This behaviour doesn't seem to be clearly documented, and
may or may not be on purpose.
- Messages printed by dev_dbg() may be omitted if dynamic debugging is
enabled. In that case, the continuation messages will still be
printed, leading to confusing log messages.
To still benefit from the dynamic debug infrastructure, we declare a
vsp1_pipeline_dump() macro that uses _dynamic_func_call() when dynamic
debugging is enabled. The whole vsp1_pipeline_dump() call can be
selected at runtime. The __vsp1_pipeline_dump() function then uses a
plain "printk(KERN_DEBUG ...)" to print the message header using the
debug log level, and pr_cont() to print the rest of the message on the
same line.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The vsp1_partition_window structure is used to store the horizontal size
of a partition window. This is all that is currently needed, as all
partitions span the whole image vertically. The horizontal window size
is retrieved in the .configure_partition() handler from the
vsp1_partition_window structure, and the vertical window size from the
subdev state.
Accessing the subdev state in the .configure_partition() handler is
problematic in the context of moving to the V4L2 subdev active state
API, as .configure_partition() is called in non-interruptable context,
and the state lock can't be taken. To avoid this, start by storing the
vertical size in the window, replacing the custom vsp1_partition_window
structure with a v4l2_rect. Retrieving the vertical size from the window
in .configure_partition() will be done in a subsequent change.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The entity .configure_partition() function operates on a partition, and
has to retrieve that partition from the pipeline's current partition
field. Pass the partition pointer to the function to make it clearer
what partition it operates on, and remove the vsp1_pipeline.partition
field.
This change clearly shows that the DRM pipeline doesn't use partitions,
which makes entity implementation more complex and error-prone. This
will be addressed in a further cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The vsp1_partition structure stores the RPF partition configuration in a
single field for all RPF instances, while each RPF can have its own
configuration. Fix it by storing the configuration separately for each
RPF instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fixes: ab45e85851 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm")
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
When calculation a partition in vsp1_pipeline_calculate_partition(),
there is no need to handle the case where the whole image is covered by
a single partition locally. In that case, the index and div_size
parameters are 0 and format->width respectively, which makes the general
code behave exactly as the special case. Drop the special case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The partition calculation code, located in vsp1_video.c, is not specific
to video pipelines. To prepare for its usage in DRM pipelines, move it
to vsp1_pipe.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The histogram module is the only one that has a custom .get_fmt()
handler, to handle the special case of the output format being fixed.
This can equally well be handled in the .set_fmt() handler instead.
Beside avoiding special cases and using the same .get_fmt() handler in
all modules, it ensures that the correct format is stored in the active
state for the source pad, including when .set_fmt() is called from
vsp1_entity_init_state(). Both are needed to later switch to the V4L2
subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The brx_get_compose() function is just a wrapper around
v4l2_subdev_state_get_compose() without any added value. Drop it and
call v4l2_subdev_state_get_compose() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The vsp1_rwpf_get_crop() function is just a wrapper around
v4l2_subdev_state_get_crop() without any added value. Drop it and call
v4l2_subdev_state_get_crop() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The vsp1_entity_get_pad_selection() function is just a wrapper around
v4l2_subdev_state_get_crop() or v4l2_subdev_state_get_compose() without
any added value. Drop it and call the functions it wraps directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
The vsp1_entity_get_pad_format() function is just a wrapper around
v4l2_subdev_state_get_format() without any added value. Drop it and call
v4l2_subdev_state_get_format() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
