In order to prepare for supporting the SM8650 SoC, move the
iris_platform_sm8550.c file into iris_platform_gen2.c that will
contain all the common HFI GEN2x structures.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e Dell
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The vpu33 HW is very close to vpu3, and shares most of the
operations, so rename file to vpu3x since we'll handle all vpu3
variants in it.
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e Dell
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Build-testing on x86 showed two modules with conflicting "iris.ko"
names after the addition of the qualcomm driver:
error: the following would cause module name conflict:
arch/x86/platform/iris/iris.ko
drivers/media/platform/qcom/iris/iris.ko
Since this a new module, nothing should rely on the name yet, so
rename this one to a more specific "qcom-iris.ko".
Fixes: 38506cb7e8 ("media: iris: add platform driver for iris video device")
Cc: Shérab <Sebastien.Hinderer@ens-lyon.org> # for x86 iris
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Initialize the platform data and enable video driver probe of SM8250
SoC.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement power scaling including a specific vpu2 and vpu3 calculation
for clock and bus bandwidth, which depends on the hardware
configuration, codec format, resolution and frame rate.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
During the stream on operation, send HFI_CMD_START on the capture and
output planes to start processing on the respective planes.
During the stream off operation, send HFI_CMD_STOP to the firmware,
which is a synchronous command. After the response is received by the
firmware, the session is closed on the firmware.
Introduce different states for the instance and state transitions.
IRIS_INST_INIT - video instance is opened.
IRIS_INST_INPUT_STREAMING - stream on is completed on output plane.
IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane.
IRIS_INST_STREAMING - stream on is completed on both output and capture
planes.
IRIS_INST_DEINIT - video instance is closed.
IRIS_INST_ERROR - error state.
|
v
-------------
+---------| INIT |--------- +
| ------------- |
| ^ ^ |
| / \ |
| / \ |
| v v |
| ----------- ----------- |
| | INPUT OUTPUT | |
|---| STREAMING STREAMING |---|
| ----------- ----------- |
| ^ ^ |
| \ / |
| \ / |
| v v |
| ------------- |
|--------| STREAMING |-----------|
| ------------- |
| | |
| | |
| v |
| ----------- |
+-------->| DEINIT |<----------+
| ----------- |
| | |
| | |
| v |
| ---------- |
+-------->| ERROR |<-----------+
----------.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Initialize the control handler by reading the platform specific firmware
capabilities. Capabilities are features, which are supported by a
specific platform (SOC). Each capability is defined with a min, max,
range and default value and a corresponding HFI. Implement s_ctrl and
g_volatile_ctrl ctrl ops.
Co-developed-by: Vedang Nagar <quic_vnagar@quicinc.com>
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the
driver with necessary hooks.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement runtime power management for iris, including a platform
specific power on/off sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Host firmware interface (HFI) is a well defined set of interfaces
for the communication between the host driver and the firmware. The
commands and responses are exchanged in form of packets. One or multiple
packets are grouped under the packet header. Each packet has a packet
type which describes the specific HFI and the payload, which holds the
corresponding value for that HFI.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Set the memory region on the firmware and implement the boot sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Load/unload the firmware into/from memory via the MDT loader.
The firmware is loaded as part of core initialization and unloaded as
part of core de-initialization.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce a core state management for iris driver with the necessary
queues needed for the host firmware communication.
There are 3 types of queues:
Command queue - driver to write any command to firmware.
Message queue - firmware to send any response to the driver.
Debug queue - for the firmware to write debug messages.
Initialize and configure the shared queues during probe.
Different states for core:
IRIS_CORE_DEINIT - default state.
IRIS_CORE_INIT - core state with core initialized. FW loaded and HW
brought out of reset, shared queues established
between host driver and firmware.
IRIS_CORE_ERROR - error state.
-----------
|
V
-----------
| DEINIT |
-----------
^
/ \
/ \
/ \
/ \
v v
----------- ----------.
| INIT |-->| ERROR |
----------- ----------.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement open, close and poll ops.
Open:
Configure the vb2 queue and v4l2 file handler. Allocate a video instance
and add the instance to core instance list.
Close:
Free the instance and remove it from core instance list.
Poll:
Wait for an event on vb2 src and vb2 dst queues.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation for adding H264 decode functionality, add the probe and
remove functions and platform data to initialize iris resources, which
are clocks, interconnects, power domains, reset clocks, and clock
frequencies used for the iris hardware.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
