The -supply postfix is wrong but wasn't noticed on the CRD devices or
indeed the Dell devices, however on Lenovo devices the error comes up.
Fixes: 1830cf0f56 ("media: qcom: camss: Add x1e80100 specific support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: reworded commit log per Konrad's feedback]
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For sake of code simplicity and readability reduce the function code by
one level of indentation, the change is non-functional.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: Fixed indentation error]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A media device can and at least for sake of simplicity should be registered
before V4L2 devices including the ones added on async completion.
The change removes the second and out of camss_probe() media device
registration path, and it allows to get a working ISP media device
independently from connected or not sensor devices.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It's sufficient to have just one previously set csiphy_formats_sdm845 data.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A call to media_device_init() requires media_device_cleanup() counterpart
to complete cleanup and release any allocated resources.
This has been done in the driver .remove() right from the beginning, but
error paths on .probe() shall also be fixed.
Fixes: a1d7c116fc ("media: camms: Add core files")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In various places in CAMSS we assume a linear set of declared devices
{csiphy0, csiphy1, csiphy2} which currently works for upstream SoCs but for
upcoming SoCs some of the SoC resources will result in a set such as
{csiphy0, csiphy2} which will break the naive for() loops we have.
Introduce an identity property which resource declarations can populate
hence facilitating non-linear resource naming.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently the Qualcomm CAMSS driver only supports D-PHY while the
hardware on most SoCs also supports C-PHY. Until this support is added,
check for D-PHY to make it somewhat explicit that C-PHY won't work.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Call v4l2_get_link_freq() on a pad, instead of a control handler. This way
we can soon convert v4l2_get_link_freq() to be callable only on a pad and
remove the compatibility code.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com> # rp1-cfe
Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> # st-mipid02
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The camera subsystem for the SDM670 the same as on SDM845 except with
3 CSIPHY ports instead of 4. Add support for the SDM670 camera
subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CSID in sm8550 is version 780, it has new register offset
and new functionality. The buf done irq, register update and
reset are moved to CSID 780.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a PHY configuration sequence and PHY resource for the sm8550 which
uses a Qualcomm Gen 2 version 2.1.2 CSI-2 PHY.
The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add CAMSS_8550 enum, sm8550 compatible and sm8550 camss drvier private
data, the private data just include some basic information now, later
changes will enumerate with csiphy, csid and vfe resources.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RUP registers and buf done irq are moved from the IFE to CSID register
block on recent CAMSS implementations. Add callbacks structure to wrapper
the location change with minimum logic disruption.
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update clock names to make them consistent with existing platform i.e
sc8280xp. Rename gcc_cam_hf_axi to gcc_axi_hf and add gcc_axi_sf.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This reverts commit cc1ecabe67.
This commit has a basic flaw in that it relies on camss->res->csid_num as a
control to index the array camss->vfe[i].
Testing on a platform where csid_num > vfe_num showed this bug up.
camss->vfe should only be indexed by camss->res->vfe_num. Since this commit
is meant to make the code be more readable reverting will simply restore
the previous correct bounds checking.
We can make another pass at making camss_link_entities look prettier but,
for now we should zap the bug introduced.
Fixes: cc1ecabe67 ("media: qcom: camss: Restructure camss_link_entities")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor the camss_link_entities function by breaking it down into
three distinct functions. Each function will handle the linking of
a specific entity separately.
SC7280 and later targets mandates for 1:1 linking for csid -> vfe.
i.e. csid0 can be mapped to vfe0 only.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introducing a new function camss_link_err to avoid repition of
same error message, improving code maintainability.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This commit describes the hardware layout for the MSM8953
for the following hardware blocks:
- 2 x VFE, 3 RDI per VFE
- 3 x CSID
- 3 x CSI PHY
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On Qualcomm SM8250 SoC there are two sets of regulators, and each of
both sets is specific to six CSIPHY IPs. At the moment there is no
proper split of two "combined" regulators with quite arbitrary selected
names in the driver or platform CAMSS device tree node, however for sake
of clarity and better hardware description it makes sense to move the
currently existing regulator resources from all CSID subdevices to all
CSIPHY subdevices.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
New SoCs have CSID devices inside of a shared "wrapper" i.e. a set of regs
which is responsible for manging the muxes of the CSID to various other
blocks throughout CAMSS.
Not every SoC has this top-level muxing layer so make it optional depending
on whether its declared as a resource or not.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is a chance to meet runtime issues during configuration of CAMSS
power domains, because on the error path dev_pm_domain_detach() is
unexpectedly called with NULL or error pointer.
One of the simplest ways to reproduce the problem is to probe CAMSS
driver before registration of CAMSS power domains, for instance if
a platform CAMCC driver is simply not built.
Warning backtrace example:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a2
<snip>
pc : dev_pm_domain_detach+0x8/0x48
lr : camss_probe+0x374/0x9c0
<snip>
Call trace:
dev_pm_domain_detach+0x8/0x48
platform_probe+0x70/0xf0
really_probe+0xc4/0x2a8
__driver_probe_device+0x80/0x140
driver_probe_device+0x48/0x170
__device_attach_driver+0xc0/0x148
bus_for_each_drv+0x88/0xf0
__device_attach+0xb0/0x1c0
device_initial_probe+0x1c/0x30
bus_probe_device+0xb4/0xc0
deferred_probe_work_func+0x90/0xd0
process_one_work+0x164/0x3e0
worker_thread+0x310/0x420
kthread+0x120/0x130
ret_from_fork+0x10/0x20
Fixes: 23aa4f0cd3 ("media: qcom: camss: Move VFE power-domain specifics into vfe.c")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
pm_runtime_enable() should happen prior to vfe_get() since vfe_get() calls
pm_runtime_resume_and_get().
This is a basic race condition that doesn't show up for most users so is
not widely reported. If you blacklist qcom-camss in modules.d and then
subsequently modprobe the module post-boot it is possible to reliably show
this error up.
The kernel log for this error looks like this:
qcom-camss ac5a000.camss: Failed to power up pipeline: -13
Fixes: 02afa816db ("media: camss: Add basic runtime PM support")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoVNHOTI0PKMNt4_@hovoldconsulting.com/
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add check for the return value of v4l2_fwnode_endpoint_parse() and
return the error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Decouple the direct calls to VFE's vfe_get/put in the CSID subdev
in order to prepare for the introduction of IFE subdev.
Also decouple CSID base address from VFE since on the Titan platform
CSID register base address resides within VFE's base address.
Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Following the example of VFE and CSID, attach the CSIPHY
formats to the subdevices resources.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Following the example of VFE, move all formats of the decoder
to camss-csid.c and attach them to the subdevices resources.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Video node formats have direct dependency by the sub-device pad formats.
Remove dependency for SoC version and move format definitions in device
which creates video node.
This commit attaches a struct to the VFE resources that holds format
description, so it is much easier to assign them to the video node.
No need to use a switch-case.
NOTE: The mbus_bpp is used to calculate the clock rates and is different
from bpp which is the bits per pixel written to memory. We need to keep
both values to not break the calcualtions.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Currently resources structure grows with additional parameters required for
each sub-deivce. However each sub-device has some specific resources or
configurations which need to be passed during the initialization.
This change adds per sub-device type structure to simplify the things
and removes the magical void pointer to hw_ops.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This commit describes the hardware layout for the sc8280xp for the
following hardware blocks:
- 4 x VFE, 4 RDI per VFE
- 4 x VFE Lite, 4 RDI per VFE
- 4 x CSID
- 4 x CSID Lite
- 4 x CSI PHY
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Declare power-domain names "top", "ife0" and "ife1" eponymously for the
power-domains TITAN_TOP_GDSC, IFE_0_GDSC and IFE_1_GDSC respectively.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some platforms such as SC7280 have 3 CSIDs and 2 CSID-lites but current
code has hardcoded 2 as the maximum number of CSIDs. Remove the hardcoded
maximum number of VFEs to handle all possible combinations of CSIDs and
CSID-lites.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some platforms such as SC7280 have three VFEs and two VFE-lites. Current
code has hard-coded two as the maximum number of VFEs. Remove the
hard-coded maximum number of VFEs to handle all possible combinations of
VFEs and VFE-lites.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311200405.h6G4L9oe-lkp@intel.com
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Right now we use fixed indexes to assign power-domains, with a
requirement for the TOP GDSC to come last in the list.
Adding support for named power-domains means the declaration in the dtsi
can come in any order.
After this change we continue to support the old indexing - if a SoC
resource declaration or the in-use dtb doesn't declare power-domain names
we fall back to the default legacy indexing.
From this point on though new SoC additions should contain named
power-domains, eventually we will drop support for legacy indexing.
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Moving the location of the hooks to VFE power domains has several
advantages.
1. Separation of concerns and functional decomposition.
vfe.c should be responsible for and know best how manage
power-domains for a VFE, excising from camss.c follows this
principle.
2. Embedding a pointer to genpd in struct camss_vfe{} meas that we can
dispense with a bunch of kmalloc array inside of camss.c.
3. Splitting up titan top gdsc from vfe/ife gdsc provides a base for
breaking up magic indexes in dtsi.
Suggested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
At the moment we have some complex code for determining if a VFE requires a
power-domain attachment. Particularly discordant in this scheme is the
subtle reliance on VFE and VFE Lite declaration ordering in our resources.
VFE id is used to determine if a VFE is lite or not and consequently if a
VFE requires power-domain attachment. VFE Lite though is not a correct
delineation between power-domain and non power-domain state since early
SoCs have neither VFE Lite nor power-domains attached to VFEs.
Introduce has_pd to the VFE resource structure to allow the CAMSS code to
understand if it needs to try to attach a power-domain for a given VFE.
As a side-effect from this we no longer need to care about VFE Lite or
non-Lite or the id number associated with either and which order the
VFE/VFE Lite was declared in.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Each Video Front End - VFE - has a variable number of Raw Data Interfaces -
RDIs associated with it.
The CAMSS code started from a naive implementation where a fixed define was
used as a control in a for(){} loop iterating through RDIs.
That model scales badly. An attempt was made with VFE_LINE_NUM_GEN2 and
VFE_LINE_NUM_GEN1 to differentiate between SoCs but, the problem with that
is "gen1" and "gen2" have no meaning in the silicon. There is no fixed
constraint in the silicon between VFE and RDI, it is entirely up to the SoC
designers how many VFEs are populated and how many RDIs to associate with
each VFE.
As an example sdm845 has VFE version 175 and sm8250 VFE version 480.
sdm845 has 2 VFEs with 4 RDIs and 1 VFE Lite with 4 RDIs.
sm8250 has 2 VFEs with 3 RDIs and 2 VFE Lite with 4 RDIs.
Clearly then we need a more granular model to capture the necessary data.
The defines have gone away to be replaced with per-SoC data but, we haven't
populated the parameter data with the real values.
Let's call those values out now
msm8916:
1 x VFE
3 x RDI per VFE (not 4)
msm8996:
2 x VFE
3 x RDI per VFE (not 4)
sdm660:
2 x VFE
3 x RDI per VFE (not 4)
sdm845:
2 x VFE
4 x RDI per VFE (not 3)
1 x VFE Lite
4 x RDI per VFE Lite (not 3)
sm8250:
2 x VFE
3 x RDI per VFE (not 4)
2 x VFE Lite
4 x RDI per VFE Lite
This more complex and correct mapping was not possible prior to passing
values via driver data. Now that we have that change in place we can
correctly map VFEs to RDIs for each VFE.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It is possible to pass all of the CAMSS subdevice internal operations
pointers from the controlling resources structure with an additional
pointer added to the resources structure.
This allows for the removal of most of the probe-time control structures.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
line_num indicates the number of RDI - raw data interface channels which
are associated with a given IFE/VFE - image/video front end.
On several SoCs the RDI number is not static for each VFE - for example
on sm8250 VFE Lite has four RDIs where regular VFE has three.
Assigning line_num statically in the subdev_init() phase initialises
each VFE to the lower number, meaning in practical terms that we are
lobbing off one RDI on some VFEs.
Interrupt handling uses static for (i = RDI0; i < RDI2; i++) {} in some
of our VFE blocks but this can't work for situations where we have a
mixture of VFE @ 3 RDI and VFE-lite @ 4 RDI blocks.
First step to remediate is to pass line_num from a compat string
controlled data-structure and do so on a per-VFE basis.
Later patches will assign the correct number of RDI blocks per VFE.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The following variables are being assigned statically based on
compatible strings in the probe path.
* enum camss_version version;
* unsigned int csiphy_num;
* unsigned int csid_num;
* unsigned int vfe_num;
* unsigned int vfe_lite_num;
* unsigned int vfe_total_num;
Migrate those variables to resource parameters passed in on platform
probe arguments. The one caveat is for VFE it has been necessary to
intoduce a new variable vfe_total_num to capture the aggregate value of
vfe_num + vfe_lite_num.
All the rest of the changes are rote camss->variable to
camss->res->variable with the parameter tables now populating the listed
variables.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pass the bandwidth table as a platform parameter not if/else derived
pointer to the static table.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is a lot of unnecessary if/elsing in this code that arguably
should never have made it upstream when adding a second let alone
subsequent SoC.
I'm guilty of not fixing the mess myself when adding in the sm8250.
Before adding in any new SoCs or resources lets take the time to cleanup
the resource passing.
First step is to pass the generic struct camss_resources as a parameter
per the compatible list.
Subsequent patches will address the other somewhat disparate strutures
which we are also doing if/else on and assigning statically.
Squashed down a commit to drop useless NULL assignment for ispif resources.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rename non-specific struct resources {} to struct camss_subdev_resources {}
Each logical block in CAMSS has a number of regulators, clocks and resets
associated with it. We represent these blocks as v4l subdevices.
The name "struct camss_subdev_resources" is a more descriptive and accurate
name.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no good reason to differentiate the two resource structures
here. As part of a general tidyup of the declaration and passing of
resources within in the CAMSS driver it will be advantageous to have
one unified resource structure.
The two structures are very similar anyway thus leading more credence
still to the argument there should be only one.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
