Use the cmdq_pkt_create() and cmdq_pkt_destroy() common functions
instead of implementing specific mdp3 versions.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to have fine-grained control, use cmdq_pkt_eoc() and
cmdq_pkt_jump_rel() to replace cmdq_pkt_finalize().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
cmdq_pkt_write_mask() boils down to a cmdq_pkt_write() when the mask is
0xFFFFFFFF. Call cmdq_pkt_write() directly in those cases to simplify
the code.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The platform compatibility checks for MT8183 and
MT8195 in mdp_cmdq_prepare() are redundant as they are
done in __get_config_offset() itself. Furthermore
there are two if-else branch in __get_config_offset()
which have similar conditions and are redundant.
To address this, remove the check in mdp_cmdq_prepare()
and combine the two if-else branch into one in
__get_config_offset().
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use an API that resembles more the actual use of job_count.
Found by cocci:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:527:5-24: WARNING: atomic_dec_and_test variation before object free at line 541.
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:578:6-25: WARNING: atomic_dec_and_test variation before object free at line 581.
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-12-3c4865f5a4b0@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In some chips, MDP3 has the ability to utilize two pipelines to
parallelly process a single frame.
To enable this feature, multiple CMDQ clients and packets need to
be configured at the same time.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Extend the component settings used in MT8195 MDP3.
Additionally, it is crucial to read all component settings in
a specific manner to ensure that shared memory data structure lengths
are aligned across different platforms.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Certain chips can combine several components to form complex virtual
units with advanced functions.
These components require simultaneous configuration of their MODs and
clocks.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some components act as bridges only and do not require full configuration.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Increasing the number of sets built by MMSYS and MUTEX in MT8195
will enable the creation of more pipelines in MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After setting up the second set of MMSYS (VPPSYS1), it is necessary
to have a corresponding second set of MUTEX (MUTEX2) to assist in
handling SOF/EOF.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix the build warnings that were detected by the linux-media
build scripts tool:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
In function 'mdp_path_config.isra':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
warning: 'ctx' may be used uninitialized [-Wmaybe-uninitialized]
| out = CFG_COMP(MT8195, ctx->param, outputs[0]);
| ~~~^~~~~~~
drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h: note:
in definition of macro 'CFG_COMP'
| (IS_ERR_OR_NULL(comp) ? 0 : _CFG_COMP(plat, comp, mem))
| ^~~~
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
note: 'ctx' was declared here
| struct mdp_comp_ctx *ctx;
|
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The communication between the MDP3 kernel driver and SCP is to
pass a shared memory through the cooperation of "mtk-mdp3-vpu.c" and
remoteproc driver.
The data structure of this shared memory is defined in "mtk-img-ipi.h",
as shown below:
vpu->work_addr -> +-----------------------------------------+
| |
| To SCP : Input frame parameters |
| (struct img_ipi_frameparam) |
| |
vpu->pool -> +-----------------------------------------+
| |
| From SCP : Output component config pool |
| (struct img_config) |
| |
| *struct img_config 1 |
| | |
| | |
| v |
| *struct img_config N |
| (N = MDP_CONFIG_POOL_SIZE) |
+-----------------------------------------+
One output component configuration contains the components
currently used by the pipeline, and has the register settings
that each component needs to set.
Since the quantity, type and function of components on each chip
will vary, the effect is that the size of the "struct img_config"
and its substructures will be different on each chip.
In addition, all chips will have to update their SCP firmware for
every change if the output component config structure is defined
and shared by a common header.
Therefore, all functions that operate on "struct img_config" and
its substructures must be separated by chips and so are the
relevant definations.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In MDP3, a pipe is used to represent a data path which
consisting of different components and MUTEX, as shown in
the following diagram:
+----------------------------+
| MUTEX [*1] |
+----------------------------+
S ^ S ^ S ^ S ^ S ^
| | | | | | | | | |
| | | | | | | | | |
+--------------+ | | | | | | | | +-------------+
| +--------------+ | | | | | | +-------------+ |
| | +------+ | | | | +------+ | |
| | | +------+ | | +------+ | | |
| | | | | | | | | |
| | | | | | | | | |
v E v E v E v E v E
+-------+ +-----+ +-------+ +-----+ +-------+
B>--->| RDMA0 |>-->| PQ |>-->| RSZ0 |>-->| PQ |>-->| WROT0 |>-->B
+-------+ +-----+ +-------+ +-----+ +-------+
[*1] MUTEX is SOF/EOF signal controller
[*2] S = Start of frame (SOF)
[*3] E = End of frame (EOF)
[*4] B = frame buffer
More pipes will be introduced in future chips for applications such as
higher frame rate frequency, which should integrate and reorder related
information into specific chip config file.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For different chips, different types and numbers of components are
configured in the MDP3 to achieve the desired application, which will
cause ID compatibility problems in the same driver.
Subdivide the component ID into two kinds:
1. public_id (compatible with other chips)
2. inner_id (what the current chip actually owns)
In addition, the chip configuration related structures of MDP3 components
are integrated into specific file.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add goto statement in mdp_comp_clock_on() to avoid error code not being
propagated or returning positive values.
This change also performs a well-timed clock_off when an error occurs, and
reduces unnecessary error logging in mdp_cmdq_send().
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Increase and refine the goto label in mdp_cmdq_send() to avoid
double free and facilitate traceability.
Also, remove redundant work queue event in blocking function
mdp_cmdq_send().
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix two errors reported by smatch:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:292
mdp_probe() error: we previously assumed 'mdp' could be null
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:460
mdp_cmdq_send() error: we previously assumed 'cmd' could be null
Also, avoid warnings reported by smatch:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:872
mdp_comp_create() warn: passing devm_ allocated variable to kfree. 'comp'
[hverkuil: fix devm_kfree call]
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3).
It provides the following functions:
color transform, format conversion, resize, crop, rotate, flip
and additional image quality enhancement.
The MDP3 driver is mainly used for Google Chromebook products to
import the new architecture to set the HW settings as shown below:
User -> V4L2 framework
-> MDP3 driver -> SCP (setting calculations)
-> MDP3 driver -> CMDQ (GCE driver) -> HW
Each modules' related operation control is sited in mtk-mdp3-comp.c
Each modules' register table is defined in file with "mdp_reg_" prefix
GCE related API, operation control sited in mtk-mdp3-cmdq.c
V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
Probe, power, suspend/resume, system level functions are defined in
mtk-mdp3-core.c
[hverkuil: add 'depends on REMOTEPROC']
Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com>
Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
