The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e ("media: venus: pm_helpers: use opp-table for the frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=oX7n
-----END PGP SIGNATURE-----
Merge tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2 core:
- sub-device framework routing improvements
- NV12M tiled variants added to v4l2_format_info
- some fixes at control handler freeing logic
- fixed H264 SEPARATE_COLOUR_PLANE check
- new staging driver: Intel IPU7 PCI
- Rockchip video decoder driver got promoted from staging
- iris: added HEVC/VP9 encoder/decoder support
- vsp1: driver has gained Renesas VSPX support
- uvc:
- switched to vb2 ioctl helpers
- added MSXU 1.5 metadata support
- atomisp: GC0310 sensor driver cleanups in preparation for moving it
out of staging
- Lots of cleanup, fixes and improvements
* tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits)
media: rkvdec: Unstage the driver
media: rkvdec: Remove TODO file
media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings
media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings
media: amphion: Support dmabuf and v4l2 buffer without binding
media: verisilicon: postproc: 4K support
media: v4l2: Add support for NV12M tiled variants to v4l2_format_info()
media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating
media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META
media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5
media: uvcvideo: Introduce dev->meta_formats
media: Documentation: Add note about UVCH length field
media: uvcvideo: Do not mark valid metadata as invalid
media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic
media: core: export v4l2_translate_cmd
media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL
media: uvcvideo: Remove stream->is_streaming field
media: uvcvideo: Split uvc_stop_streaming()
media: uvcvideo: Handle locks in uvc_queue_return_buffers
media: uvcvideo: Use vb2 ioctl and fop helpers
...
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
The TODO list for unstaging being empty, the driver can now be moved to the
main media folder.
Also add myself as maintainer.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When using VB2_DMABUF, the relationship between dma-buf and v4l2 buffer
may not one-to-one, a single dma-buf may be queued via different
v4l2 buffers, and different dma-bufs may be queued via the same
v4l2 buffer, so it's not appropriate to use the v4l2 buffer index
as the frame store id.
We can generate a frame store id according to the dma address.
Then for a given dma-buf, the id is fixed.
Driver now manages the frame store and vb2-buffer states independently.
When a dmabuf is queued via another v4l2 buffer before the buffer is
released by firmware, need to pend it until firmware release it.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Support input larger than 4096x2048 using extended input width/height
fields of swreg92.
This is needed to decode large WebP or JPEG pictures.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Commit 6f1466123d ("media: s5p-mfc: Add YV12 and I420 multiplanar
format support") added support for the new formats to s5p-mfc driver,
what in turn required some internal calls to the v4l2_format_info()
function while setting up formats. This in turn broke support for the
"old" tiled NV12MT* formats, which are not recognized by this function.
Fix this by adding those variants of NV12M pixel format to
v4l2_format_info() function database.
Fixes: 6f1466123d ("media: s5p-mfc: Add YV12 and I420 multiplanar format support")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The code dealing with the 0 terminated meta_formats array is a bit klunky
especially for the uvc_meta_v4l2_enum_formats() case.
Instead of 0 terminating add an unsigned int nmeta_formats member to struct
uvc_device and use that. This leads to slightly cleaner code.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Ricardo Ribalda <ribalda@chrium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org> # Camera with MSXU_CONTROL_METADATA
Link: https://lore.kernel.org/r/20250708104622.73237-2-hansg@kernel.org
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If the camera supports the MSXU_CONTROL_METADATA control, auto set the
MSXU_META quirk.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-5-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The UVC driver provides two metadata types V4L2_META_FMT_UVC, and
V4L2_META_FMT_D4XX. The only difference between the two of them is that
V4L2_META_FMT_UVC only copies PTS, SCR, size and flags, and
V4L2_META_FMT_D4XX copies the whole metadata section.
Now we only enable V4L2_META_FMT_D4XX for the Intel D4xx family of
devices, but it is useful to have the whole metadata payload for any
device where vendors include other metadata, such as the one described by
Microsoft:
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/mf-capture-metadata
This patch introduces a new format V4L2_META_FMT_UVC_MSXU_1_5, that is
identical to V4L2_META_FMT_D4XX.
Let the user enable this format with a quirk for now. This way they can
test if their devices provide useful metadata without rebuilding the
kernel. They can later contribute patches to auto-quirk their devices.
We will also work in methods to auto-detect devices compatible with this
new metadata format.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-4-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Right now, there driver supports devices with one or two metadata
formats. Prepare it to support more than two metadata formats.
This is achieved with the introduction of a new field `meta_formats`,
that contains the array of metadata formats supported by the device, in
the order expected by userspace.
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-3-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently, the driver performs a length check of the metadata buffer
before the actual metadata size is known and before the metadata is
decided to be copied. This results in valid metadata buffers being
incorrectly marked as invalid.
Move the length check to occur after the metadata size is determined and
is decided to be copied.
Cc: stable@vger.kernel.org
Fixes: 088ead2552 ("media: uvcvideo: Add a metadata device node")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-1-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Instead of listing the IOCTLs that do not need to turn on the camera,
list the IOCTLs that need to turn it on. This makes the code more
maintainable.
This patch changes the behaviour for unsupported IOCTLs. Those IOCTLs
will not turn on the camera.
Suggested-by: Hans Verkuil <hans@jjverkuil.nl>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans Verkuil <hans@hverkuil.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-7-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
video_translate_cmd() can be useful for drivers to convert between the
VIDIOC_*32 and VIDIOC_ defines. Let's export it.
Now that the function is exported, use this opportunity to rename the
function with the v4l2_ prefix, that is less ambiguous than video_
The VIDIOC_*32 defines are not accessible by the drivers, they live in
v4l2-compat-ioctl32.c.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-6-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If we subscribe to an event with V4L2_EVENT_SUB_FL_SEND_INITIAL, the
driver needs to report back some values that require the camera to be
powered on. But VIDIOC_SUBSCRIBE_EVENT is not part of the ioctls that
turn on the camera.
We could unconditionally turn on the camera during
VIDIOC_SUBSCRIBE_EVENT, but it is more efficient to turn it on only
during V4L2_EVENT_SUB_FL_SEND_INITIAL, which we believe is not a common
usecase.
To avoid a list_del if uvc_pm_get() fails, we move list_add_tail to the
end of the function.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Fixes: d1b618e795 ("media: uvcvideo: Do not turn on the camera for some ioctls")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-5-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The is_streaming field is used by modular PM to know if the device is
currently streaming or not.
With the transition to vb2 and fop helpers, we can use vb2 functions for
the same functionality. The great benefit is that vb2 already tracks the
streaming state for us.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-4-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
uvc_stop_streaming() is used for meta and video nodes. Split the function
in two to avoid confusion.
Use this opportunity to rename uvc_start_streaming() to
uvc_start_streaming_video(), as it is only called by the video nodes.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-3-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Most of the calls to uvc_queue_return_buffers() wrap the call with
spin_lock_irq()/spin_unlock_irq().
Rename uvc_queue_return_buffers to __uvc_queue_return_buffers to
indicate that this is the version that does not handle locks and create
a new version of the function that handles the lock.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-2-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When uvc was written the vb2 ioctl and file operation helpers didn't exist.
This patch switches uvc over to those helpers, which removes a lot of
boilerplate code and allows us to drop the 'privileges' scheme, since
that's now handled inside the vb2 helpers.
This makes it possible for uvc to fix the v4l2-compliance streaming tests:
warn: v4l2-test-formats.cpp(1075): Could not set fmt2
This patch introduces a change on behavior on the uvcdriver to be
aligned with the rest of the subsystem. Now S_INPUT, S_PARM and
S_FORMAT do no grant exclusive ownership of the device.
There are other side effects, some better than others:
- Locking is now more coarse than before, the queue is locked for almost
every ioctl.
- vidioc_querybuf() can now work when the queue is busy.
Future patches should look into the locking architecture of UVC to
remove one of stream->mutex or queue->mutex.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Co-developed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-1-250286570ee7@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This was returning IS_ERR() where PTR_ERR() was intended.
Fixes: 642b70d526 ("media: imx8mq-mipi-csi2: Add support for i.MX8QXP")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/9b6c7925-c9c4-44bd-acd5-1ef0e698eb87@sabinyo.mountain
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There are no consumer left of g_pixelaspect in the tree, remove the
implementation from the adv748x driver in preparation of removing it
from struct v4l2_subdev_video_ops all together.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250705083741.77517-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There are no consumer left of g_pixelaspect in the tree, remove the
implementation from the adv7180 driver in preparation of removing it
from struct v4l2_subdev_video_ops all together.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250705083741.77517-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The pad-aware version of v4l2_get_link_freq() tries to retrieve the link
frequency from the media bus configuration using the get_mbus_config
operation, and only if the subdevice does not implement this operation
falls back to the old method of getting it using the V4L2_CID_LINK_FREQ
or V4L2_CID_PIXEL_RATE control.
Update the VIN driver to use the pad-aware version to be able to support
subdevices that only provides the link frequency in the media bus
configuration. As the implementation falls back to the old method if the
subdevice doesn't support get_mbus_config, or doesn't provide a link
frequency in the v4l2_mbus_config struct, this is fully backward
compatible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250530-rcar-streams-v3-1-026655df7138@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The core helper v4l2_i2c_subdev_init() already assignees the subdevices
dev pointer to the device associated with the i2c client passed to it.
And 'imx290->dev' is assigned to '&client->dev' already in probe before
calling imx290_subdev_init().
Remove the duplicated open-coded assignment in the driver, there is no
reason to do it twice.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
ov2659_probe() doesn't properly free control handler resources in failure
paths, causing memory leaks. Add v4l2_ctrl_handler_free() to prevent these
memory leaks and reorder the ctrl_handler assignment for better code flow.
Fixes: c4c0283ab3 ("[media] media: i2c: add support for omnivision's ov2659 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hynix hi556 support 8 test pattern modes:
hi556_test_pattern_menu[] = {
{
"Disabled",
"Solid Colour",
"100% Colour Bars",
"Fade To Grey Colour Bars",
"PN9",
"Gradient Horizontal",
"Gradient Vertical",
"Check Board",
"Slant Pattern",
}
The test pattern is set by a 8-bit register according to the
specification.
+--------+-------------------------------+
| BIT[0] | Solid color |
+--------+-------------------------------+
| BIT[1] | Color bar |
+--------+-------------------------------+
| BIT[2] | Fade to grey color bar |
+--------+-------------------------------+
| BIT[3] | PN9 |
+--------+-------------------------------+
| BIT[4] | Gradient horizontal |
+--------+-------------------------------+
| BIT[5] | Gradient vertical |
+--------+-------------------------------+
| BIT[6] | Check board |
+--------+-------------------------------+
| BIT[7] | Slant pattern |
+--------+-------------------------------+
Based on function above, current test pattern programming is wrong.
This patch fixes it by 'BIT(pattern - 1)'. If pattern is 0, driver
will disable the test pattern generation and set the pattern to 0.
Fixes: e62138403a ("media: hi556: Add support for Hi-556 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In commit 7d3c7d2a29 ("media: i2c: Add a camera sensor top level menu")
a top level menu was added for sensor drivers so that all sensor drivers
would depend on I2C and so that MEDIA_CONTROLLER, V4L2_FWNODE and
VIDEO_V4L2_SUBDEV_API would be automatically selected for all sensor
drivers.
All lens drivers must depend on I2C and VIDEO_DEV and must select
MEDIA_CONTROLLER, V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API and most already
do, but e.g. VIDEO_V4L2_SUBDEV_API is not consistenly selected.
Change the "Lens drivers" menu into a menuconfig option with
the necessary depends and selects. This ensures that these options are
depended on / selected consistently and simplifies the Kconfig snippets
for the various lens voice coil drivers.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411061152.VKd9JYpa-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use regulator_bulk_* to get the array of potential power rails for
the hi556.
Previously the driver only supported avdd as only avdd is used on IPU6
designs. But other designs may also need the driver to control the other
power rails and the new INT3472 handshake support also makes use of
dvdd on IPU6 designs.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2368506
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
probe() requests the reset GPIO to be set to high when getting it.
Immeditately after this hi556_resume() is called and sets the GPIO low.
If the GPIO was low before requesting it this will result in the GPIO
only very briefly spiking high and the sensor not being properly reset.
The same problem also happens on back to back runtime suspend + resume.
Fix this by adding a sleep of 2 ms in hi556_resume() before setting
the GPIO low (if there is a reset GPIO).
The final sleep is kept unconditional, because if there is e.g. no reset
GPIO but a controllable clock then the sensor also needs some time after
enabling the clock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
User-space can provide cache hints to enable software managed cache
operations or skip certain cache operations using memory flags and buffer
flags. This is useful for SoCs such as AM62px which do not support
hardware cache coherency.
This is tested on AM62px with yavta capture by passing
V4L2_MEMORY_FLAG_NON_COHERENT while using VIDIOC_REQBUFS and
V4L2_BUF_FLAG_NO_CACHE_CLEAN while using VIDIOC_QBUF and ~5x reduction in
memcpy time is seen for copying captured frame to DDR.
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1452545/am62p-the-ads6311-radar-camera-has-lost-frame-capture/5580472#5580472
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Acked-by: Jai Luthra <jai.luthra@linux.dev>
[Sakari Ailus: Reword and rewrap the commit message a little.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Enable the csi2rx_err_irq interrupt to record any errors during streaming
and also add support for VIDIOC_LOG_STATUS ioctl. This allows users to
retrieve detailed error information during streaming, including FIFO
overflow, packet errors, and ECC errors.
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Tested-by: Jai Luthra <jai.luthra@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Print streams found by v4l2_subdev_collect_streams() at debug level. This
could be useful in debugging drivers, userspace programs or the framework
itself.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Print debug messages early in v4l2_subdev_enable_streams() and
v4l2_subdev_disable_streams(), before sanity checks take place. This can
help figuring out why something goes wrong, in driver development or
otherwise.
Also print the name of the sub-device where streaming is to be enabled or
disabled.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For image data generally 2 seems like a minimum height that surely won't
cause any issues, but some sensors have metadata the height of which is
just one line. Set the minimum height to 1.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The pad argument to v4l2_subdev_state_xlate_streams() is incorrect, static
pad number is used for the source pad even though the pad number is
dependent on the stream. Fix it.
Fixes: 3a5c59ad92 ("media: ipu6: Rework CSI-2 sub-device streaming control")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This will use USB noncoherent API to alloc/free urb buffers, then
stk1160 driver needn't to do dma sync operations by itself.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250704095751.73765-4-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will use USB noncoherent API to alloc/free urb buffers, then
uvc driver needn't to do dma sync operations by itself.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250704095751.73765-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pixel_array control size was calculated incorrectly:
the dimensions were swapped (dims[0] should be the height), and the
values should be the width or height divided by PIXEL_ARRAY_DIV
and rounded up. So don't use roundup, but use DIV_ROUND_UP instead.
This bug is harmless in the sense that nothing will break, except that
it consumes way too much memory for this control.
Fixes: 6bc7643d1b ("media: vivid: add pixel_array test control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reading the hpd or 5v gpios is something that can sleep, so rework
the code to allow this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ensure that the interrupt function names clearly state for which
gpio they are (cec/hpd/5v). No functional changes.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If rx-no-low-drive is set, then the CEC pin framework will disable
the detection of situations where a Low Drive has to be generated.
So if this is set, then we will never generate Low Drives.
This helps testing whether other CEC devices generate Low Drive
pulses by ensuring it is not us that is generating them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This adds support for inserting 'glitches' after a falling and/or
rising edge. This tests what happens when there are little voltage
spikes after falling or rising edges, which can be caused due to
noise or reflections on the CEC line.
A proper CEC implementation will deglitch this, but a poor implementation
can create a Low Drive pulse in response, effectively making CEC unusable.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the EDID is updated, the hotplug detect signal must remain low for
100 ms minimum. Currently these three drivers use that exact minimum,
but some HDMI transmitters need the HPD to be low for a bit longer
before they detect that they need to read the EDID again.
Experience shows that HZ / 7 (= 143 ms) is a good value.
So change HZ / 10 to HZ / 7.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The -supply postfix is wrong but wasn't noticed on the CRD devices or
indeed the Dell devices, however on Lenovo devices the error comes up.
Fixes: 1830cf0f56 ("media: qcom: camss: Add x1e80100 specific support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: reworded commit log per Konrad's feedback]
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For sake of code simplicity and readability reduce the function code by
one level of indentation, the change is non-functional.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: Fixed indentation error]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A media device can and at least for sake of simplicity should be registered
before V4L2 devices including the ones added on async completion.
The change removes the second and out of camss_probe() media device
registration path, and it allows to get a working ISP media device
independently from connected or not sensor devices.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It's sufficient to have just one previously set csiphy_formats_sdm845 data.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
