The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- Improvements & Fixes
* A fix has been implemented in QCOM Flash to prevent incorrect register
access when the driver is re-bound. This is solved by duplicating a static
register array during the probe function, which prevents register addresses
from being miscalculated after multiple binds.
* The LP50xx driver now correctly handles the 'reg' property in device tree
child nodes to ensure the multi_index is set correctly. This prevents
issues where LEDs could be controlled incorrectly if the device tree nodes
were processed in a different order. An error is returned if the reg
property is missing or out of range.
* A Kconfig dependency on between TPS6131x and V4L2_FLASH_LED_CLASS has been
added to prevent a build failure when the driver is built-in and the V4L2
flash infrastructure is a loadable module.
* A potential buffer overflow warning in PCA955x was reported by older GCC
versions has been fixed by using a more precise format specifier when
creating the default LED label.
- Cleanups & Refactoring
* The MAINTAINERS file entry for the TPS6131X flash LED driver has been
corrected to point to the correct device tree binding file name.
* A comment in the Flash Class for the flash_timeout setter has been
corrected to "flash timeout" from "flash duration" for accuracy.
* The of_led_get() function is no longer exported as it has no users
outside of its own module.
- Removals
* The commit to configure LED blink intervals for hardware offload in the
Netdev Trigger has been reverted. This change was found to break existing
PHY drivers by putting their LEDs into a permanent, unconditional blinking
state.
- Device Tree Bindings Updates
* The binding for LP50xx has been updated to document that the child reg
property is the index within the LED bank. The example was also updated to
use correct values.
* The JNCP5623 binding has been updated to add 0x39 as a valid I2C address,
as it is used by the NCP5623C variant.
-----BEGIN PGP SIGNATURE-----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=+8ND
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Improvements & Fixes:
- A fix for QCOM Flash to prevent incorrect register access when the
driver is re-bound. This is solved by duplicating a static register
array during the probe function, which prevents register addresses
from being miscalculated after multiple binds
- The LP50xx driver now correctly handles the 'reg' property in
device tree child nodes to ensure the multi_index is set correctly.
This prevents issues where LEDs could be controlled incorrectly if
the device tree nodes were processed in a different order. An error
is returned if the reg property is missing or out of range
- Add a Kconfig dependency on between TPS6131x and
V4L2_FLASH_LED_CLASS to prevent a build failure when the driver is
built-in and the V4L2 flash infrastructure is a loadable module
- Fix a potential buffer overflow warning in PCA955x reported by
older GCC versions by using a more precise format specifier when
creating the default LED label.
Cleanups & Refactoring:
- Correct the MAINTAINERS file entry for the TPS6131X flash LED
driver to point to the correct device tree binding file name
- Fix a comment in the Flash Class for the flash_timeout setter to
"flash timeout" from "flash duration" for accuracy
- The of_led_get() function is no longer exported as it has no users
outside of its own module.
Removals:
- Revert the commit to configure LED blink intervals for hardware
offload in the Netdev Trigger. This change was found to break
existing PHY drivers by putting their LEDs into a permanent,
unconditional blinking state.
Device Tree Bindings Updates:
- Update the binding for LP50xx to document that the child reg
property is the index within the LED bank. The example was also
updated to use correct values
- Update the JNCP5623 binding to add 0x39 as a valid I2C address, as
it is used by the NCP5623C variant"
* tag 'leds-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: ncp5623: Add 0x39 as a valid I2C address
Revert "leds: trigger: netdev: Configure LED blink interval for HW offload"
leds: pca955x: Avoid potential overflow when filling default_label (take 2)
leds: Unexport of_led_get()
leds: tps6131x: Add V4L2_FLASH_LED_CLASS dependency
dt-bindings: leds: lp50xx: Document child reg, fix example
leds: leds-lp50xx: Handle reg to get correct multi_index
leds: led-class-flash:: Fix flash_timeout comment
MAINTAINERS: Adjust file entry in TPS6131X FLASH LED DRIVER
leds: flash: leds-qcom-flash: Fix registry access after re-bind
Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers
that didn't check the return code. (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the
internal APIs to local variables. (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_*
(Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up.
(Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RExf
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers that didn't
check the return code (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the internal APIs
to local variables (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_* (Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up. (Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)"
* tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Speed up lockdep_unregister_key() with expedited RCU synchronization
locking/mutex: Remove redundant #ifdefs
locking/lockdep: Change 'static const' variables to enum values
locking/lockdep: Avoid struct return in lock_stats()
locking/rwsem: Use OWNER_NONSPINNABLE directly instead of OWNER_SPINNABLE
rust: sync: Add #[must_use] to Lock::try_lock()
locking/mutex: Mark devm_mutex_init() as __must_check
leds: lp8860: Check return value of devm_mutex_init()
spi: spi-nxp-fspi: Check return value of devm_mutex_init()
local_lock: Move this_cpu_ptr() notation from internal to main header
This reverts commit c629c972b3.
While .led_blink_set() would previously put an LED into an unconditional
permanently blinking state, the offending commit now uses same operation
to (also?) set the blink timing of the netdev trigger when offloading.
This breaks many if not all of the existing PHY drivers which offer
offloading LED operations, as those drivers would just put the LED into
blinking state after .led_blink_set() has been called.
Unfortunately the change even made it into stable kernels for unknown
reasons, so it should be reverted there as well.
Fixes: c629c972b3 ("leds: trigger: netdev: Configure LED blink interval for HW offload")
Link: https://lore.kernel.org/linux-leds/c6134e26-2e45-4121-aa15-58aaef327201@lunn.ch/T/#m9d6fe81bbcb273e59f12bbedbd633edd32118387
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6dcc77ee1c9676891d6250d8994850f521426a0f.1752334655.git.daniel@makrotopia.org
Signed-off-by: Lee Jones <lee@kernel.org>
devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will be
marked as unusable and trigger errors on usage.
Add the missed check.
Fixes: 87a59548af ("leds: lp8860: Use new mutex guards to cleanup function exits")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-2-d9e449f4d224@weissschuh.net
GCC compiler v8.5.0 is not happy about printing
into a too short buffer (when build with `make W=1`):
drivers/leds/leds-pca955x.c:696:5: note: 'snprintf' output between 2 and 11 bytes into a destination of size 8
Unfortunately this is a false positive from the old GCC versions,
but we may still improve the code by using '%hhu' format specifier
and reduce buffer size by 4 bytes.
Fixes: bd3d149329 ("leds: pca955x: Avoid potential overflow when filling default_label")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282159.TXfvorYl-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630093906.1715800-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver can optionally use the v4l2_flash infrastructure, but fails to
link built=in if that is in a loadable module:
ld.lld-21: error: undefined symbol: v4l2_flash_release
>>> referenced by leds-tps6131x.c:792 (drivers/leds/flash/leds-tps6131x.c:792)
Add the usual Kconfig dependency for it, still allowing it to be built when
CONFIG_V4L2_FLASH_LED_CLASS is disabled.
Fixes: b338a2ae9b ("leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250620114440.4080938-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.
If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.
If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.
Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
Driver in probe() updates each of 'reg_field' with 'reg_base':
for (i = 0; i < REG_MAX_COUNT; i++)
regs[i].reg += reg_base;
'reg_field' array (under variable 'regs' above) is statically allocated,
thus each re-bind would add another 'reg_base' leading to bogus
register addresses. Constify the local 'reg_field' array and duplicate
it in probe to solve this.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250529063335.8785-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
* Framebuffer Subsystem (fbdev):
* The display's blanking status is now tracked in `struct fb_info`
* `framebuffer_alloc()` initializes the blank state to `FB_BLANK_UNBLANK`
* `register_framebuffer()` sets the state to `FB_BLANK_POWERDOWN` if an `fb_blank`
callback exists, ensuring `FB_EVENT_BLANK` listeners correctly see the display
being turned on during the first modeset
* The `FB_EVENT_BLANK` event data now includes both the new and the old blank states
* Qualcomm WLED Backlight:
* Added a NULL check after `devm_kasprintf()` in `wled_configure()` to prevent a
potential NULL pointer dereference if memory allocation fails
* Framebuffer Subsystem (fbdev):
* `fb_blank()` has been reworked to return early on errors, without functional
changes, in preparation for further state tracking improvements
* Fbdev now calls dedicated functions in the backlight subsystems to notify them
of blank state changes, instead of relying on fbdev event notifiers
* For LCDs, fbdev also calls a dedicated function to notify of mode changes
* Backlight Subsystem:
* Implemented fbdev blank state tracking using the (newly enhanced) blank state
information provided directly by `FB_EVENT_BLANK`
* Removed internal blank state tracking fields (`fb_bl_on`) from
`struct backlight_device`
* Moved the handling of blank-state updates into a separate internal helper
function, `backlight_notify_blank()`
* Removed support for fbdev events and replaced it with a dedicated function call
interface (`backlight_notify_blank()` and `backlight_notify_blank_all()`) for
display drivers to update backlight status
* LCD Subsystem:
* Moved the handling of display updates (blank events and mode changes) from
fbdev event notifiers to separate internal helper functions (`lcd_notify_blank`,
`lcd_notify_mode_change`)
* Removed support for fbdev events and replaced it with dedicated function call
interfaces (`lcd_notify_blank_all()`, `lcd_notify_mode_change_all()`)
* The LCD subsystem now maintains its own internal list of LCD devices instead of
relying on fbdev notifiers
* LED Backlight Trigger:
* Moved the handling of blank-state updates into a separate internal helper,
`ledtrig_backlight_notify_blank()`
* Removed support for fbdev events and replaced it with a dedicated function call,
`ledtrig_backlight_blank()`, for fbdev to notify trigger of blank state changes
* The LED backlight trigger now maintains its own internal list of triggers
instead of relying on fbdev notifiers
* Framebuffer Subsystem (fbdev):
* Removed the definitions for the unused fbdev event constants
`FB_EVENT_MODE_CHANGE` and `FB_EVENT_BLANK` from the header file
-----BEGIN PGP SIGNATURE-----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=jhYi
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Framebuffer Subsystem (fbdev):
- The display's blanking status is now tracked in 'struct fb_info'
- 'framebuffer_alloc()' initializes the blank state to FB_BLANK_UNBLANK
- 'register_framebuffer()' sets the state to 'FB_BLANK_POWERDOWN' if
an 'fb_blank' callback exists, ensuring 'FB_EVENT_BLANK' listeners
correctly see the display being turned on during the first modeset
- The 'FB_EVENT_BLANK' event data now includes both the new and the
old blank states
- 'fb_blank()' has been reworked to return early on errors, without
functional changes, in preparation for further state tracking
improvements
- Fbdev now calls dedicated functions in the backlight subsystems to
notify them of blank state changes, instead of relying on fbdev
event notifiers
- For LCDs, fbdev also calls a dedicated function to notify of mode
changes
- Removed the definitions for the unused fbdev event constants
'FB_EVENT_MODE_CHANGE' and 'FB_EVENT_BLANK' from the header file
Backlight Subsystem:
- Implemented fbdev blank state tracking using the (newly enhanced)
blank state information provided directly by 'FB_EVENT_BLANK'
- Removed internal blank state tracking fields ('fb_bl_on') from
'struct backlight_device'
- Moved the handling of blank-state updates into a separate internal
helper function, 'backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call interface ('backlight_notify_blank()' and
'backlight_notify_blank_all()') for display drivers to update
backlight status
LCD Subsystem:
- Moved the handling of display updates (blank events and mode
changes) from fbdev event notifiers to separate internal helper
functions ('lcd_notify_blank',
'lcd_notify_mode_change')
- Removed support for fbdev events and replaced it with dedicated
function call interfaces ('lcd_notify_blank_all()',
'lcd_notify_mode_change_all()')
- The LCD subsystem now maintains its own internal list of LCD
devices instead of relying on fbdev notifiers
LED Backlight Trigger:
- Moved the handling of blank-state updates into a separate internal
helper, 'ledtrig_backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call, 'ledtrig_backlight_blank()', for fbdev to notify
trigger of blank state changes
- The LED backlight trigger now maintains its own internal list of
triggers instead of relying on fbdev notifiers
Qualcomm WLED Backlight:
- Added a NULL check after 'devm_kasprintf()' in 'wled_configure()'
to prevent a potential NULL pointer dereference if memory
allocation fails"
* tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pm8941: Add NULL check in wled_configure()
fbdev: Remove constants of unused events
leds: backlight trigger: Replace fb events with a dedicated function call
leds: backlight trigger: Move blank-state handling into helper
backlight: lcd: Replace fb events with a dedicated function call
backlight: lcd: Move event handling into helpers
backlight: Replace fb events with a dedicated function call
backlight: Move blank-state handling into helper
backlight: Implement fbdev tracking with blank state from event
fbdev: Send old blank state in FB_EVENT_BLANK
fbdev: Track display blanking state
fbdev: Rework fb_blank()
The TPS61310/TPS61311 is a flash LED driver with I2C interface. Its power
stage is capable of supplying a maximum total current of roughly 1500mA.
The TPS6131x provides three constant-current sinks, capable of sinking up
to 2 x 400mA (LED1 and LED3) and 800mA (LED2) in flash mode. In torch mode
each sink (LED1, LED2, LED3) supports currents up to 175mA.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Link: https://lore.kernel.org/r/20250514-leds-tps6131x-v5-2-a4fb9e7f2c47@emfend.at
Signed-off-by: Lee Jones <lee@kernel.org>
This API allows providers to offer an specific LED to be looked-up by a
consumer. Consumers are then able to describe the aforementioned LED
and take a reference on it.
For convenience, we're testing both sides of the API in just one test
function here. In reality, both the provider and the consumer would be
logistically orthogonal.
CMD:
tools/testing/kunit/kunit.py run --kunitconfig drivers/leds
RESULTS:
[16:38:57] Configuring KUnit Kernel ...
[16:38:57] Building KUnit Kernel ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig
Building with:
$ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=20
[16:39:02] Starting KUnit Kernel (1/1)...
[16:39:02] ============================================================
Running tests with:
$ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt
[16:39:03] ===================== led (2 subtests) =====================
[16:39:03] [PASSED] led_test_class_register
[16:39:03] [PASSED] led_test_class_add_lookup_and_get
[16:39:03] ======================= [PASSED] led =======================
[16:39:03] ============================================================
[16:39:03] Testing complete. Ran 2 tests: passed: 2
[16:39:03] Elapsed time: 6.255s total, 0.001s configuring, 5.131s building, 1.106s running
Link: https://lore.kernel.org/r/20250501081918.3621432-3-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Upon successful LED class device registration, it is expected that
certain attributes are filled out in pre-defined ways. For instance, if
provided, the .brightness_get() call-back should be called to populate
the class device 'brightness' attribute, 'max_brightness' should be
initialised as LED_FULL (at least until we can rid these pesky enums)
and the sysfs group should be created with the class device name
supplied by the caller.
If subsequent registrations take place that would result in name
conflicts, various outcomes are expected depending on which flags are
set. If LED_REJECT_NAME_CONFLICT is disabled, registration should
succeed resulting in an iteration on the provided name. Conversely, if
it's enabled, then registration is expected to fail outright.
We test for all of these scenarios here.
Link: https://lore.kernel.org/r/20250501081918.3621432-2-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
If a KUNIT_ASSERT_*() call ends up in an assertion, the test is marked
as a failure and the subsequent error checking is never executed, making
it superfluous. Remove it for simplicity and to avoid confusion.
Link: https://lore.kernel.org/r/20250501081918.3621432-1-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Remove the stray space between the '.' and the 'data' field name in
the PCA995x device-tree match table.
Signed-off-by: Jesse Karjalainen <jesse@ponkila.com>
Link: https://lore.kernel.org/r/20250426020454.47059-1-jesse@ponkila.com
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-leds-v1-4-2f42d8fbb525@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-leds-v1-3-2f42d8fbb525@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-leds-v1-2-2f42d8fbb525@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250423-gpiochip-set-rv-leds-v1-1-2f42d8fbb525@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
This helps prevent mistakes like disable out of order in cleanup functions
and forgetting to free on error paths (as was done here).
This was the last thing the .remove() function did, so remove that too.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250407183555.409687-6-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Locking is a single register write, so no need to have the unlock
function also lock. This removes the need to pass in the option
and reduces the nesting level in the function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250407183555.409687-5-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
This allows the regulator to be optional which is the same as
done here with all the checks for NULL. This also disables
on remove for us, so remove the manual disabling.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250407183555.409687-4-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
If we are not using regmap caches, then the value will be read
in every time, having a default value does not change anything in
that case. Remove the unused defaults.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250407183555.409687-3-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use scoped mutex guards to simplify return paths. While here use
devm_mutex_init() to register the muxex so it also is cleaned
up automatically.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250407183555.409687-2-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
GCC compiler (Debian 14.2.0-17) is not happy about printing
into a too short buffer (when build with `make W=1`):
drivers/leds/leds-pca955x.c:554:33: note: ‘snprintf’ output between 2 and 12 bytes into a destination of size 8
Indeed, the buffer size is chosen based on some assumptions,
while in general the assigned value might not fit (GCC can't
prove it does).
Fix this by changing the bits field in the struct pca955x_chipdef to u8,
with a positive side effect of the better memory footprint, and convert
loop iterator to be unsigned. With that done, update format specifiers
accordingly.
In one case join back string literal as it improves the grepping over the code
based on the message and remove duplicating information (the driver name is
printed as pert of the dev_*() output [1]) as we touch the same line anyway.
Link: https://lore.kernel.org/r/4ac527f2-c59e-70a2-efd4-da52370ea557@dave.eu/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250407151441.706378-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
When writing to the multi_intensity file, don't unconditionally call
led_set_brightness. By only doing this if blinking is inactive we
prevent blinking from stopping if the blinking is in its off phase while
the file is written.
Instead, if blinking is active, the changed intensity values are applied
upon the next blink. This is consistent with changing the brightness on
monochrome LEDs with active blinking.
Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Tobias Deiminger <tobias.deiminger@linutronix.de>
Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Link: https://lore.kernel.org/r/20250404184043.227116-1-sven@svenschwermer.de
Signed-off-by: Lee Jones <lee@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Replace an on-stack definition of a flexible structure with a call
to utility function cros_ec_cmd().
So, with these changes, fix the following warning:
drivers/leds/leds-cros_ec.c:70:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/Z-rKcgFjsyKvd58q@kspp
Signed-off-by: Lee Jones <lee@kernel.org>
GCC compiler complains about snprintf() calls that may potentially cut
the output:
drivers/leds/led-core.c:551:78: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
drivers/leds/led-core.c:554:78: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
...
Fix these by checking for the potential overflow. This requires
to align all the branches to use the same callee, i.e. snprintf(),
otherwise the code will be blown up and return different error codes
for the different branches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250318160524.2979982-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Accept "default" written to sysfs trigger attr.
If the text "default" is written to the LED's sysfs 'trigger' attr, then
call led_trigger_set_default() to set the LED to its default trigger.
If the default trigger is set to "none", then led_trigger_set_default()
will remove a trigger. This is in contrast to the default trigger being
unset, in which case led_trigger_set_default() does nothing.
Signed-off-by: Craig McQueen <craig@mcqueen.au>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250317022630.424015-1-craig@mcqueen.au
Signed-off-by: Lee Jones <lee@kernel.org>
Remove support for fb events from the led backlight trigger. Provide
the helper ledtrig_backlight_blank() instead. Call it from fbdev to
inform the trigger of changes to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of the fbdev
notifiers, maintain an internal list of led backlight triggers.
v3:
- export ledtrig_backlight_blank()
v2:
- maintain global list of led backlight triggers (Lee)
- avoid IS_REACHABLE() in source file (Lee)
- notify on changes to blank state instead of display state
- use lock guards
- initialize led list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Move the handling of blank-state updates into a separate helper,
so that is can be called without the fbdev event. No functional
changes.
v2:
- rename helper to avoid renaming in a later patch (Lee)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-10-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Since fwnode_get_child_node_count() was split from its device property
counterpart, we may utilise it in the driver and drop custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20250310150835.3139322-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Since fwnode_get_child_node_count() was split from its device property
counterpart, we may utilise it in the driver and drop custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20250310150835.3139322-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
across all blinking LEDs and falls back to software blink if different
frequencies are requested.
* trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
* led-core: Fix a race condition where a quick LED_OFF followed by another
brightness set could leave the LED off incorrectly, especially
noticeable after the introduction of the ordered workqueue.
* qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
* qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
* qcom-lpg: Fix PWM value capping to respect the selected resolution for
Hi-Res PWMs.
* qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to prevent
requested duty cycles from exceeding the maximum allowed by the
selected resolution.
* st1202: Add a check for the error code returned by devm_mutex_init().
* pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
* st1202: Ensure hardware initialization (st1202_setup) happens before DT
node processing (st1202_dt_init).
* Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's required
by the driver.
* lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
* pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
* pca955x: Pass driver data pointers instead of the I2C client to helper
functions.
* pca955x: Optimize probe LED selection logic to reduce I2C operations.
* pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
* st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
* st1202: Minor spacing and proofreading edits in comments.
* Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
* mlxcpld: Remove unused include of acpi.h.
* nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
* tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
* qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- pca955x: Add HW blink support, utilizing PWM0. It supports one
frequency across all blinking LEDs and falls back to software blink
if different frequencies are requested.
- trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
- led-core: Fix a race condition where a quick LED_OFF followed by
another brightness set could leave the LED off incorrectly,
especially noticeable after the introduction of the ordered
workqueue.
- qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
for Hi-Res PWMs.
- qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to
prevent requested duty cycles from exceeding the maximum allowed by
the selected resolution.
- st1202: Add a check for the error code returned by devm_mutex_init().
- pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
- st1202: Ensure hardware initialization (st1202_setup) happens before
DT node processing (st1202_dt_init).
- Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's
required by the driver.
- lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
- pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
- pca955x: Pass driver data pointers instead of the I2C client to
helper functions.
- pca955x: Optimize probe LED selection logic to reduce I2C operations.
- pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
- st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
- st1202: Minor spacing and proofreading edits in comments.
- Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
- mlxcpld: Remove unused include of acpi.h.
- nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
- tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
- qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
* tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (23 commits)
leds: nic78bx: Tidy up ACPI ID table
leds: mlxcpld: Remove unused ACPI header inclusion
leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs
leds: Rename simple directory to simatic
leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN
leds: leds-st1202: Spacing and proofreading editing
leds: leds-st1202: Initialize hardware before DT node child operations
leds: pwm-multicolor: Add check for fwnode_property_read_u32
leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution
leds: Fix LED_OFF brightness race
Revert "leds-pca955x: Remove the unused function pca95xx_num_led_regs()"
leds: st1202: Refactor st1202_led_set() to use !! operator for boolean conversion
dt-bindings: leds: qcom-lpg: Document PM8937 PWM compatible
leds: pca955x: Add HW blink support
leds: pca955x: Optimize probe LED selection
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Refactor with helper functions and renaming
dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format
...
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmfmqKQACgkQUa+KL4f8
d2G+rA//UU3UixCD8FsNN+o4DS7FbxdiSUCrATOBKia9MGfor4xCl6Qk9ZyO4sE1
Rr9zUrTb1xlCmMZupZlkV8TDHHcaiUbgmnKB161d4HMxCbju10MKlm7faz2vRMz3
a73ehTmUeNDiWG3t1/2zAyRt7PHPC2zakUlnXlLhLir12uR2jsDSeGOZh4xR7Hdi
5nkOA2xWbbeW4b+ybwZ32afbLtZFkLo80QvqDx/D9lMUnQO0FqKak0Zope7IzeqC
ilg+tIJOQRGEbjEVQ+pVXsPI6zfmO8eAja70F7sm+Q6TVDw2JhHU/YElHw+quiP+
aLYeE+DuSun1EYlK4ATQ0vzUdgsaOEWblF0eythctXFTfM9ZKhzWYdXEOvco7N4u
R9BYRtM/zGkxiScbr6igyjWZx7NPOsKEKIi5tOv+C2BAKb53om7vsNuMgvMDL/8W
gztmG0SMKwJSx2Dg7h1LLUfa3tG9QRFd0I+Yfaso3MtYmxnZVcJtM5IQbvzf6i/B
3fSiGP6PDNeJqbn9k3/7SB8Tb4XmJUN2LFdDtDuWVhgZpSDULkjpYxAXDIrbp+il
QNdLPiU1x7OzPkFZQxtXLt7yRmlEc2lu9jJHkGVM1M18TMexQiFxoSY9NxkbUj3o
T4s/PKGmRKHP9XxCmRSfu6Veql0MPUwtvkErlUf4GTLWK4oshag=
=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
GPIO core:
- add sanitization of return values of GPIO provider callbacks so that invalid
ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers that return
an integer and allow to indicate driver errors to the GPIO core
- change the interface of all gpiod_set_value() variants to return an integer
thus becoming able to indicate failures in the underlying layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler interface to
gpiod_set_array_value_cansleep() and use it across several drivers treewide
- reduce the number of atomic reads of the descriptor flags in gpiolib debugfs
code
- simplify for_each_hwgpio_in_range() and for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE subsystem
disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't allow
drivers to set it as it should only be handled by GPIO core and start
actually enforcing it in GPIO core for *all* drivers, not only the ones
implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its device in
order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the new value
setter callbacks
- convert several drivers to using automatic lock guards from cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by() and bits.h
macros)
- refactor gpio-latch (use generic device properties, lock guards and some
local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO devices
into its own library
- use str_enable_disable(), str_high_low() and other string helpers where
applicable
- extend the gpio-mmio abstraction layer to allow calling into the pinctrl
back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list
-----BEGIN PGP SIGNATURE-----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=h7Hv
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Tidy up ACPI ID table:
- Drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h and
other necessary headers
- Remove explicit driver_data initializer
- Drop comma in the terminator entry
With that done, extend compile test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250313161630.415515-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
When determining the actual best period by looping through all
possible PWM configs, the resolution currently used is based on
bit shift value which is off-by-one above the possible maximum
PWM value allowed.
So subtract one from the resolution before determining the best
period so that the maximum duty cycle requested by the PWM user
won't result in a value above the maximum allowed by the selected
resolution.
Cc: stable@vger.kernel.org # 6.4
Fixes: b00d2ed376 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-3-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
