The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation.
Fixes: 488ffbf181 ("iommu/riscv: Paging domain support")
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: XianLiang Huang <huangxianliang@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250820072248.312-1-huangxianliang@lanxincomputing.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
These drivers all set the domain->pgsize_bitmap in their
domain_alloc_paging() functions, so the ops value is never used. Delete
it.
Reviewed-by: Sven Peter <sven@svenpeter.dev> # for Apple DART
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com> # for RISC-V
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Nothing in there is active if CONFIG_RISCV_IOMMU is not enabled, so the whole
directory can depend on that switch as well.
Fixes: 5c0ebbd3c6 ("iommu/riscv: Add RISC-V IOMMU platform device driver")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/2235451.Icojqenx9y@devpool92.emlix.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use iommu_alloc_pages_node_sz() instead.
AMD and Intel are both using 4K pages for these structures since those
drivers only work on 4K PAGE_SIZE.
riscv is also spec'd to use SZ_4K.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/21-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
One part of RISCV already has a computed size, however the queue
allocation must be aligned to 4k. The other objects are 4k by spec.
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/18-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Change the internal freelist to use struct iommu_pages_list.
riscv uses this page list to free page table levels that are replaced
with leaf ptes.
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we have a folio under the allocation iommu_free_pages() can know
the order of the original allocation and do the correct thing to free it.
The next patch will rename iommu_free_page() to iommu_free_pages() so we
have naming consistency with iommu_alloc_pages_node().
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When __BITS_PER_LONG == 32, size_t is defined as unsigned int rather
than unsigned long. Therefore, we should use size_t to avoid
type-checking errors.
Fixes: 488ffbf181 ("iommu/riscv: Paging domain support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Link: https://lore.kernel.org/r/20250103024616.3359159-1-guoren@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This commit supplies shutdown callback for iommu driver. The shutdown
callback resets necessary registers so that newly booted kernel can pass
riscv_iommu_init_check() after kexec. Also, the shutdown callback resets
iommu mode to bare instead of off so that new kernel can still use PCIE
devices even when CONFIG_RISCV_IOMMU is not enabled.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Link: https://lore.kernel.org/r/20250103093220.38106-3-luxu.kernel@bytedance.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Changing cqen/fqen/pqen from 0 to 1 sets the cqh/fqt/pqt registers to 0.
But the cqt/fqh/pqh registers are left unmodified. This commit resets
cqt/fqh/pqh registers to ensure corresponding queues are empty before
being enabled during initialization.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Link: https://lore.kernel.org/r/20250103093220.38106-2-luxu.kernel@bytedance.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce first-stage address translation support.
Page table configured by the IOMMU driver will use the highest mode
implemented by the hardware, unless not known at the domain allocation
time falling back to the CPU’s MMU page mode.
This change introduces IOTINVAL.VMA command, required to invalidate
any cached IOATC entries after mapping is updated and/or removed from
the paging domain. Invalidations for the non-leaf page entries use
IOTINVAL for all addresses assigned to the protection domain for
hardware not supporting more granular non-leaf page table cache
invalidations.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/1109202d389f51c7121cb1460eb2f21429b9bd5d.1729059707.git.tjeznach@rivosinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce device command submission and fault reporting queues,
as described in Chapter 3.1 and 3.2 of the RISC-V IOMMU Architecture
Specification.
Command and fault queues are instantiated in contiguous system memory
local to IOMMU device domain, or mapped from fixed I/O space provided
by the hardware implementation. Detection of the location and maximum
allowed size of the queue utilize WARL properties of queue base control
register. Driver implementation will try to allocate up to 128KB of
system memory, while respecting hardware supported maximum queue size.
Interrupts allocation is based on interrupt vectors availability and
distributed to all queues in simple round-robin fashion. For hardware
Implementation with fixed event type to interrupt vector assignment
IVEC WARL property is used to discover such mappings.
Address translation, command and queue fault handling in this change
is limited to simple fault reporting without taking any action.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/c4735fb6829053eff37ce1bcca4906192afd743c.1729059707.git.tjeznach@rivosinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce device context allocation and device directory tree
management including capabilities discovery sequence, as described
in Chapter 2.1 of the RISC-V IOMMU Architecture Specification.
Device directory mode will be auto detected using DDTP WARL property,
using highest mode supported by the driver and hardware. If none
supported can be configured, driver will fall back to global pass-through.
First level DDTP page can be located in I/O (detected using DDTP WARL)
and system memory.
Only simple identity and blocking protection domains are supported by
this implementation.
Co-developed-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/e1c763aeccd2c05fd4ad3a32f6f2ff3b3148d907.1729059707.git.tjeznach@rivosinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Advertise IOMMU device and its core API.
Only minimal implementation for single identity domain type, without
per-group domain protection.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/ba79c8eb9c7f1cd9a8961a1b048e3991ee9a2b05.1729059707.git.tjeznach@rivosinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce device driver for PCIe implementation
of RISC-V IOMMU architected hardware.
IOMMU hardware and system support for MSI or MSI-X is
required by this implementation.
Vendor and device identifiers used in this patch
matches QEMU implementation of the RISC-V IOMMU PCIe
device, from Rivos VID (0x1efd) range allocated by the PCI-SIG.
MAINTAINERS | added iommu-pci.c already covered by matching pattern.
Link: https://lore.kernel.org/qemu-devel/20240307160319.675044-1-dbarboza@ventanamicro.com/
Co-developed-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/12f3bdbe519ebb7ca482191e7334d38b25b8ae8f.1729059707.git.tjeznach@rivosinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce platform device driver for implementation of RISC-V IOMMU
architected hardware.
Hardware interface definition located in file iommu-bits.h is based on
ratified RISC-V IOMMU Architecture Specification version 1.0.0.
This patch implements platform device initialization, early check and
configuration of the IOMMU interfaces and enables global pass-through
address translation mode (iommu_mode == BARE), without registering
hardware instance in the IOMMU subsystem.
Link: https://github.com/riscv-non-isa/riscv-iommu
Co-developed-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Co-developed-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Sebastien Boeuf <seb@rivosinc.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/2f2e4530c0ee4a81385efa90f1da932f5179f3fb.1729059707.git.tjeznach@rivosinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
