We have recently seen report of lockdep circular lock dependency warnings
on platforms like Skylake and Kabylake:
======================================================
WARNING: possible circular locking dependency detected
6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3},
at: iommu_probe_device+0x1d/0x70
but task is already holding lock:
ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3},
at: intel_iommu_init+0xe75/0x11f0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&device->physical_node_lock){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
intel_iommu_init+0xe75/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #5 (dmar_global_lock){++++}-{3:3}:
down_read+0x43/0x1d0
enable_drhd_fault_handling+0x21/0x110
cpuhp_invoke_callback+0x4c6/0x870
cpuhp_issue_call+0xbf/0x1f0
__cpuhp_setup_state_cpuslocked+0x111/0x320
__cpuhp_setup_state+0xb0/0x220
irq_remap_enable_fault_handling+0x3f/0xa0
apic_intr_mode_init+0x5c/0x110
x86_late_time_init+0x24/0x40
start_kernel+0x895/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #4 (cpuhp_state_mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__cpuhp_setup_state_cpuslocked+0x67/0x320
__cpuhp_setup_state+0xb0/0x220
page_alloc_init_cpuhp+0x2d/0x60
mm_core_init+0x18/0x2c0
start_kernel+0x576/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #3 (cpu_hotplug_lock){++++}-{0:0}:
__cpuhp_state_add_instance+0x4f/0x220
iova_domain_init_rcaches+0x214/0x280
iommu_setup_dma_ops+0x1a4/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_setup_dma_ops+0x16b/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #1 (&group->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__iommu_probe_device+0x24c/0x4e0
probe_iommu_group+0x2b/0x50
bus_for_each_dev+0x7d/0xe0
iommu_device_register+0xe1/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #0 (iommu_probe_device_lock){+.+.}-{3:3}:
__lock_acquire+0x1637/0x2810
lock_acquire+0xc9/0x300
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_probe_device+0x1d/0x70
intel_iommu_init+0xe90/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
iommu_probe_device_lock --> dmar_global_lock -->
&device->physical_node_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&device->physical_node_lock);
lock(dmar_global_lock);
lock(&device->physical_node_lock);
lock(iommu_probe_device_lock);
*** DEADLOCK ***
This driver uses a global lock to protect the list of enumerated DMA
remapping units. It is necessary due to the driver's support for dynamic
addition and removal of remapping units at runtime.
Two distinct code paths require iteration over this remapping unit list:
- Device registration and probing: the driver iterates the list to
register each remapping unit with the upper layer IOMMU framework
and subsequently probe the devices managed by that unit.
- Global configuration: Upper layer components may also iterate the list
to apply configuration changes.
The lock acquisition order between these two code paths was reversed. This
caused lockdep warnings, indicating a risk of deadlock. Fix this warning
by releasing the global lock before invoking upper layer interfaces for
device registration.
Fixes: b150654f74 ("iommu/vt-d: Fix suspicious RCU usage")
Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Don't overwrite an IRTE that is posting IRQs to a vCPU with a posted MSI
entry if the host IRQ affinity happens to change. If/when the IRTE is
reverted back to "host mode", it will be reconfigured as a posted MSI or
remapped entry as appropriate.
Drop the "mode" field, which doesn't differentiate between posted MSIs and
posted vCPUs, in favor of a dedicated posted_vcpu flag. Note! The two
posted_{msi,vcpu} flags are intentionally not mutually exclusive; an IRTE
can transition between posted MSI and posted vCPU.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-3-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a helper to take care of reconfiguring an IRTE to deliver IRQs to the
host, i.e. not to a vCPU, and use the helper when an IRTE's vCPU affinity
is nullified, i.e. when KVM puts an IRTE back into "host" mode. Because
posted MSIs use an ephemeral IRTE, using modify_irte() puts the IRTE into
full remapped mode, i.e. unintentionally disables posted MSIs on the IRQ.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-2-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The intel_context_flush_present() is called in places where either the
scalable mode is disabled, or scalable mode is enabled but all PASID
entries are known to be non-present. In these cases, the flush_domains
path within intel_context_flush_present() will never execute. This dead
code is therefore removed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250228092631.3425464-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update PRI enablement to use the new method, similar to the amd iommu
driver. Enable PRI in the device probe path and disable it when the device
is released. PRI is enabled throughout the device's iommu lifecycle. The
infrastructure for the iommu subsystem to handle iopf requests is created
during iopf enablement and released during iopf disablement. All invalid
page requests from the device are automatically handled by the iommu
subsystem if iopf is not enabled. Add iopf_refcount to track the iopf
enablement.
Convert the return type of intel_iommu_disable_iopf() to void, as there
is no way to handle a failure when disabling this feature. Make
intel_iommu_enable/disable_iopf() helpers global, as they will be used
beyond the current file in the subsequent patch.
The iopf_refcount is not protected by any lock. This is acceptable, as
there is no concurrent access to it in the current code. The following
patch will address this by moving it to the domain attach/detach paths,
which are protected by the iommu group mutex.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250228092631.3425464-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Device ATS is currently enabled when a domain is attached to the device
and disabled when the domain is detached. This creates a limitation:
when the IOMMU is operating in scalable mode and IOPF is enabled, the
device's domain cannot be changed.
The previous code enables ATS when a domain is set to a device's RID and
disables it during RID domain switch. So, if a PASID is set with a
domain requiring PRI, ATS should remain enabled until the domain is
removed. During the PASID domain's lifecycle, if the RID's domain
changes, PRI will be disrupted because it depends on ATS, which is
disabled when the blocking domain is set for the device's RID.
Remove this limitation by moving ATS enablement to the device probe path.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250228092631.3425464-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Attach of a SVA domain should fail if SVA is not supported, move the check
for SVA support out of IOMMU_DEV_FEAT_SVA and into attach.
Also check when allocating a SVA domain to match other drivers.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250228092631.3425464-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If all the inlines are unwound virt_to_dma_pfn() is simply:
return page_to_pfn(virt_to_page(p)) << (PAGE_SHIFT - VTD_PAGE_SHIFT);
Which can be re-arranged to:
(page_to_pfn(virt_to_page(p)) << PAGE_SHIFT) >> VTD_PAGE_SHIFT
The only caller is:
((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT)
re-arranged to:
((page_to_pfn(virt_to_page(tmp_page)) << PAGE_SHIFT) >> VTD_PAGE_SHIFT)
<< VTD_PAGE_SHIFT
Which simplifies to:
page_to_pfn(virt_to_page(tmp_page)) << PAGE_SHIFT
That is the same as virt_to_phys(tmp_page), so just remove all of this.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-e797f4dc6918+93057-iommu_pages_jgg@nvidia.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We found that executing the command ./a.out &;reboot -f (where a.out is a
program that only executes a while(1) infinite loop) can probabilistically
cause the system to hang in the intel_iommu_shutdown() function, rendering
it unresponsive. Through analysis, we identified that the factors
contributing to this issue are as follows:
1. The reboot -f command does not prompt the kernel to notify the
application layer to perform cleanup actions, allowing the application to
continue running.
2. When the kernel reaches the intel_iommu_shutdown() function, only the
BSP (Bootstrap Processor) CPU is operational in the system.
3. During the execution of intel_iommu_shutdown(), the function down_write
(&dmar_global_lock) causes the process to sleep and be scheduled out.
4. At this point, though the processor's interrupt flag is not cleared,
allowing interrupts to be accepted. However, only legacy devices and NMI
(Non-Maskable Interrupt) interrupts could come in, as other interrupts
routing have already been disabled. If no legacy or NMI interrupts occur
at this stage, the scheduler will not be able to run.
5. If the application got scheduled at this time is executing a while(1)-
type loop, it will be unable to be preempted, leading to an infinite loop
and causing the system to become unresponsive.
To resolve this issue, the intel_iommu_shutdown() function should not
execute down_write(), which can potentially cause the process to be
scheduled out. Furthermore, since only the BSP is running during the later
stages of the reboot, there is no need for protection against parallel
access to the DMAR (DMA Remapping) unit. Therefore, the following lines
could be removed:
down_write(&dmar_global_lock);
up_write(&dmar_global_lock);
After testing, the issue has been resolved.
Fixes: 6c3a44ed3c ("iommu/vt-d: Turn off translations at shutdown")
Co-developed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20250303062421.17929-1-cuiyunhui@bytedance.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This driver supports page faults on PCI RID since commit <9f831c16c69e>
("iommu/vt-d: Remove the pasid present check in prq_event_thread") by
allowing the reporting of page faults with the pasid_present field cleared
to the upper layer for further handling. The fundamental assumption here
is that the detach or replace operations act as a fence for page faults.
This implies that all pending page faults associated with a specific RID
or PASID are flushed when a domain is detached or replaced from a device
RID or PASID.
However, the intel_iommu_drain_pasid_prq() helper does not correctly
handle faults for RID. This leads to faults potentially remaining pending
in the iommu hardware queue even after the domain is detached, thereby
violating the aforementioned assumption.
Fix this issue by extending intel_iommu_drain_pasid_prq() to cover faults
for RID.
Fixes: 9f831c16c6 ("iommu/vt-d: Remove the pasid present check in prq_event_thread")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250121023150.815972-1-baolu.lu@linux.intel.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20250211005512.985563-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No major functionality this cycle:
- iommufd part of the domain_alloc_paging_flags() conversion
- Move IOMMU_HWPT_FAULT_ID_VALID processing out of drivers
- Increase a timeout waiting for other threads to drop transient refcounts
that syzkaller was hitting
- Fix a UBSAN hit in iova_bitmap due to shift out of bounds
- Add missing cleanup of fault events during FD shutdown, fixing a memory leak
- Improve the fault delivery flow to have a smaller locking critical
region that does not include copy_to_user()
- Fix 32 bit ABI breakage due to missed implicit padding, and fix the
stack memory leakage
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ5JgnAAKCRCFwuHvBreF
YQWrAP9ItOsbeOxYIEVQK1E90HbMWVHF8RhWDPnpChgzyorjjQEA/OOou6uTAcVC
fJybLk3T7JrutMmBFvVLsRg+yCJPlgE=
=ldhT
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"No major functionality this cycle:
- iommufd part of the domain_alloc_paging_flags() conversion
- Move IOMMU_HWPT_FAULT_ID_VALID processing out of drivers
- Increase a timeout waiting for other threads to drop transient
refcounts that syzkaller was hitting
- Fix a UBSAN hit in iova_bitmap due to shift out of bounds
- Add missing cleanup of fault events during FD shutdown, fixing a
memory leak
- Improve the fault delivery flow to have a smaller locking critical
region that does not include copy_to_user()
- Fix 32 bit ABI breakage due to missed implicit padding, and fix the
stack memory leakage"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix struct iommu_hwpt_pgfault init and padding
iommufd/fault: Use a separate spinlock to protect fault->deliver list
iommufd/fault: Destroy response and mutex in iommufd_fault_destroy()
iommufd: Keep OBJ/IOCTL lists in an alphabetical order
iommufd/iova_bitmap: Fix shift-out-of-bounds in iova_bitmap_offset_to_index()
iommu: iommufd: fix WARNING in iommufd_device_unbind
iommufd: Deal with IOMMU_HWPT_FAULT_ID_VALID in iommufd core
iommufd/selftest: Remove domain_alloc_paging()
Including:
- Core changes:
- PASID support for the blocked_domain.
- ARM-SMMU Updates:
- SMMUv2:
* Implement per-client prefetcher configuration on Qualcomm SoCs.
* Support for the Adreno SMMU on Qualcomm's SDM670 SOC.
- SMMUv3:
* Pretty-printing of event records.
* Drop the ->domain_alloc_paging implementation in favour of
->domain_alloc_paging_flags(flags==0).
- IO-PGTable:
* Generalisation of the page-table walker to enable external walkers
(e.g. for debugging unexpected page-faults from the GPU).
* Minor fix for handling concatenated PGDs at stage-2 with 16KiB pages.
- Misc:
* Clean-up device probing and replace the crufty probe-deferral hack
with a more robust implementation of arm_smmu_get_by_fwnode().
* Device-tree binding updates for a bunch of Qualcomm platforms.
- Intel VT-d Updates:
- Remove domain_alloc_paging().
- Remove capability audit code.
- Draining PRQ in sva unbind path when FPD bit set.
- Link cache tags of same iommu unit together.
- AMD-Vi Updates:
- Use CMPXCHG128 to update DTE.
- Cleanups of the domain_alloc_paging() path.
- RiscV IOMMU:
- Platform MSI support.
- Shutdown support.
- Rockchip IOMMU:
- Add DT bindings for Rockchip RK3576.
- More smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmeQsnQACgkQK/BELZcB
GuOHug/8DDIuKlUHU2+3U2kKxMb8o1kDxGPkfKgXBaxxpprvY9DARRv7N4mnF6Vu
Db8P7QihXfQKnZHXEiqHE7TlA5B+IVQd3Kz96P4sY3OlVWGZYqyKv2GEHyG5CjN/
bay7bfgeo2EVEiAio6VToFFWTm+oxFZzhoYFIlAyZAuIQUp17gHXf7YyhUwk4rOz
8g0XMH6uldidID6BVpArxHh/bN9MOTdHzkyhwPF3FL8E94ziX6rWILH9ADYxBn2o
wqHR1STxv398k62toPpWb78c2RdANI8treDXsYpCyDF87dygdP+SA0qkK3G6kAVA
/IiPothAj6oNm+Gvwd04tEkuqVVrVqrmWE3VXSps33Tk+apYtcmLCtdpwY/F93D1
EZwTVqveBKk2hSWYVDlEyj9XKmZ9dYWDGvg2Fx844gltQHoHtEgYL+azCMU/ry7k
3+KlkUqFZZxUDbVBbbDdMF+NpxyZTtfKsaLB8f5laOP1R8Os3+dC69Gw6bhoxaMc
xfL3v245V5kWSRy+w02TyZGmZSzRx0FKUbFLKpLOvZD6pfx8t8oqJTG9FwN1KzpL
lvcBpPB5AUeNJQpKcVSjs/ne8WiOqdABt7ge4E9J5TwrDI8sXk0mwJaPrlDgK1V/
0xkkLmxWnqsu04CyDay+Uv3Bls/rRBpikR/iGt9P3BbZs7Cyryw=
=Xei0
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- PASID support for the blocked_domain
ARM-SMMU Updates:
- SMMUv2:
- Implement per-client prefetcher configuration on Qualcomm SoCs
- Support for the Adreno SMMU on Qualcomm's SDM670 SOC
- SMMUv3:
- Pretty-printing of event records
- Drop the ->domain_alloc_paging implementation in favour of
domain_alloc_paging_flags(flags==0)
- IO-PGTable:
- Generalisation of the page-table walker to enable external
walkers (e.g. for debugging unexpected page-faults from the GPU)
- Minor fix for handling concatenated PGDs at stage-2 with 16KiB
pages
- Misc:
- Clean-up device probing and replace the crufty probe-deferral
hack with a more robust implementation of
arm_smmu_get_by_fwnode()
- Device-tree binding updates for a bunch of Qualcomm platforms
Intel VT-d Updates:
- Remove domain_alloc_paging()
- Remove capability audit code
- Draining PRQ in sva unbind path when FPD bit set
- Link cache tags of same iommu unit together
AMD-Vi Updates:
- Use CMPXCHG128 to update DTE
- Cleanups of the domain_alloc_paging() path
RiscV IOMMU:
- Platform MSI support
- Shutdown support
Rockchip IOMMU:
- Add DT bindings for Rockchip RK3576
More smaller fixes and cleanups"
* tag 'iommu-updates-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu: Use str_enable_disable-like helpers
iommu/amd: Fully decode all combinations of alloc_paging_flags
iommu/amd: Move the nid to pdom_setup_pgtable()
iommu/amd: Change amd_iommu_pgtable to use enum protection_domain_mode
iommu/amd: Remove type argument from do_iommu_domain_alloc() and related
iommu/amd: Remove dev == NULL checks
iommu/amd: Remove domain_alloc()
iommu/amd: Remove unused amd_iommu_domain_update()
iommu/riscv: Fixup compile warning
iommu/arm-smmu-v3: Add missing #include of linux/string_choices.h
iommu/arm-smmu-v3: Use str_read_write helper w/ logs
iommu/io-pgtable-arm: Add way to debug pgtable walk
iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys
iommu/io-pgtable-arm: Make pgtable walker more generic
iommu/arm-smmu: Add ACTLR data and support for qcom_smmu_500
iommu/arm-smmu: Introduce ACTLR custom prefetcher settings
iommu/arm-smmu: Add support for PRR bit setup
iommu/arm-smmu: Refactor qcom_smmu structure to include single pointer
iommu/arm-smmu: Re-enable context caching in smmu reset operation
iommu/vt-d: Link cache tags of same iommu unit together
...
- Consolidation of the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting. Some
interrupt chips require that affinity changes are made from the context
of handling an interrupt to avoid certain race conditions. For x86 this
was the default, but with interrupt remapping this requirement was
lifted and a flag was introduced which tells the core code that
affinity changes can be done in any context. Unrestricted affinity
changes are the default for the majority of interrupt chips. RISCV has
the requirement to add the deferred mode to one of it's interrupt
controllers, but with the original implementation this would require to
add the any context flag to all other RISC-V interrupt chips. That's
backwards, so reverse the logic and require that chips, which need the
deferred mode have to be marked accordingly. That avoids chasing the
'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=q4rj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
Cache tag invalidation requests for a domain are accumulated until a
different iommu unit is found when traversing the cache_tags linked list.
But cache tags of same iommu unit can be distributed in the linked list,
this make batched flush less efficient. E.g., one device backed by iommu0
is attached to a domain in between two devices attaching backed by iommu1.
Group cache tags together for same iommu unit in cache_tag_assign() to
maximize the performance of batched flush.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241219054358.8654-1-zhenzhong.duan@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a device uses a PASID for SVA (Shared Virtual Address), it's possible
that the PASID entry is marked as non-present and FPD bit set before the
device flushes all ongoing DMA requests and removes the SVA domain. This
can occur when an exception happens and the process terminates before the
device driver stops DMA and calls the iommu driver to unbind the PASID.
There's no need to drain the PRQ in the mm release path. Instead, the PRQ
will be drained in the SVA unbind path. But in such case,
intel_pasid_tear_down_entry() only checks the presence of the pasid entry
and returns directly.
Add the code to clear the FPD bit and drain the PRQ.
Fixes: c43e1ccdeb ("iommu/vt-d: Drain PRQs when domain removed from RID")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241217024240.139615-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The capability audit code was introduced by commit <ad3d19029979>
"iommu/vt-d: Audit IOMMU Capabilities and add helper functions", aiming
to verify the consistency of capabilities across all IOMMUs for supported
features.
Nowadays, all the kAPIs of the iommu subsystem have evolved to be device
oriented, in preparation for supporting heterogeneous IOMMU architectures.
There is no longer a need to require capability consistence among IOMMUs
for any feature.
Remove the iommu cap audit code to make the driver align with the design
in the iommu core.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241216071828.22962-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is duplicated by intel_iommu_domain_alloc_paging_flags(), just remove
it.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-b101d00c5ee5+17645-vtd_paging_flags_jgg@nvidia.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer.
Signed-off-by: Kees Bakker <kees@ijzerbout.nl>
Link: https://lore.kernel.org/r/20241218201048.E544818E57E@bout3.ijzerbout.nl
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The blocked domain can be extended to park PASID of a device to be the
DMA blocking state. By this the remove_dev_pasid() op is dropped.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241204122928.11987-6-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a PASID is used for SVA by a device, it's possible that the PASID
entry is cleared before the device flushes all ongoing DMA requests and
removes the SVA domain. This can occur when an exception happens and the
process terminates before the device driver stops DMA and calls the
iommu driver to unbind the PASID.
There's no need to drain the PRQ in the mm release path. Instead, the PRQ
will be drained in the SVA unbind path.
Unfortunately, commit c43e1ccdeb ("iommu/vt-d: Drain PRQs when domain
removed from RID") changed this behavior by unconditionally draining the
PRQ in intel_pasid_tear_down_entry(). This can lead to a potential
sleeping-in-atomic-context issue.
Smatch static checker warning:
drivers/iommu/intel/prq.c:95 intel_iommu_drain_pasid_prq()
warn: sleeping in atomic context
To avoid this issue, prevent draining the PRQ in the SVA mm release path
and restore the previous behavior.
Fixes: c43e1ccdeb ("iommu/vt-d: Drain PRQs when domain removed from RID")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-iommu/c5187676-2fa2-4e29-94e0-4a279dc88b49@stanley.mountain/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241212021529.1104745-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The qi_batch is allocated when assigning cache tag for a domain. While
for nested parent domain, it is missed. Hence, when trying to map pages
to the nested parent, NULL dereference occurred. Also, there is potential
memleak since there is no lock around domain->qi_batch allocation.
To solve it, add a helper for qi_batch allocation, and call it in both
the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain().
BUG: kernel NULL pointer dereference, address: 0000000000000200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8104795067 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632
Call Trace:
? __die+0x24/0x70
? page_fault_oops+0x80/0x150
? do_user_addr_fault+0x63/0x7b0
? exc_page_fault+0x7c/0x220
? asm_exc_page_fault+0x26/0x30
? cache_tag_flush_range_np+0x13c/0x260
intel_iommu_iotlb_sync_map+0x1a/0x30
iommu_map+0x61/0xf0
batch_to_domain+0x188/0x250
iopt_area_fill_domains+0x125/0x320
? rcu_is_watching+0x11/0x50
iopt_map_pages+0x63/0x100
iopt_map_common.isra.0+0xa7/0x190
iopt_map_user_pages+0x6a/0x80
iommufd_ioas_map+0xcd/0x1d0
iommufd_fops_ioctl+0x118/0x1c0
__x64_sys_ioctl+0x93/0xc0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 705c1cdf1e ("iommu/vt-d: Introduce batched cache invalidation")
Cc: stable@vger.kernel.org
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241210130322.17175-1-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current implementation removes cache tags after disabling ATS,
leading to potential memory leaks and kernel crashes. Specifically,
CACHE_TAG_DEVTLB type cache tags may still remain in the list even
after the domain is freed, causing a use-after-free condition.
This issue really shows up when multiple VFs from different PFs
passed through to a single user-space process via vfio-pci. In such
cases, the kernel may crash with kernel messages like:
BUG: kernel NULL pointer dereference, address: 0000000000000014
PGD 19036a067 P4D 1940a3067 PUD 136c9b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 74 UID: 0 PID: 3183 Comm: testCli Not tainted 6.11.9 #2
RIP: 0010:cache_tag_flush_range+0x9b/0x250
Call Trace:
<TASK>
? __die+0x1f/0x60
? page_fault_oops+0x163/0x590
? exc_page_fault+0x72/0x190
? asm_exc_page_fault+0x22/0x30
? cache_tag_flush_range+0x9b/0x250
? cache_tag_flush_range+0x5d/0x250
intel_iommu_tlb_sync+0x29/0x40
intel_iommu_unmap_pages+0xfe/0x160
__iommu_unmap+0xd8/0x1a0
vfio_unmap_unpin+0x182/0x340 [vfio_iommu_type1]
vfio_remove_dma+0x2a/0xb0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xafa/0x18e0 [vfio_iommu_type1]
Move cache_tag_unassign_domain() before iommu_disable_pci_caps() to fix
it.
Fixes: 3b1d9e2b2d ("iommu/vt-d: Add cache tag assignment interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241129020506.576413-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU_HWPT_FAULT_ID_VALID is used to mark if the fault_id field of
iommu_hwp_alloc is valid or not. As the fault_id field is handled in
the iommufd core, so it makes sense to sanitize the
IOMMU_HWPT_FAULT_ID_VALID flag in the iommufd core, and mask it out
before passing the user flags to the iommu drivers.
Link: https://patch.msgid.link/r/20241207120108.5640-1-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the main domain allocating path is calling this function it
doesn't make sense to leave it named _user. Change the name to
alloc_paging_flags() to mirror the new iommu_paging_domain_alloc_flags()
function.
A driver should implement only one of ops->domain_alloc_paging() or
ops->domain_alloc_paging_flags(). The former is a simpler interface with
less boiler plate that the majority of drivers use. The latter is for
drivers with a greater feature set (PASID, multiple page table support,
advanced iommufd support, nesting, etc). Additional patches will be needed
to achieve this.
Link: https://patch.msgid.link/r/2-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It turns out all the drivers that are using this immediately call into
another function, so just make that function directly into the op. This
makes paging=NULL for domain_alloc_user and we can remove the argument in
the next patch.
The function mirrors the similar op in the viommu that allocates a nested
domain on top of the viommu's nesting parent. This version supports cases
where a viommu is not being used.
Link: https://patch.msgid.link/r/1-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add intel_nested_set_dev_pasid() to set a nested type domain to a PASID
of a device.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-12-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Let identity_domain_set_dev_pasid() call the pasid replace helpers hence
be able to do domain replacement.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-11-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
intel_iommu_set_dev_pasid() is only supposed to be used by paging domain,
so limit it.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-9-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Let intel_iommu_set_dev_pasid() call the pasid replace helpers hence be
able to do domain replacement.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-8-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
domain_id_iommu() does not support SVA type and identity type domains.
Add iommu_domain_did() to support all domain types.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-7-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The domain_add_dev_pasid() and domain_remove_dev_pasid() are added to
consolidate the adding/removing of the struct dev_pasid_info. Besides,
it includes the cache tag assign/unassign as well.
This also prepares for adding domain replacement for pasid. The
set_dev_pasid callbacks need to deal with the dev_pasid_info for both old
and new domain. These two helpers make the life easier.
intel_iommu_set_dev_pasid() and intel_svm_set_dev_pasid() are updated to
use the helpers.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-6-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
pasid replacement allows converting a present pasid entry to be FS, SS,
PT or nested, hence add helpers for such operations.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-5-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is clearer to have a new set of pasid replacement helpers other than
extending the existing ones to cover both initial setup and replacement.
Then abstract out the common code for manipulating the pasid entry as
preparation.
No functional change is intended.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-4-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Generalize the logic for flushing pasid-related cache upon changes to
bits other than SSADE and P which requires a different flow according
to VT-d spec.
No functional change is intended.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-3-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support domain replacement for pasid, the underlying iommu driver needs
to know the old domain hence be able to clean up the existing attachment.
It would be much convenient for iommu layer to pass down the old domain.
Otherwise, iommu drivers would need to track domain for pasids by
themselves, this would duplicate code among the iommu drivers. Or iommu
drivers would rely group->pasid_array to get domain, which may not always
the correct one.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As this iommu driver now supports page faults for requests without
PASID, page requests should be drained when a domain is removed from
the RID2PASID entry.
This results in the intel_iommu_drain_pasid_prq() call being moved to
intel_pasid_tear_down_entry(). This indicates that when a translation
is removed from any PASID entry and the PRI has been enabled on the
device, page requests are drained in the domain detachment path.
The intel_iommu_drain_pasid_prq() helper has been modified to support
sending device TLB invalidation requests for both PASID and non-PASID
cases.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241101045543.70086-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID support within the IOMMU is not required to enable the Page
Request Queue, only the PRS capability.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-5-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add IOMMU_HWPT_FAULT_ID_VALID as part of the valid flags when doing an
iommufd_hwpt_alloc allowing the use of an iommu fault allocation
(iommu_fault_alloc) with the IOMMU_HWPT_ALLOC ioctl.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-4-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move IOMMU_IOPF from under INTEL_IOMMU_SVM into INTEL_IOMMU. This
certifies that the core intel iommu utilizes the IOPF library
functions, independent of the INTEL_IOMMU_SVM config.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-3-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID is not strictly needed when handling a PRQ event; remove the check
for the pasid present bit in the request. This change was not included
in the creation of prq.c to emphasize the change in capability checks
when handing PRQ events.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-2-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IO page faults are no longer dependent on CONFIG_INTEL_IOMMU_SVM. Move
all Page Request Queue (PRQ) functions that handle prq events to a new
file in drivers/iommu/intel/prq.c. The page_req_des struct is now
declared in drivers/iommu/intel/prq.c.
No functional changes are intended. This is a preparation patch to
enable the use of IO page faults outside the SVM/PASID use cases.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20241015-jag-iopfv8-v4-1-b696ca89ba29@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some issues in pgtable_walk():
1. Super page is dumped as non-present page
2. dma_pte_superpage() should not check against leaf page table entries
3. Pointer pte is never NULL so checking it is meaningless
4. When an entry is not present, it still makes sense to dump the entry
content.
Fix 1,2 by checking dma_pte_superpage()'s returned value after level check.
Fix 3 by removing pte check.
Fix 4 by checking present bit after printing.
By this chance, change to print "page table not present" instead of "PTE
not present" to be clearer.
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-3-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some issues in dmar_fault_dump_ptes():
1. return value of phys_to_virt() is used for checking if an entry is
present.
2. dump is confusing, e.g., "pasid table entry is not present", confusing
by unpresent pasid table vs. unpresent pasid table entry. Current code
means the former.
3. pgtable_walk() is called without checking if page table is present.
Fix 1 by checking present bit of an entry before dump a lower level entry.
Fix 2 by removing "entry" string, e.g., "pasid table is not present".
Fix 3 by checking page table present before walk.
Take issue 3 for example, before fix:
[ 442.240357] DMAR: pasid dir entry: 0x000000012c83e001
[ 442.246661] DMAR: pasid table entry[0]: 0x0000000000000000
[ 442.253429] DMAR: pasid table entry[1]: 0x0000000000000000
[ 442.260203] DMAR: pasid table entry[2]: 0x0000000000000000
[ 442.266969] DMAR: pasid table entry[3]: 0x0000000000000000
[ 442.273733] DMAR: pasid table entry[4]: 0x0000000000000000
[ 442.280479] DMAR: pasid table entry[5]: 0x0000000000000000
[ 442.287234] DMAR: pasid table entry[6]: 0x0000000000000000
[ 442.293989] DMAR: pasid table entry[7]: 0x0000000000000000
[ 442.300742] DMAR: PTE not present at level 2
After fix:
...
[ 357.241214] DMAR: pasid table entry[6]: 0x0000000000000000
[ 357.248022] DMAR: pasid table entry[7]: 0x0000000000000000
[ 357.254824] DMAR: scalable mode page table is not present
Fixes: 914ff7719e ("iommu/vt-d: Dump DMAR translation structure when DMA fault occurs")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241024092146.715063-2-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dmar_domian has stored the s1_cfg which includes the s1_pgtbl info, so
no need to store s1_pgtbl, hence drop it.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241025143339.2328991-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dmar_msi_read() has been unused since 2022 in
commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture")
Remove it.
(dmar_msi_write still exists and is used once).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241022002702.302728-1-linux@treblig.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GCC is not happy with the current code, e.g.:
.../iommu/intel/dmar.c:1063:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 13
1063 | sprintf(iommu->name, "dmar%d", iommu->seq_id);
When `make W=1` is supplied, this prevents kernel building. Fix it by
increasing the buffer size for device name and use sizeoF() instead of
hard coded constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241014104529.4025937-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The macro PCI_DEVID() can be used instead of compose it manually.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240829021011.4135618-1-ruanjinjie@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The domain_alloc_user ops should always allocate a guest-compatible page
table unless specific allocation flags are specified.
Currently, IOMMU_HWPT_ALLOC_NEST_PARENT and IOMMU_HWPT_ALLOC_DIRTY_TRACKING
require special handling, as both require hardware support for scalable
mode and second-stage translation. In such cases, the driver should select
a second-stage page table for the paging domain.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The first stage page table is compatible across host and guest kernels.
Therefore, this driver uses the first stage page table as the default for
paging domains.
The helper first_level_by_default() determines the feasibility of using
the first stage page table based on a global policy. This policy requires
consistency in scalable mode and first stage translation capability among
all iommu units. However, this is unnecessary as domain allocation,
attachment, and removal operations are performed on a per-device basis.
The domain type (IOMMU_DOMAIN_DMA vs. IOMMU_DOMAIN_UNMANAGED) should not
be a factor in determining the first stage page table usage. Both types
are for paging domains, and there's no fundamental difference between them.
The driver should not be aware of this distinction unless the core
specifies allocation flags that require special handling.
Convert first_level_by_default() from global to per-iommu and remove the
'type' input.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The requirement for consistent super page support across all the IOMMU
hardware in the system has been removed. In the past, if a new IOMMU
was hot-added and lacked consistent super page capability, the hot-add
process would be aborted. However, with the updated attachment semantics,
it is now permissible for the super page capability to vary among
different IOMMU hardware units.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The attributes of a paging domain are initialized during the allocation
process, and any attempt to attach a domain that is not compatible will
result in a failure. Therefore, there is no need to update the domain
attributes at the time of domain attachment.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The driver now supports domain_alloc_paging, ensuring that a valid device
pointer is provided whenever a paging domain is allocated. Additionally,
the dmar_domain attributes are set up at the time of allocation.
Consistent with the established semantics in the IOMMU core, if a domain is
attached to a device and found to be incompatible with the IOMMU hardware
capabilities, the operation will return an -EINVAL error. This implicitly
advises the caller to allocate a new domain for the device and attempt the
domain attachment again.
Rename prepare_domain_attach_device() to a more meaningful name.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With domain_alloc_paging callback supported, the legacy domain_alloc
callback will never be used anymore. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add the domain_alloc_paging callback for domain allocation using the
iommu_paging_domain_alloc() interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
- Implement per-PMU context rescheduling to significantly improve single-PMU
performance, and related cleanups/fixes. (by Peter Zijlstra and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped erroneously
at higher sampling frequencies. (by Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s (million uprobe
triggerings per second) up to about 8 M/s. For uretprobes it's a bit more
modest with bump from 2.4 M/s to 5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes increases further from
8 M/s to 10.3 M/s (+28%!), and for uretprobes from 5.3 M/s to 5.8 M/s (+11%),
as we have more work to do on uretprobes side.
Even single-thread (no contention) performance is slightly better: 3.276 M/s to
3.396 M/s (+3.5%) for uprobes, and 2.055 M/s to 2.174 M/s (+5.8%)
for uretprobes."
(by Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote(). (by Oleg Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(by Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ with
inheritance, enabling sample based profiling of a group of counters over
a hierarchy of processes or threads. (by Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(by Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(by Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race. (by Adrian Hunter)
- Misc fixes and cleanups. (by James Clark, Jiri Olsa, Oleg Nesterov and Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E3s3
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
Including:
- Core changes:
- Allow ATS on VF when parent device is identity mapped.
- Optimize unmap path on ARM io-pagetable implementation.
- Use of_property_present().
- ARM-SMMU changes:
- SMMUv2:
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- Extend workarounds for broken Qualcomm hypervisor to avoid
touching features that are not available (e.g. 16KiB page
support, reserved context banks).
- SMMUv3:
- Support for NVIDIA's custom virtual command queue hardware.
- Fix Stage-2 stall configuration and extend tests to cover this
area.
- A bunch of driver cleanups, including simplification of the
master rbtree code.
- Plus minor cleanups and fixes across both drivers.
- Intel VT-d changes:
- Retire si_domain and convert to use static identity domain.
- Batched IOTLB/dev-IOTLB invalidation.
- Small code refactoring and cleanups.
- AMD-Vi changes:
- Cleanup and refactoring of io-pagetable code.
- Add parameter to limit the used io-pagesizes.
- Other cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=1QvI
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Allow ATS on VF when parent device is identity mapped
- Optimize unmap path on ARM io-pagetable implementation
- Use of_property_present()
ARM-SMMU changes:
- SMMUv2:
- Devicetree binding updates for Qualcomm MMU-500 implementations
- Extend workarounds for broken Qualcomm hypervisor to avoid
touching features that are not available (e.g. 16KiB page
support, reserved context banks)
- SMMUv3:
- Support for NVIDIA's custom virtual command queue hardware
- Fix Stage-2 stall configuration and extend tests to cover this
area
- A bunch of driver cleanups, including simplification of the
master rbtree code
- Minor cleanups and fixes across both drivers
Intel VT-d changes:
- Retire si_domain and convert to use static identity domain
- Batched IOTLB/dev-IOTLB invalidation
- Small code refactoring and cleanups
AMD-Vi changes:
- Cleanup and refactoring of io-pagetable code
- Add parameter to limit the used io-pagesizes
- Other cleanups and fixes"
* tag 'iommu-updates-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (77 commits)
dt-bindings: arm-smmu: Add compatible for QCS8300 SoC
iommu/amd: Test for PAGING domains before freeing a domain
iommu/amd: Fix argument order in amd_iommu_dev_flush_pasid_all()
iommu/amd: Add kernel parameters to limit V1 page-sizes
iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg
iommu/arm-smmu-v3: Add types for each level of the CD table
iommu/arm-smmu-v3: Shrink the cdtab l1_desc array
iommu/arm-smmu-v3: Do not use devm for the cd table allocations
iommu/arm-smmu-v3: Remove strtab_base/cfg
iommu/arm-smmu-v3: Reorganize struct arm_smmu_strtab_cfg
iommu/arm-smmu-v3: Add types for each level of the 2 level stream table
iommu/arm-smmu-v3: Add arm_smmu_strtab_l1/2_idx()
iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660
iommu/arm-smmu-v3: Use the new rb tree helpers
dt-bindings: arm-smmu: document the support on SA8255p
iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent
iommu/tegra241-cmdqv: Drop static at local variable
iommu/tegra241-cmdqv: Fix ioremap() error handling in probe()
iommu/amd: Do not set the D bit on AMD v2 table entries
iommu/amd: Correct the reported page sizes from the V1 table
...
- Handle an allocation failure in the IO/APIC code gracefully instead of
crashing the machine.
- Remove support for APIC local destination mode on 64bit
Logical destination mode of the local APIC is used for systems with up
to 8 CPUs. It has an advantage over physical destination mode as it
allows to target multiple CPUs at once with IPIs. That advantage was
definitely worth it when systems with up to 8 CPUs were state of the
art for servers and workstations, but that's history.
In the recent past there were quite some reports of new laptops failing
to boot with logical destination mode, but they work fine with physical
destination mode. That's not a suprise because physical destination
mode is guaranteed to work as it's the only way to get a CPU up and
running via the INIT/INIT/STARTUP sequence. Some of the affected
systems were cured by BIOS updates, but not all OEMs provide them.
As the number of CPUs keep increasing, logical destination mode becomes
less used and the benefit for small systems, like laptops, is not
really worth the trouble. So just remove logical destination mode
support for 64bit and be done with it.
- Code and comment cleanups in the APIC area.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmbpL0gTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYob/VD/984H4Ku5/Djq9HkhBO11hfRTIVz/uf
1/b5ogd3eN0dK5nAv79/Gj7E/zntVsvCjuCYckXz51xPxkQH2LxUhDKqeUwg5lmz
xQV0mKK4fIS/g5yymQGplKc7FfjRAnVL9ZZRRvMkvtqbr1+dA665XrfjFAPkp929
zLaBUbNC6YxYfSddsV+fE8711QP6NzCYdeEBIdZ3NuBrlGfiLy1g1OWCk8za7zjM
cLJfGnU63MNXI4smrZWrQwJDBOiQl1wPbJYWL216OPHofLzLNGNZFXm4y8OJcyN0
WPWn1TliAwpRYx18Z/cEPgkoES8mXqqpPcoo0yBjOmPLl31J6QYU7QQhDb3HOnM/
ALgnnuhoWll5YjNBPJkONAa7lpnmfTbEg82WxaipEscz9CyEBoeOLvYBGPl/YqV+
B8wMOZHDH+BchJ6rYXDA1AmkD+9q86F+ddbiVOKj09dVm/QeLrGjwox1O7yGALGZ
hZPQx9MsTOJqQIh40PsqFko6OiMKuMBIebacFb4NqmVA2/WbRbcmkzRyxk+kkBFv
UMZX5O6sQhat615WZkxTnjmdnXETTIlv4nRQURBd/LF6ECRkXXG11dWaZfTXZ9iW
8NNlHw8mIbGmzn7wWXHlhk7N7vuhWCikAf7V2y+eZUVtE56qGM2volJNCmTZacP2
rrjmltwEGR+5gg==
=Y3a/
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Handle an allocation failure in the IO/APIC code gracefully instead
of crashing the machine.
- Remove support for APIC local destination mode on 64bit
Logical destination mode of the local APIC is used for systems with
up to 8 CPUs. It has an advantage over physical destination mode as
it allows to target multiple CPUs at once with IPIs. That advantage
was definitely worth it when systems with up to 8 CPUs were state of
the art for servers and workstations, but that's history.
In the recent past there were quite some reports of new laptops
failing to boot with logical destination mode, but they work fine
with physical destination mode. That's not a suprise because physical
destination mode is guaranteed to work as it's the only way to get a
CPU up and running via the INIT/INIT/STARTUP sequence. Some of the
affected systems were cured by BIOS updates, but not all OEMs provide
them.
As the number of CPUs keep increasing, logical destination mode
becomes less used and the benefit for small systems, like laptops, is
not really worth the trouble. So just remove logical destination mode
support for 64bit and be done with it.
- Code and comment cleanups in the APIC area.
* tag 'x86-apic-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Fix comment on IRQ vector layout
x86/apic: Remove unused extern declarations
x86/apic: Remove logical destination mode for 64-bit
x86/apic: Remove unused inline function apic_set_eoi_cb()
x86/ioapic: Cleanup remaining coding style issues
x86/ioapic: Cleanup line breaks
x86/ioapic: Cleanup bracket usage
x86/ioapic: Cleanup comments
x86/ioapic: Move replace_pin_at_irq_node() to the call site
iommu/vt-d: Cleanup apic_printk()
x86/mpparse: Cleanup apic_printk()s
x86/ioapic: Cleanup guarded debug printk()s
x86/ioapic: Cleanup apic_printk()s
x86/apic: Cleanup apic_printk()s
x86/apic: Provide apic_printk() helpers
x86/ioapic: Use guard() for locking where applicable
x86/ioapic: Cleanup structs
x86/ioapic: Mark mp_alloc_timer_irq() __init
x86/ioapic: Handle allocation failures gracefully
The iommu PMU is system-wide scope, which is supported by the generic
perf_event subsystem now.
Set the scope for the iommu PMU and remove all the cpumask and hotplug
codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240802151643.1691631-5-kan.liang@linux.intel.com
Converts IOTLB and Dev-IOTLB invalidation to a batched model. Cache tag
invalidation requests for a domain are now accumulated in a qi_batch
structure before being flushed in bulk. It replaces the previous per-
request qi_flush approach with a more efficient batching mechanism.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240815065221.50328-5-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduces a qi_batch structure to hold batched cache invalidation
descriptors on a per-dmar_domain basis. A fixed-size descriptor
array is used for simplicity. The qi_batch is allocated when the
first cache tag is added to the domain and freed during
iommu_free_domain().
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240815065221.50328-4-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extracts IOTLB and Dev-IOTLB invalidation logic from cache tag flush
interfaces into dedicated helper functions. It prepares the codebase
for upcoming changes to support batched cache invalidations.
To enable direct use of qi_flush helpers in the new functions,
iommu->flush.flush_iotlb and quirk_extra_dev_tlb_flush() are opened up.
No functional changes are intended.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240815065221.50328-3-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Separate the logic for constructing IOTLB and device TLB invalidation
descriptors from the qi_flush interfaces. New helpers, qi_desc(), are
introduced to encapsulate this common functionality.
Moving descriptor composition code to new helpers enables its reuse in
the upcoming qi_batch interfaces.
No functional changes are intended.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240815065221.50328-2-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The caching mode of an IOMMU is irrelevant to the behavior of the device
TLB. Previously, commit <304b3bde24b5> ("iommu/vt-d: Remove caching mode
check before device TLB flush") removed this redundant check in the
domain unmap path.
Checking the caching mode before flushing the device TLB after a pasid
table entry is updated is unnecessary and can lead to inconsistent
behavior.
Extends this consistency by removing the caching mode check in the pasid
table update path.
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240820030208.20020-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, PCI PASID is enabled alongside PCI ATS when an iommu domain is
attached to the device and disabled when the device transitions to block
translation mode. This approach is inappropriate as PCI PASID is a device
feature independent of the type of the attached domain.
Enable PCI PASID during the IOMMU device probe and disables it during the
release path.
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240819051805.116936-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If qi_submit_sync() is invoked with 0 invalidation descriptors (for
instance, for DMA draining purposes), we can run into a bug where a
submitting thread fails to detect the completion of invalidation_wait.
Subsequently, this led to a soft lockup. Currently, there is no impact
by this bug on the existing users because no callers are submitting
invalidations with 0 descriptors. This fix will enable future users
(such as DMA drain) calling qi_submit_sync() with 0 count.
Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while
concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both
threads then enter a while loop, waiting for their respective descriptors
to complete. T1 detects its completion (i.e., T1's invalidation_wait status
changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to
reclaim all descriptors, potentially including adjacent ones of other
threads that are also marked as QI_DONE.
During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU
hardware may complete the invalidation for T2, setting its status to
QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's
invalidation_wait descriptor and changes its status to QI_FREE, T2 will
not observe the QI_DONE status for its invalidation_wait and will
indefinitely remain stuck.
This soft lockup does not occur when only non-zero descriptors are
submitted.In such cases, invalidation descriptors are interspersed among
wait descriptors with the status QI_IN_USE, acting as barriers. These
barriers prevent the reclaim code from mistakenly freeing descriptors
belonging to other submitters.
Considered the following example timeline:
T1 T2
========================================
ID1
WD1
while(WD1!=QI_DONE)
unlock
lock
WD1=QI_DONE* WD2
while(WD2!=QI_DONE)
unlock
lock
WD1==QI_DONE?
ID1=QI_DONE WD2=DONE*
reclaim()
ID1=FREE
WD1=FREE
WD2=FREE
unlock
soft lockup! T2 never sees QI_DONE in WD2
Where:
ID = invalidation descriptor
WD = wait descriptor
* Written by hardware
The root of the problem is that the descriptor status QI_DONE flag is used
for two conflicting purposes:
1. signal a descriptor is ready for reclaim (to be freed)
2. signal by the hardware that a wait descriptor is complete
The solution (in this patch) is state separation by using QI_FREE flag
for #1.
Once a thread's invalidation descriptors are complete, their status would
be set to QI_FREE. The reclaim_free_desc() function would then only
free descriptors marked as QI_FREE instead of those marked as
QI_DONE. This change ensures that T2 (from the previous example) will
correctly observe the completion of its invalidation_wait (marked as
QI_DONE).
Signed-off-by: Sanjay K Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240728210059.1964602-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The static identity domain has been introduced, rendering the si_domain
obsolete. Remove si_domain and cleanup the code accordingly.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240809055431.36513-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Software determines VT-d hardware support for passthrough translation by
inspecting the capability register. If passthrough translation is not
supported, the device is instructed to use DMA domain for its default
domain.
Add a global static identity domain with guaranteed attach semantics for
IOMMUs that support passthrough translation mode.
The global static identity domain is a dummy domain without corresponding
dmar_domain structure. Consequently, the device's info->domain will be
NULL with the identity domain is attached. Refactor the code accordingly.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240809055431.36513-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extract common code from domain_context_mapping_one() into new helpers,
making it reusable by other functions such as the upcoming identity domain
implementation. No intentional functional changes.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240809055431.36513-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The has_iotlb_device flag was used to indicate if a domain had attached
devices with ATS enabled. Domains without this flag didn't require device
TLB invalidation during unmap operations, optimizing performance by
avoiding unnecessary device iteration.
With the introduction of cache tags, this flag is no longer needed. The
code to iterate over attached devices was removed by commit 06792d0679
("iommu/vt-d: Cleanup use of iommu_flush_iotlb_psi()").
Remove has_iotlb_device to avoid unnecessary code.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240809055431.36513-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We will use a global static identity domain. Reserve a static domain ID
for it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240809055431.36513-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As the driver has enforced DMA domains for devices managed by an IOMMU
hardware that doesn't support passthrough translation mode, there is no
need for static identity mappings in the si_domain. Remove the identity
mapping code to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240809055431.36513-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu core defines the def_domain_type callback to query the iommu
driver about hardware capability and quirks. The iommu driver should
declare IOMMU_DOMAIN_DMA requirement for hardware lacking pass-through
capability.
Earlier VT-d hardware implementations did not support pass-through
translation mode. The iommu driver relied on a paging domain with all
physical system memory addresses identically mapped to the same IOVA
to simulate pass-through translation before the def_domain_type was
introduced and it has been kept until now. It's time to adjust it now
to make the Intel iommu driver follow the def_domain_type semantics.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240809055431.36513-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The helper intel_context_flush_present() is designed to flush all related
caches when a context entry with the present bit set is modified. It
currently retrieves the domain ID from the context entry and uses it to
flush the IOTLB and context caches. This is incorrect when the context
entry transitions from present to non-present, as the domain ID field is
cleared before calling the helper.
Fix it by passing the domain ID programmed in the context entry before the
change to intel_context_flush_present(). This ensures that the correct
domain ID is used for cache invalidation.
Fixes: f90584f4be ("iommu/vt-d: Add helper to flush caches for context change")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-iommu/20240814162726.5efe1a6e.alex.williamson@redhat.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240815124857.70038-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Directly call into dma-iommu just like we have been doing for dma-direct
for a while. This avoids the indirect call overhead for IOMMU ops and
removes the need to have DMA ops entirely for many common configurations.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
Intel IOMMU operates on inclusive bounds (both generally aas well as
iommu_domain_identity_map()). Meanwhile, for_each_mem_pfn_range() uses
exclusive bounds for end_pfn. This creates an off-by-one error when
switching between the two.
Fixes: c5395d5c4a ("intel-iommu: Clean up iommu_domain_identity_map()")
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Suggested-by: Gary Zibrat <gzibrat@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240709234913.2749386-1-pandoh@google.com
Signed-off-by: Will Deacon <will@kernel.org>
The helper calculate_psi_aligned_address() is used to convert an arbitrary
range into a size-aligned one.
The aligned_pages variable is calculated from input start and end, but is
not adjusted when the start pfn is not aligned and the mask is adjusted,
which results in an incorrect number of pages returned.
The number of pages is used by qi_flush_piotlb() to flush caches for the
first-stage translation. With the wrong number of pages, the cache is not
synchronized, leading to inconsistencies in some cases.
Fixes: c4d27ffaa8 ("iommu/vt-d: Add cache tag invalidation helpers")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240709152643.28109-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Address mask specifies the number of low order bits of the address field
that must be masked for the invalidation operation.
Since address bits masked start from bit 12, the max address mask should
be MAX_AGAW_PFN_WIDTH, as defined in Table 19 ("Invalidate Descriptor
Address Mask Encodings") of the spec.
Limit the max address mask returned from calculate_psi_aligned_address()
to MAX_AGAW_PFN_WIDTH to prevent potential integer overflow in the
following code:
qi_flush_dev_iotlb():
...
addr |= (1ULL << (VTD_PAGE_SHIFT + mask - 1)) - 1;
...
Fixes: c4d27ffaa8 ("iommu/vt-d: Add cache tag invalidation helpers")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240709152643.28109-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
This helper is used to flush the related caches following a change in a
context table entry that was previously present. The VT-d specification
provides guidance for such invalidations in section 6.5.3.3.
This helper replaces the existing open code in the code paths where a
present context entry is being torn down.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240701112317.94022-2-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20240702130839.108139-7-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Emitting a warning is overkill in intel_setup_irq_remapping() since the
interrupt remapping is pre-enabled. For example, there's no guarantee
that kexec will explicitly disable interrupt remapping before booting a
new kernel. As a result, users are seeing warning messages like below
when they kexec boot a kernel, though there is nothing wrong:
DMAR-IR: IRQ remapping was enabled on dmar18 but we are not in kdump mode
DMAR-IR: IRQ remapping was enabled on dmar17 but we are not in kdump mode
DMAR-IR: IRQ remapping was enabled on dmar16 but we are not in kdump mode
... ...
Downgrade the severity of this message to avoid user confusion.
CC: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/linux-iommu/5517f76a-94ad-452c-bae6-34ecc0ec4831@molgen.mpg.de/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240625043912.258036-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20240702130839.108139-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
The VT-d specification has removed architectural support of the requests
with pasid with a value of 1 for Execute-Requested (ER). And the NXE bit
in the pasid table entry and XD bit in the first-stage paging Entries are
deprecated accordingly.
Remove the programming of these bits to make it consistent with the spec.
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240624032351.249858-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20240702130839.108139-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Queued invalidation wait descriptor status is volatile in that IOMMU
hardware writes the data upon completion.
Use READ_ONCE() to prevent compiler optimizations which ensures memory
reads every time. As a side effect, READ_ONCE() also enforces strict
types and may add an extra instruction. But it should not have negative
performance impact since we use cpu_relax anyway and the extra time(by
adding an instruction) may allow IOMMU HW request cacheline ownership
easier.
e.g. gcc 12.3
BEFORE:
81 38 ad de 00 00 cmpl $0x2,(%rax)
AFTER (with READ_ONCE())
772f: 8b 00 mov (%rax),%eax
7731: 3d ad de 00 00 cmp $0x2,%eax
//status data is 32 bit
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20240607173817.3914600-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702130839.108139-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
When a domain is attached to a device, the required cache tags are
assigned to the domain so that the related caches can be flushed
whenever it is needed. The device TLB cache tag is created based
on whether the ats_enabled field of the device's iommu data is set.
This creates an ordered dependency between cache tag assignment and
ATS enabling.
The device TLB cache tag would not be created if device's ATS is
enabled after the cache tag assignment. This causes devices with PCI
ATS support to malfunction.
The ATS control is exclusively owned by the iommu driver. Hence, move
cache_tag_assign_domain() after PCI ATS enabling to make sure that the
device TLB cache tag is created for the domain.
Fixes: 3b1d9e2b2d ("iommu/vt-d: Add cache tag assignment interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240620062940.201786-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use try_cmpxchg64() instead of cmpxchg64 (*ptr, old, new) != old in
intel_pasid_get_entry(). cmpxchg returns success in ZF flag, so
this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240522082729.971123-2-ubizjak@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
