The bootloader configures a reserved memory region for framebuffer,
which is protected by the IOMMU. The kernel-side driver is oblivious as
of which memory region is set up by the bootloader. In such case, the
IOMMU tries to reference the reserved region - which is not reserved in
the kernel anymore - and it results in an unrecoverable page fault. More
information about it is provided in [1].
Add support for reserved regions using iommu_dma_get_resv_regions().
For OF supported boards, this requires defining the region in the
iommu-addresses property of the IOMMU owner's node.
Link: https://lore.kernel.org/r/544ad69cba52a9b87447e3ac1c7fa8c3@disroot.org [1]
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250712-exynos-sysmmu-resv-regions-v1-1-e79681fcab1a@disroot.org
Signed-off-by: Will Deacon <will@kernel.org>
These drivers just have a constant value for their page size, move it
into their domain_alloc_paging function before setting up the geometry.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # for s390-iommu.c
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> # for exynos-iommu.c
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun50i-iommu.c
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A few small changes to the remaining drivers using these will allow
them to be removed:
- Exynos wants to allocate fixed 16K/8K allocations
- Rockchip already has a define SPAGE_SIZE which is used by the
dma_map immediately following, using SPAGE_ORDER which is a lg2size
- tegra has size constants already for its two allocations
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we have a folio under the allocation iommu_free_pages() can know
the order of the original allocation and do the correct thing to free it.
The next patch will rename iommu_free_page() to iommu_free_pages() so we
have naming consistency with iommu_alloc_pages_node().
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-c8663abbb606+3f7-iommu_pages_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe
path") changed the sequence of probing the SYSMMU controller devices and
calls to arm_iommu_attach_device(), what results in resuming SYSMMU
controller earlier, when it is still set to IDENTITY mapping. Such change
revealed the bug in IDENTITY handling in the exynos-iommu driver. When
SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so
adjust checks in suspend & resume callbacks to handle this case
correctly.
Fixes: b3d14960e6 ("iommu/exynos: Implement an IDENTITY domain")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250401202731.2810474-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some typos in comments/messages:
- modyfying -> modifying
- Unabled -> Unable
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://lore.kernel.org/r/20250210112027.29791-1-algonell@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert iommu/exynos-iommu.c to use the new page allocation functions
provided in iommu-pages.h.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-7-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These drivers are all trivially converted since the function is only
called if the domain type is going to be
IOMMU_DOMAIN_UNMANAGED/DMA.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yong Wu <yong.wu@mediatek.com> #For mtk_iommu.c
Link: https://lore.kernel.org/r/23-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
What exynos calls exynos_iommu_detach_device is actually putting the iommu
into identity mode.
Move to the new core support for ARM_DMA_USE_IOMMU by defining
ops->identity_domain.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some subtle differences between release_device() and
set_platform_dma_ops() callbacks, so separate those two callbacks. Device
links should be removed only in release_device(), because they were
created in probe_device() on purpose and they are needed for proper
Exynos IOMMU driver operation. While fixing this, remove the conditional
code as it is not really needed.
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 189d496b48 ("iommu/exynos: Add missing set_platform_dma_ops callback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230315232514.1046589-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SysMMU v7 has a bit different registers for getting the fault info:
- there is one single register (MMU_FAULT_VA) to get the fault address
- fault access type (R/W) can be read from MMU_FAULT_TRANS_INFO
register now
- interrupt status register has different bits w.r.t. previous SysMMU
versions
- VM and non-VM layouts have different register addresses
Add correct fault handling implementation for SysMMU v7, according to
all mentioned differences. Only VID #0 (default) is handled, as VM
domains support is not implemented yet.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220726200739.30017-3-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fault info obtaining is implemented for SysMMU v1..v5 in a very hardware
specific way, as it relies on:
- interrupt bits being tied to read or write access
- having separate registers for the fault address w.r.t. AR/AW ops
Newer SysMMU versions (like SysMMU v7) have different way of providing
the fault info via registers:
- the transaction type (read or write) should be read from the
register (instead of hard-coding it w.r.t. corresponding interrupt
status bit)
- there is only one single register for storing the fault address
Because of that, it is not possible to add newer SysMMU support into
existing paradigm. Also it's not very effective performance-wise:
- checking SysMMU version in ISR each time is not necessary
- performing linear search to find the fault info by interrupt bit can
be replaced with a single lookup operation
Pave the way for adding support for new SysMMU versions by abstracting
the getting of fault info in ISR. While at it, do some related style
cleanups as well.
This is mostly a refactoring patch, but there are some minor functional
changes:
- fault message format is a bit different; now instead of AR/AW
prefixes for the fault's name, the request direction is printed as
[READ]/[WRITE]. It has to be done to prepare an abstraction for
SysMMU v7 support
- don't panic on unknown interrupts; print corresponding message and
continue
- if fault wasn't recovered, panic with some sane message instead of
just doing BUG_ON()
The whole fault message looks like this now:
[READ] PAGE FAULT occurred at 0x12341000
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220726200739.30017-2-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If platform_driver_register() fails, it don't need unregister and call
kmem_cache_free() to free the memory allocated before calling register.
Fixes: bbc4d205d9 ("iommu/exynos: Fix driver initialization sequence")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230104095702.2591122-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu core calls the driver's detach_dev domain op callback only when
a device is finished assigning to user space and
iommu_group_release_dma_owner() is called to return the device to the
kernel, where iommu core wants to set the default domain to the device but
the driver didn't provide one.
In other words, if any iommu driver provides default domain support, the
.detach_dev callback will never be called. This removes the detach_dev
callbacks in those IOMMU drivers that support default domain.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev> # apple-dart
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> # sprd
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> # amd
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Registering a SYSMMU platform driver might directly trigger initializing
IOMMU domains and performing the initial mappings. Also the IOMMU core
might use the IOMMU hardware once it has been registered with
iommu_device_register() function. Ensure that all driver resources are
allocated and initialized before the driver advertise its presence to the
platform bus and the IOMMU subsystem.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221110154407.26531-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to enable SysMMU v7 with VM register layout, at least the
default VM instance (n=0) must be enabled, in addition to enabling the
SysMMU itself. To do so, add corresponding write to MMU_CTRL_VM[0]
register, before writing to MMU_CTRL register.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-7-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SysMMU v7 might have different register layouts (VM capable or non-VM
capable). Virtual Machine registers (if present) implement multiple
translation domains. If VM registers are not present, the driver
shouldn't try to access those.
Check which layout is implemented in current SysMMU module (by reading
the capability registers) and prepare the corresponding variant
structure for further usage.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-6-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
At the moment the driver supports SysMMU v1..v5 versions. SysMMU v5 has
different register layout than SysMMU v1..v3. Instead of checking the
version each time before reading/writing the registers, let's create
corresponding register structure for each SysMMU version and set the
needed structure on init, checking the SysMMU version one single time.
This way is faster and more elegant.
No behavior changes from the user's point of view, it's only a
refactoring patch.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-5-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SysMMU v5+ supports 36 bit physical address space. Set corresponding DMA
mask to avoid falling back to SWTLBIO usage in dma_map_single() because
of failed dma_capable() check.
The original code for this fix was suggested by Marek.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Co-developed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220714165550.8884-4-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If iommu_device_register() fails in exynos_sysmmu_probe(), the previous
calls have to be cleaned up. In this case, the iommu_device_sysfs_add()
should be cleaned up, by calling its remove counterpart call.
Fixes: d2c302b6e8 ("iommu/exynos: Make use of iommu_device_register interface")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-3-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Using SZ_4K in context of SysMMU driver is better than using PAGE_SIZE,
as PAGE_SIZE might have different value on different platforms. Though
it would be even better to use more specific constants, already existing
in SysMMU driver. Make the code more strict by using SPAGE_ORDER and
SPAGE_SIZE constants.
It also makes sense, as __sysmmu_tlb_invalidate_entry() also uses
SPAGE_* constants for further calculations with num_inv param, so it's
logical that num_inv should be previously calculated using also SPAGE_*
values.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-2-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PAGE_{SIZE,SHIFT} macros depend on the configured kernel's page size, but
the driver expects values calculated as for 4KB pages. Fix this.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220623093629.32178-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since .release_device is now called through per-device ops, any call
which gets as far as a driver definitely *is* for that driver, for a
device which has successfully passed .probe_device, so all the checks to
that effect are now redundant and can be removed. In the same vein we
can also skip freeing fwspecs which are now managed by core code.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/02671dbfad7a3343fc25a44222350efcb455fe3c.1655822151.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the domain specific operations out of struct iommu_ops into a new
structure that only has domain specific operations. This solves the
problem of needing to know if the method vector for a given operation
needs to be retrieved from the device or the domain. Logically the domain
ops are the ones that make sense for external subsystems and endpoint
drivers to use, while device ops, with the sole exception of domain_alloc,
are IOMMU API internals.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220216025249.3459465-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it
from everywhere else.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The initialization of 'fault_addr' local variable is not needed as it is
shortly after overwritten.
Addresses-Coverity: Unused value
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210408201622.78009-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: aa759fd376 ("iommu/exynos: Add callback for initializing devices from device tree")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200918011335.909141-1-yukuai3@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The name "update_pte" is a little too generic, and can end up clashing
with architecture pagetable code leaked out of common mm headers. Rename
it to something more appropriately namespaced.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/829bb5dc18e734870b75db673ddce86e7e37fc73.1594727968.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200625130836.1916-2-joro@8bytes.org
Convert the Exynos IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-32-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On Exynos platforms there can be more than one SYSMMU (IOMMU) for one
DMA master device. Since the IOMMU core code expects only one hardware
IOMMU, use the first SYSMMU in the list.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-31-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a gfp_t parameter to the iommu_ops::map function.
Remove the needless locking in the AMD iommu driver.
The iommu_ops::map function (or the iommu_map function which calls it)
was always supposed to be sleepable (according to Joerg's comment in
this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so
should probably have had a "might_sleep()" since it was written. However
currently the dma-iommu api can call iommu_map in an atomic context,
which it shouldn't do. This doesn't cause any problems because any iommu
driver which uses the dma-iommu api uses gfp_atomic in it's
iommu_ops::map function. But doing this wastes the memory allocators
atomic pools.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Exynos SYSMMU driver supports deferred probe. It happens when clocks
needed for this driver are not yet available. Typically next calls to
driver ->probe() happen before init section is free, but this is not
really guaranteed. To make if safe, remove __init annotation from
exynos_sysmmu_probe() function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To allow IOMMU drivers to batch up TLB flushing operations and postpone
them until ->iotlb_sync() is called, extend the prototypes for the
->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to
the current iommu_iotlb_gather structure.
All affected IOMMU drivers are updated, but there should be no
functional change since the extra parameter is ignored for now.
Signed-off-by: Will Deacon <will@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
