After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/input/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in a few drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241008090009.462836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-25-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-23-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compiling with W=1 the following warnings are triggered:
drivers/input/serio/serio_raw.c: In function ‘serio_raw_connect’:
drivers/input/serio/serio_raw.c:303:28: error: ‘%ld’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Werror=format-truncation=]
303 | "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
atomic_inc_return() returns an int, so there is no reason to cast it
to long and print as such. Fix the issue by removing the cast,
printing it as unsigned decimal, and expanding the name from 16 to 20
bytes to accommodate the largest possible port number.
Link: https://lore.kernel.org/r/20240905041732.2034348-22-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use guard notation when acquiring mutexes and spinlocks, and when
pausing and resuming serio port. Such guard notation makes the code
more compact and error handling more robust by ensuring that locks
are released in all code paths when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-21-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-20-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-14-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240905041732.2034348-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that serio ports are resumed in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044938.1049843-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044929.1049700-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/ZtjJKxQRRzJE0aWZ@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044914.1049280-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044902.1049017-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/ZtjKJsArLu3byTU6@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044834.1048468-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240904044825.1048256-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044814.1048062-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044806.1047847-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240904044756.1047629-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044735.1047285-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released and interrupts are
re-enabled in all code paths when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240904044244.1042174-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Link: https://lore.kernel.org/r/20240904043104.1030257-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Start using __free() and guard() primitives to simplify the code
and error handling. This makes the code more compact and error
handling more robust by ensuring that locks are released in all
code paths when control leaves critical section and all allocated
memory is freed.
Link: https://lore.kernel.org/r/ZsrBC7qDbOvAaI-W@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZv3NAgAKCRBZ7Krx/gZQ
68kbAP0YzQxUgl0/o7Soda8XwKSPZTM9ls6kRk1UHTTG/i4ZigEA/G+i/mBQctL0
AB911kK8mxfXppfOXzstFBjoJSqiigQ=
=IE7D
-----END PGP SIGNATURE-----
Merge tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped temporarily
because its detection routine is too greedy and mis-identifies devices
from other vendors as PixArt devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZv0LRAAKCRBAj56VGEWX
nM7OAP495t23Ay4H7qBnVEv4KHrOkNLwebKudwcokjWQAdnOPgEAu0GfslScWdrO
yYofhsjrph1V2dQOWqoLnd1C4iiHVgA=
=HQCS
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped
temporarily because its detection routine is too greedy and
mis-identifies devices from other vendors as PixArt devices
* tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adp5589-keys - fix adp5589_gpio_get_value()
Input: adp5589-keys - fix NULL pointer dereference
Revert "Input: Add driver for PixArt PS/2 touchpad"
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit 740ff03d72 because
current PixArt detection is too greedy and claims devices that are
not PixArt.
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit fixes several typographical errors in comments within
the driver/input directory. No functional changes are made.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240926031457.3479350-1-yujiaoliang@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-3-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is done in preparation to introduce other variants of the Novatek NVT
touchscreen controller that can be supported by the driver.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch IC
registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup functions
to simplify releasing of resources (with more drivers to follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZvGnWgAKCRBAj56VGEWX
nDjGAQCHcRk1icJlyjx3KA85gdILriDB9zMNJnCnbYXrSfGbOQD+LZNjO3po26zB
wloLEYTKRu3E/oWEI8VcfIN2m89vxw4=
=bDsb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce3 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240918032246.9147-1-shenlichuan@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
osS0AQCgIpvey9oW5DMyMw6Bv0hFMRv95gbNQZfHy09iK+NMNAD9GALhb/4cMIVB
7YrZGXEz454lpgcs8AnrOVjVNfctOQg=
=e9s9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u32_array() takes a
minimum and maximum length and returns the actual length (or error
code).
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240913200827.546649-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9ee0a05588 ("Input: PS/2 gpio bit banging driver for serio bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20240912033013.2610949-1-ruanjinjie@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
f_version is removed from struct file. Make input stop abusing f_version
for stashing information for poll. Move the input state counter into
input_seq_state and allocate it via seq_private_open() and free via
seq_release_private().
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-12-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The driver waits for the device to boot, which can be a lengthy
process. Switch it to asynchronous probing to allow more devices
to be probed simultaneously.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop forcing interrupt to be low level triggered and instead rely on the
platform to define proper trigger to allow flexibility in board designs.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not actively manage regulator state past probe() time,
so we can use devm_regulator_get_enable() to simplify the code.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-16-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This regulator is not optional from the controller point of view,
so stop treating it as such. For hard-wired designs that omit the
regulator from their device trees regulator subsystem will create
a dummy instance.
This may introduce unnecessary delay of 100us in case of dummy
regulator, but if it is important the driver should be marked as
using asynchronous probing to avoid even longer delays waiting for
the command completions.
Also use usleep_range() instead of udelay() to avoid spinning.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use dev_err_probe() helper to log deferrals in the devices_deferred
debugfs file and avoid extra messages in the logs.
Also rename "ret" variables holding error codes only to "error".
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We should abort probe on any error besides -ENOENT which signifies that
the regulator is not defined in device tree or elsewhere, not only
when we see -EPROBE_DEFER.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-12-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Zforce touch data packet consists of a byte representing number of
contacts followed by several chunks with length of 9 bytes representing
each contact. Instead of accounting for the leading byte by increasing
offset of each field in contacts by one introduce a pointer to contact
data and point it appropriately. This avoids awkward constructs like:
point.prblty = payload[9 * i + 9];
which makes it seem like there is off-by-one error, in favor of more
straightforward:
point.prblty = p[8];
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing conversion from little-endian data to CPU endianness
by hand use existing helpers.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation allows for simpler code and ensures that mutexes are
automatically released in all code paths.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a small chance that ts->suspending flag may change while the
interrupt handler is running. To make sure call to pm_relax() is not
skipped on accident use a temporary to hold the original value at the
beginning of interrupt. Use READ_ONCE() so that the value is actually
fetched at the right time.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to have a lock around calls to i2c_master_send() and
i2c_master_recv() as they are not issued concurrently and they are not
sharing any buffers. Also there is no need for command_mutex as all
commands are issued sequentially.
Remove both.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core and various helpers already do that for us, so drop the code
setting these bits explicitly.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-tree users of platform data and any new ones should
either use device tree or static device properties, so let's remove
platform data support.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_mt_report_slot_state() returns true if slot is active, so we can
combine checks for point.state != STATE_UP.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup
function has been already called by the helper if there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that locks are released in all code paths when control
leaves critical section.
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references
to acquired fwnodes are dropped at appropriate times automatically.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Start using __free() and guard() primitives to simplify the code
and error handling. This makes the code more compact and error
handling more robust by ensuring that locks are released in all
code paths when control leaves critical section and all allocated
memory is freed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240825051627.2848495-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/ZsrBkWIpyEqzClUG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240905164851.771578-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no more users of struct matrix_keypad_platform_data in the
kernel, remove support for it from the driver.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240805014710.1961677-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gpiod API and generic device properties work with software nodes and
static properties, which will allow removing platform data support
from the driver, simplifying and streamlining the code.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240805014710.1961677-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no users of this functionality in the mainline kernel (it was
only available to boards using platform data and not device tree).
Remove it to simplify the code.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240805014710.1961677-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop clobbering "item" variable when checking if the device supports
querying DPM values because its original value is still needed in
case when we need to fall back to the old way of figuring sensor size.
Reported-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Fixes: 14d650fcb7 ("Input: synaptics-rmi4 - add support for querying DPM value (F12)")
Link: https://lore.kernel.org/r/ZtdQW7nqAOEJDNBN@radian
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----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=fUHS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbVkXIACgkQYKtH/8kJ
UicZlA//eDFRRTxL5MOHhVY5hpn8Sn0a59Wz0S1x+xy5WnGxxh6EMnyLGr8vxmGp
FREvraghX0/ftPIvDMRD2WgR93R96Q0d10tmLf9Es7iG9WskXqNsWBkTijCdvst4
1iEC/wSu8ab2HGhtoUIM1Wt9R+RlkS7UE0TPRzchGQTM9FdytVv9qECtX9JGi7Wn
CvCgcFGifKyOzigm3a4kf3FPtB8Y/ggPLOoDyIHOlM8lrdGmDh5PXuzbeKMxwSt1
YBZS4T5QaWvwaT8ZOraAMYjNN+PmiL587JbY9L+H+VwPV5VpoxlNmNo3wjkAb1q/
hg4huRJlN7BvN1wTQtsnDpzt4VgnIDOh+RXJ/ulUKSGLQ3TosV88FFIGfAO+KTBP
PaQI4taxcyhsnhl4ab040jumfUbeK8DHwCc1P/HsejYy6H9bmjwFV8WCbSZTNH6g
if6fcGRYIzw8MzeqtTH1qjLwhqYt/iXUahHzzONWzskvzR/kPV1x/mSPQNVcJ51e
rL6D485CjZh85pY7Pvn4+Ylur9uIe9wealipfSFzWlAgo57sTY6xrilO20UHnR6t
n+202dPG8TAoDrpomLsF04rbuV4uhv0gWhtIyCzaJHYfgCUgAQvzniR2T6IaOTM3
ks/SZ0j+sv65/KJd8rO1tZHwgEVwmDElRzO9CPF3pQxMrzKG5iw=
=28qZ
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The different revisions of the Zinitix BTXXX touchscreens place
the icon status register (to read out touchkey status) in
different places. Use the chip revision bits to discern
between the different versions at runtime.
This makes touchkeys work on the BT404 on the Samsung Codina
GT-I8160 mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240830-zinitix-tk-versions-v2-2-90eae6817eda@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The chip hardware revision, firmware version and regdata
revision is needed to discern because for example touchkeys
are handled by different registers on different versions of
the chip. Example output from BT404:
Zinitix-TS 3-0020: chip revision 4040 firmware version 0088
regdata version 0004
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240830-zinitix-tk-versions-v2-1-90eae6817eda@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to using devm_clk_get_optional_enabled() helper instead of
acquiring the clock with devm_clk_get_optional(), enabling it, and
defining and installing a custom devm action to call clk_disable().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/ZtDDGMaOFlMYjOrt@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where timeout condition is incorrectly reported for
all extended Cypress commands.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZtI2cgAKCRBAj56VGEWX
nJGNAQCYR/VQOtGBoIo4/0VdxxH6qTuLu7XhWbBdzgx8ee6t6gD/Rj94mEpOh12V
JEd3MiDdEtQt5KwwdkzUyiHYJ0x1WAw=
=PzXA
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
This makes the code more compact and error handling more robust
by ensuring that mutexes are released in all code paths when control
leaves critical section.
Acked-by: Henrik Rydberg <rydberg@bitmath.org>
Link: https://lore.kernel.org/r/ZsrBVO2w9WwX73iU@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(kfree) cleanup facility in matrix_keypad_parse_keymap() to
automatically free temporarily allocated memory.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/ZspoEPdTcH-hpciy@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 8bccf667f6 ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.
Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8bccf667f6 ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/a8252e0f-dab4-ef5e-2aa1-407a6f4c7204@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Keypad specific setup is relaxed if no keypad rows/columns are specified,
enabling a purely gpio operation.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-2-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The BBM module provides BUTTON feature. To i.MX95, this module
is managed by System Manager and exported using System Management
Control Interface(SCMI). Linux could use i.MX SCMI BBM Extension
protocol to use BUTTON feature.
This driver is to use SCMI interface to enable pwrkey.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-7-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Switch to using devm_clk_get_enable() helper instead of acquiring the
clock with devm_clk_get(), enabling it, and defining and installing
a custom devm action to call clk_disable().
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Zs4UWGKt3hLjNmoP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240827123411.431388-1-liaochen4@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240826045253.3503-1-shenlichuan@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Limit amount of data that can be written into an evdev instance at
a given time to 4096 bytes (170 input events) to avoid holding
evdev->mutex for too long and starving other users.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://lore.kernel.org/r/Zr5L8TUzkJcB9HcF@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZsjxKQAKCRBAj56VGEWX
nKE9APwPOZl4TldhPLG37LCvlVmgN0cSSWY+PEEqIaxmFtezjQEAr2/qs1XknZVr
LkuhmHxng2ZI9X4HUL+h52Lha7y4UAc=
=3Pcb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
The users of this driver were removed in 2013 in commit 28633c54bd
("ARM: ux500: Rip out keypad initialisation which is no longer used").
Remove the driver as well.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Zr-gX0dfN4te_8VG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210916153148.14045-1-caihuoqing@baidu.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The old quirk combination sometimes cause a laggy keyboard after boot. With
the new quirk the initial issue of an unresponsive keyboard after s3 resume
is also fixed, but it doesn't have the negative side effect of the
sometimes laggy keyboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not try to power down the rails at system suspend or
when touchscreen is not in use, but rather enables regulators at probe
time. Power savings are achieved by requesting the controller to enter
low power mode.
Switch to devm_regulator_bulk_get_enable() instead of separately
requesting regulators, enabling them, and installing a custom
devm-action to disable them on unbind/remove, which simplifies the
code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAgj9rG6oVqfdoK@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not use legacy GPIO API, stop including this header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAaOu_vf-cVBhRn@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not use legacy GPIO API, stop including this header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAaHWNvaAfDlDfI@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ensure that the touchscreen response has correct "report id" byte
before processing the touch data and discard other messages.
Fixes: 42370681bd ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-3-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Newer firmware allows to query touchpad resolution information by
reading from resolution register. Presence of resolution register is
signalled via bit 29 of the "register presence" register. On devices
that lack this resolution register we fall back to using pitch and
number of receivers data to calculate size of the sensor.
Signed-off-by: Marge Yang <marge.yang@tw.synaptics.com>
Signed-off-by: Vincent Huang <Vincent.Huang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20240805083636.1381205-1-marge.yang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of setting irq_set_irq_wake() directly in probe(), mark the device
as wakeup-capable, and use enable_irq_wake() and disable_irq_wake() in
suspend/resume path.
This also allows changing the wakeup setting dynamically at runtime using
/sys/devices/.../tsc2005/power/wakeup.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240711172719.1248373-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the driver has been converted to use gpiod API it was requesting
and asserting the reset on probe, but never deasserted it. However
because of incorrect annotations in device tree marking reset line as
active high whereas in reality it is active low, the end result was
that the chip was never reset on probe. With polarity of the reset line
now corrected this became a problem.
Fix this by calling tsc200x_reset() from tsc200x_probe() to properly
complete the reset sequence and move requesting the reset GPIO and VIO
supply closer to the point where we need to start talking to the
hardware.
Fixes: d257f2980f ("Input: tsc2005 - convert to gpiod")
Link: https://lore.kernel.org/r/20240711172719.1248373-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The chip needs to be powered up before calling tsc200x_stop_scan() which
communicates with it; move the call to enable the regulator earlier in
tsc200x_probe().
At the same time switch to using devm_regulator_get_enable() to simplify
error handling. This also makes sure that regulator is not shut off too
early when unbinding the driver.
Link: https://lore.kernel.org/r/20240711172719.1248373-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver supports the FT8201 chip as well. It registers up to 10 touch
points.
Tested on: Lenovo ThinkSmart View (CD-18781Y), LCM: BOE TV080WXM-LL4
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240804031310.331871-3-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-14-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The abs-fuzz and abs-flat properties are documented as optional. When
these are absent, fwnode_property_read_u32() will leave the input
unchanged, meaning that an axis either picks up the value for the
previous axis or an uninitialized value.
Explicitly set these values to zero when they are unspecified to match
the documented behaviour in the device tree bindings.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240731093310.3696919-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).
Since nobody knows possible max slots, this patch chose 1024.
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use devm_clk_get_prepared() in order to remove a clk_unprepare() in an
error handling path of the probe and from the .remove() function.
This done, the whole .remove() function can also be axed because
'input_dev' is a managed resource allocated with
devm_input_allocate_device() and we can fully rely on devm for cleaning up.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/062986b0a5105cbc61330da0e55b22c00e2c1c4f.1722062145.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
The kernel reports that the touchpad for this device can support a
different bus.
With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch introduces a driver for the PixArt PS/2 touchpad, which
supports both clickpad and touchpad types.
At the same time, we extended the single data packet length to 16,
because according to the current PixArt hardware and FW design, we need
11 bytes/15 bytes to represent the complete three-finger/four-finger data.
Co-developed-by: Jon Xie <jon_xie@pixart.com>
Signed-off-by: Jon Xie <jon_xie@pixart.com>
Co-developed-by: Jay Lee <jay_lee@pixart.com>
Signed-off-by: Jay Lee <jay_lee@pixart.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20240704125243.3633569-1-zhoubinbin@loongson.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.
"
ads7846 spi2.1: spi_sync --> -22
"
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard"
and "__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors
from the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZpWmqQAKCRBAj56VGEWX
nE00AQDsikkxIpF5GJo3mhHLHQc5noEB/zwwLNTqEmV/ThdffwD/bQmr0C0M1dhz
fOM9NqeyhwKkgGd389AIzv/dV7KIGwI=
=rQCl
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard" and
"__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors from
the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
Input: yealink - simplify locking in sysfs attribute handling
Input: yealink - use driver core to instantiate device attributes
Input: ati-remote2 - use driver core to instantiate device attributes
Input: omap-keypad - use driver core to instantiate device attributes
Input: atmel_mxt_ts - use driver core to instantiate device attributes
Input: exc3000 - add EXC81W32 support
dt-bindings: input: touchscreen: exc3000: add EXC81W32
Input: twl4030-pwrbutton - fix kernel-doc warning
Input: himax_hx83112b - add support for HX83100A
Input: himax_hx83112b - add himax_chip struct for multi-chip support
Input: himax_hx83112b - implement MCU register reading
Input: himax_hx83112b - use more descriptive register defines
dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
Input: do not check number of events in input_pass_values()
Input: preallocate memory to hold event values
Input: rearrange input_alloc_device() to prepare for preallocating of vals
Input: simplify event handling logic
Input: make events() method return number of events processed
Input: make sure input handlers define only one processing method
Input: evdev - remove ->event() method
...
Zinitix touch controllers can use some of the sense lines for virtual
keys (like those found on many phones). Add support for those keys.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240717-zinitix-tkey-v5-2-52ea4cd4bd50@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
Export a sysfs interface that would allow reading and writing touchscreen
IC registers. With this interface many things can be done in usersapce
such as firmware updates. An example tool that utilizes this interface
for performing firmware updates can be found at [1].
[1] https://github.com/goodix/fwupdate_for_berlin_linux
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Link: https://lore.kernel.org/r/20240514115135.21410-1-charles.goodix@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
This KUnit next update for Linux 6.11-rc1 consists of:
-- adds vm_mmap() allocation resource manager
-- converts usercopy kselftest to KUnit
-- disables usercopy testing on !CONFIG_MMU
-- adds MODULE_DESCRIPTION() to core, list, and usercopy tests
-- adds tests for assertion formatting functions - assert.c
-- introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
-- fixes KUNIT_ASSERT_STRNEQ comments to make it clear that it is
an assertion
-- renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
-----BEGIN PGP SIGNATURE-----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=nnFR
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- add vm_mmap() allocation resource manager
- convert usercopy kselftest to KUnit
- disable usercopy testing on !CONFIG_MMU
- add MODULE_DESCRIPTION() to core, list, and usercopy tests
- add tests for assertion formatting functions - assert.c
- introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
- fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an
assertion
- rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
* tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
kunit: executor: Simplify string allocation handling
kunit/usercopy: Add missing MODULE_DESCRIPTION()
kunit/usercopy: Disable testing on !CONFIG_MMU
usercopy: Convert test_user_copy to KUnit test
kunit: test: Add vm_mmap() allocation resource manager
list: test: add the missing MODULE_DESCRIPTION() macro
kunit: add missing MODULE_DESCRIPTION() macros to core modules
list: test: remove unused struct 'klist_test_struct'
kunit: Cover 'assert.c' with tests
Report input event directly on wakeup to ensure no press event is missed
when resuming from suspend.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240716000721.3485597-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
callers instead of them doing homegrown solutions. This will provide for
adding API support for confidential computing solutions like TDX
-----BEGIN PGP SIGNATURE-----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=4VPt
-----END PGP SIGNATURE-----
Merge tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware updates from Borislav Petkov:
- Add a unified VMware hypercall API layer which should be used by all
callers instead of them doing homegrown solutions. This will provide
for adding API support for confidential computing solutions like TDX
* tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Add TDX hypercall support
x86/vmware: Remove legacy VMWARE_HYPERCALL* macros
x86/vmware: Correct macro names
x86/vmware: Use VMware hypercall API
drm/vmwgfx: Use VMware hypercall API
input/vmmouse: Use VMware hypercall API
ptp/vmware: Use VMware hypercall API
x86/vmware: Introduce VMware hypercall API
MCS-5000/5080 chips belong to the 1st generation of Melfas chips,
manufactured in 2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. It is likely
that the driver was (like mcs5000_ts driver) was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC), but the touchkey device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in
2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. The commit
adding the driver mentioned that the driver was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC) but the touchscreen device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of using a single table containing information about various
touchscreens and enums to match the driver ID table data with chip
information define individual per-protocol instances of
usbtouch_device_info structure and reference them directly from
the usbtouch_devices ID table. This is simpler, safer, and uses less
memory in case some protocols are disabled.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The data in this table is shared between all instances of the
touchscreens so it should not be modified.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation of splitting big usbtouch_dev_info table into separate
per-protocol structures and constifying them move process_pkt() from the
device info into main drvice structure and set it up in probe().
We can derive if we should use single- or multi-packet handling based
on presence of get_pkt_len() method.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the driver's ID table closer to where it is used in preparation
to it using pointers to device info/parameters instead of device type
enum.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
In this case the err_fwnode_put label was no longer necessary and the
error code is returned directly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-6-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-5-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-4-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-3-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
In this case the err label was no longer necessary and EINVAL is
returned directly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-2-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240412-input_device_for_each_child_node_scoped-v1-1-dbad1bc7ea84@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaUVJQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGzHQH/2lCvFWJt5sM5xrl
16blU2fyZ0JlKuCwtIXmk67bih9SWKo9MG2PINnt5CxPlJeErE/q89OtbyccoyZ8
KvN76ZKitUtQgETT+cQ5Qcq2N38siH3TKV4Pqvo7RZddjiJK1/I0gAfsQ+hv+Dr/
vbLSHwrOkSvyBSTBFW1FoATTa1qyhQpSvk9ePyq7d27vLJyVnbjWN5WF96I41/yh
oZS9gQIOKtK6zUae+DlIkeY0ViBuH5PK3KOjED81oo1I+dUwxJOeyYM/9Jvhgwk6
9ELQU69MiWtBcqj0NWNRKpTEAGXgWCrr8juChI2SSBnJuMdFKSflt4fSfTv2qJA3
KwYEgVY=
=KtAj
-----END PGP SIGNATURE-----
Merge tag 'v6.10' into next
Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.
The locking rules in the driver came from era when sysfs attributes
could live past the point of time when device would be unbound from
the driver, and so used module-global semaphore (potentially shared
between multiple yealink devices). Thankfully these times are long
gone and attributes will not be accessible once they are removed.
Simplify the logic by moving to per-device mutex, stop checking if
there is driver data instance attached to the interface, and use
guard notation to acquire the mutex.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240710234855.311366-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240710234855.311366-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo8gaF_lKPAfcye1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct driver->dev_groups pointer to have the driver core
do it.
This also fixes issue with the attribute not being deleted on driver
unbind.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo9nofWJ1xg9MgKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes,
set struct driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo9kSFeGOZB9b3rq@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION
with different tpye of kunit_assert_type. The current naming of
KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their
similarities. To improve readability and symmetry, renames
KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming
consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical.
Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to
clarify its usage.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Do not use kernel-doc style for comment describing contents of the
source file, as it trips the script:
scripts/kernel-doc -none drivers/input/misc/twl4030-pwrbutton.c
drivers/input/misc/twl4030-pwrbutton.c:2: info: Scanning doc for function twl4030
drivers/input/misc/twl4030-pwrbutton.c:33: warning: expecting prototype for twl4030(). Prototype was for PWR_PWRON_IRQ() instead
1 warnings
Also remove file name from the same comment - it it not the best idea
to have it as they tend to get stale when sources get moved or renamed.
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Tested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/r/Zo3QE00GqCrA3M9b@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The HX83100A is a bit of an outlier in the Himax HX831xxx series of
touch controllers as it requires reading touch events through the AHB
interface of the MCU rather than providing a dedicated FIFO address like
the other chips do.
This patch implements the specific read function and introduces the
HX83100A chip with an appropriate i2c ID and DT compatible string.
The HX83100A doesn't have a straightforward way to do chip
identification, which is why it is not implemented in this patch.
Tested on: Lenovo ThinkSmart View (CD-18781Y) / Innolux P080DDD-AB2 LCM
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Tested-by: Paul Gale <paul@siliconpixel.com>
Link: https://lore.kernel.org/r/20240620145019.156187-6-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for HX83100A support allow defining separate functions
for specific chip operations.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-5-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Implement reading from the MCU in a more universal fashion. This allows
properly handling reads of more than 4 bytes using the AHB FIFO
implemented in the chip.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-4-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that the input_dev->vals array is always there we can be assured
that input_pass_values() is always called with a non-0 number of
events. Remove the check.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Preallocate memory for holding event values (input_dev->vals) so that
there is no need to check if it was allocated or not in the event
processing code.
The amount of memory will be adjusted after input device has been fully
set up upon registering device with the input core.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation to have dev->vals memory pre-allocated rearrange
code in input_alloc_device() so that it allows handling multiple
points of failure.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Streamline event handling code by providing batch implementations for
filtering and event processing and using them in place of the main
event handler, as needed, instead of having complex branching logic
in the middle of the event processing code.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation to consolidating filtering and event processing in the
input core change events() method to return number of events processed
by it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core expects input handlers to be either filters, or regular
handlers, but not both. Additionally, for regular handlers it does
not make sense to define both single event method and batch method.
Refuse registering handler if it defines more than one method.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core favors ->events() (batch) method over ->event() method
if the former is defined, so there is no point in defining evdev_event()
as it is never called. Remove it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038 is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
Unlike IST3038C/IST3032C, IST3038 has different registers for commands,
which means IST3038 doesn't use protocol B.
Similar to IST3032C and maybe the other variants, IST3038 has touch keys
support, which provides KEY_APPSELECT and KEY_BACK.
Add support for IST3038 with touch keys.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-4-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
protocol_b is a property, which tells Imagis panel to use a different
format for coordinates.
IST30XXC series is known for using protocol B, while the other series
aren't. Note this could be confusing, unlike the model name implies.
Adjust the usage of protocol_b to avoid confusion.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-2-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When dealing with byte data use u8 instead of unsigned char or int.
Stop layering error handling in cypress_ps2_sendbyte() and simply
pass on error code from ps2_sendbyte().
Additionally use u8 instead of unisgned char throughout the code.
Link: https://lore.kernel.org/r/20240628224728.2180126-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not override errors reported by lower layers with generic "-1",
but propagate them to the callers. Change the checks for errors to be
in the form of "if (error)" to maintain consistency.
Link: https://lore.kernel.org/r/20240628224728.2180126-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop layering error handling in cypress_ps2_sendbyte() and simply
pass on error code from ps2_sendbyte() and use it in the callers.
This fixes mishandling of error condition in
cypress_ps2_read_cmd_status() which expects errors to be negative.
Reported-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://lore.kernel.org/r/20240628224728.2180126-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Casting an integer field containing desired rate to a pointer to bytes
works on little endian architectures where the driver is used, but not
a good practice. Use a temporary of proper type instead.
Link: https://lore.kernel.org/r/20240628224728.2180126-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
'devmodel' hasn't actually been used since:
'commit 3275158fa5 ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure interrupts are not left disabled when we fail to suspend the
touch controller.
Fixes: 6696777c65 ("Input: add driver for Elan I2C/SMbus touchpad")
Link: https://lore.kernel.org/r/ZmKiiL-1wzKrhqBj@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Allocating a contiguous buffer of 64K may fail if memory is sufficiently
fragmented, and may cause OOM kill of an unrelated process. However we
do not need to have contiguous memory. We also do not need to zero
out the buffer since it will be overwritten with firmware data.
Switch to using kvmalloc() instead of kzalloc().
Link: https://lore.kernel.org/r/20240609234757.610273-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use guard notation when acquiring mutex to
have it released automatically.
Link: https://lore.kernel.org/r/Zmkyvkr9AFyywy1V@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting additional functions found in the vendor version, such as long
onkey and GPIO integration.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240531175109.15599-5-balejk@matfyz.cz
Signed-off-by: Lee Jones <lee@kernel.org>
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.
The input driver provides the interface for control of
haptic effects through the device.
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-5-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
If the device is missing, we get the following error:
qt1050 3-0041: ID -1340767592 not supported
Let's handle this situation and print more informative error
when reading of CHIP_ID fails:
qt1050 3-0041: Failed to read chip ID: -6
Fixes: cbebf5adde ("Input: qt1050 - add Microchip AT42QT1050 support")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240617183018.916234-1-andrey.lalaev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- fixes for ili210x and elantech drivers
- new products IDs added to xpad controller driver
- a tweak to i8042 driver to always keep keyboard in Ayaneo Kun
handheld in raw mode
- populated "id_table" in ads7846 touchscreen driver to make sure
non-OF instantiated devices can properly determine the model data.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZnm3BgAKCRBAj56VGEWX
nBEoAP0U+pcUU4wFKM5XcLgtH6n5xjk6mll9baeW6o+vDg0PagD/c2jEHn+XYe9R
o4QMNEqJDs3TwTg3xHxiezfKB3eLdwo=
=yK5H
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fixes for ili210x and elantech drivers
- new products IDs added to xpad controller driver
- a tweak to i8042 driver to always keep keyboard in Ayaneo Kun
handheld in raw mode
- populated "id_table" in ads7846 touchscreen driver to make sure
non-OF instantiated devices can properly determine the model data.
* tag 'input-for-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ads7846 - use spi_device_id table
Input: xpad - add support for ASUS ROG RAIKIRI PRO
Input: ili210x - fix ili251x_read_touch_data() return value
Input: i8042 - add Ayaneo Kun to i8042 quirk table
Input: elantech - fix touchpad state on resume for Lenovo N24
As ft5426 seems to be compatible with this driver, add it.
Debug output during identification: Model "generic ft5x06 (79)", Rev. "
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240501204758.758537-3-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add handling of HSYNC signal emitted by the TI ADS7846 if it is hooked
up to a GPIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240430-gpio-leds-miscarm-v1-3-9c94d7711f6c@linaro.org
[dtor: dropped Spitz changes, kept platform data wait_for_sync option]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to allocate axes information separately from the main
joystick structure so let's fold the allocation and also drop members
(such as range, flat and fuzz) that are only used during initialization
of the device.
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/ZmkrgTlxNwm_oHxv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
