The SRQ in the hns driver consists of the following four parts:
* wqe buf: the buffer to store WQE.
* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
the wqe_idx corresponding to the idle WQE needs to be pushed into the
index queue which is a FIFO, then it instructs the hardware to obtain
the corresponding WQE.
* bitmap: bitmap is used to generate and release wqe_idx. When the user
has a new WR, the driver finds the idx of the idle wqe in bitmap. When
the CQE of wqe is generated, the driver will release the idx.
* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
to the user when poll_cq verb is invoked.
The process of post SRQ recv is refactored to make preceding code clearer.
Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.
Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().
Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the SRQ creation process into multiple steps and encapsulate them
into functions.
Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When creating or re-registering an MR, storing the PDN, access flag and
IOVA information ASAP can simplify the number of parameters passed into
the subsequent process.
Link: https://lore.kernel.org/r/1611395282-991-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the hns_roce_mtr_create() into serval small functions, remove unused
member in 'struct hns_roce_buf_attr' and delete unnecessary MTR page count
check flow to make the MTR creation related codes clearer.
Link: https://lore.kernel.org/r/1611395282-991-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_mr.c:1003: warning: Function parameter or member 'hr_dev' not described in 'hns_roce_mtr_create'
Link: https://lore.kernel.org/r/20210121094519.2044049-6-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Function parameter or member 'dereset' not described in 'hns_roce_v1_reset'
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Excess function parameter 'enable' description in 'hns_roce_v1_reset'
Link: https://lore.kernel.org/r/20210121094519.2044049-5-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Wei Hu <xavier.huwei@huawei.com>
Cc: Nenglong Zhao <zhaonenglong@hisilicon.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GFP_KERNEL may cause ida_alloc_range() to sleep, but the spinlock covering
this function is not allowed to sleep, so the spinlock needs to be changed
to mutex.
As there is a certain chance of memory allocation failure, GFP_ATOMIC is
not suitable for QP allocation scenarios.
Fixes: 71586dd200 ("RDMA/hns: Create QP with selected QPN for bank load balance")
Link: https://lore.kernel.org/r/1611048513-28663-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to improve performance by balancing the load between different
banks of cache, the CQC cache is desigend to choose one of 4 banks
according to lower 2 bits of CQN. The hns driver needs to count the number
of CQ on each bank and then assigns the CQ being created to the bank with
the minimum load first.
Link: https://lore.kernel.org/r/1610008589-35770-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This change fixes the checkpatch warning described in
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless so
do not encourage the use of %hh[xudi] or %h[xudi].
Link: https://lore.kernel.org/r/20201223193041.122850-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to get queue number repeatly for different queues from an
AEQE entity, as they are the same. Furthermore, redefine the AEQE
structure to make the codes more readable.
In addition, HNS_ROCE_EVENT_TYPE_CEQ_OVERFLOW is removed because the
hardware never reports this event.
Link: https://lore.kernel.org/r/1607650657-35992-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some %d in print format string should be %u, and some prints miss the
useful errno or are in nonstandard format. Just fix above issues.
Link: https://lore.kernel.org/r/1607650657-35992-11-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Types of some fields, variables and parameters of some functions should be
unsigned.
Link: https://lore.kernel.org/r/1607650657-35992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to initialize some variable because they will be assigned
with a value later.
Link: https://lore.kernel.org/r/1607650657-35992-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Just format the code without modifying anything, including fixing some
redundant and missing blanks and spaces and changing the variable
definition order.
Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As the qp access right is checked and setted in common function
hns_roce_v2_set_opt_fields(), there is no need to set again for a special
case INIT2INIT.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Fixes: 7db82697b8 ("RDMA/hns: Add support for extended atomic in userspace")
Link: https://lore.kernel.org/r/1607650657-35992-7-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the value of sl is larger than 7, if so, an
exception should be returned.
Link: https://lore.kernel.org/r/1607650657-35992-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Only the low 12 bits of vlan_id is valid, and service level has been
filled in Address Vector. So there is no need to fill sl in vlan_id in
Address Vector.
Fixes: 7406c0036f ("RDMA/hns: Only record vlan info for HIP08")
Link: https://lore.kernel.org/r/1607650657-35992-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The high 6 bits of traffic class in GRH is DSCP (Differentiated Services
Codepoint), the driver should shift it before the hardware gets it when
using RoCEv2.
Fixes: 606bf89e98 ("RDMA/hns: Refactor for hns_roce_v2_modify_qp function")
Fixes: fba429fcf9 ("RDMA/hns: Fix missing fields in address vector")
Link: https://lore.kernel.org/r/1607650657-35992-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whether to enable the these features should better depend on the enable
flags, not the value of related fields.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Fixes: 3cb2c996c9 ("RDMA/hns: Add support for SCCC in size of 64 Bytes")
Link: https://lore.kernel.org/r/1607650657-35992-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For ib_copy_from_user(), the length of udata may not be the same as that
of cmd. For ib_copy_to_user(), the length of udata may not be the same as
that of resp. So limit the length to prevent out-of-bounds read and write
operations from ib_copy_from_user() and ib_copy_to_user().
Fixes: de77503a59 ("RDMA/hns: RDMA/hns: Assign rq head pointer when enable rq record db")
Fixes: 633fb4d9fd ("RDMA/hns: Use structs to describe the uABI instead of opencoding")
Fixes: ae85bf92ef ("RDMA/hns: Optimize qp param setup flow")
Fixes: 6fd610c573 ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Fixes: 9d9d4ff788 ("RDMA/hns: Update the kernel header file of hns")
Link: https://lore.kernel.org/r/1607650657-35992-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These flags will be returned to the userspace through ABI, so they should
be defined in hns-abi.h. Furthermore, there is no need to include
hns-abi.h in every source files, it just needs to be included in the
common header file.
Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5 has an ugly flow where it tries to allocate a new MR and replace the
existing MR in the same memory during rereg. This is very complicated and
buggy. Instead of trying to replace in-place inside the driver, provide
support from uverbs to change the entire HW object assigned to a handle
during rereg_mr.
Since destroying a MR is allowed to fail (ie if a MW is pointing at it)
and can't be detected in advance, the algorithm creates a completely new
uobject to hold the new MR and swaps the IDR entries of the two objects.
The old MR in the temporary IDR entry is destroyed, and if it fails
rereg_mr succeeds and destruction is deferred to FD release. This
complexity is why this cannot live in a driver safely.
Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable 'cnt' is used to represent the max number of sge an SQ WQE
can use at first, then it means how many extended sge an SQ has. In
addition, this function has no need to return a value. So refactor and
encapsulate the parts of getting number of extended sge a WQE can use to
make it easier to understand.
Link: https://lore.kernel.org/r/1606558959-48510-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Page alignment is required when setting the number of extended sge
according to the hardware's achivement. If the space of needed extended
sge is greater than one page, the roundup_pow_of_two() can ensure
that. But if the needed extended sge isn't 0 and can not be filled in a
whole page, the driver should align it specifically.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1606558959-48510-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One RC SQ WQE can store 2 sges but UD can't, so ignore 2 valid sges of
wr.sglist for RC which have been filled in WQE before setting extended
sge. Either of RC and UD can not contain 0-length sges, so these 0-length
sges should be skipped.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1606558959-48510-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. QPs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. CQs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to improve performance by balancing the load between different
banks of cache, the QPC cache is desigend to choose one of 8 banks
according to lower 3 bits of QPN. The hns driver needs to count the number
of QP on each bank and then assigns the QP being created to the bank with
the minimum load first.
Link: https://lore.kernel.org/r/1606220649-1465-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The loopback flag will be set to 1 by the hardware when the source mac
address is same as the destination mac address. So the driver don't need
to compare them.
Fixes: d6a3627e31 ("RDMA/hns: Optimize wqe buffer set flow for post send")
Link: https://lore.kernel.org/r/1605526408-6936-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Traffic class and hop limit in address vector is not assigned from GRH,
but it will be filled into UD SQ WQE. So the hardware will get a wrong
value.
Fixes: 82e620d9c3 ("RDMA/hns: Modify the data structure of hns_roce_av")
Link: https://lore.kernel.org/r/1605526408-6936-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a memory window is bound to a memory region, the local write access
should be set for its mtpt table.
Fixes: c7c2819140 ("RDMA/hns: Add MW support for hip08")
Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The maximum number of retransmission should be returned when querying QP,
not the value of retransmission counter.
Fixes: 99fcf82521 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp")
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a group of flags to control the 'struct hns_roce_buf' allocation
flow, this is used to support the caller running in atomic context.
Link: https://lore.kernel.org/r/1605347916-15964-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A return statement is omitted after getting HEM table, then the newly
allocated pointer will be freed directly, which will cause a calltrace
when the driver was removed.
Fixes: d6d91e4621 ("RDMA/hns: Add support for configuring GMV table")
Link: https://lore.kernel.org/r/1605180582-46504-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above
source address information is stored as an entry in GMV table. The users
just need to provide the index to the hardware when POST SEND.
Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The
driver needs to allocate memory for it and tell the information about this
region to hardware.
Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The doorbell needs to store PI information into QPC, so the RoCEE should
wait for the results of storing, that is, it needs two bus operations to
complete a doorbell. When ROCEE is in SDI mode, multiple doorbells may be
interlocked because the RoCEE can only handle bus operations serially. So a
flag to mark if HIP09 is working in SDI mode is added. When the SDI flag is
set, the ROCEE will ignore the PI information of the doorbell, continue to
fetch wqe and verify its validity by it's owner_bit.
Link: https://lore.kernel.org/r/1603195493-22741-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allowing userspace to invoke these commands is probably going to crash
these drivers as they are not tested and not expecting to use them on a
user object.
For example pvrdma touches cq->ring_state which is not initialized for
user QPs.
These commands are effected:
- IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in
rdma-core, only hfi1, ipath and rxe calls it.
- IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only
ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in
rdma-core, only ipath and hfi1 call them.
- IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in
rdma-core, only ipath and hfi1 calls it.
- IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere
- IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in
rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call
it.
Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the QP attrs create_flags is supported.
Unfortuantely when create_flags was added to the QP attrs the drivers were
not updated. uverbs_ex_cmd_mask was used to block it - even though kernel
drivers use these flags too.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code
to be EOPNOTSUPP.
Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that the CQ attrs is supported. Unfortuantely
when flags was added to the CQ attrs the drivers were not updated,
uverbs_ex_cmd_mask was used to block it. This was missed when create CQ
was converted to ioctl, so non-zero flags could have been passed into
drivers.
Check that flags is zero in all drivers that don't use it, remove
IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask.
Fixes: 41b2a71fc8 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file")
Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.
Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
uverbs was blocking srq_types the driver doesn't support based on the
CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types
during create_srq and move CREATE_XSRQ to the core code.
Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions all depend on the driver providing a specific op:
- REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op
- ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this
without providing the op
- OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides
xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow.
- OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd()
- CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq()
- QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but
sometimes supplies a NULL op.
- RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op
- ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an
(now deleted) implementation but no userspace
All drivers were checked that no drivers provide the op without also
setting uverbs_cmd_mask so this should have no functional change.
Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since a while now the uverbs layer checks if the driver implements a
function before allowing the ucmd to proceed. This largely obsoletes the
cmd_mask stuff, but there is some tricky bits in drivers preventing it
from being removed.
Remove the easy elements of uverbs_ex_cmd_mask by pre-setting them in the
core code. These are triggered soley based on the related ops function
pointer.
query_device_ex is not triggered based on an op, but all drivers already
implement something compatible with the extension, so enable it globally
too.
Link: https://lore.kernel.org/r/2-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some code was removed but the variables were still there, and some
parameters have been changed to be queried from firmware. So the
definitions of them are no longer needed.
Fixes: 2a3d923f87 ("RDMA/hns: Replace magic numbers with #defines")
Fixes: 82e620d9c3 ("RDMA/hns: Modify the data structure of hns_roce_av")
Fixes: 8254746978 ("IB/hns: Implement the add_gid/del_gid and optimize the GIDs management")
Fixes: 21b97f5387 ("RDMA/hns: Fixup qp release bug")
Link: https://lore.kernel.org/r/1601371934-40003-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP can't be created from the user space, hence the udata check is
always false (udata == NULL). Remove that check and simplify the flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.
Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hardware will add AckReq flag in BTH header according to the value of
ack_req_freq to request ACK from responder for the packets with this flag.
It should be greater than or equal to lp_pktn_ini instead of using a fixed
value.
Fixes: 7b9bd73ed1 ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
Link: https://lore.kernel.org/r/1600509802-44382-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB
and hop_num is 2. It is because that all variables involved in calculation
are defined in type of int. So change the type of bt_chunk_size,
buf_chunk_size and obj_per_chunk_default to u64.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1600509802-44382-6-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 doesn't support modifying the maximum number of outstanding WR in an
SRQ. However, the driver does not return a failure message, and users may
mistakenly think that the resizing is executed successfully. So the driver
needs to intercept this operation.
Fixes: ffb1308b88 ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1600509802-44382-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB specifications, the verbs should return an immediate
error when the users set an unsupported opcode. Furthermore, refactor codes
about opcode in process of post_send to make the difference between opcodes
clearer.
Link: https://lore.kernel.org/r/1600509802-44382-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.
Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.
Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.
Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using CEQE in size of 4B or 64B, AEQE in
size of 16B or 64B. The performance of bus can be improved by using larger
size of EQE.
Link: https://lore.kernel.org/r/1600245806-56321-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to
an invalid value instead of being left uninitialized.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Fixes: a2f3d4479f ("RDMA/hns: Avoid unncessary initialization")
Link: https://lore.kernel.org/r/1600350615-115217-1-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.
Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mtr_umem_page_count() does the same thing, replace it with the core code.
Also, ib_umem_find_best_pgsz() should always be called to check that the
umem meets the page_size requirement. If there is a limited set of
page_sizes that work it the pgsz_bitmap should be set to that set. 0 is a
failure and the umem cannot be used.
Lightly tidy the control flow to implement this flow properly.
Link: https://lore.kernel.org/r/12-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This helper does the same as rdma_for_each_block(), except it works on a
umem. This simplifies most of the call sites.
Link: https://lore.kernel.org/r/4-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc3' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The UDP source port number in RoCE v2 is used to create entropy for
network routers (ECMP), load balancers and 802.3ad link aggregation
switching that are not aware of RoCE IB headers. Considering that the IB
core has achieved a new interface to get a hashed value of it, the fixed
value of it in QPC and UD WQE in hns driver could be fixed and the port
number is to be set dynamically now.
For QPC of RC, the value could be hashed from flow_lable if the user pass
it in or from remote qpn and local qpn. For WQE of UD, it is set according
to fl or as a random value.
Link: https://lore.kernel.org/r/1598002289-8611-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It should be considered an illegal operation if the ULP attempts to modify
a QP from another state to the current hardware state. Otherwise, the ULP
can modify some fields of QPC at any time. For example, for a QP in state
of RTS, modify it from RTR to RTS can change the PSN, which is always not
as expected.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1598353674-24270-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.
This reverts commit 711195e57d.
Fixes: 711195e57d ("RDMA/hns: Reserve one sge in order to avoid local length error")
Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Smaller set of RDMA updates. A smaller number of 'big topics' with the
majority of changes being driver updates.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob for
device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it off.
Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of a
device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed
-----BEGIN PGP SIGNATURE-----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=0z2L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
If the hns ROCEE reports a general error CQE (types not specified by the IB
General Specifications), it's no need to change the QP state to error, and
the driver should just skip it.
Fixes: 7c044adca2 ("RDMA/hns: Simplify the cqe code of poll cq")
Link: https://lore.kernel.org/r/1595932941-40613-8-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One qp state migrations legal configuration was deleted mistakenly.
Fixes: 357f342946 ("RDMA/hns: Simplify the state judgment code of qp")
Link: https://lore.kernel.org/r/1595932941-40613-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hns_roce_cmq_setup_basic_desc() can clear the whole desc, so removes
these redundant memset operations.
Link: https://lore.kernel.org/r/1595932941-40613-6-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are some functions called by set_rc_wqe() use two parameters:
"void *wqe" and "struct hns_roce_v2_rc_send_wqe *rc_sq_wqe", but the first
one can be got from the second one. So remove the redundant wqe from
related functions.
Link: https://lore.kernel.org/r/1595932941-40613-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08_A is an temporary version and all features of it are supported by
HIP08_B. So remove the relevant code.
Link: https://lore.kernel.org/r/1595932941-40613-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parts about preparing and sending mailbox to hardware is not strongly
related to other codes in hns_roce_v2_set_hem(), and can be encapsulated
into a separate function.
Link: https://lore.kernel.org/r/1595932941-40613-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HNS_ROCE_SQ_OPCODE_XXXs and HNS_ROCE_V2_WQE_OP_XXXs have same values, so
remove a set of redundant definitions. In addition, remove the suffix of
HNS_ROCE_V2_WQE_OP_BIND_MW_TYPE.
Link: https://lore.kernel.org/r/1595932941-40613-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first
page, the actual PA corresponding to the MR's VA is equal to MR's PA plus
this offset. The first PA in PBL has already been aligned to PAGE_SIZE
after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size
is smaller than the PAGE_SIZE, this will lead the HW to access the wrong
memory because the offset is smaller than expected.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:
1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB
But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.
Fixes: b713128de7 ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If hns ROCEE is set to level-0 addressing, the length of the entire buffer
can be used as the page size. The driver needn't to split the buffer into
small units because all pages are continuous.
Link: https://lore.kernel.org/r/1593525696-12570-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocating an MR flow can only be initiated by kernel users, and not from
userspace so a udata parameter is redundant.
Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a CQ, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-6-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a IMP reset caused by some hardware errors and hns RoCE driver reset
occurred at the same time, there is a possiblity that the IMP will stop
dealing with command and users can't use the hardware. The logs are as
follows:
hns3 0000:fd:00.1: cleaned 0, need to clean 1
hns3 0000:fd:00.1: firmware version query failed -11
hns3 0000:fd:00.1: Cmd queue init failed
hns3 0000:fd:00.1: Upgrade reset level
hns3 0000:fd:00.1: global reset interrupt
The hns NIC driver divides the reset process into 3 status:
initialization, hardware resetting and softwaring restting. RoCE driver
gets reset status by interfaces provided by NIC driver and commands will
not be sent to the IMP if the driver is in any above status. The main
reason for this issue is that there is a time gap between status 1 and 2,
if the RoCE driver sends commands to the IMP during this gap, the IMP will
stop working because it is not ready.
To eliminate the time gap, the hns NIC driver has added a new interface in
commit a4de02287a ("net: hns3: provide .get_cmdq_stat interface for the
client"), so RoCE driver can ensure that no commands will be sent during
resetting.
Link: https://lore.kernel.org/r/1592314778-52822-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ibmr.device is assigned after MR is successfully registered, but both
write_mtpt() and frmr_write_mtpt() accesses it during the mr registration
process, which may cause the following error when trying to register MR in
userspace and pbl_hop_num is set to 0.
pc : hns_roce_mtr_find+0xa0/0x200 [hns_roce]
lr : set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2]
sp : ffff00023e73ba20
x29: ffff00023e73ba20 x28: ffff00023e73bad8
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000002 x24: 0000000000000000
x23: ffff00023e73bad0 x22: 0000000000000000
x21: ffff0000094d9000 x20: 0000000000000000
x19: ffff8020a6bdb2c0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0140000000000000 x12: 0040000000000041
x11: ffff000240000000 x10: 0000000000001000
x9 : 0000000000000000 x8 : ffff802fb7558480
x7 : ffff802fb7558480 x6 : 000000000003483d
x5 : ffff00023e73bad0 x4 : 0000000000000002
x3 : ffff00023e73bad8 x2 : 0000000000000000
x1 : 0000000000000000 x0 : ffff0000094d9708
Call trace:
hns_roce_mtr_find+0xa0/0x200 [hns_roce]
set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2]
hns_roce_v2_write_mtpt+0x14c/0x168 [hns_roce_hw_v2]
hns_roce_mr_enable+0x6c/0x148 [hns_roce]
hns_roce_reg_user_mr+0xd8/0x130 [hns_roce]
ib_uverbs_reg_mr+0x14c/0x2e0 [ib_uverbs]
ib_uverbs_write+0x27c/0x3e8 [ib_uverbs]
__vfs_write+0x60/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
Solve above issue by adding a pointer of structure hns_roce_dev as a
parameter of write_mtpt() and frmr_write_mtpt(), so that both of these
functions can access it before finishing MR's registration.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1592314629-51715-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The "dmac" variable is used before it is initialized.
Fixes: 494c3b3122 ("RDMA/hns: Refactor the QP context filling process related to WQE buffer configure")
Link: https://lore.kernel.org/r/20200529083918.GA1298465@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pointer raq is being assigned twice. Fix this by removing one of the
redundant assignments.
Fixes: 14ba87304b ("RDMA/hns: Remove redundant type cast for general pointers")
Link: https://lore.kernel.org/r/20200528150427.420624-1-colin.king@canonical.com
Addressses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of i with the sge number of wr will make the comparision more
clear, that is, when the sge number in wr is small than the maximum
supported sge number in the queue, then a stop sge needed to be filled at
the end of sges in wr.
Link: https://lore.kernel.org/r/1590152579-32364-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The redundant parameters "hr_dev" need to be removed from
free_kernel_wrid() and free_srq_wrid().
Link: https://lore.kernel.org/r/1590152579-32364-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to do a type cast on genernal pointers, they could be
assigned to any type of variables. In addition, optimize initialization of
some variables and adjust order of them.
Link: https://lore.kernel.org/r/1590152579-32364-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the MTR region is configed before hns_roce_mtr_map() is
invoked, but in some scenarios, the region is configed at MTR creation,
the caller need to store this config and call hns_roce_mtr_map() later. So
optimize the usage by wrapping the MTR region config into MTR.
Link: https://lore.kernel.org/r/1589982799-28728-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Split the code related to WQE buffer configure from the QPC filling
process into two functions: config_qp_sq_buf() and config_qp_rq_buf(),
this will make the code more readable.
Link: https://lore.kernel.org/r/1589982799-28728-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's easier to understand and maintain enable flags of cq using a single
field in type of u32 than defining a field for every flags in the
structure hns_roce_cq, and we can add new flags for features more
conveniently in the future.
Link: https://lore.kernel.org/r/1589982799-28728-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hardware can truncate PI/CI when posting or polling, the driver does
not need to do truncation. Therefore keep the software's PI/CI consistent
with it in the hardware.
Link: https://lore.kernel.org/r/1589982799-28728-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.
Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
srq_context is a local variables and is only used to get some fields from
buffer of mailbox. It's meaningless to copy mailbox's buffer's contents
back to it.
Link: https://lore.kernel.org/r/1588931159-56875-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The length information should be stored in the struct ib_mr object,
otherwise the length value of a valid mr object would always be 0.
Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For ilog2(x), if x is 0 and not a constant variable, it will return
-1. And there will be an error as below:
hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2
So modify to_hr_hem_entries_shift() to return 0 if conut is 0.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When allocating eq buffer, the size of base address page should be defined
by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz.
Fixes: 477a0a3870 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer")
Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's easier to understand and maintain enable flags of qp using a single
field in type of unsigned long than defining a field for every flags in
the structure hns_roce_qp, and we can add new flags for features more
conveniently in the future.
Link: https://lore.kernel.org/r/1588674607-25337-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These caps are assigned in query_pf_caps() or set_default_caps(), and
should not be assigned out of these two functions.
Link: https://lore.kernel.org/r/1588242691-12913-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
lp_pktn_ini means the number of loopback slice packets for long messages,
it should depend on MTU(fixed to 4096B currently) and max size of SQ
inline.
Link: https://lore.kernel.org/r/1588242691-12913-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a comments with some chinese semicolons that cause encoding
issues each time hns_roc_hw_v2.h was modified from a IDE. So fix this by
using correct symbols.
Link: https://lore.kernel.org/r/1588242691-12913-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Optimize the SRQ's WQE buffer parameters calculating process to make the
codes more readable by using new functions about multi-hop addressing to
calculating capabilities of SRQ.
Link: https://lore.kernel.org/r/1588071823-40200-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just move the SRQ related code to more reasonable place, and unify format
of some prints.
Link: https://lore.kernel.org/r/1588071823-40200-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Optimize the QP's WQE buffer parameters calculating process to make the
codes more readable mainly by merging calculation of extended sge space of
kernel and userspace. In addition, add some inline functions to simply
codes about multi-hop addressing.
Link: https://lore.kernel.org/r/1588071823-40200-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping. Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.
Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.
Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate codes to get status of cqe into a function and use map table
instead of switch-case to reduce cyclomatic complexity of
hns_roce_v2_poll_one().
Link: https://lore.kernel.org/r/1586938475-37049-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Removes the unnecessary memset opertaion and adjust style of some lines in
hns_roce_v2_set_mac().
Link: https://lore.kernel.org/r/1586938475-37049-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the unnecessary memset operation and adjust style of some lines in
hns_roce_config_link_table().
Link: https://lore.kernel.org/r/1586938475-37049-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the zero hop addressing support by using mtr interface for CQE buffer,
so the hns driver can support addressing hopnum between 0 to 3 for CQE.
Link: https://lore.kernel.org/r/1586779091-51410-7-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the zero hop addressing support by using mtr interface for SRQ buffer,
so the hns driver can support addressing hopnum between 0 to 3 for SRQ.
Link: https://lore.kernel.org/r/1586779091-51410-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the zero hop addressing support by using new mtr interface for WQE
buffer and simple mtr invoking process, so WQE buffer can support hopnum
between 0 to 3.
Link: https://lore.kernel.org/r/1586779091-51410-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the new mtr interface to simple the hop 0 addressing and multihop
addressing process.
Link: https://lore.kernel.org/r/1586779091-51410-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the value of nbufs is 1, the buffer is in direct mode, which may cause
confusion. So optimizes current codes to make it easier to maintain and
understand.
Link: https://lore.kernel.org/r/1586779091-51410-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, WQE and EQE table have already used the mtr interface to config
and access memory by multi-hop addressing when hopnum is from 1 to 3. But
if hopnum is 0, each table need write its own but repetitive logic, and
many duplicate code exists in the mtr interfaces invoke process.
So wraps the public logic as 3 functions: hns_roce_mtr_create(),
hns_roce_mtr_destroy() and hns_roce_mtr_map() to support hopnum ranges from
0 to 3. In addition, makes the mtr interfaces easier to use.
Link: https://lore.kernel.org/r/1586779091-51410-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a potential execution path in which variable *ret* is returned
without being properly initialized, previously.
Fix this by initializing variable *ret* to 0.
Link: https://lore.kernel.org/r/20200328023539.GA32016@embeddedor
Addresses-Coverity-ID: 1491917 ("Uninitialized scalar variable")
Fixes: 2f49de21f3 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just reduce the default number to 64 for backward compatibility, the
driver can still get this configuration from the firmware.
Link: https://lore.kernel.org/r/1585194018-4381-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The original value means sending 16 packets at a time, and it should be
configured to 0 which means sending 1 packet instead. It is modified to
reduce the number of PFC frames to make sure the performance meets
expectations when flow control is enabled on hip08.
Link: https://lore.kernel.org/r/1585194018-4381-2-git-send-email-liweihang@huawei.com
Signed-off-by: Jihua Tao <taojihua4@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The field smac in ib_wc was used for create AH and then it will be treated
as destination mac address in UD sqwqe, but related code about filling smac
into AH has been removed in core. Actually, the dmac in UD sqwqe is parsed
from the dgid in grh which is passed in by ULP now, so this assignment
should be removed.
Link: https://lore.kernel.org/r/1584674622-52773-10-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Before calling modify_qp_reset_to_init(), the entire qpc mask has been
cleared, so it is no longer necessary to clear the specific fields in the
mask.
Link: https://lore.kernel.org/r/1584674622-52773-9-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ceq and aeq is a ring buffer, consumer index of them will be set to zero
after reaching the maximum value. The warning should be removed or it may
mislead the users.
Link: https://lore.kernel.org/r/1584674622-52773-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The capbilities of hardware should be got at first and then used in
hns_roce_alloc_vf_resource(). Also removes an unnecessary if ... else
condition in it.
Link: https://lore.kernel.org/r/1584674622-52773-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use ibdev_err/dbg/warn() instead of dev_err/dbg/warn(), and modify some
prints into format of "failed to do something, ret = n".
Link: https://lore.kernel.org/r/1584674622-52773-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Optimizes hns_roce_table_mhop_get() by encapsulating code about clearing
hem into clear_mhop_hem(), which will make the code flow clearer.
Link: https://lore.kernel.org/r/1584417324-2255-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Depth of qp shouldn't be allowed to be set to zero, after ensuring that,
subsequent process can be simplified. And when qp is changed from reset to
reset, the capability of minimum qp depth was used to identify hardware of
hip06, it should be changed into a more readable form.
Link: https://lore.kernel.org/r/1584006624-11846-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Splits hns_roce_v2_post_send() into three sub-functions: set_rc_wqe(),
set_ud_wqe() and update_sq_db() to simplify the code.
Link: https://lore.kernel.org/r/1583839084-31579-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, before the qp is created, a page size needs to be calculated
for the base address table to store all base addresses in the mtr. As a
result, the parameter configuration of the mtr is complex. So integrate
the process of calculating the base table page size into the hem related
interface to simplify the process of using mtr.
Link: https://lore.kernel.org/r/1583839084-31579-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify the wr opcode conversion from ib to hns by using a map table
instead of the switch-case statement.
Link: https://lore.kernel.org/r/1583839084-31579-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulates the wqe buffer process details for datagram seg, fast mr seg
and atomic seg.
Link: https://lore.kernel.org/r/1583839084-31579-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are serval global functions related to wqe buffer in the hns driver
and are called in different files. These symbols cannot directly represent
the namespace they belong to. So add prefix 'hns_roce_' to 3 wqe buffer
related global functions: get_recv_wqe(), get_send_wqe(), and
get_send_extend_sge().
Link: https://lore.kernel.org/r/1583839084-31579-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These judgments were used to keep the compatibility with older versions of
userspace that don't have the field named "cap_flags" in structure
hns_roce_ib_create_cq_resp. But it will be wrong to compare outlen with
the size of resp if another new field were added in resp. oulen should be
compared with the end offset of cap_flags in resp.
Fixes: 4f8f0d5e33 ("RDMA/hns: Package the flow of creating cq")
Link: https://lore.kernel.org/r/1583845569-47257-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when the requested QP type is
not supported by the provider.
Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate the kernel qp doorbell allocation related code into 2
functions: alloc_qp_db() and free_qp_db().
Link: https://lore.kernel.org/r/1582526258-13825-8-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate the kernel qp wrid allocation related code into 2 functions:
alloc_kernel_wrid() and free_kernel_wrid().
Link: https://lore.kernel.org/r/1582526258-13825-7-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate qp buffer allocation related code into 3 functions:
alloc_qp_buf(), map_wqe_buf() and free_qp_buf().
Link: https://lore.kernel.org/r/1582526258-13825-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate the code associated with the qp number assignment into
alloc_qpn() and free_qpn().
Link: https://lore.kernel.org/r/1582526258-13825-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Rename the qp context related functions and adjusts the code location to
distinguish between the qp context and the entire qp.
Link: https://lore.kernel.org/r/1582526258-13825-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wrap the duplicate code in hip08 and hip06 qp destruction process as
hns_roce_qp_destroy() to simply the qp destroy flow.
Link: https://lore.kernel.org/r/1582526258-13825-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are two paths to update qp producer index into hardware now, one
path is doorbell in post verbs (send and recv), the another is mailbox in
modify qp verb which is called by flush process. This will lead the
hardware to be broken to correctly generate flush cqe. With stopping
doorbell update and holding qp spinlock in modify qp during flush process,
the problem can be solved.
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1582367158-27030-3-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set revisions that equal to or higher than HIP08_B as default to maintain
backward compatibility.
Link: https://lore.kernel.org/r/1582363039-10714-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason. To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive
etc[1], flush needs to be performed from the driver.
The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.
Suggested Solution: we have proposed to defer the flushing of the QP in
the Errored state using the workqueue to get around with the limitation of
our hardware.
This patch specifically adds the calls to the flush handler from where
parts of the code like post_send/post_recv etc. when the QP state gets
into the errored mode.
[1] https://patchwork.kernel.org/patch/10534271/
Link: https://lore.kernel.org/r/1580983005-13899-3-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason. To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive etc
[1], flush needs to be performed from the driver.
The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.
Suggested Solution:
we have proposed to defer the flushing of the QP in the Errored state
using the workqueue to get around with the limitation of our hardware.
This patch adds the framework of the workqueue and the flush handler
function.
[1] https://patchwork.kernel.org/patch/10534271/
Link: https://lore.kernel.org/r/1580983005-13899-2-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The eqe has a private multi-hop addressing implementation, but there is
already a set of interfaces in the hns driver that can achieve this.
So, simplify the eqe buffer allocation process by using the mtr interface
and remove large amount of repeated logic.
Link: https://lore.kernel.org/r/20200126145835.11368-1-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some magic numbers are hard to understand, so replace them with macros or
add some comments for them.
Link: https://lore.kernel.org/r/20200126145504.9700-1-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCXiVO8AAKCRAp8NhrnBAZ
scTrAP9gb0d3qv0IOtHw5aGI1DAgjTUn/SzUOnsjDEn7DIoh9gEA2+ZmaEyLXKrl
+UcZb31auy5P8ueJYokRLhLAyRcOIAg=
=yaHb
-----END PGP SIGNATURE-----
Merge tag 'rds-odp-for-5.5' into rdma.git for-next
From https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma
Leon Romanovsky says:
====================
Use ODP MRs for kernel ULPs
The following series extends MR creation routines to allow creation of
user MRs through kernel ULPs as a proxy. The immediate use case is to
allow RDS to work over FS-DAX, which requires ODP (on-demand-paging)
MRs to be created and such MRs were not possible to create prior this
series.
The first part of this patchset extends RDMA to have special verb
ib_reg_user_mr(). The common use case that uses this function is a
userspace application that allocates memory for HCA access but the
responsibility to register the memory at the HCA is on an kernel ULP.
This ULP acts as an agent for the userspace application.
The second part provides advise MR functionality for ULPs. This is
integral part of ODP flows and used to trigger pagefaults in advance
to prepare memory before running working set.
The third part is actual user of those in-kernel APIs.
====================
* tag 'rds-odp-for-5.5':
net/rds: Use prefetch for On-Demand-Paging MR
net/rds: Handle ODP mr registration/unregistration
net/rds: Detect need of On-Demand-Paging memory registration
RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths
IB/mlx5: Mask out unsupported ODP capabilities for kernel QPs
RDMA/mlx5: Don't fake udata for kernel path
IB/mlx5: Add ODP WQE handlers for kernel QPs
IB/core: Add interface to advise_mr for kernel users
IB/core: Introduce ib_reg_user_mr
IB: Allow calls to ib_umem_get from kernel ULPs
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.
This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
To support extended atomic operations including cmp & swap and fetch & add
of 8 bytes, 16 bytes, 32 bytes, 64 bytes in userspace, some field in qpc
should be configured.
Link: https://lore.kernel.org/r/1579052546-11746-1-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Get pf capabilities from firmware according to different hardwares, if it
fails, all capabilities will be set with a default value.
Link: https://lore.kernel.org/r/1578738761-3176-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pf capabilities are set by default for hip08 previously which should
depends on different types of hardware. So add new interfaces to get them
from firmware.
Link: https://lore.kernel.org/r/1578738761-3176-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and
max_srqs has the same effect with num_srqs. So remove them from this
structrue.
Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hardware is in resetting stage, we may can't poll back all the
expected work completions as the hardware won't generate cqe anymore.
This patch allows the driver to compose the expected wc instead of the
hardware during resetting stage. Once the hardware finished resetting, we
can poll cq from hardware again.
Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Driver should first check whether the sge is valid, then fill the valid
sge and the caculated total into hardware, otherwise invalid sges will
cause an error.
Fixes: 52e3b42a2f ("RDMA/hns: Filter for zero length of sge in hip08 kernel mode")
Fixes: 7bdee4158b ("RDMA/hns: Fill sq wqe context of ud type in hip08")
Link: https://lore.kernel.org/r/1578571852-13704-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix some coding style issuses without changing logic of codes, most of the
modification is unreasonable line breaks and alignments.
Link: https://lore.kernel.org/r/1578313276-29080-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are already necessary prints in outer function, prints in
hns_roce_function_clear() may confuse users. So these prints is removed.
Link: https://lore.kernel.org/r/1578313276-29080-6-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current state and new state of qp won't be configured when modifying qp,
so these two redundant parameters should be removed.
Link: https://lore.kernel.org/r/1578313276-29080-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The values used to represent service type of RC and UD should be
interchanged according to design of hardware. And it's better to define
these types in enumeration than macros.
Link: https://lore.kernel.org/r/1578313276-29080-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hns_roce_init_eq_table() is an unused function that only retains its
declaration in driver.
Link: https://lore.kernel.org/r/1578313276-29080-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the wqe idx is calculated repeatly everywhere it is used. This
patch defines wqe_idx and calculated it only once, then just use it as
needed.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mainly a collection of smaller of driver updates this cycle.
- Various driver updates and bug fixes for siw, bnxt_re, hns, qedr,
iw_cxgb4, vmw_pvrdma, mlx5
- Improvements in SRPT from working with iWarp
- SRIOV VF support for bnxt_re
- Skeleton kernel-doc files for drivers/infiniband
- User visible counters for events related to ODP
- Common code for tracking of mmap lifetimes so that drivers can link HW
object liftime to a VMA
- ODP bug fixes and rework
- RDMA READ support for efa
- Removal of the very old cxgb3 driver
-----BEGIN PGP SIGNATURE-----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=UV2u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Again another fairly quiet cycle with few notable core code changes
and the usual variety of driver bug fixes and small improvements.
- Various driver updates and bug fixes for siw, bnxt_re, hns, qedr,
iw_cxgb4, vmw_pvrdma, mlx5
- Improvements in SRPT from working with iWarp
- SRIOV VF support for bnxt_re
- Skeleton kernel-doc files for drivers/infiniband
- User visible counters for events related to ODP
- Common code for tracking of mmap lifetimes so that drivers can link
HW object liftime to a VMA
- ODP bug fixes and rework
- RDMA READ support for efa
- Removal of the very old cxgb3 driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits)
RDMA/hns: Delete unnecessary callback functions for cq
RDMA/hns: Rename the functions used inside creating cq
RDMA/hns: Redefine the member of hns_roce_cq struct
RDMA/hns: Redefine interfaces used in creating cq
RDMA/efa: Expose RDMA read related attributes
RDMA/efa: Support remote read access in MR registration
RDMA/efa: Store network attributes in device attributes
IB/hfi1: remove redundant assignment to variable ret
RDMA/bnxt_re: Fix missing le16_to_cpu
RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices
RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series
RDMA/bnxt_re: Fix Kconfig indentation
IB/mlx5: Implement callbacks for getting VFs GUID attributes
IB/ipoib: Add ndo operation for getting VFs GUID attributes
IB/core: Add interfaces to get VF node and port GUIDs
net/core: Add support for getting VF GUIDs
RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset
RDMA/cm: Use refcount_t type for refcount variable
IB/mlx5: Support extended number of strides for Striding RQ
IB/mlx4: Update HW GID table while adding vlan GID
...
Currently, when cq event occurred, we first call our own callback
functions in the event process function, then call ib callback
functions. Actually, we can directly call ib callback functions.
Link: https://lore.kernel.org/r/1574044493-46984-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current names of functions are not proper, such as hns_roce_free_cq,
actually it means free cqc, thus we rename them. Furthermore, functions
used inside one file can be named without the prefix hns_roce_ which will
make the functions for verbs symbols more eye-catching.
Link: https://lore.kernel.org/r/1574044493-46984-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to package buf and mtt into hns_roce_cq_buf, which will
make code more complex, just delete this struct and move buf and mtt into
hns_roce_cq. Furthermore, we add size member for hns_roce_buf to avoid
repeatly calculating where needed it.
Link: https://lore.kernel.org/r/1574044493-46984-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some interfaces defined with unnecessary input parameters, such as "nent"
and "vector". This patch redefined these interfaces to make the code more
readable and simple.
Link: https://lore.kernel.org/r/1574044493-46984-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The argument is always ignored, so remove it.
Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Modify some printings that is not in uniformed style, non-standard or with
spelling errors.
Link: https://lore.kernel.org/r/1572952082-6681-10-git-send-email-liweihang@hisilicon.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is better to return a linux error code than define a private constant.
Link: https://lore.kernel.org/r/1572952082-6681-9-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge base configuration of hr_dev into hns_roce_hw_v2_get_cfg(). In
addition, there is no need to return 0 at last, so we change return type
of it to void.
Link: https://lore.kernel.org/r/1572952082-6681-8-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.
Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uar information is already recorded in priv_uar of hns_roce_dev, there
is no need to record it in hns_roce_cq again.
Link: https://lore.kernel.org/r/1572952082-6681-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Special QP have no differences with normal qp in data structure, so
definition of struct hns_roce_sqp should be removed and replaced by struct
hns_roce_qp.
Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
srq_desc_size should be rounded up to pow of two before used, or related
calculation may cause allocating wrong size of memory for srq buffer.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1572575610-52530-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Size of pointer to buf field of struct hns_roce_hem_chunk should be
considered when calculating HNS_ROCE_HEM_CHUNK_LEN, or sg table size will
be larger than expected when allocating hem.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1572575610-52530-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Sirong Wang <wangsirong@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20191028155931.1114-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_user_mmap_io interface created a common interface for drivers to
correctly map hw resources and zap them once the ucontext is destroyed
enabling the drivers to safely free the hw resources.
However, this meant the drivers need to delay freeing the resource to the
ucontext destroy phase to ensure they were no longer mapped. The new
mechanism for a common way of handling user/driver address mapping enabled
notifying the driver if all umap_priv mappings were removed, and enabled
freeing the hw resources when they are done with and not delay it until
ucontext destroy.
Since not all drivers use the mechanism, NULL can be sent to the
rdma_user_mmap_io interface to continue working as before. Drivers that
use the mmap_xa interface can pass the entry being mapped to the
rdma_user_mmap_io function to be linked together.
Link: https://lore.kernel.org/r/20191030094417.16866-4-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is not the first attempt to fix building random configurations,
unfortunately the attempt in commit a07fc0bb48 ("RDMA/hns: Fix build
error") caused a new problem when CONFIG_INFINIBAND_HNS_HIP06=m and
CONFIG_INFINIBAND_HNS_HIP08=y:
drivers/infiniband/hw/hns/hns_roce_main.o:(.rodata+0xe60): undefined reference to `__this_module'
Revert commits a07fc0bb48 ("RDMA/hns: Fix build error") and
a3e2d4c7e7 ("RDMA/hns: remove obsolete Kconfig comment") to get back to
the previous state, then fix the issues described there differently, by
adding more specific dependencies: INFINIBAND_HNS can now only be built-in
if at least one of HNS or HNS3 are built-in, and the individual back-ends
are only available if that code is reachable from the main driver.
Fixes: a07fc0bb48 ("RDMA/hns: Fix build error")
Fixes: a3e2d4c7e7 ("RDMA/hns: remove obsolete Kconfig comment")
Fixes: dd74282df5 ("RDMA/hns: Initialize the PCI device for hip08 RoCE")
Fixes: 08805fdbeb ("RDMA/hns: Split hw v1 driver from hns roce driver")
Link: https://lore.kernel.org/r/20191007211826.3361202-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the error return path when the call to function
dev->dfx->query_cqc_info fails will leak object 'context'. Fix this by
making the error return path via 'err' return return codes rather than
-EMSGSIZE, set ret appropriately for all error return paths and for the
memory leak now return via 'err' rather than just returning without
freeing context.
Link: https://lore.kernel.org/r/20191024131034.19989-1-colin.king@canonical.com
Addresses-Coverity: ("Resource leak")
Fixes: e1c9a0dc29 ("RDMA/hns: Dump detailed driver-specific CQ")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
qpc/cqc timer entry size needs one page, but currently they are fixedly
configured to 4096, which is not appropriate in 64K page scenarios. So
they should be modified to PAGE_SIZE.
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1571908917-16220-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
SRQ's page size configuration of BA and buffer should depend on current
PAGE_SHIFT, or it can't work in scenario of 64K page.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1571908917-16220-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HNS redefined available in bits.h define and didn't use it, we can safely
delete it.
Link: https://lore.kernel.org/r/20191023054239.31648-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "ucmd->log_sq_bb_count" variable is a user controlled variable in the
0-255 range. If we shift more than then number of bits in an int then
it's undefined behavior (it shift wraps), and potentially the int could
become negative.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20190608092514.GC28890@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Even if no response from hardware, we should make sure that qp related
resources are released to avoid memory leaks.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1570584110-3659-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
The restrack function return EINVAL instead of EMSGSIZE when the driver
operation fails.
Fixes: 4b42d05d0b ("RDMA/hns: Remove unnecessary kzalloc")
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
The parameters npages used to initial mtt of srq->idx_que shouldn't be
same with srq's. And page_shift should be calculated from idx_buf_pg_sz.
This patch fixes above issues and use field named npage and page_shift
in hns_roce_buf instead of two temporary variables to let us use them
anywhere.
Fixes: 18df508c79 ("RDMA/hns: Remove if-else judgment statements for creating srq")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
This cycle mainly saw lots of bug fixes and clean up code across the core
code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better with
the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP
-----BEGIN PGP SIGNATURE-----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=zHXW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"This cycle mainly saw lots of bug fixes and clean up code across the
core code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better
with the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA: Fix double-free in srq creation error flow
RDMA/efa: Fix incorrect error print
IB/mlx5: Free mpi in mp_slave mode
IB/mlx5: Use the original address for the page during free_pages
RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
RDMA/hns: Package operations of rq inline buffer into separate functions
RDMA/hns: Optimize cmd init and mode selection for hip08
IB/hfi1: Define variables as unsigned long to fix KASAN warning
IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
IB/hfi1: Add traces for TID RDMA READ
RDMA/siw: Relax from kmap_atomic() use in TX path
IB/iser: Support up to 16MB data transfer in a single command
RDMA/siw: Fix page address mapping in TX path
RDMA: Fix goto target to release the allocated memory
RDMA/usnic: Avoid overly large buffers on stack
RDMA/odp: Add missing cast for 32 bit
RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
Documentation/infiniband: update name of some functions
RDMA/cma: Fix false error message
RDMA/hns: Fix wrong assignment of qp_access_flags
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
Here packages the codes of allocating and freeing rq inline buffer in
hns_roce_create_qp_common function in order to reduce the complexity.
Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are two modes for mailbox command (cmd) queue, i.e., event mode and
poll mode. For each mode, we use corresponding semaphores to protect the
cmd queue resource competition, so called event_sem and poll_sem. During
cmd init, both semaphores are initialized and poll mode is selected.
Thus, there is no need to up poll_sema again in cmd_use_polling.
Furthermore, there is no need to down the sema of the other side while
switching mode. This patch aims to decouple the switch between event mode
and poll mode of cmd.
Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use devm_platform_ioremap_resource() to simplify the code a bit. This is
detected by coccinelle.
Link: https://lore.kernel.org/r/20190906141727.26552-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We used wrong shifts when set qp_attr->qp_access_flag,
this patch exchange V2_QP_RRE_S and V2_QP_RWE_S to fix it.
Fixes: 2a3d923f87 ("RDMA/hns: Replace magic numbers with #defines")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-10-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Delete the assignment of srq->ibsrq.ext.xrc.srq_num, beacause this
value is not used.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-9-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Because if the value of srqwqe_buf_pg_sz is zero, npages and
ib_umem_page_count are equivalent, page_shif and PAGE_SHIFT
are equivalent in hns_roce_create_srq. Here remove it.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-8-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the hardware is resetting, the driver should not perform
the mailbox operation.Function-clear needs to add relevant judgment.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sparse is whining about the u32 and __le32 mixed usage in the driver.
The roce_set_field() is used to __le32 data of hardware only.
If a variable is not delivered to the hardware, the __le32 type and
related operations are not required.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
kasan will report a BUG when run command 'insmod hns_roce_hw_v2.ko', the
calltrace is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_v2_init_eq_table+0x1324/0x1948
[hns_roce_hw_v2]
Read of size 8 at addr ffff8020e7a10608 by task insmod/256
CPU: 0 PID: 256 Comm: insmod Tainted: G O 5.2.0-rc4 #1
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_v2_init_eq_table+0x1324/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 256:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_v2_init_eq_table+0x764/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8020e7a10600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff8020e7a10600, ffff8020e7a10680)
The buggy address belongs to the page:
page:ffff7fe00839e840 refcount:1 mapcount:0 mapping:ffff802340020200 index:0x0
flags: 0x5fffe00000000200(slab)
raw: 5fffe00000000200 dead000000000100 dead000000000200 ffff802340020200
raw: 0000000000000000 0000000081000100 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8020e7a10500: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff8020e7a10580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8020e7a10600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8020e7a10680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8020e7a10700: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'rmmod hns_roce_hw_v2', the calltrace
is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_table_mhop_put+0x584/0x828
[hns_roce]
Read of size 8 at addr ffff802185e08300 by task rmmod/270
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_table_mhop_put+0x584/0x828 [hns_roce]
hns_roce_table_put+0x174/0x1a0 [hns_roce]
hns_roce_mr_free+0x124/0x210 [hns_roce]
hns_roce_dereg_mr+0x90/0xb8 [hns_roce]
ib_dealloc_pd_user+0x60/0xf0
ib_mad_port_close+0x128/0x1d8
ib_mad_remove_device+0x94/0x118
remove_client_context+0xa0/0xe0
disable_device+0xfc/0x1c0
__ib_unregister_device+0x60/0xe0
ib_unregister_device+0x24/0x38
hns_roce_exit+0x3c/0x138 [hns_roce]
__hns_roce_hw_v2_uninit_instance.isra.30+0x28/0x50 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance+0x44/0x60 [hns_roce_hw_v2]
hclge_uninit_client_instance+0x15c/0x238 [hclge]
hnae3_uninit_client_instance+0x84/0xa8 [hnae3]
hnae3_unregister_client+0x84/0x158 [hnae3]
hns_roce_hw_v2_exit+0x14/0x20 [hns_roce_hw_v2]
__arm64_sys_delete_module+0x20c/0x308
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 255:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_init_hem_table+0x20c/0x428 [hns_roce]
hns_roce_init+0x214/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
0xffff200009c00014
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff802185e06300
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes to the right of
8192-byte region [ffff802185e06300, ffff802185e08300)
The buggy address belongs to the page:
page:ffff7fe008617800 refcount:1 mapcount:0 mapping:ffff802340020e00 index:0x0
compound_mapcount: 0
flags: 0x5fffe00000010200(slab|head)
raw: 5fffe00000010200 dead000000000100 dead000000000200 ffff802340020e00
raw: 0000000000000000 00000000803e003e 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff802185e08200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff802185e08280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff802185e08300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff802185e08380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff802185e08400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When exiting "for loop", the actual value of pi will be
increased by 1, which is compatible with the next calculation.
But when pi is equal to "ci + hr_cq-> ib_cq.cqe", the "break"
was called and the pi is actual value, it will lead one cqe
still existing, so the "==" should be modify to ">".
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When create a qp and attached to srq, rq will no longer be used
and the members of rq will be set zero. As a result, the wrid
of rq will not be allocated and used.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-3-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should set IB_WC_WITH_VLAN only when VLAN is enabled.
In addition, move setting of IB_WC_WITH_SMAC below
setting of wc->smac.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565343666-73193-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
If we enabled alw_lcl_lpbk in promiscuous mode, packet whose source
and destination mac address is equal will be handled in both inner
loopback and outer loopback. This will halve performance of roce in
promiscuous mode.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565276034-97329-14-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current prompt message is uncorrect when destroying qp, add qpn
information when creating qp.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-4-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
It needs to check the sq size with integrity when configures
the relatived parameters of sq. Here moves the relatived code
into a special function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
UAR in CQ is not used and generates the following compilation
warning, clean the code by removing uar assignment.
drivers/infiniband/hw/hns/hns_roce_cq.c: In function _create_user_cq_:
drivers/infiniband/hw/hns/hns_roce_cq.c:305:27: warning: parameter _uar_ set but not used [-Wunused-but-set-parameter]
305 | struct hns_roce_uar *uar,
| ~~~~~~~~~~~~~~~~~~~~~^~~
Fixes: 4f8f0d5e33 ("RDMA/hns: Package the flow of creating cq")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801114827.24263-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix to return error code -ENOMEM from the rdma_zalloc_drv_obj() error
handling case instead of 0, as done elsewhere in this function.
Fixes: e8ac9389f0 ("RDMA: Fix allocation failure on pointer pd")
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801012725.150493-1-weiyongjun1@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function hns_roce_v2_cleanup_eq_table:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5920:6:
warning: variable irq_num set but not used [-Wunused-but-set-variable]
It is not used since
commit 33db6f9484 ("RDMA/hns: Refactor eq table init for hip08")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731073748.17664-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-21-swboyd@chromium.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a helper to match the firmware node handle of a device and provide
wrappers for {bus/class/driver}_find_device() APIs to avoid proliferation
of duplicate custom match functions.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-usb@vger.kernel.org
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20190723221838.12024-4-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fix for IB port statistics initialization ("IB/core: Fix querying
total rdma stats") is needed before we take a follow-on patch to
for-next.
Signed-off-by: Doug Ledford <dledford@redhat.com>
If INFINIBAND_HNS_HIP08 is selected and HNS3 is m,
but INFINIBAND_HNS is y, building fails:
drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_exit':
hns_roce_hw_v2.c:(.exit.text+0xd): undefined reference to `hnae3_unregister_client'
drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_init':
hns_roce_hw_v2.c:(.init.text+0xd): undefined reference to `hnae3_register_client'
Also if INFINIBAND_HNS_HIP06 is selected and HNS_DSAF
is m, but INFINIBAND_HNS is y, building fails:
drivers/infiniband/hw/hns/hns_roce_hw_v1.o: In function `hns_roce_v1_reset':
hns_roce_hw_v1.c:(.text+0x39fa): undefined reference to `hns_dsaf_roce_reset'
hns_roce_hw_v1.c:(.text+0x3a25): undefined reference to `hns_dsaf_roce_reset'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: dd74282df5 ("RDMA/hns: Initialize the PCI device for hip08 RoCE")
Fixes: 08805fdbeb ("RDMA/hns: Split hw v1 driver from hns roce driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190724065443.53068-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
To make the code more readable, move the part of naming irq and request
irq out of eq table init into a separate function.
Link: https://lore.kernel.org/r/1562593285-8037-10-git-send-email-oulijun@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The calculation of mhop for hem is duplicated in hns_roce_init_hem_table
and hns_roce_calc_hem_mhop, extracting it from them to a separate
function. Moreover, this patch refactors hns_roce_check_whether_mhop to
reduce complexity.
Link: https://lore.kernel.org/r/1562593285-8037-9-git-send-email-oulijun@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move some code of the hns_roce_rereg_user_mr() function into an
independent function in oder to improve readability.
Link: https://lore.kernel.org/r/1562593285-8037-8-git-send-email-oulijun@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move some lines for allocating multi-hop addressing into independent
functions in order to improve readability.
Link: https://lore.kernel.org/r/1562593285-8037-7-git-send-email-oulijun@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, more than 20 lines of duplicate code exist in function
'modify_qp_init_to_init' and function 'modify_qp_reset_to_init', which
affects the readability of the code. Consolidate them.
Link: https://lore.kernel.org/r/1562593285-8037-6-git-send-email-oulijun@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move some lines which exist hns_roce_v2_modify_qp function into a new
function. The code refactored mainly includes some absolute fields of qp
context and some optional fields of qp context.
Link: https://lore.kernel.org/r/1562593285-8037-4-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the related codes of creating user srq and kernel srq into two
independent functions as well as remove some unused code and
simplifications.
Link: https://lore.kernel.org/r/1562593285-8037-3-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the comparison of end with less than zero is always false
because end is an unsigned long. Also, replace checks of end with
non-zero with end > 0 as it is possible that the #defined decrement may be
changed in the future causing end to step over zero and go negative.
The initialization of end with 0 is also redundant as this value is never
read and is later set to HW_SYNC_TIMEOUT_MSECS, so fix this by
initializing it with this value to begin with.
Link: https://lore.kernel.org/r/20190531092101.28772-1-colin.king@canonical.com
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 669cefb654 ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When run perftest in many times, the system will report a BUG as follows:
BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1
BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1
We tested with different kernel version and found it started from the the
following commit:
commit d10bcf947a ("RDMA/umem: Combine contiguous PAGE_SIZE regions in
SGEs")
In this commit, the sg->offset is always 0 when sg_set_page() is called in
ib_umem_get() and the drivers are not allowed to change the sgl, otherwise
it will get bad page descriptor when unfolding SGEs in __ib_umem_release()
as sg_page_count() will get wrong result while sgl->offset is not 0.
However, there is a weird sgl usage in the current hns driver, the driver
modified sg->offset after calling ib_umem_get(), which caused we iterate
past the wrong number of pages in for_each_sg_page iterator.
This patch fixes it by correcting the non-standard sgl usage found in the
hns_roce_db_map_user() function.
Fixes: d10bcf947a ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out of the
drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev
-----BEGIN PGP SIGNATURE-----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=iWcG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
Here Clean up unnecessary initial value for some variable.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When smmu is enable, if execute the perftest command and then use 'kill
-9' to exit, follow this operation repeatedly, the kernel will have a high
probability to print the following smmu event:
arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010
arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000020900000080
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000f47cf000
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000f47cf000
This is because the hw will periodically refresh the qpc cache until the
next reset.
This patch fixed it by removing the action that release qpc memory in the
'hns_roce_qp_free' function.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The format specifier \"%p\" can leak kernel addresses. Use \"%pK\"
instead.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The buffer size of qp which used to allocate qp buffer space for storing
sqwqe and rqwqe will be the length of buffer space. The kernel driver will
use the buffer address and the same size to get the user memory. The same
size named buff_size of qp. According the algorithm of calculating, The
size of the two is not equal when users set the max sge of sq.
Fixes: b28ca7ccef ("RDMA/hns: Limit extend sq sge num")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hw resetting, there is no response from hw when driver sending cmdq.
If driver still send cmdq to hw, the reset process may be blocked. So
reset flag should be set to intercept the cmdq command when driver
receiving "notify down" signal.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the depth of cq only supports 64K. According to the UM, the
depth of cq is up to 4M, Therefore the ba page size of cqe was modified to
support the maximum specification of cq depth.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Hip06 reserve 12 qps, Hip08 reserve 8 qps. When the QP is released, the
chip model is not judged, and the Hip08 cannot release the qpn 8~12
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It uses hns_roce_mtr_init in hns_roce_create_qp_common function. As a
result, it should use hns_roce_mtr_cleanup function for cleaning mtr when
destroying qp.
Fixes: 8d18ad83f1 ("RDMA/hns: Fix bug when wqe num is larger than 16K")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The patch below wasn't fully tested for all combinations of module and
configs, and causes a compile failure:
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_ah.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_alloc.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cmd.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cq.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_db.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_hem.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_mr.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_pd.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_qp.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_restrack.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_srq.o
see include/linux/module.h for more information
ERROR: "hns_roce_bitmap_cleanup" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_bitmap_init" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_free_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_alloc_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_table_get" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_bitmap_alloc" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_table_find" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
The fix is to put the module sub components in the right line.
Fixes: e9816ddf2a ("RDMA/hns: Cleanup unnecessary exported symbols")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning:
variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In commit af7ddd8a62 ("Merge tag 'dma-mapping-4.21' of
git://git.infradead.org/users/hch/dma-mapping"),
dma_alloc_coherent/dmam_alloc_coherent always zeroed the returned memory.
So the memset after a coherent allocation function is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in an dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch removes the hns-roce.ko for cleanup all the exported symbols in
common part.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is supposed to return negative kernel error codes but here
it returns CMD_RST_PRC_EBUSY (2). The error code eventually gets passed
to IS_ERR() and since it's not an error pointer it leads to an Oops in
hns_roce_v1_rsv_lp_qp()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a potential integer overflow when int i is left shifted as this
is evaluated using 32 bit arithmetic but is being used in a context that
expects an expression of type dma_addr_t. Fix this by casting integer i
to dma_addr_t before shifting to avoid the overflow.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 2ac0bc5e72 ("RDMA/hns: Add a group interfaces for optimizing buffers getting flow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "end" variable is declared as unsigned and can't be negative, it
leads to the situation where timeout limit is not honored, so let's
convert logic to ensure that loop is bounded.
drivers/infiniband/hw/hns/hns_roce_hw_v1.c: In function _hns_roce_v1_clear_hem_:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:2471:12: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
2471 | if (end < 0) {
| ^
Fixes: 669cefb654 ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update ib_umem_release() to behave similarly to kfree() and allow
submitting NULL pointer as safe input to this function.
Fixes: a52c8e2469 ("RDMA: Clean destroy CQ in drivers do not return errors")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During removing the driver, we needs to notify the roce engine to
stop working immediately,and symmetrically recycle the hardware
resources requested during initialization.
The hardware provides a command called function clear that can package
these operations,so that the driver can only focus on releasing
resources that applied from the operating system.
This patch implements the call of this command.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hip08 can support up to 32768 wqes in one qp. currently if the wqe num
is larger than 16384, the driver will lead a calltrace as follows.
[21361.393725] Call trace:
[21361.398605] hns_roce_v2_modify_qp+0xbcc/0x1360 [hns_roce_hw_v2]
[21361.410627] hns_roce_modify_qp+0x1d8/0x2f8 [hns_roce]
[21361.420906] _ib_modify_qp+0x70/0x118
[21361.428222] ib_modify_qp+0x14/0x1c
[21361.435193] rt_ktest_modify_qp+0xb8/0x650 [rdma_test]
[21361.445472] exec_modify_qp_cmd+0x110/0x4d8 [rdma_test]
[21361.455924] rt_ktest_dispatch_cmd_3+0xa94/0x2edc [rdma_test]
[21361.467422] rt_ktest_dispatch_cmd_2+0x9c/0x108 [rdma_test]
[21361.478570] rt_ktest_dispatch_cmd+0x138/0x904 [rdma_test]
[21361.489545] rt_ktest_dev_write+0x328/0x4b0 [rdma_test]
[21361.499998] __vfs_write+0x38/0x15c
[21361.506966] vfs_write+0xa8/0x1a0
[21361.513586] ksys_write+0x50/0xb0
[21361.520206] sys_write+0xc/0x14
[21361.526479] el0_svc_naked+0x30/0x34
[21361.533622] Code: 1ac10841 d37d7c22 0b000021 d37df021 (f86268c0)
[21361.545815] ---[ end trace e2a1feb2c3d7f13c ]---
When the wqe num is larger than 16384, hns_roce_table_find will return an
invalid mtt, this will lead an kernel paging requet error if the driver try
to access it. It's the mtt design defect which can't support up to the max
wqe num of hip08.
This patch fixs it by replacing mtt with mtr for wqe.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, the code for getting umem and kmem buffers exist many files,
this patch adds a group interfaces to simplify the buffers getting flow.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, the MTT(memory translate table) design required a buffer
space must has the same hopnum, but the hip08 hw can support mixed
hopnum config in a buffer space.
This patch adds the MTR(memory translate region) design for supporting
mixed multihop.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the struct ib_client for all modules exporting cdevs related to the
ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now
autoloadable and discoverable by userspace over netlink instead of relying
on sysfs.
uverbs also exposes the DRIVER_ID for drivers that are able to support
driver id binding in rdma-core.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ensure that CQ is allocated and freed by IB/core and not by drivers.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Like all other destroy commands, .destroy_cq() call is not supposed
to fail. In all flows, the attempt to return earlier caused to memory
leaks.
This patch converts .destroy_cq() to do not return any errors.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This more closely follows how other subsytems work, with owner being a
member of the structure containing the function pointers.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When user post recv a srq with multiple sges, the hardware will get the
last correct sge and count the sge numbers according to the specific
identifier with lkey. For example, when the driver fills the sges with
every wr less than the max sge that the user configured when creating srq,
the hardware will stop getting the sge according to the specific lkey in
the sge. However, it will always end with the first sge in the current
post srq recv interface implementation.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A previous change incorrectly changed the inverted logic and logically
negated the readl rather than the shifted readl result. Fix this by
adding in missing parentheses around the expression that needs to be
logically negated.
Addresses-Coverity: ("Logically dead code")
Fixes: 669cefb654 ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The usual driver bug fixes and fixes for a couple of regressions introduced in
5.2:
- Fix a race on bootup with RDMA device renaming and srp. SRP also needs to
rename its internal sys files
- Fix a memory leak in hns
- Don't leak resources in efa on certain error unwinds
- Don't panic in certain error unwinds in ib_register_device
- Various small user visible bug fix patches for the hfi and efa drivers
- Fix the 32 bit compilation break
-----BEGIN PGP SIGNATURE-----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=RmxY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Things are looking pretty quiet here in RDMA, not too many bug fixes
rolling in right now. The usual driver bug fixes and fixes for a
couple of regressions introduced in 5.2:
- Fix a race on bootup with RDMA device renaming and srp. SRP also
needs to rename its internal sys files
- Fix a memory leak in hns
- Don't leak resources in efa on certain error unwinds
- Don't panic in certain error unwinds in ib_register_device
- Various small user visible bug fix patches for the hfi and efa
drivers
- Fix the 32 bit compilation break"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Remove MAYEXEC flag check from mmap flow
mlx5: avoid 64-bit division
IB/hfi1: Validate page aligned for a given virtual address
IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
IB/rdmavt: Fix alloc_qpn() WARN_ON()
RDMA/core: Fix panic when port_data isn't initialized
RDMA/uverbs: Pass udata on uverbs error unwind
RDMA/core: Clear out the udata before error unwind
RDMA/hns: Fix PD memory leak for internal allocation
RDMA/srp: Rename SRP sysfs name after IB device rename trigger
When the user submits more than 32 work request to a srq queue
at a time, it needs to find the corresponding number of entries
in the bitmap in the idx queue. However, the original lookup
function named ffs only processes 32 bits of the array element,
When the number of srq wqe issued exceeds 32, the ffs will only
process the lower 32 bits of the elements, it will not be able
to get the correct wqe index for srq wqe.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch makes the code more readable by removing magic numbers.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some functions, the jiffies operation is unnecessary, and we can
control delay using mdelay and udelay functions only. Especially, in
hns_roce_v1_clear_hem, the function calls spin_lock_irqsave, the context
disables interrupt, so we can not use jiffies and msleep functions.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hip08 set gid, it will call spin_unlock_bh when send cmq. if main.ko
call spin_lock_irqsave firstly, and the kernel is before commit
f71b74bca6 ("irq/softirqs: Use lockdep to assert IRQs are
disabled/enabled"), it will cause WARN_ON_ONCE because of calling
spin_unlock_bh in disable context.
In fact, the spin_lock_irqsave in main.ko is only used for hip06, and
should be placed in hns_roce_hw_v1.c. hns_roce_hw_v2.c uses its own
spin_unlock_bh and does not need main.ko manage spin_lock.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to hip08 UM, the maximum number of CQEs supported by each CQ is
4M.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to print when communication is established, especially
while lots of qp used by application.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
free_pd is allocated internally by the driver hence needs to be freed
internally too or it leaks.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This value has always been set to PAGE_SHIFT in the core code, the only
thing that does differently was the ODP path. Move the value into the ODP
struct and still use it for ODP, but change all the non-ODP things to just
use PAGE_SHIFT/PAGE_SIZE/PAGE_MASK directly.
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has been a smaller cycle than normal. One new driver was accepted,
which is unusual, and at least one more driver remains in review on the
list.
- Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma
- Many patches from MatthewW converting radix tree and IDR users to use
xarray
- Introduction of tracepoints to the MAD layer
- Build large SGLs at the start for DMA mapping and get the driver to
split them
- Generally clean SGL handling code throughout the subsystem
- Support for restricting RDMA devices to net namespaces for containers
- Progress to remove object allocation boilerplate code from drivers
- Change in how the mlx5 driver shows representor ports linked to VFs
- mlx5 uapi feature to access the on chip SW ICM memory
- Add a new driver for 'EFA'. This is HW that supports user space packet
processing through QPs in Amazon's cloud
-----BEGIN PGP SIGNATURE-----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=TS64
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a smaller cycle than normal. One new driver was
accepted, which is unusual, and at least one more driver remains in
review on the list.
Summary:
- Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4,
vmw_pvrdma
- Many patches from MatthewW converting radix tree and IDR users to
use xarray
- Introduction of tracepoints to the MAD layer
- Build large SGLs at the start for DMA mapping and get the driver to
split them
- Generally clean SGL handling code throughout the subsystem
- Support for restricting RDMA devices to net namespaces for
containers
- Progress to remove object allocation boilerplate code from drivers
- Change in how the mlx5 driver shows representor ports linked to VFs
- mlx5 uapi feature to access the on chip SW ICM memory
- Add a new driver for 'EFA'. This is HW that supports user space
packet processing through QPs in Amazon's cloud"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits)
RDMA/ipoib: Allow user space differentiate between valid dev_port
IB/core, ipoib: Do not overreact to SM LID change event
RDMA/device: Don't fire uevent before device is fully initialized
lib/scatterlist: Remove leftover from sg_page_iter comment
RDMA/efa: Add driver to Kconfig/Makefile
RDMA/efa: Add the efa module
RDMA/efa: Add EFA verbs implementation
RDMA/efa: Add common command handlers
RDMA/efa: Implement functions that submit and complete admin commands
RDMA/efa: Add the ABI definitions
RDMA/efa: Add the com service API definitions
RDMA/efa: Add the efa_com.h file
RDMA/efa: Add the efa.h header file
RDMA/efa: Add EFA device definitions
RDMA: Add EFA related definitions
RDMA/umem: Remove hugetlb flag
RDMA/bnxt_re: Use core helpers to get aligned DMA address
RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
RDMA/umem: Add API to find best driver supported page size in an MR
...
Remove mmiowb() from the kernel memory barrier API and instead, for
architectures that need it, hide the barrier inside spin_unlock() when
MMIO has been performed inside the critical section.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFaUACgkQt6xw3ITB
YzRICQgAiv7wF/yIbBhDOmCNCAKDO59chvFQWxXWdGk/aAB56kwKAMXJgLOvlMG/
VRuuLyParTFQETC3jaxKgnO/1hb+PZLDt2Q2KqixtjIzBypKUPWvK2sf6THhSRF1
GK0DBVUd1rCrWrR815+SPb8el4xXtdBzvAVB+Fx35PXVNpdRdqCkK+EQ6UnXGokm
rXXHbnfsnquBDtmb4CR4r2beH+aNElXbdt0Kj8VcE5J7f7jTdW3z6Q9WFRvdKmK7
yrsxXXB2w/EsWXOwFp0SLTV5+fgeGgTvv8uLjDw+SG6t0E0PebxjNAflT7dPrbYL
WecjKC9WqBxrGY+4ew6YJP70ijLBCw==
=aC8m
-----END PGP SIGNATURE-----
Merge tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull mmiowb removal from Will Deacon:
"Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())
Remove mmiowb() from the kernel memory barrier API and instead, for
architectures that need it, hide the barrier inside spin_unlock() when
MMIO has been performed inside the critical section.
The only relatively recent changes have been addressing review
comments on the documentation, which is in a much better shape thanks
to the efforts of Ben and Ingo.
I was initially planning to split this into two pull requests so that
you could run the coccinelle script yourself, however it's been plain
sailing in linux-next so I've just included the whole lot here to keep
things simple"
* tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits)
docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section
arch: Remove dummy mmiowb() definitions from arch code
net/ethernet/silan/sc92031: Remove stale comment about mmiowb()
i40iw: Redefine i40iw_mmiowb() to do nothing
scsi/qla1280: Remove stale comment about mmiowb()
drivers: Remove explicit invocations of mmiowb()
drivers: Remove useless trailing comments from mmiowb() invocations
Documentation: Kill all references to mmiowb()
riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code
powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code
ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
m68k/io: Remove useless definition of mmiowb()
nds32/io: Remove useless definition of mmiowb()
x86/io: Remove useless definition of mmiowb()
arm64/io: Remove useless definition of mmiowb()
ARM/io: Remove useless definition of mmiowb()
mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors
...
Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.
This moves logic from mlx5 driver to core for wider usage for RoCE ports.
This is a preparation patch to allow detaching netdev in subsequent patch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the maximum send wr delivered by the user is zero, the qp does not
have a sq.
When allocating the sq db buffer to store the user sq pi pointer and map
it to the kernel mode, max_send_wr is used as the trigger condition, while
the kernel does not consider the max_send_wr trigger condition when
mapmping db. It will cause sq record doorbell map fail and create qp fail.
The failed print information as follows:
hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000
hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff
hns3 0000:7d:00.1: sq record doorbell map failed!
hns3 0000:7d:00.1: Create RC QP failed
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe says:
====================
Upon review it turns out there are some long standing problems in BAR
mapping area:
* BAR pages intended for read-only can be switched to writable via mprotect.
* Missing use of rdma_user_mmap_io for the mlx5 clock BAR page.
* Disassociate causes SIGBUS when touching the pages.
* CPU pages are being mapped through to the process via remap_pfn_range
instead of the more appropriate vm_insert_page, causing weird behaviors
during disassociation.
This series adds the missing VM_* flag manipulation, adds faulting a zero
page for disassociation and revises the CPU page mappings to use
vm_insert_page.
====================
For dependencies this branch is based on for-rc from
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
* branch 'rdma_mmap':
RDMA: Remove rdma_user_mmap_page
RDMA/mlx5: Use get_zeroed_page() for clock_info
RDMA/ucontext: Fix regression with disassociate
RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
RDMA/mlx5: Do not allow the user to write to the clock page
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Verbs destroy callbacks are synchronous operations and can't be delayed.
The expectation is that after driver returned from destroy function, the
memory can be freed and user won't be able to access it again.
Ditch workqueue implementation used in HNS driver.
Fixes: d838c481e0 ("IB/hns: Fix the bug when destroy qp")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: oulijun <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drivers that never change their ndev dynamically do not need to use
the get_netdev callback.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
The method of hem free for SCC context is different from qp context.
In the current version, if free SCC hem during the execution of qp free,
there may be smmu error as below:
arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010
arm-smmu-v3 arm-smmu-v3.1.auto: 0x000012000000017c
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000000009e0
arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000
As SCC context is still used by hardware after qp free, we can solve this
problem by removing SCC hem free from hns_roce_qp_free.
Fixes: 6a157f7d1b ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.
Unable to handle kernel paging request at virtual address ffff00006e3cd000
...
Call trace:
hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
hns_roce_create_srq+0x74c/0x808 [hns_roce]
ib_create_srq+0x28/0xc8
Fixes: 0203b14c4f ("RDMA/hns: Unify the calculation for hem index in hip08")
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In mhop 0 mode, 64*bt_num queues can be supported.
In mhop 1 mode, 32K*bt_num queues can be supported.
Config srqc_hop_num to 1 to support 1M SRQ queues.
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds support of resource track for hip08 and take dumping cq
context state used for debugging as an example. More resources track
supports for hns driver will be added in future.
The output should be as follows.
$ rdma res show cq dev hnseth0 -d
dev hnseth0 cqe 1023 users 2 poll-ctx WORKQUEUE pid 0 comm [ib_core] drv_state 2 drv_ceq
n 0 drv_cqn 0 drv_hopnum 1 drv_pi 0 drv_ci 0 drv_coalesce 0 drv_period 0 drv_cnt 0
Signed-off-by: Tao Tian <tiantao6@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert SRQ allocation from drivers to be in the IB/core
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().
We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mmiowb() is now implied by spin_unlock() on architectures that require
it, so there is no reason to call it from driver code. This patch was
generated using coccinelle:
@mmiowb@
@@
- mmiowb();
and invoked as:
$ for d in drivers include/linux/qed sound; do \
spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done
NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation. If you've ended up bisecting to this commit, you can
reintroduce the mmiowb() calls using wmb() instead, which should restore
the old behaviour on all architectures other than some esoteric ia64
systems.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
port_pd is treated as le32 in declaration and read, fix assignment to be
in le32 too. This change fixes the following compilation warnings.
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type
in assignment (different base types)
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd
drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype]
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Lijun Ou <ouliun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now when ib_udata is passed to all the driver's object create/destroy APIs
the ib_udata will carry the ib_ucontext for every user command. There is
no need to also pass the ib_ucontext via the functions prototypes.
Make ib_udata the only argument psssed.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have the udata passed to all the ib_xxx object destroy APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Also fully initialise the qp before storing it in the XArray.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the locking to not disable interrupts as the lookup in interrupt
context will not see a freed CQ, thanks to the synchronize_irq() call
before freeing the CQ.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The forgotten static keyword causes to the following error to appear while
building HNS driver. Declare hns_roce_cmq_send() to be static function to
fix this warning.
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1089:5: warning: no previous
prototype for _hns_roce_cmq_send_ [-Wmissing-prototypes]
int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
Fixes: 6a04aed6af ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The src_mac array is not used in hns_roce_v2_modify_qp function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to IB protocol, the send with invalidate operation will not
invalidate mr that was created through a register mr or reregister mr.
Fixes: e93df01085 ("RDMA/hns: Support local invalidate for hip08 in kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The driver should not print the error information when the hip08 driver
not support virtual function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to IB protocol, some fields of qp context are filled with
optional when the relatived attr_mask are set. The relatived attr_mask
include IB_QP_TIMEOUT, IB_QP_RETRY_CNT, IB_QP_RNR_RETRY and
IB_QP_MIN_RNR_TIMER. Besides, we move some assignments of the fields of
qp context into the outside of the specific qp state jump function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to hip08 UM(User Manual), the raq_psn field size is [23:0].
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Only when the IB_QP_RQ_PSN flags of attr_mask is set is it valid to assign
the relatived fields of rq'psn into the qp context when modified qp.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Only when the IB_QP_SQ_PSN flags of attr_mask is set is it valid to assign
the relatived fields of psn into the qp context when modified qp.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The the below commit, hns_roce_v2_modify_qp is called inside spinlock
while using GFP_KERNEL. Change it to GFP_ATOMIC.
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following the PD conversion patch, do the same for ucontext allocations.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Accroding to hip08's limitation, qp&cq specification is 1M, mtpt
specification 1M in kernel space.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now when we have the udata passed to all the ib_xxx object creation APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds new device capability for IB_DEVICE_MEM_MGT_EXTENSIONS to
indicate device support for the following features:
1. Fast register memory region.
2. send with remote invalidate by frmr
3. local invalidate memory regsion
As well as adds the max depth of frmr page list len.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current all messages printed for aeq subtype event are wrong. Thus,
delete them and only the value of subtype event is printed.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The memory allocated for wrid should be initialized to zero.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The state of mr after reregister operation should be set to valid
state. Otherwise, it will keep the same as the state before reregistered.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch modifies the minimum CQ depth specification of hip08 and is
consistent with the processing of hip06.
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The null check on an allocation failure on pd is currently checking
if pd is non-null rather than null. Fix this by adding the missing !
operator.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.
Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The PD allocations in IB/core allows us to simplify drivers and their
error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand
in had with relevant update in .dealloc_pd().
We will use this opportunity and convert .dealloc_pd() to don't fail, as
it was suggested a long time ago, failures are not happening as we have
never seen a WARN_ON print.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging when sending doorbell
during reset. We can fix it by prohibiting doorbell during reset.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset. We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the reset process, the hns3 NIC driver notifies the RoCE driver to
perform reset related processing by calling the .reset_notify() interface
registered by the RoCE driver in hip08 SoC.
In the current version, if a reset occurs simultaneously during the
execution of rmmod or insmod ko, there may be Oops error as below:
Internal error: Oops: 86000007 [#1] PREEMPT SMP
Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2]
CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G O 4.19.0-ge00d540 #1
Hardware name: Huawei Technologies Co., Ltd.
Workqueue: events hclge_reset_service_task [hclge]
pstate: 60c00009 (nZCv daif +PAN +UAO)
pc : 0xffff00000100b0b8
lr : 0xffff00000100aea0
sp : ffff000009afbab0
x29: ffff000009afbab0 x28: 0000000000000800
x27: 0000000000007ff0 x26: ffff80002f90c004
x25: 00000000000007ff x24: ffff000008f97000
x23: ffff80003efee0a8 x22: 0000000000001000
x21: ffff80002f917ff0 x20: ffff8000286ea070
x19: 0000000000000800 x18: 0000000000000400
x17: 00000000c4d3225d x16: 00000000000021b8
x15: 0000000000000400 x14: 0000000000000400
x13: 0000000000000000 x12: ffff80003fac6e30
x11: 0000800036303000 x10: 0000000000000001
x9 : 0000000000000000 x8 : ffff80003016d000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000000
x3 : 0000000000000004 x2 : 00000000000007ff
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9)
Call trace:
0xffff00000100b0b8
0xffff00000100b3a0
hns_roce_init+0x624/0xc88 [hns_roce]
0xffff000001002df8
0xffff000001006960
hclge_notify_roce_client+0x74/0xe0 [hclge]
hclge_reset_service_task+0xa58/0xbc0 [hclge]
process_one_work+0x1e4/0x458
worker_thread+0x40/0x450
kthread+0x12c/0x130
ret_from_fork+0x10/0x18
Code: bad PC value
In the reset process, we will release the resources firstly, and after the
hardware reset is completed, we will reapply resources and reconfigure the
hardware.
We can solve this problem by modifying both the NIC and the RoCE
driver. We can modify the concurrent processing in the NIC driver to avoid
calling the .reset_notify and .uninit_instance ops at the same time. And
we need to modify the RoCE driver to record the reset stage and the
driver's init/uninit state, and check the state in the .reset_notify,
.init_instance. and uninit_instance functions to avoid NULL pointer
operation.
Fixes: cb7a94c9c8 ("RDMA/hns: Add reset process for RoCE in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes the following sparse warnings:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5822:5: warning:
symbol 'hns_roce_v2_query_srq' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:158:6: warning:
symbol 'hns_roce_srq_free' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:81:5: warning:
symbol 'hns_roce_srq_alloc' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
5Xv88is=
=dVd1
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc5' into rdma.git for-next
Linux 5.0-rc5
Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_qp_flow_control_init':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4384:33: warning:
variable 'rst' set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.
Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas says:
Enable DEVX asynchronous query commands
This series enables querying a DEVX object in an asynchronous mode.
The userspace application won't block when calling the firmware and it will be
able to get the response back once that it will be ready.
To enable the above functionality:
- DEVX asynchronous command completion FD object was introduced.
- The applicable file operations were implemented to enable using it by
the user application.
- Query asynchronous method was added to the DEVX object, it will call the
firmware asynchronously and manages the response on the given input FD.
- Hot unplug support was added for the FD to work properly upon
unbind/disassociate.
- mlx5 core fence for asynchronous commands was implemented and used to
prevent racing upon unbind/disassociate.
This branch is based on mlx5-next & v5.0-rc2 due to dependencies, from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
* branch 'devx-async':
IB/mlx5: Implement DEVX hot unplug for async command FD
IB/mlx5: Implement the file ops of DEVX async command FD
IB/mlx5: Introduce async DEVX obj query API
IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hns_roce_ib_create_srq_resp is used to interact with the user for
data, this was open coded to use a u32 directly, instead use a properly
sized structure.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds qpc timer and cqc timer allocation support for hardware
timeout retransmission in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context clear support for DCQCN in kernel space
driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context allocation and initialization support for
DCQCN in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
AEQ overflow will be reported by hardware when too many asynchronous
events occurred but not be handled in time. Normally, AEQ overflow error
is not easy to occur. Once happened, we have to do physical function reset
to recover. PF reset is implemented in two steps. Firstly, set reset
level with ae_dev->ops->set_default_reset_request. Secondly, run reset
with ae_dev->ops->reset_event.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When flush cqe, it needs to get the pointer of rq and sq from db address
space of user and update it into qp context by modified qp. if rq does not
exist, it will not get the value from db address space of user.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.
Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CTX objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
