On some boards interrupt type might be different than falling edge,
like hardcoded in driver. Leave interrupt flags as they were pre-configured
from the device-tree. If they're not provided, default to falling edge
interrupts.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220523175344.5845-3-markuss.broks@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
(!val) has been checked outside the loop, remove redundant (val &&)
from loop.
Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Acked-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/20220523122755.90638-1-lizhengyu3@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
-----BEGIN PGP SIGNATURE-----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=wZYX
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
iio: ti-ads8688: use of_device_id for OF matching
iio: stmpe-adc: use of_device_id for OF matching
dt-bindings: iio: Fix incorrect compatible strings in examples
iio: gyro: mpu3050: Make mpu3050_common_remove() return void
iio: dac: ltc2632: Make use of device properties
iio: temperature: max31865: Make use of device properties
iio: proximity: mb1232: Switch to use fwnode_irq_get()
iio: imu: adis16480: Improve getting the optional clocks
iio: imu: adis16480: Use temporary variable for struct device
iio: imu: adis16480: Make use of device properties
staging: iio: ad2s1210: remove redundant assignment to variable negative
iio: adc: sc27xx: add support for PMIC sc2730
iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
iio: adc: sc27xx: refactor some functions for support more PMiCs
iio: adc: sc27xx: structure adjustment and optimization
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
iio: proximity: stk3310: Export near level property for proximity sensor
dt-bindings: iio: light: stk33xx: Add proximity-near-level
...
We have OF-centric variant of fwnode_irq_get() in the driver.
Replace it with a call to an agnostic implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/20220413183123.20292-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes: 3cef2e31b5 ("iio: proximity: vl53l0x: Add IRQ support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220412064210.10734-1-linmq006@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the default value for the register that set the resistance:
it has to be 0x10 per datasheet.
Fixes: 4c18a890df ("iio:proximity:sx9324: Add SX9324 support")
Cc: stable@vger.kernel.org
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220406165011.10202-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are four possible gain values according to 'sx9324_gain_vals[]':
1, 2, 4, and 8
The values are off by one when writing and reading the register. The
bits should be set according to this equation:
ilog2(<gain>) + 1
so that a gain of 8 is 0x4 in the register field and a gain of 4 is 0x3
in the register field, etc. Note that a gain of 0 is reserved per the
datasheet. The default gain (SX9324_REG_PROX_CTRL0_GAIN_1) is also
wrong. It should be 0x1 << 3, i.e. 0x8, not 0x80 which is setting the
reserved bit 7.
Fix this all up to properly handle the hardware gain and return errors
for invalid settings.
Fixes: 4c18a890df ("iio:proximity:sx9324: Add SX9324 support")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220324222928.874522-1-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After commit 7a3605bef8 ("iio: sx9310: Support ACPI property") we
started using the 'indio_dev->dev' to extract device properties for
various register settings in sx9310_get_default_reg(). This broke DT
based systems because dev_fwnode() used in the device_property*() APIs
can't find an 'of_node'. That's because the 'indio_dev->dev.of_node'
pointer isn't set until iio_device_register() is called. Set the pointer
earlier, next to where the ACPI companion is set, so that the device
property APIs work on DT systems.
Cc: Gwendal Grignou <gwendal@chromium.org>
Fixes: 7a3605bef8 ("iio: sx9310: Support ACPI property")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220331210425.3908278-1-swboyd@chromium.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-48-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-36-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-35-jic23@kernel.org
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220130193147.279148-34-jic23@kernel.org
To convert SX9360 status register ["REG_STAT"], into a channel
index, we need to right shift by |stat_offset|, not left shift.
Also the PROXSTAT bit (3) is for channel 1 (PHM, Phase Measured), not (PHR,
Phase Reference, channel 0), so the offset is 2 instead of 3.
Fixes: 1cdb4c47f7 ("iio:proximity:sx9360: Add sx9360 support")
Signed-off-by: Jongpil Jung <jongpil19.jung@samsung.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220122213444.745152-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in checks for
size and alignment.
Use sysfs_emit() to format the custom `noise_level_tripped` device
attribute of the as3935 driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211216185217.1054495-6-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Previously inconsistent with a space after { but not before }.
Tidy that up to avoid providing a bad example that might get copied
into other drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ivan Drobyshevskyi <drobyshevskyi@gmail.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-16-jic23@kernel.org
The spacing in this driver was inconsistent with a space after the {
but not before the }. Tidy this up to avoid providing a bad example
to copy into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-10-jic23@kernel.org
The spacing in this driver was inconsistent with a space after the {
but not before the }. Tidy this up to avoid providing a bad example
to copy into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-9-jic23@kernel.org
The spacing in this driver was inconsistent with a space after the {
but not before the }. Tidy this up to avoid providing a bad example
to copy into new drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-8-jic23@kernel.org
The spacing in this driver was inconsistent so make sure we have a space
after { and before } for the two id tables.
Avoid providing examples of this inconsistency that get copied into new
drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-7-jic23@kernel.org
Add support to configure sx9360 from dt-binding, to match device
hardware setup.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203800.290387-4-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A simplified version of SX9324, it only have one pin and
2 phases (aka channels).
Only one event is presented.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203800.290387-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Based on bindings/iio/proximity/semtech,sx9324.yaml, implement
retrieving sensor hardware property and alter default values.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-6-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Semtech SAR sensor SX9324 is an evolution of the SX9310:
It has 4 phases that can be configured to capture and process data
from any of 3 CS pins and provide independent detection:
proximity, table proximity or body proximity.
Gather antenna data:
echo sx9324-dev3 > trigger/current_trigger
echo 1 > scan_elements/in_proximity0_en
echo 1 > buffer/enable
od -v -An --endian=big -t d2 -w2 /dev/iio\:device3
(at 10Hz, the default).
Trigger events:
Setting:
thresh_falling_period: 2 (events)
thresh_rising_period: 2 (events)
in_proximity0_thresh_either_value: 300
in_proximity0_thresh_either_hysteresis: 72
using iio_event_monitor /dev/iio\:deviceX, approaching my hand to the
antenna pad, I see:
...
Event: time: 1634763907532035297, type: proximity, channel: 0, evtype:
thresh, direction: falling
Event: time: 1634763910138104640, type: proximity, channel: 0, evtype:
thresh, direction: rising
...
Datasheet: https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-4-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Before adding new Semtech sensors, move common logic to all Semtech SAR
sensor in its own file:
- interface with IIO subsystem,
- interrupt management,
- channel access conrol,
- event processing.
The change adds a bidirectional interface between sx93xx and sx_common.
The change is quite mechanical, as the impacted functions are moved
and renamed.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-3-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of using IIO_DEV_ATTR_SAMP_FREQ_AVAIL sysfs attribute,
add a _FREQ case in read_avail() to display the frequency table.
No change to |sampling_frequency_available| was observed.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
`buf` is cast to a const char *, but `buf` is already a const char *, so
the case is unnecessary.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO core handles a trigger ops with all NULL callbacks the
same as if the trigger ops itself was NULL.
Remove the empty trigger ops from the interrupt trigger driver to slightly
reduce the boilerplate code. Object size of the driver module is also
slightly reduced.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211031142130.20791-6-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use device_property_read_... to support both device tree and ACPI
bindings.
Simplify the logic for reading "combined-sensors" array, as we assume
it has been vetted at firmware build time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210728181757.187627-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove iio_claim/release and change it on mutex accordingly in
vcnl3020_write_proxy_samp_freq.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-4-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the possibility to run proximity sensor in periodic measurement
mode with thresholds.
Reported-by: kernel test robot <lkp@intel.com> #repeated include
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-3-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the probe hook to register the IIO device with
devm_iio_device_register() and register a hook with
devm_add_action_or_reset() to put the device in powerdown when the driver
gets unloaded.
Since the PM suspend/resume functions need only a reference to the
i2c_client object (which can be obtained from the base device object), the
i2c_set_clientdata() call can be removed.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210630131636.1563148-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These 2 functions only do I2C reads/writes and don't require any of the
private data of the driver.
They're also used in the PM suspend/resume part of the driver.
Converting them to take an i2c_client object as parameter simplifies things
a bit (especially in the suspend/resume) as the driver mostly needs the
reference for i2c_client, so no need to jump through hoops to get it from
the private data (as was done in many places).
The rfd77402_measure() function has also been converted to take an
i2c_client object, since it also does only I2C ops.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210630131636.1563148-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Using this new call makes it easy to handle any errors as a result
of runtime resume as it exits without leaving the reference count
elevated.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210516162103.1332291-6-jic23@kernel.org
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Here an explicit structure is not used, because the holes would
necessitate the addition of an explict memset(), to avoid a kernel
data leak, making for a less minimal fix.
Fixes: 1c28799257 ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-9-jic23@kernel.org
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()
Fixes: 37b1ba2c68 ("iio: proximity: as3935: fix buffer stack trashing")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-15-jic23@kernel.org
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()
Fixes: cb119d5350 ("iio: proximity: add support for PulsedLight LIDAR")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-14-jic23@kernel.org
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()
Fixes: 78f839029e ("iio: distance: srf08: add IIO driver for us ranger")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-13-jic23@kernel.org
Previously this driver used pm_runtime_sync_get() and did not handle any
errors that occurred. Moving to the new pm_runtime_resume_and_get() +
handle errors.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-26-jic23@kernel.org
Continuing from Alexandru Ardelean's introduction of the split between
driver modifiable fields and those that should only be set by the core.
This could have been done in two steps to make the actual move after
introducing iio_device_id() but there seemed limited point to that
given how mechanical the majority of the patch is.
Includes fixup from Alex for missing mxs-lradc-adc conversion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
When lidar_write_control() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.
Fixes: 4ac4e086fd ("iio: pulsedlight-lidar-lite: add runtime PM")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210412053204.4889-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With the current code, we want to read 4 entries from DT array
"semtech,combined-sensors". If there are less, we silently fail as
of_property_read_u32_array() returns -EOVERFLOW.
First count the number of entries and if between 1 and 4, collect the
content of the array.
Fixes: 5b19ca2c78 ("iio: sx9310: Set various settings from DT")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210326184603.251683-2-gwendal@chromium.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.
Given we call devm_iio_trigger_alloc() and devm_iio_device_alloc() with
dev as parent, we do not have to set data->trig->dev.parent to
indio_dev->dev.parent anymore.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-8-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use cocci semantic patch:
@@
expression trigger, P;
@@
trigger = devm_iio_trigger_alloc(P, ...);
...
- trigger->dev.parent = P;
To remove trigger->dev.parent, since it is set by default.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-3-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for a ChromeOS EC proximity driver that exposes a "front"
proximity sensor via the IIO subsystem. The EC decides when front
proximity is near and sets an MKBP switch 'EC_MKBP_FRONT_PROXIMITY' to
notify the kernel of proximity. Similarly, when proximity detects
something far away it sets the switch bit to 0. For now this driver
exposes a single sensor, but it could be expanded in the future via more
MKBP bits if desired.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20210211024601.1963379-4-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This DT property can be 0, 16, and then 64, but not 32. The math here
doesn't recognize this slight bump in the power of 2 numbers and
translates a DT property of 64 into the register value '3' when it
really should be '2'. Fix it by subtracting one more if the number being
translated is larger than 31. Also use clamp() because we're here.
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201202200252.986230-1-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This > should be >= to prevent reading one element beyond the end of
the sx9310_pthresh_codes[] array.
Fixes: ad2b473e2b ("iio: sx9310: Support setting proximity thresholds")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/X8XqwK0z//8sSWJR@mwanda
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add i2c_device_id table for the vl53l0x-i2c driver,
helps in device instantiation using i2c_new_client_device()
or from userspace in cases where device-tree based description
is not possible now, like device(s) on a gbphy i2c adapter
created by greybus.
Signed-off-by: Vaishnav M A <vaishnav@beagleboard.org>
Link: https://lore.kernel.org/r/20201018195102.GA814713@ubuntu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These properties need to be set during driver probe. Parse any DT
properties and replace the default register settings with the ones
parsed from DT.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20201007011735.1346994-7-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The rising and falling directions can be debounced in the hardware as
"close" and "far" debounce settings. Add support for these as rising and
falling debounce settings.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20201007011735.1346994-5-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for setting the hysteresis as a shifted value of a channel's
proximity threshold. Each channel can have a different threshold, but
the hysteresis applies to all channels as a right shift factor.
Therefore, duplicate the hysteresis value across all channels and make
it depend on the channel's proximity threshold. This is sort of odd but
seems to work in practice as most of the time only one channel is used.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20201007011735.1346994-4-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support to set the proximity thresholds for each channel.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20201007011735.1346994-3-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support to set the hardware gain of the channels as a multiplier of
2x, 4x, or 8x.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20201007011735.1346994-2-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
-----BEGIN PGP SIGNATURE-----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=yrII
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of features and cleanups for IIO in 5.10
We have a couple of changes that apply to large sets of drivers, so
I have grouped those to keep this short.
There are a few late breaking fixes in here that can wait for the
merge window.
dt yaml conversions
-------------------
* adi,ad7768-1
* adi,ad7949
* aspeed,ast2400
* cosmic,10001-adc
* dlg,da9150-gpadc
* fsl,imx25-gcq
* fsl,imx7d-adc
* fsl,vf610
* holt,hi8435
* marvell,berlin2-adc
* motorola,cpcap-adc
* nuvoton,nau7802
* nuvoton,npcm750-adc
* nxp,lpc1850-adc
* nxp,lpc3220
* sprd,sc2720-adc
* st,stmpe-adc
* ti,adc12138
* ti,ads1015
* ti,ads7950
* ti,twl4030-madc
Features
--------
* adxrs290
- Add triggered buffer support and expose data ready signal as a possible
trigger. Includes updating bindings.
- Add debugfs hooks for register access.
* mlx90632
- Add a clear user interface to override the measured ambient temperature.
* vl53l0x
- Add IRQ support including dt bindings.
Cleanups and minor fixes
------------------------
(groups)
Replace mlock with local lock:
* adf4350
* exynos-adc
* fls-imx25-gcq
* stm32-dac
devm use to simplify probe error handling and remove functions.
* adis16201
* adis16203
* adis16209
* adis16240
* adis16136
* adis16260
* adis16400
* adis16460
* adis16480
* adis library - drop unused adis_setup_buffer_and_trigger()
of_match_ptr removal and incorrect ACPI binding removal
of_match_ptr() rarely makes sense in an IIO driver as space saving
is trivial and it breaks ACPI PRP0001 based instantiation.
Mostly this series is about removing examples that get copied into new
drivers.
* ad2s1200
* ad5272
* ad5446
* ad5592r
* ad5593r
* ad5703
* ak8974
* ak8975
* ams-iaq-core
* as3935
* atlas-sensor
* ds1803
* hdc100x
* htu21
* icp10100
* lmp91000
* pulsedlight
* max30102
* max5432
* max5481
* mcp4018
* mcp4131
* mcp4531
* mcp4725
* ms5611
* ms5637
* si7020
* sgp30
* ti-dac082s085
* ti-dac5571
* tmp007
* tsys01
* vz89x
* zpa2326
kernel-doc fixes
* iio-core
* ad7303
* ad7947
* adis16080
* adis16400
* iio_dummy_evgen
* sgp30
Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp()
This is a long running effort. There are a few more drivers to come.
* inv_mpu6050
* itg3200
* si1145
* st_lsm6dsx
* ti-adc0832
* ti-adc12138
(not driver focused)
* MAINTAINERS
- Consolidate Analog Device IIO entries whilst removing Beniamin Bia.
- Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been
active for a long time and people are getting intermitted bounces.
* Add __printf() markings to a few functions that were missing them.
* drop some rotted documentation from staging.
* rework buffer sysfs file creation (precursor to multiple buffer support)
(individual drivers)
* ad5592r
- Fix use of true for IIO_SHARED_BY_TYPE
- Tidy up locking and indentation.
* ad9467
- Improve error message on chip-id missmatch.
- Use more appropriate error value if chip-id not recognised.
* adis-library
- Simplify burst mode handling.
* adxrs290
- Make sure to switch device to standby mode during remove.
* as73211
- Increase measurement timeout as seems some devices are slower.
* bma180
- Fix use of true fo IIO_SHARED_BY_TYPE
* exynos_adc
- Update binding to require second interrut with touch screen.
- Update binding to not require syscon on S5Pv210
* hmc5843
- Fix use of true for IIO_SHARED_BY_TYPE
* inv_mpu6050
- Use regmap_noinc_read() for fifo reading.
* palmas_gpadc
- Use module_platform_driver() to remove boilerplate.
* meson-saradc
- style consistency fixes
* rockchip_saradc
- Allow compile testing with !ARM.
* st_lsm6dsx
- Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision.
- Fix an issue with unchecked return value.
* stm32-adc
- Fix a missing return introduced in dev_err_probe() patch earlier in
cycle.
* sx9310
- Prefer async mode for probe as paticularly slow startup.
* vcnl4000
- Add missing interrupt property to dt binding.
* tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings: iio: vishay,vcnl4000: add interrupts property
iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads.
iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
iio:adc:ti-adc12138 Fix alignment issue with timestamp
iio:adc:ti-adc0832 Fix alignment issue with timestamp
iio:imu:st_lsm6dsx Fix alignment and data leak issues
iio:light:si1145: Fix timestamp alignment and prevent data leak.
iio:gyro:itg3200: Fix timestamp alignment and prevent data leak.
iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return
iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock
dt-bindings:iio:adc:holt,hi8435 yaml conversion
dt-bindings:iio:adc:adi,ad7768-1 yaml conversion
dt-bindings:iio:adc:adi,ad7949 yaml conversion
dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion
dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion
dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion
dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion
dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion
dt-bindings:iio:adc:ti,ads1015 yaml conversion
...
VL53L0X can be configured to use interrupt pin (GPIO1)
to notify host about readiness of new measurement.
If interrupt pin is not specified, driver still uses polling.
Signed-off-by: Ivan Drobyshevskyi <drobyshevskyi@gmail.com>
Link: https://lore.kernel.org/r/20200916074458.873359-2-drobyshevskyi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This prevents use of this driver with ACPI via PRP0001 and is
an example of an anti pattern I'm trying to remove from IIO.
Hence drop from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-34-jic23@kernel.org
This change allows the driver to be used with ACPI PRP0001 and removes
an antipattern that I want to avoid being copied into new IIO drivers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-33-jic23@kernel.org
This makes the existing code easier to read and will make the following
patch a little simpler.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200910173242.621168-32-jic23@kernel.org
On one board I found that:
probe of 5-0028 returned 1 after 259547 usecs
While some of this time is attributable to the pile of i2c transfers
that we do at probe time, the lion's share (over 200 ms) is sitting
waiting in the polling loop in sx9310_init_compensation() waiting for
the hardware to indicate that it's done.
There's no reason to block probe of all other devices on our probe.
Turn on async probe.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Link: https://lore.kernel.org/r/20200901081920.v2.1.Id02b2f451b3eed71ddd580f4b8b44b3e33e84970@changeid
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We shouldn't need to set default irq trigger flags here as the firmware
should have properly indicated the trigger type, i.e. level low, in the
DT or ACPI tables.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable the main power supply (vdd) and digital IO power supply (svdd)
during probe so that the i2c communication and device works properly on
boards that aggressively power gate these supplies.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This struct member isn't used. Drop it.
Fixes: 72ad02b15d ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Miscellaneous format fixes throughout the whole file.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Improves readability by storing &client->dev in a local variable.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Checks for non-zero return values to signal error conditions.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify compensation stage by using regmap_read_poll_timeout().
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Uses for_each_set_bit() macro to loop over channel bitmaps.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Makes use __aligned(8) to ensure that the timestamp is correctly aligned
when we call io_push_to_buffers_with_timestamp().
Also makes use of sizeof() for regmap_bulk_read instead of static value.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Uses .probe_new in place of .probe. Also uses device_get_match_data()
for whoami matching.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoids unused warnings due to acpi/of table macros.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes enable/disable irq handling at various points. The driver needs to
only enable/disable irqs if there is an actual irq handler installed.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Follows spec sheet for macro declarations.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte s16 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
In this case the forced alignment of the ts is necessary to ensure
correct padding on x86_32 where the s64 would only be 4 byte aligned.
Fixes: 16b0526153 ("mb1232.c: add distance iio sensor with i2c")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All devices using a triggered buffer need to attach and detach the trigger
to the device in order to properly work. Instead of doing this in each and
every driver by hand move this into the core.
At this point in time, all drivers should have been resolved to
attach/detach the poll-function in the same order.
This patch removes all explicit calls of iio_triggered_buffer_postenable()
& iio_triggered_buffer_predisable() in all drivers, since the core handles
now the pollfunc attach/detach.
The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's
not immediately obvious that removing the hooks doesn't break anything.
Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board.
All seems to be fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------
The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.
JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since there will be some changes to how iio_priv_to_dev() is implemented,
it could be that the helper becomes a bit slower, as it will be hidden away
in the IIO core.
But even without that rework, this looks like it can pass the 'indio_dev'
object to ping_read() and obtain the state struct via iio_priv() which is a
preferred practice than going back-n-forth (getting the state-struct, then
using iio_priv_to_dev() to get the indio_dev object back).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Proximity sensor driver based on light/vcnl4000.c code.
For now supports only the single on-demand measurement.
The VCNL3020 is a fully integrated proximity sensor. Fully
integrated means that the infrared emitter is included in the
package. It has 16-bit resolution. It includes a signal
processing IC and features standard I2C communication
interface. It features an interrupt function.
Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
New device support
* ad7476
- Add ad7091 support (ID only)
* ad9467
- New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
- New driver to support ADIs generic AXI ADC IP core, used to provide
high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
paired with a device using a slow configuration interface (spi etc)
Includes DT bindings and some fixes for fpga headers.
* bmg160
- Add support for BMI088 (ID only)
* max1241
- New driver for this ADC.
* st_sensors
- Add support for LIS2HH12 accelerometer
* sx9310
- New driver supporting sx9310 and sx9311 proximity sensors.
Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000
Features
* st_lsm6dsx
- Add LIS3MDL as a possible sensor hub device.
* vcnl4000
- Add new concept of near level (from DT) to provide to userspace which
often needs to have some calibrated concept of 'near'.
Cleanups, minor fixes etc.
* core
- Use snprintf for functions where strings are built and there is
potential for overflow.
- Correct docs to indicate mlock should not be used directly by drivers.
- Fix up accidental dropping of a patch to use bitmap_zalloc.
- Stop allowing enabling of buffers with no channels enabled.
- Drop unused 'stufftoread' from iio_buffer.
- Drop scan_el_attrs form iio_buffer as unused.
- Reorder sanity checks in __iio_device_register to fail earlier.
- Drop all the devm_ runregister / free functions from IIO as they
were never used and encourage poor design.
* dma-buffer
- Tidy up includes.
* dma-engine-buffer
- Provide dev-managed allocator.
- Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
- Replace some unnecessary casts of error ptrs and whilst there.
use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
- Drop casts in calls to regmap_bulk_read as they make no sense.
- Use devm_platform_ioremap_resource to reduce boilerplate.
- Fix typos in Analog Devices.
* counters/104-quad
- Add Syed Nayyar Waris as an additional maintainer.
* ad7476
- Generate CONVST signal internally rather than requiring external
trigger. Add sysfs read back as can now do so.
- use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
- Switch to read_avail from explicit attribute. Mostly done to avoid
confusing people with a - sign (without surounding spaces) that
was correct but checkpatch didn't like.
* adis library
- Add missing newlines at end of error messages.
* adis16400
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
- Move some channel definitions into individual drivers to avoid
having to deal with complex options.
* ak8974
- Silence an error on deffered probe.
* bmp280
- Harden against IRQ before registration.
- Convert to read_avail instead of opencoding the equivalent.
- Explicitly mark GPIO as optional.
- Cleanup casts.
- Remove line breaks from strings.
* htts221
- Replace direct access to platform_data with dev_get_platdata().
- Use device properties rather than device tree ones to allow ACPI
probing.
- Casting cleanups.
* intel_mrfld_adc
- Don't use unaligned accessor for aligned data.
* isl29125
- Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
- Remove comp to bool.
* max1363
- Stop using mlock from the iio_dev directly in favour of a local lock
with clearly defined scope.
* max30100
- Use generic device properties to allow ACPI probe.
* mpu6050
- Convert to i2c_new_client_device.
- Add debugfs register access.
* st_lsm6dsx
- Provide means of configuring full scale on slave device if supported.
- Drop include of st_sensors header to get one value. Its not otherwise
used by this driver.
* st-sensors
- Replace direct access to platform_data with dev_get_platdata().
- Casting cleanups.
- Avoid splitting strings.
* st_uvis25
- Casting cleanups.
* tsl2563
- Typo fix.
* tsl2772
- scnprintf in a non obvious string building usecase. Note also 'fixes'
a wrong calculation of remaining space that couldn't actually cause
any trouble as there was lots of room.
* xilinx-xadc
- Fix Lars-Peter spelling his own name wrong :) + additional typos.
-----BEGIN PGP SIGNATURE-----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=DyTF
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
New device support
* ad7476
- Add ad7091 support (ID only)
* ad9467
- New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
- New driver to support ADIs generic AXI ADC IP core, used to provide
high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
paired with a device using a slow configuration interface (spi etc)
Includes DT bindings and some fixes for fpga headers.
* bmg160
- Add support for BMI088 (ID only)
* max1241
- New driver for this ADC.
* st_sensors
- Add support for LIS2HH12 accelerometer
* sx9310
- New driver supporting sx9310 and sx9311 proximity sensors.
Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000
Features
* st_lsm6dsx
- Add LIS3MDL as a possible sensor hub device.
* vcnl4000
- Add new concept of near level (from DT) to provide to userspace which
often needs to have some calibrated concept of 'near'.
Cleanups, minor fixes etc.
* core
- Use snprintf for functions where strings are built and there is
potential for overflow.
- Correct docs to indicate mlock should not be used directly by drivers.
- Fix up accidental dropping of a patch to use bitmap_zalloc.
- Stop allowing enabling of buffers with no channels enabled.
- Drop unused 'stufftoread' from iio_buffer.
- Drop scan_el_attrs form iio_buffer as unused.
- Reorder sanity checks in __iio_device_register to fail earlier.
- Drop all the devm_ runregister / free functions from IIO as they
were never used and encourage poor design.
* dma-buffer
- Tidy up includes.
* dma-engine-buffer
- Provide dev-managed allocator.
- Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
- Replace some unnecessary casts of error ptrs and whilst there.
use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
- Drop casts in calls to regmap_bulk_read as they make no sense.
- Use devm_platform_ioremap_resource to reduce boilerplate.
- Fix typos in Analog Devices.
* counters/104-quad
- Add Syed Nayyar Waris as an additional maintainer.
* ad7476
- Generate CONVST signal internally rather than requiring external
trigger. Add sysfs read back as can now do so.
- use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
- Switch to read_avail from explicit attribute. Mostly done to avoid
confusing people with a - sign (without surounding spaces) that
was correct but checkpatch didn't like.
* adis library
- Add missing newlines at end of error messages.
* adis16400
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
- Move some channel definitions into individual drivers to avoid
having to deal with complex options.
* ak8974
- Silence an error on deffered probe.
* bmp280
- Harden against IRQ before registration.
- Convert to read_avail instead of opencoding the equivalent.
- Explicitly mark GPIO as optional.
- Cleanup casts.
- Remove line breaks from strings.
* htts221
- Replace direct access to platform_data with dev_get_platdata().
- Use device properties rather than device tree ones to allow ACPI
probing.
- Casting cleanups.
* intel_mrfld_adc
- Don't use unaligned accessor for aligned data.
* isl29125
- Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
- Remove comp to bool.
* max1363
- Stop using mlock from the iio_dev directly in favour of a local lock
with clearly defined scope.
* max30100
- Use generic device properties to allow ACPI probe.
* mpu6050
- Convert to i2c_new_client_device.
- Add debugfs register access.
* st_lsm6dsx
- Provide means of configuring full scale on slave device if supported.
- Drop include of st_sensors header to get one value. Its not otherwise
used by this driver.
* st-sensors
- Replace direct access to platform_data with dev_get_platdata().
- Casting cleanups.
- Avoid splitting strings.
* st_uvis25
- Casting cleanups.
* tsl2563
- Typo fix.
* tsl2772
- scnprintf in a non obvious string building usecase. Note also 'fixes'
a wrong calculation of remaining space that couldn't actually cause
any trouble as there was lots of room.
* xilinx-xadc
- Fix Lars-Peter spelling his own name wrong :) + additional typos.
* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
iio: magnetometer: ak8974: Silence deferred-probe error
Documentation: ABI: document IIO in_proximity_nearlevel file
iio: vcnl4000: Export near level property for proximity sensor
dt-bindings: iio: light: vcnl4000: Add proximity-near-level
dt-bindings: iio: Introduce common properties for iio sensors
dt-bindings: iio: vcnl4000: convert bindings to YAML format
iio: Fix misspellings of "Analog Devices"
iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
iio: adc: at91-adc: Use devm_platform_ioremap_resource
iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
iio: buffer: drop devm_iio_kfifo_free() API call
iio: buffer: drop devm_iio_hw_consumer_free() API call
...
Add SEMTECH SX9310/9311 driver.
The device has the following entry points:
Usual frequency:
- sampling_frequency
- sampling_frequency_available
Instant reading of current values for different sensors:
- in_proximity0_raw
- in_proximity1_raw
- in_proximity2_raw
- in_proximity3_comb_raw
and associated events in events/
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
pa_laser_ping_cfg should be set in of_ping_match
instead of pa_ping_cfg.
Fixes: 7bb501f49d ("iio: ping: add parallax ping sensors")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add suspend and resume operations for being used by optional power
management.
The suspend function is switching off an GPIO which can be used by the
hardware to switch power off. The resume function is switching the GPIO
on and sleeps an adjustable time to give the device a chance to be up
and running.
If activated the driver gets into autosuspend after some time of
inactivity.
Suggested-by: Franz Parzer <rpi-receiver@htl-steyr.ac.at>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver includes <linux/gpio.h> and <linux/of_gpio.h> yet
fails to use symbols from any of the include files, so drop
these includes.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for parallax ping and laser ping sensors with just one pin
for trigger and echo signal.
This driver is based on srf04. In contrast to it it's necessary to
change direction of the pin and to request the irq just for the period
when the echo is rising and falling. Because this adds a lot of cases
there is this individual driver for handling this type of sensors.
Add a new configuration variable CONFIG_PING to Kconfig and Makefile.
Julia reported an issue with failing to unlock a mutex in some error
paths.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sparse identified the following
CHECK drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c:144:24: warning: cast to restricted __be16
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c:144:24: warning: cast to restricted __be16
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c:144:24: warning: cast to restricted __be16
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c:144:24: warning: cast to restricted __be16
This cleans up by adding a local variable to hold the value whilst
it is __be16 before applying endian converstion into eventual destination.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
The measured time value in the driver is limited to the maximum distance
which can be read by the sensor. This limitation was wrong and is fixed
by this patch.
It also takes into account that we are supporting a variety of sensors
today and that the recently added sensors have a higher maximum
distance range.
Changes in v2:
- Added a Tested-by
Suggested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Tested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc:<Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_triggered_buffer_predisable() should be called last, to detach the
poll func after the devices has been suspended.
This change re-organizes things a bit so that the postenable & predisable
are symmetrical. It also converts the preenable() to a postenable().
Not stable material as there is no known problem with the current
code, it's just not consistent with the form we would like all the
IIO drivers to adopt so as to allow subsystem wide changes.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This should be RFD77402, not RFD77420.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is subject to the terms and conditions of version 2 of the
gnu general public license see the file copying in the main
directory of this archive for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 55 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
reword configuration option for SRF04
list supported types in help text
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
add Maxbotix LV ultrasonic sensor types mb1000, mb1010, mb1020, mb1030
and mb1040
add a configuration struct with the different trigger pulse lengths
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add I2CXL-MaxSonar ultrasonic distance sensors of types mb1202, mb1212,
mb1222, mb1232, mb1242, mb7040, mb7137 using an i2c interface
Implemented functionality:
- reading the distance via in_distance_raw
- buffered mode with trigger
- make use of interrupt to announce completion of ranging
Add mb1232 driver to Kconfig and Makefile
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver's probe() uses a mix of devm_ and non-devm_ functions. This
means that the remove order will not be the exact opposite of the probe
order.
Remove order:
1. remove() executes:
iio_device_unregister
iio_triggered_buffer_cleanup
iio_trigger_unregister
(A)
2. core frees devm resources in reverse order:
free_irq
iio_trigger_free
iio_device_free
In (A) the trigger has been unregistered, but the irq handler is still
registered and active, so the trigger may still be touched via
interrupt -> as3935_event_work. This is a potential use-after-unregister.
Given that the delayed work is never canceled explicitly, it may run even
after iio_device_free. This is a potential use-after-free.
Solution: convert all probe functions to their devm_ equivalents.
Add a devm callback, called by the core on remove right after irq_free,
which explicitly cancels the delayed work. This will guarantee that all
resources are freed in the correct order.
As an added bonus, some boilerplate code can be removed.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver was originally written by ST in 2016 as a misc input device
driver, and hasn't been maintained for a long time. I grabbed some code
from it's API and reformed it into an iio proximity device driver.
This version of driver uses i2c bus to talk to the sensor and
polling for measuring completes, so no irq line is needed.
It can be tested with reading from
/sys/bus/iio/devices/iio:deviceX/in_distance_input
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With gcc 4.1.2:
drivers/iio/proximity/isl29501.c: In function ‘isl29501_register_write’:
drivers/iio/proximity/isl29501.c:235: warning: ‘msb’ may be used uninitialized in this function
While this is a false positive, it can easily be avoided by removing the
"msb" intermediate variable.
Remove the "lsb" intermediate variable for consistency.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds support for the ISL29501 Time of Flight sensor.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The uptick in staging cleanup is partly due to GSoC Applications
process being underway and one of Daniel's tasks being to try
cleaning up an IIO driver to move out of staging.
Naturally there is some normal staging cleanup progress in here
as well.
New device support
* Microchip mcp4018
- New driver supproting MCP4017, MCP4018 and MCP4019 digital pots.
* On Semiconductor lv0104cs
- New driver to support this ambient light sensor.
Cleanup
* axp20x_adc
- remove a !! in favour of clear ternary operator.
* ad2s1210 (staging cleanup)
- Reorganise to avoid ending a line with [
- Remove some unnecessary defines.
- Remove unsed variable.
* ad5380
- Replace magic 0 with IIO_CHAN_INFO_RAW
* ad5764
- Replace magic 0 with IIO_CHA_INFO_RAW
* ad7150 (staging cleanup)
- Align arguements with parenthesis.
* ad7152 (staging cleanup)
- Align arguements.
* ad7746 (staging cleanup)
- Align arguements.
* ad7816
- Remove pointless void pointer cast.
* ade7753
- Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing
checkpatch (this macro didn't really help anyway). Also drop the
macro from the meter.h header.
* ade7754 (staging cleanup)
- Add names to funciton definition arguements.
- Align arguements with open parenthesis where possible.
* ade7758 (staging cleanup)
- Remove __func__ from dev_dbg statements as provided by dynamic
debug anyway.
- Align arguements with open parenthesis where possible.
* ade7759 (staging cleanup)
- Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing
checkpatch.
* adis16201 (staging cleanup)
- Headers in alphabetical order.
- Blank lines before returns.
* adis16209 (staging cleanup)
- Headers in alphabetical order
- Change some definition names to make them more meaningful (2 rounds
of this).
- Add explicit _REG prefix to register names to make them
obviously different from fields within those registers.
- Remove some superflous comments and group definitions better.
- Use a switch statement to make it semantically obvious that we
only have two options (rather than an unlimited 'else').
- Use sign_extent32 instead of open coding.
* adt7316 (staging cleanup)
- Move an export next to symbol.
* bmc150
- drop redundant __func__ in dynamic debug.
* ccs811
- Rename varaible to better reflect what it does.
* cros_ec
- Reduce sampling frequency before suspending to avoid preventing
suspend.
* dummy
- Correct whitespace in Kconfig.
- Add extra description in Kconfig.
* ds1803
- Remove a VLA which we always know is 2 long.
* hid-sensor-accel
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-gyro
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-light
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-magn
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* lm3533
- Replace magic number 0 by IIO_CHAN_INFO_RAW
* mlx90632
- Squash a smatch warning - no runtime effect.
* stm32_dfsdm:
- Cleanup the dt bindings.
* sx9500
- Add GPIO ACPI mapping table to behave correctly when firmware
doesn't provide the mapping.
* tsl2x7x (staging cleanup)
- Fix the proximity sensor functionality.
- Remove platform data provided power functions. There are much
better ways to do this these days.
- Introduce some common functions to avoid various repititions.
- Stop using mutex_trylock when mutex_lock and wait a bit is fine.
- Improve error handling in various places.
- Drop some 'Camel case' (which wasn't actually strickly camel case
but was a bit odd.
- Drop some _available sysfs attributes for things that don't exist
(for particular supported parts).
-----BEGIN PGP SIGNATURE-----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=6eOr
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.17b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, features and cleanup for IIO in the 4.17 cycle
The uptick in staging cleanup is partly due to GSoC Applications
process being underway and one of Daniel's tasks being to try
cleaning up an IIO driver to move out of staging.
Naturally there is some normal staging cleanup progress in here
as well.
New device support
* Microchip mcp4018
- New driver supproting MCP4017, MCP4018 and MCP4019 digital pots.
* On Semiconductor lv0104cs
- New driver to support this ambient light sensor.
Cleanup
* axp20x_adc
- remove a !! in favour of clear ternary operator.
* ad2s1210 (staging cleanup)
- Reorganise to avoid ending a line with [
- Remove some unnecessary defines.
- Remove unsed variable.
* ad5380
- Replace magic 0 with IIO_CHAN_INFO_RAW
* ad5764
- Replace magic 0 with IIO_CHA_INFO_RAW
* ad7150 (staging cleanup)
- Align arguements with parenthesis.
* ad7152 (staging cleanup)
- Align arguements.
* ad7746 (staging cleanup)
- Align arguements.
* ad7816
- Remove pointless void pointer cast.
* ade7753
- Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing
checkpatch (this macro didn't really help anyway). Also drop the
macro from the meter.h header.
* ade7754 (staging cleanup)
- Add names to funciton definition arguements.
- Align arguements with open parenthesis where possible.
* ade7758 (staging cleanup)
- Remove __func__ from dev_dbg statements as provided by dynamic
debug anyway.
- Align arguements with open parenthesis where possible.
* ade7759 (staging cleanup)
- Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing
checkpatch.
* adis16201 (staging cleanup)
- Headers in alphabetical order.
- Blank lines before returns.
* adis16209 (staging cleanup)
- Headers in alphabetical order
- Change some definition names to make them more meaningful (2 rounds
of this).
- Add explicit _REG prefix to register names to make them
obviously different from fields within those registers.
- Remove some superflous comments and group definitions better.
- Use a switch statement to make it semantically obvious that we
only have two options (rather than an unlimited 'else').
- Use sign_extent32 instead of open coding.
* adt7316 (staging cleanup)
- Move an export next to symbol.
* bmc150
- drop redundant __func__ in dynamic debug.
* ccs811
- Rename varaible to better reflect what it does.
* cros_ec
- Reduce sampling frequency before suspending to avoid preventing
suspend.
* dummy
- Correct whitespace in Kconfig.
- Add extra description in Kconfig.
* ds1803
- Remove a VLA which we always know is 2 long.
* hid-sensor-accel
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-gyro
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-light
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-magn
- Replace magic number 0 by IIO_CHAN_INFO_RAW.
* lm3533
- Replace magic number 0 by IIO_CHAN_INFO_RAW
* mlx90632
- Squash a smatch warning - no runtime effect.
* stm32_dfsdm:
- Cleanup the dt bindings.
* sx9500
- Add GPIO ACPI mapping table to behave correctly when firmware
doesn't provide the mapping.
* tsl2x7x (staging cleanup)
- Fix the proximity sensor functionality.
- Remove platform data provided power functions. There are much
better ways to do this these days.
- Introduce some common functions to avoid various repititions.
- Stop using mutex_trylock when mutex_lock and wait a bit is fine.
- Improve error handling in various places.
- Drop some 'Camel case' (which wasn't actually strickly camel case
but was a bit odd.
- Drop some _available sysfs attributes for things that don't exist
(for particular supported parts).
In order to satisfy GPIO ACPI library requirements convert users of
gpiod_get_index() to correctly behave when there no mapping is provided
by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We want the IIO/Staging fixes in here, and to resolve a merge problem
with the move of the fsl-mc code.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add GPLv2+ SPDX identifier and update email for author's drivers.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Functions for triggered buffer support are needed by this module.
If they are not defined accidentally by another driver, there's an error
thrown out while linking.
Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Fixes: a831959371 ("iio: srf08: add triggered buffer support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This resolves the merge issue pointed out by Stephen in
drivers/iio/adc/meson_saradc.c.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 0f0796509c
("iio: remove gpio interrupt probing from drivers that use a single interrupt")
removed custom IRQ assignment for the drivers which are enumerated via
ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as
GpioIo() resource and thus automatic IRQ allocation will fail.
Partially revert the commit 0f0796509c to restore original behaviour.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add new ACPI ID for sx9500 as had been found on prototype board.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd atomisp
cleanups (take the media tree's version).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
g3ioPBqmqC/2DSbldr2o
=/ebw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver for RF Digital RFD77402 VCSEL (vertical-cavity surface-emitting
laser) Time-of-Flight (ToF) sensor to measure distance up to 2 m with
millimeter precision
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Most applications are too noisy to allow the default noise and
watchdog settings, and thus need to be configurable via DT
properties.
Also default settings to POR defaults on a reset, and register
distuber interrupts as noise since it prevents proper usage.
Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The equivalent of both of these are now done via macro magic when
the relevant register calls are made. The actual structure
elements will shortly go away.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
srf02 added with support for i2c interface
Attributes for setting max range or sensitivity are omitted for the case of
srf02 type sensor, because they are not supported by the hardware.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
the driver as device tree compatible string.
It was necessary to prepare the source for supplementary sensors. This is
done by enum srf08_sensor_type.
The most significiant difference between srf08 and srf10 is another range
and values of register gain (in the driver it's call sensitivity).
Therefore the array of it is extended and dependent of the sensor type.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for triggered buffers.
Data format is quite simple:
distance 16 Bit
alignment 48 Bit
timestamp 64 Bit
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Added MODULE_DEVICE_TABLE for device tree bindings.
It used to work without it by using the i2c_device_id table, but adding the
table makes everything clear and documented.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A few reverts here. One was a general failure to notice a device was already
supported by another driver. The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.
Reverts
* bma180
- Revert addition of support for the BMA250E it is already supported by
the bmc150-accel and better supported at that. Oops.
* hi8435
- The fix for cleanup of the reset gpio stuff isn't a good way to go. It
breaks systems where an inverting level convertor is used. The right fix
is to make the original devicetree correct - even if it involves patching
the devicetree in kernel.
New Device Support
* stm32-adc
- STM32H7 support and bindings.
Features
* core
- add a hardware triggered operating mode for systems in which the actual
trigger is never seen by the kernel. This is typically only used when
a device 'can' use other triggers, but if a particular magic one is
enabled the interrupt is effectively handled in hardware and we never see
it.
* st-lsm6dsx
- support active low interrupts.
* stm32-adc
- Make the core adc clock optional as not all hardware supported requires it.
- Make the bus clock optional in the per instance driver as it may be shared
by all instances of the ADC and is handled by the core.
- Rework to have a data structure representing the device type specific
elements.
* stm32-trigger (and counter)
- Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
- Add an attribute to configure device modes for quadrature counting etc.
Clean ups and minor fixes
* IIO core.
- use __sysfs_match_string() helper rather than open coding the same.
* ad7791
- use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
- handle return value of clk_prepare_enable
* cpcap
- Fix default register values and ensure the battery thermistor is enabled
correctly.
- Fix the reported die temperature where we can - docs are lacking.
- Remove the hung interrupt quirk as no longer happens due to fix in the
mfd driver.
* hi8435
- Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
- Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
- Make the use of iio_info_mask* elements consistent for all channels.
This doesn't have any visible effect, but acts as clear documentation of
which channels various resulting attributes apply to.
* lpc32xx
- handle the return value of clk_prepare_enable.
* meson-saradc
- NULL instead of 0 for pointer.
* mma9551
- use NULL for GPIO connection ID to aid implementation fo ACPI support.
Here the connection ID doesn't actually tell us anything and it is much
easier to deal with the driver if it's not there.
* mpu6050
- Fix lock issues through use of a local mux.
- Replace sprintf with scnprintf as appropriate.
- Check whoami against all known values. This allows for a small number of
boards where we are really fishing for the part not being present at all.
It is unfortunately common to have undescribed changes to use newer chips.
We paper over this but just emitting a warning for those cases as long as
we know about.
* mxs-lradc
- Fix some non static warnings.
* rcar-adc
- Part of making the naming for this part consistent across the kernel.
* st_accel
- drop some spi_device_id entries for variants with no SPI support
* st_magn
- drop some spi_device_id entries for variants with no SPI support.
* sx9500
- Use devm_gpiod_get instead of indexed value with an index of 0 on all
occasions.
* twl4030
- Drop unused twl4030_get_madc_conversion as callers removed now throughout
kernel.
- Unexport twl4030_madc_conversion() as no used only within this driver.
- Drop twl4030_madc_user_params as not used now.
- Drop twl4030_madc_request.func_cb as not used now.
- Fold the twl4030-madc.h header into the driver as no longer used anywhere
else in the kernel.
* xilinx
- Handle the return value of clk_prepare_enable
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAllJSCURHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FogTTQ//bbAzHKB0qTwusFN5jrz1JqjGj3+bMXH/
KumP4nj7NzwKBe4tDe40FsdkZ4c+Um8pK2Aj7iJZojwTcCi02VVjbM++Gj0akMTZ
MIlrEkTvqVsmVFG085hloSiFU2xXfTnfQmp19M9QtyDnHkgBMo9sOFnBK3EG+Se4
NIliUvq8PJzCjTRVafSeSFNoDMwXXQTIKhfq8TDSeOG9o5mCTgAdy8yGiZ2ag/Ok
peFfwauGs9Gg6tRour7UxccawuLnuzPNzwzUUSG3gkdIUTQVD6YHAzXzwblnB5P6
0ZcErJpGSLAYcHQH310ZRTizhhW+vi+ftWUkps81xqpmFp3+EydVnJS0MZXYgM2o
Cv6wbohp9w22I5/B9TMEfL7vnj1i4iZoJfi00Su1HBDHBiNpXISRc/fnkRMWavhr
gvypyxngQmXm1JN/R8UMbJQsSpH3TN07AYF1qx0Tktfyx4S18rdW4hwt+kBNe9ni
5G9xQU8IhmN8yvHMsTvZHbAmbuOR6iaghx3arf65qdHPvKSQ/nTSlran9U1JPvyJ
tWVKtPaY5zEGgkQBmWee+qWkWOBGYDC4nmTwijB0u61Deq+5hGg55cZPd0fSXLMg
6ecNg2v7zrdYldulOpfdNUEOrXa/NYBEAuYUNvccp8DArOqdazkCyO3DlDFDUXRw
RKNE7Btx/rU=
=2fJI
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanups for the 4.13 cycle.
A few reverts here. One was a general failure to notice a device was already
supported by another driver. The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.
Reverts
* bma180
- Revert addition of support for the BMA250E it is already supported by
the bmc150-accel and better supported at that. Oops.
* hi8435
- The fix for cleanup of the reset gpio stuff isn't a good way to go. It
breaks systems where an inverting level convertor is used. The right fix
is to make the original devicetree correct - even if it involves patching
the devicetree in kernel.
New Device Support
* stm32-adc
- STM32H7 support and bindings.
Features
* core
- add a hardware triggered operating mode for systems in which the actual
trigger is never seen by the kernel. This is typically only used when
a device 'can' use other triggers, but if a particular magic one is
enabled the interrupt is effectively handled in hardware and we never see
it.
* st-lsm6dsx
- support active low interrupts.
* stm32-adc
- Make the core adc clock optional as not all hardware supported requires it.
- Make the bus clock optional in the per instance driver as it may be shared
by all instances of the ADC and is handled by the core.
- Rework to have a data structure representing the device type specific
elements.
* stm32-trigger (and counter)
- Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
- Add an attribute to configure device modes for quadrature counting etc.
Clean ups and minor fixes
* IIO core.
- use __sysfs_match_string() helper rather than open coding the same.
* ad7791
- use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
- handle return value of clk_prepare_enable
* cpcap
- Fix default register values and ensure the battery thermistor is enabled
correctly.
- Fix the reported die temperature where we can - docs are lacking.
- Remove the hung interrupt quirk as no longer happens due to fix in the
mfd driver.
* hi8435
- Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
- Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
- Make the use of iio_info_mask* elements consistent for all channels.
This doesn't have any visible effect, but acts as clear documentation of
which channels various resulting attributes apply to.
* lpc32xx
- handle the return value of clk_prepare_enable.
* meson-saradc
- NULL instead of 0 for pointer.
* mma9551
- use NULL for GPIO connection ID to aid implementation fo ACPI support.
Here the connection ID doesn't actually tell us anything and it is much
easier to deal with the driver if it's not there.
* mpu6050
- Fix lock issues through use of a local mux.
- Replace sprintf with scnprintf as appropriate.
- Check whoami against all known values. This allows for a small number of
boards where we are really fishing for the part not being present at all.
It is unfortunately common to have undescribed changes to use newer chips.
We paper over this but just emitting a warning for those cases as long as
we know about.
* mxs-lradc
- Fix some non static warnings.
* rcar-adc
- Part of making the naming for this part consistent across the kernel.
* st_accel
- drop some spi_device_id entries for variants with no SPI support
* st_magn
- drop some spi_device_id entries for variants with no SPI support.
* sx9500
- Use devm_gpiod_get instead of indexed value with an index of 0 on all
occasions.
* twl4030
- Drop unused twl4030_get_madc_conversion as callers removed now throughout
kernel.
- Unexport twl4030_madc_conversion() as no used only within this driver.
- Drop twl4030_madc_user_params as not used now.
- Drop twl4030_madc_request.func_cb as not used now.
- Fold the twl4030-madc.h header into the driver as no longer used anywhere
else in the kernel.
* xilinx
- Handle the return value of clk_prepare_enable
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Using iio_trigger_poll() can oops when multiple interrupts
happen before the first is handled.
Use iio_trigger_poll_chained() instead and use the timestamp
when processed, since it will be in theory be 2 ms max latency.
Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
AS3935 interrupt mask has been incorrect so valid lightning events
would never trigger an buffer event. Also noise interrupt should be
BIT(0).
Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
CC: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move out of storm check to apply to IIO_CHAN_INFO_RAW so the reported
results are constant between the former and the IIO_CHAN_INFO_PROCESSED
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
According to the datasheet the RCO must be recalibrated
on every power-on-reset. Also remove mutex locking in the
calibration function since callers other than the probe
function (which doesn't need it) will have a lock.
Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
As these are rather late in the cycle, they may sneak over into 4.12.
There is a fix for a regression caused by another fix (hid sensors
hardware seems to vary a lot in how various corner cases are handled).
* ad7303
- fix channel description. Numeric values were being passed as characters
presumably leading to garbage from the userspace interface.
* as3935
- the write data macro was wrong so fix it.
* bmp280
- incorrect handling of negative values as being unsigned broke humidity
calculation.
* hid-sensor
- Restore the poll and hysteresis values after resume as some hardware
doesn't do it.
* stm32-trigger
- buglet in reading the sampling frequency
-----BEGIN PGP SIGNATURE-----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=H5KS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fifth set of IIO fixes for the 4.11 cycle.
As these are rather late in the cycle, they may sneak over into 4.12.
There is a fix for a regression caused by another fix (hid sensors
hardware seems to vary a lot in how various corner cases are handled).
* ad7303
- fix channel description. Numeric values were being passed as characters
presumably leading to garbage from the userspace interface.
* as3935
- the write data macro was wrong so fix it.
* bmp280
- incorrect handling of negative values as being unsigned broke humidity
calculation.
* hid-sensor
- Restore the poll and hysteresis values after resume as some hardware
doesn't do it.
* stm32-trigger
- buglet in reading the sampling frequency
AS3935_WRITE_DATA macro bit is incorrect and the actual write
sequence is two leading zeros.
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};
@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;
File size before:
text data bss dec hex filename
4037 288 0 4325 10e5 drivers/iio/proximity/as3935.o
File size after:
text data bss dec hex filename
4101 256 0 4357 1105 drivers/iio/proximity/as3935.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Initialize the parent of the IIO device to the device that registered it.
This makes sure that the IIO device appears the right level in the device
hierarchy.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds support for the ultrasonic ranger srf04 of devantech.
This device is measuring the distance of objects in a range between 1 cm
and 3 meters and a theoretical resolution of 3 mm.
There are two GPIOs used:
- trigger: set as output to the device when the measurement should start
- echo: set by the device when the ultrasonic wave is sent out and reset
when the echo is recognized; this needs to be an interrupt input
The time between setting and resetting the echo pin is the time the
waveform needed for one round trip. This time is recorded in the interrupt
handler.
The distance is calculated in the read function by using the ultrasonic
speed at 20 degrees celsius which is about 343 m/s.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.
The sensor supports I2C with some registers.
Supported Features include:
- read the distance in ranging mode in centimeters
- output of the driver is directly the read value
- together with the scale the driver delivers the distance in meters
- only the first echo of the nearest object is delivered
- set sensitivity as analog value in the range of 0-31 means setting
gain register on device
- set range registers; userspace enters max. range in millimeters in
43 mm steps
Features not supported by this driver:
- ranging mode in inches or in microseconds
- ANN mode
- change I2C address through this driver
- light sensor
The driver was added in the directory "proximity" of the iio subsystem and
the menu in den config is now called "Proximity and distance sensors"
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Driver was checking for direct mode but not locking it. Use the
claim/release helper functions to guarantee the device stays in
direct mode during raw reads of proximity data.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Remove pm_runtime_mark_last_busy() call that wasn't need in the probe
since the device should be put to sleep.
Clarification from Matt:
Basically it going to be suspended once pm_runtime_idle() is called,
and setting the last busy is useless and not needed.
Clearly this doesn't affect the device running but just makes the code
more consistent with other uses.
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
New device support
* ad8801 dac
- new driver supporting ad8801 and ad8803 DACs.
* adc12138
- new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
- new driver
* mxc6255
- add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
- add support for the vz89te part which drops the voc_short channel and adds
CRCs compared to other supported parts.
New features
* core
- immutable triggers. These effectively grant exclusive control over a
trigger. The typical usecase is a device representing an analog part
(perhaps a MUX) that needs to control the sampling of a downstream
ADC.
- resource managed trigger registration and triggered_buffer_init.
- iio_push_event now protected against case of the event interface
registration not having yet occured. Only matters if an interrupt
can occur during this window - might happen on shared interrupt lines.
- helper to let a driver query if the trigger it is using is provided by
itself (using the convention of both device and trigger having the same
parent).
* tools
- iio-utils. Used channel modifier scaling in preference to generic scaling
when both exist.
* at91-adc
- Add support for touchscreen switches closure time needed by some newer
parts.
* stx104
- support the ADC channels on this ADC/DAC board. As these are the primary
feature of the board also move the driver to the iio/adc directory.
* sx9500
- device tree bindings.
Cleanups / Fixes
* ad5755
- fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
- drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
- avoid an unused functional warning due to rework in PM core code.
- remove .owner field setting as done by i2c_core.
* ina2xx
- clear out a left over debug field from chip global data.
* hid-sensors
- avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
- fix non static symbol warnings.
* ms5611
- fetch and enable regulators unconditionally when they aren't optional.
* sca3000
- whitespace cleanup.
* st_sensors
- fetch and enable regulators unconditionally rather than having them
supported as optional regulators (missunderstanding on my part amongst
others a while back)
- followup to previous patch fixes error checking on the regulators.
- mark symbols static where possible.
- use the 'is it my trigger' help function. This prevents the odd case
of another device triggering from the st-sensors trigger whilst the
st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
- add missing of_node_put.
* vz89x
- rework to all support of new devices.
- prevent reading of a corrupted buffer.
- fixup a return value of 0/1 in a bool returning function.
Address updates
- Vlad Dogaru email address change.
-----BEGIN PGP SIGNATURE-----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=V1xL
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of iio new device support, features and cleanups for the 4.9 cycle.
New device support
* ad8801 dac
- new driver supporting ad8801 and ad8803 DACs.
* adc12138
- new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
- new driver
* mxc6255
- add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
- add support for the vz89te part which drops the voc_short channel and adds
CRCs compared to other supported parts.
New features
* core
- immutable triggers. These effectively grant exclusive control over a
trigger. The typical usecase is a device representing an analog part
(perhaps a MUX) that needs to control the sampling of a downstream
ADC.
- resource managed trigger registration and triggered_buffer_init.
- iio_push_event now protected against case of the event interface
registration not having yet occured. Only matters if an interrupt
can occur during this window - might happen on shared interrupt lines.
- helper to let a driver query if the trigger it is using is provided by
itself (using the convention of both device and trigger having the same
parent).
* tools
- iio-utils. Used channel modifier scaling in preference to generic scaling
when both exist.
* at91-adc
- Add support for touchscreen switches closure time needed by some newer
parts.
* stx104
- support the ADC channels on this ADC/DAC board. As these are the primary
feature of the board also move the driver to the iio/adc directory.
* sx9500
- device tree bindings.
Cleanups / Fixes
* ad5755
- fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
- drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
- avoid an unused functional warning due to rework in PM core code.
- remove .owner field setting as done by i2c_core.
* ina2xx
- clear out a left over debug field from chip global data.
* hid-sensors
- avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
- fix non static symbol warnings.
* ms5611
- fetch and enable regulators unconditionally when they aren't optional.
* sca3000
- whitespace cleanup.
* st_sensors
- fetch and enable regulators unconditionally rather than having them
supported as optional regulators (missunderstanding on my part amongst
others a while back)
- followup to previous patch fixes error checking on the regulators.
- mark symbols static where possible.
- use the 'is it my trigger' help function. This prevents the odd case
of another device triggering from the st-sensors trigger whilst the
st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
- add missing of_node_put.
* vz89x
- rework to all support of new devices.
- prevent reading of a corrupted buffer.
- fixup a return value of 0/1 in a bool returning function.
Address updates
- Vlad Dogaru email address change.
This makes sx9500 driver usable on devicetree based platforms too.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
The usage pattern of the completion is:
waiter context waker context
sx9500_read_proximity()
sx9500_inc_chan_users()
sx9500_inc_data_rdy_users()
wait_for_completion_interruptible()
s9500_irq_thread_handler()
complete()
reinit_completion()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the iio_pollfunc_store_time parameter during triggered buffer
set-up to get valid timestamps.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
