mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 22:23:05 +00:00
loongarch-next
61 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jean-Baptiste Maneyrol
|
dfdc31e7cc |
iio: imu: inv_icm42600: change invalid data error to -EBUSY
Temperature sensor returns the temperature of the mechanical parts
of the chip. If both accel and gyro are off, the temperature sensor is
also automatically turned off and returns invalid data.
In this case, returning -EBUSY error code is better then -EINVAL and
indicates userspace that it needs to retry reading temperature in
another context.
Fixes:
|
||
|
Jean-Baptiste Maneyrol
|
7586eb9b67 |
iio: imu: inv_icm42600: add wakeup functionality for Wake-on-Motion
When Wake-on-Motion is on, enable system wakeup and keep the chip on for waking up the system with an interrupt. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-3-5bb0c84800d9@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
50cfaa9a46 |
iio: imu: inv_icm42600: add WoM support
Add WoM as accel roc rising x|y|z event. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-2-5bb0c84800d9@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
0c122c280e |
iio: imu: inv_icm42600: reorganize DMA aligned buffers in structure
Move all DMA aligned buffers together at the end of the structure. 1. Timestamp anynomous structure is not used with DMA so it doesn't belong after __aligned(IIO_DMA_MINALIGN). 2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN) within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN) in the outer struct either. 3. Normally 1 would have been considered a bug, but because of the extra alignment from 2, it actually was OK, but we shouldn't be relying on such quirks. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Andy Shevchenko
|
a4135386fa |
iio: imu: inv_icm42600: Convert to uXX and sXX integer types
The driver code is full of intXX_t and uintXX_t types which is not the pattern we use in the IIO subsystem. Switch the driver to use kernel internal types for that. No functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250616090423.575736-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
David Lechner
|
352112e2d9 |
iio: imu: inv_icm42600: use = { } instead of memset()
Use { } instead of memset() to zero-initialize stack memory to simplify
the code.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250611-iio-zero-init-stack-with-instead-of-memset-v1-16-ebb2d0a24302@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
||
|
chuguangqing
|
3be2dd5185 |
iio: imu: icm42600: convert to use maple tree register cache
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250611085838.4761-7-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Greg Kroah-Hartman
|
0ca7cb7089 |
IIO: New device support, features and cleanup for 6.16 - take 2
Note - last minute rebase was to drop a typo patch that I'd accidentally picked up (in the microblaze arch Kconfig) Take 2 is due to that rebase messing up some fixes tags that were referring to patches after that point. There is a known merge conflict due to changes in neighbouring lines. Stephen's resolution in linux-next is: https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/ Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those who have been doing much of this work for some time. Lars-Peter is removed from the entry having moved on to other topics. Thanks Nuno, David and Andy for stepping up and Lars-Peter for all your hard work in the past! Includes the usual mix of new device support, features and general cleanup. This time we also have some tree wide changes. - Rip out the iio_device_claim_direct_scoped() as it proved hard to work with. This series includes quite a few related cleanups such as use of guard or factoring code out to allow direct returns. - Switch from iio_device_claim/release_direct_mode() to new iio_device_claim/release_direct() which is structured so that sparse can warn on failed releases. There were a few false positives but those were mostly in code that benefited from being cleaned up as part of this process. - Introduce iio_push_to_buffers_with_ts() to replace the _timestamp() version over time. This version takes the size of the supplied buffer which the core checks is at least as big as expected by calculation from channel descriptions of those channels enabled. Use this in an initial set of drivers. - Add macros for IIO_DECLARE_BUFFER_WITH_TS() and IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure correctly aligned buffers for timestamps being added onto the end of channel data. New device support ------------------ adi,ad3530r - New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with programmable gain controls. R variants have internal references. adi,ad7476 - Add support (dt compatible only) for the Rohm BU79100G ADC which is fully compatible with the ti,ads7866. adi,ad7606 - Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic channel information allocation. adi,ad7380 - Add support for the AD7389-4 dfrobot,sen0322 - New driver for this oxygen sensor. mediatek,mt2701-auxadc - Add binding for MT6893 which is fully compatible with already supported MT8173. meson-saradc - Support the GXLX SoCs. Mostly this is a workaround for some unrelated clock control bits found in the ADC register map. nuvoton,nct7201 - New driver for NCT7201 and NCT7202 I2C ADCs. rohm,bd79124 - New driver for this 12-bit, 8-channel SAR ADC. - Switch to new set_rv etc gpio callbacks that were added in 6.15. rohm,bd79703 - Add support for BD79700, BD79701 and BD79702 DACs that have subsets of functionality of the already supported bd79703. Included making this driver suitable for support device variants. st,stm32-lptimer - Add support for stm32pm25 to this trigger. Features -------- Beyond IIO - Property iterator for named children. core - Enable writes for 64 bit integers used for standard IIO ABI elements. Previously these could be read only. - Helper library that should avoid code duplication for simpler ADC bindings that have a child node per channel. - Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true and simplifies code on all significant architectures) core/backend - Add support to control source of data - useful when the HDL includes things like generated ramps for testing purposes. Enable this for adi-axi-dac adi,ad3552-hs - Add debugfs related callbacks to allow debug access to register contents. adi,ad4000 - Support SPI offload with appropriate FPGA firmware along with improving documentation. adi,ad7293 - Add support for external reference voltage. adi,ad7606 - Support SPI offload. adi,ad7768-1 - Support reset GPIO. adi,admv8818 - Support filter frequencies beyond 2^32. adi,adxl345 - Add single and double tap events. hid-sensor-prox - Support 16-bit report sizes as seen on some Intel platforms. invensense,icm42600 - Enable use of named interrupts to avoid problems with some wiring choices. Get the interrupt by name, but fallback to previous assumption on the first being INT1 if no names are supplied. microchip,mcp3911 - Add reset gpio support. rohm,bh7150 - Add reset gpio support. st,stm32 - Add support to control oversampling. ti,adc128s052 - Add support for ROHM BD79104 which is early compatible with the TI parts already supported by this driver. Includes some general driver cleanup and a separate dt binding. - Simplify reference voltage handling by assuming it is fixed after enabling the supply. winsen,mhz19b - New driver for this C02 sensor. Cleanup and minor fixes ----------------------- dt-bindings - Correct indentation and style for DTS examples. - Use unevalutateProperties for SPI devices instead of additionalProperties to allow generic SPI properties from spi-peripheral-props.yaml ABI Docs - Add missing docs for sampling_frequency when it applies only to events. Treewide - Various minor tweaks, comment fixes and similar. - Sort TI ADCs in Kconfig that had gotten out of order. - Switch various drives that provide GPIO chip functionality to the new callbacks with return values. - Standardize on { } formatting for all array sentinels. - Make use of aligned_s64 in a few places to replace either wrong types or manually defined equivalents. - Drop places where spi bits_per_word is set to 8 because that is the default anyway. adi,ad_sigma_delta library - Avoid a potential use of uninitialized data if reg_size has a value that is not supported (no drivers hit this but it is reasonable hardening) adi,ad4030 - Add error checking for scan types and no longer store it in state. - Rework code to reduce duplication. - Move setting the mode from buffer preenable() to update_scan_mode(), better matching expected semantics of the two different callbacks. - Improve data marshalling comments. adi,ad4695 - Use u16 for buffer elements as oversampling is not yet supported except with SPI offload (which doesn't use this path). adi,ad5592r - Clean up destruction of mutexes. - Use lock guards to simplify code (later patch fixes a missed unlock) adi,ad5933 - Correct some incorrect settling times. adi,ad7091 - Deduplicate handling of writable vs volatile registers as they are the inverse of each other for this device. adi,ad7124 - Fix 3db Filter frequency. - Remove ability to directly write the filter frequency (which was broken) - Register naming improvements. adi,ad7606 - Add a missing return value check. - Fill in max sampling rates for all chips. - Use devm_mutex_init() - Fix up some kernel-doc formatting issues. - Remove some camel case that snuck in. - Drop setting address field in channels as easily established from other fields. - Drop unnecessary parameter to ad76060_scale_setup_cb_t. adi,ad7768-1 - Convert to regmap. - Factor out buffer allocation. - Tidy up headers. adi,ad7944 - Stop setting bits_per_word in SPI xfers with no data. adi,ad9832 - Add of_device_id table rather than just relying on fallbacks. - Use FIELD_PREP() to set values of fields. adi,admv1013 - Cleanup a pointless ternary. adi,admv8818 - Fix up LPF Band 5 frequency which was slightly wrong. - Fix an integer overflow. - Fix range calculation adi,adt7316 - Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler irq_get_trigger_type() adi,adxl345 - Use regmap cache instead of various state variables that were there to reduce bus accesses. - Make regmap return value checking consistent across all call sites. adi,axi-dac - Add a check on number of channels (0 to 15 valid) allwinner,sun20i - Use new adc-helpers to replace local parsing code for channel nodes. bosch,bmp290 - Move to local variables for sensor data marshalling removing the need for a messy definition that has to work for all supported parts. Follow up fix adds a missing initialization. dynaimage,al3010 and dynaimage,al3320a - Various minor cleanup to bring these drivers inline with reviewed feedback given on a new driver. - Fix an error path in which power down is not called when it should be. - Switch to regmap. google,cros_ec - Fix up a flexible array in middle of structure warning. - Flush fifo when changing the timeout to avoid potential long wait for samples. hid-sensor-rotation - Remove an __aligned(16) marking that doesn't seem to be justified. kionix,kxcjk-1013 - Deduplicate code for setting up interrupts. microchip,mcp3911 - Fix handling of conversion results register which differs across supported devices. idt,zopt2201 - Avoid duplicating register lists as all volatile registers are the inverse of writeable registers on this device. renesas,rzg2l - Use new adc-helpers to replace local parsing code for channel nodes. ti,ads1298 - Fix a missing Kconfig dependency. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmgt1EgRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foii3g//bZJT2/rHGIkU/MKUsYQCZGh5ux7X59Kk DT8R7i8RYg2dshbtkkHUn/S6yC3OX84q3Legzy8TtHkPvGMK1NSwWCrn2cqkCZdG 4kksfq3P41FmRrpSfm4p+WSAD9nYzA/LToSLdwGIOa44lKxlCElBgsIDz/HxwXLB N08H5jniST+cmSWAkkxCj15jcKXGtuIUS3XSCffwlzQZNPHp7guk4u+5EiUaPwvy X75iZ6SthUo9GfE6QyhE4rdOceix6S5wsQrKVpGKB7ZuQbXYQxlvNVt/l5p6MGdY teoqB7CyUADD1yHZp9L85+JSqjbodxm5a/Y9b0wQKHV33dxphEVZeli9t+VZYg6K fSM5xq0Cmt0msXLGRgB1uvZcEfj+vlkn7SN9nyyfTN2nXoac1E/MYCEiCLMhOj6D jxwc1aQDwaT+f6U6mRyRab2+TPea7AOv81x0MyRclOArqY4NCOPIG+XvC2nouYXk 9MSyK4FIysbINjenFCZdpdibp3HKWGqc8rTv3NWrx7CejAYQoEkYW5WA9qyzy/I8 8gDbcQskcYcehrI8ztc1ratfKl5k0QJPCgcLvuTpxK3PkQCgX+dGnL1EXW7D4BRx 7Gl6O7gW7JR6kVx7LidJAxUSykoCdtPyiDxfEU8ypERiype2E6EJN/Bn11o1P8zr VZ/PdGti5gg= =vLKV -----END PGP SIGNATURE----- Merge tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: New device support, features and cleanup for 6.16 - take 2 Note - last minute rebase was to drop a typo patch that I'd accidentally picked up (in the microblaze arch Kconfig) Take 2 is due to that rebase messing up some fixes tags that were referring to patches after that point. There is a known merge conflict due to changes in neighbouring lines. Stephen's resolution in linux-next is: https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/ Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those who have been doing much of this work for some time. Lars-Peter is removed from the entry having moved on to other topics. Thanks Nuno, David and Andy for stepping up and Lars-Peter for all your hard work in the past! Includes the usual mix of new device support, features and general cleanup. This time we also have some tree wide changes. - Rip out the iio_device_claim_direct_scoped() as it proved hard to work with. This series includes quite a few related cleanups such as use of guard or factoring code out to allow direct returns. - Switch from iio_device_claim/release_direct_mode() to new iio_device_claim/release_direct() which is structured so that sparse can warn on failed releases. There were a few false positives but those were mostly in code that benefited from being cleaned up as part of this process. - Introduce iio_push_to_buffers_with_ts() to replace the _timestamp() version over time. This version takes the size of the supplied buffer which the core checks is at least as big as expected by calculation from channel descriptions of those channels enabled. Use this in an initial set of drivers. - Add macros for IIO_DECLARE_BUFFER_WITH_TS() and IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure correctly aligned buffers for timestamps being added onto the end of channel data. New device support ------------------ adi,ad3530r - New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with programmable gain controls. R variants have internal references. adi,ad7476 - Add support (dt compatible only) for the Rohm BU79100G ADC which is fully compatible with the ti,ads7866. adi,ad7606 - Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic channel information allocation. adi,ad7380 - Add support for the AD7389-4 dfrobot,sen0322 - New driver for this oxygen sensor. mediatek,mt2701-auxadc - Add binding for MT6893 which is fully compatible with already supported MT8173. meson-saradc - Support the GXLX SoCs. Mostly this is a workaround for some unrelated clock control bits found in the ADC register map. nuvoton,nct7201 - New driver for NCT7201 and NCT7202 I2C ADCs. rohm,bd79124 - New driver for this 12-bit, 8-channel SAR ADC. - Switch to new set_rv etc gpio callbacks that were added in 6.15. rohm,bd79703 - Add support for BD79700, BD79701 and BD79702 DACs that have subsets of functionality of the already supported bd79703. Included making this driver suitable for support device variants. st,stm32-lptimer - Add support for stm32pm25 to this trigger. Features -------- Beyond IIO - Property iterator for named children. core - Enable writes for 64 bit integers used for standard IIO ABI elements. Previously these could be read only. - Helper library that should avoid code duplication for simpler ADC bindings that have a child node per channel. - Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true and simplifies code on all significant architectures) core/backend - Add support to control source of data - useful when the HDL includes things like generated ramps for testing purposes. Enable this for adi-axi-dac adi,ad3552-hs - Add debugfs related callbacks to allow debug access to register contents. adi,ad4000 - Support SPI offload with appropriate FPGA firmware along with improving documentation. adi,ad7293 - Add support for external reference voltage. adi,ad7606 - Support SPI offload. adi,ad7768-1 - Support reset GPIO. adi,admv8818 - Support filter frequencies beyond 2^32. adi,adxl345 - Add single and double tap events. hid-sensor-prox - Support 16-bit report sizes as seen on some Intel platforms. invensense,icm42600 - Enable use of named interrupts to avoid problems with some wiring choices. Get the interrupt by name, but fallback to previous assumption on the first being INT1 if no names are supplied. microchip,mcp3911 - Add reset gpio support. rohm,bh7150 - Add reset gpio support. st,stm32 - Add support to control oversampling. ti,adc128s052 - Add support for ROHM BD79104 which is early compatible with the TI parts already supported by this driver. Includes some general driver cleanup and a separate dt binding. - Simplify reference voltage handling by assuming it is fixed after enabling the supply. winsen,mhz19b - New driver for this C02 sensor. Cleanup and minor fixes ----------------------- dt-bindings - Correct indentation and style for DTS examples. - Use unevalutateProperties for SPI devices instead of additionalProperties to allow generic SPI properties from spi-peripheral-props.yaml ABI Docs - Add missing docs for sampling_frequency when it applies only to events. Treewide - Various minor tweaks, comment fixes and similar. - Sort TI ADCs in Kconfig that had gotten out of order. - Switch various drives that provide GPIO chip functionality to the new callbacks with return values. - Standardize on { } formatting for all array sentinels. - Make use of aligned_s64 in a few places to replace either wrong types or manually defined equivalents. - Drop places where spi bits_per_word is set to 8 because that is the default anyway. adi,ad_sigma_delta library - Avoid a potential use of uninitialized data if reg_size has a value that is not supported (no drivers hit this but it is reasonable hardening) adi,ad4030 - Add error checking for scan types and no longer store it in state. - Rework code to reduce duplication. - Move setting the mode from buffer preenable() to update_scan_mode(), better matching expected semantics of the two different callbacks. - Improve data marshalling comments. adi,ad4695 - Use u16 for buffer elements as oversampling is not yet supported except with SPI offload (which doesn't use this path). adi,ad5592r - Clean up destruction of mutexes. - Use lock guards to simplify code (later patch fixes a missed unlock) adi,ad5933 - Correct some incorrect settling times. adi,ad7091 - Deduplicate handling of writable vs volatile registers as they are the inverse of each other for this device. adi,ad7124 - Fix 3db Filter frequency. - Remove ability to directly write the filter frequency (which was broken) - Register naming improvements. adi,ad7606 - Add a missing return value check. - Fill in max sampling rates for all chips. - Use devm_mutex_init() - Fix up some kernel-doc formatting issues. - Remove some camel case that snuck in. - Drop setting address field in channels as easily established from other fields. - Drop unnecessary parameter to ad76060_scale_setup_cb_t. adi,ad7768-1 - Convert to regmap. - Factor out buffer allocation. - Tidy up headers. adi,ad7944 - Stop setting bits_per_word in SPI xfers with no data. adi,ad9832 - Add of_device_id table rather than just relying on fallbacks. - Use FIELD_PREP() to set values of fields. adi,admv1013 - Cleanup a pointless ternary. adi,admv8818 - Fix up LPF Band 5 frequency which was slightly wrong. - Fix an integer overflow. - Fix range calculation adi,adt7316 - Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler irq_get_trigger_type() adi,adxl345 - Use regmap cache instead of various state variables that were there to reduce bus accesses. - Make regmap return value checking consistent across all call sites. adi,axi-dac - Add a check on number of channels (0 to 15 valid) allwinner,sun20i - Use new adc-helpers to replace local parsing code for channel nodes. bosch,bmp290 - Move to local variables for sensor data marshalling removing the need for a messy definition that has to work for all supported parts. Follow up fix adds a missing initialization. dynaimage,al3010 and dynaimage,al3320a - Various minor cleanup to bring these drivers inline with reviewed feedback given on a new driver. - Fix an error path in which power down is not called when it should be. - Switch to regmap. google,cros_ec - Fix up a flexible array in middle of structure warning. - Flush fifo when changing the timeout to avoid potential long wait for samples. hid-sensor-rotation - Remove an __aligned(16) marking that doesn't seem to be justified. kionix,kxcjk-1013 - Deduplicate code for setting up interrupts. microchip,mcp3911 - Fix handling of conversion results register which differs across supported devices. idt,zopt2201 - Avoid duplicating register lists as all volatile registers are the inverse of writeable registers on this device. renesas,rzg2l - Use new adc-helpers to replace local parsing code for channel nodes. ti,ads1298 - Fix a missing Kconfig dependency. * tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits) dt-bindings: iio: adc: Add ROHM BD79100G iio: adc: add support for Nuvoton NCT7201 dt-bindings: iio: adc: add NCT7201 ADCs iio: chemical: Add driver for SEN0322 dt-bindings: trivial-devices: Document SEN0322 iio: adc: ad7768-1: reorganize driver headers iio: bmp280: zero-init buffer iio: ssp_sensors: optimalize -> optimize HID: sensor-hub: Fix typo and improve documentation iio: admv1013: replace redundant ternary operator with just len iio: chemical: mhz19b: Fix error code in probe() iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros iio: make IIO_DMA_MINALIGN minimum of 8 bytes iio: pressure: zpa2326_spi: remove bits_per_word = 8 iio: pressure: ms5611_spi: remove bits_per_word = 8 ... |
||
|
Sean Nyekjaer
|
e2f8200142 |
iio: imu: inv_icm42600: Fix temperature calculation
>From the documentation:
"offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale"
Offset should be applied before multiplying scale, so divide offset by
scale to make this correct.
Fixes:
|
||
|
David Lechner
|
70788d26ae |
iio: normalize array sentinel style
Use `\t(\{ ?\},|\{\}|\{\s*/\*.*\*/\s*\},?)$` regex to find and replace
the array sentinel in all IIO drivers to the same style.
For some time, we've been trying to consistently use `{ }` (no trailing
comma, no comment, one space between braces) for array sentinels in the
IIO subsystem. Still nearly 50% of existing code uses a different style.
To save reviewers from having to request this trivial change as
frequently, let's normalize the style in all existing IIO drivers.
At least when code is copy/pasted to new drivers, the style will be
consistent.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250411-iio-sentinel-normalization-v1-1-d293de3e3d93@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
||
|
Jean-Baptiste Maneyrol
|
b1ba43263e |
iio: imu: inv_icm42600: switch to use generic name irq get
Use generic fwnode_irq_get_byname() for getting interrupt pin using interrupt name. Only INT1 is supported by the driver currently. If not found fallback to first defined interrupt to keep compatibility. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250410-iio-imu-inv-icm42600-rework-interrupt-using-names-v4-2-19e4e2f8f7eb@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jonathan Cameron
|
cbff19a382 |
iio: imu: inv_icm42600: Switch to sparse friendly iio_device_claim/release_direct()
These new functions allow sparse to find failures to release direct mode reducing chances of bugs over the claim_direct_mode() functions that are deprecated. Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://patch.msgid.link/20250331121317.1694135-16-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Greg Kroah-Hartman
|
be887fcad3 |
Merge 6.13-rc4 into char-misc-next
We need the IIO fixes in here as well, and it resolves a merge conflict in: drivers/iio/adc/ti-ads1119.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jonathan Cameron
|
27e6ddf291 |
iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
The vast majority of IIO drivers use aligned_s64 for the type of the timestamp field. It is not a bug to use int64_t and until this series iio_push_to_buffers_with_timestamp() took and int64_t timestamp, it is inconsistent. This change is to remove that inconsistency and ensure there is one obvious choice for future drivers. Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20241215182912.481706-19-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
65a60a5901 |
iio: imu: inv_icm42600: fix timestamps after suspend if sensor is on
Currently suspending while sensors are one will result in timestamping
continuing without gap at resume. It can work with monotonic clock but
not with other clocks. Fix that by resetting timestamping.
Fixes:
|
||
|
Jean-Baptiste Maneyrol
|
c0f866de4c |
iio: imu: inv_icm42600: fix spi burst write not supported
Burst write with SPI is not working for all icm42600 chips. It was
only used for setting user offsets with regmap_bulk_write.
Add specific SPI regmap config for using only single write with SPI.
Fixes:
|
||
|
Peter Zijlstra
|
cdd30ebb1b |
module: Convert symbol namespace to string literal
Clean up the existing export namespace code along the same lines of
commit
|
||
|
Greg Kroah-Hartman
|
389c4245f5 |
IIO: 3rd set of fixes for the 6.12 cycle
Usual mixed bag of new issues from this cycle and ancient bugs recently noticed. core - Fix wrong fwnode handle if __fwnode_iio_channel_get_by_name() looks at parents of the provider node. core,backend - Fix a wrong pointer error check. gts library - Fix plausible corner case where the value returned was not set. - Avoid near infinite loop if the size of the table is 0. (neither are an issue for current drivers). adi,ad4000 - Fix reading of unsigned channels that were returning garbage. adi,ad7780 - Prevent a division by zero. adi,ad7923 - Fix buffer overflows in arrays that were not resized when devices with more channels were added to the driver. adi,adxl380 - Check only for negative error codes rather than including the positive channel read values in an error check. invense,common - Fix an issue where changing the sampling rate to another value and back again whilst the FIFO was off would not update things correctly. kionix,kx022a - Fix failure to sign extend value read from device. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmctBygRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Fog9gQ/8CdpYJWoK2qnXiWkNQdLR4vqd3RKnQ8ch 046D26kNoQNDEdT/lSKKvZdGaZmcMg2SqK3VpCJCPc08uuqIZoRbMcv6WkhdP5iK besdoaqkyEQaCnR+o0annbDq+hADN0uwe398WbIKMmKxU6nUPTwLkJTTroCnP8pn juAi4Elvhz93LhgVPuDtzuMxFAI4gRz8LPfv1WdIIyMitwO8j7ILjjab3Jy+1Rfr 8n8HwZolS74iSY9qLc7kaipCRb4He+Q6/+c011ym9g8E8ge8KO1huxOn0FnIsWXv g/qLsmnEMy56ypguf0uStNHN9f7AXHlqC1xiScnkZXsbP4CFakaL3M8hBbOiw13S u/ylhYkxSqCsjZ/oNlTaDtnZrL/ZaHlSTBcsqEu3JRHkG9bJCgLQl2IfTS5Px65Y JEj5OGu9nEDi5lPGOUqgJgmLuxSNEMtHqqvqTAp0kk4McM/BocW0ldEaZy7cokCb Tb/auEK4sGssdhJM8Nq+wH6mHfjn0IL38sBHNyP640kFNRMG1WnVDICzFGsC3ldL TLsczCulnVdr8xhK5vl2irqjnVKzjSFgXZg5jB/29N0V4re/b6pOh8LWm3Ze5hQZ sR0rkXI7FkDaNk7Ifb/Pe2XCbU2IjgAvf3dyZxO/E1UuLAz+spa0WjImghHCT5P8 e9WcX1hoKbg= =4pCM -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-6.12c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 3rd set of fixes for the 6.12 cycle Usual mixed bag of new issues from this cycle and ancient bugs recently noticed. core - Fix wrong fwnode handle if __fwnode_iio_channel_get_by_name() looks at parents of the provider node. core,backend - Fix a wrong pointer error check. gts library - Fix plausible corner case where the value returned was not set. - Avoid near infinite loop if the size of the table is 0. (neither are an issue for current drivers). adi,ad4000 - Fix reading of unsigned channels that were returning garbage. adi,ad7780 - Prevent a division by zero. adi,ad7923 - Fix buffer overflows in arrays that were not resized when devices with more channels were added to the driver. adi,adxl380 - Check only for negative error codes rather than including the positive channel read values in an error check. invense,common - Fix an issue where changing the sampling rate to another value and back again whilst the FIFO was off would not update things correctly. kionix,kx022a - Fix failure to sign extend value read from device. * tag 'iio-fixes-for-6.12c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() iio: accel: adxl380: fix raw sample read iio: accel: kx022a: Fix raw read format iio: gts: fix infinite loop for gain_to_scaletables() iio: gts: Fix uninitialized symbol 'ret' iio: adc: ad4000: fix reading unsigned data ad7780: fix division by zero in ad7780_write_raw() iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer iio: backend: fix wrong pointer passed to IS_ERR() iio: invensense: fix multiple odr switch when FIFO is off |
||
|
Jean-Baptiste Maneyrol
|
ef5f5e7b6f |
iio: invensense: fix multiple odr switch when FIFO is off
When multiple ODR switch happens during FIFO off, the change could
not be taken into account if you get back to previous FIFO on value.
For example, if you run sensor buffer at 50Hz, stop, change to
200Hz, then back to 50Hz and restart buffer, data will be timestamped
at 200Hz. This due to testing against mult and not new_mult.
To prevent this, let's just run apply_odr automatically when FIFO is
off. It will also simplify driver code.
Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.
Fixes:
|
||
|
Jonathan Cameron
|
95bce3fcdb |
iio: imu: inv_icm42600: use irq_get_trigger_type()
Use irq_get_trigger_type() to replace getting the irq data then the type in two steps. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240901135950.797396-11-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jason Liu
|
c6ea08cdaa |
iio: imu: inv_icm42600: add inv_icm42600 id_table
Add the id_table of inv_icm42600, so the device can probe correctly. Signed-off-by: Jason Liu <jasonliu10041728@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20240902113101.3135-1-jasonliu10041728@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Trevor Gamblin
|
0e59dc9e6b |
iio: imu: inv_icm42600: make use of regmap_clear_bits(), regmap_set_bits()
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20240617-review-v3-27-88d1338c4cca@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Greg Kroah-Hartman
|
2046047295 |
Linux 6.10-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZvTbAeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVksIAJEn4a9IVM8FNCJy Dxo0BItD1/qJ5mLDptqUFRKlxInjbojofz5CyoeIeXb0DwRfB16ALXqNXAkd3APi saoOpfjFsg2H2OqL9CHdkzWcJEAq2lDnL0zaOjumeDVu/EyeT+tC4e4hq1e6Bm0E fPC5ms2b+07DF9Rg6/DW8yPbdM5n6Mz1bRd3fQOIgvpM3yGOyGztEBgTRub/ZUgH 5pNJauknFAZgdiWhgNpc+lPWYZbgHKULQPhUBPdVhDIXPtQNUlKgNTQc6+L0Nmbb K1sG1q7FLeMJOTFGQfD4r26X5DNQUi894q/9SX8X7rcrECdJKcw2WjVyB4myADpf ae2gP+A= =XjWP -----END PGP SIGNATURE----- Merge tag 'v6.10-rc4' into char-misc-next We need the char-misc and iio fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jean-Baptiste Maneyrol
|
07d4d0bb4a |
iio: imu: inv_icm42600: add support of accel low-power mode
Add ODRs accessible only in low-power mode. Switch automatically to low-power or low-noise depending on the ODR set. Add channel attributes "power_mode" and "power_mode_available" for setting the power mode to use (low-noise or low-power) for ODRs supporting both mode. Reading "power_mode" when the sensor is on will return the actual mode and not the requested one. It will be different when using ODRs not supported by the requested mode. Use low-power mode by default. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240605195949.766677-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
50cfe81b71 |
iio: imu: inv_icm42600: add register caching in the regmap
Register caching is improving bus access a lot because of the register window bank setting. Previously, bank register was set for every register access. Now with caching, it happens only when changing bank which is very infrequent. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240607081039.789079-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
245f3b149e |
iio: imu: inv_icm42600: delete unneeded update watermark call
Update watermark will be done inside the hwfifo_set_watermark callback
just after the update_scan_mode. It is useless to do it here.
Fixes:
|
||
|
Jean-Baptiste Maneyrol
|
d7bd473632 |
iio: imu: inv_icm42600: stabilized timestamp in interrupt
Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And compute and use the
effective watermark value that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes:
|
||
|
Jean-Baptiste Maneyrol
|
bf8367b00c |
iio: invensense: fix timestamp glitches when switching frequency
When a sensor is running and there is a FIFO frequency change due to
another sensor turned on/off, there are glitches on timestamp. Fix that
by using only interrupt timestamp when there is the corresponding sensor
data in the FIFO.
Delete FIFO period handling and simplify internal functions.
Update integration inside inv_mpu6050 and inv_icm42600 drivers.
Fixes:
|
||
|
Jean-Baptiste Maneyrol
|
a1432b5b4f |
iio: imu: inv_icm42600: add support of ICM-42686-P
Add ICM-42686-P chip supporting high FSRs (32G, 4000dps). Create accel and gyro iio device states with dynamic scales table set at device init. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240422152240.85974-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
88b49449f2 |
iio: imu: inv_icm42600: add support of ICM-42688-P
Add ICM-42688-P support inside driver. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240408090720.847107-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Bragatheswaran Manickavel
|
c788b9e56a |
iio/imu: inv_icm42600: Use max() helper macros
Use the standard max() helper macros instead of direct variable comparison using if/else blocks or ternary operator. Change identified using minmax.cocci Coccinelle semantic patch. Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20231027094410.3706-1-bragathemanick0908@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
0ecc363cce |
iio: make invensense timestamp module generic
Rename common module to inv_sensors_timestamp, add configuration at init (chip internal clock, acceptable jitter, ...) and update inv_icm42600 driver integration. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-4-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
d99ff463ec |
iio: move inv_icm42600 timestamp module in common
Create new inv_sensors common modules and move inv_icm42600 timestamp module inside. This module will be used by IMUs and also in the future by other chips. Modify inv_icm42600 driver to use timestamp module and do some headers cleanup. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jean-Baptiste Maneyrol
|
6e9f2d8375 |
iio: imu: inv_icm42600: make timestamp module chip independent
Move icm42600 dependent function inside the core module. Do some headers cleanup at the same time. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-2-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Greg Kroah-Hartman
|
269b9d8faf |
1st set of IIO new device support, features and cleanup for the 6.5 cycle.
New device support
- honeywell,mprls0025pa
* New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
* Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
* Add support for mlx90615 Infra Red Thermometer after driver cleanup
and refactoring to support the differences in this device.
- renesas,x9250
* New driver and bindings for this quad potentiometer.
- rockchip,saradc
* Add support for RK3588. Also included is a bunch of refactoring and
cleanup for that driver.
- rohm,bu27008
* New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
* ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
* New driver and bindings for this ambient light sensor.
Features
- core
* Introduce iio_validate_own_trigger() for cases where a driver can only
consumer a trigger it registered (detected via same parent device).
Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
* ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
* Enable asynchronous probe.
- rohm,bu27034
* Enable asynchronous probe.
- ti,tmp006
* Explicit support for DT including binding documentation.
Cleanups, minor fixes and misc improvements.
- treewide
* Switch I2C drivers from probe_new() back to probe() - part of the
long process of getting rid of a parameter from probe()
* Various whitespace and typo fixes not otherwise called out.
- core
* industrialio-buffer,Style cleanup.
* Add documentation to extend_name field of struct iio_chan_spec to
direct people using it towards the label infrastructure instead.
extend_name was a design mistake a long time back so directly people
away from it may be useful.
- adi,ad7606
* Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
* Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
* Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
* Add DT binding for this part.
- qcom,spmi-vadc
* Allow for 1/16th prescaling used on a few devices.
* Various changes to channel labeling and naming, including dropping
use of fwnode_name which generates odd channel names. Small ABI
change as a result, but not thought to be a problem for users of this
platform.
- st,lsm6dsx
* dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
* Add a debug print for when legacy channel config is used.
- ti,palmas-adc
* Drop unused i2c.h include.
-----BEGIN PGP SIGNATURE-----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=0gJ9
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for the 6.5 cycle.
New device support
- honeywell,mprls0025pa
* New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
* Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
* Add support for mlx90615 Infra Red Thermometer after driver cleanup
and refactoring to support the differences in this device.
- renesas,x9250
* New driver and bindings for this quad potentiometer.
- rockchip,saradc
* Add support for RK3588. Also included is a bunch of refactoring and
cleanup for that driver.
- rohm,bu27008
* New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
* ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
* New driver and bindings for this ambient light sensor.
Features
- core
* Introduce iio_validate_own_trigger() for cases where a driver can only
consumer a trigger it registered (detected via same parent device).
Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
* ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
* Enable asynchronous probe.
- rohm,bu27034
* Enable asynchronous probe.
- ti,tmp006
* Explicit support for DT including binding documentation.
Cleanups, minor fixes and misc improvements.
- treewide
* Switch I2C drivers from probe_new() back to probe() - part of the
long process of getting rid of a parameter from probe()
* Various whitespace and typo fixes not otherwise called out.
- core
* industrialio-buffer,Style cleanup.
* Add documentation to extend_name field of struct iio_chan_spec to
direct people using it towards the label infrastructure instead.
extend_name was a design mistake a long time back so directly people
away from it may be useful.
- adi,ad7606
* Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
* Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
* Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
* Add DT binding for this part.
- qcom,spmi-vadc
* Allow for 1/16th prescaling used on a few devices.
* Various changes to channel labeling and naming, including dropping
use of fwnode_name which generates odd channel names. Small ABI
change as a result, but not thought to be a problem for users of this
platform.
- st,lsm6dsx
* dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
* Add a debug print for when legacy channel config is used.
- ti,palmas-adc
* Drop unused i2c.h include.
* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
iio: adc: rockchip_saradc: Use dev_err_probe
iio: adc: rockchip_saradc: Match alignment with open parenthesis
iio: adc: rockchip_saradc: Use of_device_get_match_data
iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
iio: adc: rockchip_saradc: Add support for RK3588
iio: adc: rockchip_saradc: Add callback functions
iio: temperature: tmp006: Add OF device matching support
dt-bindings: iio: temperature: Add support for tmp006
staging: iio: Switch i2c drivers back to use .probe()
iio: amplifiers: ad8366 Fix whitespace issue
iio: imu: inv_icm42600: avoid frequent timestamp jitter
MAINTAINERS: Add ROHM BU27008
iio: light: ROHM BU27008 color sensor
iio: kx022a: Use new iio_validate_own_trigger()
iio: trigger: Add simple trigger_validation helper
dt-bindings: iio: light: ROHM BU27008
iio: mlx90614: Add MLX90615 support
...
|
||
|
Jean-Baptiste Maneyrol
|
f3ae82534a |
iio: imu: inv_icm42600: avoid frequent timestamp jitter
We are currently synchronizing every time the data timestamp with the IT timestamp, leading to system jitter jamming timestamps. To fix that and keep it simple, let's just synchronize when the delta is bigger than the acceptable jitter, and keep synchronization at the jitter value. The result is much stable timestamps reflecting better the real physical value. Example @50Hz delta timestamp, * before: 20.123ms, 19.721ms, 20.023ms, 20.353ms, 19.821ms, ... * after: 20.173ms, 20.173ms, 20.173ms, 20.40ms, 20.173ms, ... Refactorize code and delete the unnecessary handling of multiple FIFO data. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20230522093210.817212-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Uwe Kleine-König
|
7cf15f4275 |
iio: Switch i2c drivers back to use .probe()
After commit |
||
|
Jean-Baptiste Maneyrol
|
bbaae0c79e |
iio: imu: inv_icm42600: fix timestamp reset
Timestamp reset is not done in the correct place. It must be done
before enabling buffer. The reason is that interrupt timestamping
is always happening when the chip is on, even if the
corresponding sensor is off. When the sensor restarts, timestamp
is wrong if you don't do a reset first.
Fixes:
|
||
|
Jay Greco
|
c896b9f092 |
iio: imu: inv_icm42600: Add support for icm42631
Add the required WHOAMI and device_id definitions to support the icm42631. Signed-off-by: Jay Greco <grecojay@amazon.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20221110192933.13616-2-grecojay@amazon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jonathan Cameron
|
ef5a5ef29c |
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
As these exports are only relevant to core module and users in the bus specific modules, move them out of the main kernel namespace. Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> -- EXPORT_NS_GPL_DEV_PM_OPS() v2: Switch to Paul's more flexible version of the Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20220925155719.3316280-5-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Greg Kroah-Hartman
|
2a3c8f8a44 |
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
-----BEGIN PGP SIGNATURE-----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=IcsE
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
iio: adc: xilinx-xadc: Make use of device properties
iio: light: cm32181: Add PM support
iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: stm32-adc: disable adc before calibration
iio: adc: stm32-adc: make safe adc disable
iio: dac: ad5380: align '*' each line and drop unneeded blank line
iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
iio: Don't use bare "unsigned"
dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
iio: dac: mcp4922: add support to mcp4921
iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
iio: adc: stm32-adc: Use generic_handle_domain_irq()
proximity: vl53l0x: Make VDD regulator actually optional
MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
iio: gyro: bmg160: Fix typo in comment
...
|
||
|
Greg Kroah-Hartman
|
315f7e15c2 |
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
-----BEGIN PGP SIGNATURE-----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=AtPS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
|
||
|
Jean-Baptiste Maneyrol
|
106b391e1b |
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
The 0 value used for INV_CHIP_ICM42600 was not working since the
match in i2c/spi was checking against NULL value.
To keep this check, add a first INV_CHIP_INVALID 0 value as safe
guard.
Fixes:
|
||
|
Jonathan Cameron
|
b0aa05065a |
iio: imu: inv_icm42600: Fix alignment for DMA safety in buffer code.
Second fix for this driver due to different introducing patches.
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
|
Jonathan Cameron
|
848847702b |
iio: imu: inv_icm42600: Fix alignment for DMA safety
Partial fix for this driver as a second instance was introduced in
a later patch.
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
|
Greg Kroah-Hartman
|
bcfa954650 |
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
-----BEGIN PGP SIGNATURE-----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=wZYX
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO new device support, features and cleanup for 5.19
Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.
Device support
* sprd,sc2720
- upm9620 binding addition.
- Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
- Refactor driver and add support for TLA2024.
Device support (IDs only)
* invensense,mpu6050
- Add ID for ICM-20608-D.
* st,accel:
- Add ID for lis302dl.
* st,lsm6dsx
- Add support for ASM330LHHX (can fallback to LSM6DSR.)
Features
* convert drivers to device properties
- IIO core
- adi,ad7266
- adi,adis16480
- adi,adxl355
- bosch,bmi160
- domintech,dmard06
- fsl,fxas21002c
- invensense,mpu3050
- linear,ltc2983
- linear,ltc2632
- maxbotix,mb1232
- maxim,max31856
- maxim,max31865
- multiplexer
- ping
- rescale
- taos,tsl2772
* core
- Add runtime check on whether realbits fit in storagebits for each
channel.
* adi,ad_sigma_delta
- Add sequencer support and relevant update_scan_mode callbacks for
adi,ad7192 and adi,ad7124.
Cleanup and minor fixes
* MAINTAINERS
- Update Lorenzo Bianconi's email address for IIO drivers.
- Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
- Replace strtobool() with kstrtobool().
- Drop false OF dependencies.
* core
- Tidy up and document IIO modes.
- Take iio_buffer_enabled() out of header allowing current_mode to be
moved to the opaque structure.
- As all kfifo buffers use the same mode value, drop that parameter
and set it unconditionally.
- White space fixes and similar.
- Drop use of list iterator variable for
list_for_each_entry_continue_reverse and use list_prepare_entry to
restart.
* sysfs-trigger
- Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
- Drop misleading shift.
* adi,ad2s1210
- Remove redundant local variable assignment.
* adi,adis16480
- Use local device pointer to reduce repetition.
- Improve handling of clocks.
* domintech,dmard09
- White space.
* dummy driver
- Improve error handling.
* fsl,mma8452
- Add missing documentation of name element.
* invensense,mpu3050
- Stop remove() returning non 0.
* kionix,kxsd9
- White space.
* linear,ltc2688
- Use local variable for struct device.
- Combine of_node_put() error handling paths.
* linear,ltc2983
- Avoid use of constants in messages where a define is available.
* microchip,mcp4131
- Fix compatible in dt example.
* pni,rm3100
- Stop directly accessing iio_dev->current_mode just to find out
if the buffer is enabled.
* renesas,rzg2l
- Relax kconfig constraint to include newer devices.
* sprd,sc27xx
- Fix wrong scaling mask.
- Improve the calibration values.
* samsung,ssp
- Replace a 'found' variable in favor of an explicit value that was
found.
* sensortek,stk3xx
- Add proximity-near-level binding and driver support.
* st,st_sensors:
- Drop unused accel_type enum.
- Return early in *_write_raw()
- Drop unnecessary locking in _avail functions.
- Add local lock to protect odr against concurrent updates allowing
mlock to no longer be used outside of the core.
- Use iio_device_claim_direct_mode() rather than racy checking of
the current mode.
* st,stmpe-adc
- Fix checks on wait_for_completion_timeout().
- Allow use of of_device_id for matching.
* st,stm32-dfsdm
- Stop accessing iio_dev->current_mode to find out if the buffer
is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
- Fix checks on wait_for_completion_timeout.
* ti,ads1015
- Add missing ID for ti,ads1115 in binding doc.
- Convert from repeated chip ID look up to selecting static const
data.
- Switch to read_avail() callback.
* ti,ads8688
- Use of_device_id for driver matching.
* ti,palmas-adc
- Drop a warning on minor calibration mismatch leading to slightly
negative values after applying the calibration.
* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
iio: ti-ads8688: use of_device_id for OF matching
iio: stmpe-adc: use of_device_id for OF matching
dt-bindings: iio: Fix incorrect compatible strings in examples
iio: gyro: mpu3050: Make mpu3050_common_remove() return void
iio: dac: ltc2632: Make use of device properties
iio: temperature: max31865: Make use of device properties
iio: proximity: mb1232: Switch to use fwnode_irq_get()
iio: imu: adis16480: Improve getting the optional clocks
iio: imu: adis16480: Use temporary variable for struct device
iio: imu: adis16480: Make use of device properties
staging: iio: ad2s1210: remove redundant assignment to variable negative
iio: adc: sc27xx: add support for PMIC sc2730
iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
iio: adc: sc27xx: refactor some functions for support more PMiCs
iio: adc: sc27xx: structure adjustment and optimization
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
iio: proximity: stk3310: Export near level property for proximity sensor
dt-bindings: iio: light: stk33xx: Add proximity-near-level
...
|
||
|
Fawzi Khaber
|
b5d6ba09b1 |
iio: imu: inv_icm42600: Fix I2C init possible nack
This register write to REG_INTF_CONFIG6 enables a spike filter that
is impacting the line and can prevent the I2C ACK to be seen by the
controller. So we don't test the return value.
Fixes:
|
||
|
Miquel Raynal
|
f67c6c73cb |
iio: core: Simplify the registration of kfifo buffers
Among all the users of the kfifo buffers, no one uses the INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and simplify a little bit the internals - overall the documentation - by eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by default with kfifo buffers, which will basically mimic what all the "non direct" modes do. Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jyoti Bhayana <jbhayana@google.com> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Jonathan Cameron
|
072cc9816c |
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
Cast to a uintptr_t rather than directly to the enum. As per the discussion in below linked media patch. Link: https://lore.kernel.org/linux-media/CAK8P3a2ez6nEw4d+Mqa3XXAz0RFTZHunqqRj6sCt7Y_Eqqs0rw@mail.gmail.com/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211128172445.2616166-8-jic23@kernel.org |
||
|
Andy Shevchenko
|
b892770a2c |
iio: Drop Duplicated "mount-matrix" parameter
All of the users of iio_read_mount_matrix() are using the very same property name. Moreover, the property name is hard coded in the API documentation. Make this clear and avoid duplication now and in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210518112546.44592-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |