The two clocks, driver is getting, are not being disabled/re-enabled
during runtime of the device. Eliminate one variable in state struct,
all error paths and a lot of code from probe() and remove() by using
devm_clk_get_enabled().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250713152411.74917-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use common inline i3c_writel_fifo()/i3c_readl_fifo() methods to
simplify code since the FIFO of controller is a 32bit width.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250624-i3c-writesl-readsl-v3-2-63ccf0870f01@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace non-standard ENOTSUPP with the SUSV4-defined error code
EOPNOTSUPP to fix below checkpatch warning:
"ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP"
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250628192027.3932-8-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
I2C adapters have their own timeout value which can be changed by
userspace if desired. Use it for I2C transfers. The default is 1Hz, so
the default behaviour is unchanged.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250604101831.56585-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The change is necessary to enable the use of the
`i2c_get_dma_safe_msg_buf()` API, which requires a non-const
`struct i2c_msg *` to operate. The `i2c_get_dma_safe_msg_buf()` function
ensures safe handling of I2C messages when using DMA, making it essential
for scenarios where DMA transfers are involved. By removing the `const`
qualifier, this patch allows drivers to prepare and manage DMA-safe
buffers directly.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250204091702.4014466-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmeSwjsACgkQY6TcMGxw
OjJluBAAnw46F+qJM6XA1pPOYCc2uvVj6kmswMl5ZVWGplvY1qCnAq8PBHQTdKIY
O7EV9QejCZZxMaa/ruh9VhyLyLNo8pm6wcCNXwufhDmH1kuAP+7cWjPh1qWsMBg6
TaBD05mN7FC9YPPsAPnx9IJNSdsbrSF6bc8m+7xrweQa9guX3TH+aim/U1K4RSh4
VnpiDKHRKaymoZ5Ldkny112/1/+L64bHnn/f4M5wNC6I9j3S/enmE3zKoi4UbeNR
b73GqxjB8v9Er7Stafs8iHfboNfNKS9RiJDgFHg1+5eThbN9TTU3k2ym/osUCmet
WJysSc88sp/vbr7BszDtTsAQb/p87WUFleU05rc0k+v0qF7GHH1wPrEjW46rfATL
JgXbKEQK3vcoYsfQhnzJC6W5PhNHTP4VOlIiwZAeGjsVSkbVZHRNez1gQa77dYu/
pTpVon6M83Mn6QLkq+LwSuO4ZkBEMna43j9hQ7OmjxKq7Xmf5WJfrd++yjjaMmbu
OUbOOjDYL7D3q5t2QO96zHYXnPfZJ7BBw8J0XgyApNRcyWVXZ9iUKyP9TtI+V1Or
/CUUk1tHnOZ7NcedCes0yIzrTRy0LXShHU6tioRKJCvG/PE06pIipfrJX8gtT7uz
ybNaLDuLoUzIcsOGpBY2SPgirnYLxlnrITTTI7C9TFhCHPnYiSc=
=esI9
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The main change is the addition of PCI bus support for mipi-i3c-hci.
I'm also carrying an hwmon patch as it makes use of the bitops
addition that is then mainly used by i3c drivers.
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Improve initialization of numbered I2C adapters
i3c: master: Fix missing 'ret' assignment in set_speed()
i3c: cdns: use parity8 helper instead of open coding it
i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
i3c: dw: use parity8 helper instead of open coding it
hwmon: (spd5118) Use generic parity calculation
bitops: add generic parity calculation for u8
i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
i3c: fix kdoc parameter description for module_i3c_i2c_driver()
i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
The kernel has now a generic helper for getting parity with easier to
understand semantics. Make use of it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250107090204.6593-6-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the cdns_i3c_master_probe function, &master->hj_work is bound with
cdns_i3c_master_hj. And cdns_i3c_master_interrupt can call
cnds_i3c_master_demux_ibis function to start the work.
If we remove the module which will call cdns_i3c_master_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
CPU0 CPU1
| cdns_i3c_master_hj
cdns_i3c_master_remove |
i3c_master_unregister(&master->base) |
device_unregister(&master->dev) |
device_release |
//free master->base |
| i3c_master_do_daa(&master->base)
| //use master->base
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in cdns_i3c_master_remove.
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Link: https://lore.kernel.org/r/20240911153544.848398-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240826123957.379212-1-liaochen4@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As per the Cadence IP document fixed the I2C clock divider value limit from
16 bits instead of 10 bits. Without this change setting up the I2C clock to
low frequencies will not work as the prescaler value might be greater than
10 bit number.
I3C clock divider value is 10 bits only. Updating the macro names for both.
Signed-off-by: Harshit Shah <harshitshah.opendev@gmail.com>
Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.opendev@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cdns_i3c_xfer.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: "Przemysław Gaj" <pgaj@cadence.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-i3c@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175014.work.637-kees@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230714174623.4057784-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230318233311.265186-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The function returned zero unconditionally. Switch the return type to void
and simplify the callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230318233311.265186-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20200227131307.GA24935@embeddedor
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch adds support for THD_DEL (Data Hold Delay) to Cadence
I3C master constoller driver.
As per MIPI I3C Specification 1.0, Table 75 (page 142) defines
non-zero minimal tHD_PP timing on master output (Fig 65). This
setting allows to meet this timing on master's soc outputs,
regardless of PCB balancing.
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
I need to store address and lvr value for I2C devices without static definition
in DT. This allows secondary master to transmit DEFSLVS command properly.
Main changes between v4 and v5:
- Change in defslvs to use addr and lvr from i2c_dev_desc structure
- Change in CDNS and DW drivers to use addr and lvr from i2c_dev_desc structure
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This simplifies and standardizes slot manipulation code
by using for_each_set_bit() library function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch drops support for I2C devices with 10 bit addressing. When I2C
device with 10 bit address is defined in DT, I3C master registration fails.
Address space for I2C devices has been reduced and ->i2c_funcs() hook has been
removed.
Because this patch series dropped support for 10 bit I2C devices, support is
also dropped in Cadence I3C master driver and Synopsys DesignWare I3C master
driver.
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch fixes I2C transfers in Cadence I3C master driver.
There was no way to queue more than one I2C transfer before.
Fixes: 603f2bee2c ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/i3c/master/i3c-master-cdns.c: In function 'cdns_i3c_master_do_daa':
drivers/i3c/master/i3c-master-cdns.c:1137:16: warning:
variable 'old_i3c_scl_lim' set but not used [-Wunused-but-set-variable]
It never used since introdution in commit
acfab7d324b2 ("i3c: master: Add driver for Cadence IP")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
