Acknowledge the byte count submitted by the target.
When I2C_SMBUS_BLOCK_DATA read operation is executed by
i2c_smbus_xfer_emulated(), the length of the second (read) message is set
to 1. Length of the block is supposed to be obtained from the target by the
underlying bus driver.
The i2c_imx_isr_read() function should emit the acknowledge on i2c bus
after reading the first byte (i.e., byte count) while processing such
message (as defined in Section 6.5.7 of System Management Bus
Specification [1]). Without this acknowledge, the target does not submit
subsequent bytes and the controller only reads 0xff's.
In addition, store the length of block data obtained from the target in
the buffer provided by i2c_smbus_xfer_emulated() - otherwise the first
byte of actual data is erroneously interpreted as length of the data
block.
[1] https://smbus.org/specs/SMBus_3_3_20240512.pdf
Fixes: 5f5c2d4579 ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@leica-geosystems.com>
Cc: <stable@vger.kernel.org> # v6.13+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250520122252.1475403-1-lukasz.kucharczyk@leica-geosystems.com
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).
The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function. It currently
does not save the value returned by spacemit_i2c_xfer_msg().
The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.
When this code was out for review, the return value *was* checked
in early versions. But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().
Simply assigning the value returned to "ret" fixes the problem.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Convert the I2C subsystem to drop using the 'master_'-prefixed callbacks
in favor of the simplified ones. Fix alignment of '=' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
i2c-core updates
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates
- support per-channel alias pools
- added support for dynamic address translation
(also adds FPC202 driver as its user)
- add 'static' and 'passthrough' flags
i2c-host updates
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)
-----BEGIN PGP SIGNATURE-----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=clhN
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----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=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
Remove hard-coded strings by using the str_read_write() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Signed-off-by: Yunjian Long <long.yunjian@zte.com.cn>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The 64-bit division in mlxbf_i2c_get_ticks() causes link failures
when compile-testing on 32-bit machines:
ERROR: modpost: "__udivdi3" [drivers/i2c/busses/i2c-mlxbf.ko] undefined!
Change this to a div_u64(), which should replace the constant division
with a a multiply/shift combination in the mlxbf_i2c_get_ticks().
The frequency calculation functions require a slow library call but
should be used much rarer.
Fixes: 053859002c ("i2c: mlxbf: Allow build with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250520152600.1975628-1-arnd@kernel.org
Signed-off-by: Andi Shyti <andi@smida.it>
Converting the WARN_ON() to a dev_dbg() message in
i2c_dw_clk_rate().
That removes the need to supply a dummy implementation for
the callback (or alternatively a dummy clk device) when the
fallback path is preferred where the existing values already
in the clock registers are used - when a firmware has
programmed the clock registers.
The fallback path was introduced in commit 4fec76e098
("i2c: designware: Fix wrong setting for {ss,fs,hs}_{h,l}cnt
registers").
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250513124015.2568924-1-heikki.krogerus@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.
For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.
This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.
If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.
Example shell script to reproduce the issue:
```
#!/bin/sh
SLAVE_LADDR=0x1010
SLAVE_BUS=13
NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device
# Create initial device
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
sleep 2
# Rapid sequence of
# delete_device -> new_device -> delete_device -> new_device
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
# Using devmem to inspect IC_INTR_MASK will show as zero
```
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Update the I2C bus timing configuration on BlueField to match the
configuration recommended and verified by the HW team.
I2C block read failures were found on BlueField 3 during communication
with a device that requires the use of repeated start conditions.
Testing showed that these failures were caused by the I2C transaction
getting aborted early due to a short bus "timeout" configuration value.
This value determines how long the clock can be held low before the I2C
transaction is aborted.
Upon further inspection, it was also found that other I2C bus timing
configuration values used by the kernel driver do not match the
configuration that is recommended by the HW team and used in the
BlueField BSP I2C drivers.
Signed-off-by: Chris Babroski <cbabroski@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Link: https://lore.kernel.org/r/20250506193059.321345-2-cbabroski@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add support for SMBus repeated start conditions to the Mellanox I2C
driver. This support is specifically enabled for the
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK implementation which is required for
communication with a specific I2C device on BlueField 3.
Signed-off-by: Chris Babroski <cbabroski@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Link: https://lore.kernel.org/r/20250506193059.321345-1-cbabroski@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Extend the Kconfig dependency to include COMPILE_TEST so the
Mellanox BlueField I2C driver can be built on non-ARM64 platforms
for compile testing purposes.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Khalil Blaiech <kblaiech@nvidia.com>
Cc: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20250505215854.2896383-1-andi.shyti@kernel.org
The AMD Image Signal Processor I2C functionality is only present on AMD
platforms with ISP support, and its platform device is instantiated by
the AMD ISP driver. Hence add a dependency on DRM_AMD_ISP, to prevent
asking the user about this driver when configuring a kernel that does
not support the AMD ISP.
Fixes: d6263c468a ("i2c: amd-isp: Add ISP i2c-designware driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://lore.kernel.org/r/3888f892b8c4d8c8acd17e56581e726ace7f7092.1746536495.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Some I2C ATRs can have other I2C ATRs as children. The I2C messages of
the child ATRs need to be forwarded as-is if the parent I2C ATR can
only do static mapping.
In the case of GMSL, the deserializer I2C ATR actually doesn't have I2C
address remapping hardware capabilities, but it is able to select which
GMSL link to talk to, allowing it to change the address of the
serializer.
The child ATRs need to have their alias pools defined in such a way to
prevent overlapping addresses between them, but there's no way around
this without orchestration between multiple ATR instances.
To allow for this use-case, add a flag that allows unmapped addresses
to be passed through, since they are already remapped by the child ATRs.
There's no case where an address that has not been remapped by the child
ATR will hit the parent ATR.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some I2C ATRs do not support dynamic remapping, only static mapping
of direct children.
Mappings will only be added or removed as a result of devices being
added or removed from a child bus.
The ATR pool will have to be big enough to accommodate all devices
expected to be added to the child buses.
Add a new flag that prevents old mappings to be replaced or new mappings
to be created in the alias finding code paths. That mens adding a flags
parameter to i2c_atr_new() and an i2c_atr_flags enum.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
It is possible for aliases to be exhausted while we are still attaching
children.
Allow replacing mapping on attach by calling
i2c_atr_replace_mapping_by_addr() if i2c_atr_create_mapping_by_addr()
fails.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This is the same logic as in i2c_atr_create_mapping_by_addr().
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
It is useless to create a new mapping just to detach it immediately.
Use the newly added i2c_atr_find_mapping_by_addr() function to avoid it,
and exit without logging an error if not found.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The i2c_atr_get_mapping_by_addr() function handles three separate
usecases: finding an existing mapping, creating a new mapping, or
replacing an existing mapping if a new mapping cannot be created
because there aren't enough aliases available.
Split up the function into three different functions handling its
individual usecases to prepare for better usage of each one.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
A find operation implies that a null result is not an error.
Use get naming to clarify things and to prepare for splitting up the
logic inside this function.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When we have an ATR, and another ATR as a subdevice of the first ATR,
we get lockdep warnings for the i2c_atr.lock and
i2c_atr_chan.orig_addrs_lock. This is because lockdep uses a static key
for the locks, and doesn't see the locks of the separate ATR instances
as separate.
Fix this by generating a dynamic lock key per lock instance.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No client sets 'of_node' anymore, so we don't need to handle the case in
the core anymore.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
'of_node' in i2c_boardinfo is deprecated in favor of 'fwnode'. The I2C
core handles them equally, so simply convert this driver to fwnode.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add an useful info when failed to get irq/wakeirq due to -EPROBE_DEFER.
Before:
[ 15.737361] i2c 2-0050: deferred probe pending: (reason unknown)
After:
[ 15.816295] i2c 2-0050: deferred probe pending: tcpci: can't get irq
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
thunderx enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-3-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
ismt enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_region() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_region() with one to
the always-managed pcim_request_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-2-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The driver do support I2C_M_IGNORE_NAK, so add
I2C_FUNC_PROTOCOL_MANGLING to the feature list.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250326-i2c-v1-1-82409ebe9f2b@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Some SMBus controllers may restrict writes to addresses where SPD sensors
may reside. This may lead to some SPD sensors not functioning correctly,
and might need extra handling. Introduce new SPD-instantiating functions
that are aware of this, and use them instead.
Signed-off-by: Yo-Jung Lin (Leo) <leo.lin@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250430-for-upstream-i801-spd5118-no-instantiate-v2-1-2f54d91ae2c7@canonical.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Implement I2C bus recovery support for the RIIC controller by making use
of software-controlled SCL and SDA line manipulation. The controller allows
forcing SCL and SDA levels through control bits, which enables generation
of manual clock pulses and a stop condition to free a stuck bus.
This implementation wires up the bus recovery mechanism using
i2c_generic_scl_recovery and provides get/set operations for SCL and SDA.
This allows the RIIC driver to recover from bus hang scenarios where SDA
is held low by a slave.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250501204003.141134-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
For SMBUS block read, do not continue to read if the message length
passed from the device is '0' or greater than the maximum allowed bytes.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250424053320.19211-1-akhilrajeev@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
This ensures we get all information we need to debug issues when users
forward us their logs.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-4-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add handling for all the missing error condition, and better recovery in
pasemi_smb_clear().
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Co-developed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-3-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The hardware (supposedly) has a 25ms timeout for clock stretching
and the driver uses 100ms which should be plenty.
The interrupt path however misses handling for errors while waiting for
the completion and the polling path uses an open-coded readx_poll_timeout.
Note that we drop reg_write(smbus, REG_SMSTA, status) while fixing those
issues here which will be done anyway whenever the next transaction starts
via pasemi_smb_clear.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-2-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The I2C bus can get stuck under some conditions (desync between
controller and device). The pasemi controllers include an unjam feature
that is enabled on reset, but was being disabled by the driver. Keep it
enabled by explicitly setting the UJM bit in the CTL register. This
should help recover the bus from certain conditions, which would
otherwise remain stuck forever.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-1-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Adjust the indentation of the bcm_iproc_i2c_slave_init() function
definition to match standard kernel coding style. Don't end the
line with an open parenthesis.
Link: https://lore.kernel.org/r/20250418211635.2666234-8-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Replace udelay(100) with usleep_range(100, 200) as recommended
by kernel documentation. The delay is not in atomic context, so
busy-waiting is unnecessary.
Also update the comment for clarity.
Link: https://lore.kernel.org/r/20250418211635.2666234-7-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The 'ret' variable doesn't need to be initialised, as it is
always assigned before use.
While here, reorder the variable declarations in reverse
Christmas tree style, by line length.
Link: https://lore.kernel.org/r/20250418211635.2666234-2-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.
Co-developed-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Signed-off-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250424184952.1290019-1-pratap.nirujogi@amd.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add functions to perform block read and write operations. This applies
for cases where the requested operation is for >8 bytes of data.
When not using the block mode transfer, the driver will attempt a series
of 8 byte i2c operations until it reaches the desired total. For
example, for a 40 byte request the driver will complete 5 separate
transactions. This results in large transactions taking a significant
amount of time to process.
Add block mode such that the driver can request larger transactions, up
to 1024 bytes per transfer.
Many aspects of the block mode transfer is common with the regular 8
byte operations. Use generic functions for parts of the message
construction and sending the message. The key difference for the block
mode is the usage of separate FIFO buffer to store data.
Write to this buffer in the case of a write (before command send).
Read from this buffer in the case of a read (after command send).
Data is written into this buffer by placing data into the MSB onwards.
This means the bottom 8 bits of the data will match the top 8 bits, and
so on and so forth.
Set specific bits in message for block mode, enable block mode transfers
from global i2c management registers, construct message, send message,
read or write from FIFO buffer as required.
The block-mode transactions result in a significant speed increase in
large i2c requests.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20250324192946.3078712-2-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
When changing the #defines to use BIT and GENMASK the bitfield.h include
was added instead of the correct bits.h include.
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250415-pasemi-fixes-v2-1-c543bf53151a@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
When we use constants in a time or frequency related contexts,
it's better to utilise the respective definitions that have
encoded units in them. This will make code better to read and
understand.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250416101702.2128740-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
During init of the bus, the module checks that the bus is idle.
If one of the lines are stuck try to recover them first before failing.
Sometimes SDA and SCL are low if improper reset occurs (e.g., reboot).
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250328193252.1570811-1-mohammed.0.elbadry@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
'struct i2c_algorithm' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
11027 646 16 11689 2da9 drivers/i2c/busses/i2c-rzv2m.o
After:
=====
text data bss dec hex filename
11107 566 16 11689 2da9 drivers/i2c/busses/i2c-rzv2m.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/537d93441ced53bffa6553b8ec93d007e64cb9a5.1743258995.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add corresponding error messages if DMA channels are not available during
probe. Using dev_err_probe adds deferred probe messages as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250408100300.556703-1-alexander.stein@ew.tq-group.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this xgene-slimpro I2C driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411112303.1149086-1-sudeep.holla@arm.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add check for the return value of clk_enable() to catch
the potential error.
This is similar to the commit 8332e66709
("spi: zynq-qspi: Add check for clk_enable()").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250412193713.105838-1-chenyuan0y@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Return value from npcm_i2c_get_slave_addr() directly instead of taking
this in another redundant variable.
This improvement has been suggested by Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Zhang Songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/20250320004321.1914366-1-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Since we have generic definitions for bus frequencies, let's use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250322144736.472777-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-20-jirislaby@kernel.org
If navi_amd_register_client() fails, the previous i2c_dw_probe() call
should be undone by a corresponding i2c_del_adapter() call, as already done
in the remove function.
Fixes: 17631e8ca2 ("i2c: designware: Add driver support for AMD NAVI GPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.13+
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/fcd9651835a32979df8802b2db9504c523a8ebbb.1747158983.git.christophe.jaillet@wanadoo.fr
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Using of_property_read_bool() for non-boolean properties is deprecated
and results in a warning during runtime since commit c141ecc3ce ("of:
Warn when of_property_read_bool() is used on non-boolean properties").
Fixes: b6ef830c60 ("i2c: omap: Add support for setting mux")
Cc: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250415075230.16235-1-johan+linaro@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
When the list_for_each_entry_reverse() exits without hitting a break
then the list cursor points to invalid memory. So this check for
if (c2a->fixed) is checking bogus memory. Fix it by using a "found"
variable to track if we found what we were looking for or not.
The list head (i2c_atr_chan.alias_pairs) is not a full entry, it's just
a struct list_head. When the for loop runs to completion, c2a doesn't
point to a struct i2c_atr_alias_pair, so you can't access c2a->fixed.
Fixes: c3f5524188 ("i2c: Support dynamic address translation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Deferred probe with pm_runtime_put() may delay clock disable, causing
incorrect clock usage count. Use pm_runtime_put_sync() to ensure the
clock is disabled immediately.
Fixes: 13d6eb20fc ("i2c: imx-lpi2c: add runtime pm support")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.16+
Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
SB800_PIIX4_FCH_PM_ADDR is used to indicate the base address for the
FCH PM registers. Multiple drivers may need this base address, so
move related defines to a common header location and rename them
accordingly.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-i2c@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-4-superm1@kernel.org
PIIX4 and compatible controllers are only for X86. As some headers are
being moved into x86 specific headers PIIX4 won't compile on non-x86.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-i2c@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-3-superm1@kernel.org
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The i2c-atr module keeps a list of associations between I2C client aliases
and I2C addresses. This represents the address translation table which is
programmed into an ATR channel at any given time. This list is only updated
when a new client is bound to the channel.
However in some cases, an ATR channel can have more downstream clients than
available aliases. One example of this is an SFP module that is bound to an
FPC202 port. The FPC202 port can only access up to two logical I2C
addresses. However, the SFP module may expose up to three logical I2C
addresses: its EEPROM on 7-bit addresses 0x50 and 0x51, and a PHY
transceiver on address 0x56.
In cases like these, it is necessary to reconfigure the channel's
translation table on the fly, so that all three I2C addresses can be
accessed when needed.
As there are currently no known ATR's which do not support dynamic address
translation, this feature can be enabled by default without breaking
existing use cases.
Modify the i2c-atr module to provide on-the-fly address translation. This
is achieved by modifying an ATR channel's translation table whenever an I2C
transaction with unmapped clients is requested.
Add a mutex to protect alias_list. This prevents
i2c_atr_dynamic_attach/detach_addr from racing with the bus notifier
handler to modify alias_list.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some I2C address translators (ATRs) assign each of their remote peripheral
aliases to a specific channel. To properly handle these devices, add
support for having separate alias pools for each ATR channel.
This is achieved by allowing callers of i2c_atr_add_adapter to pass an
optional alias list. If present, this list will be used to populate the
channel's alias pool. Otherwise, the common alias pool will be used.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The "alias_list" field of struct i2c_atr_chan describes translation table
entries programmed in the ATR channel. This terminology will become more
confusing when per-channel alias pool support is introduced, as struct
i2c_atr_chan will gain a new field called "alias_pool", which will describe
aliases which are available to the ATR channel.
Rename the "alias_list" field to "alias_pairs" to clearly distinguish it
from the future "alias_pool" field.
No functional change is intended.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Each I2C address translator (ATR) has a pool of client aliases which can be
used as translation targets. Some ATRs have a single alias pool shared by
all downstream channels, while others have a separate alias pool for each
channel. Currently, this alias pool is represented by the "aliases",
"num_aliases", and "use_mask" fields of struct i2c_atr.
In preparation for adding per-channel alias pool support, move the
"aliases", "num_aliases", "use_mask" and associated lock to a new struct
called "struct alias_pool".
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The I2C Address Translator (ATR) module defines mappings from i2c_client
structs to aliases. However, only the physical address of each i2c_client
struct is actually relevant to the workings of the ATR module. Moreover,
some drivers require address translation functionality but do not allocate
i2c_client structs, accessing the adapter directly instead. The SFP
subsystem is an example of this.
Replace the "i2c_client" field of the i2c_atr_alias_pair struct with a u16
"addr" field. Rewrite helper functions and callbacks as needed.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
In order to make the underneath API easier to change in the future,
prevent users from dereferencing fwnode from struct device.
Instead, use the specific device_set_node() API for that.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reuse fwnode variable where it makes sense. This avoids unneeded
duplication hidden in some macros and unifies the code for different
types of fwnode.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Switch to fwnode APIs to get IRQ. In particular this enables
a support of the separate wakeup IRQ on non-OF platforms.
The rest is converted just for the sake of consistency and
fwnode reuse.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
OF and ACPI currently are using asymmetrical APIs to check
for the firmware node type. Unify them by using is_*_node()
against struct fwnode_handle pointer.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
OF APIs are usually NULL-aware and return an error in case when
device node is not present or supported. We already have a check
for the returned value, no need to check for the parameter.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Fixes: a076a860ac ("media: i2c: add I2C Address Translator (ATR) support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[wsa: reworded subject]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
i2c-core updates (collected by Wolfram)
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi)
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz)
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros
-----BEGIN PGP SIGNATURE-----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=q/EK
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff5jQTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoVvRD/wKtuwmiA66NJFgXC0qVq82A6fO3bY8
GBdbfysDJIbqGu5PTcULTbJ8qkqv3jeLUv6CcXvS4sZ7y/uJQl2lzf8yrD/0bbwc
rLI6sHiPSZmK93kNVN4X5H7kvt7cE/DYC9nnEOgK3BY5FgKc4n9887d4aVBhL8Lv
ODwVXvZ+xi351YCj7qRyPU24zt/p4tkkT1o2k4a0HBluqLI0D+V20fke9IERUL8r
d1uWKlcn0TqYDesE8HXKIhbst3gx52rMJrXBJDHwFmG6v8Pj1fkTXCVpPo8QcBz8
OTVkpomN9f/Tx4+GZwhZOF86LhLL3OhxD6pT7JhFCXdmSGv+Ez8uyk1YZysM/XpV
Juy/1yAcBpDIDkmhMFGdAAn48Nn9Fotty0r4je60zSEp1d/4QMXcFme29qr2JTUE
iWnQ/HD6DxUjVHqy7CYvvo26Xegg1C7qgyOVt4PYZwAM1VKF5P3kzYTb4SAdxtop
Tpji1sfW9QV08jqMNo6XntD32DSP9S2HqjO9LwBw700jnx2jjJ35fcJs6iodMOUn
gckIZLMn3L0OoglPdyA5O7SNTbKE7aFiRKdnT/cJtR3Fa39Qu27CwC5gfiyuie9I
Q+LG8GLuYSBHXAR+PBK4GWlzJ7Dn8k3eqmbnLeKpRMsU6ZzcttgA64xhaviN2wN0
iJbvLJeisXr3GA==
=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZ97X5hYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uU9AA/RP+DKnscKffF0ZMz7FPDHQ+uzDJ
bi2WU/vKSKORJN9+AQDdxMOCtqQWbwuWZKNFI9UX4YBW2Tv8heCjgzvZXxmiAg==
=P/Dk
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.15
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
