mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 22:23:05 +00:00
loongarch-next
20 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
260f6f4fda |
drm for 6.17-rc1
non-drm: rust: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings mtd: - driver for Intel GPU non-volatile storage i2c - designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmiJM/0ACgkQDHTzWXnE hr6MpA/+JJKGdSdrE95QkaMcOZh/3e3areGXZ0V/RrrJXdB4/DoAfQSHhF0H7m7y MhBGVLGNMXq7KHrz28p1MjLHrE1mwmvJ6hZ4J076ed4u9naoCD0m6k5w5wiue+KL HyPR54ADxN0BYmgV0l/B0wj42KsHyTO4x4hdqPJu02V9Dtmx6FCh2ujkOF3p9nbK GMwWDttl4KEKljD0IvQ9YIYJ66crYGx/XmZi7JoWRrS104K/h1u8qZuXBp5jVKTy OZRAVyLdmJqdTOLH7l599MBBcEd/bNV37/LVwF4T5iFunEKOAiyN0QY0OR+IeRVh ZfOv2/gp4UNyIfyahQ7LKLgEilNPGHoPitvDJPvBZxW2UjwXVNvA1QfdK5DAlVRS D5NoFRjlFFCz8/c2hQwlKJ9o7eVgH3/pK0mwR7SPGQTuqzLFCrAfCuzUvg/gV++6 JFqmGKMHeCoxO2o4GMrwjFttStP41usxtV/D+grcbPteNO9UyKJS4C38n4eamJXM a9Sy9APuAb6F0w5+yMItEF7TQifgmhIbm5AZHlxE1KoDQV6TdiIf1Gou5LeDGoL6 OACbXHJPL52tUnfCRpbfI4tE/IVyYsfL01JnvZ5cZZWItXfcIz76ykJri+E0G60g yRl/zkimHKO4B0l/HSzal5xROXr+3VzeWehEiz/ot1VriP5OesA= =n9MO -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ... |
||
|
Joel Fernandes
|
4d3e891388 |
gpu: nova-core: Clarify sysmembar operations
sysmembar is a critical operation that the GSP falcon needs to perform in the reset sequence. Add some code comments to clarify. [acourbot@nvdidia.com: move relevant documentation to SysmemFlush type] Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250708-nova-docs-v4-2-9d188772c4c7@nvidia.com [ Minor grammar fix in the PFB register documentation. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Danilo Krummrich
|
f5d3ef25d2 |
rust: devres: get rid of Devres' inner Arc
So far Devres uses an inner memory allocation and reference count, i.e. an inner Arc, in order to ensure that the devres callback can't run into a use-after-free in case where the Devres object is dropped while the devres callback runs concurrently. Instead, use a completion in order to avoid a potential UAF: In Devres::drop(), if we detect that we can't remove the devres action anymore, we wait for the completion that is completed from the devres callback. If, in turn, we were able to successfully remove the devres action, we can just go ahead. This, again, allows us to get rid of the internal Arc, and instead let Devres consume an `impl PinInit<T, E>` in order to return an `impl PinInit<Devres<T>, E>`, which enables us to get away with less memory allocations. Additionally, having the resulting explicit synchronization in Devres::drop() prevents potential subtle undesired side effects of the devres callback dropping the final Arc reference asynchronously within the devres callback. Reviewed-by: Benno Lossin <lossin@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20250626200054.243480-4-dakr@kernel.org [ Move '# Invariants' below '# Examples'. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
3606620b31 |
gpu: nova-core: update and annotate TODO list
A few new dependencies are required to remove some of the TODO items: - A way to safely convert from byte slices to types implementing `FromBytes`, - A way to obtain slices and write into a `CoherentAllocation`, - Several improvements to the `register!()` macro, - Alignment operations to powers of two, and an equivalent to the C `fls`, - Support for `xa_alloc` in the XAlloc bindings. Some items have also become obsolete: - The auxiliary bus abstractions have been implemented and are in use, - The ELF utilities are not considered for being part of the core kernel bindings anymore. - VBIOS, falcon and GPU timer have been completed. We now have quite a few TODO entries in the code, so annotate them with a 4 letter code representing the corresponding task in `todo.rst`. This allows to easily find which part of the code corresponds to a given entry (and conversely). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-24-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
859aa3d940 |
gpu: nova-core: load and run FWSEC-FRTS
With all the required pieces in place, load FWSEC-FRTS onto the GSP falcon, run it, and check that it successfully carved out the WPR2 region out of framebuffer memory. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-23-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
31f0feefb4 |
gpu: nova-core: extract FWSEC from BIOS and patch it to run FWSEC-FRTS
The FWSEC firmware needs to be extracted from the VBIOS and patched with the desired command, as well as the right signature. Do this so we are ready to load and run this firmware into the GSP falcon and create the FRTS region. [joelagnelf@nvidia.com: give better names to FalconAppifHdrV1's fields] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-22-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
80213934d0 |
gpu: nova-core: compute layout of the FRTS region
FWSEC-FRTS is run with the desired address of the FRTS region as parameter, which we need to compute depending on some hardware parameters. Do this in a `FbLayout` structure, that will be later extended to describe more memory regions used to boot the GSP. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-20-ecf41ef99252@nvidia.com [ In doc-comment of FbLayout s/bootup process/boot process/ - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Joel Fernandes
|
6fda04e7f0 |
gpu: nova-core: vbios: Add base support for VBIOS construction and iteration
Add support for navigating the VBIOS images required for extracting ucode data for GSP to boot. Later patches will build on this. Debug log messages will show the BIOS images: [102141.013287] NovaCore: Found BIOS image at offset 0x0, size: 0xfe00, type: PciAt [102141.080692] NovaCore: Found BIOS image at offset 0xfe00, size: 0x14800, type: Efi [102141.098443] NovaCore: Found BIOS image at offset 0x24600, size: 0x5600, type: FwSec [102141.415095] NovaCore: Found BIOS image at offset 0x29c00, size: 0x60800, type: FwSec Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Shirish Baskaran <sbaskaran@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Timur Tabi <ttabi@nvidia.com> Cc: Ben Skeggs <bskeggs@nvidia.com> [ acourbot@nvidia.com: fix clippy warnings, read_more() function ] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-17-ecf41ef99252@nvidia.com [ Replace extend_with() and copy_from_slice() with extend_from_slice(); re-format and use markdown in comments. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
69f5cd67ce |
gpu: nova-core: add falcon register definitions and base code
Booting the GSP on Ampere requires an intricate dance between the GSP and SEC2 falcons, where the GSP starts by running the FWSEC firmware to create the WPR2 region , and then SEC2 loads the actual RISC-V firmware into the GSP. Add the common Falcon code and HAL for Ampere GPUs, and instantiate the GSP and SEC2 Falcons that will be required to perform that dance and boot the GSP. Thanks to Ben Skeggs for pointing out an important bug in the memory scrubbing code that could lead to a race condition and ultimately a failure to boot the GSP! Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-15-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
6554ad65b5 |
gpu: nova-core: register sysmem flush page
Reserve a page of system memory so sysmembar can perform a read on it if a system write occurred since the last flush. Do this early as it can be required to e.g. reset the GPU falcons. Chipsets capabilities differ in that respect, so this commit also introduces the FB HAL. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-14-ecf41ef99252@nvidia.com [ * Use kernel::page::PAGE_SIZE instead of kernel::bindings::PAGE_SIZE. * Get rid of the Option for SysmemFlush. * Slightly reword SysmemFlush doc-comments. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
bbe5db7610 |
gpu: nova-core: wait for GFW_BOOT completion
Upon reset, the GPU executes the GFW (GPU Firmware) in order to initialize its base parameters such as clocks. The driver must ensure that this step is completed before using the hardware. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-12-ecf41ef99252@nvidia.com [ Slightly adjust comments in wait_gfw_boot_completion(). - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Linus Torvalds
|
b08494a8f7 |
drm for 6.16-rc1
new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - remove disgusting turds - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmg2aVAACgkQDHTzWXnE hr6DjhAApr2fZjugU3EmpsARdcIWgEd+X65R97ef7RlUGqBKm2joSwZGOhH0oBsG 9WyO92Qzu6XMe8OibKqY4D2hir9UPz5v+uEWe3q9CzZGbNyAwyVRjVkaKpnI9upv 1dmHFI7HgPu6qbz6RfPIfgALBLXvVXMaQ4+ZgN/cLtZFa+OLAV5ByqWsRPPXZFb0 F/pQGQ4ursglfA+LH3SVPfnTN53lu93IlM5/Os9OQQGj+44w94zQ6DCm7CY1AugH n+RM/0Yv7WaoF1ByeOtq4FcrmLRrd+ozsvITbRZqhOx7zS/mhP8LRzAwgKWOYzSh puKunyQiSdHR7FSqSi8uyY3YumcLWNa/17LMKoTf+KqweJbKGE7RVBuFBn6WUdPb AYHZrSB4USAeyahdrrsU+q7ltu5urs5ckpbXsRurMiaUz/BLim1PIm3N5FDLPY7B PD1n1FcMUv3CmJT5Y+aNIQgmf1/dETESRTSAgSoOo3gNp6jdRCYqSuWIBsppibWT 26+tyz0/FGhE50QviHzg0Sv+jd/g93fN6snNlV8wNFMviq3bC69Toa+y3qJ5e7UC /42R7nCWdkCZJfr6E67rOaahe9TDV/LXLqPErwptOkdK8sMchaIgF+deybgTtTi/ zGRBfjLvb5ocYBmPbeGX4mtXNRpyZ3o9I0QUyGUO4zMwFXmFwn0= =jpVr -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ... |
||
|
Alexandre Courbot
|
61479ae38c |
gpu: nova-core: move Firmware to firmware module
We will extend the firmware methods, so move it to its own module instead to keep gpu.rs focused. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250507-nova-frts-v3-7-fcb02749754d@nvidia.com [ Don't require a bound device, remove pub visibility from Firmware fields, use FIRMWARE_VERSION consistently. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
e4bc82af9e |
gpu: nova-core: fix layout of NV_PMC_BOOT_0
The layout of NV_PMC_BOOT_0 has two small issues: - The "chipset" field, while useful to identify a chip, is actually an aggregate of two distinct fields named "architecture" and "implementation". - The "architecture" field is split, with its MSB being at a different location than the rest of its bits. Redefine the register layout to match its actual definition as provided by OpenRM and expose the fully-constructed "architecture" field through our own "Architecture" type. The "chipset" pseudo-field is also useful to have, so keep providing it. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250507-nova-frts-v3-6-fcb02749754d@nvidia.com [ Use Result from kernel::prelude. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
c3f2226267 |
gpu: nova-core: define registers layout using helper macro
Add the register!() macro, which defines a given register's layout and provide bit-field accessors with a way to convert them to a given type. This macro will allow us to make clear definitions of the registers and manipulate their fields safely. The long-term goal is to eventually move it to the kernel crate so it can be used by other drivers as well, but it was agreed to first land it into nova-core and make it mature there. To illustrate its usage, use it to define the layout for the Boot0 (renamed to NV_PMC_BOOT_0 to match OpenRM's naming scheme) and take advantage of its accessors. Suggested-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250507-nova-frts-v3-5-fcb02749754d@nvidia.com [ Fix typo in commit message. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
a2a637ffdf |
gpu: nova-core: take bound device in Gpu::new
We will need to perform things like allocating DMA memory during device creation, so make sure to take the device context that will allow us to perform these actions. This also allows us to use Devres::access to obtain the BAR without holding a RCU lock. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250507-nova-frts-v3-4-fcb02749754d@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
44dda4353b |
gpu: nova-core: add missing GA100 definition
linux-firmware contains a directory for GA100, and it is a defined chipset in Nouveau. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250507-nova-frts-v3-3-fcb02749754d@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alexandre Courbot
|
297b2cd6ba |
gpu: nova-core: derive useful traits for Chipset
We will commonly need to compare chipset versions, so derive the ordering traits to make that possible. Also derive Copy and Clone since passing Chipset by value will be more efficient than by reference. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250507-nova-frts-v3-2-fcb02749754d@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Miguel Ojeda
|
211dcf7785 |
rust: clean Rust 1.88.0's clippy::uninlined_format_args lint
Starting with Rust 1.88.0 (expected 2025-06-26) [1], `rustc` may move
back the `uninlined_format_args` to `style` from `pedantic` (it was
there waiting for rust-analyzer suppotr), and thus we will start to see
lints like:
warning: variables can be used directly in the `format!` string
--> rust/macros/kunit.rs:105:37
|
105 | let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
105 - let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
105 + let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{test}");
There is even a case that is a pure removal:
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:51:13
|
51 | format!("{field}={content}\0", field = field, content = content)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
51 - format!("{field}={content}\0", field = field, content = content)
51 + format!("{field}={content}\0")
The lints all seem like nice cleanups, thus just apply them.
We may want to disable `allow-mixed-uninlined-format-args` in the future.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14160 [1]
Acked-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Danilo Krummrich
|
54e6baf123 |
gpu: nova-core: add initial driver stub
Add the initial nova-core driver stub. nova-core is intended to serve as a common base for nova-drm (the corresponding DRM driver) and the vGPU manager VFIO driver, serving as a hard- and firmware abstraction layer for GSP-based NVIDIA GPUs. The Nova project, including nova-core and nova-drm, in the long term, is intended to serve as the successor of Nouveau for all GSP-based GPUs. The motivation for both, starting a successor project for Nouveau and doing so using the Rust programming language, is documented in detail through a previous post on the mailing list [1], an LWN article [2] and a talk from LPC '24. In order to avoid the chicken and egg problem to require a user to upstream Rust abstractions, but at the same time require the Rust abstractions to implement the driver, nova-core kicks off as a driver stub and is subsequently developed upstream. Link: https://lore.kernel.org/dri-devel/Zfsj0_tb-0-tNrJy@cassiopeiae/T/#u [1] Link: https://lwn.net/Articles/990736/ [2] Link: https://youtu.be/3Igmx28B3BQ?si=sBdSEer4tAPKGpOs [3] Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250306222336.23482-5-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org> |