Add a function to init ggtt for kunit, and use the GGTT function for
initialising the GGTT node without populating it. This
prevents the test from ever knowing about struct xe_ggtt.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250505121924.921544-11-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Split the GGTT PTE readout to a separate function, this is useful for
adding testcases in the next commit, and also cleaner than manually
reading out GGTT.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://lore.kernel.org/r/20250505121924.921544-10-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
For DPT, it is sufficient to get the GGTT encode flags to fill the DPT.
Create a function to return the encode flags, and then encode using the
BO address.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://lore.kernel.org/r/20250505121924.921544-7-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Pinning large linear display framebuffers is becoming a bottleneck.
My plan of attack is doing a custom walk over the BO, this allows for
easier optimization of consecutive entries.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250505121924.921544-6-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Instead of allocating inside xe_tile, create a new function that returns
an allocated struct xe_ggtt from xe_ggtt.c
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250505121924.921544-4-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Another requirement of hiding more of struct xe_ggtt.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250505121924.921544-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
This is the first step to hide the details of struct xe_ggtt.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250505121924.921544-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
We have only one GGTT for all IOV functions, with each VF having assigned
a range of addresses for its use. After migration, a VF can receive a
different range of addresses than it had initially.
This implements shifting GGTT addresses within drm_mm nodes, so that
VMAs stay valid after migration. This will make the driver use new
addresses when accessing GGTT from the moment the shifting ends.
By taking the ggtt->lock for the period of VMA fixups, this change
also adds constraint on that mutex. Any locks used during the recovery
cannot ever wait for hardware response - because after migration,
the hardware will not do anything until fixups are finished.
v2: Moved some functs to xe_ggtt.c; moved shift computation to just
after querying; improved documentation; switched some warns to asserts;
skipping fixups when GGTT shift eq 0; iterating through tiles (Michal)
v3: Updated kerneldocs, removed unused funct, properly allocate
balloning nodes if non existent
v4: Re-used ballooning functions from VF init, used bool in place of
standard error codes
v5: Renamed one function
v6: Subject tag change, several kerneldocs updated, some functions
renamed, some moved, added several asserts, shuffled declarations
of variables, revealed more detail in high level functions
v7: Fixed typos, added `_locked` suffix to some functs, improved
readability of asserts, removed unneeded conditional
v8: Moved one function, removed implementation detail from kerneldoc,
added asserts
v9: Code shuffling without much change, and one param rename
v10: Minor error path change, added printing the shift via debugfs
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-3-tomasz.lis@intel.com
The balloon nodes, which are used to fill areas of GGTT inaccessible
for a specific VF, were allocated and inserted into GGTT within one
function. To be able to re-use that insertion code during VF
migration recovery, we need to split it.
This patch separates allocation (init/fini functs) from the insertion
of balloons (balloon/deballoon functs). Locks are also moved to ensure
calls from post-migration recovery worker will not cause a deadlock.
v2: Moved declarations to proper header
v3: Rephrased description, introduced "_locked" versions of some
functs, more lockdep checks, some functions renamed, altered error
handling, added missing kerneldocs.
v4: Suffixed more functs with `_locked`, moved lockdep asserts,
fixed finalization in error path, added asserts
v5: Renamed another few functs, used xe_ggtt_node_allocated(),
moved lockdep back again to avoid null dereference, added
asserts, improved comments
v6: Changed params of cleanup_ggtt()
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-2-tomasz.lis@intel.com
In some rare cases, the drm_mm node cannot be removed synchronously
due to runtime PM conditions. In this situation, the node removal will
be delegated to a workqueue that will be able to wake up the device
before removing the node.
However, in this situation, the lifetime of the xe_ggtt_node cannot
be restricted to the lifetime of the parent object. So, this patch
introduces the infrastructure so the xe_ggtt_node struct can be
allocated in advance and freed when needed.
By having the ggtt backpointer, it also ensure that the init function
is always called before any attempt to insert or reserve the node
in the GGTT.
v2: s/xe_ggtt_node_force_fini/xe_ggtt_node_fini and use it
internaly (Brost)
v3: - Use GF_NOFS for node allocation (CI)
- Avoid ggtt argument, now that we have it inside the node (Lucas)
- Fix some missed fini cases (CI)
v4: - Fix SRIOV critical case where config->ggtt_region was
lost (Michal)
- Avoid ggtt argument also on removal (missed case on v3) (Michal)
- Remove useless checks (Michal)
- Return 0 instead of negative errno on a u32 addr. (Michal)
- s/xe_ggtt_assign/xe_ggtt_node_assign for coherence, while we
are touching it (Michal)
v5: - Fix VFs' ggtt_balloon
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-11-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
These operations are related to node. Convert them to the
new appropriate name space xe_ggtt_node.
v2: Also move arguments around for consistency (Lucas).
v3: s/node_balloon/node_insert_balloon and
s/node_deballoon/node_remove_balloon (Michal).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-10-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce a new xe_ggtt_print_holes helper that attends the SRIOV
demand and finishes the goal of limiting drm_mm access to xe_ggtt.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-9-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce a new xe_ggtt_largest_hole helper that attends the SRIOV
demand and continue with the goal of limiting drm_mm access to xe_ggtt.
v2: Fix a typo (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-8-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The xe_ggtt component uses drm_mm to manage the GGTT.
The drm_mm_node is just a node inside drm_mm, but in Xe we use that
only in the GGTT context. So, this patch encapsulates the drm_mm_node
into a xe_ggtt's new struct.
This is the first step towards limiting all the drm_mm access
through xe_ggtt. The ultimate goal is to have a better control of
the node insertion and removal, so the removal can be delegated
to a delayed workqueue.
v2: Fix includes and typos (Michal and Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Apparently this was only useful when enabling ggtt support
for the very first time and never used again.
It is also not useful now that we have the ggtt_dump available
through debugfs.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
VF's drivers can't modify GGTT PTEs except the range explicitly
assigned by the PF driver. To allow hardware enforcement of this
requirement, each GGTT PTE has a field with the VF number that
identifies which VF can modify that particular GGTT PTE entry.
Only PF driver can modify this field and PF driver shall do that
before VF drivers will be loaded. Add function to prepare PTEs.
Since it will be used only by the PF driver, make it available
only for CONFIG_PCI_IOV=y.
Bspec: 45015, 52395
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-3-michal.wajdeczko@intel.com
Add XE_BO_GGTT_INVALIDATE flag which indicates the GGTT should be
invalidated when a BO is added / removed from the GGTT. This is
typically set when a BO is used by the GuC as the GuC has GGTT TLBs.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
[mlankhorst: Small fix to only inherit GGTT_INVALIDATE from src bo]
[mlankhorst: Remove _BIT from name]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306052002.311196-4-matthew.brost@intel.com
Only buffers mapped in the GGTT used by the GuC require an invalidation.
Display buffers do not require an invalidation. Delete the invalidatio
from display code and make invalidation a static function in xe_ggtt.c.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306052002.311196-3-matthew.brost@intel.com
Soon we will be required to exclude some of the GGTT addresses
from the allocations, since on some platforms running the SR-IOV VF
mode, we will be able to use only selected range of the GGTT space.
Add helper functions to manage such GGTT range exclusions, and
follow the naming from the similar concept used by GVT-g.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240111182559.629-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
GuC will need to be loaded earlier during probe. Having functional GGTT
is one of the prerequisites.
Also rename xe_ggtt_init_noalloc to xe_ggtt_init_early to match the new
call site.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use 2 different functions for encoding the ggtt's pte, assigning them
during initialization. Main difference is that before Xe-LPG, the pte
didn't have the cache bits.
v2: Re-use xelp_ggtt_pte_encode_bo() for the common part with
xelpg_ggtt_pte_encode_bo() (Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20230927193902.2849159-11-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GGTT exists at the tile level. When a tile contains multiple GTs,
they share the same GGTT.
v2:
- Include some changes that were mis-squashed into the VRAM patch.
(Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Adding a debugfs dump of GGTT was useful for some debugging I did,
and easy to add. Might be useful for others too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
I saw a flicker when booting xe, and it's very likely that the original
FB was not mapped at the same place when inheriting, fix it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
