Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 25a2aa779f ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8aa7306631)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add support to manage power limits using pcode mailbox commands
for supported platforms.
v2:
- Address review comments. (Badal)
- Use mailbox commands instead of registers to manage power limits
for BMG.
- Clamp the maximum power limit to GPU firmware default value.
v3:
- Clamp power limit in write also for platforms with mailbox support.
v4:
- Remove unnecessary debug prints. (Badal)
v5:
- Update description of variable pl1_on_boot to fix kernel-doc error.
v6:
- Improve commit message, refer to BIOS as GPU firmware.
- Change macro READ_PL_FROM_BIOS to READ_PL_FROM_FW.
- Rectify drm_warn to drm_info.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: e90f7a58e6 ("drm/xe/hwmon: Add HWMON support for BMG")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250529163458.2354509-2-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 7596d839f6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add hwmon support for temp2_input and temp3_input attributes, which will
expose package and vram temperature in millidegree Celsius. With this in
place we can monitor temperature using lm-sensors tool.
v2: Reuse existing channels (Badal, Karthik)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131054502.1528555-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
PACKAGE_RAPL_LIMIT register (1.x * power(2,y))
v2: Get rpm wake ref while accessing power1_max_interval
v3: %s/hwmon/xe_hwmon/
v4:
- As power1_max_interval is rw attr take lock in read function as well
- Refine comment about val to fix point conversion (Andi)
- Update kernel version and date in doc
v5: Fix review comments (Anshuman)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030115618.1382200-4-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
