Some users apply PINNED and some don't when using pin_map(). The pin in
pin_map() should imply PINNED so just unconditionally apply it and clean
up all users.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250403102440.266113-14-matthew.auld@intel.com
Add display specific wrappers around the i915 and xe dedicated runtime
PM interfaces. There are no conversions here, just the wrappers.
Implement with_intel_display_rpm() without needing to provide a local
variable, which neatly narrows the scope and hides the type of the
wakeref cookie.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/086b312367fa0fbd8de92e9764117aa7ff4a8cc5.1742483007.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_hotplug.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cf382dbfacf1445b26fbe1e7c011e7a3ea6e1594.1742481923.git.jani.nikula@intel.com
Plane->min_alignment returns an unsigned int so lets use that in the whole
relevant call chain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307111402.26577-5-tvrtko.ursulin@igalia.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c36e3442ea)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Rework fbdev probing to support fbdev_probe in struct drm_driver
and remove the old fb_probe callback. Provide an initializer macro
that sets the callback in struct drm_driver according to the kernel
configuration. Call drm_client_setup_with_color_mode() to run the
kernel's default client setup for DRM.
This commit also prepares support for the kernel's drm_log client
(or any future client) in i915. Using drm_log will also require vmap
support in GEM objects.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-11-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Implement drm_client_dev_suspend() and drm_client_dev_resume() for
i915's fbdev emulation and call the helper via DRM client interfaces.
This is required to convert i915 and xe to DRM's generic fbdev client.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-2-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
FBDEV ggtt is not restored correctly, add missing GGTT flag to
intel_fbdev_fb_alloc to make it work. This ensures that the global
GGTT mapping is always restored on resume. The GGTT mapping would
otherwise be created in intel_fb_pin_to_ggtt() by intel_fbdev anyway.
This fixes the fbdev device not working after resume.
Fixes: 67a98f7e27 ("drm/xe/display: Re-use display vmas when possible")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305110106.564366-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
With the primary goal of removing #include "i915_vma.h" from
intel_display_types.h, move intel_plane_ggtt_offset() to a proper
function in intel_atomic_plane.c. This reveals tons of implicit
dependencies all over the place that we pulled in via i915_vma.h. Fix
the fallout.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70ac6d19518f355abf37ac8c4b0f1d18878be28c.1740412806.git.jani.nikula@intel.com
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
-----BEGIN PGP SIGNATURE-----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=WDS6
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-02-24' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
Handle it as part of xe_display_fini(). The error handling was already
calling it if a step after xe_display_init() failed. Just re-use the
same xe_display_fini() for driver remove.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250222001051.3012936-8-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that component drivers are compatible with devm, switch to using it
instead of our own.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250222001051.3012936-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
No functional change. This patch only splits the xe_display_pm
suspend/resume functions in the regular suspend/resume from the
runtime/d3cold ones.
v2: - Rename d3cold functions (Jonathan)
- Rebase
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218010330.761340-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce i915_error_regs as the EIR/EMR counterpart
to the IIR/IMR/IER i915_irq_regs, and update the irq
reset/postingstall to utilize them accordingly.
v2: Include xe compat versions
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-7-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_display_fini() undoes things from xe_display_init() (technically from
intel_display_driver_probe()). Those `goto err` in xe_device_probe()
were wrong and being accumulated over time.
Commit 65e366ace5 ("drm/xe/display: Use a single early init call for
display") made it easier to fix now that we don't have xe_display_* init
calls spread on xe_device_probe(). Change xe_display_init() to use
devm_add_action_or_reset() that will finalize display in the right
order.
While at it, also add a newline and comment about calling
xe_driver_flr_fini.
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This function will synchronously cancel and wait for many display
work queue items, which might try to take the runtime pm reference
causing a bad deadlock. So, remove it from the runtime_pm suspend patch.
Reported-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212192447.402715-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make the intel_fb_bo.h interfaces operated purely in base
drm_ types so that each driver (i915 and xe) doesn't have to
know about each other, or the display stuff.
v2: s/dev/drm/ (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-4-ville.syrjala@linux.intel.com
Currently i915_gem_object_pin_to_display_plane() uses
i915_gem_object_get_tile_row_size() to calculate the tile row
size for the VT-d guard w/a. That's not really proper since
i915_gem_object_get_tile_row_size() only works for fenced BOs,
nor does it take rotation into account.
Remedy the situation by calculating the VT-d guard size in the
display code where we have more information readily available.
Although the default guard size (168 PTEs now) should cover
the more typical fb size use cases anyway, and only very large
Y/Yf-tiled framebuffers might have tile row size that exceeds it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The driver needs to know if a BO is encrypted with PXP to enable the
display decryption at flip time.
Furthermore, we want to keep track of the status of the encryption and
reject any operation that involves a BO that is encrypted using an old
key. There are two points in time where such checks can kick in:
1 - at VM bind time, all operations except for unmapping will be
rejected if the key used to encrypt the BO is no longer valid. This
check is opt-in via a new VM_BIND flag, to avoid a scenario where a
malicious app purposely shares an invalid BO with a non-PXP aware
app (such as a compositor). If the VM_BIND was failed, the
compositor would be unable to display anything at all. Allowing the
bind to go through means that output still works, it just displays
garbage data within the bounds of the illegal BO.
2 - at job submission time, if the queue is marked as using PXP, all
objects bound to the VM will be checked and the submission will be
rejected if any of them was encrypted with a key that is no longer
valid.
Note that there is no risk of leaking the encrypted data if a user does
not opt-in to those checks; the only consequence is that the user will
not realize that the encryption key is changed and that the data is no
longer valid.
v2: Better commnnts and descriptions (John), rebase
v3: Properly return the result of key_assign up the stack, do not use
xe_bo in display headers (Jani)
v4: improve key_instance variable documentation (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-11-daniele.ceraolospurio@intel.com
Now that interrupts are disabled for xe_display_init_noaccel,
both xe_display_init_noirq and xe_display_init_noaccel run in the same
context.
This means that we can get rid of the 3 different init calls. Without
interrupts, nothing is touching display up to this point.
Unify those 3 early display calls into a single xe_display_init_early(),
this makes the init sequence cleaner, and display less tangled during
init.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121142850.4960-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
We're changing the driver to have no interrupts during early init for
Xe, so we poll the PIPE_FRMSTMSMP counter instead.
Interrupts cannot be enabled during FB readout because memirq's requires
an allocation. This would overwrite the FB we want to read out.
While it might be possible to also run do the same in i915 and run
it without interrupts, the platforms i915 supports had a less clear
distinction between display and graphics. For this reason I choose
only to touch Xe for now.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121142850.4960-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a815362752 ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
i915 has this really nice, infrastructure where everything becomes
complicated, GGTT needs eviction, etc..
Lets not do that, and make the dumbest possible interface instead.
Try to retrieve the VMA from old_plane_state, or intel_fbdev if kernel
fb.
Link: https://patchwork.freedesktop.org/patch/msgid/20241206182032.196307-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Tested-by: Jani Saarinen <jani.saarinen@intel.com>
The irq.enabled flag was protected by a spin lock (irq.lock).
By making it atomic we no longer need to wait for the spin lock in
irq handlers. This will become especially useful for MSI-X irq
handlers to prevent lock contention between different interrupts.
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210173506.202150-1-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Going forward, struct intel_display will be the main display driver
structure. Convert the main display entry points to struct
intel_display.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204102150.2223455-1-jani.nikula@intel.com
ttm_bo_access() returns the size on success, account for that otherwise
the caller incorrectly thinks this is an error in
intel_atomic_prepare_plane_clear_colors().
v2 (Thomas)
- Make sure we check for the partial copy case. Also since this api is
easy to get wrong, wrap the whole thing in a new helper to hide the
details and then convert the existing users over.
Fixes: b6308aaa24 ("drm/xe/display: Update intel_bo_read_from_page to use ttm_bo_access")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3661
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202170102.88893-2-matthew.auld@intel.com
Going forward, struct intel_display is the main device data structure
for display. Convert the high level interfaces (init, cleanup, suspend,
resume, etc.) of intel_display_power.c over to it. The actual power
get/put etc. are left for follow-up.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1761b0fe5081bf6ca21cca3430befe254f61b32.1732808222.git.jani.nikula@intel.com
We currently are not calling display runtime suspend functions when
D3cold is not allowed. Because of that, we end up not disabling dynamic
DC states (and do not go to DC9). With dynamic DC states enabled, we
will also have DMC wakelock enabled. Since we use a delayed work to
release the DMC wakelock, the work might get executed a little too late
(after the PCI device has been put to D3hot) and we get a timeout
warning ("DMC wakelock release timed out") because the MMIO for
releasing the wakelock will be invalid after that point.
To fix that, make sure we flush the release work at the end of
xe_display_pm_runtime_suspend_late(). We can do that unconditionally
because, if there is no pending work, that turns into a no-op.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129164010.29887-4-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current behavior for the runtime suspend case is that
xe_display_pm_suspend_late() is only called when D3cold is allowed.
Let's incorporate that behavior into a function specific to runtime PM
and call it xe_display_pm_runtime_suspend_late().
With that, we keep stuff a bit more self-contained and allow having a
place for adding more "late display runtime suspend"-related logic that
isn't dependent on the "D3cold allowed" state.
v2:
- Fix typo in that caused xe_display_pm_runtime_suspend_late() to call
itself instead of xe_display_pm_suspend_late().
- Add the empty version of xe_display_pm_runtime_suspend_late() for
the !CONFIG_DRM_XE_DISPLAY case.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129164010.29887-3-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make bo->ggtt an array to support bo mapping on multiple ggtts.
Add XE_BO_FLAG_GGTTx flags to map the bo on ggtt of tile 'x'.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241120000222.204095-2-John.C.Harrison@Intel.com
Move intel_power_domains_{suspend,resume} to inside
intel_display_power_{suspend_late, resume_early}.
With this also change the VLV suspend failure to call
the intel_display_power_resume_early. In the end, the only
function executed there for VLV is the intel_power_domains_resume.
Besides make the code more consistency give the call that was
immediately before: intel_display_power_suspend_late.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-7-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Define and parse OA sync properties (Ashutosh)
Driver Changes:
- Add caller info to xe_gt_reset_async (Nirmoy)
- A large forcewake rework / cleanup (Himal)
- A g2h response timeout fix (Badal)
- A PTL workaround (Vinay)
- Handle unreliable MMIO reads during forcewake (Shuicheng)
- Ufence user-space access fixes (Nirmoy)
- Annotate flexible arrays (Matthew Brost)
- Enable GuC lite restore (Fei)
- Prevent GuC register capture on VF (Zhanjun)
- Show VFs VRAM / LMEM provisioning summary over debugfs (Michal)
- Parallel queues fix on GT reset (Nirmoy)
- Move reference grabbing to a job's dma-fence (Matt Brost)
- Mark a number of local workqueues WQ_MEM_RECLAIM (Matt Brost)
- OA synchronization support (Ashutosh)
- Capture all available bits of GuC timestamp to GuC log (John)
- Increase readability of guc_info debugfs (John)
- Add a mmio barrier before GGTT invalidate (Matt Brost)
- Don't short-circuit TDR on jobs not started (Matt Brost)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZyNrWgAKCRC4FpNVCsYG
v4rZAQDp5hlcb3TP1mPXrUBJ66fGvCx5ncg0jVuYFmGOUGyxBQD/WfvyW8ZQQDtZ
QYp5EU2ECE4T7mLgMI9+WA6+1AfDwwA=
=1B9X
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-10-31' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Define and parse OA sync properties (Ashutosh)
Driver Changes:
- Add caller info to xe_gt_reset_async (Nirmoy)
- A large forcewake rework / cleanup (Himal)
- A g2h response timeout fix (Badal)
- A PTL workaround (Vinay)
- Handle unreliable MMIO reads during forcewake (Shuicheng)
- Ufence user-space access fixes (Nirmoy)
- Annotate flexible arrays (Matthew Brost)
- Enable GuC lite restore (Fei)
- Prevent GuC register capture on VF (Zhanjun)
- Show VFs VRAM / LMEM provisioning summary over debugfs (Michal)
- Parallel queues fix on GT reset (Nirmoy)
- Move reference grabbing to a job's dma-fence (Matt Brost)
- Mark a number of local workqueues WQ_MEM_RECLAIM (Matt Brost)
- OA synchronization support (Ashutosh)
- Capture all available bits of GuC timestamp to GuC log (John)
- Increase readability of guc_info debugfs (John)
- Add a mmio barrier before GGTT invalidate (Matt Brost)
- Don't short-circuit TDR on jobs not started (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZyNvA_vZZYR-1eWE@fedora
Backmerging to get up-to-date and to bring in a fix that was
merged through drm-misc-fixes.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
../drivers/gpu/drm/xe/display/xe_display.c: In function ‘xe_display_pm_shutdown’:
../drivers/gpu/drm/xe/display/xe_display.c:382:27: error: passing argument 1 of ‘intel_dmc_suspend’ from incompatible pointer type [-Werror=incompatible-pointer-types]
382 | intel_dmc_suspend(xe);
| ^~
| |
| struct xe_device *
In file included from ../drivers/gpu/drm/xe/display/xe_display.c:24:
../drivers/gpu/drm/i915/display/intel_dmc.h:22:46: note: expected ‘struct intel_display *’ but argument is of type ‘struct xe_device *’
22 | void intel_dmc_suspend(struct intel_display *display);
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
Fixes: c141cf7691 ("Merge drm/drm-next into drm-intel-next")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022080943.763580-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Update the return handling of xe_force_wake_get()
to reflect this behavior, and ensure that the return value is passed as
input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
v5
- return unsigned int for xe_force_wake_get()
v7
- Fix commit message
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-8-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atm the display HPD interrupts that got disabled during runtime
suspend, are re-enabled only if d3cold is enabled. Fix things by
also re-enabling the interrupts if d3cold is disabled.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009194358.1321200-5-imre.deak@intel.com
For clarity separate the d3cold and non-d3cold runtime PM handling. The
only change in behavior is disabling polling later during runtime
resume. This shouldn't make a difference, since the poll disabling is
handled from a work, which could run at any point wrt. the runtime
resume handler. The work will also require a runtime PM reference,
syncing it with the resume handler.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009194358.1321200-4-imre.deak@intel.com
We need to be able to do both MMIO and DSB based pipe/plane
programming. To that end plumb the 'dsb' all way from the top
into the plane commit hooks.
The compiler appears smart enough to combine the branches from
all the back-to-back register writes into a single branch.
So the generated asm ends up looking more or less like this:
plane_hook()
{
if (dsb) {
intel_dsb_reg_write();
intel_dsb_reg_write();
...
} else {
intel_de_write_fw();
intel_de_write_fw();
...
}
}
which seems like a reasonably efficient way to do this.
An alternative I was also considering is some kind of closure
(register write function + display vs. dsb pointer passed to it).
That does result is smaller code as there are no branches anymore,
but having each register access go via function pointer sounds
less efficient.
Not that I actually measured the overhead of either approach yet.
Also the reg_rw tracepoint seems to be making a huge mess of the
generated code for the mmio path. And additionally there's some
kind of IS_GSI_REG() hack in __raw_uncore_read() which ends up
generating a pointless branch for every mmio register access.
So looks like there might be quite a bit of room for improvement
in the mmio path still.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-12-ville.syrjala@linux.intel.com
Add struct i915_irq_regs to hold IMR/IER/IIR register offsets to pass to
gen3_irq_reset() and gen3_irq_init(). This helps in grouping the
registers and further cleanup.
Note: gen3_irq_reset() and gen3_irq_init() really did have the
IMR/IER/IIR parameters in different order.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002102645.136155-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
IRQ registers have a well-defined scope and make sense to collect in a
dedicated header file. This also reduces confusion about the GT IRQ
registers --- even though those registers relate to the GTs, they
actually live outside the GT (in the sgunit) and thus do not need to
worry about GT-specific register concepts like forcewake, steering, etc.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923214514.2031410-2-matthew.d.roper@intel.com
intel_fb_obj() returns struct drm_i915_gem_object, which is not right
for xe, and only works because xe defines
-Ddrm_i915_gem_object=xe_bo. Switch to intel_fb_bo() and convert to
struct xe_bo from there.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39f3d52cf156aecc4b2ed5cf1c9342b1c15143b4.1726589119.git.jani.nikula@intel.com
Prefer the driver agnostic struct drm_gem_object over i915 specific
struct drm_i915_gem_object.
The xe specific intel_fb_bo.h becomes redundant. Remove it, and rely on
the common header in i915 display.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0efbc9ae2dbe157f92fa71d423ed37fd17346da5.1726589119.git.jani.nikula@intel.com
The display code needs to deal with gem objects, and mostly uses struct
drm_i915_gem_object. That's not great, because for xe we need to
redefine it struct xe_bo during build.
Start a common interface using struct drm_gem_object, with separate
implementations for i915 and xe. For starters, convert i9xx_wm.c to use
it.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df6867523a0b5fdd4eb63f657f545603ae6f6e0b.1726589119.git.jani.nikula@intel.com
Move to using intel_display wherever possible in intel_hdcp.c
as a part of code refactor.
--v2
-Move intel_display to the first line wherever possible [Jani]
-use the closest reference when using to_intel_display [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911090540.643155-2-suraj.kandpal@intel.com
The system is turning off, and we should probably put the device
in a safe power state. We don't need to evict VRAM or suspend running
jobs to a safe state, as the device is rebooted anyway.
This does not imply the system is necessarily reset, as we can
kexec into a new kernel. Without shutting down, things like
USB Type-C may mysteriously start failing.
References: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3500
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Add !xe_driver_flr_disabled assert]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905150052.174895-4-maarten.lankhorst@linux.intel.com
The previous change ensures that pm_suspend is only called when
suspending or resuming. This ensures no further bugs like those
in the previous commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905150052.174895-3-maarten.lankhorst@linux.intel.com
Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The most recent merge commits introduced some fails to drm/drm-next,
I've noticed these when looking at the xe patches.
Solve it!
Fixes: 8bdb468dd7 ("Merge tag 'drm-xe-next-2024-08-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[sima: add fixes line, and drop 3rd hunk because that's just a bugfix,
not mismerge, which should go in seperately with proper fixes line and
review/testing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902112002.489225-1-maarten.lankhorst@linux.intel.com
