Add a list of possible encoders to the connector configuration and
helpers to attach and detach them.
Now that the default configuration has its connector and encoder
correctly, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-15-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a list of possible CRTCs to the encoder configuration and helpers to
attach and detach them.
Now that the default configuration has its encoder and CRTC correctly
attached, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-13-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a list of possible CRTCs to the plane configuration and helpers to
attach, detach and get the primary and cursor planes attached to a CRTC.
Now that the default configuration has its planes and CRTC correctly
attached, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-11-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a list of planes to vkms_config and create as many planes as
configured during output initialization.
For backwards compatibility, add one primary plane and, if configured,
one cursor plane and NUM_OVERLAY_PLANES planes to the default
configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-9-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
As the configuration will be used by userspace, add a validator to avoid
creating a broken DRM device.
For the moment, the function always returns true, but rules will be
added in future patches.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-8-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Creating a new vkms_config structure will be more complex once we
start adding more options.
Extract the vkms_config structure to its own header and source files
and add functions to create and delete a vkms_config and to initialize
debugfs.
Refactor, no functional changes.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-5-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Up until now, the logic to manage connectors was in vkms_output.c.
Since more options will be added to connectors in the future, extract
the code to its own file.
Refactor, no functional changes.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-2-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
A specific allocation for the CRTC is not strictly necessary at this
point, but in order to implement dynamic configuration of VKMS (configFS),
it will be easier to have one allocation per CRTC.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-3-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
A specific allocation for the encoder is not strictly necessary at this
point, but in order to implement dynamic configuration of VKMS (configFS),
it will be easier to have one allocation per encoder.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-2-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
A specific allocation for the connector is not strictly necessary
at this point, but in order to implement dynamic configuration of
VKMS (configFS), it will be easier to have one allocation per
connector.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-1-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current VKMS driver uses non-managed function to create
writeback connectors. It is not an issue yet, but in order
to support multiple devices easily, convert this code to
use drm and device managed helpers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-8-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current VKMS driver uses non-managed function to create encoders. It
is not an issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-2-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current VKMS driver uses non-managed function to create connectors. It
is not an issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-1-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
VKMS currently supports only one CRTC, so it make no sense to have this
index configurable. To avoid issues, replace this hardcoded index by
drm_crtc_mask when applicable.
There is no need to manually set a crtc mask on primary and cursor plane
as it is automatically set by drmm_crtc_alloc_with_planes.
In addition, this will remove the use of an uninitialized structure in
vkms_add_overlay_plane. This currently works by chance because two things:
- vkms_plane_init always set a possible_crtcs value, so the problematic
branch is never used;
- drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
always have this id.
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-vkms-remove-index-v3-1-976321a3f801@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
CRTC creation uses drmm_crtc_init_with_planes(), which automatically
handles cleanup. However, an unnecessary call to drm_crtc_cleanup() is
still present in the vkms_output_init() error path.
Fixes: 99cc528ebe ("drm/vkms: Use drmm_crtc_init_with_planes()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031183835.3633-1-jose.exposito89@gmail.com
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Add documentation around vkms_output and its initialization.
Add some documentation on pixel conversion functions.
Update of outdated comments for pixel_write functions.
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-google-clarifications-v4-1-e43c1f2e3d87@bootlin.com
The driver doesn't use simple-KMS helpers to set a simple display pipeline
but only the drm_simple_encoder_init() function to initialize an encoder.
That helper is just a wrapper of drm_encoder_init(), but passing a struct
drm_encoder_funcs that sets the .destroy handler to drm_encoder_cleanup().
Since the <drm/drm_simple_kms_helper.h> header is only included for this
helper and because the connector is initialized with drm_connector_init()
as well, do the same for the encoder and drop the header include.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406110235.3092055-3-javierm@redhat.com
This helper is just a wrapper that calls drm_connector_cleanup(), there's
no need to have another level of indirection.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406110235.3092055-2-javierm@redhat.com
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Add support to overlay plane, in addition to primary and cursor
planes. In this approach, the plane composition still requires an
active primary plane and planes are composed associatively in the
order: (primary <- overlay) <- cursor
It enables to run the following IGT tests successfully:
- kms_plane_cursor:
- pipe-A-[overlay, primary, viewport]-size-[64, 128, 256]
- kms_atomic:
- plane-overlay-legacy
and preserves the successful execution of kms_cursor_crc,
kms_writeback and kms_flip
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/8261bf93d8a0e3ffaf81d8e7c9b3e9c229116be3.1619250933.git.melissa.srw@gmail.com
Currently, data for the device instance is held by vkms_device.
Add a separate type, vkms_config to contain configuration details
for the device and various modes to be later used by configfs.
This config data stays constant once the device is created.
Accordingly, add vkms_create and vkms_destroy to initialize/destroy
device through configfs. Currently, they are being called from vkms_init
and vkms_exit, but will be evoked from configfs later on. When configfs
is added, device configuration will be tracked by configfs and only vkms
device lifetime will be handled by vkms_init and vkms_exit functions.
Modify usage of enable_cursor feature to reflect the changes in
relevant files.
Co-developed-by: Daniel Vetter <danvet.vetter@ffwl.ch>
Signed-off-by: Daniel Vetter <danvet.vetter@ffwl.ch>
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a090ad29b826185df30f80c66932dd2173d7b060.1610391685.git.sylphrenadin@gmail.com
This patch implements the necessary functions to add writeback support
for vkms. This feature is useful for testing compositors if you don't
have hardware with writeback support.
Change in V4 (Emil and Melissa):
- Move signal completion above drm_crtc_add_crc_entry()
- Make writeback always available
- Use appropriate namespace
- Drop fb check in vkms_wb_atomic_commit
- Make vkms_set_composer visible for writeback code
- Enable composer operation on prepare_job and disable it on cleanup_job
- Drop extra space at the end of the file
- Rebase
Change in V3 (Daniel):
- If writeback is enabled, compose everything into the writeback buffer
instead of CRC private buffer
- Guarantees that the CRC will match exactly what we have in the
writeback buffer.
Change in V2:
- Rework signal completion (Brian)
- Integrates writeback with active_planes (Daniel)
- Compose cursor (Daniel)
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-4-rodrigosiqueiramelo@gmail.com
The vkms driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-21-tzimmermann@suse.de
When vkms invoke drm_universal_plane_init(), it sets 0 for
possible_crtcs parameter which means that planes can't be attached to
any CRTC. It currently works due to some safeguard in the drm_crtc file;
however, it is possible to identify the problem by trying to append a
second connector. This patch fixes this issue by modifying
vkms_plane_init() to accept an index parameter which makes the code a
little bit more flexible and avoid set zero to possible_crtcs.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d67849c62a8d8ace1a0af455998b588798a4c45f.1561491964.git.rodrigosiqueiramelo@gmail.com
The function vkms_output_init() is invoked during the module
initialization, and it handles the creation/configuration of the vkms
essential elements (e.g., connectors, encoder, etc). Among the
initializations, this function tries to initialize a connector and
register it by calling drm_connector_register(). However, inside the
drm_connector_register(), at the beginning of this function there is the
following validation:
if (!connector->dev->registered)
return 0;
In this sense, invoke drm_connector_register() after initializing the
connector has no effect because the register field is false. The
connector register happens when drm_dev_register() is invoked; the same
issue exists with drm_connector_unregister(). Therefore, this commit
removes the unnecessary call to drm_connector_register() and
drm_connector_unregister().
Changes since v2:
* Remove unnecessary call to drm_connector_unregister()
* Remove unused label
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315161142.23gfu32lueyqrmyq@smtp.gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
This commit adds the essential infrastructure for around CRTCs which
is composed of: a new data struct for output data information, a
function for creating planes, and a simple encoder attached to the
connector. Finally, due to the introduction of a new initialization
function, connectors were moved from vkms_drv.c to vkms_display.c.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b6e27bc6a54f5cb340658fa5969f7b48fbfbf1b7.1526514457.git.rodrigosiqueiramelo@gmail.com
