Unpreparing and re-preparing a panel can be a really heavy
operation. Panels datasheets often specify something on the order of
500ms as the delay you should insert after turning off the panel
before turning it on again. In addition, turning on a panel can have
delays on the order of 100ms - 200ms before the panel will assert HPD
(AKA "panel ready"). The above means that we should avoid turning a
panel off if we're going to turn it on again shortly.
The above becomes a problem when we want to read the EDID of a
panel. The way that ordering works is that userspace wants to read the
EDID of the panel _before_ fully enabling it so that it can set the
initial mode correctly. However, we can't read the EDID until we power
it up. This leads to code that does this dance (like
ps8640_bridge_get_edid()):
1. When userspace requests EDID / the panel modes (through an ioctl),
we power on the panel just enough to read the EDID and then power
it off.
2. Userspace then turns the panel on.
There's likely not much time between step #1 and #2 and so we want to
avoid powering the panel off and on again between those two steps.
Let's use Runtime PM to help us. We'll move the existing prepare() and
unprepare() to be runtime resume() and runtime suspend(). Now when we
want to prepare() or unprepare() we just increment or decrement the
refcount. We'll default to a 1 second autosuspend delay which seems
sane given the typical delays we see for panels.
A few notes:
- It seems the existing unprepare() and prepare() are defined to be
no-ops if called extra times. We'll preserve that behavior but may
try to remove it in a future patch.
- This is a slight change in the ABI of simple panel. If something was
absolutely relying on the unprepare() to happen instantly that
simply won't be the case anymore. I'm not aware of anyone relying on
that behavior, but if there is someone then we'll need to figure out
how to enable (or disable) this new delayed behavior selectively.
- In order for this to work we now have a hard dependency on
"PM". From memory this is a legit thing to assume these days and we
don't have to find some fallback to keep working if someone wants to
build their system without "PM".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid
The panel driver is no longer using any OMAP specific APIs, so
let's move it into the generic panel directory.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-40-tomi.valkeinen@ti.com
This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
The init values was taken from the vendor source tree, comments were added to the
know values but most of the init table is undocumented.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
[narmstrong: call drm_panel_remove if mipi_dsi_attach fails]
Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-3-narmstrong@baylibre.com
Add support for the ShenZhen Asia Better Technology Ltd. Y030XX067A 3.0"
320x480 IPS panel.
This panel can be found in the YLM RG-280M, RG-300 and RG-99 handheld
gaming consoles. While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-5-paul@crapouillou.net
The OnePlus 6/T devices use different panels however they are
functionally identical with the only differences being the resolution.
The panels also don't seem to be used by any other devices, just combine
them into one driver.
The panels are: samsung,sofef00
and samsung,s6e3fc2x01
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech
This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com
Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.
Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.
During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.
With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org
This makes it possible to use the s6e63m0 panel with a
DSI host, such as in the Samsung GT-I8190 (Golden) mobile
phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
This panel can be accessed using both SPI and DSI.
To make it possible to probe and use the device also from
a DSI bus, first break out the SPI support to its own file.
Since all the panel driver does is write DCS commands to
the panel, we pass a DCS write function to probe()
from each subdriver.
We make the Kconfig entry for SPI mode default so all
current users will continue to work.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/384873/
This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.
This is just a basic file rename, with no code changes.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com
This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.
This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-2-konradybcio@gmail.com
The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.
They differ in their init sequence and mode details.
changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de
Panel driver for the KD35T133 display from Elida, used for example
in the rk3326-based Odroid Go Advance handheld.
changes in v3:
- add missing return value assignment (Francesco)
- re-sort header includes (Sam)
changes in v2:
- rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor
the underlying mipi_dsi_dcs_write (Robin)
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de
This adds a driver for panels based on the Novatek NT35510
display driver IC, such as the Hydis HVA40WV1 panel found
in the Samsung GT-S7710.
The NT35510 can be used with both internal and external
backlight (such as GPIO backlight) so we support both:
if no external backlight is found, we register a subdriver
for the internal backlight.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223121841.26836-3-linus.walleij@linaro.org
Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
The LTK500HD1829 is 5.5" DSI display.
v5:
- Fix some trivial checkpatch warnings while applying (sam)
changes in v4:
- drop error message if backlight not found, no other panel
does that and if needed it should live in drm_panel_of_backlight
changes in v3:
- drop one more overlooked panel->drm access
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-3-heiko@sntech.de
Base on the somewhat similar Rocktech driver but adapted for
panel-specific init of the XPP055C272.
changes in v5:
- drop error message when backlight not found, no other panel
does that and if needed it should live in drm_panel_of_backlight
changes in v4:
none
changes in v3:
- remove wrong negative sync flags from display-mode to fix a display
artifact of the output getting move a tiny bit to the right
changes in v2:
- move to drm-panel-internal backlight handling (Sam)
- adapt to changes that happened to drm_panel structs+functions (Sam)
- sort includes (Sam)
- drop unnecessary DRV_NAME constant (Sam)
- do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on
in panel prepare (not init_sequence) to keep symmetric (Sam)
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112907.30758-3-heiko@sntech.de
Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
V11:
- Use the backlight support in drm_panel to simplify the driver (Sam)
V10:
- Adjust init code, make the format more concise (Emil)
V9:
- kill off default_off_cmds (Emil)
- use mipi_dsi_dcs_set_display_{on,off} in their enable/disable
callbacks. (Emil)
- Adjusting the delay function (Emil)
V8:
- modify PARENTHESIS_ALIGNMENT format (Sam)
- use gpios are required API replace optional gpio API (Emil)
V7:
- Modify communication address
V6:
- Add the information of the reviewer
- Remove unnecessary delays, The udelay_range code gracefully returns
without hitting the scheduler on a delay of 0. (Derek)
- Merge the same data structures, like display_mode and off_cmds (Derek)
- Optimize the processing of results returned by
devm_gpiod_get_optional (Derek)
V5:
- Add the information of the reviewer (Sam)
- Delete unnecessary header files #include <linux/fb.h> (Sam)
- The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam)
- ADD static, set_gpios function is not used outside this module (Sam)
V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
the initialization command (Rock wang)
V3:
- Remove unnecessary delays in sending initialization commands (Jitao Shi)
V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)
V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
Signed-off-by: Jerry Han <jerry.han.hq@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock wang <rock_wang@himax.com.cn>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed boe_panel_get_modes + backlight]
Link: https://patchwork.freedesktop.org/patch/msgid/20191212115208.3878-1-jerry.han.hq@gmail.com
This panel is used on the OMAP3 Pandora.
The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver.
v2:
- fix checkpatch warnings
o (lcd == NULL) => (!lcd) (sam)
o alignment to open '(' (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-10-laurent.pinchart@ideasonboard.com
This panel is used on the OpenMoko Neo FreeRunner and Neo 1973.
The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver.
v2:
- fix checkpatch warnings:
o (lcd == NULL) => (!lcd) (sam)
o (1 << X) => BIT(X) (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-9-laurent.pinchart@ideasonboard.com
This panel is used on the Nokia N900.
The code is based on the omapdrm-specific panel-sony-acx565akm driver.
The hardware-related logic has been changed as little as possible to
avoid regressions as hardware availability is lacking to test the
changes. Follow-up patches should address the items listed in the TODO
list.
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-8-laurent.pinchart@ideasonboard.com
This panel is used on the TI SDP3430 board.
The code is based on the omapdrm-specific panel-sharp-ls037v7dw01
driver.
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
- drop __exit_p() from remove. It caused a build warning.
And no other panel drivers needs this (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-7-laurent.pinchart@ideasonboard.com
This panel is used on the Zoom2/3/3630 SDP boards.
The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-6-laurent.pinchart@ideasonboard.com
Add support for display panels built around the Novatek NT39016 display
controller, as found on e.g. the King Display KD035G6-54NT 24-bit
320x240 3.5" LCD panel which equips the GCW Zero open-source handheld
gaming console.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152555.23527-2-paul@crapouillou.net
Cross-subsystem Changes:
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
-----BEGIN PGP SIGNATURE-----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=2K7c
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.3, try #2:
UAPI Changes:
- Add HDR source metadata property.
- Make drm.h compile on GNU/kFreeBSD by including stdint.h
- Clarify how the userspace reviewer has to review new kernel UAPI.
- Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough.
Cross-subsystem Changes:
- video/hdmi: Add unpack function for DRM infoframes.
- Device tree bindings:
* Updating a property for Mali Midgard GPUs
* Updating a property for STM32 DSI panel
* Adding support for FriendlyELEC HD702E 800x1280 panel
* Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel
* Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.
* Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel
with resistive touch found on TI's AM335X-EVM.
* Adding support for EDT ETM0430G0DH6 480x272 panel.
- Add OSD101T2587-53TS driver with DT bindings.
- Add Samsung S6E63M0 panel driver with DT bindings.
- Add VXT VL050-8048NT-C01 800x480 panel with DT bindings.
- Dma-buf:
- Make mmap callback actually optional.
- Documentation updates.
- Fix debugfs refcount inbalance.
- Remove unused sync_dump function.
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Add support for HDR infoframes and related EDID parsing.
- Remove prime sg_table caching, now done inside dma-buf.
- Add shiny new drm_gem_vram helpers for simple VRAM drivers;
with some fixes to the new API on top.
- Small fix to job cleanup without timeout handler.
- Documentation fixes to drm_fourcc.
- Replace lookups of drm_format with struct drm_format_info;
remove functions that become obsolete by this conversion.
- Remove double include in bridge/panel.c and some drivers.
- Remove drmP.h include from drm/edid and drm/dp.
- Fix null pointer deref in drm_fb_helper_hotplug_event().
- Remove most members from drm_fb_helper_crtc, only mode_set is kept.
- Remove race of fb helpers with userspace; only restore mode
when userspace is not master.
- Move legacy setup from drm_file.c to drm_legacy_misc.c
- Rework scheduler job destruction.
- drm/bus was removed, remove from TODO.
- Add __drm_atomic_helper_crtc_reset() to subclass crtc_state,
and convert some drivers to use it (conversion is not complete yet).
- Bump vblank timeout wait to 100 ms for atomic.
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually.
- v3d: Small cleanups, adding support for compute shaders,
reservation/synchronization fixes and job management refactoring,
fixes MMU and debugfs.
- lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs.
- stm/ltdc: Assorted fixes and adding FB modifier support.
- amdgpu: Avoid hw reset if guilty job was already signaled.
- virtio: Add seqno to fences, add trace events, use correct flags for fence allocation.
- Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API.
- sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers.
- bochs: Small fix to use PTR_RET_OR_ZERO and driver unload.
- gma500: header fixes
- cirrus: Remove unused files.
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The panel is similar to OSD101T2045-53TS (which is handled by panel-simple)
with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL
message to be sent from the host to be operational and thus can not be
handled by panel-simple.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-5-peter.ujfalusi@ti.com
This patch adds Samsung S6E63M0 AMOLED LCD panel driver, connected over
spi. It's based on already removed, non-device-tree S6E63M0 driver and
panel-samsung-ld9040. It can be found for example in some of Samsung
Aries based phones.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222175153.20567-2-pawel.mikolaj.chmiel@gmail.com
Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI
DSI video mode panel.
The panel seems to use a Sitronix ST7703 look alike (most of the
commands look similar to the ST7703's data sheet but use a different
number of parameters). The initial version of the DSI init sequence
(including sleeps) were provided by the vendor. Sleeps were reduced
considerably though to speed up initialization.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a9ce687be283c66dfb26d1dfb52a7bf695090fa.1554114302.git.agx@sigxcpu.org
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.
v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
already had applied them one kernel release back in
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
- real range for usleep_range and
- poweroff ordering in kingdisplay_panel_prepare
- return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
- error handling for init dsi writes in init
- unconditionally remove the panel
- don't use drm_panel_detach
- a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.
Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com
The TPO (Toppoly) TPG110 is a pretty generic display driver
similar in vein to the Ilitek 93xx devices. It is not a panel
per se but a driver used with several low-cost noname panels.
This is used on the Nomadik NHK15 combined with a OSD
OSD057VA01CT display for WVGA 800x480.
The driver is pretty minimalistic right now but can be
extended to handle non-default polarities, gamma correction
etc.
The driver is based on the baked-in code in
drivers/video/fbdev/amba-clcd-nomadik.c which will be
decomissioned once this us upstream.
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111175406.27646-1-linus.walleij@linaro.org
Add support for Truly NT35597 panel driver used in MSM reference
platforms. This panel driver supports both single DSI and dual
DSI modes.
However, this patch series adds support only for dual DSI mode.
Changes in v10:
- None
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-1-git-send-email-abhinavk@codeaurora.org
The Samsung S6D16D0 is a simple comman mode only DSI display
that is used on the ST-Ericsson Ux500 reference design
TVK1281618 user interface board (UIB).
Cc: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org
This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel
is used with different LCDs (currently from 480x272 to 1280x800). A
small EEPROM chip is used for identification, which holds some factory
data and timing requirements.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com
Like many other panel drivers, this one fails to build when backlight
support is disabled:
drivers/gpu/drm/panel/panel-raydium-rm68200.o: In function `rm68200_probe':
panel-raydium-rm68200.c:(.text+0x14a): undefined reference to `devm_of_find_backlight'
This adds the appropriate dependency.
Note that while include/linux/backlight.h provides a stub inline when
backlight support is not enabled, this isn't enough to deal with the
case where backlight support is built as a module but the panel driver
is built-in, in which case linking will still fail as above.
One way to avoid this is to add a dependency such as this:
depends on BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=n
but that is rather complex and misses the point that the panel support
is mostly useless without backlight support.
Fixes: 2b7ed18bed ("drm/panel: Add support for Raydium RM68200 panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[treding@nvidia.com: clarify the need for the dependency]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180313210015.3344380-1-arnd@arndb.de
The ARM reference designs "Versatile AB" and "Versatile PB"
contain panel connectors with autodetection of the connected
panel type. This adds a small driver utilizing the MFD syscon
look-up to read the autodetection register and set up the
corresponding panel appropriately.
In the source file there is a bit of elaboration of the
panel types and interfaces on these boards.
This was tested with the PL111 DRM driver on the ARM Versatile
AB with the IB2 daughterboard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org
This adds support for the Ilitek ILI9322 QVGA (320x240)
TFT panel driver.
This panel driver supports serial or parallel RGB or
YUV input and also ITU-T BT.656 input streams.
The controller is combined with a physical panel and
configured through the device tree.
Cc: David Lechner <david@lechnology.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221234411.12156-1-linus.walleij@linaro.org
This driver communicates with the Atmel microcontroller for sequencing
the poweron of the TC358762 DSI-DPI bridge and controlling the
backlight PWM.
v2: Set the same default orientation as the closed source firmware
used, which is the best for viewing angle.
v3: Rewrite as an i2c client driver after bridge driver rejection.
v4: Finish probe without the DSI host, using the new delayed
registration, and attach to the host during mipi_dsi_driver probe.
v5: Rework to drop the "probe without DSI host" mode again, now that
vc4 will create the host early on.
v6: Drop unused brightness #define (noticed by Thierry)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-4-eric@anholt.net
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Add driver for Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480)
TFT with Touch-Panel.
Datasheet available at:
http://www.glyn.de/data/glyn/media/doc/43wvf1g-0.pdf
Seiko 43WVF1G panel has two power supplies: avdd and dvdd and they
require a specific power on/down sequence.
For this reason the simple panel driver cannot be used to drive this
panel, so create a new one heavily based on simple panel.
Based on initial patch submission from Breno Lima.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500567179-6967-1-git-send-email-marco.franchi@nxp.com
This patch adds Orise Tech OTM8009A 3.97" 480x800 TFT LCD
panel driver (MIPI-DSI video mode). The panel backlight is
managed through the DSI link. This panel driver is used in
several STM32 boards.
Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500297593-30633-4-git-send-email-philippe.cornu@st.com
This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver
which uses MIPI DSI bus to communicate with panel. The panel has
320×320 resolution in 1.63" physical panel. This panel is used in
Samsung Galaxy Gear 2.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-3-git-send-email-hoegeun.kwon@samsung.com
Without the dependency, we run into a link error:
drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe':
panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node'
Fixes: 7142afb3a1 ("drm/panel: Add driver for sitronix ST7789V LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de
The new S6E3HA2 driver fails to link when backlight is disabled:
ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
This adds a Kconfig dependency like we have it for some other panel drivers.
Fixes: ed29f9426d ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de
This contains two new drivers for a Sitronix and a Samsung panel as well
as two new panels supported by the panel-simple driver.
-----BEGIN PGP SIGNATURE-----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=zAVl
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.12-rc1
This contains two new drivers for a Sitronix and a Samsung panel as well
as two new panels supported by the panel-simple driver.
* tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: simple: Add support for Winstar WF35LTIACD
devicetree: add vendor prefix for Winstar Display Corp.
drm/panel: Add driver for sitronix ST7789V LCD controller
dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel
drm/panel: Add support for S6E3HA2 panel driver on TM2 board
dt-bindings: Add support for Samsung s6e3ha2 panel binding
drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H
dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
The Sitronix ST7789v controller is used to drive 240x320 LCD panels through
various interfaces, including SPI and RGB/Parallel.
The current driver is configuring it for the latter. Support for tinyDRM
can always be added later.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
driver. This panel has 1440x2560 resolution in 5.7-inch physical
panel in the TM2 device.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the JDI LT070ME05000 WUXGA DSI panel used in
Nexus 7 2013 devices.
Programming sequence for the panel is was originally found in the
android-msm-flo-3.4-lollipop-release branch from:
https://android.googlesource.com/kernel/msm.git
And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi
file in:
git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Sharp LS043T1LE01 is a 4.3", 540x960 TFT-LCD panel connected using
two DSI lanes. It is for example found on the Qualcomm Snapdragon 800
Dragonboard (APQ8074).
Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds support for the Panasonic panel found in some Xperia Z2
tablets.
Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LG4573 is used on the LG LCD LB043WV2-SD01, an industrial 4.3" TFT
panel with SPI control interface.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The simple panel driver's ->get_modes() implementation calculates the
display mode list from the typical timings and the ->get_timings()
implementation returns the timings to the connected encoder for mode
validation and fixup.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[treding@nvidia.com: select VIDEOMODE_HELPERS]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The simple panel code uses the backlight interface to
find a device, which fails when backlight is disabled:
drivers/built-in.o: In function `panel_simple_platform_probe':
:(.text+0xd3c48): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The sharp panel code uses the backlight interface to
find a device, which fails when backlight is disabled:
drivers/built-in.o: In function `sharp_panel_probe':
:(.text+0x5ceac): undefined reference to `of_find_backlight_by_node'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This panel requires dual-channel mode. The device accepts command-mode
data on 8 lanes and will therefore need a dual-channel DSI controller.
The two interfaces that make up this device need to be instantiated in
the controllers that gang up to provide the dual-channel DSI host.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than DRM_PANEL_LD9040 selecting SPI, which then results in an
increase in the probability of Kconf reporting circular dependencies
(we're one "select" away from that right now), make this depend on
SPI instead. This is akin to having some driver select DRM.
Having some drivers depend on a subsystem, and other drivers select a
subsystem is a recipe for circular dependencies, and there's really no
need for it.
The potential circular dependency (which can be caused today by the
addition of selecting DRM_PANEL from DRM_IMX_LDB) is:
symbol DMADEVICES is selected by SAMSUNG_DMADEV
symbol SAMSUNG_DMADEV is selected by S3C64XX_PL080
symbol S3C64XX_PL080 is selected by SPI_S3C64XX
symbol SPI_S3C64XX depends on SPI
symbol SPI is selected by DRM_PANEL_LD9040
symbol DRM_PANEL_LD9040 depends on DRM_PANEL
symbol DRM_PANEL is selected by DRM_IMX_LDB
symbol DRM_IMX_LDB depends on MFD_SYSCON
symbol MFD_SYSCON is selected by POWER_RESET_KEYSTONE
symbol POWER_RESET_KEYSTONE depends on POWER_SUPPLY
symbol POWER_SUPPLY is selected by HID_SONY
symbol HID_SONY depends on NEW_LEDS
symbol NEW_LEDS is selected by BACKLIGHT_ADP8860
symbol BACKLIGHT_ADP8860 depends on BACKLIGHT_CLASS_DEVICE
symbol BACKLIGHT_CLASS_DEVICE is selected by FB_MX3
symbol FB_MX3 depends on MX3_IPU
symbol MX3_IPU depends on DMADEVICES
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
DRM_PANEL_LD9040 and DRM_PANEL_S6E8AA0 both explicitly depended on
DRM_PANEL && DRM, whereas DRM_PANEL_SIMPLE relies upon the dependency
on the menu.
We do not need to use explicit dependencies if we make the menu depend
on DRM_PANEL && DRM - this will implicitly make each entry in the menu
depend on DRM_PANEL && DRM without this needing to be explicitly stated
against every entry.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The patch adds MIPI-DSI based S6E8AA0 AMOLED LCD panel driver.
Driver uses mipi_dsi bus to communicate with panel and exposes drm_panel
interface.
v2
- added bus error handling,
- set maxmimum DSI packet size on init,
- removed unsupported brightness drm_panel callbacks,
- minor improvements
v3
- switched to gpiod framework,
- minor fixes in error handling
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch adds LD9040 parallel RGB panel driver with SPI control interface.
The driver uses drm_panel framework.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add a driver for simple panels. Such panels can have a regulator that
provides the supply voltage and a separate GPIO to enable the panel.
Optionally the panels can have a backlight associated with them so it
can be enabled or disabled according to the panel's power management
mode.
Support is added for two panels: An AU Optronics 10.1" WSVGA and a
Chunghwa Picture Tubes 10.1" WXGA panel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a very simple framework to register and lookup panels. Panel drivers
can initialize a DRM panel and register it with the framework, allowing
them to be retrieved and used by display drivers. Currently only support
for DPMS and obtaining panel modes is provided. However it should be
sufficient to enable a large number of panels. The framework should also
be easily extensible to support more sophisticated kinds of panels such
as DSI.
The framework hasn't been tied into the DRM core, even though it should
be easily possible to do so if that's what we want. In the current
implementation, display drivers can simple make use of it to retrieve a
panel, obtain its modes and control its DPMS mode.
Note that this is currently only tested on systems that boot from a
device tree. No glue code has been written yet for systems that use
platform data, but it should be easy to add.
Signed-off-by: Thierry Reding <treding@nvidia.com>
