Reserve CDM blocks for DP if the mode format is YUV420. Currently this
reservation only works for writeback and DP if the format is YUV420. But
this can be easily extented to other YUV formats for DP.
Changes in v2:
- Minor code simplification
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579630/
Link: https://lore.kernel.org/r/20240222194025.25329-19-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Adjust the encoder timing engine setup programming in the case of video
mode for YUV420 over DP to accommodate CDM.
Changes in v3:
- Move drm_display_mode's hskew division to another patch
- Minor cleanup
Changes in v2:
- Move timing engine programming to this patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579634/
Link: https://lore.kernel.org/r/20240222194025.25329-18-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Adjust the encoder format programming in the case of video mode for DP
to accommodate CDM related changes.
Changes in v4:
- Remove hw_cdm check in dpu_encoder_needs_periph_flush()
- Remove hw_cdm check when getting the fmt_fourcc in
dpu_encoder_phys_vid_enable()
Changes in v2:
- Move timing engine programming to a separate patch from this
one
- Move update_pending_flush_periph() invocation completely to
this patch
- Change the logic of dpu_encoder_get_drm_fmt() so that it only
calls drm_mode_is_420_only() instead of doing additional
unnecessary checks
- Create new functions msm_dp_needs_periph_flush() and it's
supporting function dpu_encoder_needs_periph_flush() to check
if the mode is YUV420 and VSC SDP is enabled before doing a
peripheral flush
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579641/
Link: https://lore.kernel.org/r/20240222194025.25329-17-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Widebus enablement is decided by the interfaces based on their specific
checks and that already happens with DSI/DP specific helpers. Let's
invoke these helpers from dpu_encoder_is_widebus_enabled() to make it
cleaner overall.
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579632/
Link: https://lore.kernel.org/r/20240222194025.25329-10-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move dpu_encoder_helper_phys_setup_cdm to dpu_encoder in preparation for
implementing YUV420 over DP, which requires CDM compatibility.
Changes in v2:
- Slightly change the wording of the commit text to make clear
that YUV over DP requires CDM
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579611/
Link: https://lore.kernel.org/r/20240222194025.25329-6-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Generalize dpu_encoder_helper_phys_setup_cdm to be compatible with DP.
Changes in v2:
- Minor formatting changes
- Move the modification of the dimensions for CDM setup to a new
patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579609/
Link: https://lore.kernel.org/r/20240222194025.25329-5-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Modify the output width and height parameters of hw_cdm to utilize the
physical encoder's data instead of obtaining the information from the
framebuffer. CDM is to be set up to utilize the actual output data since
at CDM setup, there is no difference between the two sources.
Changes in v2:
- Move the modification of the dimensions for CDM setup to this
new patch
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579607/
Link: https://lore.kernel.org/r/20240222194025.25329-4-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Setting up the timing engine when the physical encoder has a split role
neglects dividing the drm_display_mode's hskew parameter. Let's fix this
since this must also be done in preparation for implementing YUV420 over
DP.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579605/
Link: https://lore.kernel.org/r/20240222194025.25329-3-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
CDM block supports formats other than H1V2 for DP. Since we are now
adding support for CDM over DP, relax the checks to allow all other
formats for DP other than H1V2.
Changes in v2:
- Add fixes tag
- Move patch to top of series
Fixes: 0afac0ba60 ("drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block")
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579606/
Link: https://lore.kernel.org/r/20240222194025.25329-2-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bring in hardware support for the SDM660 and SDM630 platforms, which
belong to the same DPU generation as MSM8998.
Note, by default these platforms are still handled by the MDP5 driver
unless the `msm.prefer_mdp5=false' parameter is provided.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577507/
Link: https://lore.kernel.org/r/20240208-fd-migrate-mdp5-v4-4-945d08ef3fa8@linaro.org
For some of the platforms (e.g. SDM660, SDM630, MSM8996, etc.) it is
possible to support this platform via the DPU driver (e.g. to provide
support for DP, multirect, etc). Add a modparam to be able to switch
between these two drivers.
All platforms supported by both drivers are by default handled by the
MDP5 driver. To let them be handled by the DPU driver pass the
`msm.prefer_mdp5=false` kernel param.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577504/
Link: https://lore.kernel.org/r/20240208-fd-migrate-mdp5-v4-3-945d08ef3fa8@linaro.org
The atomic_mode_set() callback only sets the phys_enc's IRQ data. As the
INTF and WB are statically allocated to each encoder/phys_enc, drop the
atomic_mode_set callback and set the IRQs during encoder init.
For the CMD panel usecase some of IRQ indexes depend on the selected
resources. Move setting them to the irq_enable() callback.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577529/
Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-3-caf5dcd125c0@linaro.org
When the topology calls for two interfaces on the current fixed topology
of 2 DSC blocks, or uses 1 DSC block for a single interface (e.g. SC7280
with only one DSC block), there should be no merging of DSC output.
This is already represented by the return value of
dpu_encoder_use_dsc_merge(), but not yet used to correctly configure
this flag.
Fixes: 58dca98107 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577067/
Link: https://lore.kernel.org/r/20240204-dpu-dsc-multiplex-v1-1-080963233c52@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement
of widebus but this is incorrect because we should be enabling
this bit independent of widebus except for cases where compression
is enabled in one pixel per clock mode.
Fix this by making the condition checks more explicit and enabling
INTF_CFG2_DATA_HCTL_EN for all other cases when supported by DPU.
Fixes: 3309a75639 ("drm/msm/dpu: revise timing engine programming to support widebus feature")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/576722/
Link: https://lore.kernel.org/r/20240201004737.2478-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder.
However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd
index and another one has an even index. Each encoder can work
independently. But only two DSC encoders from same DCE can be paired
to work together to support DSC merge mode at DSC V1.2. For DSC V1.1
two consecutive DSC encoders (start with even index) have to be paired
to support DSC merge mode. In addition, the DSC with even index have
to be mapped to even PINGPONG index and DSC with odd index have to be
mapped to odd PINGPONG index at its data path in regardless of DSC
V1.1 or V1.2. This patch improves DSC allocation mechanism with
consideration of those factors.
Changes in V6:
-- rename _dpu_rm_reserve_dsc_single to _dpu_rm_dsc_alloc
-- rename _dpu_rm_reserve_dsc_pair to _dpu_rm_dsc_alloc_pair
-- pass global_state to _dpu_rm_pingpong_next_index()
-- remove pp_max
-- fix for loop condition check at _dpu_rm_dsc_alloc()
Changes in V5:
-- delete dsc_id[]
-- update to global_state->dsc_to_enc_id[] directly
-- replace ndx with idx
-- fix indentation at function declaration
-- only one for loop at _dpu_rm_reserve_dsc_single()
Changes in V4:
-- rework commit message
-- use reserved_by_other()
-- add _dpu_rm_pingpong_next_index()
-- revise _dpu_rm_pingpong_dsc_check()
Changes in V3:
-- add dpu_rm_pingpong_dsc_check()
-- for pair allocation use i += 2 at for loop
Changes in V2:
-- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and
_dpu_rm_reserve_dsc_pair()
Fixes: f2803ee91a ("drm/msm/disp/dpu1: Add DSC support in RM")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/572144/
Link: https://lore.kernel.org/r/1702580172-30606-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The commit 8b45a26f2b ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: ae4d721ce1 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/574878/
Link: https://lore.kernel.org/r/20240117194109.21609-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Drop the enable and frame_count parameters from dpu_hw_setup_misr() as they
are always set to the same values.
In addition, replace MISR_FRAME_COUNT_MASK with MISR_FRAME_COUNT as
frame_count is always set to the same value.
Fixes: 7b37523fb1 ("drm/msm/dpu: Move MISR methods to dpu_hw_util")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/572009/
Link: https://lore.kernel.org/r/20231213-encoder-fixup-v4-2-6da6cd1bf118@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move CSC tables out of the header file to fix following kind of warnings:
In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h:8,
from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:5:
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:54:33: warning: ‘dpu_csc10_rgb2yuv_601l’ defined but not used [-Wunused-const-variable=]
54 | static const struct dpu_csc_cfg dpu_csc10_rgb2yuv_601l = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:39:33: warning: ‘dpu_csc10_YUV2RGB_601L’ defined but not used [-Wunused-const-variable=]
39 | static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:24:33: warning: ‘dpu_csc_YUV2RGB_601L’ defined but not used [-Wunused-const-variable=]
24 | static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/571869/
Link: https://lore.kernel.org/r/20231213005728.53060-1-dmitry.baryshkov@linaro.org
Add a mutex lock to control vblank irq to synchronize vblank
enable/disable operations happening from different threads to prevent
race conditions while registering/unregistering the vblank irq callback.
v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a
parameter of dpu_encoder_phys.
-Switch from atomic refcnt to a simple int counter as mutex has
now been added
v3: Mistakenly did not change wording in last version. It is done now.
v2: Slightly changed wording of commit message
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571854/
Link: https://lore.kernel.org/r/20231212231101.9240-2-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Lets rename the existing wb2_formats array wb2_formats_rgb to indicate
that it has only RGB formats and can be used on any chipset having a WB
block.
Introduce a new wb2_formats_rgb_yuv array to the catalog to
indicate support for YUV formats to writeback in addition to RGB.
Chipsets which have support for CDM block will use the newly added
wb2_formats_rgb_yuv array.
changes in v3:
- change type of wb2_formats_rgb/wb2_formats_rgb_yuv to u32
to fix checkpatch warnings
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571837/
Link: https://lore.kernel.org/r/20231212205254.12422-15-quic_abhinavk@quicinc.com
[DB: fixed newer catalog entries]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reserve CDM blocks for writeback if the format of the output fb
is YUV. At the moment, the reservation is done only for writeback
but can easily be extended by relaxing the checks once other
interfaces are ready to output YUV.
changes in v3:
- squash CDM disable during encoder cleanup into this change
changes in v2:
- use needs_cdm from topology struct
- drop fb related checks from atomic_mode_set()
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571838/
Link: https://lore.kernel.org/r/20231212205254.12422-14-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To setup and enable CDM block for the writeback pipeline, lets
add the pieces together to set the active bits and the flush
bits for the CDM block.
changes in v2:
- passed the cdm idx to update_pending_flush_cdm()
(have retained the R-b as its a minor change)
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571831/
Link: https://lore.kernel.org/r/20231212205254.12422-13-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add an API dpu_encoder_helper_phys_setup_cdm() which can be used by
the writeback encoder to setup the CDM block.
Currently, this is defined and used within the writeback's physical
encoder layer however, the function can be modified to be used to setup
the CDM block even for non-writeback interfaces.
Until those modifications are planned and made, keep it local to
writeback.
changes in v3:
- call bind_pingpong_blk() directly as disable() is dropped
- add dpu_csc10_rgb2yuv_601l to dpu_hw_util.h and use it
- fix kbot error on the function doc
- document that dpu_encoder_helper_phys_setup_cdm() doesn't handle
DPU_CHROMA_H1V2
changes in v2:
- add the RGB2YUV CSC matrix to dpu util as needed by CDM
- use dpu_hw_get_csc_cfg() to get and program CSC
- drop usage of setup_csc_data() and setup_cdwn() cdm ops
as they both have been merged into enable()
- drop reduntant hw_cdm and hw_pp checks
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312102149.qmbCdsg2-lkp@intel.com/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571833/
Link: https://lore.kernel.org/r/20231212205254.12422-12-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
CDM block will need its own logic to program the flush and active
bits in the dpu_hw_ctl layer.
Make necessary changes in dpu_hw_ctl to support CDM programming.
changes in v3:
- drop unused cdm_active as reported by kbot
- retained the R-b as its a trivial change
changes in v2:
- remove unused empty line
- pass in cdm_num to update_pending_flush_cdm()
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312102047.S0I69pCs-lkp@intel.com/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571829/
Link: https://lore.kernel.org/r/20231212205254.12422-11-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Even though there is usually only one CDM block, it can be
used by either HDMI, DisplayPort OR Writeback interfaces.
Hence its allocation needs to be tracked properly by the
resource manager to ensure appropriate availability of the
block.
changes in v2:
- move needs_cdm to topology struct
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571827/
Link: https://lore.kernel.org/r/20231212205254.12422-10-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add the RM APIs necessary to initialize and allocate CDM
blocks to be used by the rest of the DPU pipeline.
changes in v2:
- treat cdm_init() failure as fatal
- fixed the commit text
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571822/
Link: https://lore.kernel.org/r/20231212205254.12422-9-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
CDM block comes with its own set of registers and operations
which can be done. In-line with other hardware blocks, this
change adds the dpu_hw_cdm abstraction for the CDM block.
changes in v4:
- used FIELD_PREP() for dpu_hw_cdm_setup_cdwn() operations
- change to lowercase hex in dpu_hw_cdm_bind_pingpong_blk()
- move disable assignment inside else in dpu_hw_cdm_bind_pingpong_blk()
changes in v3:
- fix commit text from sub-blk to blk for CDM
- fix kbot issue for missing static for dpu_hw_cdm_enable()
- fix kbot issue for incorrect documentation style
- add more documentation for enums and struct in dpu_hw_cdm.h
- drop "enable" parameter from bind_pingpong_blk() as we can
just use PINGPONG_NONE for disable cases
- drop unnecessary bit operation for zero value of cdm_cfg
changes in v2:
- replace bit magic with relevant defines
- use drmm_kzalloc instead of kzalloc/free
- some formatting fixes
- inline _setup_cdm_ops()
- protect bind_pingpong_blk with core_rev check
- drop setup_csc_data() and setup_cdwn() ops as they
are merged into enable()
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312101815.B3ZH7Pfy-lkp@intel.com/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571824/
Link: https://lore.kernel.org/r/20231212205254.12422-8-quic_abhinavk@quicinc.com
[DB: Added linux/bitfield.h inclusion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add CDM blocks to the sc7280 dpu_hw_catalog to support
YUV format output from writeback block.
changes in v3:
- change the comment from sub-blk to clk for CDM
changes in v2:
- remove explicit zero assignment for features
- move sc7280_cdm to dpu_hw_catalog from the sc7280
catalog file as its definition can be re-used
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571818/
Link: https://lore.kernel.org/r/20231212205254.12422-6-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since the type and usage of CSC matrices is spanning across DPU
lets introduce a helper to the dpu_hw_util to return the CSC
corresponding to the request type. This will help to add more
supported CSC types such as the RGB to YUV one which is used in
the case of CDM.
changes in v3:
- drop the extra wrapper and export the matrices directly
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571816/
Link: https://lore.kernel.org/r/20231212205254.12422-5-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For YUV cases, setting the required format bits was missed
out in the register programming. Lets fix it now in preparation
of adding YUV formats support for writeback.
changes in v2:
- dropped the fixes tag as its not a fix but adding
new functionality
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571814/
Link: https://lore.kernel.org/r/20231212205254.12422-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_encoder_phys_wb_setup_cdp() is not programming the chroma down
prefetch block. Its setting up the display ctl path for writeback.
Hence rename it to dpu_encoder_phys_wb_setup_ctl() to match what its
actually doing.
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571812/
Link: https://lore.kernel.org/r/20231212205254.12422-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In preparation for adding more formats to dpu writeback add
format validation to it to fail any unsupported formats.
changes in v4:
- change the failure message of the API
drm_atomic_helper_check_wb_connector_state() to a generic
one in case it checks more errors later and moreoever it
already has debug message to indicate its failure
- change the corresponding DPU_ERROR to DPU_DEBUG in-line with
other atomic_check failure messages
changes in v3:
- rebase on top of msm-next
- replace drm_atomic_helper_check_wb_encoder_state() with
drm_atomic_helper_check_wb_connector_state() due to the
rebase
changes in v2:
- correct some grammar in the commit text
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571811/
Link: https://lore.kernel.org/r/20231212205254.12422-2-quic_abhinavk@quicinc.com
[DB: removed extra debug message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The drmm handler will perform drm_encoder_cleanup() for us. Moreover if
we call drm_encoder_cleanup() manually, the drmm_encoder_alloc_release()
will spawn warnings at drivers/gpu/drm/drm_encoder.c:214. Drop these
extra drm_encoder_cleanup() calls.
Fixes: cd42c56d9c ("drm/msm/dpu: use drmm-managed allocation for dpu_encoder_virt")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> #sm8250 CI
Patchwork: https://patchwork.freedesktop.org/patch/571562/
Link: https://lore.kernel.org/r/20231211145440.3647001-1-dmitry.baryshkov@linaro.org
On sc7280 there are two clk bits for WB2: vbif_cli and clk_ctrl. While
programming the VBIF params of WB, the driver should be toggling the
former bit, while the sc7180_mdp, sc7280_mdp and sm8250_mdp structs
list the latter one.
Correct that to ensure proper programming sequence for WB2 on these
platforms.
Fixes: 255f056181 ("drm/msm/dpu: sc7180: add missing WB2 clock control")
Fixes: 3ce1663805 ("drm/msm/dpu: add writeback support for sc7280")
Fixes: 53324b99bd ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Paloma Arellano <quic_parellan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570185/
Link: https://lore.kernel.org/r/20231203002437.1291595-1-dmitry.baryshkov@linaro.org
It is incorrect to use devm-managed memory allocations for DRM data
structures exposed to userspace. They should use drmm_ allocations.
Change struct dpu_encoder allocation to use drmm_encoder_alloc(). This
removes the need to perform any actions on encoder destruction.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570053/
Link: https://lore.kernel.org/r/20231201211845.1026967-14-dmitry.baryshkov@linaro.org
Three different features, DPU_SSPP_SCALER_QSEED3, QSEED3LITE and QSEED4
are all related to different versions of the same HW scaling block.
Corresponding driver parts use scaler_blk.version to identify the
correct way to program the hardware. In order to simplify the driver
codepath, merge these three feature bits into QSEED3_COMPATIBLE bin.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570114/
Link: https://lore.kernel.org/r/20231201234234.2065610-10-dmitry.baryshkov@linaro.org
In order to check whether the SSPP block has scaler and CSC subblocks
the funcion dpu_plane_atomic_check_pipe() uses macros which enumerate
all possible scaler and CSC features. Replace those checks with the
scaler and CSC subblock length checks in order to be able to drop those
two macros.
Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570113/
Link: https://lore.kernel.org/r/20231201234234.2065610-9-dmitry.baryshkov@linaro.org
The SSPP scaler subblk is responsible for reporting its version (via the
.id field, feature bits on the parent SSPP block, and since recently
also from reading a register to supersede a read-but-unset version field
in the catalog), leaving this global qseed_type field logically unused.
Remove this dead code to lighten the catalog and bringup-overhead.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570109/
Link: https://lore.kernel.org/r/20231201234234.2065610-4-dmitry.baryshkov@linaro.org
This pointer callback is never used and should be removed.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[DB: dropped the helpers completely, which are unused now]
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570096/
Link: https://lore.kernel.org/r/20231201234234.2065610-3-dmitry.baryshkov@linaro.org
The function _dpu_hw_sspp_setup_scaler3() passes and
dpu_hw_setup_scaler3() uses scaler_blk.version to determine in which way
the scaler (QSEED3) block should be programmed. However up to now we
were not setting this field. Set it now, splitting the vig_sblk data
which has different version fields.
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: 9b6f4fedaa ("drm/msm/dpu: Add SM6125 support")
Fixes: 27f0df03f3 ("drm/msm/dpu: Add SM6375 support")
Fixes: 3186acba5c ("drm/msm/dpu: Add SM6350 support")
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Fixes: 3581b7062c ("drm/msm/disp/dpu1: add support for display on SM6115")
Fixes: dabfdd89ea ("drm/msm/disp/dpu1: add inline rotation support for sc7280")
Fixes: f3af2d6ee9 ("drm/msm/dpu: Add SC8180x to hw catalog")
Fixes: 94391a14fc ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Fixes: af776a3e1c ("drm/msm/dpu: add SM8250 to hw catalog")
Fixes: 386fced3f7 ("drm/msm/dpu: add SM8150 to hw catalog")
Fixes: b75ab05a34 ("msm:disp:dpu1: add scaler support on SC7180 display")
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570098/
Link: https://lore.kernel.org/r/20231201234234.2065610-2-dmitry.baryshkov@linaro.org
Similar to SC8280XP, the misconfigured SAFE logic causes rather
significant delays in __arm_smmu_tlb_sync(), resulting in poor
performance for things such as USB.
Introduce appropriate SAFE values for SC8180X to correct this.
Fixes: f3af2d6ee9 ("drm/msm/dpu: Add SC8180x to hw catalog")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reported-by: Anton Bambura <jenneron@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/569840/
Link: https://lore.kernel.org/r/20231130-sc8180x-dpu-safe-lut-v1-1-a8a6bbac36b8@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
EV_HPD_INIT_SETUP flag is used to trigger the initialization of external
DP host controller. Since external DP host controller initialization had
been incorporated into pm_runtime_resume(), this flag became obsolete.
msm_dp_irq_postinstall() which triggers EV_HPD_INIT_SETUP event is
obsoleted accordingly.
Changes in v4:
-- reworded commit text
-- drop EV_HPD_INIT_SETUP
-- drop msm_dp_irq_postinstall()
Changes in v3:
-- drop EV_HPD_INIT_SETUP and msm_dp_irq_postinstall()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570075/
Link: https://lore.kernel.org/r/1701472789-25951-7-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
It's certainly possible that for large resolutions a single DPU SSPP
cannot process the image without exceeding the MDP clock limits but
it can still process it in multirect mode because the source rectangles
will get divided and can fall within the MDP clock limits.
If the SSPP cannot process the image even in multirect mode, then it
will be rejected in dpu_plane_atomic_check_pipe().
Hence try using multirect for resolutions which cannot be processed
by a single SSPP without exceeding the MDP clock limits.
changes in v2:
- use crtc_state's adjusted_mode instead of mode
- fix the UBWC condition to check maxlinewidth
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556817/
Link: https://lore.kernel.org/r/20230911221627.9569-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes for v6.7-rc3:
- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
During USB transfers on the SC8280XP __arm_smmu_tlb_sync() is seen to
typically take 1-2ms to complete. As expected this results in poor
performance, something that has been mitigated by proposing running the
iommu in non-strict mode (boot with iommu.strict=0).
This turns out to be related to the SAFE logic, and programming the QOS
SAFE values in the DPU (per suggestion from Rob and Doug) reduces the
TLB sync time to below 10us, which means significant less time spent
with interrupts disabled and a significant boost in throughput.
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Cc: stable@vger.kernel.org
Suggested-by: Doug Anderson <dianders@chromium.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/565094/
Link: https://lore.kernel.org/r/20231030-sc8280xp-dpu-safe-lut-v1-1-6d485d7b428f@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Updates for v6.7
DP:
- use existing helpers for DPCD handling instead of open-coded functions
- set the subconnector type according to the plugged cable / dongle
skip validity check for DP CTS EDID checksum
DPU:
- continued migration of feature flags to use core revision checks
- reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices
from log / trace output
gpu:
- a7xx support (a730, a740)
- fixes and additional speedbins for a635, a643
core:
- decouple msm_drv from kms to more cleanly support headless devices (like
imx5+a2xx)
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Enable WB2 hardware block, enabling writeback support on this platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562328/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The SM8550 has the SSPP clk_ctrl in the SSPP registers, remove the
duplicate clock controls from the MDP top.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562330/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now SSPP and WB can have setup_force_clk_ctrl() ops, it's simpler to call
them from the plane and wb code and call into the mdp ops if not present.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562325/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Starting from SM8550, the SSPP & WB clock controls are moved
the SSPP and WB register range, as it's called "VBIF_CLK_SPLIT"
downstream.
Implement setup_clk_force_ctrl() only starting from major version 9
which corresponds to SM8550 MDSS.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562322/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add an helper to setup the force clock control as it will
be used in multiple HW files.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562323/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The msm_drv_shutdown function should only be used in the KMS case.
Rename it accordingly.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561652/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rename the msm_pm_prepare() and msm_pm_complete() to
msm_kms_pm_prepare() and msm_kms_pm_complete() consequently.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561646/
Signed-off-by: Rob Clark <robdclark@chromium.org>
To let the probe function bail early if any of the resources is
unavailable, move resource allocattion from kms_init directly to the
probe callback. While we are at it, replace irq_of_parse_and_map() with
platform_get_irq().
This also drops devm_iounmap() calls. It is too early to have them
_dpu_kms_hw_destroy() (or it will break if for some reason DPU device is
rebound into the composite device) and it doesn't make sense to have
them in dpu_dev_remove (as everything will be torn down by the devres
anyway after the device is unbound from the driver).
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561629/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In preparation of moving resource allocation to the probe time, allow
MSM KMS drivers to pass struct msm_kms pointer via msm_drv_probe().
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561627/
Signed-off-by: Rob Clark <robdclark@chromium.org>
As the INTF is fixed at the encoder creation time, we can move the
check whether INTF supports tearchck to dpu_encoder_phys_cmd_init().
This function can return an error if INTF doesn't have required feature.
Performing this check in dpu_encoder_phys_cmd_tearcheck_config() is less
useful, as this function returns void.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/555553/
Link: https://lore.kernel.org/r/20230904020454.2945667-9-dmitry.baryshkov@linaro.org
The DPU_INTF_TE bit is set for all INTF blocks on DPU >= 5.0, however
only INTF_1 and INTF_2 actually support tearing control (both are
INTF_DSI). Rather than trying to limit the DPU_INTF_TE feature bit to
those two INTF instances, check for the major && INTF type.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/555547/
Link: https://lore.kernel.org/r/20230904020454.2945667-6-dmitry.baryshkov@linaro.org
Move the setting of dpu_enc::wide_bus_en to
dpu_encoder_virt_atomic_enable() so that it mirrors how dpu_enc::dsc
is being set.
Since wide bus for DSI is related to DSC, having it mirror how DSC
is set in DPU will also make it easier to accommodate for the possibility
of DSC for DSI being set during runtime in the future.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/553759/
Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-1-9dc86083d6ea@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551872/
Link: https://lore.kernel.org/r/20230809034445.434902-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In order to simplify IRQ declarations, shift IRQ indices by 1. This
makes 0 the 'no IRQ' value. Thanks to this change, we do no longer have
to explicitly set the 'no interrupt' fields in catalog structures.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550938/
Link: https://lore.kernel.org/r/20230802100426.4184892-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, dpu_plane_atomic_check() does not check whether the
plane can process the image without exceeding the per chipset
limits for MDP clock. This leads to underflow issues because the
SSPP is not able to complete the processing for the data rate of
the display.
Fail the dpu_plane_atomic_check() if the SSPP cannot process the
image without exceeding the MDP clock limits.
changes in v2:
- use crtc_state's adjusted_mode instead of mode
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556819/
Link: https://lore.kernel.org/r/20230911221627.9569-1-quic_abhinavk@quicinc.com
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct dpu_hw_intr.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922173216.3823169-4-keescook@chromium.org
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
_dpu_plane_calc_bw() uses integer variables to calculate the bandwidth
used during plane bandwidth calculations. However for high resolution
displays this overflows easily and leads to below errors
[dpu error]crtc83 failed performance check -7
Promote the intermediate variables to u64 to avoid overflow.
changes in v2:
- change to u64 where actually needed in the math
Fixes: c33b7c0389 ("drm/msm/dpu: add support for clk and bw scaling for display")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Nia Espera <nespera@igalia.com>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/32
Tested-by: Nia Espera <nespera@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/556288/
Link: https://lore.kernel.org/r/20230908012616.20654-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the msm drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-32-u.kleine-koenig@pengutronix.de
Since commit 1e7ac595fa ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org
When removing the core perf tune overrides, I also occasionaly removed the
initialisation of the clk_rate variable. Initialise it to 0 to let max()
correctly calculate the maximum of requested clock rates.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 6a4bc73915 ("drm/msm/dpu: drop separate dpu_core_perf_tune overrides")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551321/
Link: https://lore.kernel.org/r/20230804094804.36053-1-dmitry.baryshkov@linaro.org
Drop vsync_event and vsync_event_work handlers as they are unnecessary.
In addition drop the dpu_enc_ktime_template event class as it will be
unused after the vsync_event handlers are dropped.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550983/
Link: https://lore.kernel.org/r/20230802-encoder-cleanup-v2-1-5bfdec0ce765@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Both struct dpu_dsc_sub_blks instances declare enc subblock length to be
0x100, while the actual length is 0x9c (last register having offset 0x98).
Reduce subblock length to remove the empty register space from being
dumped.
Fixes: 0d1b10c633 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550999/
Link: https://lore.kernel.org/r/20230802183655.4188640-2-dmitry.baryshkov@linaro.org
All DSC_BLK_1_2 declarations incorrectly pass 0x29c as the block length.
This includes the common block itself, enc subblocks and some empty
space around. Change that to pass 0x4 instead, the length of common
register block itself.
Fixes: 0d1b10c633 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Reported-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/550998/
Link: https://lore.kernel.org/r/20230802183655.4188640-1-dmitry.baryshkov@linaro.org
sm8550 has 16 vbif clients.
This fixes the extra 2 clients (DMA4/DMA5) not having their memtype
initialized. This fixes DMA4/DMA5 planes not displaying correctly.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/550968/
Link: https://lore.kernel.org/r/20230802134900.30435-1-jonathan@marek.ca
[DB: fixed the Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The dev_pm_opp_set_rate() already contains a call for clk_round_rate for
the passed value. Stop calling it manually from
_dpu_core_perf_get_core_clk_rate(). It is slightly incorrect to call it
this way, as we should round the final calculated clock rate rather than
rounding all the intermediate values.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550212/
Link: https://lore.kernel.org/r/20230730010102.350713-9-dmitry.baryshkov@linaro.org
dpu_core_perf.c contains several multi-line conditions which are hard to
comprehent because of the indentation. Rework the identation of these
conditions to make it easier to understand them.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550197/
Link: https://lore.kernel.org/r/20230730010102.350713-5-dmitry.baryshkov@linaro.org
The values in struct dpu_core_perf_tune are fixed per the core perf
mode. Drop the 'tune' values and substitute them with known values when
performing perf management.
Note: min_bus_vote was not used at all, so it is just silently dropped.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550208/
Link: https://lore.kernel.org/r/20230730010102.350713-4-dmitry.baryshkov@linaro.org
Switch to using data from MDSS driver to program the SSPP fetch and UBWC
configuration. As a side-effect, this also swithes the DPU driver from
DPU_HW_UBWC_VER_xx values to the UBWC_x_y enum, which reflects
the hardware register values.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550054/
Link: https://lore.kernel.org/r/20230728213320.97309-6-dmitry.baryshkov@linaro.org
Declaring the mask of supported interrupts proved to be error-prone. It
is very easy to add a bit with no corresponding backing block or to miss
the INTF TE bit. Replace this with looping over the enabled INTF blocks
to setup the irq mask.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549654/
Link: https://lore.kernel.org/r/20230727144543.1483630-4-dmitry.baryshkov@linaro.org
There is no point in having a single enum (and a single array) for both
DPU < 7.0 and DPU >= 7.0 interrupt registers. Instead define a single
enum and two IRQ address arrays.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: c731461322 ("drm/msm: Add missing struct identifier")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549653/
Link: https://lore.kernel.org/r/20230727144543.1483630-3-dmitry.baryshkov@linaro.org
Rename the intf's enable_compression() op to program_intf_cmd_cfg()
and allow it to accept a struct intf_cmd_mode_cfg to program
all the bits at once. This can be re-used by widebus later on as
well as it touches the same register.
changes in v5:
- rename struct intf_cmd_mode_cfg to dpu_hw_intf_cmd_mode_cfg
- remove couple of comments
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546806/
Link: https://lore.kernel.org/r/20230712012003.2212-5-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_hw_intf has a few instances of structs which do not have
the dpu_hw prefix. Lets fix this by renaming those structs
and updating the usage of those accordingly.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546805/
Link: https://lore.kernel.org/r/20230712012003.2212-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Instead of using a feature bit to decide whether to enable data
compress or not for DSC use-cases, use dpu core's major version
instead by assigning the enable_compression op based on the
dpu core's major version.
To make this possible pass the struct dpu_mdss_version to
dpu_hw_intf_init().
This will avoid defining feature bits for every bit level details of
registers.
changes in v5:
- none
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546803/
Link: https://lore.kernel.org/r/20230712012003.2212-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Introduce the dpu core revision back as an entry to the catalog so that
we can just use dpu revision checks and enable those bits which
should be enabled unconditionally and not controlled by a catalog
and also simplify the changes to do something like:
if (dpu_core_revision > xxxxx && dpu_core_revision < xxxxx)
enable the bit;
changes in v5:
- fix the commit text to remove instances of DPU_HW_VER
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546801/
Link: https://lore.kernel.org/r/20230712012003.2212-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, the device core dump mechanism does not dump registers of
sub-blocks within the DSPP, SSPP, DSC, and PINGPONG blocks. Edit
dpu_kms_mdp_snapshot function to account for sub-blocks.
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546192/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-6-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, the names of main blocks are hardcoded into the
msm_disp_snapshot_add_block function rather than using the name that
already exists in the catalog. Change this to take the name directly from
the catalog instead of hardcoding it.
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546194/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-5-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For a device core dump, the registers of sub-blocks are printed under a
title formatted as <mainBlkName_sblkName>. For example, the csc sub-block
for an SSPP main block "sspp_0" would be printed "sspp_0_sspp_csc0". The
title is clearly redundant due to the duplicate "sspp" and "0" that exist
in both the mainBlkName and sblkName. To eliminate this redundancy, remove
the secondary "sspp" and "0" that exist in the sub-block name by
elimanting the "sspp_" prefix and the concatenation of "num" that results
in the redundant "0" suffix. Remove num parameter altogether from relevant
macros as a consequence of it no longer being used.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546198/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-4-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Some sub-blocks in the hw catalog have not been given a name, so when the
registers from that block are dumped, there is no name to reference.
Define names for relevant sub-blocks to fix this.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546199/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-3-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Note that with this, DMA4/DMA5 are still non-functional, but at least
display *something* in modetest instead of nothing or underflow.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/545548/
Link: https://lore.kernel.org/r/20230704160106.26055-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545378/
Link: https://lore.kernel.org/r/20230704022136.130522-18-dmitry.baryshkov@linaro.org
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545380/
Link: https://lore.kernel.org/r/20230704022136.130522-17-dmitry.baryshkov@linaro.org
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545371/
Link: https://lore.kernel.org/r/20230704022136.130522-16-dmitry.baryshkov@linaro.org
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545382/
Link: https://lore.kernel.org/r/20230704022136.130522-15-dmitry.baryshkov@linaro.org
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545362/
Link: https://lore.kernel.org/r/20230704022136.130522-13-dmitry.baryshkov@linaro.org
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545359/
Link: https://lore.kernel.org/r/20230704022136.130522-12-dmitry.baryshkov@linaro.org
To simplify making changes to the hardware block definitions, expand
corresponding macros. This way making all the changes are more obvious
and visible in the source files.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545377/
Link: https://lore.kernel.org/r/20230704022136.130522-11-dmitry.baryshkov@linaro.org
Shift dpu_ctl_cfg contents to correct the indentation of CTL blocks.
This is done in preparation to expanding the rest of hardware block
defines, so that all blocks have similar indentation.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545374/
Link: https://lore.kernel.org/r/20230704022136.130522-10-dmitry.baryshkov@linaro.org
Use more standard initialisation for .clk_ctrls definitions. Define a
single .clk_ctrls field and use array init inside.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545368/
Link: https://lore.kernel.org/r/20230704022136.130522-7-dmitry.baryshkov@linaro.org
In several catalog entries we did not use existing MSM_DP_CONTROLLER_n
constants. Fill them in. Also use freshly defined MSM_DSI_CONTROLLER_n
for DSI interfaces.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545353/
Link: https://lore.kernel.org/r/20230704022136.130522-3-dmitry.baryshkov@linaro.org
Since struct drm_dsc_config is stored at atomic_enable() instead
of display setup time during boot up, saving struct drm_dsc_config
at struct msm_display_info is not necessary. Lets drop the dsc member
from struct msm_display_info.
Changes in v4:
-- fix "Since" at commit text
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543866/
Link: https://lore.kernel.org/r/1687454686-10340-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently struct drm_dsc_config for DSI is populated at display
setup during system boot up. This mechanism works fine with
embedded display but not for pluggable displays as the
struct drm_dsc_config will become stale once external display
is unplugged.
In preparation of adding support for DP DSC support
move storing of DSI DSC struct to atomic_enable() so that same
mechanism will work for both embedded display and pluggable
displays.
Changes in v4:
-- fix checkpatch.pl warning
Changes in v5:
-- delete dpu_encoder_get_dsc_config() from atomic_mode_set
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543867/
Link: https://lore.kernel.org/r/1687454686-10340-2-git-send-email-quic_khsieh@quicinc.com
[DB: fixed commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SDM845 was the first SoC to include both PCC v4 and GC v1.8.
We don't currently support any other blocks but the common config
for these two can be reused for a large amount of SoCs.
Rename it to indicate the origin of that combo.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533003/
Link: https://lore.kernel.org/r/20230420-topic-dpu_gc-v1-1-d9d1a5e40917@linaro.org
[DB: also applied to new catalog files]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
During IRQ conversion we have lost the PP_DONE interrupts for sc7280
platform. This was left unnoticed, because this interrupt is only used
for CMD outputs and probably no sc7[12]80 systems use DSI CMD panels.
Fixes: 667e9985ee ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542175/
Link: https://lore.kernel.org/r/20230613001004.3426676-2-dmitry.baryshkov@linaro.org
Add a DPU INTF op to set the DCE_DATA_COMPRESS bit to enable the
DCE/DSC 1.2 datapath
Note: For now, this op is called for command mode encoders only. Changes to
set DATA_COMPRESS for video mode encoders will be posted along with DSC
v1.2 support for DP.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/541966/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-4-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In DPU 7.x and later, DSC/DCE enablement registers have been moved from
PINGPONG to INTF. Thus, add a DPU_INTF_DATA_COMPRESS feature flag that will
be set if the DATA_COMPRESS register is in the INTF block.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/541967/
Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-3-95eab864d1b6@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and
feature flag information. Each display compression engine (DCE) contains
dual DSC encoders so both share same base address but with its own
different sub block address.
changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- re arrange sc8280xp_dsc[]
changes in v4:
-- fix checkpatch warning
changes in v10:
-- remove hard slice from commit text
-- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN
-- change DSC_BLK_1_2 .len from 0x100 to 0x29c
changes in v11:
-- remove comment at DSC_BLK_1_2 marco
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539507/
Link: https://lore.kernel.org/r/1685036458-22683-10-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for DSC 1.2 by providing the necessary hooks to program
the DPU DSC 1.2 encoder.
Changes in v3:
-- fixed kernel test rebot report that "__iomem *off" is declared but not
used at dpu_hw_dsc_config_1_2()
-- unrolling thresh loops
Changes in v4:
-- delete DPU_DSC_HW_REV_1_1
-- delete off and used real register name directly
Changes in v7:
-- replace offset with sblk->enc.base
-- replace ss with slice
Changes in v8:
-- fixed checkpatch warning
Changes in v9:
-- replaced __dsc_calc_ob_max_addr() with __dsc_calc_output_buf_max_addr()
-- replaced variable num_ss with num_softslice
-- remove inline from function declaration
changes in v10:
-- rewording text of changes in v9
-- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN
-- replace drm_dsc_calculate_flatness_det_thresh() with drm_dsc_flatness_det_thresh()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539500/
Link: https://lore.kernel.org/r/1685036458-22683-7-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The current dpu_hw_dsc calculation for det_thresh_flatness does not
match the downstream calculation or the DSC spec.
Use the DRM DSC helper for det_thresh_flatness to match downstream
implementation and the DSC spec.
Fixes: c110cfd175 ("drm/msm/disp/dpu1: Add support for DSC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539275/
Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-6-bafc7be95691@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We can not support color management without DSPP blocks being provided
in the HW catalog. Do not enable color management for CRTCs if num_dspps
is 0.
Fixes: 4259ff7ae5 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542141/
Link: https://lore.kernel.org/r/20230612182534.3345805-1-dmitry.baryshkov@linaro.org
Core:
- Add Marijn Suijten as drm/msm reviewer
- Adreno A660 bindings
- SM8350 MDSS bindings fix
DP:
- Removed obsolete USB-PD remains
- Documented DP compatible string for sm8550 platform
DPU:
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Enabled writeback on sc7280
- Enabled DSC on msm8998
- Native HDMI output support
- Dropped unused features: regdma, GC, IGC
- Fixed the DSC flush operations
- Simplified QoS handling, removing obsolete and unused features and merging
SSPP and WB code paths
- Reworked dpu_encoder initialisation path
DSI:
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Dropped powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
- Fixed 14nm DSI PHY programming
MDP5:
- Added support for display controller on MSM8226 platform
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The "vsync_hz" variable is unsigned int so it can't be less
than zero. The dpu_kms_get_clk_rate() function used to return a u64
but I previously changed it to return an unsigned long and zero on
error so it matches clk_get_rate().
Change the "vsync_hz" type to unsigned long as well and change the
error checking to check for zero instead of negatives. This change
does not affect runtime at all. It's just a clean up.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/541225/
Link: https://lore.kernel.org/r/ZH7vP2Swu8CYpgUL@moroto
[DB: fixed debug message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MSM8998 doesn't have DSC blocks declared in the catalog. Complete DSC
1.1 support for all platforms by adding the missing blocks to MSM8998.
Changes in v9:
-- add MSM8998 and SC8180x to commit title
Changes in v10:
-- fix grammar at commit text
Changes in v12:
-- fix "titil" with "title" at changes in v9
Changes in v14:
-- "dsc" tp "DSC" at commit title
Changes in v15:
-- fix merge conflicts at dpu_5_1_sc8180x.h
Changes in v16
-- fix cherry-pick error by deleting both redundant .dsc and .dsc_count
assignment from dpu_5_1_sc8180x.h
Changes in v17
-- remove sc8180x from both commit title and text
-- remove Reviewed-by
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/541371/
Link: https://lore.kernel.org/r/1686082272-22191-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed commit message as agreed in the email discussion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add SM6350 support to the DPU1 driver to enable display output.
It's worth noting that one entry dpu_qos_lut_entry was trimmed off:
{.fl = 0, .lut = 0x0011223344556677 },
due to the lack of support for selecting between portrait and landscape
LUT settings (for danger and safe LUTs) and no full support for
qseed/non-qseed usescases (for QoS LUT).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/541287/
Link: https://lore.kernel.org/r/20230411-topic-straitlagoon_mdss-v6-6-dee6a882571b@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the driver passes the PINGPONG index to
dpu_hw_wb_ops::bind_pingpong_blk() callback and uses separate boolean
flag to tell whether WB should be bound or unbound. Simplify this by
passing PINGPONG_NONE in case of unbinding and drop the flag completely.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/540969/
Link: https://lore.kernel.org/r/20230604031308.894274-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the driver passes the PINGPONG index to
dpu_hw_intf_ops::bind_pingpong_blk() callback and uses separate boolean
flag to tell whether INTF should be bound or unbound. Simplify this by
passing PINGPONG_NONE in case of unbinding and drop the flag completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/540968/
Link: https://lore.kernel.org/r/20230604031308.894274-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is no need to assign a result to temp varable just to return it
after a goto. Drop the temporary variable and goto and return the result
directly.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540639/
Link: https://lore.kernel.org/r/20230601172236.564445-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is no need to assign a result to temp varable just to return it
two lines below. Drop the temporary variable.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540637/
Link: https://lore.kernel.org/r/20230601172236.564445-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is little sense to get intf index just to call dpu_rm_get_intf()
on it. Move dpu_rm_get_intf() call to dpu_encoder_get_intf() function.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540632/
Link: https://lore.kernel.org/r/20230601172236.564445-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The function dpu_encoder_get_wb() returns controller_id if the
corresponding WB is present in the catalog. We can inline this function
and rely on dpu_rm_get_wb() returning NULL for indices for which the
WB is not present on the device.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540634/
Link: https://lore.kernel.org/r/20230601172236.564445-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove intf_idx and wb_idx fields from struct dpu_encoder_phys and
struct dpu_enc_phys_init_params. Set the hw_intf and hw_wb directly and
use them to get the instance index.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540635/
Link: https://lore.kernel.org/r/20230601172236.564445-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is no reason to split the dpu_encoder interface into separate
_init() and _setup() phases. Merge them into a single function.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540628/
Link: https://lore.kernel.org/r/20230601172236.564445-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Static analysis tools complain about the -EINVAL error code being
stored in an unsigned variable. Let's change this to match
the clk_get_rate() function which is type unsigned long and returns
zero on error.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/539626/
Link: https://lore.kernel.org/r/28644c5e-950e-41cd-8389-67f37b067bdc@kili.mountain
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
to tear down DSC data path if DSC data path was setup previous.
Changes in V10:
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- move both dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() to above phys_cleanup()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539515/
Link: https://lore.kernel.org/r/1685036458-22683-11-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently DSC flushing happens during interface configuration at
dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from
dpu_hw_ctl_intf_cfg_v1() by adding dpu_hw_ctl_update_pending_flush_dsc_v1()
to handle both per-DSC engine and DSC flush bits at same time to make it
consistent with the location of flush programming of other DPU sub-blocks.
Changes in v10:
-- rewording commit text
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- ctx->pending_dsc_flush_mask = 0;
Changes in v11:
-- add Fixes tag
Changes in v12:
-- move dsc parameter to next line at dpu_encoder_dsc_pipe_cfg()
Changes in v14:
-- Fixes tag had been move to 1st patch of this series
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539506/
Link: https://lore.kernel.org/r/1685036458-22683-9-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There are two tiers of pending flush control, top level and
individual hardware block. Currently only the top level of
flush mask is reset to 0 but the individual pending flush masks
of particular hardware blocks are left at their previous values,
eventually accumulating all possible bit values and typically
flushing more than necessary.
Reset all individual hardware block flush masks to 0 to avoid
accidentally flushing them.
Changes in V13:
-- rewording commit text
-- add an empty space line as suggested
Changes in V14:
-- add Fixes tag
Fixes: 73bfb790ac ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539508/
Link: https://lore.kernel.org/r/1685036458-22683-8-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Disabling the crossbar mux between DSC and PINGPONG currently
requires a bogus enum dpu_pingpong value to be passed when calling
dsc_bind_pingpong_blk() with enable=false, even though the register
value written is independent of the current PINGPONG block. Replace
that `bool enable` parameter with a new PINGPONG_NONE dpu_pingpong
flag that triggers the write of the "special" 0xF "crossbar
disabled" value to the register instead.
Changes in v4:
-- more details to commit text
Changes in v5:
-- rewording commit text suggested by Marijn
-- add DRM_DEBUG_KMS for DSC unbinding case
Changes in v8:
-- fix checkpatch warning
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539505/
Link: https://lore.kernel.org/r/1685036458-22683-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU < 7.0.0 has DPU_PINGPONG_DSC feature bit set to indicate it requires
both dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() to be
executed to complete DSC configuration if DSC hardware block is present.
Hence test DPU_PINGPONG_DSC feature bit and assign DSC related functions
to the ops of PINGPONG block accordingly if DPU_PINGPONG_DSC bit is set.
Changes in v6:
-- split patches, this patch has function handles DPU_PINGPONG_DSC bit
Changes in v9:
-- the original code of assigning dsc related functions to the ops of
pingpong block without testing the DPU_PINGPONG_DSC feature bit was
restored back due to rebase error which defeat the purpose of this
patch. Remove those error code.
Changes in v10:
-- change commit title
-- correct texts at changes in v9
Changes in v12:
-- fixed length too long at Changes in v9
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539504/
Link: https://lore.kernel.org/r/1685036458-22683-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU < 7.0.0 requires the PINGPONG block to be involved during
DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC
encoder engine was moved to INTF with the help of the flush mechanism.
Add a DPU_PINGPONG_DSC feature bit to restrict the availability of
dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the
PINGPONG block to DPU < 7.0.0 hardware, as the registers are not
available on DPU 7.0.0 and higher anymore.
Add DPU_PINGPONG_DSC to PINGPONG_SDM845_MASK, PINGPONG_SDM845_TE2_MASK
and PINGPONG_SM8150_MASK which is used for all DPU < 7.0 chipsets.
changes in v6:
-- split patches and rearrange to keep catalog related files at this patch
changes in v7:
-- rewording commit text as suggested at review comments
changes in v9:
-- delete BIT(DPU_PINGPONG_DSC) from PINGPONG_SDM845_TE2_MASK
changes in v10:
-- correct order of commit text
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539502/
Link: https://lore.kernel.org/r/1685036458-22683-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The CTL_FLUSH register should be programmed with the 22th bit
(DSC_IDX) to flush the DSC hardware blocks, not the literal value of
22 (which corresponds to flushing VIG1, VIG2 and RGB1 instead).
Changes in V12:
-- split this patch out of "separate DSC flush update out of interface"
Changes in V13:
-- rewording the commit text
Changes in V14:
-- drop 'DSC" from "The DSC CTL_FLUSH register" at commit text
Fixes: 77f6da9048 ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539496/
Link: https://lore.kernel.org/r/1685036458-22683-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This define is used only in one place, in dpu_encoder debugfs code.
Inline the value and drop the define completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538303/
Link: https://lore.kernel.org/r/20230521192230.9747-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
After removal of DPU_PLANE_QOS_VBLANK_CTRL, several fields of struct
dpu_hw_pipe_qos_cfg are fixed to false/0. Drop them from the structure
(and drop the corresponding code from the functions).
The DPU_PLANE_QOS_VBLANK_AMORTIZE flag is also removed, since it is now
a NOP.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537909/
Link: https://lore.kernel.org/r/20230518222238.3815293-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The function dpu_plane_sspp_update_pipe() contains code to skip enabling
the QoS and OT limitis for CURSOR pipes. However all DPU since sdm845
repurpose DMA SSPP for the cursor planes because they lack the real
CURSOR SSPP. Fix the condition to actually check that the plane is
CURSOR or not.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537911/
Link: https://lore.kernel.org/r/20230518222238.3815293-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Get rid of intermediatory configuration structure and defines. Pass the
format and the enablement bit directly to the new helper. The
WB_CDP_CNTL register ignores BIT(2), so we can write it for both SSPP
and WB CDP settings.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537910/
Link: https://lore.kernel.org/r/20230518222238.3815293-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move the check for lm->pingpong being not NONE from dpu_rm_init() to
dpu_lm_init(), following the change to dpu_hw_intf_init().
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538206/
Link: https://lore.kernel.org/r/20230519234025.2864377-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On msm8998/sdm845 some LM blocks do not have corresponding PINGPONG
block. Currently the driver uses PINGPONG_MAX for such cases. Switch
that to use PINGPONG_NONE instead, which is more logical.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538205/
Link: https://lore.kernel.org/r/20230519234025.2864377-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_rm_init() contains checks for block->id values. These were logical
in the vendor driver, when one can not be sure which values were passed
from DT. In the upstream driver this is not necessary: the catalog is a
part of the driver, we control specified IDs.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538204/
Link: https://lore.kernel.org/r/20230519234025.2864377-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If
the value is NULL, then the function will return 0 instead of a proper
return code. Moreover dpu_hw_dsc_init() can not return NULL.
Replace the IS_ERR_OR_NULL() call with IS_ERR().
This follows the commit 740828c73a ("drm/msm/dpu: fix error handling
in dpu_rm_init"), which removed IS_ERR_OR_NULL() from RM init code, but
then the commit f2803ee91a ("drm/msm/disp/dpu1: Add DSC support in
RM") added it for DSC init.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538203/
Link: https://lore.kernel.org/r/20230519234025.2864377-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU5 and newer targets enable this unconditionally. Move it from the
SC7280 mask to the SC7180 one.
Fixes: 7e6ee55320 ("drm/msm/disp/dpu1: enable DATA_HCTL_EN for sc7280 target")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538159/
Link: https://lore.kernel.org/r/20230508-topic-hctl_en-v2-1-e7bea9f1f5dd@linaro.org
[DB: removed BIT(DPU_INTF_DATA_COMPRESS), which is not yet merged]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stop using _sspp_subblk_offset() to get offset of the csc_blk. Inline
this function and use ctx->cap->sblk->csc_blk.base directly.
As this was the last user, drop _sspp_subblk_offset() too.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534747/
Link: https://lore.kernel.org/r/20230429012353.2569481-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stop using _sspp_subblk_offset() to get offset of the scaler_blk. Inline
this function and use ctx->cap->sblk->scaler_blk.base directly.
Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534746/
Link: https://lore.kernel.org/r/20230429012353.2569481-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The src_blk declares a lame copy of main SSPP register space. It's
offset is always 0. It's length has been fixed to 0x150, while SSPP's
length is now correct. Drop the src_blk and access SSPP registers
without additional subblock lookup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534745/
Link: https://lore.kernel.org/r/20230429012353.2569481-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now that newer DPU platforms use a readpointer-done interrupt on the
INTF block, stop providing the unused interrupt on the PINGPONG block.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534238/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-22-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since DPU 5.0.0 the TEARCHECK registers and interrupts moved out of the
PINGPONG block and into the INTF. Implement the necessary callbacks in
the INTF block, and use these callbacks together with the INTF_TEAR
interrupts.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534234/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-21-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
These functions are always called consecutively and are best bundled
together for simplicity, especially when the same structure of callbacks
will be replicated later on the interface block for INTF TE support.
The enable_tearcheck(false) case is now replaced with a more obvious
disable_tearcheck(), encapsulating the original register write with 0.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534217/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-20-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of
the PINGPONG block and into the INTF block. The new interrupts are
described in dpu_hw_interrupts.c, now wire them up in individual SoC
catalog files by setting the intr_tear_rd_ptr to the IRQ index spcified
in the offset table and enabling this set of DPU interrupts via the
mdss_irqs bitmask.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534236/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-19-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of
the PINGPONG block and into the INTF block. Wire up the IRQ register
masks in the interrupt table for enabling, reading and clearing them.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534244/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-18-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As the INTF block is going to attain more interrupts that don't share
the same MDP_SSPP_TOP0_INTR register, factor out the _reg argument for
the caller to construct the right interrupt index (register and bit
index) to not make the interrupt bit arguments depend on one of multiple
interrupt register indices. This brings us more in line with how PP_BLK
specifies its interrupts and allows for better wrapping in the arrays.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534222/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-17-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now that newer SoCs since DPU 5.0.0 manage tearcheck in the INTF instead
of PINGPONG block, move the struct definition to a common file. Also,
bring in documentation from msm-4.19 techpack while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[Marijn: Also move dpu_hw_pp_vsync_info]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534232/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-16-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since hardware revision 5.0.0 the TE configuration moved out of the
PINGPONG block into the INTF block, including vsync source selection
that was previously part of MDP top. Writing to the MDP_VSYNC_SEL
register has no effect anymore and is omitted downstream via the
DPU/SDE_MDP_VSYNC_SEL feature flag. This flag is only added to INTF
blocks used by hardware prior to 5.0.0.
The code that writes to these registers in the INTF block will follow in
subsequent patches.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534220/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-15-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since hardware revision 5.0.0 the TE configuration moved out of the
PINGPONG block into the INTF block. Writing these registers has no
effect, and is omitted downstream via the DPU/SDE_PINGPONG_TE feature
flag. This flag is only added to PINGPONG blocks used by hardware prior
to 5.0.0.
The existing PP_BLK_TE macro has been removed in favour of directly
passing this feature flag, which has thus far been the only difference
with PP_BLK. PP_BLK_DITHER has been left in place as its embedded
feature flag already excludes this DPU_PINGPONG_TE bit and differs by
setting the block length to zero, as it only contains a DITHER subblock.
The code that writes to these registers in the INTF block will follow in
subsequent patches.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534240/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-14-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This autorefresh disable logic in the physical command-mode encoder
consumes three callbacks to the pingpong block, and will explode in
unnecessary complexity when the same callbacks need to be called on the
interface block instead to accommodate INTF TE support. To clean this
up, move the logic into the pingpong block under a disable_autorefresh
callback, replacing the aforementioned three get_autorefresh,
setup_autorefresh and get_vsync_info callbacks.
The same logic will have to be replicated to the interface block when it
receives INTF TE support, but it is less complex than constantly
switching on a "has_intf_te" boolean to choose a callback.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534230/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-13-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This callback was migrated from downstream when DPU1 was first
introduced to mainline, but never used by any component. Drop it to
save some lines and unnecessary confusion.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534215/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-12-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Instead of hardcoding many register defines for every INTF and AD4 index
with a fixed stride, turn the defines into singular chunks of math that
compute the address using the base and this fixed stride multiplied by
the index given as argument to the definitions.
MDP_SSPP_TOP0_OFF is dropped as that constant is zero anyway, and all
register offsets related to it live in dpu_hwio.h.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534221/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-11-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
A bunch of registers were appended at the end in e.g. commit
91143873a0 ("drm/msm/dpu: Add MISR register support for interface")
rather than being inserted in a place that maintains numerical sorting:
restore said numerical sorting.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534213/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-10-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
A bunch of registers are indented with two extra spaces, looking as if
these are values corresponding to the previous register which is not the
case, rather these are simply also register offsets and should only have
a single space separating them and the #define keyword.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534218/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-9-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
According to various downstream sources the PCC sub-block inside DSPP is
version 4.0 since DPU 4.0 and higher, including SC7[12]80 at DPU version
6.2 and 7.2 respectively. After correcting the version this struct
becomes identical to sm8150_dspp_sblk which is used all across the
catalog: replace uses of sc7180_dspp_sblk with that and remove
the struct definition for sc7180_dspp_sblk entirely.
Fixes: 4259ff7ae5 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537899/
Link: https://lore.kernel.org/r/20230518-dpu-sc7180-pcc-version-v1-1-ec9ca4949e3e@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since GC and IGC masks have now been dropped, DSPP_MSM8998_MASK
is the same as DSPP_SC7180_MASK. Since DSPP_SC7180_MASK is used more
than DSPP_MSM8998_MASK, lets drop the latter.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534726/
Link: https://lore.kernel.org/r/20230428223646.23595-4-quic_abhinavk@quicinc.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Gamma Correction (GC) and Inverse Gamma Correction(IGC) is
currently unused. In addition dpu_dspp_sub_blks didn't even have an igc
member describing the block.
Drop related code from the dpu hardware catalog otherwise this becomes a
burden to carry across chipsets in the catalog.
changes in v3:
- drop IGC related code from dpu_hw_catalog too
- update commit text accordingly
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534725/
Link: https://lore.kernel.org/r/20230428223646.23595-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Inverse gamma correction blocks (IGC) are not used today so lets
remove the usage of DPU_DSPP_IGC in the DSPP flush to make it easier
to remove IGC from the catalog.
We can add this back when IGC is properly supported in DPU with
one of the standard DRM properties.
changes in v3:
- minor change dspp -> DSPP in commit text
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534724/
Link: https://lore.kernel.org/r/20230428223646.23595-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Gamma correction blocks (GC) are not used today so lets remove
the usage of DPU_DSPP_GC in the dspp flush to make it easier
to remove GC from the catalog.
We can add this back when GC is properly supported in DPU with
one of the standard DRM properties.
changes in v3:
- drop the link tag which was auto added before
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534723/
Link: https://lore.kernel.org/r/20230428223646.23595-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The Resource Manager already iterates over all available blocks from the
catalog, only to pass their ID to a dpu_hw_xxx_init() function which
uses an _xxx_offset() helper to search for and find the exact same
catalog pointer again to initialize the block with, fallible error
handling and all.
Instead, pass const pointers to the catalog entries directly to these
_init functions and drop the for loops entirely, saving on both
readability complexity and unnecessary cycles at boot.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533861/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-3-e8d869eea455@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Some of these members were initialized while never read, while others
were not even assigned any pointer value at all. Drop them to save some
space, and above all confusion when looking at or accidentally
dereferencing these members.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533862/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-2-e8d869eea455@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The regdma is currently not used by the current driver. We have no way
to practically verify that the regdma is described correctly. Drop it
now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533148/
Link: https://lore.kernel.org/r/20230420222558.1208887-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Do not override the hsync/vsync polarity passed by the encoder when
setting up intf timings. The same logic was used in both the encoder and
intf code to set the DP and DSI polarities, so those interfaces are not
impacted. However for HDMI, the polarities were overriden to static
values based on the vertical resolution, instead of using the actual
mode polarities.
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/532901/
Link: https://lore.kernel.org/r/20230419-dpu-tweaks-v1-3-d1bac46db075@freebox.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Rather than passing DRM_MODE_ENCODER_* and letting dpu_encoder to guess,
which intf type we mean, pass INTF_DSI/INTF_DP directly. This is
required to support HDMI output in DPU, as both DP and HDMI encoders are
DRM_MODE_ENCODER_TMDS. Thus dpu_encoder code can not make a difference
between HDMI and DP outputs.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Arnaud Vrac <rawoul@gmail.com>
Tested-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/532370/
Link: https://lore.kernel.org/r/20230415171926.85774-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On sm8450 platform the CTL_0 doesn't differ from the rest of CTL blocks,
so switch it to CTL_SC7280_MASK too.
Some background: original commit 100d7ef699 ("drm/msm/dpu: add support
for SM8450") had all (relevant at that time) bit spelled individually.
Then commit 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog"),
despite being a mismerge, correctly changed all other CTL entries to use
CTL_SC7280_MASK, except CTL_0.
While the current BLOCK_SOC_MASK style is not ideal (and while we are
working on a better scheme), let's follow its usage as a least minimal
surprise. For example, sc8280xp, a close associate of sm8450, also uses
CTL_SC7280_MASK.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/531493/
Link: https://lore.kernel.org/r/20230408002750.2722304-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The INTF_FRAME_LINE_COUNT_EN, INTF_FRAME_COUNT and INTF_LINE_COUNT
registers are already defined higher up, in the right place when sorted
numerically.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534231/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-8-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Despite downstream DTS stating otherwise, the PINGPONG block has no
registers starting with DPU revision 7.0.0. TEAR registers are gone
since DPU 5.0.0 after being moved to the INTF block, and DSC registers
are gone since 7.0.0, leaving only the dither sub-block.
A future patch, part of the DSC 1.2 series, should disable DSC functions
on the PINGPONG block for all DPU >= 7.0.0 hardware.
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534206/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-7-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
According to downstream sources this DITHER sub-block sits at an offset
of 0xe0 with version 0x20000. Lets fix this by using sc7280_pp_sblk
instead of sdm845_pp_sblk.
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534208/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-6-27ce1a5ab5c6@somainline.org
[quic_abhinavk@quicinc.com: minor fix in the commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
SM8550 exclusively has a DITHER sub-block inside the PINGPONG block and
no other registers, hence the DITHER name of the macro and a
corresponding PINGPONG block length of zero. However, the PP_BLK_ macro
name was typo'd to DIPHER rather than DITHER.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534214/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-5-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
These offsets do not fall under the MDP TOP block and do not fit the
comment right above. Move them to dpu_hw_interrupts.c next to the
repsective MDP_INTF_x_OFF interrupt block offsets.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534203/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-3-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
No hardware beyond kona (sm8250, DPU 6.0.0) defines the TE2 PINGPONG
sub-block offset downstream, and according to insiders no DPU >= 5.0.0
hardware has support for it either. Especially since neither downstream
nor upstream utilize these registers in any way, remove the erroneous
specification from SM8150, SC8180X, SM8250, SC7180, SM8350, SC8280XP and
SM8450 to prevent confusion.
Note that downstream enables the PPSPLIT (split-FIFO) topology (single
LM for 2 PP and 2 INTF) based on the presence of a TE2 block.
Fixes: 386fced3f7 ("drm/msm/dpu: add SM8150 to hw catalog")
Fixes: 7bdc0c4b81 ("msm:disp:dpu1: add support for display for SC7180 target")
Fixes: 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 4a352c2fc1 ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534210/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-2-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Neither of these SoCs has INTF0, they only have a DSI interface on index
1. Stop enabling an interrupt that can't fire.
Fixes: 3581b7062c ("drm/msm/disp/dpu1: add support for display on SM6115")
Fixes: 5334087ee7 ("drm/msm: add support for QCM2290 MDSS")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534204/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-1-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Change lm blocks pairs so that lm blocks with the same features are
paired together:
LM_0 and LM_1 with PP and DSPP
LM_2 and LM_5 with PP
LM_3 and LM_4
This matches the sdm845 configuration and allows using pp or dspp when 2
lm blocks are needed in the topology. In the previous config the
reservation code could never find an lm pair without a matching feature
set.
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Fixes: 94391a14fc ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/532905/
Link: https://lore.kernel.org/r/20230419-dpu-tweaks-v1-10-d1bac46db075@freebox.fr
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The WB debug log mask ended up never being assigned, leading to writes
to this block to never be logged even if the mask is enabled in
dpu_hw_util_log_mask via debugfs.
Fixes: 84a33d0fd9 ("drm/msm/dpu: add dpu_hw_wb abstraction for writeback blocks")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533860/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-1-e8d869eea455@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
For sm8150+ the DPU_CTL_SPLIT_DISPLAY should be replaced with
DPU_CTL_ACTIVE_CFG support (which supports having a single CTL for both
interfaces in a split). Add comments where this conversion is required.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/530871/
Link: https://lore.kernel.org/r/20230404130622.509628-31-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
