-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As per the WA, fbc stride need to be programmed always for bmg.
Display driver handles the need to program the fbc stride using
the override stride. So ensure that we always get the override
stride in case of bmg
v2: re-phrase the commit message.
Bspec: 74212
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://lore.kernel.org/r/20250428115554.116780-1-vinod.govindapillai@intel.com
The driver specific HDCP GSC code will eventually be part of the driver
cores rather than display. Remove the struct intel_display references
from them, and pass struct drm_device instead.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/bf9aa8e44e18eef41e3077a2966935b4e2649b62.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The opaque HDCP GSC context nicely abstracts the differences between
drivers. Pass that instead of struct drm_i915_private or struct
xe_device to intel_hdcp_gsc_msg_send(). We can store the driver specific
data in the context.
This lets us drop the dependency on i915_drv.h from
intel_hdcp_gsc_message.c.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/df1653212f9014e717701b017e78e0017884b870.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allocate and initialize the HDCP GSC message in
intel_hdcp_gsc_hdcp2_init() as before, but store the pointer to
display->hdcp.hdcp_message in the caller. Similarly, pass in the pointer
to intel_hdcp_gsc_free_message().
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/a74fcc941126bf92d12115b5faf4f75099e26242.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The gsc_hdcp_ops is duplicated and initialized exactly the same way in
two different places (for i915 and xe), and requires forward
declarations for all the hooks. Deduplicate, and make the functions
static.
There are slight differences in the i915 and xe implementations of
intel_hdcp_gsc_init() and intel_hdcp_gsc_fini(). Take the best of both,
and improve.
We need to expose intel_hdcp_gsc_hdcp2_init() and
intel_hdcp_gsc_free_message() for this, and create the latter for xe.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/21e7871b35d4c7d13f016b5ecb4f10e5be72c531.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Drop the FDO_BUG_URL from the source, and stop suggesting to file bugs
on DPCD backlight issues. We don't do this anywhere else in display,
this isn't a special snowflake.
As a consequence, also drop the dependency on i915_utils.h from
intel_dp_aux_backlight.c.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429112534.2121656-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Minimum HBlank is programmed to address jitter for high resolutions with
high refresh rates that have small Hblank, specifically where Hblank is
smaller than one MTP.
TODO: Add the min_hblank calculation for hdmi as well.
v2: move from intel_audio.c to intel_dp.c
some correction in link_bpp_x16 (Imre)
v3: min_hblank for 8b/10b MST and 128b/132b SST/MST
handle error for intel_dp_mst_dsc_get_slice_count
reset min_hblank before disabling transcoder (Imre)
v4: compute link_bpp_x16 within compute_min_hblank,
return error in case of compute failure
call compute_min_hblank() before vrr_compute_config (Imre)
v5: readout MIN_HBLAN reg for Xe3+
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-2-8b002f1506cc@intel.com
Following the convention, convert intel_hdmi.c to use an intel_connector
pointer everywhere, calling this pointer connector. If the intel
connector must be casted from a drm_connector, call this pointer
_connector and use this pointer only for the casting.
v2: Use for_each_new_intel_connector_in_state(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250428134716.3396802-3-imre.deak@intel.com
Following the convention, convert intel_dp.c to use an intel_connector
pointer everywhere, calling this pointer connector. If the intel
connector must be casted from a drm_connector, call this pointer
_connector and use this pointer only for the casting.
v2: Use for_each_intel_connector_iter(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250428134716.3396802-2-imre.deak@intel.com
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
Currently, only EDP supports alpm. So, check for alpm support and prevent
the DP connector from accessing the alpm register if doing so is unsupported.
Fixes: acff6d6bde ("drm/i915/lobf: Add mutex for alpm update")
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250425132107.2926759-1-animesh.manna@intel.com
Currently we disable the VGA plane from various places, sometimes
multiple times in the same init/resume sequence. Get rid of all this
mess and do it just once. The most correct place seems to be just
after intel_early_display_was() as that one applies various workarounds
that need to be in place before we touch any planes (including the
VGA plane).
Actually, we do still have a second caller in
vlv_display_power_well_init(). I think we still need that as the reset
value of VGACNTR is 0x0 and thus technically the VGA plane will be
(at least partially) enabled after the power well has been toggled.
In both cases we have the necessary power reference already held
(INIT power domain for load/resume case, and the display power well
itself being what we need for vlv_display_power_well_init()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Add some debugs to the VGA plane disable so that we can at least
see from the logs when it happens (and on which pipe). I was curious
about this at some point when I was seeing some random underruns
near the time when we disable the VGA plane, but I think in the end
that turned out to be a red herring.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make a generic alpm enable function for sink which can be used for
PSR2/PR/Lobf.
v1: Initial version.
v2: Move code comment to intel_psr_needs_alpm(). [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-12-animesh.manna@intel.com
Add an interface in debugfs which will help in debugging LOBF
feature.
v1: Initial version.
v2:
- Remove FORCE_EN flag. [Jouni]
- Change prefix from I915 to INTEL. [Jani]
- Use u8 instead of bool for lobf-debug flag. [Jani]
v3:
- Use intel_connector instead of display. [Jani]
- Remove edp connector check as it was already present
in caller function. [Jani]
- Remove loop of searching edp encoder which is directly
accessible from intel_connector. [Jani]
v4:
- Simplify alpm debug to bool instead of bit-mask. [Jani]
v5:
- Remove READ_ONCE(). [Jani]
- Modify variable name to *_disable_*. [Jouni]
v6: Improved debug print. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-8-animesh.manna@intel.com
For every commit the dependent condition for LOBF is checked
and accordingly update has_lobf flag which will be used
to update the ALPM_CTL register during commit.
v1: Initial version.
v2: Avoid reading h/w register without has_lobf check. [Jani]
v3: Update LOBF in post plane update instead of separate function. [Jouni]
v4:
- Add lobf disable print. [Jouni]
- Simplify condition check for enabling/disabling lobf. [Jouni]
v5: Disable LOBF in pre_plane_update(). [Jouni]
v6: use lobf flag of old_crtc_state and write 0 into ALPM_CTL. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-7-animesh.manna@intel.com
LOBF can be enabled with vrr fixed rate mode, so add check
if vmin = vmax = flipline in compute_config().
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-6-animesh.manna@intel.com
Currently clearing of alpm registers is done through psr_disable()
which is always not correct, without psr also alpm can exist. So
dis-integrate alpm_disable() from psr_disable().
v1: Initial version.
v2:
- Remove h/w register read from alpm_disable(). [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-5-animesh.manna@intel.com
Lobf is enabled part of ALPM configuration and if has_lobf
is set to true respective bit for LOBF will be set. Add debug
print while setting the bitfield of LOBF.
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-4-animesh.manna@intel.com
Enablement of LOBF is added in post plane update whenever
has_lobf flag is set. As LOBF can be enabled in non-psr
case as well so adding in post plane update. There is no
change of configuring alpm with psr path.
v1: Initial version.
v2: Use encoder-mask to find the associated encoder from
crtc-state. [Jani]
v3: Remove alpm_configure from intel_psr.c. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-3-animesh.manna@intel.com
Currently code is making assumption that PSR is enabled when
intel_alpm_configure is called. This doesn't work if alpm is configured
before PSR is enabled.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-2-animesh.manna@intel.com
Define the DP register contents using the REG_BIT, REG_GENMASK,
etc. macros. Ditch the unhelpful comments. Rename eDP related register
content macros to have EDP_ prefix.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250423100213.720585-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have extended using vblank DC workaround mechanism for
Wa_16025596647. Rename related functions and variables:
vblank_wa_num_pipes -> vblank_enable_count
vblank_dc_work -> vblank_notify_work
intel_display_vblank_dc_work -> intel_display_vblank_notify_work
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-14-jouni.hogander@intel.com
Scope of intel_psr_needs_block_dc_vblank has changed now. Rename it as
intel_psr_needs_vblank_notification. Also rename
intel_crtc::block_dc_for_vblank as intel_crtc:vblank_psr_notify
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-13-jouni.hogander@intel.com
This patch is applying workaround for underrun on idle PSR HW issue
(Wa_16025596647) when PSR is getting enabled. It uses vblank enable/disable
status, DC5/6 enabled disabled and enabled pipes count information made
available.
This patch is also adding calls to dc5/dc6, vblank enable/disable and pipe
enable/disable notification functions as needed.
intel_psr_needs_block_dc_vblank is modified to get vblank enable/disable
notification on PSR capable system.
v2: use intel_dmc interface instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-12-jouni.hogander@intel.com
Add interface to control if package C exit starts at the start of the
undelayed vblank. This is needed to implement workaround for underrun on
idle PSR HW issue (Wa_16025596647).
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-11-jouni.hogander@intel.com
To implement Wa_16025596647 we need to get notification of vblank interrupt
enable/disable. Add new interface to PSR code for this notification.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-10-jouni.hogander@intel.com
We need to apply/remove workaround for underrun on idle PSR HW issue
(Wa_16025596647) when DC5/6 is enabled/disabled. This patch implements
mechanism to notify PSR about DC5/6 enable/disable and applies/removes the
workaround using this notification.
Bspec: 74115
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-9-jouni.hogander@intel.com
We need to apply/remove workaround for underrun on idle PSR HW issue
(Wa_16025596647) when new pipe is enabled or pipe is getting disabled. This
patch implements mechanism to notify PSR about pipe enable/disable and
applies/removes the workaround using this notification.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-8-jouni.hogander@intel.com
Block PKG C-State when enabling PSR when enabling PSR as described in
workaround for underrun on idle PSR HW issue (Wa_16025596647).
v2: use intel_dmc_block_pkgc instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-7-jouni.hogander@intel.com
Add interface to block PKG C-state. This is needed to implement workaround
for underrun on idle PSR HW issue (Wa_16025596647).
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-6-jouni.hogander@intel.com
We need PIPEDMC_BLOCK_PKGC_SW definitions to implement workaround for
underrun on idle PSR HW issue (Wa_16025596647). Add PIPEDMC_BLOCK_PKGC_SW
register definitions.
Bspec: 71265
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-5-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need PIPEDMC_EVT_CTL_4 register. Add PIPEDMC_EVT_CTL_4 register
definitions.
Bspec: 67576
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-4-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need to know enabled. Figure out which non-PSR pipes we will have active
and store it into intel_crtc_state->active_non_psr_pipes. This is currently
assuming only one eDP on a time. I.e. possible secondary eDP with PSR
capable panel is not considered.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-3-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need to have current configured DC state available. Add new interface
for this purpose.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-2-jouni.hogander@intel.com
With the PCH macros switched to use struct intel_display, we have a
number of files that no longer need struct drm_i915_private or anything
else from i915_drv.h anymore. Remove the #include, and add the missing
includes that were previously implicit.
v2: Drop even more of the includes
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Observe that ibx_irq_reset() is really ibx_display_irq_reset(). Make it
so. Move to display, and call it directly from gen8_display_irq_reset()
instead of gen8_irq_reset().
Remove a nearby ancient stale comment while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250409184702.3790548-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Adding link rate and lane count information to i915_display_info makes it
easier and faster to access this data compared to checking kernel logs.
This is particularly beneficial for individuals who are not familiar with
i915 in the following scenarios:
* Debugging DP tunnel bandwidth usage in the Thunderbolt driver.
* During USB4 certification, it is necessary to know the link rate used by
the monitor to prove that the DP tunnel can handle required rates.
* In PHY CTS, when the connector probes are not mounted correctly,
some display lanes may not appear in the DP Oscilloscope, leading to CTS
failures.
This change provides validation teams with an easy way to identify and
troubleshoot issues.
v2: separate seq_printf line (Jani)
v3: separate output line (Jani)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250409230214.963999-1-khaled.almahallawy@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DSC 12 slices configuration is used for some specific cases with
Ultrajoiner. This can be supported only when each of the 4 joined pipes
have 3 DSC engines each.
Add the missing check for 3 DSC engines support before using 3 DSC
slices per pipe.
Fixes: be7f5fcdf4 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414024256.2782702-3-ankit.k.nautiyal@intel.com
(cherry picked from commit da9b1c61e7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DSC 12 slices configuration is used for some specific cases with
Ultrajoiner. This can be supported only when each of the 4 joined pipes
have 3 DSC engines each.
Add the missing check for 3 DSC engines support before using 3 DSC
slices per pipe.
Fixes: be7f5fcdf4 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414024256.2782702-3-ankit.k.nautiyal@intel.com
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmf5ExAACgkQ+mJfZA7r
E8rS+Qf/WVswQAzNmDQxSBYvZJl7PFzk0zgrTTixwz8ePDezcnEE/+7VsMuQ3ZY+
k/7uve2WApoRAh8Z4+rpxHu/x3F4fI8oWXXt9Ug7f0OwVlKz4cgE5ax04m+90wqu
j7N5NZcGwMUEPR192GZqALxzSaWsRhPH0p8A32f9PU/Tq1+UTSEwwaMKDIRdmtiR
VHU8rS694tuXXuGoHiHOPMYDacxyQE7XRyTqaBaBvMQrjgbc+ZqcdG+b+Mnp3t6N
GIs4CkT6UkDEpnovA66FSiBWLBkrnNFfnyO5WEUbR13CB459XpwB0as8o2HW85oT
Q6Nui8w3ZeaGUi6U764fNm/FxFh4vw==
=3VwH
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-04-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
Move more display specific parts of GPU error logging behind the display
snapshot interface.
With the display register capture reduced to just one register, DERRMR,
there's quite a bit of boilerplate here. However, it's still a nice
abstraction and removes a DISPLAY_VER() usage from core i915. With this
approach, it's also easy to add to xe as needed.
v2: Remove stale comment
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/13206969df04426d290d2863dc574e22ca45193a.1744630147.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Have chv_data_lane_soft_reset() get/put dpio internally, and use a
locked version of it within intel_dpio_phy.c. This drops the dependency
on vlv sideband from g4x_dp.c and g4x_hdmi.c, and makes that a DPIO PHY
implementation detail.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250411102715.613082-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to Bspec VRR_CTL_IGN_MAX_SHIFT doesn't exist for MTL and
onwards. On LunarLake and onwards Bit 30 is "Mask Block PkgC" instead. Stop
writing the bit for MeteorLake and onwards
v2: "Ignore Max Shift" bit doesn't exist on MeteorLake either
Bspec: 50508, 68925
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250409054909.968531-1-jouni.hogander@intel.com
We no longer need i915_drv.h in intel_pch.c, and we no longer need
intel_pch.h universally.
With intel_pch.h being included from intel_display_core.h, it's still
included pretty much everywhere, but there's no need to include it
explicitly from i915_drv.h or xe_device_types.h.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/68ec70f6880b7af19bc93b9817959299634a555d.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that intel_pch lives under display, let's begin its
conversion towards struct intel_display.
Move the pch_type to inside intel_display and convert the
callers.
While doing it, sort intel_display_core.h include list
alphabetically.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/8ffe86eb2a02153e3f866a81fb6dc8a3327a0f25.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The only usage of the "PCH" infra is to detect which South Display
Engine we should be using. Move it under display so we can convert
all its callers towards intel_display struct later.
No functional or code change.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/041e3dee494aa15c22172360f2bdd9b15e4acb00.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to our internal spec we need to now check if both
panel luminance and smooth brightness are available in panel for
us to be able to change brightness using luminance value.
--v2
-Add Fixes tag [Ankit]
Fixes: 6448149792 ("drm/i915/backlight: Check Luminance based brightness control for VESA")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250411060235.2732060-3-suraj.kandpal@intel.com
Turns out we've added two similar debugfs files. Consolidate on
intel_display_caps as it has more info and a driver independent name.
IGT has already switched over to intel_display_caps in IGT commit
cf837fc17d6c ("lib/dsc: use intel_display_caps instead of
i915_display_capabilities").
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/241c5886cf2e95c694a693bb1b1953f6ae15390e.1744295009.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We are applying the combo PLL frac w/a to all TGL+ platforms, except
RKL. I *think* all RKL machines use a 24 MHz refclk (certainly all
machines in our CI do) and so technically never need the adjustment.
But let's assume the hardware is exactly the same anyway and simplify
the code by applying the w/a to all TGL+ platforms.
v2: Keep the 38.4 MHz check
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250402171720.9350-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
DG1 apparently needs the combo PLL fractional divider w/a
with 38.4 MHz refclk as well. This isn't listed in bspec, but
looking at the hsd it looks like it was possibly just missed
due to no one having a DG1 around at the time.
This gives us slightly more accurate clocks on DG1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250401163752.6412-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Going forward, struct intel_display is the main display device data
pointer. Convert the i9xx_wm.h interface to struct intel_display.
With this, we can make intel_wm.c independent of i915_drv.h.
v2: Also remove i915_drv.h, fix commit message
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/3e30634d85c0e0aac9c95f9a2f928131ba400271.1744119460.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unify the naming of the data and clock lane timing parameters, and
simplify their bounds checks. Drop the debug messages on out of bounds
parameters as excessive.
Clarify the comment while at it.
Cc: William Tseng <william.tseng@intel.com>
Reviewed-by: William Tseng <william.tseng@intel.com>
Tested-by: William Tseng <william.tseng@intel.com>
Link: https://lore.kernel.org/r/d1a75ae7b9d93a0b50976b5de45ba2ca798991ad.1743682608.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The history of why the max of VBT clock and data lane prepare timing
parameter is used for both instead of each individually is
unknown. Separate them to follow what the Windows driver does.
Cc; William Tseng <william.tseng@intel.com>
Reviewed-by: William Tseng <william.tseng@intel.com>
Tested-by: William Tseng <william.tseng@intel.com>
Link: https://lore.kernel.org/r/079a26d0aae79f299aee0397dad2d6519cd55071.1743682608.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_dp::mst.active_links actually indicates the number of MST streams,
not the number of MST links (one MST link carrying one or more MST
streams), rename the field accordingly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-7-imre.deak@intel.com
It's not clear which encoder intel_dp_mst_encoder_active_links() refers
to (primary/stream), but there is also no reason to call the queried
property an encoder property; remove encoder from the name. Also it's
the number of MST streams being queried, vs. the number of MST links
(there is one MST link carrying one or more MST streams), so rename link
to stream as well.
While at it pass intel_dp to the function, which is more logical and
makes it easier to re-use the function later (without the need to get
the digital port pointer).
Also move the function earlier, next to the related ones.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
There doesn't seem to be a reason to assert for a non-negative stream
counter in intel_dp_check_mst_status() in particular, remove it. There
is now an equivalent assert in intel_dp_mst_dec_active_streams().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-4-imre.deak@intel.com
Add helpers to increment/decrement the active MST stream count, instead
of open-coding these.
In mst_stream_pre_enable(), the increment will happen earlier, this is
ok, since nothing depends on the counter between the two points.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-3-imre.deak@intel.com
The intel_dp::link_trained flag indicates whether the link is active,
regardless of whether the link training passed or failed. For clarity
rename the flag to 'active'. While at it move the flag under
intel_dp::link.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
Some SKUs of Xe2_HPD platforms (such as BMG) have GDDR memory type
with ECC enabled. We need to identify this scenario and add a new
case in xelpdp_get_dram_info() to handle it. In addition, the
derating value needs to be adjusted accordingly to compensate for
the limited bandwidth.
Bspec: 64602
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 3adcf970dc ("drm/xe/bmg: Drop force_probe requirement")
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324-tip-v2-1-38397de319f8@intel.com
(cherry picked from commit 327e30123c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.
At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.
Reject HBR3 when TPS4 supports is unavailable on the sink.
v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210740.11886-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 38188a7f57)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Turns out LNL+ and BMG+ no longer have the weird extra scanline
offset for HDMI outputs. Fix intel_crtc_scanline_offset()
accordingly so that scanline evasion/etc. works correctly on
HDMI outputs on these new platforms.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207215406.19348-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit fede97b72b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If there are no changes to intel_crtc_can_enable_sagv() there
is no need to do all the sagv bw_state recomputation.
The only slight caveat here is hw state takeover where we
initially disable SAGV, and want it to get re-enabled once
we've determined that it's safe to do so. That can now be
achieved by having intel_crtc_can_enable_sagv() reject SAGV
as long as the crtc_state->inherited flag is set. Once the
flag gets cleared (during initial commit for inactive pipes,
during the first userspace commit for active pipes), we
will naturally recompute all the sagv related state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Now that all the sagv computation has been moved from the
skl+ watermark code into intel_bw_atomic_check() there is
no point in calling intel_bw_modeset_checks() before the
wm computation. Hide it within intel_bw_atomic_check().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The only thing between the current intel_bw_check_sagv_mask() call
site and intel_bw_atomic_check() is skl_wm_add_affected_planes()
which no longer depends on the sagv mask, so we can make life
a lot less confusing by calling intel_bw_check_sagv_mask() from
intel_bw_atomic_check() instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move the bw_state->pipe_sagv_reject computation into intel_bw.c
where it belongs.
Previously we had a complicated dance between watermarks and
sagv which required this to be computed earlier, but that was
changed in commit 5e8146251f7b ("extract intel_bw_check_sagv_mask()")
which allows the whole thing to be cleaned up quite a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to use the crtc_state->inherited flag to clean up some
of the early SAGV handling. To make that work nicely I need to
flag even the inactive crtcs as "inherited".
Since we can't expect user space to perform any real commits
on inactive crtcs we'll clear the flag already during
initial_commit().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently intel_bw_calc_min_cdclk() always adds the bw_state
to the atomic state. Not only does it result in potentially
redundant work later, it's also currently causing unwanted cdclk
changes during driver load.
Check if the dbuf bw is actually changing before we decide to
pull in the bw state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_bw_crtc_min_cdclk() only depends on the pipe data rate,
which we already have stashed in bw_state->data_rate[]. So
stashing the resulting min_cdclk[] as well is redundant. Get
rid of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.
At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.
Reject HBR3 when TPS4 supports is unavailable on the sink.
v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210740.11886-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We are seeing timeouts in opening CRC fd when testing on setup where DP
Panel Replay can be enabled. Fix these by checking if CRC is enabled for DP
Panel Replay as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250331090747.2964028-1-jouni.hogander@intel.com
Now that we have intel_ggtt_read_entry() we can easily read out the
first PTE of the BIOS FB and verify that it looks correct. We'll
also use the extracted dma address to figure out where in stolen
the FB lives (so far we've just assumed that it sits at offset 0,
and in practice that does seem to be true, but better safe than
sorry).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313140838.29742-7-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Forward declare struct drm_printer instead of including drm/drm_print.h,
as we only need the pointer. Turns out quite a few places depend on this
include implicitly. Make them explicit.
Some of the includes are just stale and unnecessary. Group the forward
declarations together while at it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250326115452.2090275-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Disable FBC compressor clock gating before enabling FBC and
clear it after disabling FBC.
v2: update the DG2 registers for this wa
v3: use local variable and single line reg definition (Jani)
Bspec: 74212, 72197, 69741, 65555
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250330172616.718188-1-vinod.govindapillai@intel.com
We have now seen this:
<4> [2120.434153] i915 0000:00:02.0: [drm] drm_WARN_ON(psr->paused)
<4> [2120.434196] WARNING: CPU: 3 PID: 4430 at drivers/gpu/drm/i915/display/intel_psr.c:2227 intel_psr_pause+0x16e/0x180 [i915]
Comment for drm_WARN_ON(display->drm, psr->paused) in intel_psr_pause says:
"If we ever hit this, we will need to add refcount to pause/resume"
This patch is implementing PSR pause/resume refcount.
v3: Incorporate changes missing from v2
v2: Add drm_warn for detecting possible unbalanced pause/resume
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250328080623.1183669-1-jouni.hogander@intel.com
For platforms that always use VRR Timing Generator, the VTOTAL.Vtotal
bits are not required. Since the support for these bits is going to
be deprecated in upcoming platforms, avoid writing these bits for the
platforms that do not use legacy Timing Generator.
Since for these platforms vrr.vmin is always filled with crtc_vtotal,
use TRAN_VRR_VMIN to get the vtotal for adjusted_mode.
v2: Avoid having a helper for manipulating VTOTAL register, and instead
just make the change where required. (Ville)
v3: Set crtc_vtotal instead of working with the bits directly (Ville).
Use intel_vrr_vmin_vtotal() to set the vtotal during readout. (Ville)
v4: Keep the reading part unchanged, and let it get overwritten for
cases where we use vrr.vmin. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250327144629.648306-3-ankit.k.nautiyal@intel.com
Introduce a new helper to check transcoder_has_vrr() and use
that to exclude transcoders which do not support VRR.
v2: Include HAS_VRR into the helper. (Ville)
v3: Drop the usage in places where not applicable. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250327144629.648306-2-ankit.k.nautiyal@intel.com
This change is to avoid over-specification of the TEOT timing
parameter, which is derived from software in current design.
Supposed that THS-TRAIL and THS-EXIT have the minimum values,
i.e., 60 and 100 in ns. If SW is overriding the HW default,
the TEOT value becomes 150 ns, approximately calculated by
the following formula.
DIV_ROUND_UP(60/50)*50 + DIV_ROUND_UP(100/50))*50/2, where 50
is LP Escape Clock time in ns.
The TEOT value 150 ns is larger than the maximum value,
around 136 ns if UI is 1.8ns, (105 ns + 12*UI, defined by MIPI
DPHY specification).
However, the TEOT value will meet the specification if THS-TRAIL
is set to the HW default, instead of software overriding.
The timing change is made for both data lane and clock lane.
v1: initial version.
v2: change clock lane dphy timings.
v3: remove calculation of trail cnt.
v4: rebase.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13891
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: William Tseng <william.tseng@intel.com>
Acked-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://lore.kernel.org/r/20250311100626.533888-1-william.tseng@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On ILK-IVB only PCH outputs use shared dplls. Move the relevant
intel_disable_shared_dpll() into ilk_pch_post_disable() to make
that clear (and if we extend the dpll mgr to cover all plls we need
different enable/disable points anyway for the PCH vs. CPU eDP cases).
The intel_enable_shared_dpll() counterpart was already in
ilk_pch_enable() anyway, so this is the more symmetric place for the
disable as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we loop over all joined pipes and enable/disable the
shared dplls for each. We don't really have to do that since
all joined pipes will be using the same dpll. So let's just do
the enable/disable once for the whole set of joined pipes.
We can still keep tracking the dpll active set as pipes as long
as we remember to flip the bits for all the joined pipes on one go.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We now always set vrr.flipline, vmin, and vmax for all platforms that
support VRR. Therefore, we should set all TRANS_VRR_CTL bits except
VRR_ENABLE. Without this, the readback for these bits will fail because we
only read vrr.flipline, vmin, and vmax if TRANS_VRR_CTL has the
FLIPLINE_EN bit set.
For platforms that always have the VRR Timing Generator enabled,
the FLIPLINE_EN bit is always set in TRANS_VRR_CTL during
intel_transcoder_vrr_enable(). However, for the remaining platforms
(that do not always have the VRR Timing Generator enabled) if a full
modeset doesn't occur and VRR is not enabled, the bit is not set.
This results in a mismatch between the software state and hardware state
because the software state expects VRR timings like flipline, vmin, and
vmax to be set, but the readout for these doesn't happen since the
FLIPLINE_EN bit is not set in TRANS_VRR_CTL.
To avoid this mismatch, write trans_vrr_ctl in
intel_vrr_set_transcoder_timings() even when VRR is not enabled
for platforms that do not have the VRR Timing Generator always enabled.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-15-ankit.k.nautiyal@intel.com
Currently, the VRR timing generator is used only when VRR is enabled by
userspace for sinks that support VRR. Starting with PTL+, gradually move
away from the legacy timing generator and use the VRR timing generator
for both variable and fixed timings.
Note: For platforms where we always enable the VRR timing generator,
the LRR fastset is not allowed to avoid live programming of vrr.guardband
with VRR TG enabled. This effectively breaks the LRR fastset functionality
for these platforms and needs to be addressed.
v2: Use this for PTL for now to avoid losing LRR fastset for older
platforms. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-14-ankit.k.nautiyal@intel.com
VRR with joiner is currently disabled as it still needs some work to
correctly sequence the primary and secondary transcoders. However, we can
still use VRR Timing generator in fixed refresh rate for joiner and since
it just need to program vrr timings once and does not involve changing
timings on the fly. We still need to skip the VRR and LRR for joiner.
To achieve this set vrr.in_range to 0 for joiner case, so that we do not
try VRR and LRR for the joiner case.
v2: Avoid checks for secondary pipes, where not required. (Ville)
v3: Remove a redundant check and reset vrr.in_range to false. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-13-ankit.k.nautiyal@intel.com
Since the vrr.guardband can now change for platforms that always use the
VRR Timing Generator, and it is unsafe to reprogram the guardband on the
fly, move the guardband and pipeline_full checks from the pure !fastboot
path and add a check for intel_vrr_always_use_vrr_tg().
For older platforms the vrr.guardband change happens when VRR Timing
generator is off. For the platforms that always use the VRR Timing
Generator, this will prevent reprogramming the vrr.guardband without a
full modeset. However, this will disrupt LRR functionality for these
platforms.
v2: Modify the check to avoid breaking the LRR on older platform.
(Ville)
v3: Correct the oversight of not removing the lines from the original
location. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-12-ankit.k.nautiyal@intel.com
For fixed refresh rate use fixed timings for all platforms that support
VRR. For this add checks to avoid computing and reading VRR for
platforms that do not support VRR.
v2: Avoid touching check for VRR_CTL_FLIP_LINE_EN. (Ville)
v3: Avoid redundant statements in vrr_{compute/get}_config. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-10-ankit.k.nautiyal@intel.com
During modeset enable sequence, program the fixed timings, and turn on the
VRR Timing Generator (VRR TG) for platforms that always use VRR TG.
For this intel_vrr_set_transcoder now always programs fixed timings.
Later if vrr timings are required, vrr_enable() will switch
to the real VRR timings.
For platforms that will always use VRR TG, the VRR_CTL Enable bit is set
and reset in the transcoder enable/disable path.
v2: Update intel_vrr_set_transcoder_timings for fixed_rr.
v3: Update intel_set_transcoder_timings_lrr for fixed_rr. (Ville)
v4: Have separate functions to enable/disable VRR CTL
v5:
-For platforms that do not always have VRRTG on, do write bits other
than enable bit and also use write the TRANS_VRR_PUSH register. (Ville)
-Avoid writing trans_ctl_vrr if !vrr_possible().
v6:
-Disable VRR just before intel_ddi_disable_transcoder_func(). (Ville)
-Correct the sequence of configuring PUSH and VRR Enable/Disable. (Ville)
v7: Reset trans_vrr_ctl to 0 unconditionally in
intel_vrr_transcoder_disable(). (Ville)
v8: Reset trans_vrr_ctl if flipline is not set. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-9-ankit.k.nautiyal@intel.com
For platforms that enable VRR TG only for variable timings, the
VRR_CTL.VRR_ENABLE bit indicates VRR is active. For platforms that
always have VRR TG enabled, the VRR_CTL.VRR_ENABLE bit indicates VRR
is active only when not in fixed refresh rate mode.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-8-ankit.k.nautiyal@intel.com
For platforms for which vrr timing generator is always set, VRR_CTL
enable bit does not need to toggle, so modify the vrr_{enable/disable}
for this.
At the moment the helper intel_vrr_always_use_vrr_tg() return false for
all cases. This will be set later when all other bits are in place.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-7-ankit.k.nautiyal@intel.com
LRR and Vmax can be computed only if VRR is supported and vrr.in_range
is set. Currently we proceed with vrr timings only for VRR supporting
panels and return otherwise. For using VRR TG with fix timings, need to
continue even for panels that do not support VRR.
To achieve this, refactor the condition for computing vmax and
update_lrr so that we can continue for fixed timings for panels that do
not support VRR.
v2: Set vmax = vmin for non VRR panels. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-6-ankit.k.nautiyal@intel.com
In intel_post_plane_update() there are things which might need to do
vblank waits, so enabling PSR as early as we do now is simply
counter-productive. Therefore move intel_psr_post_plane_update() at the
last of intel_post_plane_update().
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-5-ankit.k.nautiyal@intel.com
Currently the variable timings are supported only for DP and eDP and not
for DP MST. Call intel_vrr_compute_config() for MST which will configure
fixed refresh rate timings irrespective of whether VRR is supported or
not. Since vrr_capable still doesn't have support for DP MST this will be
just treated as non VRR case and vrr.vmin/vmax/flipline will be all set
to adjusted_mode->crtc_vtotal.
This will help to move away from the legacy timing generator and
always use VRR timing generator by default.
With this change, we need to exclude MST in intel_vrr_is_capable for
now, to avoid having LRR with MST.
v2: Exclude MST in intel_vrr_is_capable() for now. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250324133248.4071909-3-ankit.k.nautiyal@intel.com
Currently VRR is not supported with HDMI, but we can still leverage
the VRR Timing Generator to achieve a fixed refresh rate.
Call intel_vrr_compute_config() for HDMI which will handle the vrr
timings to have fixed refresh rate with VRR Timing Generator.
v2: Improve commit message. (Ville).
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> (#v1)
Link: https://lore.kernel.org/r/20250324133248.4071909-2-ankit.k.nautiyal@intel.com
The HDMI vs. not scanline offset stuff no longer applies to the
latest platforms, so using HAS_DDI() is a bit confusing. Replace
with a more specific set of conditions.
Also let's just deal with the platform types in the if ladder
itself, and handle the HDMI vs. not within the specific branch
for those platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207215406.19348-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
The Panel Power Sequencer lock held on an eDP port (a) blocks a DP AUX
transfer on another port (b), since the PPS lock is device global, thus
shared by all ports. The PPS lock can be held on port (a) for a longer
period due to the various PPS delays (panel/backlight on/off,
power-cycle delays). This in turn can cause an MST down-message request
on port (b) time out, if the above PPS delay defers the handling of the
reply to the request by more than 100ms: the MST branch device sending
the reply (signaling this via the DP_DOWN_REP_MSG_RDY flag in the
DP_DEVICE_SERVICE_IRQ_VECTOR DPCD register) may cancel the reply
(clearing DP_DOWN_REP_MSG_RDY and the reply message buffer) after 110
ms, if the reply is not processed by that time.
Avoid MST down-message timeouts described above, by locking the PPS
state for AUX transfers only if this is actually required: on eDP ports,
where the VDD power depends on the PPS state and on all DP and eDP ports
on VLV/CHV, where the PPS is a pipe instance and hence a modeset on any
port possibly affecting the PPS state.
v2: Don't move PPS locking/VDD enabling to a separate function. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250324180145.142884-3-imre.deak@intel.com
After a follow-up change on non-eDP outputs
intel_pps_vdd_{on,off}_unlocked() can be called without the PPS lock
held, allow for this.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250324180145.142884-2-imre.deak@intel.com
Some SKUs of Xe2_HPD platforms (such as BMG) have GDDR memory type
with ECC enabled. We need to identify this scenario and add a new
case in xelpdp_get_dram_info() to handle it. In addition, the
derating value needs to be adjusted accordingly to compensate for
the limited bandwidth.
Bspec: 64602
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 3adcf970dc ("drm/xe/bmg: Drop force_probe requirement")
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324-tip-v2-1-38397de319f8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There are two panel_replay scenarios fbc wa need to be aware of,
panel replay with and without selective update capability.
Panel replay without selective update don't have any fbc wa.
So keep the fbc psr1 wa as it is.
The current fbc psr2 wa is mainly about selective fetch and we
need to apply the fbc wa if selective fetch is on - irrespective
of panel replay. Hence we can't exclude panel replay from the
fbc psr2 wa.
v1: keep panel_replay exclusion in PSR1 case (Jouni)
Patch description updated
Bspec: 66624, 50442
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321094529.197397-3-vinod.govindapillai@intel.com
FBC was disabled in case PSR2 selective update in display 12 to
14 as part of a wa. From xe2lpd onwards there is a logic to be
implemented to decide between FBC and selective update. Until
that logic is implemented keep FBC disabled in case selective
update is enabled.
v1: updated patch description and some explanation and todo
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321094529.197397-2-vinod.govindapillai@intel.com
Starting from MTL we don't have a platform agnostic way to validate
DC6 state due to dc6 counter has been removed to validate DC state.
The goal is to validate that the display HW can reach the DC6 power
state. There is no HW DC6 residency counter (and there wasn't such
a counter earlier either), so an alternative way is required. According
to the HW team the display driver has programmed everything correctly in
order to allow the DC6 power state if the DC5 power state is reached
(indicated by the HW DC5 residency counter incrementing) and DC6 is
enabled by the driver.
Driver could take a snapshot of the DC5 residency counter right
after it enables DC6 (dc5_residency_start) and increment the SW
DC6 residency counter right before it disables DC6 or when user space
reads the DC6 counter. So the driver would update the counter at these
two points in the following way:
dc6_residency_counter += dc5_current_count - dc5_start_count
v2: Update the discription. (Imre)
Read dc5 count during dc6 enable and disable then and update
dc6 residency counter. (Imre)
Remove variable from dmc structure. (Jani)
Updated the subject title.
v3: Add i915_power_domains lock to updated dc6 count in debugfs. (Imre)
Use flags to check dc6 enable/disable states. (Imre)
Move the display version check and counter read/update to
a helper. (Imre)
Resize the variable length. (Rodrigo)
Use old dc6 debugfs entry for every platform. (Rodrigo)
v4: Remove superfluous whitespace. (Jani)
Read DMC registers in intel_dmc.c (Jani)
Rename dc6_en_dis to dc6_enabled and change its type to bool. (Jani)
Rename update_dc6_count and move it to intel_dmc.c (Jani)
Rename dc6_en_dis to start_tracking. (Imre)
Have lock for dc6 state read aswelll. (Imre)
Keep the existing way print 'DC5 -> DC6 count' along with
new 'DC6 Allowed Count' print. (Imre)
Add counters in intel_dmc struct. (Imre)
Have interface to return dc6 allowed count. (Imre)
Rename dc6_count to dc6_allowed_count. (Rodrigo)
v5: Rename counters and move in to dc6_allowed structure. (Imre)
Order declaration lines in decreasing line length. (Imre)
Update start_tacking logic. (Imre)
Move get couner inside lock and DISPLAY_VER code to helper. (Imre)
v6: Change intel_dmc_get_dc6_allowed_count return type to bool. (Imre)
Update debugfs print to better allien with old print. (Imre)
Remove braces at if/else for signle line statements. (Imre)
v7: Remove in line variable declaration. (Imre)
v8: Rebase the changes.
Signed-off-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321123707.287745-1-mohammed.thasleem@intel.com
Currently, vrr.enable is intended only for variable refresh rate timings.
At this point, we do not set fixed refresh rate timings, but the GOP can,
which creates a problem during the readback of vrr.enable.
The GOP enables the VRR timing generator with fixed timings, while the
driver only recognizes the VRR timing generator as enabled with
variable timings. This discrepancy causes an issue due to the
fixed refresh rate check during readback. Since the VRR timing generator
is enabled and we do not support fixed timings, the readback should set
vrr.enable so that the driver can disable the VRR timing generator.
However, the current check does not allow this.
Therefore, remove the fixed refresh rate check during readback.
Fixes: 27217f9d18 ("drm/i915/vrr: Track vrr.enable only for variable timing")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322044345.3827137-3-ankit.k.nautiyal@intel.com
Add fixed refresh rate mode in crtc_state dump.
VRR Timing Generator is running in fixed refresh rate mode when
vrr.vmin = vrr.vmax = vrr.flipline.
v2: s/fixed_rr/fixed rr for consistency with the other stuff. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322044345.3827137-2-ankit.k.nautiyal@intel.com
Some DSI panel vendors end up hardcoding PPS params because of which
it does not listen to the params sent from the source. We use the
default config tables for DSI panels when using DSC 1.1 rather than
calculate our own rc parameters.
--v2
-Use intel_crtc_has_type [Jani]
--v4
-Use a function to check Mipi dsi dsc 1.1 condition [Ankit]
-Add documentation for using this condition [Ankit]
-Rebase
--v5
-Pass only the crtc_state [Jani]
-Fixup the comment [Jani]
-Check for dsc major version [Jani]
-Use co-developed-by tag [Jani]
--v6
-Add more definition of the issue and solution in the comment [Ankit]
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13719
Co-developed-by: William Tseng <william.tseng@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228152531.403026-1-suraj.kandpal@intel.com
Convert intel_atomic_commit() and intel_atomic_commit_tail() to use
display runtime PM interfaces. Also convert the wakeref member type to
struct ref_tracker *, which is the same as intel_wakeref_t, but without
the typedef.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/2682fa92089ab87429eef4d45f931839f0d32077.1742483007.git.jani.nikula@intel.com
Add display specific wrappers around the i915 and xe dedicated runtime
PM interfaces. There are no conversions here, just the wrappers.
Implement with_intel_display_rpm() without needing to provide a local
variable, which neatly narrows the scope and hides the type of the
wakeref cookie.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/086b312367fa0fbd8de92e9764117aa7ff4a8cc5.1742483007.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_display_irq.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/b6e281875278ad84772938f81129fde6065b2745.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert the external interfaces of intel_display_irq.[ch] to
struct intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/83b552154761d2790d8c774707e8d7612037bdf5.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_hotplug_irq.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/8ddf27ea31b543f88c5f124f029c2eaa06a9aae7.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_hotplug.[ch] to struct
intel_display.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cf382dbfacf1445b26fbe1e7c011e7a3ea6e1594.1742481923.git.jani.nikula@intel.com
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_connector.c to struct
intel_display. i915_inject_probe_failure() remains the only call that
requires i915 pointer.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/398e3210459a65f74e78f2d34584cda6eea6a99b.1742481923.git.jani.nikula@intel.com
In file included from <command-line>:
./drivers/gpu/drm/i915/display/intel_fbdev.h: In function ‘intel_fbdev_framebuffer’:
./drivers/gpu/drm/i915/display/intel_fbdev.h:32:16: error: ‘NULL’ undeclared (first use in this function)
32 | return NULL;
| ^~~~
./drivers/gpu/drm/i915/display/intel_fbdev.h:1:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
+++ |+#include <stddef.h>
1 | /* SPDX-License-Identifier: MIT */
./drivers/gpu/drm/i915/display/intel_fbdev.h:32:16: note: each undeclared identifier is reported only once for each function it appears in
32 | return NULL;
| ^~~~
Build fails if CONFIG_DRM_FBDEV_EMULATION is n, add missing header file.
Fixes: 9fa154f40e ("drm/{i915,xe}: Run DRM default client setup")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250315120143.2344958-1-yuehaibing@huawei.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 97e81f78d3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently, during the computation of global watermarks, the latency for
each scaler user is calculated to compute the DSC prefill latency.
At this point, the number of scaler users can exceed the number of
supported scalers, which is checked later in intel_atomic_setup_scalers().
This can cause issues when the number of scaler users exceeds the number
of supported scalers.
While checking for DSC prefill, ensure that the number of scaler users does
not exceed the number of supported scalers.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4341
Fixes: a9b14af999 ("drm/i915/dsc: Check if vblank is sufficient for dsc prefill")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227034106.1638203-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 5d6c69b712)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In file included from <command-line>:
./drivers/gpu/drm/i915/display/intel_fbdev.h: In function ‘intel_fbdev_framebuffer’:
./drivers/gpu/drm/i915/display/intel_fbdev.h:32:16: error: ‘NULL’ undeclared (first use in this function)
32 | return NULL;
| ^~~~
./drivers/gpu/drm/i915/display/intel_fbdev.h:1:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’?
+++ |+#include <stddef.h>
1 | /* SPDX-License-Identifier: MIT */
./drivers/gpu/drm/i915/display/intel_fbdev.h:32:16: note: each undeclared identifier is reported only once for each function it appears in
32 | return NULL;
| ^~~~
Build fails if CONFIG_DRM_FBDEV_EMULATION is n, add missing header file.
Fixes: 9fa154f40e ("drm/{i915,xe}: Run DRM default client setup")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250315120143.2344958-1-yuehaibing@huawei.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Update intel_bw.c internally use intel_display. Conversion of the public
interface will come as a follow-up.
v2:
- Prefer intel_uncore_read() for MCHBAR registers. (Ville)
v3:
- Remove the unnecessary inclusion of intel_de.h after changes from
v2. (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311-xe3lpd-bandwidth-update-v5-1-a95a9d90ad71@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
MSA Ignore Timing PAR enable is set in the DP sink when we enable variable
refresh rate.
Currently for link training we depend on flipline to decide whether we
want to ignore the msa timings. With fixed refresh rate we will still
fill the flipline in all cases whether panel supports VRR or not.
Change the condition for link training to ignore the msa timings if
vrr.in_range.
v2: Add more documentation and a #TODO for readout of vrr.in_range.
(Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311093751.1329043-9-ankit.k.nautiyal@intel.com
Currently we always compute the timings as if vrr is enabled.
With this approach the state checker becomes complicated when we
introduce fixed refresh rate mode with vrr timing generator.
To avoid the complications, instead of always computing vrr timings, we
compute vrr timings based on uapi.vrr_enable knob.
So when the knob is disabled we always compute vmin=flipline=vmax.
v2: Use actual timings without any adjustments while preparing for
fixed timings in compute_config. (Ville)
v3: Avoid setting fixed timings if !vrr_possible().
v4: Move vmin adjustement after all other timings are complete. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (#v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20250311093751.1329043-8-ankit.k.nautiyal@intel.com
To have fixed refresh rate with VRR timing generator the
guardband/pipeline full can't be programmed on the fly. So we need to
ensure that the values satisfy both the fixed and variable refresh
rates.
Since we compute these value based on vmin, lets set the vmin to
crtc_vtotal for both fixed and variable timings instead of using the
current refresh rate based approach. This way the guardband remains
sufficient for both cases.
v2: Avoid using vblank delay while computing vtotal, as this comes into
the picture later. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311093751.1329043-7-ankit.k.nautiyal@intel.com
Since CMRR is now disabled, use the flag vrr.enable to tracks if vrr timing
generator is used with variable timings.
Avoid setting vrr.enable for CMRR and adjust readout to not set vrr.enable
when vmax == vmin == flipline (fixed refresh rate timing).
v2: Use intel_vrr_vmin_flipline() to account for adjustments required
for icl/tgl. (Ville)
v3: Add a #TODO for handling I915_MODE_FLAG_VRR better for CMRR. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311093751.1329043-6-ankit.k.nautiyal@intel.com
Switching between variable and fixed timings is possible as for that we
just need to flip between VRR timings. However for CMRR along with the
timings, few other bits also need to be changed on the fly, which might
cause issues. So disable CMRR for now, till we have variable and fixed
timings sorted out.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311093751.1329043-5-ankit.k.nautiyal@intel.com
Currently, during the computation of global watermarks, the latency for
each scaler user is calculated to compute the DSC prefill latency.
At this point, the number of scaler users can exceed the number of
supported scalers, which is checked later in intel_atomic_setup_scalers().
This can cause issues when the number of scaler users exceeds the number
of supported scalers.
While checking for DSC prefill, ensure that the number of scaler users does
not exceed the number of supported scalers.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4341
Fixes: a9b14af999 ("drm/i915/dsc: Check if vblank is sufficient for dsc prefill")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227034106.1638203-1-ankit.k.nautiyal@intel.com
intel_hpd_disable/enable() have the same purpose as
intel_hpd_block/unblock(), except that disable/enable will drop any HPD
IRQs which were triggered while the HPD was disabled, while
block/unblock will handle such IRQs after the IRQ handling is unblocked.
Use intel_hpd_block/unblock() for crt as well, by adding a helper to
explicitly clear any pending IRQs before unblocking.
v2:
- Handle encoders without a port assigned to them.
- Rebase on change in intel_hpd_suspend() documentation.
v3:
- Rebase on the suspend/resume -> block/unblock rename change.
- Clear the pending events only after all encoders have unblocked the
HPD handling.
- Clear the short/long port events for all encoders using the given HPD
pin.
v4:
- Rebase on port->hpd_pin tracking. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304152917.3407080-7-imre.deak@intel.com
After link training - both in case of a passing and failing LT result -
a work is scheduled to check the link state. This check should take
place after the link training is completed by disabling the link
training pattern and setting intel_dp::link_trained=true. Atm, the work
is scheduled before these steps, which may result in checking the link
state too early (and thus not retraining the link as expected).
Fix the above by scheduling the link check work after link training is
complete.
v2:
- Add MAX_SEQ_TRAIN_FAILURES instead of open-coding it. (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305114820.3523077-2-imre.deak@intel.com
During Display Port link training the handling of HPD pulses should be
prevented, as that handling can interfere with the link training:
- Accessing DPCD registers outside the range of link training registers
are not allowed by the Standard (see DP Standard v2.1, 3.5.2.16.1,
3.6.6.1). The pulse handler reads the DPRX capability registers, which
are outside of the allowed range.
- Switching of the LTTPR transparent/non-transparent mode may reset the
LTTPRs on the link, thus aborting any ongoing link training. The pulse
handler does set the LTTPR mode, thus it could unexpectedly abort the
ongoing link training.
Block/unblock the HPD pulse handling for the duration of the link
training to prevent the above DPCD register accesses / LTTPR mode
change.
Apart from the above scenarios, there are other ways a non-link training
DPCD register could be accessed during link training: via the DRM AUX
device node, or via DPCD register probing (as performed by
drm_dp_dpcd_probe()). These will be addressed by a follow-up change.
v2: Rebase on the intel_hpd_suspend/resume -> intel_hpd_block/unblock()
rename change.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304152917.3407080-5-imre.deak@intel.com
Add support for blocking the IRQ handling on the HPD pin of a given
encoder, handling IRQs that arrived while in the blocked state after
unblocking the IRQ handling. This will be used by a follow-up change,
which blocks/unblocks the IRQ handling around DP link training.
This is similar to the intel_hpd_disable/enable() functionality, by also
handling encoders/ports with a pulse handler (i.e. also
blocking/unblocking the short/long pulse handling) and handling the IRQs
arrived in the blocked state after the handling is unblocked (vs. just
dropping such IRQs).
v2:
- Handle encoders without a port assigned to them.
- Fix clearing IRQs from intel_hotplug::short_port_mask.
v3:
- Rename intel_hpd_suspend/resume() to intel_hpd_block/unblock(). (Jani)
- Refer to HPD pins as hpd_pin vs. hpd.
- Flush dig_port_work in intel_hpd_block() if any encoder using the HPD
pin has a pulse handler.
v4:
- Fix hpd_pin_has_pulse(), checking the encoder's HPD pin.
v5:
- Rebase on port->hpd_pin tracking. (Ville)
v6: (Jani)
- Add hpd_pin_is_blocked() helper.
- Use the hpd_pin_mask term for a mask of pins instead of hpd_pins.
- Prevent decrementing a 0 refcount in unblock_hpd_pin().
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305114820.3523077-1-imre.deak@intel.com
After suspending and resuming the detection on connectors, HPD IRQs that
arrived while the detection was suspended, are handled by scheduling the
intel_hotplug::hotplug work for them. All HPD pins must be at this point
in either the HPD_ENABLED (set for all pins during driver loading/system
resuming) or HPD_MARK_DISABLED (set by IRQ storm detection) state: the
HPD_DISABLED state for a pin can be set only from the HPD_MARK_DISABLED
state by the hotplug work after a storm detection (enabling polling on
the given pin/connector), however the hotplug work won't be scheduled
while the detection is suspended.
A follow-up change will add support for blocking the HPD IRQ handling
on a given HPD pin (without disabling the IRQ generation on it), after
which it becomes possible to see a pin in the HPD_DISABLED state when
unblocking the IRQ handling (since the blocking could've happened for an
already disabled pin). Adjust queue_work_for_missed_irqs() accordingly,
so that this function can be reused for unblocking the IRQ handling.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304152917.3407080-3-imre.deak@intel.com
Track the HPD pin instead of the corresponding encoder ports for pending
short/long HPD pulse events. This is how the pending hotplug events are
tracked and there is no reason for tracking the pulse events differently.
After this change intel_hpd_trigger_irq() will set the short pulse event
pending for all encoders using the given HPD pin. This doesn't change
the behavior, as atm in case of multiple (2) encoders sharing the same
pin only one will have a pulse handler, so for other encoders without a
pulse handler the event is ignored. Also setting the pulse event pending
for all encoders using the HPD pin is what happens after an actual HPD
IRQ, the effect of calling intel_hpd_trigger_irq() should match this.
In a following change this also makes it simpler to block the handling
of a short/long pulse event on an HPD pin for all the encoders using
this HPD pin.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304152917.3407080-2-imre.deak@intel.com
In Xe3_LPD, display audio has the core audio logic located in PG0 and
per-transcoder logic in the same power well that provides power for the
transcoder [1].
For stuff like audio device enumeration, we need to ensure that PG0 is
turned on. For playback, we additionally need the transcoder's power
well to be enabled.
That essentially means that, for audio playback, there isn't a special
power well that needs to be enabled, because modeset sequences will
ensure that the required power wells are enabled.
That said, there might be cases where PG0 could be disabled due to
display entering DC6 while the audio driver tries to interact with the
graphics driver for stuff like audio device enumeration.
We recently hit that kind of scenario, where "aplay -l" was being used
to enumerate audio devices on a PTL machine with PSR enabled and no
external displays attached.
Since intel_audio_component_get_power() uses
POWER_DOMAIN_AUDIO_PLAYBACK, make sure to map that power domain to
DC_off power well, so that we disable dynamic DC states (which includes
DC6) while the audio driver needs display audio power.
[1] The core-audio vs per-transcoder logic split is not really new in
Xe3_LPD. This is also true for previous display generations. We need
to figure out the correct version where this split happened so that
we can apply fixes in the current power domain mapping.
Bspec: 72519
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-xe3lpd-power-domain-audio-playback-v1-1-5765f21da977@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Move the dbuf_state readout parts into skl_wm_get_hw_state()
so that the details are better hidden from sight.
This will stop updating this on pre-skl, but that's what we want
since the dbuf state is only used on skl+.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-18-ville.syrjala@linux.intel.com
Move the wm readout to happen earlier. This is needed because
the bw_state readout will need ddb information populated by
the wm readout.
For now limit this to skl+ as I've not really analyzed the
implications of doing this on other platforms.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-17-ville.syrjala@linux.intel.com
I'll need to move the wm readout to an earlier point in the
sequence (since the bw state readout will need ddb information
from the wm readout). But (at least for now) the wm sanitation
will need to stay put as it needs to also sanitize things for
any pipes/planes we disable later during the hw state takeover.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-16-ville.syrjala@linux.intel.com
Instead of hand rolling the cdclk state disabling for a
pipe in noatomic() let's just recompute the whole thing
from scratch. Less code we have to remember to keep in sync.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-15-ville.syrjala@linux.intel.com
intel_crtc_calculate_min_cdclk() can't return an error
(since commit 5ac860cc52 ("drm/i915: Fix DBUF bandwidth vs.
cdclk handling")) so there is no point in checking for one.
Also we can just call it unconditionally since it itself
checks crtc_state->hw.enabled. We are currently checking
crtc_state->hw.active in the readout path, but active==enabled
during readout, and arguably enabled is the more correct thing
to check anyway.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-14-ville.syrjala@linux.intel.com
We only compute bw_state->data_rate and bw_state->num_active_planes
on icl+. Do the same during readout so that we don't leave random
junk inside the state.
v2: Skip the whole intel_bw_crtc_update() (Vinod)
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-13-ville.syrjala@linux.intel.com
Hoist the bw stuff into a separate function from
intel_modeset_readout_hw_state() so that the details
are better hidden inside intel_bw.c.
We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-11-ville.syrjala@linux.intel.com
Hoist the bw stuff into a separate function from
intel_crtc_disable_noatomic_complete() so that the details
are better hidden inside intel_bw.c.
We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-9-ville.syrjala@linux.intel.com
Add skl_wm_plane_disable_noatomic() which will clear out all
the ddb and wm state for the plane. And let's do this _before_
we call plane->disable_arm() so that it'll actually clear out
the state in the hardware as well.
Currently this won't do anything new for most of the
intel_plane_disable_noatomic() calls since those are done before
wm readout, and thus everything wm/ddb related in the state
will still be zeroed anyway. The only difference will be for
skl_dbuf_sanitize() is happens after wm readout. But I'll be
reordering thigns so that wm readout happens earlier and at that
point this will guarantee that we still clear out the old
wm/ddb junk from the state.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-8-ville.syrjala@linux.intel.com
Update the ddb tracking information when we disable a pipe
during sanitization. Avoids leaving stale junk in the states.
Currently this doesn't do anything as we haven't read out this
state yet when we do the sanitization, but that will change soon.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-7-ville.syrjala@linux.intel.com
Hoist the dbuf stuff into a separate function from
intel_crtc_disable_noatomic_complete() so that the details
are better hidden inside skl_watermark.c.
We can also skip the whole thing on pre-skl since the dbuf state
isn't actually used on those platforms. The readout path does
still fill dbuf_state->active_pipes but we'll remedy that later.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-6-ville.syrjala@linux.intel.com
Inactive crtcs are supposed to have their crtc_state completely
cleared. Currently we are clobbering crtc_state->cpu_transcoder
before determining whether it's actually enabled or not. Don't
do that.
I want to rework the inherited flag handling for inactive crtcs
a bit, and having a bogus cpu_transcoder in the crtc state can
then cause confusing fastset mismatches even when the crtc never
changes state during the commit.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306163420.3961-3-ville.syrjala@linux.intel.com
The compat i915_drv.h contains things that aren't there in the original
i915_drv.h. Split out gem/i915_gem_object.h and i915_scheduler_types.h,
moving the corresponding pieces out, including FORCEWAKE_ALL to
intel_uncore.h.
Technically I915_PRIORITY_DISPLAY should be in i915_priolist_types.h,
but it's a bit overkill to split out another file just for
that. i915_scheduler_types.h shall do.
With this, the compat i915_drv.h becomes a strict subset of the
original.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d6bd95bf52aa37f48ddec3e675b7a3cc66829eef.1741192597.git.jani.nikula@intel.com
[Jani: fix i915_gem_object.h header guard while applying]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We currently call intel_set_cdclk_post_plane_update() far
too early. When pipes are active during the reprogramming
the current spot only works for the cd2x divider update
case, as that is synchronize to the pipe's vblank. Squashing
and crawling are not synchronized in any way, so doing the
programming while the pipes/planes are potentially still using
the old hardware state could lead to underruns.
Move the post plane reprgramming to a spot where we know
that the pipes/planes have switched over the new hardware
state.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218211913.27867-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
If fbdev support has been disabled, no output will be shown. Remove
the fbdev-related compile guard from the driver's debugfs code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-12-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Rework fbdev probing to support fbdev_probe in struct drm_driver
and remove the old fb_probe callback. Provide an initializer macro
that sets the callback in struct drm_driver according to the kernel
configuration. Call drm_client_setup_with_color_mode() to run the
kernel's default client setup for DRM.
This commit also prepares support for the kernel's drm_log client
(or any future client) in i915. Using drm_log will also require vmap
support in GEM objects.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-11-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Move fbdev code around in the source file before switching to DRM's
generic fbdev client. This will make the conversion less intrusive.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-10-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Store instances of drm_fb_helper and struct intel_fbdev separately.
This will allow i915 to use the common fbdev client, which allocates
its own instance of struct drm_fb_helper.
There is at most one instance of type each per DRM device, so both can
be referenced directly from the i915 and DRM device structures. A later
patchset might rework the common fbdev client to allow for storing
both, drm_fb_helper and intel_fbdev, together in the same place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-9-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The value preferred_bpp in struct intel_fbdev duplicates preferred_bpp
in struct drm_fb_helper. Remove the former.
Instead let intel_fbdev_init_bios() read the framebuffer from the
hardware. Then derive preferred_bpp from its format and initialize
struct drm_fb_helper with the value. The default is 32 (i.e., XRGB8888).
Also removes one of those deprecated references to the cpp field of
struct drm_format_info.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-8-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
If the fbdev buffer is backed by stolen memory, it has to be cleared
upon resume from hibernation. Move the code into the new callback
fb_set_suspend, so that it can run from DRM's generic fbdev client.
No functional change. Other drivers are not affected.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-7-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
i915's fbdev contains code for restoring the client's framebuffer. It
is specific to i195 and cannot be ported to the common fbdev client.
Introduce the callback struct drm_fb_helper.fb_restore and implement
it for i915. The fbdev helpers invoke the callback after restoring the
fbdev client.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-6-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The DRM client code already tracks suspend status and hotplug events
for each client. Remove similar code from i915's fbdev client.
Allows for the removal of all hdp_* fields form struct intel_fbdev.
Calls to intel_fbdev_output_poll_changed() are reduced the shared
helper drm_fb_helper_hotplug_event().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-5-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Implement drm_client_dev_suspend() and drm_client_dev_resume() for
i915's fbdev emulation and call the helper via DRM client interfaces.
This is required to convert i915 and xe to DRM's generic fbdev client.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-2-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Since commit d59cf7bb73 ("drm/i915/display: Use dma_fence interfaces
instead of i915_sw_fence") we don't have anyone waiting on the
I915_RESET_MODESET bit, and there's no need for its semantics. Instead,
simply return true from intel_display_reset_prepare() to indicate that
intel_display_reset_finish() should be called.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/294690db3fae8fec7f356edf467e79882ed494db.1741001054.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a helper for checking if we want to test display reset regardless of
whether it's strictly necessary. This will come in handy in follow-up
work where we want to check this from gt reset side.
v2: Drop superfluous newline
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/487dec72f753302cd565c3a8164afa7fc1e12ed7.1741001054.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During enabling FBC, for the very first frame, the prepare dirty
rect routine wouldnt have executed as at that time the plane
reference in the fbc_state would be NULL. So this could make
driver program some invalid entries as the damage area. Though
fbc hw ignores the dirty rect values programmed for the first
frame after enabling FBC, driver must ensure that valid dirty
rect coords are programmed. So ensure that for the first frame
correct dirty rect coords are updated to the HW.
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-10-vinod.govindapillai@intel.com
It is not recommended to have both FBC dirty rect and PSR2
selective fetch be enabled at the same time. Mark FBC as not
possible, if PSR2 selective fetch is enabled.
v2: fix the condition to disable FBC if PSR2 enabled (Jani)
v3: use HAS_FBC_DIRTY_RECT()
v4: Update to patch description
Bspec: 68881
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-9-vinod.govindapillai@intel.com
Dirty rectangle feature allows FBC to recompress a subsection
of a frame. When this feature is enabled, display will read
the scan lines between dirty rectangle start line and dirty
rectangle end line in subsequent frames.
Use the merged damage clip stored in the plane state to
configure the FBC dirty rect areas.
v2: - Move dirty rect handling to fbc state (Ville)
v3: - Use intel_fbc_dirty_rect_update_noarm (Ville)
- Split plane damage collection and dirty rect preparation
- Handle case where dirty rect fall outside the visible region
v4: - A state variable to check if we need to update dirty rect
registers in case intel_fbc_can_flip_nuke() (Ville)
v5: - No need to use a separate valid flag, updates to the
conditions for prepare damage rect (Ville)
- Usage of locks in fbc dirty rect related functions (Ville)
v6: - updates dirty rect handling (Ville)
v7: - Loop through all planes in atomic state is good enough (Ville)
Bspec: 68881, 71675, 73424
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-8-vinod.govindapillai@intel.com
If FBC is already active, we don't need to call FBC activate
routine again unless there are changes to the fences. So skip
this on all platforms that don't have fences. Any FBC register
updates done after enabling the dirty rect support in xe3 will
trigger nuke by FBC which is counter productive to the fbc
dirty rect feature.
The front buffer rendering sequence will call intel_fbc_flush()
and which will call intel_fbc_nuke() or intel_fbc_activate()
based on FBC status explicitly and won't get impacted by this
change.
v2: use HAS_FBC_DIRTY_RECT()
move this functionality within intel_fbc_activate()
v3: update to intel_fbc_activate logic (Ville)
update to the patch description
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-7-vinod.govindapillai@intel.com
Introduce a macro to check if the platform supports FBC dirty
rect capability.
v2: - update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-6-vinod.govindapillai@intel.com
Userspace can pass damage area clips per plane to track
changes in a plane and some display components can utilze
these damage clips for efficiently handling use cases like
FBC, PSR etc. A merged damage area is generated and its
coordinates are updated relative to viewport and HW and
stored in the plane_state. This merged damage areas will be
used for FBC dirty rect support in xe3 in the follow-up
patch.
Big thanks to Ville Syrjala for his contribuitions in shaping
up of this series.
v1: - Move damage_merged helper to cover bigjoiner case and use
the correct plane state for damage find helper (Ville)
- Damage handling code under HAS_FBC_DIRTY_RECT() so the
the related part will be executed only for xe3+
- Changed dev_priv to i915 in one of the functions
v2: - damage reported is stored in the plane state after coords
adjustmentments irrespective of fbc dirty rect support.
- Damage to be empty in case of plane not visible (Ville)
- Handle fb could be NULL and plane not visible cases (Ville)
v3: - No need to empty damage in case disp ver < 12 (Ville)
- update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-4-vinod.govindapillai@intel.com
In the interest of limiting the display dependencies on i915 core
headers, split out i915_gtt_view_types.h from i915_vma_types.h, and only
include the new header from intel_display_types.h.
Reuse the new header from xe compat code too, failing build if partial
view is used in display code.
Side note: Why would we ever have set enum i915_gtt_view_type values to
size of each type?! What an insane hack.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb31885c32dbddad76d634c6fdb98a73b546b42e.1740412806.git.jani.nikula@intel.com
With the primary goal of removing #include "i915_vma.h" from
intel_display_types.h, move intel_plane_ggtt_offset() to a proper
function in intel_atomic_plane.c. This reveals tons of implicit
dependencies all over the place that we pulled in via i915_vma.h. Fix
the fallout.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70ac6d19518f355abf37ac8c4b0f1d18878be28c.1740412806.git.jani.nikula@intel.com
It's undesirable to have to figure out the pxp pointer in display
code. For one thing, its type is different for i915 and xe.
Since we can figure the pxp pointer out in the pxp code from the gem
object, offload it there.
v2: Rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228114527.3091620-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move hdcp_mutex, num_hdcp_streams, hdcp_auth_status, hdcp_port_data, and
hdcp_mst_type1_capable members of struct intel_digital_port under an
hdcp sub-struct to group hdcp related things together.
Rename them mutex, num_streams, auth_status, port_data, and
mst_type1_capable for clarity.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9da4be57b068acd06dec8b93977f0a70627103d4.1740746939.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move active_mst_links, mst_encoders[], and mst_mgr members of struct
intel_dp under an mst sub-struct to group mst related things together.
Rename them active_links, stream_encoders[] and mgr for clarity.
Note that is_mst and mst_detect are not included, as they're also
relevant for non-mst. The sub-struct is for active mst.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6f282f90bfe2dd9162e2dee8f681c84313971992.1740746939.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the hope of contributing to type safety in our code, let's ensure
that the type returned by the POWER_DOMAIN_*() macros is always of type
enum intel_display_power_domain.
v2:
- Remove accidental +1 in definition of POWER_DOMAIN_PIPE(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-improve-type-safey-power-domain-macros-v3-2-b6eaa00f9c33@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Although we have comments in intel_display_limits.h saying that the
code expects PIPE_A and TRANSCODER_A to be zero, it doesn't hurt to add
them as explicit base values for calculating the power domain offset in
POWER_DOMAIN_*() macros.
On the plus side, we have that this:
* Fixes a warning reported by kernel test robot <lkp@intel.com>
about doing arithmetic with two different enum types.
* Makes the code arguably more robust (in the unlikely event of those
bases becoming non-zero).
v2:
- Prefer using explicit base values instead of simply casting the
macro argument to int. (Ville)
- Update commit message to match the new approach (for reference, the
old message subject was "drm/i915/display: Use explicit cast in
POWER_DOMAIN_*() macros").
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502120809.XfmcqkBD-lkp@intel.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-improve-type-safey-power-domain-macros-v3-1-b6eaa00f9c33@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Wa_14020863754 applies to the display IP, so we should be checking on
display IP version instead of platform. So, let's replace
display->platform.battlemage with the proper IP version check (14.01 for
Xe2_HPD).
Furthermore, for workarounds, we should be checking on full IP versions
to avoid applying the workaround to some variant of the IP that could
theoretically appear in the future (which is likely to have a different
minor release number), since the issue addressed by the workaround could
be fixed in such new release.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-xe3lpd-wa-14020863754-v2-1-92b35de1c563@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Have DSB perform plane scaler programming as well. Changes
to pfit/pipe scaler are not being done on the dsb since those
take the fastset path. However we do now allow DSB based plane
updates when the pfit/pipe scaler is currently enabled (the
pfit/pipe scaler just won't be touched by the DSB).
Fortunately the hardware issue where some scaler registers
are latched at frame start and some at start of vblank has
been fixed on icl+ (IIRC), and since DSB is tgl+ only we
don't have to do any changes to the DSB vblank evasion.
Not that we handle that hardware issue correctly in the
CPU vblank evasion either...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218205850.1422-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shakar@intel.com>
We don't actually need any planes to get updated in order
to perform the commit on the DSB. Allow DSB based updates
even when we don't touch planes. The main benefit here
is that pure LUT updates will now go through the DSB path
and therefore we don't have to do vblank evasion/etc. on
the CPU.
I think the reason I had this excluded was that I was
originally contemplating using frame/flip timestamps as
a way to complete the commits. But I had to scrap that
idea when it turned out that those timestamp get
corrupted when DSB is poking at random registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218205850.1422-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
