Now that the clock is handled dynamically through
analogix_dp_resume/suspend and it isn't statically enabled in the
driver probe routine, there is no need for the remove function anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-5-l.stach@pengutronix.de
This isn't used, but gives the impression of the power on and power off
platform calls being non-symmetrical. Remove the unused callback and
rename the power_on_start to simply power_on.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-1-l.stach@pengutronix.de
The duplicated EDID is never freed. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b04036 ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0x98/0xe0
deferred_probe_work_func from process_one_work+0x240/0x6d0
process_one_work from worker_thread+0x1a0/0x3f4
worker_thread from kthread+0x104/0x138
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0895fb0 to 0xf0895ff8)
...
irq event stamp: 82357
hardirqs last enabled at (82363): [<c01a96e8>] vprintk_emit+0x308/0x33c
hardirqs last disabled at (82368): [<c01a969c>] vprintk_emit+0x2bc/0x33c
softirqs last enabled at (81614): [<c0101644>] __do_softirq+0x320/0x500
softirqs last disabled at (81609): [<c012dfe0>] __irq_exit_rcu+0x130/0x184
---[ end trace 0000000000000000 ]---
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
Cc: stable@vger.kernel.org
Fixes: 13d5b04036 ("drm/exynos: do not return negative values from .get_modes()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This reverts commit e075e496f5, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 0323287de8, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Utilize the __free() cleanup handler within the hdmi_get_phy_io function
to automatically release the device node when it is out of scope.
This eliminates the manual invocation of of_node_put(), reducing the
potential for memory leaks.
The modification requires initializing the device node at the beginning
of the function, ensuring that the automatic cleanup is safely executed.
Consequently, this removes the need for error cleanup paths that utilize
goto statements and the jump to out is no longer necessary.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Shivani Gupta <shivani07g@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Both the exynos and rockchip drivers ran into link failures after
a Kconfig cleanup:
aarch64-linux-ld: drivers/gpu/drm/exynos/exynos_dp.o: in function `exynos_dp_resume':
exynos_dp.c:(.text+0xc0): undefined reference to `analogix_dp_resume'
aarch64-linux-ld: drivers/gpu/drm/exynos/exynos_dp.o: in function `exynos_dp_suspend':
exynos_dp.c:(.text+0xf4): undefined reference to `analogix_dp_suspend'
x86_64-linux-ld: drivers/gpu/drm/rockchip/cdn-dp-core.o: in function `cdn_dp_connector_mode_valid':
cdn-dp-core.c:(.text+0x13a): undefined reference to `drm_dp_bw_code_to_link_rate'
x86_64-linux-ld: cdn-dp-core.c:(.text+0x148): undefined reference to `drm_dp_bw_code_to_link_rate'
x86_64-linux-ld: drivers/gpu/drm/rockchip/cdn-dp-core.o: in function `cdn_dp_check_link_status':
cdn-dp-core.c:(.text+0x1396): undefined reference to `drm_dp_channel_eq_ok'
In both cases, the problem is that ROCKCHIP_CDN_DP and DRM_EXYNOS_DP
are 'bool' symbols that depend on the the 'tristate' DRM_DISPLAY_HELPER
symbol, but end up not working when the SoC specific part is built-in
but the helper is in a loadable module.
Use the same trick that DRM_ROCKCHIP already uses for the EXTCON
dependency and disallow DP support when it would not work.
Fixes: 0323287de8 ("drm: Switch DRM_DISPLAY_DP_HELPER to depends on")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404124101.2988099-1-arnd@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
- Minor fix in `drm/exynos: gsc: gsc_runtime_resume`
. The patch ensures `clk_disable_unprepare()` is called on the first
element of `ctx->clocks` array.
This issue was identified by the Linux Verification Center.
- Fix excessive stack usage in `fimd_win_set_pixfmt()` in `drm/exynos`
. The issue, highlighted by gcc, involved an unnecessary on-stack copy of
the large `exynos_drm_plane` structure, now replaced with a pointer.
- Fix an incorrect type issue in `exynos_drm_fimd.c` module
. Addresses an incorrect type issue in `fimd_commit()` within the
`exynos_drm_fimd.c` The problem was reported by the kernel test robot[1].
[1] https://lore.kernel.org/oe-kbuild-all/202312140930.Me9yWf8F-lkp@intel.com/
- Fix a typo in the dt-bindings for `samsung,exynos-mixer`
. Changes 'regs' to the correct property name 'reg' in the dt-bindings
documentation for `samsung,exynos-mixer`
-----BEGIN PGP SIGNATURE-----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=OkrW
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Several fixups
- Minor fix in `drm/exynos: gsc: gsc_runtime_resume`
. The patch ensures `clk_disable_unprepare()` is called on the first
element of `ctx->clocks` array.
This issue was identified by the Linux Verification Center.
- Fix excessive stack usage in `fimd_win_set_pixfmt()` in `drm/exynos`
. The issue, highlighted by gcc, involved an unnecessary on-stack copy of
the large `exynos_drm_plane` structure, now replaced with a pointer.
- Fix an incorrect type issue in `exynos_drm_fimd.c` module
. Addresses an incorrect type issue in `fimd_commit()` within the
`exynos_drm_fimd.c` The problem was reported by the kernel test robot[1].
[1] https://lore.kernel.org/oe-kbuild-all/202312140930.Me9yWf8F-lkp@intel.com/
- Fix a typo in the dt-bindings for `samsung,exynos-mixer`
. Changes 'regs' to the correct property name 'reg' in the dt-bindings
documentation for `samsung,exynos-mixer`
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122072407.39546-1-inki.dae@samsung.com
Do not forget to call clk_disable_unprepare() on the first element of
ctx->clocks array.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 8b7d3ec83a ("drm/exynos: gsc: Convert driver to IPP v2 core API")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
gcc rightfully complains about excessive stack usage in the fimd_win_set_pixfmt()
function:
drivers/gpu/drm/exynos/exynos_drm_fimd.c: In function 'fimd_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos_drm_fimd.c:750:1: error: the frame size of 1032 bytes is larger than 1024 byte
drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos5433_drm_decon.c:381:1: error: the frame size of 1032 bytes is larger than 1024 bytes
There is really no reason to copy the large exynos_drm_plane
structure to the stack before using one of its members, so just
use a pointer instead.
Fixes: 6f8ee5c217 ("drm/exynos: fimd: Make plane alpha configurable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist
yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as
the connector type.
However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the
connector type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
fix merge conflict and drop duplicated patch description.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
-----BEGIN PGP SIGNATURE-----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=Abe4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jFrM
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
This issue[1] was reported by Dan.
Changelog v1:
- fix build warning.
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Reported-by : Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data in a single step. With this, adjust the
includes to explicitly include the correct headers. That also serves as
preparation to remove implicit includes within the DT headers
(of_device.h in particular).
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20231020125214.2930329-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
samsung_dsim_remove() returned 0 unconditionally. Make it return void
instead to convert the two related platform drivers to use
.remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20230919103939.1367659-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919103939.1367659-1-u.kleine-koenig@pengutronix.de
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The variable crtc->state->event is often protected by the lock
crtc->dev->event_lock when is accessed. However, it is accessed as a
condition of an if statement in exynos_drm_crtc_atomic_disable() without
holding the lock:
if (crtc->state->event && !crtc->state->active)
However, if crtc->state->event is changed to NULL by another thread right
after the conditions of the if statement is checked to be true, a
null-pointer dereference can occur in drm_crtc_send_vblank_event():
e->pipe = pipe;
To fix this possible null-pointer dereference caused by data race, the
spin lock coverage is extended to protect the if statement as well as the
function call to drm_crtc_send_vblank_event().
Reported-by: BassCheck <bass@buaa.edu.cn>
Link: https://sites.google.com/view/basscheck/home
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Added relevant link.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-4-tzimmermann@suse.de
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is
in DMA-able memory and should be accessed with the CPU's regular
memory ops.
v2:
* drop FBINFO_FLAG_DEFAULT
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by : Inki Dae <inki.dae@samsung.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-8-tzimmermann@suse.de
Use fbdev's DMA helpers for fbdev emulation. The driver previously
used the I/O-memory helpers, while allocating DMA-able system memory.
This could (in theory) result in bus errors from accessing the memory
range.
This bug has been present since the exynos driver was first added.
v2:
* drop the pointless Fixes tag (Javier)
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-7-tzimmermann@suse.de
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.
The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.
If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.
Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.
The bug was originally added in commit 6e3f17ee73 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.
Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd5 ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe8 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45e ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de
Backmerging into drm-misc-next to get commit 2c1c7ba457
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702 ("drm: Remove struct drm_driver.gem_prime_mmap").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
All drivers initialize this field with drm_gem_prime_mmap(). Call
the function directly and remove the field. Simplifies the code and
resolves a long-standing TODO item.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSPcdMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWrQH/3KmuvZsWMC4PpJY
VcF9VfF9i+Zv7DoG8sjD5VpNh47e87RsR6WNOFnKol5SUrM6vsBAb5i2rfQahNIv
NSj0fPCE4/Nj9LMecKVC9WD8CitxYdbR+CF9Is21AQj1VihUl9eHXGcAWxuaMyhk
TjPUwmbOOsRVMXXdGJzjX78cvLsxqpSv8A/5OTh16IBimbh7p+YjKJFkbfj/PMWf
aF1quFkIEXgzJcHCpP6KDZHr2KbpY+jIN9hUENnGKJxHYNso5u+KrIW1kAm8meP1
x26ETSquM0T70OAzovOWg+BeVkLDac/3Rh30ztLAI4AtajrlSzycvFsU9UNEJCc2
BnM2IZI=
=ANT5
-----END PGP SIGNATURE-----
Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Exynos does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v3:
* don't reorder Makefile rules (Sam)
v2:
* use FB_IO_HELPERS option
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-5-tzimmermann@suse.de
The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
Mark them as 'static inline' to avoid the warning and to make
them behave as intended.
Fixes: eb4d9796fa ("drm/exynos: g2d: Convert to driver component API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to exynos_fbdev_setup() after exynos has registered its
DRM device. As in most drivers, exynos' fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within exynos. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The DRM device stores a pointer to the fbdev helper. Remove struct
exynos_drm_private.fb_helper, which contains the same value. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Remove struct exynos_drm_fbdev, which is an empty wrapper around
struct drm_fb_helper. Use the latter directly. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fbdev's framebuffer stores a pointer to the GEM object. Remove
struct exynos_drm_fbdev.exynos_gem, which contains the same value.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Samsung MIPI DSIM controller is common DSI IP that can be used in various
SoCs like Exynos, i.MX8M Mini/Nano.
In order to access this DSI controller between various platform SoCs,
the ideal way to incorporate this in the drm stack is via the drm bridge
driver.
We already have a consolidated code for supporting component and bridge
based DRM drivers, so keep the exynos component based code in existing
exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
IRQ handler for te-gpio seems to be common across DSIM host.
However, Exynos is handling this via CRTC drivers but there is no clear
evidence on how the same has been handled in i.MX8MM. Keeping the handler
as-it-is can be a viable option but adding DSIM bridge core in upcoming
patches is not possible to call Exynos CRTC handler as DSIM bridge has
to be common across DRM bridge core instead of platform specific DRM
drivers like Exynos here.
So, this patch handles the handler via platform host helper, so-that
handling platform specific hook across Exynos and generic can be
reasonable till it makes it generic across all platforms.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSI host registration, attach and detach operations are quite
different for the component and bridge-based DRM drivers.
Supporting generic bridge driver to use both component and bridge
based DRM drivers can be tricky and would require additional host
related operation hooks.
Add host operation hooks for registering and unregistering Exynos
and generic drivers, where Exynos hooks are used in existing Exynos
component based DRM drivers and generic hooks are used in i.MX8M
bridge based DRM drivers.
Add host attach and detach operation hooks for Exynos component
DRM drivers and those get invoked while DSI core host attach and
detach gets called.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Finding the right input bus format throughout the pipeline is hard
so add atomic_get_input_bus_fmts callback and initialize with the
proper input format from list of supported output formats.
This format can be used in pipeline for negotiating bus format between
the DSI-end of this bridge and the other component closer to pipeline
components.
List of Pixel formats are taken from,
AN13573 i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
3.7.4 Pixel formats
Table 14. DSI pixel packing formats
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
active low (DE_LOW). This makes the valid data transfer on each
horizontal line.
So, add additional bus flags DE_LOW setting via input_bus_flags
for i.MX8M Mini/Nano platforms.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Look like an explicit fixing up of mode_flags is required for DSIM IP
present in i.MX8M Mini/Nano SoCs.
At least the LCDIF + DSIM needs active low sync polarities in order
to correlate the correct sync flags of the surrounding components in
the chain to make sure the whole pipeline can work properly.
On the other hand the i.MX 8M Mini Applications Processor Reference Manual,
Rev. 3, 11/2020 says.
"13.6.3.5.2 RGB interface
Vsync, Hsync, and VDEN are active high signals."
i.MX 8M Mini Applications Processor Reference Manual Rev. 3, 11/2020
3.6.3.5.2 RGB interface
i.MX 8M Nano Applications Processor Reference Manual Rev. 2, 07/2022
13.6.2.7.2 RGB interface
both claim "Vsync, Hsync, and VDEN are active high signals.", the
LCDIF must generate inverted HS/VS/DE signals, i.e. active LOW.
No clear evidence about whether it can be documentation issues or
something, so added proper comments on the code.
Comments are suggested by Marek Vasut.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Host transfer() in the DSI master will invoke only when the DSI commands
are sent from DSI devices like DSI Panel or DSI bridges and this host
the transfer wouldn't invoke for I2C-based-DSI bridge drivers.
Handling DSI host initialization in transfer calls misses the controller
setup for I2C configured DSI bridges.
This patch updates the DSI host initialization by calling host to init
from bridge pre_enable as the bridge pre_enable API is invoked by core
as it is common across all classes of DSI device drivers.
The host init during pre_enable is conditional and not invoked for Exynos
as existing downstream drm panels and bridges in Exynos are expecting
the host initialization during DSI transfer.
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Samsung MIPI DSIM controller is common DSI IP that can be used
in various SoCs like Exynos, i.MX8M Mini/Nano/Plus.
Add hw_type enum via platform_data so that accessing the different
controller data between various platforms becomes easy and meaningful.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Look like PLL PMS_P offset value varies between platforms that have
Samsung DSIM IP.
However, there is no clear evidence for it as both Exynos and i.MX
8M Mini Application Processor Reference Manual is still referring
the PMS_P offset as 13.
The offset 13 is not working for i.MX8M Mini SoCs but the downstream
NXP sec-dsim.c driver is using offset 14 for i.MX8M Mini SoC platforms
[1] [2].
PMS_P value set in sec_mipi_dsim_check_pll_out using PLLCTRL_SET_P()
with offset 13 and then an additional offset of one bit added in
sec_mipi_dsim_config_pll via PLLCTRL_SET_PMS().
Not sure whether it is reference manual documentation or something
else but this patch trusts the downstream code and handle PLL_P offset
via platform driver data so-that imx8mm driver data shall use
pll_p_offset to 14.
Similar to Mini the i.MX8M Nano/Plus also has P=14, unlike Exynos.
[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n210
[2] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n211
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The same Samsung MIPI DSIM master can also be used in NXP's
i.MX8M Mini/Nano/Plus SoC.
In i.MX8M Mini/Nano/Plus SoC the DSI Phy requires a MIPI DPHY
bit to reset in order to activate the PHY and that can be done
via upstream i.MX8M blk-ctrl driver.
So, mark the phy get as optional.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In general, for MIPI DSI there are three ways to represent the
pipeline for an upstream bridge to find the connected downstream
panel or bridge.
1. Child panel or bridge as a conventional device tree child node.
2. Child panel or bridge as an OF-graph port node.
3. Child panel or bridge as an OF-graph ports node.
There are three different downstream panels or bridges that are
possible to connect an upstream DSI host bridge - DSI Panel,
DSI Bridge, and I2C-Configured DSI bridge.
An example of the downstream panel represented as a child node,
&dsi {
compatible = "samsung,exynos5433-mipi-dsi";
ports {
port@0 {
reg = <0>;
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
};
};
panel@0 {
reg = <0>;
};
};
An example of the downstream bridge represented as a port node,
&i2c4 {
bridge@2c {
compatible = "ti,sn65dsi84";
ports {
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
data-lanes = <1 2>;
};
};
port@2 {
reg = <2>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
port {
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
dsi_out_bridge: endpoint@1 {
reg = <1>;
remote-endpoint = <&bridge_in_dsi>;
};
};
};
An example of the downstream bridge represented as a ports node,
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
ports {
port@0 {
reg = <0>;
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out_bridge: endpoint {
remote-endpoint = <&bridge_in_dsi>;
};
};
};
In, summary it is possible to represent all three downstream slaves
devices using OF-graph port or ports node however only DSI Panel and
DSI Bridge are possible but not possible to represent I2C-Configured
DSI bridge child nodes since I2C-Configure bridges are child of I2C
node, not upstream DSI host bridge and it is must represent them
endpoint port linking.
This indeed means, the OF-graph port or ports representation is
mandatory for I2C-Configured DSI bridges.
This patch tries to add an OF-graph port or ports representation
detection code on top of existing child node detection.
It is possible to replace the entire detection code using existing
drm_of helper drm_of_find_panel_or_bridge but it will break the
Exynos DSI since the pipeline doesn't support OF-graph port or ports
node.
Overall, this patch has a combination of child and OF-graph pipeline
detections in order to support the backward compatibility of Exynos
DSI child node and i.MX8M Mini/Nano/Plus OF-graph port or ports
node pipelines.
This is the first common DSI host bridge driver that needs to support
all possible downstream connection pipeline combinations.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos DSI already converted into a bridge driver, so bridge
detach will suppose happened during bridge chain removal done
by the bridge core.
Drop the explicit call chain to detach the bridge.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Some of these dependencies used to be sensible when only a small part of
the platforms supported by ARCH=arm could be compiled together in a
single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard
for kernel options incompatible with a multiplatform image. See commit
84fc863606 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more
details.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209220555.3631364-1-u.kleine-koenig@pengutronix.de
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.
As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().
Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.
Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.
Fixes: 643231b283 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Make sure to restore bridge chain order by enabling the drm panel
prepare_prev_first flag of the bridge and panel drivers - tc358764 display
bridge device and Samsung s6e3ha2/s6e63j0x03/s6e8aa0 panel devices.
In case of any boards using Exynos5433 SoC, below Display pipeline could be
configured.
Decon -> MIC -> MIPI-DSI -> Panel
So, this patch series makes sure to enable previous bridge device before
enabling MIPI-DSI device.
-----BEGIN PGP SIGNATURE-----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=L8+N
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
One fixup series
- Make sure to restore bridge chain order by enabling the drm panel
prepare_prev_first flag of the bridge and panel drivers - tc358764 display
bridge device and Samsung s6e3ha2/s6e63j0x03/s6e8aa0 panel devices.
In case of any boards using Exynos5433 SoC, below Display pipeline could be
configured.
Decon -> MIC -> MIPI-DSI -> Panel
So, this patch series makes sure to enable previous bridge device before
enabling MIPI-DSI device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130051055.15340-1-inki.dae@samsung.com
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
Restore the proper bridge chain by finding the previous bridge
in the chain instead of passing NULL.
This establishes a proper bridge chain while attaching downstream
bridges.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
HSA/HBP/HFP/HSE mode bits in Processor Reference Manuals specify
a naming conversion as 'disable mode bit' due to its bit definition,
0 = Enable and 1 = Disable.
For HSE bit, the i.MX 8M Mini/Nano/Plus Applications Processor
Reference Manual named this bit as 'HseDisableMode' but the bit
definition is quite opposite like
0 = Disables transfer
1 = Enables transfer
which clearly states that HSE is not a disable bit.
HSE is named as per the manual even though it is not a disable
bit however the driver logic for handling HSE is based on the
MIPI_DSI_MODE_VIDEO_HSE flag itself.
Cc: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-2-jagan@amarulasolutions.com
HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.
The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.
This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.
Fixes: 0f3b68b66a ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com
UAPI Changes:
* connector: Support analog-TV mode property
* media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI
Cross-subsystem Changes:
* dma-buf: Documentation fixes
* i2c: Introduce i2c_client_get_device_id() helper
Core Changes:
* Improve support for analog TV output
* bridge: Remove unused drm_bridge_chain functions
* debugfs: Add per-device helpers and convert various DRM drivers
* dp-mst: Various fixes
* fbdev emulation: Always pick 32 bpp as default
* KUnit: Add tests for managed helpers; Various cleanups
* panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
* TTM: Open-code ttm_bo_wait() and remove the helper
Driver Changes:
* Fix preferred depth and bpp values throughout DRM drivers
* Remove #CONFIG_PM guards throughout DRM drivers
* ast: Various fixes
* bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
Use atomic bridge functions
* gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
during atomic update
* ili9486: Support 16-bit pixel data
* imx: Split off IPUv3 driver; Various fixes
* mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
Support separate I/O-voltage supply
* mxsfb: Depend on ARCH_MXS or ARCH_MXC
* omapdrm: Various fixes
* panel: Use ktime_get_boottime() to measure power-down delay in various
drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
Add support
* sprd: Cleanups
* sun4i: Convert to new TV-mode property
* tidss: Various fixes
* v3d: Various fixes
* vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
bridge
* virtio: Improve tracing
* vkms: Support small cursors in IGT tests; Various fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmO0B0QACgkQaA3BHVML
eiMKtAf9EXt5yaEonR4gsGNVD70VkebW+jPEWbEMg5hMFDHE9sjBja8T7bOxeeL1
BVofJiAuEZW9176eqeWvShuwOuiE7lf4WQLMvXfFmtHF/Nac9HUtEvOcvc1vEDUB
y6VFlVHe8mSp+Iy0WPLyZCtT4d7v2eM+VYm0HgFa74dSTzQTLGPiUI/XVb/YDaA7
FHKB5NvsMX9S1XvjxCsq0jA5bo8SSzh5CVKerdAZkBJMCSmKiY09o2p5C7vw3EAz
WUXL5CXqd9bwgvZa/9ZClQtpJaikNGoOaMSEl67rbWdVTk0LIpqx3nTY15py5LXd
SG4Wtfor3Vf1REa9TrR2uCIOmh+1gQ==
=0/PC
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-01-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* connector: Support analog-TV mode property
* media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI
Cross-subsystem Changes:
* dma-buf: Documentation fixes
* i2c: Introduce i2c_client_get_device_id() helper
Core Changes:
* Improve support for analog TV output
* bridge: Remove unused drm_bridge_chain functions
* debugfs: Add per-device helpers and convert various DRM drivers
* dp-mst: Various fixes
* fbdev emulation: Always pick 32 bpp as default
* KUnit: Add tests for managed helpers; Various cleanups
* panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
* TTM: Open-code ttm_bo_wait() and remove the helper
Driver Changes:
* Fix preferred depth and bpp values throughout DRM drivers
* Remove #CONFIG_PM guards throughout DRM drivers
* ast: Various fixes
* bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
Use atomic bridge functions
* gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
during atomic update
* ili9486: Support 16-bit pixel data
* imx: Split off IPUv3 driver; Various fixes
* mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
Support separate I/O-voltage supply
* mxsfb: Depend on ARCH_MXS or ARCH_MXC
* omapdrm: Various fixes
* panel: Use ktime_get_boottime() to measure power-down delay in various
drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
Add support
* sprd: Cleanups
* sun4i: Convert to new TV-mode property
* tidss: Various fixes
* v3d: Various fixes
* vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
bridge
* virtio: Improve tracing
* vkms: Support small cursors in IGT tests; Various fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
- More userfaultfs work from Peter Xu.
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
- Some filemap cleanups from Vishal Moola.
- David Hildenbrand added the ability to selftest anon memory COW handling.
- Some cpuset simplifications from Liu Shixin.
- Addition of vmalloc tracing support by Uladzislau Rezki.
- Some pagecache folioifications and simplifications from Matthew Wilcox.
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword. This series shold have been in the
non-MM tree, my bad.
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages.
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages.
- Peter Xu utilized the PTE marker code for handling swapin errors.
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient.
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand.
- zram support for multiple compression streams from Sergey Senozhatsky.
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway.
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations.
- Vishal Moola removed the try_to_release_page() wrapper.
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache.
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking.
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend.
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range().
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen.
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect.
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages().
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting.
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines.
- Many singleton patches, as usual.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
CodAgiA51qwzId3GRytIo/tfWZSezgA=
=d19R
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
Use the DEFINE_RUNTIME_DEV_PM_OPS(), SYSTEM_SLEEP_PM_OPS(),
RUNTIME_PM_OPS() and pm_ptr() macros to handle the runtime and suspend
PM callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191733.137897-10-paul@crapouillou.net
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages
using unpin_user_pages_dirty_lock(true), the assumption is that all these
pages are writable.
FOLL_FORCE in this case seems to be a legacy leftover. Let's just remove
it.
Link: https://lkml.kernel.org/r/20221116102659.70287-18-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement the fbdev's read/write helpers with the same functions. Use
the generic fbdev's code as template. Convert all drivers.
DRM's fb helpers must implement regular I/O functionality in struct
fb_ops and possibly perform a damage update. Handle all this in the
same functions and convert drivers. The functionality has been used
as part of the generic fbdev code for some time. The drivers don't
set struct drm_fb_helper.fb_dirty, so they will not be affected by
damage handling.
For I/O memory, fb helpers now provide drm_fb_helper_cfb_read() and
drm_fb_helper_cfb_write(). Several drivers require these. Until now
tegra used I/O read and write, although the memory buffer appears to
be in system memory. So use _sys_ helpers now.
v3:
* fix docs (Javier)
v2:
* rebase onto vmwgfx changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-18-tzimmermann@suse.de
Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info()
as part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de
Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as
part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de
Including:
- Removal of the bus_set_iommu() interface which became
unnecesary because of IOMMU per-device probing
- Make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- Support for AMD IOMMUv2 page-tables for the DMA-API layer. The
v2 page-tables are compatible with the x86 CPU page-tables.
Using them for DMA-API prepares support for hardware-assisted
IOMMU virtualization
- Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- Some smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=h0sT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
The field mode_valid in exynos_drm_crtc_ops is expected to be of type enum
drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode);
Likewise for mode_valid in drm_connector_helper_funcs.
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of mixer_mode_valid and hdmi_mode_valid should be changed
from int to enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://protect2.fireeye.com/v1/url?k=3e644738-5fef521d-3e65cc77-
74fe485cbff6-36ad29bf912d3c9f&q=1&e=5cc06174-77dd-4abd-ab50-
155da5711aa3&u=https%3A%2F%2Fgithub.com%2FClangBuiltLinux%2Flinux%2Fissues%2F
1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi.
This driver calls drm_detect_hdmi_monitor() to receive the same
information, which is less efficient.
Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
-----BEGIN PGP SIGNATURE-----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=kU/l
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
As diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a
bunch of new drivers (as usual), while there have been some
significant (but almost invisible) improvements in ALSA core
side, too. Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user
won't notice, but on the devices with tons of control elements,
it can be visibly faster
- Support for input validation for controls; this will harden
for badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer
in situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some
board integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)
-----BEGIN PGP SIGNATURE-----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=1n0/
-----END PGP SIGNATURE-----
Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
new drivers (as usual), while there have been some significant (but
almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't
notice, but on the devices with tons of control elements, it can be
visibly faster
- Support for input validation for controls; this will harden for
badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in
situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board
integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
ALSA: line6: Replace sprintf() with sysfs_emit()
ALSA: hda: Replace sprintf() with sysfs_emit()
ALSA: pcm: Replace sprintf() with sysfs_emit()
ALSA: core: Replace scnprintf() with sysfs_emit()
ALSA: control-led: Replace sprintf() with sysfs_emit()
ALSA: aoa: Replace sprintf() with sysfs_emit()
ALSA: ac97: Replace sprintf() with sysfs_emit()
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
ALSA: control: Use deferred fasync helper
ALSA: pcm: Use deferred fasync helper
ALSA: timer: Use deferred fasync helper
ALSA: core: Add async signal helpers
ASoC: q6asm: use kcalloc() instead of kzalloc()
ACPI: scan: Add CLSA0101 Laptop Support
ALSA: hda: cs35l41: Support CLSA0101
ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
ASoC: dt-bindings: use spi-peripheral-props.yaml
ASoC: codecs: va-macro: use fsgen as clock
...
Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
- Remove Joonyoung Shim from MAINTAINERS and relevant yaml files.
He left from Samsung so his email address isn't valid anymore.
Fixup
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
-----BEGIN PGP SIGNATURE-----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=KyiI
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- Remove Joonyoung Shim from MAINTAINERS and relevant yaml files.
He left from Samsung so his email address isn't valid anymore.
Fixup
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712061008.199961-1-inki.dae@samsung.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmLLR2MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG+hMH/jKGMOAbicR/CRq8
WLKmpb1eTJP2dbeiEs5amBk9DZQhqjx6tIQRCpZoGxBL+XWq7DX2fRLkAT56yS5/
NwferpR6IR9GlhjbfczF0JuQkP6eRUXnLrIKS5MViLI5QrCI80kkj4/mdqUXSiBV
cMfXl5T1j+pb3zHUVXjnmvY+77q6rZTPoGxa/l8d6MaIhAg+jhu2E1HaSaSCX/YK
TViq7ciI9cXoFV9yqhLkkBdGjBV8VQsKmeWEcA738bdSy1WAJSV1SVTJqLFvwdPI
PM1asxkPoQ7jRrwsY4G8pZ3zPskJMS4Qwdn64HK+no2AKhJt2p6MePD1XblcrGHK
QNStMY0=
=LfuD
-----END PGP SIGNATURE-----
Backmerge tag 'v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge in rc6 so I can merge msm next easier.
Linux 5.19-rc6
Signed-off-by: Dave Airlie <airlied@redhat.com>
In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare()
to free resource that have been used.
Fixes: 6f83d20838 ("drm/exynos: use DRM_DEV_ERROR to print out error
message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
