Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-31 22:23:05 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,382,414 Commits 7 Branches 779 Tags 4.4 GiB
loongarch-next
Commit Graph

321 Commits

Author SHA1 Message Date
Linus Torvalds
260f6f4fda drm for 6.17-rc1 
non-drm:
 rust:
 - make ETIMEDOUT available
 - add size constants up to SZ_2G
 - add DMA coherent allocation bindings
 mtd:
 - driver for Intel GPU non-volatile storage
 i2c
 - designware quirk for Intel xe
 
 core:
 - atomic helpers: tune enable/disable sequences
 - add task info to wedge API
 - refactor EDID quirks
 - connector: move HDR sink to drm_display_info
 - fourcc: half-float and 32-bit float formats
 - mode_config: pass format info to simplify
 
 dma-buf:
 - heaps: Give CMA heap a stable name
 
 ci:
 - add device tree validation and kunit
 
 displayport:
 - change AUX DPCD access probe address
 - add quirk for DPCD probe
 - add panel replay definitions
 - backlight control helpers
 
 fbdev:
 - make CONFIG_FIRMWARE_EDID available on all arches
 
 fence:
 - fix UAF issues
 
 format-helper:
 - improve tests
 
 gpusvm:
 - introduce devmem only flag for allocation
 - add timeslicing support to GPU SVM
 
 ttm:
 - improve eviction
 
 sched:
 - tracing improvements
 - kunit improvements
 - memory leak fixes
 - reset handling improvements
 
 color mgmt:
 - add hardware gamma LUT handling helpers
 
 bridge:
 - add destroy hook
 - switch to reference counted drm_bridge allocations
 - tc358767: convert to devm_drm_bridge_alloc
 - improve CEC handling
 
 panel:
 - switch to reference counter drm_panel allocations
 - fwnode panel lookup
 - Huiling hl055fhv028c support
 - Raspberry Pi 7" 720x1280 support
 - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
 - simple: AUO P238HAN01
 - st7701: Winstar wf40eswaa6mnn0
 - visionox: rm69299-shift
 - Renesas R61307, Renesas R69328 support
 - DJN HX83112B
 
 hdmi:
 - add CEC handling
 - YUV420 output support
 
 xe:
 - WildCat Lake support
 - Enable PanthorLake by default
 - mark BMG as SRIOV capable
 - update firmware recommendations
 - Expose media OA units
 - aux-bux support for non-volatile memory
 - MTD intel-dg driver for non-volatile memory
 - Expose fan control and voltage regulator in sysfs
 - restructure migration for multi-device
 - Restore GuC submit UAF fix
 - make GEM shrinker drm managed
 - SRIOV VF Post-migration recovery of GGTT nodes
 - W/A additions/reworks
 - Prefetch support for svm ranges
 - Don't allocate managed BO for each policy change
 - HWMON fixes for BMG
 - Create LRC BO without VM
 - PCI ID updates
 - make SLPC debugfs files optional
 - rework eviction rejection of bound external BOs
 - consolidate PAT programming logic for pre/post Xe2
 - init changes for flicker-free boot
 - Enable GuC Dynamic Inhibit Context switch
 
 i915:
 - drm_panic support for i915/xe
 - initial flip queue off by default for LNL/PNL
 - Wildcat Lake Display support
 - Support for DSC fractional link bpp
 - Support for simultaneous Panel Replay and Adaptive sync
 - Support for PTL+ double buffer LUT
 - initial PIPEDMC event handling
 - drm_panel_follower support
 - DPLL interface renames
 - allocate struct intel_display dynamically
 - flip queue preperation
 - abstract DRAM detection better
 - avoid GuC scheduling stalls
 - remove DG1 force probe requirement
 - fix MEI interrupt handler on RT kernels
 - use backlight control helpers for eDP
 - more shared display code refactoring
 
 amdgpu:
 - add userq slot to INFO ioctl
 - SR-IOV hibernation support
 - Suspend improvements
 - Backlight improvements
 - Use scaling for non-native eDP modes
 - cleaner shader updates for GC 9.x
 - Remove fence slab
 - SDMA fw checks for userq support
 - RAS updates
 - DMCUB updates
 - DP tunneling fixes
 - Display idle D3 support
 - Per queue reset improvements
 - initial smartmux support
 
 amdkfd:
 - enable KFD on loongarch
 - mtype fix for ext coherent system memory
 
 radeon:
 - CS validation additional GL extensions
 - drop console lock during suspend/resume
 - bump driver version
 
 msm:
 - VM BIND support
 - CI: infrastructure updates
 - UBWC single source of truth
 - decouple GPU and KMS support
 - DP: rework I/O accessors
 - DPU: SM8750 support
 - DSI: SM8750 support
 - GPU: X1-45 support and speedbin support for X1-85
 - MDSS: SM8750 support
 
 nova:
 - register! macro improvements
 - DMA object abstraction
 - VBIOS parser + fwsec lookup
 - sysmem flush page support
 - falcon: generic falcon boot code and HAL
 - FWSEC-FRTS: fb setup and load/execute
 
 ivpu:
 - Add Wildcat Lake support
 - Add turbo flag
 
 ast:
 - improve hardware generations implementation
 
 imx:
 - IMX8qxq Display Controller support
 
 lima:
 - Rockchip RK3528 GPU support
 
 nouveau:
 - fence handling cleanup
 
 panfrost:
 - MT8370 support
 - bo labeling
 - 64-bit register access
 
 qaic:
 - add RAS support
 
 rockchip:
 - convert inno_hdmi to a bridge
 
 rz-du:
 - add RZ/V2H(P) support
 - MIPI-DSI DCS support
 
 sitronix:
 - ST7567 support
 
 sun4i:
 - add H616 support
 
 tidss:
 - add TI AM62L support
 - AM65x OLDI bridge support
 
 bochs:
 - drm panic support
 
 vkms:
 - YUV and R* format support
 - use faux device
 
 vmwgfx:
 - fence improvements
 
 hyperv:
 - move out of simple
 - add drm_panic support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmiJM/0ACgkQDHTzWXnE
 hr6MpA/+JJKGdSdrE95QkaMcOZh/3e3areGXZ0V/RrrJXdB4/DoAfQSHhF0H7m7y
 MhBGVLGNMXq7KHrz28p1MjLHrE1mwmvJ6hZ4J076ed4u9naoCD0m6k5w5wiue+KL
 HyPR54ADxN0BYmgV0l/B0wj42KsHyTO4x4hdqPJu02V9Dtmx6FCh2ujkOF3p9nbK
 GMwWDttl4KEKljD0IvQ9YIYJ66crYGx/XmZi7JoWRrS104K/h1u8qZuXBp5jVKTy
 OZRAVyLdmJqdTOLH7l599MBBcEd/bNV37/LVwF4T5iFunEKOAiyN0QY0OR+IeRVh
 ZfOv2/gp4UNyIfyahQ7LKLgEilNPGHoPitvDJPvBZxW2UjwXVNvA1QfdK5DAlVRS
 D5NoFRjlFFCz8/c2hQwlKJ9o7eVgH3/pK0mwR7SPGQTuqzLFCrAfCuzUvg/gV++6
 JFqmGKMHeCoxO2o4GMrwjFttStP41usxtV/D+grcbPteNO9UyKJS4C38n4eamJXM
 a9Sy9APuAb6F0w5+yMItEF7TQifgmhIbm5AZHlxE1KoDQV6TdiIf1Gou5LeDGoL6
 OACbXHJPL52tUnfCRpbfI4tE/IVyYsfL01JnvZ5cZZWItXfcIz76ykJri+E0G60g
 yRl/zkimHKO4B0l/HSzal5xROXr+3VzeWehEiz/ot1VriP5OesA=
 =n9MO
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "Highlights:

   - Intel xe enable Panthor Lake, started adding WildCat Lake

   - amdgpu has a bunch of reset improvments along with the usual IP
     updates

   - msm got VM_BIND support which is important for vulkan sparse memory

   - more drm_panic users

   - gpusvm common code to handle a bunch of core SVM work outside
     drivers.

  Detail summary:

  Changes outside drm subdirectory:
   - 'shrink_shmem_memory()' for better shmem/hibernate interaction
   - Rust support infrastructure:
      - make ETIMEDOUT available
      - add size constants up to SZ_2G
      - add DMA coherent allocation bindings
   - mtd driver for Intel GPU non-volatile storage
   - i2c designware quirk for Intel xe

  core:
   - atomic helpers: tune enable/disable sequences
   - add task info to wedge API
   - refactor EDID quirks
   - connector: move HDR sink to drm_display_info
   - fourcc: half-float and 32-bit float formats
   - mode_config: pass format info to simplify

  dma-buf:
   - heaps: Give CMA heap a stable name

  ci:
   - add device tree validation and kunit

  displayport:
   - change AUX DPCD access probe address
   - add quirk for DPCD probe
   - add panel replay definitions
   - backlight control helpers

  fbdev:
   - make CONFIG_FIRMWARE_EDID available on all arches

  fence:
   - fix UAF issues

  format-helper:
   - improve tests

  gpusvm:
   - introduce devmem only flag for allocation
   - add timeslicing support to GPU SVM

  ttm:
   - improve eviction

  sched:
   - tracing improvements
   - kunit improvements
   - memory leak fixes
   - reset handling improvements

  color mgmt:
   - add hardware gamma LUT handling helpers

  bridge:
   - add destroy hook
   - switch to reference counted drm_bridge allocations
   - tc358767: convert to devm_drm_bridge_alloc
   - improve CEC handling

  panel:
   - switch to reference counter drm_panel allocations
   - fwnode panel lookup
   - Huiling hl055fhv028c support
   - Raspberry Pi 7" 720x1280 support
   - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
   - simple: AUO P238HAN01
   - st7701: Winstar wf40eswaa6mnn0
   - visionox: rm69299-shift
   - Renesas R61307, Renesas R69328 support
   - DJN HX83112B

  hdmi:
   - add CEC handling
   - YUV420 output support

  xe:
   - WildCat Lake support
   - Enable PanthorLake by default
   - mark BMG as SRIOV capable
   - update firmware recommendations
   - Expose media OA units
   - aux-bux support for non-volatile memory
   - MTD intel-dg driver for non-volatile memory
   - Expose fan control and voltage regulator in sysfs
   - restructure migration for multi-device
   - Restore GuC submit UAF fix
   - make GEM shrinker drm managed
   - SRIOV VF Post-migration recovery of GGTT nodes
   - W/A additions/reworks
   - Prefetch support for svm ranges
   - Don't allocate managed BO for each policy change
   - HWMON fixes for BMG
   - Create LRC BO without VM
   - PCI ID updates
   - make SLPC debugfs files optional
   - rework eviction rejection of bound external BOs
   - consolidate PAT programming logic for pre/post Xe2
   - init changes for flicker-free boot
   - Enable GuC Dynamic Inhibit Context switch

  i915:
   - drm_panic support for i915/xe
   - initial flip queue off by default for LNL/PNL
   - Wildcat Lake Display support
   - Support for DSC fractional link bpp
   - Support for simultaneous Panel Replay and Adaptive sync
   - Support for PTL+ double buffer LUT
   - initial PIPEDMC event handling
   - drm_panel_follower support
   - DPLL interface renames
   - allocate struct intel_display dynamically
   - flip queue preperation
   - abstract DRAM detection better
   - avoid GuC scheduling stalls
   - remove DG1 force probe requirement
   - fix MEI interrupt handler on RT kernels
   - use backlight control helpers for eDP
   - more shared display code refactoring

  amdgpu:
   - add userq slot to INFO ioctl
   - SR-IOV hibernation support
   - Suspend improvements
   - Backlight improvements
   - Use scaling for non-native eDP modes
   - cleaner shader updates for GC 9.x
   - Remove fence slab
   - SDMA fw checks for userq support
   - RAS updates
   - DMCUB updates
   - DP tunneling fixes
   - Display idle D3 support
   - Per queue reset improvements
   - initial smartmux support

  amdkfd:
   - enable KFD on loongarch
   - mtype fix for ext coherent system memory

  radeon:
   - CS validation additional GL extensions
   - drop console lock during suspend/resume
   - bump driver version

  msm:
   - VM BIND support
   - CI: infrastructure updates
   - UBWC single source of truth
   - decouple GPU and KMS support
   - DP: rework I/O accessors
   - DPU: SM8750 support
   - DSI: SM8750 support
   - GPU: X1-45 support and speedbin support for X1-85
   - MDSS: SM8750 support

  nova:
   - register! macro improvements
   - DMA object abstraction
   - VBIOS parser + fwsec lookup
   - sysmem flush page support
   - falcon: generic falcon boot code and HAL
   - FWSEC-FRTS: fb setup and load/execute

  ivpu:
   - Add Wildcat Lake support
   - Add turbo flag

  ast:
   - improve hardware generations implementation

  imx:
   - IMX8qxq Display Controller support

  lima:
   - Rockchip RK3528 GPU support

  nouveau:
   - fence handling cleanup

  panfrost:
   - MT8370 support
   - bo labeling
   - 64-bit register access

  qaic:
   - add RAS support

  rockchip:
   - convert inno_hdmi to a bridge

  rz-du:
   - add RZ/V2H(P) support
   - MIPI-DSI DCS support

  sitronix:
   - ST7567 support

  sun4i:
   - add H616 support

  tidss:
   - add TI AM62L support
   - AM65x OLDI bridge support

  bochs:
   - drm panic support

  vkms:
   - YUV and R* format support
   - use faux device

  vmwgfx:
   - fence improvements

  hyperv:
   - move out of simple
   - add drm_panic support"

* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
  drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
  drm/tidss: encoder: convert to devm_drm_bridge_alloc()
  drm/amdgpu: move reset support type checks into the caller
  drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
  drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
  drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
  drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
  drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
  drm/amdgpu: Add WARN_ON to the resource clear function
  drm/amd/pm: Use cached metrics data on SMUv13.0.6
  drm/amd/pm: Use cached data for min/max clocks
  gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
  drm/amdgpu: Replace HQD terminology with slots naming
  drm/amdgpu: Add user queue instance count in HW IP info
  drm/amd/amdgpu: Add helper functions for isp buffers
  drm/amd/amdgpu: Initialize swnode for ISP MFD device
  ...
 2025-07-30 19:26:49 -07:00
Linus Torvalds
8be4d31cb8 Networking changes for 6.17. 
Core & protocols
 ----------------
 
  - Wrap datapath globals into net_aligned_data, to avoid false sharing.
 
  - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
 
  - Add SO_INQ and SCM_INQ support to AF_UNIX.
 
  - Add SIOCINQ support to AF_VSOCK.
 
  - Add TCP_MAXSEG sockopt to MPTCP.
 
  - Add IPv6 force_forwarding sysctl to enable forwarding per interface.
 
  - Make TCP validation of whether packet fully fits in the receive
    window and the rcv_buf more strict. With increased use of HW
    aggregation a single "packet" can be multiple 100s of kB.
 
  - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
    improves latency up to 33% for sockmap users.
 
  - Convert TCP send queue handling from tasklet to BH workque.
 
  - Improve BPF iteration over TCP sockets to see each socket exactly once.
 
  - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
 
  - Support enabling kernel threads for NAPI processing on per-NAPI
    instance basis rather than a whole device. Fully stop the kernel NAPI
    thread when threaded NAPI gets disabled. Previously thread would stick
    around until ifdown due to tricky synchronization.
 
  - Allow multicast routing to take effect on locally-generated packets.
 
  - Add output interface argument for End.X in segment routing.
 
  - MCTP: add support for gateway routing, improve bind() handling.
 
  - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
 
  - Add a new neighbor flag ("extern_valid"), which cedes refresh
    responsibilities to userspace. This is needed for EVPN multi-homing
    where a neighbor entry for a multi-homed host needs to be synced
    across all the VTEPs among which the host is multi-homed.
 
  - Support NUD_PERMANENT for proxy neighbor entries.
 
  - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
 
  - Add sequence numbers to netconsole messages. Unregister netconsole's
    console when all net targets are removed. Code refactoring.
    Add a number of selftests.
 
  - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
    should be used for an inbound SA lookup.
 
  - Support inspecting ref_tracker state via DebugFS.
 
  - Don't force bonding advertisement frames tx to ~333 ms boundaries.
    Add broadcast_neighbor option to send ARP/ND on all bonded links.
 
  - Allow providing upcall pid for the 'execute' command in openvswitch.
 
  - Remove DCCP support from Netfilter's conntrack.
 
  - Disallow multiple packet duplications in the queuing layer.
 
  - Prevent use of deprecated iptables code on PREEMPT_RT.
 
 Driver API
 ----------
 
  - Support RSS and hashing configuration over ethtool Netlink.
 
  - Add dedicated ethtool callbacks for getting and setting hashing fields.
 
  - Add support for power budget evaluation strategy in PSE /
    Power-over-Ethernet. Generate Netlink events for overcurrent etc.
 
  - Support DPLL phase offset monitoring across all device inputs.
    Support providing clock reference and SYNC over separate DPLL
    inputs.
 
  - Support traffic classes in devlink rate API for bandwidth management.
 
  - Remove rtnl_lock dependency from UDP tunnel port configuration.
 
 Device drivers
 --------------
 
  - Add a new Broadcom driver for 800G Ethernet (bnge).
 
  - Add a standalone driver for Microchip ZL3073x DPLL.
 
  - Remove IBM's NETIUCV device driver.
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
     - support zero-copy Tx of DMABUF memory
     - take page size into account for page pool recycling rings
    - Intel (100G, ice, idpf):
      - idpf: XDP and AF_XDP support preparations
      - idpf: add flow steering
      - add link_down_events statistic
      - clean up the TSPLL code
      - preparations for live VM migration
    - nVidia/Mellanox:
     - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
     - optimize context memory usage for matchers
     - expose serial numbers in devlink info
     - support PCIe congestion metrics
    - Meta (fbnic):
      - add 25G, 50G, and 100G link modes to phylink
      - support dumping FW logs
    - Marvell/Cavium:
      - support for CN20K generation of the Octeon chips
    - Amazon:
      - add HW clock (without timestamping, just hypervisor time access)
 
  - Ethernet virtual:
    - VirtIO net:
      - support segmentation of UDP-tunnel-encapsulated packets
    - Google (gve):
      - support packet timestamping and clock synchronization
    - Microsoft vNIC:
      - add handler for device-originated servicing events
      - allow dynamic MSI-X vector allocation
      - support Tx bandwidth clamping
 
  - Ethernet NICs consumer, and embedded:
    - AMD:
      - amd-xgbe: hardware timestamping and PTP clock support
    - Broadcom integrated MACs (bcmgenet, bcmasp):
      - use napi_complete_done() return value to support NAPI polling
      - add support for re-starting auto-negotiation
    - Broadcom switches (b53):
      - support BCM5325 switches
      - add bcm63xx EPHY power control
    - Synopsys (stmmac):
      - lots of code refactoring and cleanups
    - TI:
      - icssg-prueth: read firmware-names from device tree
      - icssg: PRP offload support
    - Microchip:
      - lan78xx: convert to PHYLINK for improved PHY and MAC management
      - ksz: add KSZ8463 switch support
    - Intel:
      - support similar queue priority scheme in multi-queue and
        time-sensitive networking (taprio)
      - support packet pre-emption in both
    - RealTek (r8169):
      - enable EEE at 5Gbps on RTL8126
    - Airoha:
      - add PPPoE offload support
      - MDIO bus controller for Airoha AN7583
 
  - Ethernet PHYs:
    - support for the IPQ5018 internal GE PHY
    - micrel KSZ9477 switch-integrated PHYs:
      - add MDI/MDI-X control support
      - add RX error counters
      - add cable test support
      - add Signal Quality Indicator (SQI) reporting
    - dp83tg720: improve reset handling and reduce link recovery time
    - support bcm54811 (and its MII-Lite interface type)
    - air_en8811h: support resume/suspend
    - support PHY counters for QCA807x and QCA808x
    - support WoL for QCA807x
 
  - CAN drivers:
    - rcar_canfd: support for Transceiver Delay Compensation
    - kvaser: report FW versions via devlink dev info
 
  - WiFi:
    - extended regulatory info support (6 GHz)
    - add statistics and beacon monitor for Multi-Link Operation (MLO)
    - support S1G aggregation, improve S1G support
    - add Radio Measurement action fields
    - support per-radio RTS threshold
    - some work around how FIPS affects wifi, which was wrong (RC4 is used
      by TKIP, not only WEP)
    - improvements for unsolicited probe response handling
 
  - WiFi drivers:
    - RealTek (rtw88):
      - IBSS mode for SDIO devices
    - RealTek (rtw89):
      - BT coexistence for MLO/WiFi7
      - concurrent station + P2P support
      - support for USB devices RTL8851BU/RTL8852BU
    - Intel (iwlwifi):
      - use embedded PNVM in (to be released) FW images to fix
        compatibility issues
      - many cleanups (unused FW APIs, PCIe code, WoWLAN)
      - some FIPS interoperability
    - MediaTek (mt76):
      - firmware recovery improvements
      - more MLO work
    - Qualcomm/Atheros (ath12k):
      - fix scan on multi-radio devices
      - more EHT/Wi-Fi 7 features
      - encapsulation/decapsulation offload
    - Broadcom (brcm80211):
      - support SDIO 43751 device
 
  - Bluetooth:
    - hci_event: add support for handling LE BIG Sync Lost event
    - ISO: add socket option to report packet seqnum via CMSG
    - ISO: support SCM_TIMESTAMPING for ISO TS
 
  - Bluetooth drivers:
    - intel_pcie: support Function Level Reset
    - nxpuart: add support for 4M baudrate
    - nxpuart: implement powerup sequence, reset, FW dump, and FW loading
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmiFgLgACgkQMUZtbf5S
 IrvafxAAnQRwYBoIG+piCILx6z5pRvBGHkmEQ4AQgSCFuq2eO3ubwMFIqEybfma1
 5+QFjUZAV3OgGgKRBS2KGWxtSzdiF+/JGV1VOIN67sX3Mm0a2QgjA4n5CgKL0FPr
 o6BEzjX5XwG1zvGcBNQ5BZ19xUUKjoZQgTtnea8sZ57Fsp5RtRgmYRqoewNvNk/n
 uImh0NFsDVb0UeOpSzC34VD9l1dJvLGdui4zJAjno/vpvmT1DkXjoK419J/r52SS
 X+5WgsfJ6DkjHqVN1tIhhK34yWqBOcwGFZJgEnWHMkFIl2FqRfFKMHyqtfLlVnLA
 mnIpSyz8Sq2AHtx0TlgZ3At/Ri8p5+yYJgHOXcDKyABa8y8Zf4wrycmr6cV9JLuL
 z54nLEVnJuvfDVDVJjsLYdJXyhMpZFq6+uAItdxKaw8Ugp/QqG4QtoRj+XIHz4ZW
 z6OohkCiCzTwEISFK+pSTxPS30eOxq43kCspcvuLiwCCStJBRkRb5GdZA4dm7LA+
 1Od4ADAkHjyrFtBqTyyC2scX8UJ33DlAIpAYyIeS6w9Cj9EXxtp1z33IAAAZ03MW
 jJwIaJuc8bK2fWKMmiG7ucIXjPo4t//KiWlpkwwqLhPbjZgfDAcxq1AC2TLoqHBL
 y4EOgKpHDCMAghSyiFIAn2JprGcEt8dp+11B0JRXIn4Pm/eYDH8=
 =lqbe
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...
 2025-07-30 08:58:55 -07:00
Linus Torvalds
53edfecef6 Power management updates for 6.17-rc1 
- Fix two initialization ordering issues in the cpufreq core and a
    governor initialization error path in it, and clean it up (Lifeng
    Zheng)
 
  - Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq
    driver (Li RongQing)
 
  - Make intel_pstate always use HWP_DESIRED_PERF when operating in the
    passive mode (Rafael Wysocki)
 
  - Allow building the tegra124 cpufreq driver as a module (Aaron Kling)
 
  - Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
    entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn)
 
  - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
    Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
 
  - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant
    Malani)
 
  - Fix minimum performance state label error in the amd-pstate driver
    documentation (Shouye Liu)
 
  - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
    governor and explain HW coordination influence on it in the
    documentation (Shashank Balaji)
 
  - Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle
    driver (Yury Norov)
 
  - Remove info about non-existing QoS interfaces from the PM QoS
    documentation (Ulf Hansson)
 
  - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
 
  - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
 
  - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
 
  - Simplify the sun8i-a33-mbus devfreq driver by using more devm
    functions (Uwe Kleine-König)
 
  - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
 
  - Check devfreq governor before using governor->name (Lifeng Zheng)
 
  - Remove a redundant devfreq_get_freq_range() call from
    devfreq_add_device() (Lifeng Zheng)
 
  - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
 
  - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
 
  - Extend the asynchronous suspend and resume of devices to handle
    suppliers like parents and consumers like children (Rafael Wysocki)
 
  - Make pm_runtime_force_resume() work for drivers that set the
    DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
    collaborate with the general ACPI PM domain to set it (Rafael
    Wysocki)
 
  - Add kernel parameter to disable asynchronous suspend/resume of
    devices (Tudor Ambarus)
 
  - Drop redundant might_sleep() calls from some functions in the device
    suspend/resume core code (Zhongqiu Han)
 
  - Fix the handling of monitors connected right before waking up the
    system from sleep (tuhaowen)
 
  - Clean up MAINTAINERS entries for suspend and hibernation (Rafael
    Wysocki)
 
  - Fix error code path in the KEXEC_JUMP flow and drop a redundant
    pm_restore_gfp_mask() call from it (Rafael Wysocki)
 
  - Rearrange suspend/resume error handling in the core device suspend
    and resume code (Rafael Wysocki)
 
  - Fix up white space that does not follow coding style in the
    hibernation core code (Darshan Rathod)
 
  - Document return values of suspend-related API functions in the
    runtime PM framework (Sakari Ailus)
 
  - Mark last busy stamp in multiple autosuspend-related functions in the
    runtime PM framework and update its documentation (Sakari Ailus)
 
  - Take active children into account in pm_runtime_get_if_in_use() for
    consistency (Rafael Wysocki)
 
  - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
    power capping driver (Sivan Zohar-Kotzer)
 
  - Add support for the Bartlett Lake platform to the Intel RAPL power
    capping driver (Qiao Wei)
 
  - Add PL4 support for Panther Lake to the intel_rapl_msr power capping
    driver (Zhang Rui)
 
  - Update contact information in the PM ABI docs and maintainer
    information in the power domains DT binding (Rafael Wysocki)
 
  - Update PM header inclusions to follow the IWYU (Include What You Use)
    principle (Andy Shevchenko)
 
  - Add flags to specify power on attach/detach for PM domains, make the
    driver core detach PM domains in device_unbind_cleanup(), and drop
    the dev_pm_domain_detach() call from the platform bus type (Claudiu
    Beznea)
 
  - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
 
  - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/wC4SHHJqd0Byand5
 c29ja2kubmV0AAoJEO5fvZ0v1OO1O6MIAJtfclAleksv+PzbEyC+yk72zKinJg35
 WJUk4Kz1yMOqAPazbpXRXt1tuxqyB3HWeixnTFyZbz+bbhZjYJ0lvpWGkdsFaS0i
 NSbILSpHNGtOrP6s6hVKTBmLAdAzdWYWMQizlWgGrkhOiN5BnQzL7pAi2aGqu9KS
 tGqnIg/3QwBAvnxijgpkm7qozOUMPJ9dzSvxMaFeB6JH7SNbTOODVFtsoD+mbJlH
 YVMMWxih8b4MRJgAo4N2bL1Glp/Qnwg4ACawnQokt8Rknbtwku57QF9YwTbubr36
 Ok7qbNnUSx0h9KtMQQNogLLkFreTJkbGknVWEwaWWhXNeW9l4cr6MWo=
 =xVF9
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "As is tradition, cpufreq is the part with the largest number of
  updates that include core fixes and cleanups as well as updates of
  several assorted drivers, but there are also quite a few updates
  related to system sleep, mostly focused on asynchronous suspend and
  resume of devices and on making the integration of system suspend
  and resume with runtime PM easier.

  Runtime PM is also updated to allow some code duplication in drivers
  to be eliminated going forward and to work more consistently overall
  in some cases.

  Apart from that, there are some driver core updates related to PM
  domains that should help to address ordering issues with devm_ cleanup
  routines relying on PM domains, some assorted devfreq updates
  including core fixes and cleanups, tooling updates, and documentation
  and MAINTAINERS updates.

  Specifics:

   - Fix two initialization ordering issues in the cpufreq core and a
     governor initialization error path in it, and clean it up (Lifeng
     Zheng)

   - Add Granite Rapids support in no-HWP mode to the intel_pstate
     cpufreq driver (Li RongQing)

   - Make intel_pstate always use HWP_DESIRED_PERF when operating in the
     passive mode (Rafael Wysocki)

   - Allow building the tegra124 cpufreq driver as a module (Aaron
     Kling)

   - Do minor cleanups for Rust cpufreq and cpumask APIs and fix
     MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
     Bulwahn)

   - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)

   - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
     (Prashant Malani)

   - Fix minimum performance state label error in the amd-pstate driver
     documentation (Shouye Liu)

   - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
     governor and explain HW coordination influence on it in the
     documentation (Shashank Balaji)

   - Fix opencoded for_each_cpu() in idle_state_valid() in the DT
     cpuidle driver (Yury Norov)

   - Remove info about non-existing QoS interfaces from the PM QoS
     documentation (Ulf Hansson)

   - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)

   - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)

   - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)

   - Simplify the sun8i-a33-mbus devfreq driver by using more devm
     functions (Uwe Kleine-König)

   - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)

   - Check devfreq governor before using governor->name (Lifeng Zheng)

   - Remove a redundant devfreq_get_freq_range() call from
     devfreq_add_device() (Lifeng Zheng)

   - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)

   - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)

   - Extend the asynchronous suspend and resume of devices to handle
     suppliers like parents and consumers like children (Rafael Wysocki)

   - Make pm_runtime_force_resume() work for drivers that set the
     DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
     collaborate with the general ACPI PM domain to set it (Rafael
     Wysocki)

   - Add kernel parameter to disable asynchronous suspend/resume of
     devices (Tudor Ambarus)

   - Drop redundant might_sleep() calls from some functions in the
     device suspend/resume core code (Zhongqiu Han)

   - Fix the handling of monitors connected right before waking up the
     system from sleep (tuhaowen)

   - Clean up MAINTAINERS entries for suspend and hibernation (Rafael
     Wysocki)

   - Fix error code path in the KEXEC_JUMP flow and drop a redundant
     pm_restore_gfp_mask() call from it (Rafael Wysocki)

   - Rearrange suspend/resume error handling in the core device suspend
     and resume code (Rafael Wysocki)

   - Fix up white space that does not follow coding style in the
     hibernation core code (Darshan Rathod)

   - Document return values of suspend-related API functions in the
     runtime PM framework (Sakari Ailus)

   - Mark last busy stamp in multiple autosuspend-related functions in
     the runtime PM framework and update its documentation (Sakari
     Ailus)

   - Take active children into account in pm_runtime_get_if_in_use() for
     consistency (Rafael Wysocki)

   - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
     power capping driver (Sivan Zohar-Kotzer)

   - Add support for the Bartlett Lake platform to the Intel RAPL power
     capping driver (Qiao Wei)

   - Add PL4 support for Panther Lake to the intel_rapl_msr power
     capping driver (Zhang Rui)

   - Update contact information in the PM ABI docs and maintainer
     information in the power domains DT binding (Rafael Wysocki)

   - Update PM header inclusions to follow the IWYU (Include What You
     Use) principle (Andy Shevchenko)

   - Add flags to specify power on attach/detach for PM domains, make
     the driver core detach PM domains in device_unbind_cleanup(), and
     drop the dev_pm_domain_detach() call from the platform bus type
     (Claudiu Beznea)

   - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)

   - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
     Shenoy)"

* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
  PM: docs: Use my kernel.org address in ABI docs and DT bindings
  PM: hibernate: Fix up white space that does not follow coding style
  PM: sleep: Rearrange suspend/resume error handling in the core
  Documentation: amd-pstate:fix minimum performance state label error
  PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
  kexec_core: Drop redundant pm_restore_gfp_mask() call
  kexec_core: Fix error code path in the KEXEC_JUMP flow
  PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
  drivers: cpufreq: add Tegra114 support
  rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
  cpufreq: Exit governor when failed to start old governor
  cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
  cpufreq: Init policy->rwsem before it may be possibly used
  cpufreq: Initialize cpufreq-based frequency-invariance later
  cpufreq: Remove duplicate check in __cpufreq_offline()
  cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
  cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
  cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
  PM / devfreq: Add HiSilicon uncore frequency scaling driver
  ...
 2025-07-28 20:13:36 -07:00
Jakub Kicinski
8b5a19b4ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR (net-6.16-rc8).

Conflicts:

drivers/net/ethernet/microsoft/mana/gdma_main.c
  9669ddda18 ("net: mana: Fix warnings for missing export.h header inclusion")
  7553911210 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au

Adjacent changes:

drivers/net/ethernet/ti/icssg/icssg_prueth.h
  6e86fb73de ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
  ffe8a49091 ("net: ti: icssg-prueth: Read firmware-names from device tree")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-07-24 11:10:46 -07:00
Imre Deak
d34d6feaf4
drm/dp: Change AUX DPCD probe address from LANE0_1_STATUS to TRAINING_PATTERN_SET 
Commit a3ef3c2da6 ("drm/dp: Change AUX DPCD probe address from
DPCD_REV to LANE0_1_STATUS") stopped using the DPCD_REV register for
DPCD probing, since this results in link training failures at least when
using an Intel Barlow Ridge TBT hub at UHBR link rates (the
DP_INTRA_HOP_AUX_REPLY_INDICATION never getting cleared after the failed
link training). Since accessing DPCD_REV during link training is
prohibited by the DP Standard, LANE0_1_STATUS (0x202) was used instead,
as it falls within the Standard's valid register address range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) and it fixed the link
training on the above TBT hub.

However, reading the LANE0_1_STATUS register also has a side-effect at
least on a Novatek eDP panel, as reported on the Closes: link below,
resulting in screen flickering on that panel. One clear side-effect when
doing the 1-byte probe reads from LANE0_1_STATUS during link training
before reading out the full 6 byte link status starting at the same
address is that the panel will report the link training as completed
with voltage swing 0. This is different from the normal, flicker-free
scenario when no DPCD probing is done, the panel reporting the link
training complete with voltage swing 2.

Using the TRAINING_PATTERN_SET register for DPCD probing doesn't have
the above side-effect, the panel will link train with voltage swing 2 as
expected and it will stay flicker-free. This register is also in the
above valid register range and is unlikely to have a side-effect as that
of LANE0_1_STATUS: Reading LANE0_1_STATUS is part of the link training
CR/EQ sequences and so it may cause a state change in the sink - even if
inadvertently as I suspect in the case of the above Novatek panel. As
opposed to this, reading TRAINING_PATTERN_SET is not part of the link
training sequence (it must be only written once at the beginning of the
CR/EQ sequences), so it's unlikely to cause any state change in the
sink.

As a side-note, this Novatek panel also lacks support for TPS3, while
claiming support for HBR2, which violates the DP Standard (the Standard
mandating TPS3 for HBR2).

Besides the Novatek panel (PSR 1), which this change fixes, I also
verified the change on a Samsung (PSR 1) and an Analogix (PSR 2) eDP
panel as well as on the Intel Barlow Ridge TBT hub.

Note that in the drm-tip tree (targeting the v6.17 kernel version) the
i915 and xe drivers keep DPCD probing enabled only for the panel known
to require this (HP ZR24w), hence those drivers in drm-tip are not
affected by the above problem.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: a3ef3c2da6 ("drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS")
Reported-and-tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14558
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250708212331.112898-1-imre.deak@intel.com
(cherry picked from commit bba9aa41654036534d86b198f5647a9ce15ebd7f)
[Imre: Rebased on drm-intel-fixes]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Changed original commit hash to match with the one propagated in fixes]
 2025-07-15 09:37:57 -04:00
Andy Yan
5d156a9c3d drm/bridge: Pass down connector to drm bridge detect hook 
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.

In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.

Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-07-14 18:23:18 +03:00
Andy Yan
02bb63d1a5 drm/bridge: Make dp/hdmi_audio_* callback keep the same paramter order with get_modes 
Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-07-14 18:23:18 +03:00
Maarten Lankhorst
e21354aea4 Merge remote-tracking branch 'drm/drm-next' into drm-misc-next 
Pull in drm-intel-next for the updates to drm panic handling.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
 2025-07-08 16:49:07 +02:00
Claudiu Beznea
d42c7c6fd6 PM: domains: Add flags to specify power on attach/detach 
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.

If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.

The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.

Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().

Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().

Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.

This change is preparatory.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-07-07 20:41:20 +02:00
Dan Carpenter
e33f256dbc drm/dp: Clean up white space in drm_edp_backlight_probe_state() 
This code needs to be indented one more tab.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/30b896c2-ae71-4cf2-9511-2713da7e1632@sabinyo.mountain
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-07-06 14:49:00 +03:00
Cristian Ciocaltea
19920ab98e drm/display: hdmi-cec-helper: Fix adapter unregistration 
Attempting to reload a kernel module of an HDMI driver making use of the
new CEC helpers revealed a resource deallocation issue, i.e. the entries
in /dev/cec* keep growing.

Moreover, after a couple of tries the kernel crashes and the whole
system freezes:

[   47.515950] Unable to handle kernel paging request at virtual address 0020072007200778
[...]
[   47.521707] Internal error: Oops: 0000000096000004 [#1]  SMP
[...]
[   47.537597] Call trace:
[   47.537815]  klist_next+0x20/0x1b8 (P)
[   47.538152]  device_reorder_to_tail+0x74/0x120
[   47.538548]  device_reorder_to_tail+0x6c/0x120
[   47.538944]  device_pm_move_to_tail+0x78/0xd0
[   47.539334]  deferred_probe_work_func+0x9c/0x110
[   47.539747]  process_one_work+0x328/0x638
[   47.540108]  worker_thread+0x264/0x390
[   47.540445]  kthread+0x20c/0x230
[   47.540735]  ret_from_fork+0x10/0x20

Do a proper cleanup by calling cec_unregister_adapter() instead of
cec_delete_adapter() in the managed release action handler.

Fixes: 8b1a8f8b20 ("drm/display: add CEC helpers code")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703-hdmi-cec-helper-unreg-fix-v1-1-7e7b0eb578bb@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-07-05 16:18:54 +03:00
Paolo Abeni
6b9fd8857b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Cross-merge networking fixes after downstream PR (net-6.16-rc5).

No conflicts.

No adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 2025-07-04 08:03:18 +02:00
Dave Airlie
17d081ef84 drm-misc-next for 6.17: 
UAPI Changes:
 
 Cross-subsystem Changes:
 
 Core Changes:
 
 - bridge: More reference counting
 - dp: Implement backlight control helpers
 - fourcc: Add half-float and 32b float formats, RGB161616, BGR161616
 - mipi-dsi: Drop MIPI_DSI_MODE_VSYNC_FLUSH flag
 - ttm: Improve eviction
 
 Driver Changes:
 - i915: Use backlight control helpers for eDP
 - tidss: Add AM65x OLDI bridge support
 
 - panels:
   - panel-edp: Add CMN N116BCJ-EAK support
   - raydium-rm67200: misc cleanups, optional reset
   - new panel: DJN HX83112B
 -----BEGIN PGP SIGNATURE-----
 
 iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaGY7aQAKCRAnX84Zoj2+
 dncVAYC+7mGk8UDugcIEn51fCLxv92DKeMRq/qsmGPz/x5c3TaXX7sN0/FLo91ek
 bLrwR9ABfjx+Qz+jO21LuwRBxgHv7XH5Bk1sPay1n7+TokndCj55+YG8vCbXISsk
 gsxtheA8Ig==
 =ybn3
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2025-07-03' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.17:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

- bridge: More reference counting
- dp: Implement backlight control helpers
- fourcc: Add half-float and 32b float formats, RGB161616, BGR161616
- mipi-dsi: Drop MIPI_DSI_MODE_VSYNC_FLUSH flag
- ttm: Improve eviction

Driver Changes:
- i915: Use backlight control helpers for eDP
- tidss: Add AM65x OLDI bridge support

- panels:
  - panel-edp: Add CMN N116BCJ-EAK support
  - raydium-rm67200: misc cleanups, optional reset
  - new panel: DJN HX83112B

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250703-chirpy-lilac-dalmatian-2c5838@houat
 2025-07-04 11:54:31 +10:00
Suraj Kandpal
ba02bf8e86 drm/dp: Enable backlight control using luminance 
Add flag to enable brightness control via luminance value
when enabling edp backlight.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-11-suraj.kandpal@intel.com
 2025-06-30 20:41:48 +05:30
Suraj Kandpal
05a76aef23 drm/dp: Change argument type of drm_edp_backlight_enable 
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.

--v2
-No need to typecast [Jani]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
 2025-06-30 20:41:47 +05:30
Suraj Kandpal
f2db78e37f drm/dp: Modify drm_edp_backlight_set_level 
Modify drm_edp_backlight_set_level to be able to set the value
for register in DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We multiply
the level with 1000 since we get the value in Nits and the
register accepts it in milliNits.

--v2
-Add comment regarding the unit [Arun]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-9-suraj.kandpal@intel.com
 2025-06-30 20:41:46 +05:30
Suraj Kandpal
2ff7f0c381 drm/dp: Change argument type for drm_edp_backlight_set_level 
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.

--v2
-Typecase is not needed [Jani]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
 2025-06-30 20:41:45 +05:30
Suraj Kandpal
c38da578a8 drm/dp: Modify drm_edp_probe_state 
Modify drm_edp_probe_state to read current level from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We divide it by
1000 since the value in this register is in millinits.

--v2
-Add comment on the unit sent back [Arun]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-7-suraj.kandpal@intel.com
 2025-06-30 20:41:44 +05:30
Suraj Kandpal
9274a940f1 drm/dp: Change current_level argument type to u32 
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
 2025-06-30 20:41:42 +05:30
Suraj Kandpal
08e81e2ded drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info 
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
 2025-06-30 20:41:41 +05:30
Suraj Kandpal
81fd01414f drm/dp: Add argument for max luminance in drm_edp_backlight_init 
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.

--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
 2025-06-30 20:41:39 +05:30
Suraj Kandpal
c802a6b81b drm/dp: Add argument in drm_edp_backlight_init 
Add bool argument in drm_edp_backlight init to provide the drivers
option to choose if they want to use luminance values to
manipulate brightness.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
 2025-06-30 20:41:38 +05:30
Suraj Kandpal
2af612ad42 drm/dp: Introduce new member in drm_backlight_info 
Introduce luminance_set flag which indicates if we can manipulate
backlight using luminance value or not which is only possible
after eDP v1.5.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-2-suraj.kandpal@intel.com
 2025-06-30 20:41:37 +05:30
Dave Airlie
9fbceb37c9 Merge tag 'drm-misc-fixes-2025-06-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes 
drm-misc-fixes for v6.16-rc4:
- Fix function signature of drm_writeback_connector_cleanup.
- Use correct HDMI audio bridge in drm_connector_hdmi_audio_init.
- Make HPD work on SN65DSI86.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/3dd1d5e1-73b6-4b0c-a208-f7d6235cf530@linux.intel.com
 2025-06-28 06:53:00 +10:00
Dave Airlie
f41830c57b drm-misc-next for 6.17: 
UAPI Changes:
 
 Cross-subsystem Changes:
 
 Core Changes:
 - ci: Add Device tree validation and kunit
 - connector: Move HDR sink metadat to drm_display_info
 
 Driver Changes:
 - bochs: drm_panic Support
 - panfrost: MT8370 Support
 
 - bridge:
   - tc358767: Convert to devm_drm_bridge_alloc()
 -----BEGIN PGP SIGNATURE-----
 
 iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaFz/WQAKCRAnX84Zoj2+
 dkleAYCy2fVEqt/1/A9UDlpfxEQi52JvmmxQPRo34iDb2sB1MdWseNC4fqYNtrUe
 LpVma94BfjfKq+UTvsj4SSEuhRFVQty+x8yjXZIj4ckBD2MP1B2+NfQrhDKMTeWP
 /s0b2UaLQw==
 =tS63
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2025-06-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.17:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- ci: Add Device tree validation and kunit
- connector: Move HDR sink metadat to drm_display_info

Driver Changes:
- bochs: drm_panic Support
- panfrost: MT8370 Support

- bridge:
  - tc358767: Convert to devm_drm_bridge_alloc()

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250626-sincere-loon-of-effort-6dbdf9@houat
 2025-06-27 09:58:05 +10:00
Chaoyi Chen
1035782415 drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init() 
The bridge used in drm_connector_hdmi_audio_init() does not correctly
point to the required audio bridge, which lead to incorrect audio
configuration input.

Fixes: 231adeda9f ("drm/bridge-connector: hook DisplayPort audio support")
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250620011616.118-1-kernel@airkyi.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-06-24 01:17:21 +03:00
Jani Nikula
1174bf15bd drm/connector: move HDR sink metadata to display info 
Information parsed from the display EDID should be stored in display
info. Move HDR sink metadata there.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250519112900.1383997-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
 2025-06-23 21:44:55 +03:00
Imre Deak
a3ef3c2da6 drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS 
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see

3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates

Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.

Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.

Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
(cherry picked from commit a40c5d727b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
 2025-06-23 15:53:42 +03:00
Dave Airlie
36c52fb703 Merge tag 'drm-intel-next-2025-06-18' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next 
drm/i915 feature pull for v6.17:

Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)

Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)

Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)

DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)

Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
 2025-06-23 10:49:27 +10:00
Jeff Layton
707bd05be7 ref_tracker: eliminate the ref_tracker_dir name field 
Now that we have dentries and the ability to create meaningful symlinks
to them, don't keep a name string in each tracker. Switch the output
format to print "class@address", and drop the name field.

Also, add a kerneldoc header for ref_tracker_dir_init().

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-9-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-06-19 17:02:04 -07:00
Jeff Layton
aa7d26c3c3 ref_tracker: add a static classname string to each ref_tracker_dir 
A later patch in the series will be adding debugfs files for each
ref_tracker that get created in ref_tracker_dir_init(). The format will
be "class@%px". The current "name" string can vary between
ref_tracker_dir objects of the same type, so it's not suitable for this
purpose.

Add a new "class" string to the ref_tracker dir that describes the
the type of object (sans any individual info for that object).

Also, in the i915 driver, gate the creation of debugfs files on whether
the dentry pointer is still set to NULL. CI has shown that the
ref_tracker_dir can be initialized more than once.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-4-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2025-06-19 17:02:04 -07:00
Thomas Zimmermann
8f194494fd drm/display: Include <linux/export.h> 
Fix the compile-time warnings

  drivers/gpu/drm/display/drm_bridge_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_dp_aux_bus.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_dp_cec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_dp_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_dp_mst_topology.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_dp_tunnel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_dsc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_hdmi_audio_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_hdmi_cec_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_hdmi_cec_notifier_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_hdmi_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_hdmi_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
  drivers/gpu/drm/display/drm_scdc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612121633.229222-6-tzimmermann@suse.de
 2025-06-16 09:02:32 +02:00
Imre Deak
b87ed522b3 drm/dp: Add an EDID quirk for the DPCD register access probe 
Reading DPCD registers has side-effects and some of these can cause a
problem for instance during link training. Based on this it's better to
avoid the probing quirk done before each DPCD register read, limiting
this to the monitor which requires it. Add an EDID quirk for this. Leave
the quirk enabled by default, allowing it to be disabled after the
monitor is detected.

v2: Fix lockdep wrt. drm_dp_aux::hw_mutex when calling
    drm_dp_dpcd_set_probe_quirk() with a dependent lock already held.
v3: Add a helper for determining if DPCD probing is needed. (Jani)
v4:
- s/drm_dp_dpcd_set_probe_quirk/drm_dp_dpcd_set_probe (Jani)
- Fix documentation of drm_dp_dpcd_set_probe().
- Add comment at the end of internal quirk entries.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250609125556.109538-1-imre.deak@intel.com
 2025-06-12 20:44:01 +03:00
Imre Deak
a40c5d727b drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS 
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see

3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates

Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.

Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.

Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
 2025-06-12 20:41:49 +03:00
Thomas Zimmermann
c598d5eb9f Merge drm/drm-next into drm-misc-next 
Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
 2025-06-11 09:01:34 +02:00
Maxime Ripard
7b1166dee8 drm for 6.16-rc1 
new drivers:
 - bring in the asahi uapi header standalone
 - nova-drm: stub driver
 
 rust dependencies (for nova-core):
 - auxiliary
   - bus abstractions
   - driver registration
   - sample driver
 - devres changes from driver-core
 - revocable changes
 
 core:
 - add Apple fourcc modifiers
 - add virtio capset definitions
 - extend EXPORT_SYNC_FILE for timeline syncobjs
 - convert to devm_platform_ioremap_resource
 - refactor shmem helper page pinning
 - DP powerup/down link helpers
 - remove disgusting turds
 - extended %p4cc in vsprintf.c to support fourcc prints
 - change vsprintf %p4cn to %p4chR, remove %p4cn
 - Add drm_file_err function
 - IN_FORMATS_ASYNC property
 - move sitronix from tiny to their own subdir
 
 rust:
 - add drm core infrastructure rust abstractions
   (device/driver, ioctl, file, gem)
 
 dma-buf:
 - adjust sg handling to not cache map on attach
 - allow setting dma-device for import
 - Add a helper to sort and deduplicate dma_fence arrays
 
 docs:
 - updated drm scheduler docs
 - fbdev todo update
 - fb rendering
 - actual brightness
 
 ttm:
 - fix delayed destroy resv object
 
 bridge:
 - add kunit tests
 - convert tc358775 to atomic
 - convert drivers to devm_drm_bridge_alloc
 - convert rk3066_hdmi to bridge driver
 
 scheduler:
 - add kunit tests
 
 panel:
 - refcount panels to improve lifetime handling
 - Powertip PH128800T004-ZZA01
 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00
 - Himax HX8279/HX8279-D DDIC
 - Visionox G2647FB105
 - Sitronix ST7571
 - ZOTAC rotation quirk
 
 vkms:
 - allow attaching more displays
 
 i915:
 - xe3lpd display updates
 - vrr refactor
 - intel_display struct conversions
 - xe2hpd memory type identification
 - add link rate/count to i915_display_info
 - cleanup VGA plane handling
 - refactor HDCP GSC
 - fix SLPC wait boosting reference counting
 - add 20ms delay to engine reset
 - fix fence release on early probe errors
 
 xe:
 - SRIOV updates
 - BMG PCI ID update
 - support separate firmware for each GT
 - SVM fix, prelim SVM multi-device work
 - export fan speed
 - temp disable d3cold on BMG
 - backup VRAM in PM notifier instead of suspend/freeze
 - update xe_ttm_access_memory to use GPU for non-visible access
 - fix guc_info debugfs for VFs
 - use copy_from_user instead of __copy_from_user
 - append PCIe gen5 limitations to xe_firmware document
 
 amdgpu:
 - DSC cleanup
 - DC Scaling updates
 - Fused I2C-over-AUX updates
 - DMUB updates
 - Use drm_file_err in amdgpu
 - Enforce isolation updates
 - Use new dma_fence helpers
 - USERQ fixes
 - Documentation updates
 - SR-IOV updates
 - RAS updates
 - PSP 12 cleanups
 - GC 9.5 updates
 - SMU 13.x updates
 - VCN / JPEG SR-IOV updates
 
 amdkfd:
 - Update error messages for SDMA
 - Userptr updates
 - XNACK fixes
 
 radeon:
 - CIK doorbell cleanup
 
 nouveau:
 - add support for NVIDIA r570 GSP firmware
 - enable Hopper/Blackwell support
 
 nova-core:
 - fix task list
 - register definition infrastructure
 - move firmware into own rust module
 - register auxiliary device for nova-drm
 
 nova-drm:
 - initial driver skeleton
 
 msm:
 - GPU:
   - ACD (adaptive clock distribution) for X1-85
   - drop fictional address_space_size
   - improve GMU HFI response time out robustness
   - fix crash when throttling during boot
 - DPU:
   - use single CTL path for flushing on DPU 5.x+
   - improve SSPP allocation code for better sharing
   - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
   - Added SAR2130P support
   - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
 - DP:
   - switch to new audio helpers
   - better LTTPR handling
 - DSI:
   - Added support for SA8775P
   - Added SAR2130P support
 - HDMI:
   - Switched to use new helpers for ACR data
   - Fixed old standing issue of HPD not working in some cases
 
 amdxdna:
 - add dma-buf support
 - allow empty command submits
 
 renesas:
 - add dma-buf support
 - add zpos, alpha, blend support
 
 panthor:
 - fail properly for NO_MMAP bos
 - add SET_LABEL ioctl
 - debugfs BO dumping support
 
 imagination:
 - update DT bindings
 - support TI AM68 GPU
 
 hibmc:
 - improve interrupt handling and HPD support
 
 virtio:
 - add panic handler support
 
 rockchip:
 - add RK3588 support
 - add DP AUX bus panel support
 
 ivpu:
 - add heartbeat based hangcheck
 
 mediatek:
 - prepares support for MT8195/99 HDMIv2/DDCv2
 
 anx7625:
 - improve HPD
 
 tegra:
 - speed up firmware loading
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmg2aVAACgkQDHTzWXnE
 hr6DjhAApr2fZjugU3EmpsARdcIWgEd+X65R97ef7RlUGqBKm2joSwZGOhH0oBsG
 9WyO92Qzu6XMe8OibKqY4D2hir9UPz5v+uEWe3q9CzZGbNyAwyVRjVkaKpnI9upv
 1dmHFI7HgPu6qbz6RfPIfgALBLXvVXMaQ4+ZgN/cLtZFa+OLAV5ByqWsRPPXZFb0
 F/pQGQ4ursglfA+LH3SVPfnTN53lu93IlM5/Os9OQQGj+44w94zQ6DCm7CY1AugH
 n+RM/0Yv7WaoF1ByeOtq4FcrmLRrd+ozsvITbRZqhOx7zS/mhP8LRzAwgKWOYzSh
 puKunyQiSdHR7FSqSi8uyY3YumcLWNa/17LMKoTf+KqweJbKGE7RVBuFBn6WUdPb
 AYHZrSB4USAeyahdrrsU+q7ltu5urs5ckpbXsRurMiaUz/BLim1PIm3N5FDLPY7B
 PD1n1FcMUv3CmJT5Y+aNIQgmf1/dETESRTSAgSoOo3gNp6jdRCYqSuWIBsppibWT
 26+tyz0/FGhE50QviHzg0Sv+jd/g93fN6snNlV8wNFMviq3bC69Toa+y3qJ5e7UC
 /42R7nCWdkCZJfr6E67rOaahe9TDV/LXLqPErwptOkdK8sMchaIgF+deybgTtTi/
 zGRBfjLvb5ocYBmPbeGX4mtXNRpyZ3o9I0QUyGUO4zMwFXmFwn0=
 =jpVr
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaD7zuQAKCRAnX84Zoj2+
 dv21AX4qAXMoS1eQQOzx5/MN0LhibwHO8lq0HgyhKKCMZTUvFP91hvuB6qKGzxEU
 +RJmN5cBgPGNuXwr9zLe5A/Lv1LWgfSj1DaAlauYvduFh1xyLOLuo0H3xfTsKrcl
 Onjxi5QVsg==
 =bMa5
 -----END PGP SIGNATURE-----

Merge drm-next-2025-05-28 into drm-misc-next

Christian needs a recent drm-next branch to merge fence patches.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-03 15:07:39 +02:00
Cristian Ciocaltea
04561845fc
drm/connector: hdmi: Use YUV420 output format as an RGB fallback 
Try to make use of YUV420 when computing the best output format and
RGB cannot be supported for any of the available color depths.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-6-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-02 11:02:33 +02:00
Cristian Ciocaltea
4809299add
drm/connector: hdmi: Factor out bpc and format computation logic 
In preparation to support fallback to an alternative output format, e.g.
YUV420, when RGB cannot be used for any of the available color depths,
move the bpc try loop out of hdmi_compute_config() and, instead, make it
part of hdmi_compute_format(), while adding a new parameter to the
latter holding the output format to be checked and eventually set.

Since this helper now also changes hdmi.output_bpc in addition to
hdmi.output_format, highlight the extended functionality by renaming it
to hdmi_compute_format_bpc().

This improves code reusability and further extensibility, without
introducing any functional changes.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-5-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-02 11:02:32 +02:00
Cristian Ciocaltea
b01ea9acde
drm/connector: hdmi: Add missing bpc debug info to hdmi_try_format_bpc() 
The very first debug message in hdmi_try_format_bpc() is incomplete, as
it doesn't provide the given bpc in addition to the tried format.

Add the missing debug information and drop the now redundant message
from hdmi_compute_config().

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-4-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-02 11:02:32 +02:00
Cristian Ciocaltea
a191077792
drm/connector: hdmi: Improve debug message for supported format 
Add the missing 'bpc' string to the debug message indicating the
supported format identified within hdmi_try_format_bpc() helper.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-3-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-02 11:02:31 +02:00
Cristian Ciocaltea
85b0db8741
drm/connector: hdmi: Add support for YUV420 format verification 
Provide the necessary constraints verification in
sink_supports_format_bpc() in order to support handling of YUV420
output format.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-2-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-02 11:02:31 +02:00
Cristian Ciocaltea
21f6271396
drm/connector: hdmi: Evaluate limited range after computing format 
Evaluating the requirement to use a limited RGB quantization range
involves a verification of the output format, among others, but this is
currently performed before actually computing the format, hence relying
on the old connector state.

Move the call to hdmi_is_limited_range() after hdmi_compute_config() to
ensure the verification is done on the updated output format.

Fixes: 027d435906 ("drm/connector: hdmi: Add RGB Quantization Range to the connector state")
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-1-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
 2025-06-02 11:02:30 +02:00
Nicolas Frattaroli
be9b3f9a54 drm/connector: only call HDMI audio helper plugged cb if non-null 
On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb
with NULL as the callback function and codec_dev, as seen in its
hdmi_remove function.

The HDMI audio helper then happily tries calling said null function
pointer, and produces an Oops as a result.

Fix this by only executing the callback if fn is non-null. This means
the .plugged_cb and .plugged_cb_dev members still get appropriately
cleared.

Fixes: baf616647f ("drm/connector: implement generic HDMI audio helpers")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-hdmi-audio-helper-remove-fix-v1-1-6cf77de364d8@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-27 23:08:21 +03:00
Dmitry Baryshkov
a74288c8de drm/display: bridge-connector: handle CEC adapters 
Implement necessary glue code to let DRM bridge drivers to implement CEC
adapters support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-9-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-21 01:35:21 +03:00
Dmitry Baryshkov
65a2575a68 drm/display: bridge-connector: hook in CEC notifier support 
Allow HDMI DRM bridges to create CEC notifier. Physical address is
handled automatically by drm_atomic_helper_connector_hdmi_hotplug()
being called from .detect() path.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-8-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-21 01:35:16 +03:00
Dmitry Baryshkov
603ce85427 drm/display: hdmi-state-helper: handle CEC physical address 
Call HDMI CEC helpers in order to update physical address of the
adapter.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-6-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-21 01:35:16 +03:00
Dmitry Baryshkov
8b1a8f8b20 drm/display: add CEC helpers code 
Add generic CEC helpers to be used by HDMI drivers. Both notifier and
and adapter are supported for registration. Once registered, the driver
can call common set of functions to update physical address, to
invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs
(which provides interface common to all implementations, including, but
not limited to the CEC adapter, CEC notifier, CEC pin-based adapter,
etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks
specific to the CEC adapter implementations.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-21 01:35:16 +03:00
Dmitry Baryshkov
bcc8553b62 drm/display: move CEC_CORE selection to DRM_DISPLAY_HELPER 
THe Kconfig symbol DRM_DISPLAY_DP_AUX_CEC is a boolean which simply
toggles whether DP_AUX_CEC support should be built into the
drm_display_helper (which can be eithera module or built-in into the
kernel). If DRM_DISPLAY_DP_AUX_CEC is selected, then CEC_CORE is
selected to be built-in into the kernel even if DRM_DISPLAY_HELPER is
selected to be built as a module. Move CEC_CORE selection to the latter
symbol in order to allow it to be built as a module.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-4-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-21 01:35:16 +03:00
Dmitry Baryshkov
d9f9bae675 drm/bridge: allow limiting I2S formats 
By default HDMI codec registers all formats supported on the I2S bus.
Allow bridges (and connectors) to limit the list of the PCM formats
supported by the HDMI codec.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-2-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
 2025-05-21 01:33:58 +03:00
Dave Airlie
f0ddbb1eed drm/dp: add option to disable zero sized address only transactions. 
Some older NVIDIA and some newer NVIDIA hardware/firmware seems to
have issues with address only transactions (firmware rejects them).

Add an option to the core drm dp to avoid address only transactions,
This just puts the MOT flag removal on the last message of the transfer
and avoids the start of transfer transaction.

This with the flag set in nouveau, allows eDP probing on GB203 device.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
 2025-05-19 07:14:45 +10:00