In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When driver is built with either CONFIG_DRM_I2C_ADV7511_AUDIO or
CONFIG_DRM_I2C_ADV7511_CEC disabled, drm_bridge_connector_init() is
expected to fail with -EINVAL. That is because all required audio (or
CEC) related callbacks in adv7511_bridge_funcs ended up being NULL.
Set DRM_BRIDGE_OP_HDMI_AUDIO and DRM_BRIDGE_OP_HDMI_CEC_ADAPTER bridge
ops only when the aforementioned kernel config options have been
enabled.
Fixes: ae01d3183d ("drm/bridge: adv7511: switch to the HDMI connector helpers")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-adv7511-bridge-ops-fix-v1-1-c1385922066e@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
adv7511_mode_set() currently updates only the sync registers of the ADV
bridge. At the end, drm_mode_copy() updates the current mode, but the
horizontal and vertical porch registers of the ADV bridge still retain
values from the old mode.
Move adv7511_dsi_config_timing_gen() into adv7511_mode_set() to ensure
the horizontal and vertical porch registers are correctly updated.
Fixes: ae01d3183d ("drm/bridge: adv7511: switch to the HDMI connector helpers")
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Closes: https://lore.kernel.org/all/aDB8bD6cF7qiSpKd@tom-desktop/
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250528070452.901183-2-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
devm_drm_bridge_alloc() is the new API to be used for allocating (and
partially initializing) a private driver struct embedding a struct
drm_bridge.
For many drivers having a simple code flow in the probe function, this
commit does a mass conversion automatically with the following semantic
patch. The changes have been reviewed manually for correctness as well as
to find any false positives.
The patch has been applied with the explicit exclusion of bridge/panel.c,
handled by a separate patch.
After applying the semantic patch, manually fixed these issues:
- 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling
devm_drm_bridge_alloc() returns a pointer
- re-added empty lines and comments that the script had removed but that
should stay
@@
type T;
identifier C;
identifier BR;
expression DEV;
expression FUNCS;
@@
-T *C;
+T *C;
...
(
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return -ENOMEM;
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
|
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return ERR_PTR(-ENOMEM);
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
)
...
-C->BR.funcs = FUNCS;
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c
Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com
[Luca: fixed trivial patch conflict in adv7511_drv.c while applying]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Rewrite the ADV7511 driver to use implementation provided by the DRM
HDMI connector framework, including the Audio and CEC bits. Drop the
in-bridge connector support and use drm_bridge_connector if the host
requires the connector to be provided by the bridge.
Note: currently only AVI InfoFrames are supported. Existing driver
doesn't support programming any other InfoFrames directly and Audio
InfoFrame seems to be programmed using individual bits and pieces rather
than programming it directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-10-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ADV7511 chip allows 24 bits samples max in I2S mode, excepted for
direct AES3 mode (SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE format).
However the HDMI codec exposes S32_LE format as supported.
Adapt ADV7511 HDMI I2S format list to expose formats actually supported.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108170356.413063-4-olivier.moysan@foss.st.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Set no_i2s_capture and no_spdif_capture flags in hdmi_codec_pdata structure
to report that the ADV7511 HDMI bridge does not support i2s or spdif audio
capture.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108170356.413063-2-olivier.moysan@foss.st.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use the atomic version of enable/disable.
To support bridges where bus format negotiation is needed such as TIDSS we
need to implement atomic_get_input_bus_fmts, prepare the driver for this by
switching the existing operations to it's atomic variants.
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106121054.96739-1-jesseevg@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmd7BBQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGfEEH/3oyTWmD5DPX2lLp
SujyKrEs6bfMQTKKYHzuy8OvzDXkBpZiKXIsCgjF5sXwQVgB7KPfJwgjt5xLo3F3
NTehLGwII7bM8mSq3wHDMeNkyBle4VYA9XOR8tXj21j7aRt9S4U/vtXiYeD9BWhC
Y1p+1FXKfZf7TjNpu8lIl+zLjSFDjYwM8h72dIuHnrYeuFL88fnWwoNP/MFkk5Kk
ce3ol3EtFe/M4GbVOm7KfzEkbsEE6ES60O0suxwYDn+71EA6ExVHFBKqpQvfj71/
ynxWYIwMoiCZWtJ+ali1g/ms0OxG+ivH8+xasBYTcDICZMe/XGX5Yx+Wm5DH5/Ev
pGMyvbI=
=yrc7
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc6' into drm-next
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove().
Fixes: 1e4d58cd7f ("drm/bridge: adv7533: Create a MIPI DSI device")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.
Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.
This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
Reported-by: Liu Ying <victor.liu@nxp.com>
Fixes: f3d9683346 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
V3: Remove unnecessary declaration of ret by evaluating the return
code of regmap_read directly.
V2: Fix uninitialized cec_status
Cut back a little on error handling to return either IRQ_NONE or
IRQ_HANDLED.
The connector is created by either this ADV7511 bridge driver or
any DRM device driver/previous bridge driver, so this ADV7511
bridge driver should not let the next bridge driver create connector.
If the next bridge is a HDMI connector, the next bridge driver
would fail to attach bridge from display_connector_attach() without
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
Add that flag to drm_bridge_attach() function call in
adv7511_bridge_attach() to fix the issue.
This fixes the issue where the HDMI connector bridge fails to attach
to the previous ADV7535 bridge on i.MX8MP EVK platform:
[ 2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /hdmi-connector to encoder None-37: -22
[ 2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/i2c@30a30000/hdmi@3d to encoder None-37: -22
[ 2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi@32e60000 to encoder None-37: -22
[ 2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed to attach bridge for endpoint0
[ 2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot connect bridge
[ 2.274009] imx-lcdif 32e80000.display-controller: probe with driver imx-lcdif failed with error -22
Fixes: 14b3cdbd0e ("drm/bridge: adv7511: make it honour next bridge in DT")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Sui Jingfeng <suijingfeng@bosc.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513080243.3952292-1-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In the adv7511_connector_init() function, the check on the existence of
bridge->encoder is not necessary. As it has already been checked in the
drm_bridge_attach() which happens prior to the adv7511_bridge_attach()
get called. Also note that the adv7511_connector_init() is only called by
adv7511_bridge_attach(). Hence, it is guaranteed that the .encoder member
of the drm_bridge instance is not NULL when adv7511_connector_init() get
called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-7-sui.jingfeng@linux.dev
The IRQ registration currently assumes that the GPIO is dedicated
to it, but that may not necessarily be the case. If the board has
another device sharing the GPIO, it won't be registered and the
hot-plug detect fails to function.
Currently, the handler reads two registers and blindly
assumes one of them caused the interrupt and returns IRQ_HANDLED
unless there is an error. In order to properly do this, the IRQ
handler needs to check if it needs to handle the IRQ and return
IRQ_NONE if there is nothing to handle. With the check added
and the return code properly indicating whether or not it there
was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ.
V2: Add check to see if there is IRQ data to handle
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305004859.201085-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Moved IRQ registration down to end of adv7511_probe().
If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:
Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
Call trace:
cec_received_msg_ts+0x48/0x990 [cec]
adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
adv7511_irq_process+0xd8/0x120 [adv7511]
adv7511_irq_handler+0x1c/0x30 [adv7511]
irq_thread_fn+0x30/0xa0
irq_thread+0x14c/0x238
kthread+0x190/0x1a8
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219-adv7511-cec-irq-crash-fix-v2-1-245e53c4b96f@bang-olufsen.dk
As per spec, it is allowed to pulse the HPD signal to indicate that the
EDID information has changed. Some monitors do this when they wake up
from standby or are enabled. When the HPD goes low the adv7511 is
reset and the outputs are disabled which might cause the monitor to
go to standby again. To avoid this we ignore the HPD pin for the
first few seconds after enabling the output. On the other hand,
adv7535 require to enable HPD Override bit for proper HPD.
Add hpd_override_enable variable to struct adv7511_chip_info to handle
this scenario.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-9-biju.das.jz@bp.renesas.com
The ADV7511 needs link configuration whereas ADV75{33,35} does not need
it. Add a variable link_config to struct adv7511_chip_info to handle
this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-8-biju.das.jz@bp.renesas.com
The ADV7533 and ADV7535 have an offset(0x70) for the CEC register map
compared to ADV7511. Add the reg_cec_offset variable to struct
adv7511_chip_info to handle this difference and drop the reg_cec_offset
variable from struct adv7511.
This will avoid assigning reg_cec_offset based on chip type and also
testing for multiple chip types by calling adv7533_patch_cec_registers().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-6-biju.das.jz@bp.renesas.com
The ADV7511 has 5 power supplies compared to 7 that of ADV75{33,35}. Add
supply_names and num_supplies variables to struct adv7511_chip_info to
handle this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-5-biju.das.jz@bp.renesas.com
The ADV7533 supports a maximum lane clock of 800MHz whereas it is 891MHz
for ADV7535. Add max_lane_freq_khz variable to struct adv7511_chip_info to
handle this difference.
While at it, drop the unused local variable max_lane_freq.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-4-biju.das.jz@bp.renesas.com
The ADV7533 supports a maximum pixel clock of 80MHz whereas it is 148.5MHz
for ADV7535. Add max_mode_clock_khz variable to struct adv7511_chip_info to
handle this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-3-biju.das.jz@bp.renesas.com
Add struct adv7511_chip_info to handle hw differences between various
chips rather checking against the 'type' variable in various places.
Replace 'adv->type'->'info->type' by moving variable 'type' from
struct adv7511 to struct adv7511_chip_info and add adv7511_chip_info as
device data for both OF and ID tables instead of the device type.
Simplify the probe() by replacing of_device_get_match_data() and ID lookup
for retrieving match data with i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830142358.275459-2-biju.das.jz@bp.renesas.com
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929-drm-adv7511-v1-1-b871b28ee594@kernel.org
For ADV7533 and ADV7535 low refresh rate is selected using
bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.
Fixes: 2437e7cd88 ("drm/bridge: adv7533: Initial support for ADV7533")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526090709.1517297-1-u.kleine-koenig@pengutronix.de
When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.
This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.
Fixes: 9a0cdcd664 ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-15-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
adv7511 probe may need to be attempted multiple times before no
-EPROBE_DEFER is returned. Currently, every such probe results in
an error message:
[ 4.534229] adv7511 1-003d: failed to find dsi host
[ 4.580288] adv7511 1-003d: failed to find dsi host
This is misleading, as there is no error and probe deferral is normal
behavior. Fix this by using dev_err_probe that will suppress
-EPROBE_DEFER errors. While at it, we touch all dev_err in the probe
path. This makes the code more concise and included the error code
everywhere to aid user in debugging.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de
adv7533 bridge tries to dynamically switch lanes based on the
mode by detaching and attaching the mipi dsi device.
This approach is incorrect because this method of dynamic switch of
detaching and attaching the mipi dsi device also results in removing
and adding the component which is not necessary.
This approach is also prone to deadlocks. So for example, on the
db410c whenever this path is executed with lockdep enabled,
this results in a deadlock due to below ordering of locks.
-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
lock_acquire+0x6c/0x90
drm_modeset_acquire_init+0xf4/0x150
drmm_mode_config_init+0x220/0x770
msm_drm_bind+0x13c/0x654
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x174
component_add+0x18/0x2c
dsi_dev_attach+0x24/0x30
dsi_host_attach+0x98/0x14c
devm_mipi_dsi_attach+0x38/0xb0
adv7533_attach_dsi+0x8c/0x110
adv7511_probe+0x5a0/0x930
i2c_device_probe+0x30c/0x350
really_probe.part.0+0x9c/0x2b0
__driver_probe_device+0x98/0x144
driver_probe_device+0xac/0x14c
__device_attach_driver+0xbc/0x124
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x90/0xd0
process_one_work+0x28c/0x6b0
worker_thread+0x240/0x444
kthread+0x110/0x114
ret_from_fork+0x10/0x20
-> #0 (component_mutex){+.+.}-{3:3}:
__lock_acquire+0x1280/0x20ac
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x6c/0x90
__mutex_lock+0x84/0x400
mutex_lock_nested+0x3c/0x70
component_del+0x34/0x170
dsi_dev_detach+0x24/0x30
dsi_host_detach+0x20/0x64
mipi_dsi_detach+0x2c/0x40
adv7533_mode_set+0x64/0x90
adv7511_bridge_mode_set+0x210/0x214
drm_bridge_chain_mode_set+0x5c/0x84
crtc_set_mode+0x18c/0x1dc
drm_atomic_helper_commit_modeset_disables+0x40/0x50
msm_atomic_commit_tail+0x1d0/0x6e0
commit_tail+0xa4/0x180
drm_atomic_helper_commit+0x178/0x3b0
drm_atomic_commit+0xa4/0xe0
drm_client_modeset_commit_atomic+0x228/0x284
drm_client_modeset_commit_locked+0x64/0x1d0
drm_client_modeset_commit+0x34/0x60
drm_fb_helper_lastclose+0x74/0xcc
drm_lastclose+0x3c/0x80
drm_release+0xfc/0x114
__fput+0x70/0x224
____fput+0x14/0x20
task_work_run+0x88/0x1a0
do_exit+0x350/0xa50
do_group_exit+0x38/0xa4
__wake_up_parent+0x0/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x30/0xc0
el0_svc+0x58/0x100
el0t_64_sync_handler+0x1b0/0x1bc
el0t_64_sync+0x18c/0x190
Due to above reasons, remove the dynamic lane switching
code from adv7533 bridge chip and filter out the modes
which would need different number of lanes as compared
to the initialization time using the mode_valid callback.
This can be potentially re-introduced by using the pre_enable()
callback but this needs to be evaluated first whether such an
approach will work so this will be done with a separate change.
changes since RFC:
- Fix commit text and add TODO comment
changes in v2:
- Fix checkpatch formatting errors
Fixes: 62b2f026cd ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com
core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU: simplified VBIF configuration
- cleanup CTL interfaces
- DSI: removed unused msm_display_dsc_config struct
- switch regulator calls to new API
- switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- Improve error and edge conditions handling
- Convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- Add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support
-----BEGIN PGP SIGNATURE-----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=u/MJ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:
Unable to handle kernel execution of user memory at virtual address 0000000000000000
Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
Call trace:
0x0
adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
cec_adap_unconfigure+0x44/0x90 [cec]
__cec_s_phys_addr.part.0+0x68/0x230 [cec]
__cec_s_phys_addr+0x40/0x50 [cec]
cec_unregister_adapter+0xb4/0x118 [cec]
adv7511_remove+0x60/0x90 [adv7511]
i2c_device_remove+0x34/0xe0
device_release_driver_internal+0x114/0x1f0
driver_detach+0x54/0xe0
bus_remove_driver+0x60/0xd8
driver_unregister+0x34/0x60
i2c_del_driver+0x2c/0x68
adv7511_exit+0x1c/0x67c [adv7511]
__arm64_sys_delete_module+0x154/0x288
invoke_syscall+0x48/0x100
el0_svc_common.constprop.0+0x48/0xe8
do_el0_svc+0x28/0x88
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x15c/0x160
Code: bad PC value
---[ end trace 0000000000000000 ]---
Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register
map - not the CEC register map. As such, we shouldn't apply an offset to
the register address. Doing so will cause us to address a bogus register
for chips with a CEC register map offset (e.g. ADV7533).
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-2-alvin@pqrs.dk
