[Why & How]
Remove unused filters and functions
Add static to limit scope
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow reuse of code by making dcn401_program_pipe()
non static.
Fixes: 2739bd1237 ("drm/amd/display: Allow reuse of of DCN4x code")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
currently dml2 is using a hard coded 16 to convert memclk to dram_speed_mts.
for apu, this depends on wck_ratio.
change to pass the already calculated dram_speed_mts from fpu to dml2.
v2: use existing calculation of dram_speed_mts for now to avoid regression
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There have been instances of some monitors being unable to link train on
their reported link speed using their selected FFE preset. If a different
FFE preset is found that has a higher rate of success during link training
this workaround can be used to force its FFE preset.
[How]
A new link workaround flag is made called force_dp_ffe_preset. The flag is
checked in override_training_settings and will set lt_settings->ffe_preset
which is null if the flag is not set. The flag is then set in
override_lane_settings.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Brendan Tam <Brendan.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Instead of converting tables from s1_10 to s1_12, add s1_12 tables instead.
Remove init calls that do the conversion. Add APIs to read s1_10 tables
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
causing some regression on dgpu which still needs the
pre-emptive return, limit this to reporter asic version
it is simple to include
different dcn versions from this point forward, each dcn
resource is initialized with the flag and can be enabled
at will
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
needed in certain scenarios for debugging and logging
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
LLS policy not affected by TF.
Remove check in don't care case and use
pixel format only.
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Instead of converting tables from s1_10 to s1_12,
added s1_12 tables instead in SPL
Remove init calls that do the conversion
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For various fixes to mcache_row_bytes calculation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting link DPMS off in response to HPD disconnect creates AUX
transactions on a link that is supposed to be disconnected. This can
cause issues in some cases when the sink re-asserts HPD and expects
source to re-enable the link.
[How]
Avoid AUX transactions on disconnected link.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MAX_SURFACES and MAX_PLANES now have docstrings that better show the difference between the two.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For enabling 4-plane MPO, we need dc to expose 4 planes for DCN35 and
beyond, as well as DCN21
[how]
Set dc_caps.max_slave_*planes to 3 for appropriate ASICs
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN36 support in dc_resource.c.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add case on clean_up_dsc_blocks() to support DCN36 as well.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DML2 for DCN36.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN36 support in GPIO.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add resource handling for DCN36.
V2: adjust copyright license text
V3: remove unnecessary headers
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IRQ services for DCN36.
This allows us to create/init and manage irqs for DCN3
V2: adjust copyright license text
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add case for DCN36 in command_table_helper2.c.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN3.6 asic identifiers.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DC_LOG_DEBUG instead of pr_info to match other uses in dc.c.
Fixes: 091e301c2b ("drm/amd/display: Add debug messages for dc_validate_boot_timing()")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_enc_cfg_get_link_enc_used_by_stream() is no longer used after
2021's:
commit 6366b00346 ("drm/amd/display: Maintain consistent mode of
operation during encoder assignment")
which introduces and uses the _current version instead.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_max_support_fbc_buffersize() is unused since 2021's
commit 94f0d0c80c ("drm/amd/display/dc/dce110/dce110_compressor: Remove
unused function 'dce110_get_required_compressed_surfacesize")
removed it's only caller.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hubbub1_toggle_watermark_change_req() last use was removed in 2017 by
commit b8fce2c9d7 ("drm/amd/display: Optimize programming front end")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_clock_requirements_for_state() was added in 2018 by
commit 8ab2180f96 ("drm/amd/display: Add function to fetch clock
requirements")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last user of dc_stream_get_crtc_position() was
mod_freesync_get_v_position() which is removed in a previous
patch in this series.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mpc1_is_mpcc_idle() was added in 2017 by
commit feb4a3cd8e ("drm/amd/display: Integrating MPC pseudocode")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Move SPL to a new path
- Request HW cursor on DCN3.2 with SubVP
- Allow reuse of of DCN4x code
- Enable odm 4:1 when debug key is set
- Fix seamless boot sequence
- Support multiple options during psr entry.
- Revert "Exit idle optimizations before attempt to access PHY"
- Fix out-of-bound accesses
- Fixes for mcache programming in DML21
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[HOW]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the static qualifier to make it available for code sharing
with other components.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
odm 4to1 is enabled when debug key is set.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Muhammad Ahmed <muhammad.ahmed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some panels may not handle idle pattern properly during PSR entry.
[HOW]
Add a condition to allow multiple options on power down
sequence during PSR1 entry.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Martin Tsai <Martin.Tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit de612738e9.
Reason to revert: screen flashes or gray screen appeared half of the
screen after resume from S4/S5.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
- Fixes on psr_version, dcn35 register address, DCPG OP control sequences
- Imporvements to CR AUX RD interval interpretation, dio link encoder
- Disable PSR-SU on some OLED panels
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We would like to have new dio encoder assigning flow.
Which should be aligned with hpo assigning and have
simple logic and data representation.
[HOW}
1. A new config option to enable/disable the new code.
2. Encoder-link mapping is in res_ctx and assigned encoder.
is accessed through pipe_ctx.
3. assign dio encoder when add stream to ctx
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In some situations, dc->res_pool may be null.
[HOW]
Check if pointer is null before dereference.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
IP_REQUEST_CNTL should only be toggled off when it was originally, never
unconditionally.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1) The current calculations for OTO prefetch bandwidth do not consider the number of DPP pipes in use.
As a result, OTO prefetch bandwidth may be larger than the vactive bandwidth if multiple DPP pipes are used.
OTO prefetch bandwidth should never exceed the vactive bandwidth.
2) Mode programming may be mismatched with mode support
In cases where mode support has chosen to use the equalized (equ) prefetch schedule,
mode programming may end up using oto prefetch schedule instead.
The bandwidth required to do the oto schedule may end up being higher than the equ schedule.
This can cause the required urgent bandwidth to exceed the available urgent bandwidth.
[How]
Output the oto prefetch bandwidth and incorperate it into the urgent bandwidth calculations
even if the prefetch schedule being used is not the oto schedule.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The double buffer cursor registers is updated by the cursor
vupdate event. There is a gap between vupdate and cursor data
fetch if cursor fetch data reletive to cursor position.
Cursor corruption will happen if we update the cursor surface
in this gap.
[How]
Modify the cursor request mode to the beginning prefetch always
and avoid wraparound calculation issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP spec updated to have the CR AUX RD interval match the EQ AUX RD
interval interpretation of DPCD 0000Eh/0220Eh for 8b/10b non-LTTPR mode
and LTTPR transparent mode cases.
[How]
Update interpretation of DPCD 0000Eh/0220Eh for CR AUX RD interval
during 8b/10b link training.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The initial setting for psr_version is not correct while
create a virtual link.
The default psr_version should be DC_PSR_VERSION_UNSUPPORTED.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mark_seamless_boot_stream() can be called multiple times to run
the more expensive checks in dc_validate_boot_timing().
Refactor the function so that if those have already passed once
the function isn't called again.
Also add a message the first time that they have passed to let
the user know the stream will be used for seamless boot.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250120194903.1048811-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_validate_boot_timing() runs through an exhaustive list of checks to
determine whether a boot stream can be marked as seamless. When the
checks fail, a user will be left guessing what the reason was
Add debug statements that will be helpful to validate the specific
reason.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250120194903.1048811-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Reverse the visual confirm recouts
- Exclude clkoffset and ips setting for dcn351 specific
- Fix cursor programming problems
- Increase block_sequence array size
- Use Nominal vBlank to determine vstartup if Provided
- Fix clock frequencies incorrect problems for dcn401
- Add SDP programming for UHBR link as well
- Support "Broadcast RGB" drm property
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When checking if a pipe can disable cursor to prevent duplicate cursors,
having visual confirm on will prevent disabling cursors on planes which
cover the bottom of the screen.
[HOW]
When checking if a plane can disable visual confirm, the pipe first
reverses these calculations before doing the checks.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Exclude clock offset and IPS setting for dcn351 specific only.
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible to generate more than 50 steps in hwss_build_fast_sequence,
for example with a 6-pipe asic where all pipes are in one MPC chain. This
overflows the block_sequence buffer and corrupts block_sequence_steps,
causing a crash.
[How]
Expand block_sequence to 100 items. A naive upper bound on the possible
number of steps for a 6-pipe asic, ignoring the potential for steps to be
mutually exclusive, is 91 with current code, therefore 100 is sufficient.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
vBlank used to determine the max vStartup is based on the smallest between
the vblank provided by the timing and vblank in ip_caps.
Extra vblank time is not considered if the vblank provided by the timing ends
up being higher than what's defined by the ip_caps
Use 1 less than the vblank size in case the timing is interlaced
so vstartup will always be less than vblank_nom.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Address was not previously populated which can result in incorrect
clock frequencies being read on boot.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add SDP programming for UHB link as well.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Knowing the destination of OTG's vertical interrupt 2 is useful for
debugging, but it is not currently included in the OTG state readback
logic
[How]
Read the OTG interrupt destination register to get the vertical interrupt
2 destination on ASICs that have this register when reading back the OTG
state from hardware
Reviewed-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The source device outputs a full RGB signal, but TV may
be set to use limited RGB. The mismatch in color
range leads to a degradation in image quality.
Display driver should have the ability to switch
between the full and limited RGB to match TV's settings.
[HOW]
Add support of the linux DRM "Broadcast RGB" property, which
indicates the Quantization Range (Full vs Limited) used.
User space can set this property to be "Automatic", "Full"
or "Limited 16:235" to adjust the output color range.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Yan Li <yan.li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a couple of statements with two following semicolons, replace
these with just one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the value pulled from the vbios just like newer chips.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fields are marked as reserved in atom_firmware_info_v3_1,
but thet contain valid data in all of the vbios images I've
looked at so add parse these fields as per
atom_firmware_info_v3_2. The offsets are the same and the
reset of the structure is the same.
v2: squash in NULL checks
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the i2c bus used by OEMs for board specific i2c features
like RGB.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit
a2b5a99562 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4),
but location can have size up to 6. As a result, it is necessary to
check location against MAX_HPO_DP2_ENCODERS.
Similiarly, disp_cfg_stream_location can be used as an array index which
should be 0..5, so the ASSERT's conditions should be less without equal.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
the offset address of mmCLK5_spll_field_8 was incorrect for dcn35
which causes SSC not to be enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-An Chen <lo-an.chen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
Updating the cursor enablement register can be a slow operation and accumulates
when high polling rate cursors cause frequent updates asynchronously to the
cursor position.
[how]
Since the cursor enable bit is cached there is no need to update the
enablement register if there is no change to it. This removes the
read-modify-write from the cursor position programming path in HUBP and
DPP, leaving only the register writes.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.
[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated. This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When compiling allmodconfig (CONFIG_WERROR=y) with clang-19, see the
following errors:
.../display/dc/dml2/display_mode_core.c:6268:13: warning: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Wframe-larger-than]
.../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: warning: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Wframe-larger-than]
Mark static functions called by dml_prefetch_check() and
dml_core_mode_support() noinline_for_stack to avoid them become huge
functions and thus exceed the frame size limit.
A way to reproduce:
$ git checkout next-20250107
$ mkdir build_dir
$ export PATH=/tmp/llvm-19.1.6-x86_64/bin:$PATH
$ make LLVM=1 O=build_dir allmodconfig
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
The way how it chose static functions to mark:
[0] Unset CONFIG_WERROR in build_dir/.config.
To get display_mode_core.o without errors.
[1] Get a function list called by dml_prefetch_check().
$ sed -n '6268,6711p' drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c \
| sed -n -r 's/.*\W(\w+)\(.*/\1/p' | sort -u >/tmp/syms
[2] Get the non-inline function list.
Objdump won't show the symbols if they are inline functions.
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
$ objdump -d build_dir/.../display_mode_core.o | \
./scripts/checkstack.pl x86_64 0 | \
grep -f /tmp/syms | cut -d' ' -f2- >/tmp/orig
[3] Get the full function list.
Append "-fno-inline" to `CFLAGS_.../display_mode_core.o` in
drivers/gpu/drm/amd/display/dc/dml2/Makefile.
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
$ objdump -d build_dir/.../display_mode_core.o | \
./scripts/checkstack.pl x86_64 0 | \
grep -f /tmp/syms | cut -d' ' -f2- >/tmp/noinline
[4] Get the inline function list.
If a symbol only in /tmp/noinline but not in /tmp/orig, it is a good
candidate to mark noinline.
$ diff /tmp/orig /tmp/noinline
Chosen functions and their stack sizes:
CalculateBandwidthAvailableForImmediateFlip [display_mode_core.o]:144
CalculateExtraLatency [display_mode_core.o]:176
CalculateTWait [display_mode_core.o]:64
CalculateVActiveBandwithSupport [display_mode_core.o]:112
set_calculate_prefetch_schedule_params [display_mode_core.o]:48
CheckGlobalPrefetchAdmissibility [dml2_core_dcn4_calcs.o]:544
calculate_bandwidth_available [dml2_core_dcn4_calcs.o]:320
calculate_vactive_det_fill_latency [dml2_core_dcn4_calcs.o]:272
CalculateDCFCLKDeepSleep [dml2_core_dcn4_calcs.o]:208
CalculateODMMode [dml2_core_dcn4_calcs.o]:208
CalculateOutputLink [dml2_core_dcn4_calcs.o]:176
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add some feature for secure display
- Add replay desync error count tracking and reset
- Update chip_cap defines and usage
- Remove unnecessary eDP power down
- Fix some stuttering/corruption issue on PSR panel
- Cleanup and refactoring DML2.1
Acked-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
this is to init to HW real DTBCLK.
and use real HW DTBCLK status to update internal logic state
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is
because the outbox interrupt mechanism can not handle HPD
immediately and require some improvement.
[HOW]
1. not enable link if hpd_pending is true.
2. abort pre-train if training failed and hpd_pending is true.
3. check if 2 lane supported when it is alt mode
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Revised Replay Full screen video Pseudo vblank control.
Reviewed-by: Allen Li <allen.li@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a new flag in replay_config to indicate the replay
low hz status.
Reviewed-by: Allen Li <allen.li@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The functions read_ono_state are no longer in use and have been identified
as redundant.
Removing them helps streamline the codebase and improve maintainability by
eliminating unnecessary code.
[How]
These unused functions were removed from Hwss module, ensuring that no
functionality is affected, and the code is simplified.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 284f141f5c ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5c ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
BIOS table will not always contain accurate UMC channel info when
harvesting is enabled, so get the correct info from SMU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Have the need to specify the CRC window on specific CRC engine.
dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always
resets CRC engine at first.
[How]
Add index parameter to dc_stream_configure_crc() for selecting the desired crc
engine. Additionally, add another parameter to specify whether to skip the
default reset of crc engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a few cleanup and refactoring tasks that need to be done
with the DML2.1 wrapper and DC interface to remove dependencies on
legacy structures and N-1 prototypes.
[How]
Implemented pipe_ctx->global_sync.
Implemented new functions to use pipe_ctx->hubp_regs and
pipe_ctx->global_sync:
- hubp_setup2
- hubp_setup_interdependent2
- Several other new functions for DCN 4.01 to support newer structures
Removed dml21_update_pipe_ctx_dchub_regs
Removed dml21_extract_legacy_watermark_set
Removed dml21_populate_pipe_ctx_dlg_param
Removed outdated dcn references in DML2.1 wrapper.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The defines have also been updated with prefix AMD_ and atomfirmware.h
has been temporarily updated with both sets of defines to allow the
transition.
This update is being made to standardize workaround chip_cap flags,
in order to support more workaround flags in the future.
[HOW]
Updated EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN define, the flag is now
an enum masked by EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK. All checks for
DP_FIXED_VS_EN are now performed by masking with EXT_CHIP_MASK and
checking for an exact match rather than the previous bitwise AND check.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On entering/exiting idle power, certain parameters would be
very useful to know for power profiling purposes.
[HOW]
This commit adds certain hard min clocks and pipe types
to log output on idle optimization enter/exit.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Underflow and flickering was occuring due to high scaling ratios
when resizing videos.
[how]
Limit the scaling ratios by increasing the max scaling factor
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 24909d9ec7 ("drm/amd/display: Overwriting dualDPP UBF values
before usage") added a new warning in dml2/display_mode_core.c when
building allmodconfig with clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:6268:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Werror,-Wframe-larger-than]
6268 | static void dml_prefetch_check(struct display_mode_lib_st *mode_lib)
| ^
Commit be4e350931 ("drm/amd/display: DML21 Reintegration For Various
Fixes") introduced one in dml2_core/dml2_core_dcn4_calcs.c with the same
configuration:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: error: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than]
7236 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
In the case of the first warning, the stack usage was already at the
limit at the parent change, so the offending change was rather
innocuous. In the case of the second warning, there was a rather
dramatic increase in stack usage compared to the parent:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7032:13: error: stack frame size (2696) exceeds limit (2048) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than]
7032 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
This is an unfortunate interaction between an issue with stack slot
reuse in LLVM that gets exacerbated by sanitization (which gets enabled
with all{mod,yes}config) and function calls using a much higher number
of parameters than is typical in the kernel, necessitating passing most
of these values on the stack.
While it is possible that there should be source code changes to address
these warnings, this code is difficult to modify for various reasons, as
has been noted in other changes that have occurred for similar reasons,
such as commit 6740ec97bc ("drm/amd/display: Increase frame warning
limit with KASAN or KCSAN in dml2").
Increase the frame larger than limit when compile testing with clang and
the sanitizers enabled to avoid this breakage in all{mod,yes}config, as
they are commonly used and valuable testing targets. While it is not the
best to hide this issue, it is not really relevant when compile testing,
as the sanitizers are commonly stressful on optimizations and they are
only truly useful at runtime, which COMPILE_TEST states will not occur
with the current build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412121748.chuX4sap-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 88c7c56d07c108ed4de319c8dba44aa4b8a38dd1.
SW and HW state are not always matching in some cases causing cursor to
be disabled.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Add Interface to Dump DSC Caps from dm
- Add DP required HBlank size calc to link interface
- Add 6bpc RGB case for dcn32 output bpp calculations
- Add VC for VESA Aux Backlight Control
- Add support for setting multiple CRC windows in dc
- Clean up SPL code and outdated interfaces in dcn401_clk_mgr
- Disable replay and psr while VRR is enabled
- Fix PSR-SU not support but still call the amdgpu_dm_psr_enable
- Implement Replay Low Hz Visual Confirm
- Extend dc_stream_get_crc to support 2nd crc engine
- Update power gating logic for DCN35 hw
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is no way to distinguish
the static backlight control type
being used and the VABC support
without the use of a debugger or
reading DPCD registers.
[HOW]
Add Visual Confirm support
for VESA Aux-based Backlight Control.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Use helper functions for checking formats
Apply cositing offset in rotation case
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2()
should check for granularity is non zero to avoid assert and
divide-by-zero error in dcn_bw_ functions.
[How]
Add check for granularity 0.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DCN32 calculation doesn't consider RGB 6bpc for the DP case.
This results in an invalid output bpp being calculated when DSC is not
enabled in the configuration, failing the mode validation.
[How]
Add special case to handle 6bpc RGB in the output bpp calculation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain small HBlank timings may not have a large enough HBlank to
support audio when low bpp DSC is enabled. HBlank expansion by the
source can solve this problem, but requires the branch/sink to support
HBlank reduction.
[How]
Update DPMS sequence to call DM to perform DPCD write to enable HBlank
reduction on the branch/sink. Add stub in dm_helpers to be implemented
later.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Updating the cursor enablement register can be a slow operation and accumulates
when high polling rate cursors cause frequent updates asynchronously to the
cursor position.
[how]
Since the cursor enable bit is cached there is no need to update the
enablement register if there is no change to it. This removes the
read-modify-write from the cursor position programming path in HUBP and
DPP, leaving only the register writes.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
init_adj offset is applied when cosited not interstitial
Adjust cositing offset in SPL
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To ensure DML validation receives the correct tiling information,
such as swizzle mode or array mode, based on the active GFX format
[How]
- For new GFX format passed swizzle_mode to DML.
- For legacy GFX format passed array_mode to DML.
- Dynamically determined the appropriate tiling info based on the
active GFX format.
[Description]
This commit ensures that the correct GFX tiling information is passed
to DML. Depending on the active GFX format, the appropriate tiling info
is passed to DML. This change accommodates the different GFX formats
supported by latest platforms, ensuring compatibility and proper
DML validation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The `dc_tiling_info` union previously did not have a field to
specify the active GFX format, assuming only one format would
be used per DCN version. from DCN4+, support for switching
between different GFX formats is introduced, requiring a way
to track which format is currently in use.
[HOW]
Updated the `dc_tiling_info` union to include a new field that
explicitly indicates the currently used GFX format.
This allows the system to determine the active GFX format
and take the correct programming path accordingly.
[Description]
The union `dc_tiling_info` has been updated to support multiple
GFX formats by adding a new field for identifying the active format.
This update ensures that the correct programming path is followed
based on the selected format. All references to `dc_tiling_info`
in the codebase have been updated to reflect the new structure.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
initialize the power state for dc use,
but dc_set_power_state it not called at D3.
It would cause can't recognize last power state
[how]
remove initialize the power state for dc use, it is not necessary.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We like to have pretrain for dpia link so that dp and dp tunneling
have aligned behavior. The Main difficult for dpia pretrain is that
encoder can not get corresponded dpia port when link detection
in current implementation.
[HOW]
1. create enable/disable dpia output functions for dcn35 encoder
and have dpia_id and other necessary info as inputs.
2. dcn35 dpia use the new functions to enable/disable output.
3. have a option to enable/disable the change.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Add new Visual confirm color for Replay Low Hz.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Dennis.Chan <Dennis.Chan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No common dsc params found between encoder and decoder is one
of the reason that could prevent dsc from properly enabled.
Dump the params to a specific timing to help locate possible
invalid dsc params in either encoder or decoder side.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MAX/MIN macros maybe defined already, hence add a guard around them to
prevent errors that complain about redefinition like:
drivers/gpu/drm/amd/amdgpu/../dal-dev/modules/hdcp/hdcp_ddc.c:31: error: "MIN" redefined [-Werror]
31 | #define MIN(a, b) ((a) < (b) ? (a) : (b))
|
In file included from ./include/linux/kernel.h:28,
from ./include/linux/cpumask.h:11,
from ./include/linux/smp.h:13,
from ./include/linux/lockdep.h:14,
from ./include/linux/spinlock.h:63,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:7,
from ./include/linux/slab.h:16,
from drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:37,
from drivers/gpu/drm/amd/amdgpu/../display/modules/inc/mod_hdcp.h:29,
from drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp.h:29,
from drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_ddc.c:29:
./include/linux/minmax.h:329: note: this is the location of the previous definition
329 | #define MIN(a,b) __cmp(min,a,b)
|
cc1: all warnings being treated as errors
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Comparisons were made between unsigned char and unsigned int.
[How]
Corrected by changing variable types.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Natanel Roizenman <Natanel.Roizenman@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Since now we can set multiple crc windows for secure display, add a new input
parameter for dc_stream_get_crc to indicate to fetch crc from which crc
engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Have to support multiple CRC windows setting to dmub. Add new dmub forward
functions for supporting/forwarding multiple crc windows setting to dmub.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DP HBlank expansion/reduction, the HBlank parameters of the original
EDID timing needs to be notified to the sink in order for the timing to
be reduced back to the original HBlank size.
[How]
Add parameter in dc_crtc_timing to track the increased HBlank.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some features, such as HBlank expansion/reduction, needs to know how
much HBlank is required to support basic audio.
[How]
Add interface to link to calculate required HBlank size for a given
link + timing combination to support basic audio (i.e. 2-channel 48KHz).
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPCD register RECEIVE_PORT0_CAP contains HBlank expansion/reduction
capabilities of a DP device. These capabilities are required to enable
HBlank expansion/reduction logic.
[How]
Read raw RECEIVE_PORT0_CAP register values and store parsed fields.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
- Remove legacy update clocks sequence
- FCLK P-State allow message is not required
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Driver disable will deallocate framebuffer to reset IPS state, this will cause IPS start with
INIT state to blindly power gate ONO region to break power sequence. All the gating blocks
should be powered up when releasing hw to ensure all the power optimizations are identical to pre-OS.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
No check for HUBP/DPP power gating when DSC instance is still running. Avoid HUBP/DPP to
power gate when corresponding DSC block is still running in the power gating calculation.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 2563391e57 ("drm/amd/display: DML2.1 resynchronization") blew
away the compiler warning fix from commit 2fde4fdddc
("drm/amd/display: Avoid -Wenum-float-conversion in
add_margin_and_round_to_dfs_grainularity()"), causing the warning to
reappear.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Apply the fix again to resolve the warning.
Re-apply again after commit be4e350931 ("drm/amd/display: DML21 Reintegration For Various Fixes")
This should be making its way back to the original DML trees this time. (Alex)
Fixes: be4e350931 ("drm/amd/display: DML21 Reintegration For Various Fixes")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3841
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the hw supports up to 4 surfaces, increase the maximum number of
surfaces to prevent the DC error when trying to use more than three
planes.
[drm:dc_state_add_plane [amdgpu]] *ERROR* Surface: can not attach plane_state 000000003e2cb82c! Maximum is: 3
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seamless boot skips MPC init for the active pipe, resulting in stale MPC
rate control state being retained. This will cause issues since other
logic assumes it is disabled (as DCN30 and newer does not need it).
[How]
Disable MPC rate control on ODM pipe update to cover the seamless boot
case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When sink type is TMDS, PHY programming does not block against pixel
clock greater than 600MHz.
[How]
Based on sink type, block greater than 600MHz phy programming.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent invalid HW programming, streams should be revalidated first
before committing to HW.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dropping the entirety of dml2_policy_build_synthetic_soc_states exposes
an issue for states that cannot be filled via bbox_overrides and rely on
the default parameters that may or may not be present depending on the
DM.
For amdgpu_dm this results in missing parameters for most of the struct
in higher states:
- sr_exit_time_us
- sr_enter_plus_exit_time_us
- sr_exit_z8_time_us
- sr_enter_plus_exit_z8_time_us
- urgent_latency_pixel_data_only_us
- urgent_latency_pixel_mixed_with_vm_data_us
- urgent_latency_vm_data_only_us
- dram_clock_change_latency_us
- fclk_change_latency_us
- usr_retraining_latency_us
- writeback_latency_us
- urgent_latency_adjustment_fabric_clock_component_us
- urgent_latency_adjustment_fabric_clock_reference_mhz
- dscclk_mhz
- phyclk_mhz
- phyclk_d18_mhz
- phyclk_d32_mhz
- use_ideal_dram_bw_strobe
[How]
Copy from the first state, applying a minimal policy to set max clocks
for SOC independent values.
Then copy the SOC dependent ones from the states modified by
bbox_overrides.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When effective bandwidth from the SoC is enough to perform SubVP
prefetchs, then DF throttling is not required.
[HOW]
Provide SMU the required clocks for which DF throttling is not required.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Older Asics were changed to target new DCN while still needing older
support causing brightness adjustments to fail.
[How]
Reverted the DCN targets on required DCNs
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the power state for dc use
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is one uninitialized variable in file
dc/hwss/dcn401/dcn401_hwseq.c, which trigger com compile warnings.
[HOW]
Initialize the unininitialized variable.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Signed-off-by: Meera Patel <meera.patel@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current driver interface does not allow for flexibility in coexistence
of multiple interface versions, so add support for checking minor
interface revisions and providing appropriate programming.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The FAMS2 stream and sub-state have been separated into
2 different commands. Update the cmd function to send
one command each for the stream and sub-state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a DC helper for panic updates.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
This adds clear_tiling callbacks to the mi structure that
will be used for drm panic support to clear the tiling on
a display. Mem input (mi) is used on DCE based display
IPs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
This adds clear_tiling callbacks to the hubp structure that
will be used for drm panic support to clear the tiling on
a display. hubp3 support from Jocelyn's original patch
and the rest from me.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
dcn_find_dcfclk_suits_all() last use was removed by 2018's
commit 4fd994c448 ("drm/amd/display: Start using the new pp_smu
interface")
Remove it, and the dcn_find_normalized_clock_vdd_Level helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhubbub_warmup is a field that was only read by the just removed
dc_stream_warmup_writeback() function.
Remove the field and it's initialisers.
It was only ever initialised to a single function value
(dcn30_mmhubbub_warmup) which is called explicitly elsewhere.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_stream_warmup_writeback() is unused since it was added in 2019 by
commit 6a652f6d12 ("drm/amd/display: Add warmup escape call support")
Remove it.
Note there is a dcn30 version that's called directly which is kept.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dwb3_set_host_read_rate_control() has been unused since it was added by
commit 8993dee0de ("drm/amd/display: Add DCN3 DWB")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable_surface_flip_reporting() has been unused since it was added by
commit 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They were named with the incorrect dcn version.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Fix some regressions related to IPS2 and PSR Panel Replay
* Bug fixes in DML
* DMCUB debug improvements
* Other refactors and improvements across multiple components
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The force_ffu_mode flag could be initialized at other place.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8488646966.
In some test environments causes reporting failures for S0i3/S4.
It shouldn't actually block entry provided there's no race with the
last state being updated, but currently suspecting there's an IPS2
check that's no longer being met.
Fixes: 8488646966 ("drm/amd/display: Don't allow IPS2 in D0 for RCG Dynamic")
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0f5ac8c8e2
Due to a replay regression.
Fixes: 0f5ac8c8e2 ("drm/amd/display: Revised for Replay Pseudo vblank control")
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMColor inaccurately updates color space, bias and scale
destructively in dc_plane_state. This can be resolved by
accurately populating the infos on dc_plane_info where then
translation to plane state can happen as a whole surface update sequence.
[How]
Remove dc_plane_state update in DMColor and update color space,
bias and scale on dc_plane_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using upscaling on certain gpus, some incorrect scaling
calculations would be made causing hangs.
[HOW]
This was fixed by using the resource_build_scaling_params function on these
gpus.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Right now in dml2 mode validation we are calculating UBF parameters for
prefetch calculation for single and dual DPP scenarios. Data structure
to store such values are just 1D arrays, the single DPP values are
overwritten by the dualDPP values, and we end up using dualDPP for
prefetch calculations twice (once in place of singleDPP support check
and again for dual).
This naturally leads to many problems, one of which validating a mode in
"singleDPP" (when we used dual DPP parameters) and sending the singleDPP
parameters to mode programming, if we cannot support then we observe the
corruption as described in the ticket.
[HOW]
UBF values need to have 2d arrays to store values specific to single and
dual DPP states to avoid single DPP values being overwritten. Other
parameters are recorded on a per state basis such as prefetch UBF values
but they are in the same loop used for calculation and at that point its
fine to overwrite them, its not the case for plain UBF values.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add check for invalid pixel format, remove unused pixel formats
and clean up some names
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Mismatch between mode support and mode programming occurs.
Mode support would calculate higher row vblank than mode programming.
As a result, mode programming fails and hardware isn't properly programmed.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For mst streams under same topology, stream->link->link_enc_hw_inst are the same and
hence can't distinguish the crc window setting.
[How]
Firstly adjust dc_stream_forward_crc_window to accept assignment of phy_id. Follow up
another patch to determine the phy_id at dm layer.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to avoid unnecessary asserts, one of which is hit in
dcn31_panel_construct when booting on a DCN32 asic that has an eDP
connector on a different DIG than A or B. The DIG-based mapping only
applies when edp0_on_dp1 is supported, therefore the check for valid
eng_id can be moved within the appropriate section of the if statement.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Expose DCN401 HUBP functions for use across other platforms.
[Description]
This change aims to make the DCN401 HUBP functions accessible for
enabling their use in future platform developments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
Stores DMUB support for enablement of Varibright over VABC in DCN32
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
v and h tap calculations slightly different
Use h tap calculation for both v and h tap
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move DP tunneling field DPCD reading after all other RX caps are read.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise <Cruise.Hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using a sw cursor and flip immediate, the plane that is flipping
immediately will do partial updates causing tearing.
When on certain displays, subvp is expected based on
timings but should be disabled in specific use cases that are not
accounted for.
[HOW]
This was fixed by improving the timings check by using the hw cursor
required flag to cover the unaccounted use cases.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The existing changes to the DPMS off flag should help reduce
accidental entry, but this change further restricts the entry condition.
[How]
Record last power state as sent to DMUB.
Don't send IPS2 allow if it's D0.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
driver got wrong clock table due to miss match dtm_table headers.
correct the dtn_clock table based on pmfw header.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
EASF only applies to luma. Previously both luma and chroma taps
were checked to determine whether to enable EASF.
[HOW]
Only check if luma taps are supported before determining whether
to enable EASF or not.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is
null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
dcn20_program_pipe(). Previously, commit 8e4ed3cf16 ("drm/amd/display:
Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
partially fixed the null pointer dereference issue. However, in
dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and
plane_state is accessed again through pipe_ctx. Multiple if statements
directly call attributes of plane_state, leading to potential null
pointer dereference issues. This patch adds necessary null checks to
ensure stability.
Fixes: 8e4ed3cf16 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DC core fixes
- DCN35 fix
- DCN4+ fixes
- DML2 fix
- New SPL features
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where an OTG is remapped from driving a regular HDMI
display to a DP/eDP display. There are also cases where DTBCLK needs to
be enabled for HPO, but DTBCLK DTO programming may be done while OTG is
still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may
change the pixel clock generator source for a mapped and running OTG and
cause it to hang.
Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is
already done in program_pixel_clk(). Additionally, make sure that
program_pixel_clk sets DTBCLK DTO as source for special HDMI cases.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SPL code forces taps to 1 when ratio is 1:1 and sharpness is off
But for chroma 1:1, need taps > 1 to handle cositing
[How]
Do not force chroma taps to 1 when ratio is 1:1 for YUV420
Remove 420_CHROMA_BYPASS mode for scaler
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Early return possible if context has no clk_mgr.
This will lead to an invalid power profile being returned
which looks identical to a profile with the lowest power level.
Add back logic that populated the power profile and overwrite
the value if needed.
Cc: stable@vger.kernel.org
Fixes: d016d0dd5a ("drm/amd/display: Update Interface to Check UCLK DPM")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add public API to obtain number of taps in SPL.
[How]
Isolate function to calculate recout, ratios and viewport before
calculating taps. Call function in both public taps API call and private
scaling call.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When C-State entry is requested, the rate limiter will be disabled
which can result in high contention in the DCHUB return path.
[HOW]
Enable the rate limiter during C-state requests to prevent contention.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states.
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are some pipe scaler validation failure when the pipe is phantom
and causes crash in DML validation. Since, scalar parameters are not
as important in phantom pipe and we require this plane to do successful
MCLK switches, the failure condition can be ignored.
[How]
Ignore scalar validation failure if the pipe validation is marked as
phantom pipe.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
No check on head pipe during the dml to dc hw mapping will allow illegal
pipe usage. This will result in a wrong pipe topology to cause mpcc tree
totally mess up then cause a display hang.
[How]
Avoid to use the pipe is head in all check and avoid ODM slice during
preferred pipe check.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since is_dsc_possible is already checked just above, there's no need to
check it again before filling out the DSC settings.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes a legacy debug_defaults_diags struct.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT displays Dmesg warnings which are likely false
[How]
Disabling p-state checks leading to this warning for DCN31 and DCN314
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Emily Nie <Emily.Nie@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Garbage will show due to dig is on. So blank stream needed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a flag to force MST blocked discovery for certain branch devices.
[How]
Added a flag to force MST blocked discovery in struct dc_panel_patch.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
String literals must be assigned to const char pointers.
[How]
By adding const keyword to fix compilation errors.
Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. HDMI does not have 6 bpc support. Having 6 bpc pass validation
does not comply with spec.
2. Validate 420 only for native HDMI, but not apply to pcon use
case.
3. Current mode validation log is not readable.
[how]
1. Cap 8 bpc for dp-hdmi converter.
2. Validate yuv420 for pcon use case as well,
if rgb/yuv444 8bpc cannot fit into pcon bw limitation of
the link from the converter to HDMI sink.
3. Add readable pixel_format and color_depth into debug log.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement the new backlight_level_params structure as part of the VBAC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Modified existing functions to include the new backlight_level_params
structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Move the wait for pending updates past prepare_bandwidth if the previous
update was not a full update to reduce the average time it takes to
complete a full update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An upstream bug report suggests that there are production dGPUs that are
older than DCN401 but still have a umc_info in VBIOS tables with the
same version as expected for a DCN401 product. Hence, reading this
tables should be guarded with a version check.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Adjust otg w/a disable condition to include HPO explicitly rather than
assuming it is implicitly used through DP2.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Applying a hw w/a only relevant to DIG FIFO causing corruption
using HPO, do not apply the w/a if on DP2/HPO
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode validation, there maybe modes that fail
max_downscale_src_width check and scaling_quality
taps are 0. This will cause an assert to trigger
in spl_set_filters_data() because taps are 0.
[How]
Move taps calculation for non-adaptive scaling mode
to separate function and call it
if max_downscale_src_width fails. This will
populate taps if scaling_quality taps are 0.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4f01a68751.
[why & how]
The offending commit caused a lighting issue for Samsung Odyssey G9
monitors when connecting via USB-C. The commit was intended to block certain UHBR rates.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously dscl_prog_data stored pointer to sharpness 1dlut table.
SPL had four pre-generated tables, one for each setup. This allowed
us to minimize number of times we had to recalculate table when
switching between setups.
However, with dual display, this becomes an issue because for a given
setup, we could have a different per app sharpness value than the
global sharpness value. So the pre-generated table will change
but both displays may point to the same table and one of them
will have the wrong sharpness setting.
[How]
Store the sharpness 1dlut table in dscl_prog_data. This ensures
that each display can have its own sharpness setting.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DSC may be power gated when coming out of S0i3, so avoid polling
DSC registers since it will fail anyways. Only read if it is known
that DSC is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Whether we really enter idle optimizations are decided within DC.
Printing into dmesg before calling the DC API gives an incorrect
indication that we are entering idle optimization in cases where its
disabled manually.
To fix this, remove the print in DM and add them in DC
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC background colours that use fractional components look different if
MPC OGAM is in use vs in bypass mode. The current red and orange colours
look very similar when OGAM is in bypass, so the colours need to change
to be consistently very easy to tell apart.
[How]
Use colours that only have 0 or MAX values in each component
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
The variable "ips_supported" is redundant and we can return from
dcn35_smu_get_ips_supported directly.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
misc0, temp and split_pipe are assigned but immediately re-assigned
to other values. The early assignments are useless and are removed.
Unused variables are removed as well.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If max_downscale_src_width check fails, we exit early from
spl_calculate_scaler_params but dscl_prog_data is not fully
populated. If viewport is left at 0, it can cause crash in dml.
[How]
Call spl_set_dscl_prog_data before we exit early from
spl_calculate_scaler_params to populate dscl_prog_data
Populate taps in spl_get_optimal_number_of_taps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Flickering observed while playing 8k HEVC-10 bit video in full screen
mode with black border. We didn't support this case for subvp.
Make change to the existing check to disable subvp for this corner case.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Header related changes for core
[How]
Refactoring if and endif statements to enable DC_LOGGER
Reviewed-by: Mounika Adhuri <mounika.adhuri@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts
commit 9dad21f910 ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Adds support for P-State stall timeout detection in DCHUBBUB.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
OLED power up sequence takes an extra 150ms via hardcoded delay,
but there is a strict requirement on DisplayOn resume time.
For customer panel, remove these delays to meet target until a
cleaner solution is can be put in place.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix dcn401 idle optimization problem
- Fix cursor corruption on dcn35
- Fix DP LL compliance failures
- Fix SubVP Phantom VBlank End calculation
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & How]
The original guard is wrongly to be set as for dcn30.
Changed it from 30 to 301.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current fullscreen check in SPL using dm_helpers is out-of-sync
with dc state. This causes an issue during minimal transition
where we pick an invalid intermediate state because the pre and
post fullscreen status are different.
[How]
Add sharpening_required flag to dc_stream_state. Use this flag to
indicate if we are in fullscreen or not. Propagate flag to SPL for
fullscreen status. Remove workaround in DML
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The phantom stream timing is copied from the main stream as most
parameters are identical, however some need to be recalculated.
Currently VBlank End is not recalculated and copied from the main
incorrectly.
[HOW]
Recalculate VBlank End for phantom stream timing.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reuse subvp enable check from DCN32 for IGT testing of Sub-Viewport
feature on DCN401
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Cursor corruption observed on USBC display with specific system setup with a
reboot. Cursor memory might still in the lightsleep state due to voltage
issue, we need program DISPCLK_R_GATE_DISABLE to avoid this issue only on
DCN35.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all dcn401 ip. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all dcn10 ip. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all DCExxx IP's. The check ensures
that the index is within the valid range of the link_enc_hpd_regs array
to prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for dcn20/dcn201 IP's. The check ensures
that the index is within the valid range of the link_enc_hpd_regs array
to prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dm_error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dynamic ODM when sharpness is enabled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The function core_link_read_dpcd returns status which is not used at
all, making them useless assignments.
[HOW]
Print error messages if core_link_read_dpcd does not return DC_OK.
This fixes 2 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to clean up unnecessary asserts, one of which is an assert in
resource_is_pipe_type that fires if a pipe has no stream and still has
pointers to other pipes ("dangling state"). This gets hit because pipes
are not properly cleaned up in reset_back_end_for_pipe. When resetting a
pipe, the existing MPCC / ODM combine pointers are no longer valid,
especially when we put ODM in bypass.
[How]
- reset pipe pointers in reset_back_end_for_pipe
- remove useless code to avoid confusion
(a long time ago it had a reason to be there, not anymore)
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pass in sharpening policy through plane state from control side
[How]
Add sharpener support through dc_caps.
Add sharpen policy to plane state and move to spl_input.
Pass sharpen policy from plane state to SPL.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Code for dcn401 to calculate available MALL size for display was shared
with dcn32 and did not provide the correct result for all ASICs.
[HOW]
Add dcn401 specific function to properly calculate the available MALL
for display.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To get sink emission rate information for future
supported refresh rate calculation.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Print error messages when programming shaper lut or 3dlut fails.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A race condition occurs between cursor movement and vertical interrupt control
thread from OS, with both threads trying to exit IPS2.
Vertical interrupt control thread clears the prev driver allow signal while not fully
finishing the IPS2 exit process.
[How]
We want to detect all the allow signals have been cleared before we perform the full exit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Previous change for Coverity has caused regression on visual confirm
so fix it by reverting the part that affects visual confirm.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a known HW bug that causes the internal 3DLUT fetch signal to
be lost at VREADY, regardless of whether the OTG lock is being held or
not. A workaround is necessary to make sure that this internal signal
stays up after OTG unlock.
[How]
Set the 3DLUT_ENABLE bit immediately before and after the unlock. Also
use VUPDATE_KEEPOUT to prevent lock transition in the region between
VSTARTUP and VREADY, which could cause issues with this WA sequence.
Also including misc. 3DLUT DMA-related sequence fixes to address a few
regressions causing corruption.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
"split_pipe" are assigned to test_pipe and then immediately are updated
to other values. The same also applies to "status" as well.
Similarly, "id", "dwb" and "unused_dpps" are assigned but the functions
immediately return, and thus they have no effects.
As a results, the assignments removed.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dpcd_get_tunneling_device_data calls core_link_read_dpcd which can
fail. The status from core_link_read_dpcd should be checked and error
messages is printed in case of failures.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for dcn3x IP's. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
- Improvements to seemless boot.
- Adjustments for DSC dock.
- DML improvements
- DMCUB fixes for D0/D3 and new register offset.
- Code cleanup.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Initialize the new backlight_level_params structure as part of the ABC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Created initial framework of the backlight_level_params struct and
modified existing functions to include the new structure.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Uninitialized variables could cause some bits to be set, thus enabling
features unintentionally.
[How]
Initialize replay_config variable to avoid future issues.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
log2_blk_height and log2_blk_width are assigned to 0 and then
immediately are updated to other values. The assignments to zero are
redudant and removed.
This fixes 18 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
TimeForFetchingMetaPTE, TimeForFetchingRowInVBlank and
LinesToRequestPrefetchPixelData are local variables. They
are freed when CalculatePrefetchSchedule() ends and need
not clearing explicitly.
This fixes 21 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Videos using YUV420 format may result in high power being used.
Disabling MPO may result in lower power usage.
Update interface that can be used to check power profile of a dc_state.
[How]
Add helper functions that can be used to determine power level:
- get power profile after a dc_state has undergone full validation
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assigning link encoder is not relevant to validating bandwidth so move
the logic outside of dc_global_validate.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Playing 1080p video on 4k60 timing uses UCLK DPM5 and mode support
determines that p-state switching is not supported.
[How]
Allow DML to increase latency as the last strategy so strategies such
as VBlank p-state switching may become possible
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Viewport size excess surface size observed sometime with some timings or
resizing the MPO video window to cause MPO unsupported. Calculate final
viewport size first with a 100x100 dummy viewport to get the max TAP
support and then re-run final viewport calculation if TAP value changed.
Removed obsolete preliminary viewport calculation for TAP validation.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Since the surface/stream update flags aren't cleared after applying
updates, those same updates may be applied again in a future call to
update surfaces/streams for surfaces/streams that aren't actually part
of that update (i.e. applying an update for one surface/stream can
trigger unintended programming on a different surface/stream).
For example, when an update results in a call to
program_front_end_for_ctx, that function may call program_pipe on all
pipes. If there are surface update flags that were never cleared on the
surface some pipe is attached to, then the same update will be
programmed again.
[How]
Clear the surface and stream update flags after applying the updates.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616
Cc: Melissa Wen <mwen@igalia.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is based on real asic performance result.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Programming outstanding updates is causing hangs on dcn35, so remove
for now.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Regamma resolution for the first few black levels can have problems for
calibration.
[HOW]
HW LUT is divided into N power-of-2 regions each with K segments. For
SDR mode we set min point at 2^-10 and increments of 2^-13. It's
generally more than 8-bit SDR needs, but some calibration tools and API
use 12-bit curves.
The fix shifts starting point to 2^-12 and starting increments at 2^-16.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Missing a dc_dmub_srv_notify_fw_dc_power_state in driver init.
[How]
Notify DMCUB of D0 state in hardware_init.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some EDP to MIPI panel, disabling OTG when link is alive like boot
case, the converter might output garbage or show no display because our
GPU is not sending required pixel data.
Alos Dig fifo underflow was found which might cause garbage, when
resetting otg for other types of EDP panels.
[How]
Skipping resetting OTG if the dig fifo is on. Make sure that the otg for
the pipe is the one that the dig fifo is selecting via the FE mask.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
TBT4 dock have bandwidth limitation, need dsc always on to support all
modes.
[how]
force dsc always on when detect TBT4 dock.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b8d046985c.
Reverting as regression discovered on certain systems and golden values
need to updated.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The MPO plane will receive a flip but
desktop plane may not receive a flip when GSL is enabled.
As a result, system will be stuck waiting for a flip that was never sent.
[How]
Set update address update flag of all flip_immediate planes
if there are multiple planes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Resync FIFO is a workaround to write the same value to
DENTIST_DISPCLK_CNTL register after programming OTG_PIXEL_RATE_DIV
register, in case seemless boot, there is no OTG_PIXEL_RATE_DIV register
update, so skip CRTC disable when resync FIFO to avoid random FIFO error
and garbage.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn32_blank_phantom() does not consider the subVP+ODM case when blanking.
Only one of the pipes will get blanked. Remaining pipes are not blanked.
Will cause underflow in the phantom pipe when enabling the CRTC.
[How]
Use blank_pixel_data() instead of blank_phantom().
remove dcn32_blank_phantom() since logic is identical.
Different DPG dimensions get programmed when blanking phantom pipes.
Previously had phantom pipes use DPG dimensions of the main stream.
Now use DPG dimensions of the phantom streams
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC 3.2.303 contains some improvements as summarized below:
* Improve brightness control
* Add support for UHBR10 eDP
* OPTC required only for DTBCLK_P for dcn401
* Fix TBT monitor resume issue
* Code cleanup
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO
stream encoder clock. Programming the required clock when
enabling/disabling both components can cause issues.
For example, if HPO is being disabled and clock source is changed to
REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC.
[HOW]
Only program the DTBCLK_P when programming CRTC, as its expected it will
be enabled prior to HPO, and disabled after HPO in all valid cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables starting and stopping IPS residency measurements
and querying the IPS residency information consisting of residency
percent, entry counter, total time active & inactive, and histograms
for the specified IPS mode.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
MacroTileSizeBytes is set to either 256 or 65535 and it is never
4096. Its branch is not taken, and should be removed. Similarly,
mode_422 is always 0 and thus ppe will always be 1. The ternary
operator should be removed.
This fixes 2 DEADCODE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the existing brightness control functions to use the new
ABC Framework and prioritize Aux-based brightness control.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Muyuan Yang <muyuan.yang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prioritize Aux-based over PWM-based brightness control
for more types of panels and introduce a new structure
to store and manage the type of brightness control used.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Muyuan Yang <muyuan.yang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
The current UHBR10 eDP panel has new security feature update. Add support for the new FW
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Liu Xi (Alex) <xi.liu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If two monitors with TMDS signals were timing synced and one was
disconnected, the stream would go out of sync too early due to
the PLL turning off and the system could hang
[How]
On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF
to TX_EN-to-PLL_ON for TMDS
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current state should be used when waiting for DET update
instead of new context.
For any streams decreasing in DET, pipes used in the current state
should be checked since those pipes need to free their DET before
DET can be reallocated.
[How]
Pass in current_state instead of context.
Use pipe from current_state instead of context. This assumes that
pipe in the current_state is an OTG_MASTER pipe if the pipe in the context is an OTG_MASTER pipe.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE. This
quirk works around it by skipping VSC that is incompatible with eDP
panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In cases where an MPO plane is being dragged around partially off-screen,
it is possible to get a flip where the only scaling parameters to change
are the clip rect size and position. Currently, clip rect size changes
are considered medium updates, which can result in the clip rect being used
for HW programming being larger than the clip rect that was used for the
last DML validation. This can lead to mismatches in different parts of the
pipe and can result in a p-state hang.
[How]
- consider clip rect size changes scaling changes, therefore full updates
- refactor get_scaling_info_update_type for clarity
- remove clip_size_change update flag
Clip rect size changes were previously demoted from full updates as an
optimization when the MPO + ODM policy changed to always pre-allocate MPO
pipes, but it created the issue described above. Personally testing this
use case, the performance feels fine with full update spam, and we expect
this is a fairly infrequent use case. If the performance needs to be
optimized in the future, consider reworking the entire update type logic
to run a DML pass and determine the update type based on what DML says
will actually change.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Certain transitions from HW to SW cursor can be missed, which will
result in black visual confirm instead of expected blue/red. Need to add
handling for cursor visual confirm to dc_update_visual_confirm_color.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Videos using YUV420 format may result in high power being used.
Disabling MPO may result in lower power usage.
Update interface that can be used to check power profile of a dc_state.
[How]
Allow pstate switching in VBlank as last entry in strategy candidates.
Add helper functions that can be used to determine power level:
-get power profile after a dc_state has undergone full validation
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The "dpp35_dppclk_control" routine is incorrectly disabling the register clock gater
when the DPP is enabled.
The "DISPCLK_R_GATE_DISABLE" should never be set to 1 in the normal operating mode.
This will disable the clock gater and the DPPCLK register clock branch will always be running.
As a consequence, the dynamic power will be higher than expected.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
set dispclk to 0 cause stability issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently the absence of UHBR cable ID caps from USB-C PD does not block UHBR
rates. In situations where DPCD reports valid UHBR capability but USB-C PD
does not, such as using a USB-C to DP1.4 dongle connected to a native DP2.1
cable, link loss and lightup failures can be seen as a result.
Additionally, in edge cases where a platform supports cable ID but DMUB
doesn't correctly return cable ID caps, driver currently also allows UHBR.
[HOW]
Block UHBR rates over DP alt mode if cable id indicates no UHBR support.
Additionally, block UHBR rates if a cable ID supported platform receives no
reply from a DMUB cable id query.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current pipe unlock order set within dcn401_interdependent_update_lock.
Separate the logic from the functionality to allow for unit testing
and make it easier to debug.
[How]
Add a flag to indicate if a pipe unlock order should be set.
Create function to determine unlock order.
Indicate which pipes should be unlocked first using
array stored in dc scratch memory.
Pipes indicated in array can be unlocked in any order.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
cm2_params is used to set update_flags.
It's value is not intended to be modified.
[WHAT]
Change the declaration of cm2_params to be a constant variable
Reviewed-by: Tao Huang <tao.huang@amd.com>
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Signed-off-by: Shunlu Zhang <Shunlu.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Triple buffer enablement currently does not work properly
[HOW]
Allow triple buffer enablement to happen properly on
fast updates
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <sunglee@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Turning off OTG before DIG is on and backlight is on, might cause:
DIG FIFO underflow.
EDP output unexpected video data. That might violate EDP spec.
EDP spec requires black light should be off before validate
video data is turned off.
Currently garbage issue only occurs in one type of EDP to MIPI converter.
[How]
Add monitor patch to call blank_stream() before disable_crtc().
That will be no impact for current sequence.
If there are more types of EDP panels meeting this issue later,
we might remove this monitor patch and fix the current sequence.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When integer scaling is enabled, set taps to 1 and disable adaptive
scaler and sharpener.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8d20a066fa.
It's causing a failure in the abm_gradual igt test.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't actually need to request that the compositor does a full
modeset to modify the panel power savings level, we can instead
just make a request to DMUB, to set the new level dynamically.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3578
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix several copypaste mistakes in *_disable_link_output() functions where
an improper function pointer is checked before dereference.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch addresses warnings produced by the checkpatch script
related to unnecessary casts that could potentially hide bugs.
The specific warnings are as follows:
- Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:16
- Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:20
- Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:30
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bios_get_vga_enabled_displays has been unused since
commit 5a8132b9f6 ("drm/amd/display: remove dead dc vbios code")
Remove it.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the parameter descriptor for the function
`dc_process_dmub_dpia_set_tps_notification` to match the actual
parameters used.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5768: warning: Function parameter or struct member 'tps' not described in 'dc_process_dmub_dpia_set_tps_notification'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5768: warning: Excess function parameter 'ts' description in 'dc_process_dmub_dpia_set_tps_notification'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As set_drr() is called from IRQ context, it can happen that the
pipe context has been nulled by dc_state_destruct().
Apply the same protection here that is already present for
dcn35_set_drr() and dcn10_set_drr(). I.e. fetch the tg pointer
first (to avoid a race with dc_state_destruct()), and then
check the local copy before using it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Clear cached watermark after resume
- Update IPS default mode for DCN35/DCN351
- Use full update for swizzle mode change
- Skip to enable dsc if it has been off
- Fix underflow when setting underscan on DCN401
- Remove always-false branches
- Check null pointer before dereferencing se
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver could skip program watermarks when resume from S0i3/S4.
[HOW]
Clear the cached one first to make sure new value gets applied.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
1) We did linear/non linear transition properly long ago
2) We used that path to handle SystemDisplayEnable
3) We fixed a SystemDisplayEnable inability to fallback to passive by
impacting the transition flow generically
4) AFMF later relied on the generic transition behavior
Separating the two flows to make (3) non-generic is the best immediate
coarse of action.
DC can discern SSAMPO3 very easily from SDE.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It makes DSC enable when we commit the stream which need
keep power off, and then it will skip to disable DSC if
pipe reset at this situation as power has been off. It may
cause the DSC unexpected enable on the pipe with the
next new stream which doesn't support DSC.
[HOW]
Check the DSC used on current pipe status when update stream.
Skip to enable if it has been off. The operation enable
DSC should happen when set power on.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
When underscan is set through xrandr, it causes the stream destination
rect to change in a way it becomes complicated to handle the calculations
for subvp. Since this is a corner case, disable subvp when underscan is
set.
Fix the existing check that is supposed to catch this corner case by
adding a check based on the parameters in the stream
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
req128_c is always set to false and its branch is never taken.
Similarly, MacroTileSizeBytes is set to either 256 or 65535 and it is
never 4096 and it's branch is not taken.
Therefore, their branches are removed.
This fixes 3 DEADCODE issues reported by Coverity.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY && HOW]
For some HDMI OVT timing, YCbCr422 encoding fails at the DSC
bandwidth check. The root cause is our DSC policy for timing
doesn't account for HDMI YCbCr422 native support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Disable sharpening if not in fullscreen if this policy is selected
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We intend to consolidate dp tunneling and conventional dp link training.
[HOW]
1. Use the same link training entry for both dp and dpia
2. Move SET_CONFIG of non-transparent mode to dmub side
3. Add set_tps_notification dmub_cmd to notify tps request for
non-transparent dpia link training
4. Check dpcd request result and abort link training early if dpia
aux tunneling fails
5. Add option to avoid affect old product
6. Separately handle wait_time_microsec for dpia
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
On display on sequence, enabling SYMCLK32_LE root clock gating
causes issue in link training so disabling it is needed.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DSC on eDP could be enabled during VBIOS post. The enabled
DSC may not be disabled when enter to OS, once the system was
in second screen only mode before entering to S4. In this
case, OS will not send setTimings to reset eDP path again.
The enabled DSC HW will make a new stream without DSC cannot
output normally if it reused this pipe with enabled DSC.
[HOW]
In accelerated mode, to clean up DSC blocks if eDP is on link
but not active when we are not in fast boot and seamless boot.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hangs with Z8 can occur if running an older unfixed PMFW version.
[HOW]
Fallback to RCG only for dynamic IPS2 states if it's not newer than
93.12. Limit to DCN35.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add options to change sharpen policy based on surface format
and scaling ratios.
[HOW]
Add sharpen_policy to change policy based on surface format
and scale_to_sharpness_policy based on scaling ratios.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the output format is different for HDMI TMDS signals, they are not
synchronizable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Corrupted screen will be observed when 4k144 DP/HDMI display and
4k144 eDP are connected, changing eDP refresh rate from 60Hz to 144Hz.
[HOW]
override_det_buffer_size_kbytes should be true for DCN35/DCN351.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver reports 0 display when the virtual display is still present, and
causes P-state hang in FW.
[HOW]
When enumerating through streams, check for active planes and use that
to indicate number of displays.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are some monitor timings that seem to be supported without
DSC but actually require DSC to be displayed. A VESA SCR introduced
a new max uncompressed pixel rate cap register that we can use to
handle these edge cases.
[HOW]
SST: Read caps from link and invalidate timings that exceed the
max limit but do not support DSC. Then check for options override
when determining BPP.
MST: Read caps from virtual DPCD peer device or daisy chained SST
monitor and set validation set BPPs to max if pixel rate exceeds
uncompressed limit. Validation set optimization continues as normal.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain profiles have higher HDR multiplier than SDR white level max
which is not currently supported.
[HOW]
Use SDR white level when calculating matrix coefficients for HDR RGB MPO
path instead of HDR multiplier.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'maxium' with 'maximum' in the comment &
replace 'diffculty' with 'difficulty' in the comment &
replace 'suppluy' with 'supply' in the comment &
replace 'Congiuration' with 'Configuration' in the comment &
replace 'eanbled' with 'enabled' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a descriptor for the 'program_isharp_1dlut' parameter, which is a
flag used to determine whether to program the isharp 1D LUT.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:963: warning: Function parameter or struct member 'program_isharp_1dlut' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.
[How]
Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a missing kdoc for the 'bs_coeffs_updated'
parameter in the 'dpp401_dscl_program_isharp' function. The
'bs_coeffs_updated' is a flag indicating whether the Blur and Scale
Coefficients have been updated.
The 'dpp401_dscl_program_isharp' function is responsible for programming
the isharp, which includes setting the isharp filter, noise gain, and
blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to
true, the function updates the blur and scale coefficients.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMO assumes that like timings can be synchronized, but DC only allows
this if the signal types match.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what]
Graphics hang observed with 3 displays connected to DP2.0 mst dock.
[why]
There's a mismatch in dml and dc between the assignments of hpo link
encoders.
[how]
Add a new array in dml that tracks the current mapping of HPO stream
encoders to HPO link encoders in dc.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add interface for controlling shapness level input into DCN.
- Update SPL to support custom sharpness values.
- Add support for different sharpness values depending on YUV/RGB
content.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f0b7dcf258.
It is causing graphics hangs.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain profiles have higher HDR multiplier than SDR boost max which
is not currently supported
[How]
Disable sharpness for these profiles
Fixes: 1b0ce903fe ("drm/amd/display: add improvements for text display and HDR DWM and MPO")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To provide option to dpia control power management
[How]
By adding disable_usb4_pm_support bit field in dpia_debug option to
control dpia power management
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous disable ODM policy due to underflow issue with sharpener.
Issue is resolved after updating sharpening policy to apply to
both windowed and fullscreen video
[How]
Remove sharpness check disabling Dynamic ODM policy
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some asserts are always hit on startup/Pnp when they should only be used
to indicate when something has gone wrong.
[How]
Ignore result of getting function from bios cmd table for newer asics.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting min dispclk to 50Mhz outside clock lowering function causes
unnecessary calls to SMU to lower dispclk and causes dentist hangs when
there is no stream on the pipes.
[How]
Move the set minimum dispclk logic inside the lowering dispclk if
statement.
Fixes: 2344413205 ("DCN35 set min dispclk to 50Mhz")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary TODO from spl_os_types.h
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use appropriate SPDX copyright for spl_os_types.h
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
- Fix MS/MP mismatches in dml21 for dcn401
- Resolved Coverity issues
- Add back quality EASF and ISHARP and dc dependency changes
- Add sharpness support for windowed YUV420 video
- Add improvements for text display and HDR DWM and MPO
- Fix Synaptics Cascaded Panamera DSC Determination
- Allocate DCN35 clock table transfer buffers in GART
- Add Replay Low Refresh Rate parameters in dc type
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous only applied sharpness for fullscreen YUV420 video.
[How]
Remove fullscrene restriction and apply sharpness for windowed
YUV420 video as well.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tune settings for improved text display.
Handle differences between DWM and MPO in HDR path.
[How]
Update sharpener LBA table.
Use HDR multiplier to calculate scalar matrix coefficients
for HDR RGB MPO path.
Update unit tests.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
To supported Low Refresh Rate panel for Replay Feature,
Adding some parameters to record Low Refresh Rate information.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Addressed previous issues with quality changes and new issues due to
rolling back quality changes.
[How]
This reverts commit f9e6759888, fixes merge conflicts, and fixed some
formatting errors.
Store current sharpness level for each pregen table to minimize
calculating sharpness table every time.
Disable dynamic ODM when sharpness is enabled.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to avoid arming the HPD timer in firmware when preparing for
S0i3 entry when DC is considered in D3.
[How]
Notify DMCUB of the power state transitions so it can decide to arm
the HPD timer for idle in DCN35 only in D0.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because sometime DMUB GPINT will time out,
it will cause we return 0 as residency number.
[How]
Retry to avoid this happened.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Request from PMFW to use GART for clock table transfer tables as
framebuffer is being deprecated on APU.
[How]
Switch over to GART via the allocation flag.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Remove coverity issues that were originally ignored.
[HOW]
Ran coverity locally on driver, used output report to find existing
coverity issues, resolved them
Reviewed-by: Nicholas Choi <nicholas.choi@amd.com>
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
