[WHY]
For non-zero DSC instances it's possible that the HUBP domain required
to drive it for sequential ONO ASICs isn't met, potentially causing
the logic to the tile to enter an undefined state leading to a system
hang.
[HOW]
Add more checks to ensure that the HUBP domain matching the DSC instance
is appropriately powered.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da63df0711)
Cc: stable@vger.kernel.org
[Why & How]
The original code only supports the tunneling for embedded one.
To support external tunneling feature, it needs to check
Tunneling_Support bit register.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DPP CLK enable needs to disable DPPCLK RCG first.
The DPPCLK_en in dccg should always be enabled when the corresponding
pipe is enabled.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
It is possible for an update to acquire otg lock and begin programming
while the previous update has not completed and its values have not
latched. The correct way to go about this is to wait until the vupdate
pulses so we can be sure that previous updates have latched and we can
continue with the current update pipe programming, otherwise during
consecutive full updates we will have corruption flash on the screen.
The corruption flash occurs specifically on configs that require odm
combine, and its local to a specific pipe (will not flash across whole
screen). This ticket is across the otg slave, but it may also appear
across master.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Vtotal is not applied to HW when handling vsync interrupt.
Make sure vtotal is aligned before enable replay.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Danny Wang <danny.wang@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the DCC and Tiling reset callback to all DCN versions that can
call it.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.
[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated. This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are a few cleanup and refactoring tasks that need to be done
with the DML2.1 wrapper and DC interface to remove dependencies on
legacy structures and N-1 prototypes.
[How]
Implemented pipe_ctx->global_sync.
Implemented new functions to use pipe_ctx->hubp_regs and
pipe_ctx->global_sync:
- hubp_setup2
- hubp_setup_interdependent2
- Several other new functions for DCN 4.01 to support newer structures
Removed dml21_update_pipe_ctx_dchub_regs
Removed dml21_extract_legacy_watermark_set
Removed dml21_populate_pipe_ctx_dlg_param
Removed outdated dcn references in DML2.1 wrapper.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Driver disable will deallocate framebuffer to reset IPS state, this will cause IPS start with
INIT state to blindly power gate ONO region to break power sequence. All the gating blocks
should be powered up when releasing hw to ensure all the power optimizations are identical to pre-OS.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
No check for HUBP/DPP power gating when DSC instance is still running. Avoid HUBP/DPP to
power gate when corresponding DSC block is still running in the power gating calculation.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seamless boot skips MPC init for the active pipe, resulting in stale MPC
rate control state being retained. This will cause issues since other
logic assumes it is disabled (as DCN30 and newer does not need it).
[How]
Disable MPC rate control on ODM pipe update to cover the seamless boot
case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhubbub_warmup is a field that was only read by the just removed
dc_stream_warmup_writeback() function.
Remove the field and it's initialisers.
It was only ever initialised to a single function value
(dcn30_mmhubbub_warmup) which is called explicitly elsewhere.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement the new backlight_level_params structure as part of the VBAC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Modified existing functions to include the new backlight_level_params
structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DSC may be power gated when coming out of S0i3, so avoid polling
DSC registers since it will fail anyways. Only read if it is known
that DSC is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Programming outstanding updates is causing hangs on dcn35, so remove
for now.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It makes DSC enable when we commit the stream which need
keep power off, and then it will skip to disable DSC if
pipe reset at this situation as power has been off. It may
cause the DSC unexpected enable on the pipe with the
next new stream which doesn't support DSC.
[HOW]
Check the DSC used on current pipe status when update stream.
Skip to enable if it has been off. The operation enable
DSC should happen when set power on.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing redundant condition.
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In certain scenarios DC can internally trigger back to back full updates
which will miss some required programming that is normally deferred
until post update via optimize_bandwidth.
[HOW]
In back to back update scenarios, wait for pending updates to complete
and perform any strictly required outstanding programming.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark
structures and functions") introduced a code refactor for DCHUB, but
during the merge process into amd-staging-drm-next, the program det
segments were removed. This commit adds the DET segment programming for
DCN35.
Fixes: 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark structures and functions")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some interface functions are defined in both the public and private HWSS
interfaces, which can lead to confusion and runtime issues, therefore
the duplicates should be eliminated.
[How]
- power_down should only be private, because it's only used within HWSS.
- update_plane_addr should only be public, as it's used outside HWSS.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We calculate static screen wait frames based
on the current timing info in the active stream.
If stream is not initialized, then we should skip
the calculation and go with the default values.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Poniters, such as dc->clk_mgr, are null checked previously in the same
function, so Coverity warns "implies that "dc->clk_mgr" might be null".
As a result, these pointers need to be checked when used again.
This fixes 10 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks for res_pool->dccg are redundant as it was already
dereferenced previously, as reported by Coverity; therefore the
null checks are removed.
This fixes 6 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Empty SST TUs are illegal to transmit over a USB4 DP tunnel.
Current policy is to configure stream encoder to pack 2 pixels per pclk
even when ODM combine is not in use, allowing seamless dynamic ODM
reconfiguration. However, in extreme edge cases where average pixel
count per TU is less than 2, this can lead to unexpected empty TU
generation during compliance testing. For example, VIC 1 with a 1xHBR3
link configuration will average 1.98 pix/TU.
[HOW]
Calculate average pixel count per TU, and block 2 pixels per clock if
endpoint is a DPIA tunnel and pixel clock is low enough that we will
never require 2:1 ODM combine.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adds support for performing the sequential ONO changes from DCN351
into DCN35 ASIC based on revision.
[How]
Check the revision and run the DCN351 sequences on applicable revisions.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Missing check for when there is new pipe configuration but both cur_pipe
and new_pipe are both populated causing update_state of DSC for that
instance not being updated correctly.
This causes some display mode changes to cause underflow since DSCCLK
is still gated when the display requires DSC.
[How]
Added another condition in the new pipe addition branch that checks if
there is a new pipe configuration and if it is not the same as cur_pipe.
cur_pipe does not necessarily have to be NULL to go in this branch.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c49e44ede5.
This causes regression on DP link layer test.
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Enable root clock optimization for SYMCLK and only
disable it when it's actively used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Input mode for the DIG FIFO should be programmed as part of stream
encoder setup.
[HOW]
Pre-calculate the pixels per cycle as part of the pixel clock params,
and program as part of stream encoder setup.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4d4d3ff16d ("drm/amd/display: Keep VBios pixel rate div
setting util next mode set") which causes issue.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for PHYSYMCLK and only
disable it when it's actively being used
v2: Fix array-index-out-of-bounds in dcn35_calc_blocks_to_gate
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO error can occur if we don't trigger a DISPCLK change after
touching K1/K2 dividers. For 4k144 eDP + hotplug of USB-C DP display
we see FIFO underflow.
[How]
We have the path to trigger the resync as the workaround in
DCN314/DCN32, it just needs to be ported over to DCN35.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
VBios & Driver may have differnet pixel rate div policy.
If the policy is not same and fast boot is enabled,
it would cause the pixel rate is too high
after driver only performs stream blank & unblank.
[how]
We would keep pixel rate div setting by VBios until next mode set.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 29 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for HDMISTREAMCLK and only
disable it when it's actively being used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Update dmub and driver interface for future FAMS revisions.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled
[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
We need to remove the reference to these registers to
prevent any usage in the future.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active
[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cc ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 54d9490314 ("drm/amd/display: Set the power_down_on_boot
function pointer to null")
[why & how]
This commit breaks S0i3 entry because DCN does not enter IPS2.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN
gets powered off due to dc_power_down_on_boot() being called after
timeout.
[HOW]
Setting the power_down_on_boot function pointer to null since we don't
expect the function to be called for APU.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
