[Why]
The boolean fast_validate is used as an
input parameter in multiple functions. To
support more scenarios, we are
replacing it with enum dc_validate_mode.
[How]
The enum dc_validate_mode introduces three
possible values:
1) DC_VALIDATE_MODE_AND_PROGRAMMING:
Apply the mode to hardware
2) DC_VALIDATE_MODE_ONLY:
Check whether the mode can be supported
3) DC_VALIDATE_MODE_AND_STATE_INDEX:
Check if the mode can be supported, and
determine the optimal voltage level
needed to support it.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yan Li <yan.li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
log2_blk_height and log2_blk_width are assigned to 0 and then
immediately are updated to other values. The assignments to zero are
redudant and removed.
This fixes 18 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
TimeForFetchingMetaPTE, TimeForFetchingRowInVBlank and
LinesToRequestPrefetchPixelData are local variables. They
are freed when CalculatePrefetchSchedule() ends and need
not clearing explicitly.
This fixes 21 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
req128_c is always set to false and its branch is never taken.
Similarly, MacroTileSizeBytes is set to either 256 or 65535 and it is
never 4096 and it's branch is not taken.
Therefore, their branches are removed.
This fixes 3 DEADCODE issues reported by Coverity.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In current design, the vstartup position is adjusted to
vblank start position when AS-SDP is enabled.
However when the vblank length is too big, it may over
vstartup boundary.
[How]
To adjust vstartup position to 1 line before vsync position.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variables, used as denominators and maybe not assigned to other values,
should not be 0. bytes_per_element_y & bytes_per_element_c are
initialized by get_bytes_per_element() which should never return 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For no plane scenarios we should not consider cursor as there cannot
be any cursor if there's no planes. This fixes an issue where
dc_commit_streams fails due to prefetch bandwidth requirements
(the display config + dummy planes + cursor causes the prefetch
bandwidth to exceed what is possible).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
1. is_pwrseq0 needs to check link before accessing link->link_index.
2. context is checked before accessing its bw_ctx.dml2
3. clk_mgr_base->bw_params is checked before clk_table.num_entries_per_cl
This fixes 4 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged these files as containing DEADCODE, i. e.
redundant or unreachabale. In these files, variable 'mode_422' is
always the same file (0 or false), so any code logic with it is
redundant.
[HOW]
Removed 'mode_422' variable and all code with it from
'display_rq_dlg_calc_' functions in dml.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These portions of code are flagged as 'UNUSED_VALUE' by the
Coverity analysis since the assigned values of these vars
are never used in the code.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Integer divisions result in loss of fractional and accuracy is lost
when assigned or compared with double. It is necessary to perform
double/integer instead or explicitly cast them to double.
This fixes 54 UNINTENDED_INTEGER_DIVISION issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 29 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enabling higher compiler warning levels results in many issues that can
be trivially resolved as well as some potentially critical issues.
[how]
Fix all compiler warnings found with various compilers and higher
warning levels. Primarily, potentially uninitialized variables and
unreachable code.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was included in gpu_info firmware, move it into the
driver for consistency with other nv1x parts.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Part of the dc_state interface that deals with adding streams and planes should
remain public, while others that deal with internal status' and subvp should be
private to DC.
[HOW?]
Move and rename the public functions to dc_state.h and private functions to
dc_state_priv.h. Also add some additional functions for extracting subvp meta
data from the state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flickering occurs on DRR supported panels when engaged in DRR due to
min_dst_y_next becoming larger than the frame size itself.
[How]
In general, we should be able to enter Z8 when this is engaged but it
might be a net power loss even if the calculation wasn't bugged.
Don't support enabling Z8 during the DRR region.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn20_validate_bandwidth_fp() is invoked while FPU access has been
enabled. FPU access requires disabling preemption even on PREEMPT_RT.
It is not possible to allocate memory with disabled preemption even with
GFP_ATOMIC on PREEMPT_RT.
Move the memory allocation before FPU access is enabled.
To preserve previous "clean" state of "pipes" add a memset() before the
second invocation of dcn20_validate_bandwidth_internal() where the
variable is used.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn21_validate_bandwidth_fp() is invoked while FPU access has been
enabled. FPU access requires disabling preemption even on PREEMPT_RT.
It is not possible to allocate memory with disabled preemption even with
GFP_ATOMIC on PREEMPT_RT.
Move the memory allocation before FPU access is enabled.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217928
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For multi-GPU systems it is difficult to tell which GPU a particular
message is being printed for and that is undesirable because it
complicates debugging efforts. Also, the new macros allow us to enable
logging for particular parts of the codebase more selectively (since we
no longer need to throw everything at DRM_DEBUG_KMS()). So, for the
reasons outlined above we should switch to the new macros.
We can accomplish this by using the existing DC_LOGGER code to pass
around the relevant `struct drm_device` which will be fed to the new
macros in logger_types.h. Also, we must get rid of all instances of the
DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use
the DC logger there and we can simply refer to the macros directly
there instead.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().
Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a31e8b89b.
We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+
ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Redesign pipe resource interfaces in resource.h file. The new interface
design addresses the issue with lack of pipe topology encapsulation and
lack of pipe accessors.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a lack of encapsulation of pipe connection representation in pipe context.
This has caused many challenging bugs and coding errors with repeated
logic to identify the same pipe type.
[how]
Formally define pipe types and provide getters to identify a pipe type and
find a pipe based on specific requirements. Update existing logic in non dcn
specific files and dcn32 and future versions to use the new accessors.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calls to dcn20_adjust_freesync_v_startup are no longer
needed as of dcn3+ and can cause underflow in some cases
[How]
Move calls to dcn20_adjust_freesync_v_startup up into
validate_bandwidth for dcn2.x
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Adding debug options to override Z8 watermark values for testing purposes.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Previously update_clocks was overriding pstate support if
it checked that there were no planes
- However, P-State support should be determined in validation
phase instead
- This fixes an issue where a transition from FPO -> no planes
expects UCLK MAX, but update_clocks was overriding to set
UCLK to min
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flickering and underflow was observed when testing extended
blank on dcn314.
[What]
Vstartup is contrainted by vblank_nom, so adjusting it to include
non-adjusted vtotal in its calculation during freesync video
means that Vstartup is not changed when vtotal changes.
This fixed the flickering + underflow.
dc_extended_blank_supported function was removed
because extended blank is only relevant to when
zstate is supported. The increased vtotal during
freesync can be passed to dml regardless of whether
extended blank is supported or not, so this function is
not needed.
Updates were made recently in dml to the calculation of
min_dst_y_next_start. Dml input for dcn314 will now
always use the newer calculation for min_dst_y_next_start.
Dml input for older dcn versions remains untouched.
The variable optimized_min_dst_y_next_start
is replaced everywhere with min_dst_y_next_start,
and the updated dml allows min_dst_y_next_start to
increase to an optimized value during freesync video,
then return to default when freesync is disengaged.
Also removed registry key for controlling
extended blank feature.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit replaces spaces with tabs in multiple functions and adjusts
the indentation in some other parts of the code to improve readability.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
All dc subcomponents should call another dc component via function pointers
stored in a component structure. This is part of dc coding convention since
the beginning. The reason behind this is to improve encapsulation and
polymorphism. The function contract is extracted into a single link service
structure defined in link.h header file and implemented only in link_factory.c instead
of spreading across multiple files in link component file structure.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allows finer control and tuning for debug and profiling.
[How]
Add the debug option into DC. The default remains the same as before
for now.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A conversion from 'bool' to 'enum odm_combine_mode' was incomplete,
and gcc warns about this with many instances of
display/dc/dml/dcn20/display_mode_vba_20.c:3899:44: warning: implicit conversion from 'enum <anonymous>' to 'enum
odm_combine_mode' [-Wenum-conversion]
3899 | locals->ODMCombineEnablePerState[i][k] = false;
Change the ones that we get a warning for, using the same numerical
values to leave the behavior unchanged.
Fixes: 5fc1159816 ("drm/amd/display: expand dml structs")
Link: https://lore.kernel.org/all/20201026210039.3884312-3-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927100659.1431744-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.
[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Start enabling AdaptiveSync feature on Linux environment.
[how]
Adding AdaptiveSync support in DC layer
- building AdaptiveSync info_packets
- adjusting the v_startup parameter
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Low dscclk in high vlevels blocks some DSC modes.
[HOW]
Update dscclk to 1/3 of dispclk.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if we block Z9 based on crossover threshold it's possible to
allow for Z8.
[How]
There's support for this on DCN314, so update the support types to
include a z8 only and z8_z10 only state.
Update the decide_zstate_support function to allow for specifying
these modes based on the Z8 threshold.
DCN31 has z-state disabled, but still update the legacy code to
map z8_only = disallow and z10_z8_only = z10_only to keep the support
the same.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN3.2 DML logic uses a new output type for DP2.0,
which will enable validation to pass for higher BW
timings that require DP2.0 link rates.
[How]
Populate the DML pipe with DP2.0 output type if
the signal type of the pipe_ctx is 128b/132b.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missed enabling timing sync on DCN32 because DCN32 has a different DML
param.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We split out PSR config from "global" to "per-panel" config settings.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Conditionals in the DML basic math functions significantly impact mode
enumeration.
[how]
Remove conditionals for floor/ceil operations which are used frequently
in DML and add an assertion for invalid callers using zero granuality.
Fix existing callers that rely on 0 granularity.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we are using soc._clock_tmp[] to temporarily store and modify
data from soc.clock_limits[] before copying it back into
soc.clock_limits[] (because modifying data directly in
soc.clock_limits[] causes unintended behavior). However, this approach
has a number of downsides, such as:
1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction
aren't well defined (which could mean more unintended
behavior).
2. Throwing "temp" varibles in structs everywhere doesn't make
for a particularly readable codebase.
For these reasons, we should get rid of soc._clock_tmp[] by defining a
struct scratch within struct dc that, contains within it all of the
temporary variables (including _clock_tmp[]) such that it is obvious how
they are intended to be used.
Co-authored-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing headers to solve the following warnings from sparse:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static?
Fixes: 1a3408259b ("drm/amd/display: move FPU code on dcn21 clk_mgr")
Fixes: 5085e0361f ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder")
Fixes: 26f4712aed ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Fixes: fa896297b3 ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder")
Fixes: 3f8951cc12 ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder")
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
