To avoid a cast when calling drm_dev_wedged_event(), replace pid and
task name inside of struct amdgpu_task_info with struct
drm_wedge_task_info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-6-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
rocm-smi with superuser permission doesn't show some
of smi events, i.e. page fault/migration, because the
condition of "(events & all)" is false. Superuser
should be able to detect all events, the condiiton of
"(events & all)" seems redundant, so removing it will
fix the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mistake will lead to NULL kernel oops, so fix it.
Fixes: 4172b556fd ("drm/amdkfd: add smi events for process start and end")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rocm-smi will be able to show the events for KFD process
start/end, it is the implementation of this feature.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit a3ab2d45b9.
The userspace side for this code is not ready yet so revert
for now.
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Philip Yang <Philip.Yang@amd.com>
Add new SMI event to report the dropped event count.
When the event kfifo is full, drop count is not zero, or no enough space
left to store the event message, increase drop count.
After reading event out from kfifo, if event was dropped, drop_count is
not zero, generate a dropped event record and reset drop count to zero.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMI event fifo size 1KB was enough to report GPU vm fault or reset
event, but could drop the more frequent SVM migration events. Increase
kfifo size to 8KB to store about 100 migrate events, less chance to drop
the migrate events if lots of migration happened in the short period of
time. Add KFD prefix to the macro name.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If page migration failed, also output migrate end event to match with
migrate start event, with failure error_code added to the end of the
migrate message macro. This will not break uAPI because application uses
old message macro sscanf drop and ignore the error_code.
Output GPU page fault restore end event if migration failed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Document how to use SMI system management interface to enable and
receive SVM events. Document SVM event triggers.
Define SVM events message string format macro that could be used by user
mode for sscanf to parse the event. Add it to uAPI header file to make
it obvious that is changing uAPI in future.
No functional changes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
reset cause is requested by customer as additional
info for gpu reset smi event.
v2: integerate reset sources suggested by Lijo Lazar
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.
This patch also does logistical changes required for existing usage
of vm->task_info.
V2: Do not block all the prints when task_info not found (Felix)
V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()
V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX 9.4.3, there can be multiple KFD nodes. As a result,
SMI events for SVM, queue evict/restore should be raised for
each node independently.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces multi-partition support in KFD.
This patch includes:
- Support for maximum 8 spatial partitions in KFD.
- Initialize one HIQ per partition.
- Management of VMID range depending on partition mode.
- Management of doorbell aperture space between all
partitions.
- Each partition does its own queue management, interrupt
handling, SMI event reporting.
- IOMMU, if enabled with multiple partitions, will only work
on first partition.
- SPM is only supported on the first partition.
- Currently, there is no support for resetting individual
partitions. All partitions will reset together.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.
This is the first step in adding compute partition support in KFD.
v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The synchronize_rcu may take several ms, which noticeably slows down
applications close SMI event handle. Use call_rcu to free client->fifo
and client asynchronously and eliminate the synchronize_rcu call in the
user thread.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SVM range unmapped from GPUs when range is unmapped from CPU, or with
xnack on from MMU notifier when range is evicted or migrated.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Output user queue eviction and restore event. User queue eviction may be
triggered by svm or userptr MMU notifier, TTM eviction, device suspend
and CRIU checkpoint and restore.
User queue restore may be rescheduled if eviction happens again while
restore.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For migration start and end event, output timestamp when migration
starts, ends, svm range address and size, GPU id of migration source and
destination and svm range attributes,
Migration trigger could be prefetch, CPU or GPU page fault and TTM
eviction.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ktime_get_boottime_ns() as timestamp to correlate with other
APIs. Output timestamp when GPU recoverable fault starts and ends to
recover the fault, if migration happened or only GPU page table is
updated to recover, fault address, if read or write fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Process receive event from same process by default. Add a flag to be
able to receive event from all processes, this requires super user
permission.
Event using pid 0 to send the event to all processes, to keep the
default behavior of existing SMI events.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This ensures userspace cannot prematurely clean-up the client before
it is fully initialised which has been proven to cause issues in the
past.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
To enable compiler type-checked against the format string in callers.
All warnings (new ones prefixed by >>):
>> warning: function 'kfd_smi_event_add' might be a candidate for
'gnu_printf' format attribute [-Wsuggest-attribute=format]
Fixes: d58b8a99cb ("drm/amdkfd: Add SMI add event helper")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To remove duplicate code, unify event message format and simplify new
event add in the following patches.
Use KFD_SMI_EVENT_MSG_SIZE to define msg size, the same size will be
used in user space to alloc the msg receive buffer.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sizeof(buf) is 8 bytes because it is defined as unsigned char *buf,
each SMI event read only copy max 8 bytes to user buffer. Correct this
by using the buf allocate size.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the SPDX License header for all the KFD files.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those implementation details(whether swsmu supported, some ppt_funcs supported,
accessing internal statistics ...)should be kept internally. It's not a good
practice and even error prone to expose implementation details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove get_amdgpu_device and other remaining kgd_dev references aside
from declaration/kfd struct entry and initialization.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for reporting GPU reset events through SMI. KFD
would report both pre and post GPU reset events.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Event bitmask is a 64-bit mask with only 1 bit set. Sending this
event bitmask in KFD SMI event message is both wasteful of memory
and potentially limiting to only 64 events. Instead send event
index in SMI event message.
Please note this change does not break the ABI for the two event
types defined so far. The new index is identical to the mask used
before.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buffer allocated is of 1024 bytes. Allocate this from
heap instead of stack.
Also remove check for stack size since we're allocating from heap
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.
VM fault event is done in this patch.
v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
