When switching to new GPU index after hibernation and then resume,
VRAM offset of each VRAM BO will be changed, and the cached gpu
addresses needed to updated.
This is to enable pdb0 and switch to use pdb0-based virtual gpu
address by default in amdgpu_bo_create_reserved(). since the virtual
addresses do not change, this can avoid the need to update all
cached gpu addresses all over the codebase.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add amdgpu_bo_fb_aper_addr() and update the cached GPU addresses to use
the FB aperture address for SMU and PSP.
2 reasons for this change:
1. when pdb0 is enabled, gpu addr from amdgpu_bo_create_kernel() is GART
aperture address, it is not compatible with SMU and PSP, it need to be
updated to use FB aperture address.
2. Since FB aperture address will change after switching to new GPU
index after hibernation, it need to be updated on resume.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct pcie replay count reporting is not available on nbio v7.9.
Reporting is done through firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Fixes: 50709d18f4 ("drm/amdgpu: Add pci replay count to nbio v7.9")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the psp_vbflash and psp_vbflash_status available in sysfs.
v2: make it available for v14.0.2 as well (hawking)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV VM env with XGMI enabled systems, XGMI physical node id may
change when hibernate and resume with different VF.
Update XGMI info and vram_base_offset on resume for gfx444 SRIOV env.
Add amdgpu_virt_xgmi_migrate_enabled() as the feature flag.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-7-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
To avoid a cast when calling drm_dev_wedged_event(), replace pid and
task name inside of struct amdgpu_task_info with struct
drm_wedge_task_info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-6-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
To avoid repetitive code in amdgpu, create a function that prints the
content of struct amdgpu_task_info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-3-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Allow NULL pointers at amdgpu_vm_put_task_info() as it common practice
for "put" or "free" functions. This avoid an extra check for NULL for
callers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-2-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- Add userq fence support to SDMAv7.0.
- GFX12's user fence irq src id differs from GFX11's,
hence we need create a new irq srcid header file for GFX12.
User fence irq src id information-
GFX11 and SDMA6.0 - 0x43
GFX12 and SDMA7.0 - 0x46
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "num_syncobj_handles" is a u32 value that comes from the user via the
ioctl. On 32bit systems the "sizeof(uint32_t) * num_syncobj_handles"
multiplication can have an integer overflow. Use size_mul() to fix that.
Fixes: 38c67ec9aa ("drm/amdgpu: Add input fence to sync bo map/unmap")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch only affects 32bit systems. There are several integer
overflows bugs here but only the "sizeof(u32) * num_syncobj"
multiplication is a problem at runtime. (The last lines of this patch).
These variables are u32 variables that come from the user. The issue
is the multiplications can overflow leading to us allocating a smaller
buffer than intended. For the first couple integer overflows, the
syncobj_handles = memdup_user() allocation is immediately followed by
a kmalloc_array():
syncobj = kmalloc_array(num_syncobj_handles, sizeof(*syncobj), GFP_KERNEL);
In that situation the kmalloc_array() works as a bounds check and we
haven't accessed the syncobj_handlesp[] array yet so the integer overflow
is harmless.
But the "num_syncobj" multiplication doesn't have that and the integer
overflow could lead to an out of bounds access.
Fixes: a292fdecd7 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users have reported that they have to reduce the level of undervolting
to acheive stability when dynamic workload profiles are enabled on
GC 10.3.x. Disable dynamic workload profiles if the user has enabled
OD.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4262
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.15.x
This patch updates the cleaner shader, which is responsible for
initializing GPU resources such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs). Changes include adjustments to register clearing and shader
configuration.
- Updated GPU resource initialization addresses in the cleaner shader
from `be803080` to `be803000`.
- Simplified the logic in the SGPR clearing section, ensuring all SGPRs
are set to zero.
Fixes: 25961bad92 ("drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Manu Rastogi <manu.rastogi@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more checks for valid vram size and log error, if any.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the goal of reducing the need for drivers to touch (and dereference)
fence->ops, we move the 64-bit seqnos flag from struct dma_fence_ops to
the fence->flags.
Drivers which were setting this flag are changed to use new
dma_fence_init64() instead of dma_fence_init().
v2:
* Streamlined init and added kerneldoc.
* Rebase for amdgpu userq which landed since.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250515095004.28318-3-tvrtko.ursulin@igalia.com
For simulation C models that don't run CP FW where adev->mes.sched_version
is not populated correctly. This causes NULL dereference in
amdgpu_amdkfd_free_gtt_mem(dev->adev, (void **)&pqn->q->wptr_bo_gart)
and warning on unpinned BO in amdgpu_bo_gpu_offset(q->properties.wptr_bo).
Compared with adding version check here and there,
always map wptr BO to GART simplifies things.
v2: Add NULL check in amdgpu_amdkfd_free_gtt_mem.(Philip)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nothing uses them so remove them. Leftover from
MES bring up.
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take the MES lock.
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For supported ASICs DMCU version is exported, but ASICs that support
DMCUB there is no information exported to sysfs.
Add an attribute for DMCUB.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20250527155942.476354-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
after getting mca address for old eeprom records with 'address==0', it can be
correctly parsed under none-nps1, or it will be dropped.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get MCA address from PA in nps1, then convert MCA address to PA in specific nps
mode.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add userq fence support to SDMAv6.0
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_mm allocator tolerated being passed end > mm->size, but the
drm_buddy allocator does not.
Restore the pre-buddy-allocator behavior of allowing such placements.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3448
Signed-off-by: John Olender <john.olender@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The addition of register read-back in VCN v5.0.1 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v5.0.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v4.0.5 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v4.0.3 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v4.0.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v3.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v2.5 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v2.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3: drop changes where readbacks have implemented. This patch set
is to add readbacks only.
V2: use common register UVD_STATUS for readback (standard PCI MMIO
behavior, i.e. readback post all writes to let the writes hit
the hardware)
add readback in ..._stop() for more coverage.
Similar to the changes made for VCN v4.0.5 where readback to post the
writes to avoid race with the doorbell, the addition of register
readback support in other VCN versions is intended to prevent potential
race conditions, even though such issues have not been observed yet.
This change ensures consistency across different VCN variants and helps
avoid similar issues. The overhead introduced is negligible.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP is a child device to GFX, and its device specific information
is not available in ACPI. Adding the 2 GPIO resources required for
ISP_v4_1_1 in amdgpu_isp driver.
- GPIO 0 to allow sensor driver to enable and disable sensor module.
- GPIO 85 to allow ISP driver to enable and disable ISP RGB streaming mode.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Log fences using the same format for coherency.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-11-pierre-eric.pelloux-prayer@amd.com
Its only purpose was for trace events, but jobs can already be
uniquely identified using their fence.
The downside of using the fence is that it's only available
after 'drm_sched_job_arm' was called which is true for all trace
events that used job.id so they can safely switch to using it.
Suggested-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-9-pierre-eric.pelloux-prayer@amd.com
This will be used in a later commit to trace the drm client_id in
some of the gpu_scheduler trace events.
This requires changing all the users of drm_sched_job_init to
add an extra parameter.
The newly added drm_client_id field in the drm_sched_fence is a bit
of a duplicate of the owner one. One suggestion I received was to
merge those 2 fields - this can't be done right now as amdgpu uses
some special values (AMDGPU_FENCE_OWNER_*) that can't really be
translated into a client id. Christian is working on getting rid of
those; when it's done we should be able to squash owner/drm_client_id
together.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-3-pierre-eric.pelloux-prayer@amd.com
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----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=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
To unmap and free seq64 memory when drm node close to free vm, if there
is signal accepted, then taking vm lock failed and leaking seq64 va
mapping, and then dmesg has error log "still active bo inside vm".
Change to use uninterruptible lock fix the mapping leaking and no dmesg
error log.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_ctx_mgr_fini() calls amdgpu_ctx_mgr_entity_fini() it contains
the exact same "context still alive" check as it will do next. Remove the
duplicated copy.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function amdgpu_ctx_mgr_entity_fini() only has a single local caller so
lets make it local.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't enable BACO when in passthrough. PCI resets don't work
correctly when in BACO.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs nodes to provide compute paritition specific data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current cleanup order during file descriptor close can lead to
a race condition where the eviction fence worker attempts to access
a destroyed mutex from the user queue manager:
[ 517.294055] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 517.294060] WARNING: CPU: 8 PID: 2030 at kernel/locking/mutex.c:564
[ 517.294094] Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
The issue occurs because:
1. We destroy the user queue manager (including its mutex) first
2. Then try to destroy eviction fences which may have pending work
3. The eviction fence worker may try to access the already-destroyed mutex
Fix this by reordering the cleanup to:
1. First mark the fd as closing and destroy eviction fences,
which flushes any pending work
2. Then safely destroy the user queue manager after we're certain
no more fence work will be executed
The copy in amdgpu_driver_postclose_kms() needs to be removed (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lock and refer to the eviction fence before the eviction fence
schedules work queue tries to signal it.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-19-jirislaby@kernel.org
The eviction fence destroy path incorrectly calls dma_fence_put() on
evf_mgr->ev_fence after releasing the ev_fence_lock. This introduces a
potential use-after-unlock or race because another thread concurrently
modifies evf_mgr->ev_fence.
Fix this by grabbing a local reference to evf_mgr->ev_fence under the
lock and using that for dma_fence_put() after waiting.
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These structures are basically ported from MMSCH v4_0
The structures are the same as v4_0 except for the
init header
Signed-off-by: fanhuang <FangSheng.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compatible NPS modes for a partition mode are exposed through xcp_config
interface. To determine if a compute partition mode is valid, check if
the current NPS mode is part of compatible NPS modes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the MEC firmware supports chaining runlists of XNACK+/XNACK-
processes, set SQ_CONFIG1 chicken bit and SET_RESOURCES bit 28.
When the MEC/HWS supports it, KFD checks the XNACK+/XNACK- processes mix
happens or not. If it does, enter over-subscription.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. Adding
register read-back after written at function end is to ensure
all register writes are done before they can be used.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c9db090b)
Cc: stable@vger.kernel.org
Expose the debugfs file node for user space to dump the IFWI image
on spirom.
For one transaction between PSP and host, it will read out the
images on both active and inactive partitions so a buffer with two
times the size of maximum IFWI image (currently 16MByte) is needed.
v2: move the vbios gfl macros to the common header and rename the
bo triplet struct to spirom_bo for this specific usage (Hawking)
v3: return directly the result of last command execution (Lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the userq resource was already freed at the drm_release
early phase, it should avoid freeing userq resource again
at the later kms postclose callback.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A circular locking dependency was detected between the global
`adev->userq_mutex` and per-file `userq_mgr->userq_mutex` when
creating user queues. The issue occurs because:
1. `amdgpu_userq_suspend()` and `amdgpu_userq_resume` take `adev->userq_mutex` first, then
`userq_mgr->userq_mutex`
2. While `amdgpu_userq_create()` takes them in reverse order
This patch resolves the issue by:
1. Moving the `adev->userq_mutex` lock earlier in `amdgpu_userq_create()`
to cover the `amdgpu_userq_ensure_ev_fence()` call
2. Releasing it after we're done with both queue creation and the
scheduling halt check
v2: remove unused adev->userq_mutex lock (Prike)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. Adding
register read-back after written at function end is to ensure
all register writes are done before they can be used.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a5c060b59)
Cc: stable@vger.kernel.org
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dbbfb3c17)
Cc: stable@vger.kernel.org
This patch enables per-queue and per-pipe reset functionality for
GFX IP v9.5.0 when using MEC firmware version 21 (0x15) or later.
This change:
1. Refactors the pipe reset support check in gfx_v9_4_3_pipe_reset_support()
to use the compute_supported_reset flags instead of hardcoding
version checks.
2. Adds support for GFX9.5.0 (IP 9.5.0) with MEC firmware version >= 21
to enable per-queue and per-pipe reset capabilities.
v2: Replaced mec version check with !!(adev->gfx.compute_supported_reset & AMDGPU_RESET_TYPE_PER_PIPE) (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set vram type so we can take different actions according to the type.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code more general, user doesn't need to pay attention to the
detail of flip bits setting.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of newly added de counts and the number of
newly added error addresses remain consistent
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During driver load, RAS event manager may not be initialized. This will
cause any ATHUB event during driver load to be skipped in dmesg log. Log
the error in dmesg log for easier diagnosis.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves a deadlock between user queue management and GPU reset
paths by enforcing consistent lock ordering.
The deadlock occurred when:
1. Process exit path (amdgpu_userq_mgr_fini) would:
- Take uqm->userq_mutex
- Then try to take adev->userq_mutex for list operations
2. GPU reset path (amdgpu_userq_pre_reset) would:
- Take adev->userq_mutex first (for list traversal)
- Then take uqm->userq_mutex
The solution establishes a strict top-down locking order:
1. Always take adev->userq_mutex before any uqm->userq_mutex
2. Maintain this order consistently across all code paths
Changes made:
- Reordered locking in amdgpu_userq_mgr_fini() to take device lock first
- Kept existing proper order in amdgpu_userq_pre_reset()
- Simplified the fini flow by removing redundant operations
This prevents circular dependencies while maintaining thread safety
during both normal operation and GPU reset scenarios.
Fixes: 4ce60dbada ("drm/amdgpu: store userq_managers in a list in adev")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get RAS retire flip bits for HBM with different types in various NPS modes.
Also set flip row bit and MCA R13 bit in PA in different NPS modes.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RAS bad page retire flip bits can be set per vram type,
vram vendor and NPS mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the general interface to get flip bits for RAS bad page retirement.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per UMC address conversion algorithm, the high row bits of UMC MCA
address are changed when they're converted into normalized address
on specific ASICs.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support new version of HBM.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
there is only MCA records in V3, no need to care about PA records.
recalculate the value of ras_num_bad_pages when parsing failed and
go on with the left records instead of quit.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To resolve the warning regarding the missing error code 'r' in
amdgpu_userq_wait_ioctl(), assign the value 'r = -EINVAL'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080458.rnV8YfiY-lkp@intel.com/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Except HDP v5.2 all use a common logic for HDP flush. Use a generic
function. HDP v5.2 forces NO_KIQ logic, revisit it later.
Reapply after fixing up an HDP regression.
v2: merge the fix (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APU doesn't have second IH ring, so re-routing action here is a no-op.
It will take a lot of time to wait timeout from PSP during the
initialization. So remove the function in psp v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241)
Cc: stable@vger.kernel.org
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ce8f7d9589)
Cc: stable@vger.kernel.org
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c89ceda99)
Cc: stable@vger.kernel.org
If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.
Add a reset callback for the ring which will stop and start VCN if an
issue happens.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250506204948.12048-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.
Add a reset callback for the ring which will stop and start VCN if an
issue happens.
Link: https://lore.kernel.org/r/20250506204948.12048-3-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a problem occurring on VCN 4.0.5 where in some situations a job
is timing out. This triggers a job timeout which then causes a GPU
reset for recovery. That has exposed a number of issues with GPU reset
that have since been fixed. But also a GPU reset isn't actually needed
for this circumstance. Just restarting the ring is enough.
Add a reset callback for the ring which will stop and start VCN if the
issue happens.
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3909
Link: https://lore.kernel.org/r/20250506204948.12048-2-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 18a878fd8a.
Revert this temporarily to make it easier to fix a regression
in the HDP handling.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since secure firmware is more stable than bring up phase, I believe we
don't need such mdelays any more before wait PSP response on PSP v12.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If applications unmap the memory before destroying the userptr, it needs
trigger a segfault to notify user space to correct the free sequence in
VM debug mode.
v2: Send gpu access fault to user space
v3: Report gpu address to user space, remove unnecessary params
v4: update pr_err into one line, remove userptr log info
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In VM debug mode, it is desirable to notify the application
to correct the freeing sequence by unmapping the memory before
destroying the userptr in the old userptr path. Add a bitmask
to decide whether to send gpu vm fault to the applition.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It requires unlocking the reserved gem BO before returning from
attaching the eviction fence error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver doesn't want to implicitly sync on the DMA_RESV_USAGE_BOOKKEEP
usage fences, and the BOOKEEP fences should be synced explicitly. So, as
the VM implicit syncing only need to return and sync the dependent read
fences.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an optional TA which is only available on
certain embedded systems. Mark it as optional to avoid
user confusion. This mirrors what we already do for
other optional TAs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4181
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This notification may arrive in VF mailbox while polling for response from
another event.
This patches covers the following scenarios:
- If VF is already in RMA state, then do not attempt to contact the host.
Host will ignore the VF after sending the notification.
- If the notification is detected during polling, then set the RMA status,
and return error to caller.
- If the notification arrives by interrupt, then set the RMA status and
queue a reset. This reset will fail and VF will stop runtime services.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host may stop runtime services after reaching a bad page threshold.
This notification will indicate to the VF that it no longer has
access to the GPU.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host will send a notification when new bad pages are available.
Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.
This patch adds the following:
1) Host Bad Pages notification message.
2) Guest request bad pages message.
When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some random documentation associated with the ring buffer
manipulations and writeback.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Keep only the latest fences to reduce the number of values
given back to userspace
v2: - Export this code from dma-fence-unwrap.c(by Christian).
v3: - To split this in a dma_buf patch and amd userq patch(by Sunil).
- No need to add a new function just re-use existing(by Christian).
v4: Export dma_fence_dedub_array function and used it(by Christian).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjusted the enforce isolation setting handling to include the ability
to disable the cleaner shader without affecting isolation between tasks.
v2: Updated enforce isolation documentation and parameters. (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the functions in amdgpu_userqueues.c from
DRM_DBG_DRIVER to drm_dbg_driver so multi gpu instance
can be logged in.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change the DRM_ERROR and drm_err to drm_file_err
to add process name and pid to the logging.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_file will be used in usermode queues code to
enable better process information in logging and hence
add drm_file part of the userq_mgr struct.
update the drm_file pointer in userq_mgr for each
amdgpu_driver_open_kms.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c)
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cd)
Cc: stable@vger.kernel.org
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689)
The "ticket" pointer points to in the middle of the &exec struct so it
can't be NULL. Remove the check.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path should call amdgpu_bo_unreserve() before returning.
Fixes: d8675102ba ("drm/amdgpu: add vm root BO lock before accessing the vm")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kernel queues are disabled, all GC vmids are available
for the scheduler. MM vmids are still managed by the driver
so make all 16 available.
Also fix gmc 10 vs 11 mix up in
commit 1f61fc28b9 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
v2: Properly handle pre-GC 10 hardware
Fixes: 1f61fc28b9 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
Cc: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the KIQ pipe for kernel queues and the SCHED pipe for
user queues.
Fixes: 2408b0272b ("drm/amdgpu/mes: consolidate on a single mes reset callback")
Cc: Michael Chen <Michael.Chen@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the legacy one as it covers both kernel queues and
user queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from mes bring up and are unused.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If it needs a long wait for completion of bootloader execution, report
the status in between. That helps to know if there is some issue during
bootloader execution.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Register access print missed device info.
[How]
Using dev_xxx instead of DRM_xxx to indicate which device
of a hive is the message for.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the register offsets as per link order for querying XGMI v6.4.1
link status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Fixes: 6dee64e765 ("drm/amdgpu: Fix xgmi v6.4.1 link status reporting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mes_v11_0_reset_hw_queue and mes_v12_0_reset_hw_queue functions were
using the wrong union type (MESAPI__REMOVE_QUEUE) when getting the offset
for api_status. Since these functions handle queue reset operations, they
should use MESAPI__RESET union instead.
This fixes the polling of API status during hardware queue reset operations
in the MES for both v11 and v12 versions.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-By: Shaoyun.liu <Shaoyun.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.
v2: rebase.
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a description for the get_csb_buffer callback, update the glossary,
and add some extra information about RB, which is associated with CSB
configuration.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplications from gfx_v6_0_get_csb_buffer by using CSB helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having the hardcoded values for the CSB buffer in
gfx_v7_0_get_csb_buffer, use the values calculated in previous steps by
accessing raster_config and raster_config_1.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The evf fence name can clearly identify the userq usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This debug dump will help on debugging the evf attached gem obj fence
related issue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use CSB helpers to remove code duplication from gfx_v7_0_get_csb_buffer.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove code duplication from gfx_v8_0_get_csb_buffer by using CSB
helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate code duplication in gfx_v9_0_get_csb_buffer by using CSB
helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate code by using CSB helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Part of the code in gfx_v11_0_get_csb_buffer can be removed in favor of
some GFX CSB helpers. This commit removes the duplicated part for the
GFX 11 CSB function.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From GFX6 to GFX11, there is a function for getting the CSB buffer to be
put into the hardware. Three common parts are duplicated in all of these
GFX functions:
1. Prepare the CSB preamble.
2. Parser the CS data.
3. End the CSB preamble.
This commit creates helpers to be used from GFX6 to GFX11.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake with the array utcl2_rounter_str, it
appears it should be utcl2_router_str. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC really does not want to consider NULL (or near-NULL) addresses as
valid, so calculations based off of NULL end up getting range-tracked into
being an offset wthin a 0 byte array. It gets especially mad about this:
if (vbios_str == NULL)
vbios_str += sizeof(BIOS_ATOM_PREFIX) - 1;
...
if (vbios_str != NULL && *vbios_str == 0)
vbios_str++;
It sees this as being "sizeof(BIOS_ATOM_PREFIX) - 1" byte offset from
NULL, when building with -Warray-bounds (and the coming
-fdiagnostic-details flag):
In function 'atom_get_vbios_pn',
inlined from 'amdgpu_atom_parse' at drivers/gpu/drm/amd/amdgpu/atom.c:1553:2:
drivers/gpu/drm/amd/amdgpu/atom.c:1447:34: error: array subscript 0 is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=]
1447 | if (vbios_str != NULL && *vbios_str == 0)
| ^~~~~~~~~~
'amdgpu_atom_parse': events 1-2
1444 | if (vbios_str == NULL)
| ^
| |
| (1) when the condition is evaluated to true
......
1447 | if (vbios_str != NULL && *vbios_str == 0)
| ~~~~~~~~~~
| |
| (2) out of array bounds here
In function 'amdgpu_atom_parse':
cc1: note: source object is likely at address zero
As there isn't a sane way to convince it otherwise, hide vbios_str from
GCC's optimizer to avoid the warning so we can get closer to enabling
-Warray-bounds globally.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject queries to get current partition modes during reset. Also, don't
accept sysfs interface requests to switch compute partition mode while
in reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those platforms a lot, and avoids a lot of inadvertent build
regressions.
Add a dependency for CONFIG_PCI and remove all the ones for PCI specific
device drivers that are currently marked not having it.
There are a few platforms that have an optional MMU, but they usually
cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is
mainly for historic reasons, and anyone using those chips should really use
the MMU these days.
Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3)
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae)
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6e)
log context:seqno of the fence during timeout rather
than logging fence pointer.
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is load usermode queue based on FW support for gfx12.
CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123]
v2: Addressed review comments from Alex
- Just check the firmware versions directly.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is load usermode queue based on FW support for gfx11.
CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120]
v2: Addressed review comments from Alex.
- Just check the firmware versions directly.
v3: Firmware version checks only for Navi3x(by Alex).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
suspend/resume -> evict/restore
Rename to avoid confusion with the system suspend
and resume helpers.
v2: update error messages
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to wait for the last fence before unmapping. This
also fixes a memory leak in amdgpu_userqueue_cleanup()
when the fence isn't signalled.
Fixes: b0db33c8c5 ("drm/amdgpu/userq: rework front end call sequence")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed when the map and unmap were split out
of the mqd create and destroy functions.
Fixes: b0db33c8c5 ("drm/amdgpu/userq: rework front end call sequence")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track the state of the queue rather than simple active vs
not. This is needed for other states (hung, preempted, etc.).
While we are at it, move the state tracking into the user
queue front end code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If user queues are disabled for all IPs in the case
of suspend and resume and for gfx/compute in the case
of enforce isolation, we can return early.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print a kernel message when the scrub bit of status register is set to
indicate that errors are being logged by the scrub.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper to get a mask of IPs which support user queues.
Use this in the INFO IOCTL to get the IP mask to replace
the current code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue id support to the user queue wait IOCTL
drm_amdgpu_userq_wait structure.
This is required to retrieve the wait user queue and maintain
the fence driver references in it so that the user queue in
the same context releases their reference to the fence drivers
at some point before queue destruction.
Otherwise, we would gather those references until we
don't have any more space left and crash.
v2: Modify the UAPI comment as per the mesa and libdrm UAPI comment.
Libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/408
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34493
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we initialize the MQD as a secure queue.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use this to track the whether we want TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the minimum firmware version for the Cleaner Shader in the
gfx_v10_0_sw_init function.
This change adjusts the minimum required firmware version for the MEC
firmware from 152 to 151, allowing for broader compatibility with
GFX10.1 GPUs.
Fixes: 25961bad92 ("drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes the deprecated SDMA reset callback mechanism, which was previously used to register pre-reset and post-reset callbacks for SDMA engine resets.
The callback mechanism has been replaced with a more direct and efficient approach using `stop_queue` and `start_queue` functions in the ring's function table.
The SDMA reset callback mechanism allowed KFD and AMDGPU to register pre-reset and post-reset functions for handling SDMA engine resets.
However, this approach added unnecessary complexity and was no longer needed after the introduction of the `stop_queue` and `start_queue` functions in the ring's function table.
1. **Remove Callback Mechanism**:
- Removed the `amdgpu_sdma_register_on_reset_callbacks` function and its associated data structures (`sdma_on_reset_funcs`).
- Removed the callback registration logic from the SDMA v4.4.2 initialization code.
2. **Clean Up Related Code**:
- Removed the `sdma_v4_4_2_set_engine_reset_funcs` function, which was used to register the callbacks.
- Removed the `sdma_v4_4_2_engine_reset_funcs` structure, which contained the pre-reset and post-reset callback functions.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add context and seqno of the fence in error logging
rather than printing fence ptr.
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch refactors the SDMA v5.2 queue reset and stop logic to improve
code readability, maintainability, and performance. The key changes include:
1. **Generalized `sdma_v5_2_gfx_stop` Function**:
- Added an `inst_mask` parameter to allow stopping specific SDMA instances
instead of all instances. This is useful for resetting individual queues.
2. **Simplified `sdma_v5_2_reset_queue` Function**:
- Removed redundant loops and checks by directly using the `ring->me` field
to identify the SDMA instance.
- Reused the `sdma_v5_2_gfx_stop` function to stop the queue, reducing code
duplication.
v1: The general coding style is to declare variables like "i" or "r" last. E.g. longest lines first and short lasts. (Chritian)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch refactors the SDMA v5.0 queue reset and stop logic to improve
code readability, maintainability, and performance. The key changes include:
1. **Generalized `sdma_v5_0_gfx_stop` Function**:
- Added an `inst_mask` parameter to allow stopping specific SDMA instances
instead of all instances. This is useful for resetting individual queues.
2. **Simplified `sdma_v5_0_reset_queue` Function**:
- Removed redundant loops and checks by directly using the `ring->me` field
to identify the SDMA instance.
- Reused the `sdma_v5_0_gfx_stop` function to stop the queue, reducing code
duplication.
v1: The general coding style is to declare variables like "i" or "r" last. E.g. longest lines first and short lasts. (Chritian)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register stop/start/soft_reset queue functions for SDMA IP versions v5.2.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register stop/start/soft_reset queue functions for SDMA IP versions v5.0.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function `amdgpu_sdma_soft_reset` to handle SDMA soft resets directly,
rather than relying on the DPM interface.
1. **New `amdgpu_sdma_soft_reset` Function**:
- Implements a soft reset for SDMA engines by directly writing to the hardware registers.
- Handles SDMA versions 4.x and 5.x separately:
- For SDMA 4.x, the existing `amdgpu_dpm_reset_sdma` function is used for backward compatibility.
- For SDMA 5.x, the driver directly manipulates the `GRBM_SOFT_RESET` register to reset the specified SDMA instance.
2. **Integration into `amdgpu_sdma_reset_engine`**:
- The `amdgpu_sdma_soft_reset` function is called during the SDMA reset process, replacing the previous call to `amdgpu_dpm_reset_sdma`.
v2: r should default to an error (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace old callback mechanism with direct calls to stop/start functions.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable users to create queues at different priority levels.
The highest level is restricted to drm master.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the queue priority set by the user.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track this when we create user queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reuse the _pad field for flags.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enforce isolation serializes access to the GFX IP. User
queues are isolated in the MES scheduler, but we still
need to serialize between kernel queues and user queues.
For enforce isolation, group KGD user queues with KFD user
queues.
v2: split out variable renaming, add config guards
v3: use new function names
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since they will be used for both KFD and KGD user queues,
rename them from kfd to userq. No intended functional
change.
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used to stop/start user queue scheduling for
example when switching between kernel and user queues when
enforce isolation is enabled.
v2: use idx
v3: only stop compute/gfx queues
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track this to align with KFD for enforce isolation
handling.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VF, it doesn't have the permission to clear overflow, clear the bit
by reset.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace disable_kq parameter with user_queue parameter.
The parameter has the following logic:
-1 = auto (ASIC specific default)
0 = user queues disabled
1 = user queues enabled and kernel queues enabled (if supported)
2 = user queues enabled and kernel queues disabled
The default behavior (-1) is currently the same as 0 for current
ASICs. To enable user queues (in addition to kernel queues) set
user_queue=1. To enable user queues and disable kernel queues
(to make all resources available to user queues), set user_queue=2.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable doorbell for JPEG5_0_1 and adjust index for VCN5_0_1.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase vcn doorbell range for gfx950 to 11.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Checkpatch complains if we print an error message for kzalloc()
failure. The kzalloc() failure already has it's own error messages
built in. Also this allocation is small enough that it is guaranteed
to succeed.
2) Return directly instead of doing a goto free_fence_drv. The
"fence_drv" is already NULL so no cleanup is necessary.
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The goto frees "fence_drv" so this is a double free bug. There is no
need to call amdgpu_seq64_free(adev, fence_drv->va) since the seq64
allocation failed so change the goto to goto free_fence_drv. Also
propagate the error code from amdgpu_seq64_alloc() instead of hard coding
it to -ENOMEM.
Fixes: e7cf21fbb2 ("drm/amdgpu: Few optimization and fixes for userq fence driver")
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull it out of the MES code and into the generic code.
It's not MES specific and needs to be applied to all user
queues regardless of the backend.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new function pointers in the amdgpu_sdma structure
to handle queue stop, start and soft reset operations. These will replace
the older callback mechanism.
The new functions are:
- stop_kernel_queue: Stops a specific SDMA queue
- start_kernel_queue: Starts/Restores a specific SDMA queue
- soft_reset_kernel_queue: Performs soft reset on a specific SDMA queue
v2: Update stop_queue/start_queue function paramters to use ring pointer instead of device/instance(Chritian)
v3: move stop_queue/start_queue to struct amdgpu_sdma_instance and rename them. (Alex)
v4: rework the ordering a bit (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since we loop through the queues |= the errors.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unmap user queues on suspend and map them on resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpers to unmap and map user queues on suspend and
resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If userq creation fails, we need to properly unwind and free the
user queue fence driver.
v2: free idr as well (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move some userq fence handling code into amdgpu_userq_fence.c.
This matches the other code in that file.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split out the queue map from the mqd create call and split
out the queue unmap from the mqd destroy call. This splits
the queue setup and teardown with the actual enablement
in the firmware.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename to map and umap to better align with what is happening
at the firmware level and remove the extra level of indirection
in the MES userq code.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d9bff4cf8)
JPEG is not supported on Vega only.
Fixes: 0a6e7b06bd ("drm/amdgpu: Remove JPEG from vega and carrizo video caps")
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0f4dfe86fe)
Cc: stable@vger.kernel.org
On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2aabd44aa8)
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b2ae7d492)
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
This commit modifies the gfx_v9_0_ring_emit_cleaner_shader function
to use a switch statement for cleaner shader emission based on the
specific GFX IP version.
The function now distinguishes between different IP versions, using
PACKET3_RUN_CLEANER_SHADER_9_0 for the versions 9.0.1, 9.1.0,
9.2.1, 9.2.2, 9.3.0, and 9.4.0, while retaining
PACKET3_RUN_CLEANER_SHADER for version 9.4.2.
v2: Simplify logic (Alex).
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces the PACKET3_RUN_CLEANER_SHADER_9_0 definition,
which is a command packet utilized to instruct the GPU to execute the
cleaner shader for the GFX9.0 graphics architecture.
The cleaner shader is a piece of GPU code that is responsible for
clearing or initializing essential GPU resources, such as Local Data
Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar
General Purpose Registers (SGPRs). Properly clearing these resources is
vital for ensuring data isolation and security between different
workloads executed on the GPU.
When the GPU receives this packet, it fetches and runs the cleaner
shader instructions from the specified location in the packet. Thus by
preventing data leaks and ensuring that previous job states do not
interfere with subsequent workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix an array index out of bounds warning in the DMA IP case of
amdgpu_hw_ip_info() where it was incorrectly checking
adev->gfx.gfx_ring[i].no_user_submission instead of
adev->sdma.instance[i].ring.no_user_submission.
The mismatch caused UBSAN to report an array bounds violation since
it was accessing the GFX ring array with SDMA instance indices.
Fixes: 4310acd446 ("drm/amdgpu: add ring flag for no user submissions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
