The gpiochip_get_ngpios() can be used in the cases where passed device
is not a provider of the certain property. Use fwnode instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit 9d846b1aeb ("gpiolib: check the return value of
gpio_chip::get_direction()") we check the return value of the
get_direction() callback as per its API contract. Some drivers have been
observed to fail to register now as they may call get_direction() in
gpiochip_add_data() in contexts where it has always silently failed.
Until we audit all drivers, replace the bail-out to a kernel log
warning.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/dfe03f88-407e-4ef1-ad30-42db53bbd4e4@samsung.com/
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250219144356.258635-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Hardware timestamping is only used on tegra186 platforms but we include
the code and export the symbols everywhere. Shrink the binary a bit by
compiling the relevant functions conditionally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During the locking rework in GPIOLIB, we omitted one important use-case,
namely: setting and getting values for GPIO descriptor arrays with
array_info present.
This patch does two things: first it makes struct gpio_array store the
address of the underlying GPIO device and not chip. Next: it protects
the chip with SRCU from removal in gpiod_get_array_value_complex() and
gpiod_set_array_value_complex().
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250215095655.23152-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract - gpio_chip::get_direction() may fail and return
a negative error number. However, we treat it as if it always returned 0
or 1. Check the return value of the callback and propagate the error
number up the stack.
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-1-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Fixes: 55b2395e4e ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Deduplicate gpiod_direction_input_nonotify() call in
gpiod_direction_output_nonotify() when emulating open-drain
or open-source behaviour. It also aligns the error check
approaches in set_output_value and set_output_flag labels.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250204175646.150577-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The one of previous changes modified the library code to use
helpers from string_choices.h. Nevertheless it misses more
opportunities to convert the code. Here is the second part
of the conversion.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205112936.575493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250114191438.857656-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the newline separator before generating the gpio chip entry to make
the code easier to read.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-4-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the missing newline after entries for recently removed gpio chips
so that the chip sections are separated by a newline as intended.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Cc: stable@vger.kernel.org # 6.9
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Fixes: f9c4a31f61 ("gpiolib: Use seq_file's iterator interface")
Cc: stable@vger.kernel.org # 3.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For optional GPIOs we may pass NULL to gpiod_direction_(input|output)().
With the call to the notifier chain added by commit 07c61d4da4
("gpiolib: notify user-space about in-kernel line state changes") we
will now dereference a NULL pointer in this case. The reason for that is
the fact that the expansion of the VALIDATE_DESC() macro (which returns
0 for NULL descriptors) was moved into the nonotify variants of the
direction setters.
Move them back to the top-level interfaces as the nonotify ones are only
ever called from inside the GPIO core and are always passed valid GPIO
descriptors. This way we'll never call the line_state notifier chain
with non-valid descs.
Fixes: 07c61d4da4 ("gpiolib: notify user-space about in-kernel line state changes")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/d6601a31-7685-4b21-9271-1b76116cc483@sirena.org.uk/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241024133834.47395-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We currently only notify user-space about line config changes that are
made from user-space. Any kernel config changes are not signalled.
Let's improve the situation by emitting the events closer to the source.
To that end let's call the relevant notifier chain from the functions
setting direction, gpiod_set_config(), gpiod_set_consumer_name() and
gpiod_toggle_active_low(). This covers all the options that we can
inform the user-space about. We ignore events which don't have
corresponding flags exported to user-space on purpose - otherwise the
user would see a config-changed event but the associated line-info would
remain unchanged.
gpiod_direction_output/input() can be called from any context.
Fortunately, we now emit line state events using an atomic notifier
chain, so it's no longer an issue.
Let's also add non-notifying wrappers around the direction setters in
order to not emit superfluous reconfigure events when requesting the
lines as the initial config should be part of the request notification.
Use gpio_do_set_config() instead of gpiod_set_debounce() for configuring
debouncing via hardware from the character device code to avoid multiple
reconfigure events.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-8-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With everything else ready, we can now switch to using the atomic
notifier for line state events which will allow us to notify user-space
about direction changes from atomic context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-7-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This effectively reverts commits 9344e34e79 ("gpiolib: cdev: relocate
debounce_period_us from struct gpio_desc") and d8543cbaf9 ("gpiolib:
remove debounce_period_us from struct gpio_desc") and goes back to
storing the debounce period in microseconds in the GPIO descriptor
We're doing it in preparation for notifying the user-space about
in-kernel line config changes.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-3-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We don't need to guard the GPIO chip until its first dereference in
gpio_do_set_config().
First: change the prototype of gpio_do_set_config() to take the GPIO
line descriptor as argument, then move the gpio_chip protection into it
and drop it in two places where it's done too early.
This has the added benefit of making gpio_go_set_config() safe to use
from outside of this compilation unit without taking the gdev SRCU read
lock and will come in handy when we'll want to make it available to the
character device code.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-2-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We notify user-space about lines being requested from user-space or by
drivers calling gpiod_get() but not when drivers request their own lines
so add the missing call to gpiod_line_state_notify().
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-1-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We currently iterate over the descriptors owned by the GPIO device we're
adding twice with the first loop just setting the gdev pointer. It's not
used anywhere between this and the second loop so just drop the first
one and move the assignment to the second.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-2-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We should only use v2 defines for line state change events. They will get
tranlated to v1 if needed by gpio_v2_line_info_changed_to_v1().
This isn't really a functional change as they have the same values but
let's do it for consistency.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-1-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may
return a NULL pointer, leading to a scenario where `label->str` is accessed
without verifying if `label` itself is NULL.
This patch adds a proper NULL check for `label` before accessing
`label->str`. The check for `label->str != NULL` is removed because
`label->str` can never be NULL if `label` is not NULL.
This fixes the issue where the label name was being printed as `(efault)`
when dumping the sysfs GPIO file when `label == NULL`.
Fixes: 5a646e03e9 ("gpiolib: Return label, if set, for IRQ only line")
Fixes: a86d276930 ("gpiolib: fix the speed of descriptor label setting with SRCU")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241003131351.472015-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If we remove a GPIO chip that is also an interrupt controller with users
not having freed some interrupts, we'll end up leaking resources as
indicated by the following warning:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'gpio'
As there's no way of notifying interrupt users about the irqchip going
away and the interrupt subsystem is not plugged into the driver model and
so not all cases can be handled by devlinks, we need to make sure to free
all interrupts before the complete the removal of the provider.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240919135104.3583-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
$ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
67
Fix these by adding Return sections. While at it, make sure all of
Return sections use the same style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240828164449.2777666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
No functional changes are intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240828122039.3697037-1-lihongbo22@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to have and export the count variable for the array
in question. Instead, make it NULL-terminated.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function has been deprecated for some time and is now only used
within the GPIOLIB core. Remove it from the public header and unexport
it as all current users are linked against the compilation unit where
it is defined.
Link: https://lore.kernel.org/r/20240625073815.12376-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpio_suffixes array is defined in the gpiolib.h header. This means
the array is stored in .rodata of every compilation unit that includes
it. Put the definition for the array in gpiolib.c and export just the
symbol in the header. We need the size of the array so expose it too.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240612184821.58053-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Show more info for interrupt only lines in debugfs. It's useful
to monitor the lines that have been never requested as GPIOs,
but IRQs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240530191418.1138003-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO core:
- remove more unused legacy interfaces (after converting the last remaining
users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos
-----BEGIN PGP SIGNATURE-----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=mBWd
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski
"This was a quiet release cycle for the GPIO tree and so this
pull-request is relatively small.
We have one new driver, some minor improvements to the GPIO core code
and across several drivers, some DT and documentation updates but in
general nothing stands out or is controversial. All changes have spent
time in next with no reported issues (or ones that were quickly
fixed).
GPIO core:
- remove more unused legacy interfaces (after converting the last
remaining users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name
fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple
GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to
gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos"
* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
gpio: nuvoton: Fix sgpio irq handle error
gpiolib: Discourage to use formatting strings in line names
gpio: brcmstb: add support for gpio-ranges
gpio: of: support gpio-ranges for multiple gpiochip devices
dt-bindings: gpio: brcmstb: add gpio-ranges
gpio: Add Intel Granite Rapids-D vGPIO driver
gpio: brcmstb: Use dynamic GPIO base numbers
gpiolib: acpi: Set label for IRQ only lines
gpiolib: acpi: Add fwnode name to the GPIO interrupt label
gpiolib: Get rid of never false gpio_is_valid() calls
gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
gpiolib: acpi: Extract __acpi_find_gpio() helper
gpio: sch: Utilise temporary variable for struct device
gpio: sch: Switch to memory mapped IO accessors
gpio: regmap: Use -ENOTSUPP consistently
gpio: pcie-idio-24: Use -ENOTSUPP consistently
Documentation: gpio: Replace leading TABs by spaces in code blocks
gpiolib: acpi: Check for errors first in acpi_find_gpio()
...
We used a per-descriptor SRCU struct in order to not impose a wait with
synchronize_srcu() for descriptor X on read-only operations of
descriptor Y. Now that we no longer call synchronize_srcu() on
descriptor label change but only when releasing descriptor resources, we
can use a single SRCU structure for all GPIO descriptors in a given chip.
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507172414.28513-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
caused a massive drop in performance of requesting GPIO lines due to the
call to synchronize_srcu() on each label change. Rework the code to not
wait until all read-only users are done with reading the label but
instead atomically replace the label pointer and schedule its release
after all read-only critical sections are done.
To that end wrap the descriptor label in a struct that also contains the
rcu_head struct required for deferring tasks using call_srcu() and stop
using kstrdup_const() as we're required to allocate memory anyway. Just
allocate enough for the label string and rcu_head in one go.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/CAMRc=Mfig2oooDQYTqo23W3PXSdzhVO4p=G4+P8y1ppBOrkrJQ@mail.gmail.com/
Fixes: 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507121346.16969-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the cases when gpio_is_valid() is called with unsigned parameter
the result is always true in the GPIO library code, hence the check
for false won't ever be true. Get rid of such calls.
While at it, move GPIO device base to be unsigned to clearly show
it won't ever be negative. This requires a new definition for the
maximum GPIO number in the system.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We are going to remove legacy API from kernel, don't mention
it in the code that does not use it already for a while.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When a gpiochip gets added by loading a module, then another driver may
be waiting for that gpiochip to load on the deferred-probe list.
If the deferred-probe for the consumer of gpiochip then triggers between
the gpiodev_add_to_list_unlocked() calls which makes gpio_device_find()
see the chip and the gpiochip_setup_dev() later then gpio_device_find()
does a kobject_get() on an uninitialized kobject since the kobject is
initialized by gpiochip_setup_dev() calling device_initialize():
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
------------[ cut here ]------------
kobject: 'gpiochip5' (00000000241466f2): is not initialized, yet kobject_get() is being called.
WARNING: CPU: 3 PID: 42 at lib/kobject.c:640 kobject_get+0x43/0x70
Call Trace:
kobject_get
gpio_device_find
gpiod_find_and_request
gpiod_get
snd_byt_wm5102_mc_probe
Not only is the device not initialized yet, but when the gpio-device is
added to the list things like the irqchip also have not been initialized
yet.
So gpio_device_find() should really ignore the gpio-device until
gpiochip_add_data_with_key() is fully done. Add a device_is_registered()
check to gpio_device_find() to ignore gpio-devices on the list which are
not yet fully initialized.
Fixes: aab5c6f200 ("gpio: set device type for GPIO chips")
Suggested-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[Bartosz: fix a typo in commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When gpio-ranges property was missed to be added in the gpio node,
using dev_err() to show an error message will helping to locate issues
easier.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When consolidating GPIO lookups in ACPI code, the debug messaging
had been reworked that the user may see
[ 13.401147] (NULL device *): using ACPI '\_SB.LEDS.led-0' for '(null)' GPIO lookup
[ 13.401378] gpio gpiochip0: Persistence not supported for GPIO 40
[ 13.401402] gpio-40 (?): no flags found for (null)
instead of
[ 14.182962] gpio gpiochip0: Persistence not supported for GPIO 40
[ 14.182994] gpio-40 (?): no flags found for gpios
The '(null)' parts are less informative and likely scare the users.
Replace them by '(default)' which can point out to the default connection
IDs, such as 'gpios'.
While at it, amend other places where con_id is used in the messages.
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Fixes: 8eb1f71e7a ("gpiolib: consolidate GPIO lookups")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to repeat for-loop twice in the error path in
gpiochip_add_data_with_key(). Deduplicate it. While at it,
rename loop variable to be more specific and avoid ambguity.
It also properly unwinds the SRCU, i.e. in reversed order of allocating.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Hogs are added *after* ACPI so should be removed *before* in error path.
Fixes: a411e81e61 ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make acpi_gpio_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make of_gpio_get_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
While at it, rename to be of_gpio_count() to be aligned with the others.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This devm API takes a consumer device as an argument to setup the devm
action, but throws it away when calling further into gpiolib. This leads
to odd debug messages like this:
(NULL device *): using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Let's pass the consumer device down, by directly calling what
fwnode_gpiod_get_index() calls but pass the device used for devm. This
changes the message to look like this instead:
gpio-keys gpio-keys: using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Note that callers of fwnode_gpiod_get_index() will still see the NULL
device pointer debug message, but there's not much we can do about that
because the API doesn't take a struct device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 8eb1f71e7a ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With SRCU we can now correctly handle the situation when a GPIO provider
is removed while having users still holding references to GPIO
descriptors. Remove all warnings emitted in this situation.
Suggested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Similar to gpiochip_generic_request() and gpiochip_generic_free() the
gpiochip_generic_config() function needs to handle the case where there
are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges
device tree property.
Commit f34fd6ee1b ("gpio: dwapb: Use generic request, free and
set_config") set the .set_config callback to gpiochip_generic_config()
in the dwapb GPIO driver so the GPIO API can set pinctrl configuration
for the corresponding pins. Most boards using the dwapb driver do not
set the gpio-ranges device tree property though, and in this case
gpiochip_generic_config() would return -EPROPE_DEFER rather than the
previous -ENOTSUPP return value. This in turn makes
gpio_set_config_with_argument_optional() fail and propagate the error to
any driver requesting GPIOs.
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The opaque pointer "data" in each match function used by
gpio_device_find() is a pointer to const, thus the same argument passed
to gpio_device_find() can adjusted similarly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are two legacy, deprecated functions - gpiod_to_chip() and
gpio_device_get_chip() - that still have users in tree. They return the
address of the SRCU-protected chip outside of the read-only critical
sections. They are inherently dangerous and the users should convert to
safer alternatives. Let's explicitly silence lockdep warnings by using
rcu_dereference_check(ptr, 1). While at it: reuse
gpio_device_get_chip() in gpiod_to_chip().
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Lockdep with CONFIG_PROVE_RCU enabled reports false positives about
suspicious rcu_dereference() usage. Let's silence it by using
srcu_dereference() which is the correct helper with SRCU.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
gpiod_hog() may be called without the gpio_device SRCU read lock taken
so we need to do it here as well. It's alright if someone else is
already holding the lock as SRCU read critical sections can be nested.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
In certain situations we may end up taking the GPIO descriptor SRCU read
lock in of_gpiochip_add() before the SRCU struct is initialized. Move
the initialization before the call to of_gpiochip_add().
Fixes: be711caa87 ("gpio: add SRCU infrastructure to struct gpio_desc")
Fixes: 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122228.e607a080-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We still have some functions that return the address of the GPIO chip
associated with the GPIO device. This is dangerous and the users should
find a better solution. Let's add appropriate comments to the kernel
docs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With all accesses to gdev->chip being protected with SRCU, we can now
remove the RW-semaphore specific to the character device which
fulfilled the same role up to this point.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Ensure we cannot crash if the GPIO device gets unregistered (and the
chip pointer set to NULL) during any of the API calls.
To that end: wait for all users of gdev->chip to exit their read-only
SRCU critical sections in gpiochip_remove().
For brevity: add a guard class which can be instantiated at the top of
every function requiring read-only access to the chip pointer and use it
in all API calls taking a GPIO descriptor as argument. In places where
we only deal with the GPIO device - use regular guard() helpers and
rcu_dereference() for chip access. Do the same in API calls taking a
const pointer to gpio_desc.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add the SRCU struct to GPIO device. It will be used to serialize access
to the GPIO chip pointer. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Duplicating the can_sleep value in GPIO device will allow us to not
needlessly dereference the chip pointer in several places and reduce the
number of SRCU read-only critical sections.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need to check the gdev pointer in struct gpio_desc - it's
always assigned and never cleared. It's also pointless to check
gdev->chip before we actually serialize access to it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Checking desc->gdev->chip for NULL without holding it in place with some
serializing mechanism is pointless. Remove this check. Also don't check
desc->gdev for NULL as it can never happen. We'll be protecting
gdev->chip with SRCU soon but we will provide a dedicated, automatic
class for that.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need to dereference gdev->chip in gpiochip_setup_dev() as at
the time it's called, the label in the associated struct gpio_device is
already set.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We now removed the gpio_lock spinlock and modified the places
previously protected by it to handle desc->flags access in a consistent
way. Let's improve other places that were previously unprotected by
reading the flags field of gpio_desc once and using the stored value for
logic consistency. If we need to modify the field, let's also write it
back once with a consistent value resulting from the function's logic.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The "multi-function" gpio_lock is pretty much useless with how it's used
in GPIOLIB currently. Because many GPIO API calls can be called from all
contexts but may also call into sleeping driver callbacks, there are
many places with utterly broken workarounds like yielding the lock to
call a possibly sleeping function and then re-acquiring it again without
taking into account that the protected state may have changed.
It was also used to protect several unrelated things: like individual
descriptors AND the GPIO device list. We now serialize access to these
two with SRCU and so can finally remove the spinlock.
There is of course the question of consistency of lockless access to
GPIO descriptors. Because we only support exclusive access to GPIOs
(officially anyway, I'm looking at you broken
GPIOD_FLAGS_BIT_NONEXCLUSIVE bit...) and the API contract with providers
does not guarantee serialization, it's enough to ensure we cannot
accidentally dereference an invalid pointer and that the state we present
to both users and providers remains consistent. To achieve that: read the
flags field atomically except for a few special cases. Read their current
value before executing callback code and use this value for any subsequent
logic. Modifying the flags depends on the particular use-case and can
differ. For instance: when requesting a GPIO, we need to set the
REQUESTED bit immediately so that the next user trying to request the
same line sees -EBUSY.
While at it: the allocations that used GFP_ATOMIC until this point can
now switch to GFP_KERNEL.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With the list of GPIO devices now protected with SRCU we can use
gpio_device_find() to traverse it from sysfs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In order to ensure that the label is not freed while it's being
accessed, let's protect it with SRCU and synchronize it everytime it's
changed.
Let's modify desc_set_label() to manage the memory used for the label as
it can only be freed once synchronize_srcu() returns.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Extend the GPIO descriptor with an SRCU structure in order to serialize
the access to the label. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We will soon serialize access to the descriptor label using SRCU. The
write-side of the protection will require calling synchronize_srcu()
which must not be called from atomic context. We have two irq helpers:
gpiochip_lock_as_irq() and gpiochip_unlock_as_irq() that set the label
if the GPIO is not requested but is being used as interrupt. They are
called with a spinlock held from the interrupt subsystem.
They must not do it if we are to use SRCU so instead let's move the
special corner case to a dedicated getter.
Don't actually set the label to "interrupt" in the above case but rather
use the newly added gpiod_get_label() helper to hide the logic that
atomically checks the descriptor flags and returns the address of a
static "interrupt" string.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We will soon serialize access to the descriptor label using SRCU. The
write-side of the protection will require calling synchronize_srcu()
which must not be called from atomic context. We have two irq helpers:
gpiochip_lock_as_irq() and gpiochip_unlock_as_irq() that set the label
if the GPIO is not requested but is being used as interrupt. They are
called with a spinlock held from the interrupt subsystem.
They must not do it if we are to use SRCU so instead let's move the
special corner case to a dedicated getter.
First: let's implement and use the getter where it's applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The device nodes representing GPIO hogs cannot be deleted without
unregistering the GPIO chip so there's no need to serialize their access.
However we must ensure that users can get the right address so write and
read it atomically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We're working towards removing the "multi-function" GPIO spinlock that's
implemented terribly wrong. We tried using an RW-semaphore to protect
the list of GPIO devices but it turned out that we still have old code
using legacy GPIO calls that need to translate the global GPIO number to
the address of the associated descriptor and - to that end - traverse
the list while holding the lock. If we change the spinlock to a sleeping
lock then we'll end up with "scheduling while atomic" bugs.
Let's allow lockless traversal of the list using SRCU and only use the
mutex when modyfing the list.
While at it: let's protect the period between when we start the lookup
and when we finally request the descriptor (increasing the reference
count of the GPIO device) with the SRCU read lock.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The match function used in gpio_device_find() should not modify the
contents of passed opaque pointer, because such modification would not
be necessary for actual matching and it could lead to quite unreadable,
spaghetti code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: fix coding style in header]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXJK4UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHsYH/jKmzKXDRsBCcw/Q
HGUvFtpohWBOpN6efdf0nxilQisuyQrqKB9fnwvfcdE60VpqMJXFMdlFh/fonxPl
JMbpk9y5uw48IJZA43NwTxUrjZ4wyWzv4ZF6YWa+5WdTAJpPLEPhhnLxcHOKklMr
5Cm/7B/M7eB2BXBfc45b1pkKN22q9OXvjaKxZ+5wYmiMxS+GC8l8jiJ/WlHX78PR
eLgsa1v732f2D7YF75wVhaoYepR+QzA9wTKqhjMNCEaVc2PQhA2JRsBXEt84qEIa
FZigmf7LLc4ed9YA2XjRBZhAehe3cZVJZ1lasW37IATS921La2WfKuiysICJOtyT
bGjK8tk=
=Pt7W
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rc4' into gpio/for-next
Linux 6.8-rc4
Pulling this for a bugfix upstream with which the gpio/for-next branch
conflicts.
It's useful to have the device type information for those sub-devices
that are actually GPIO chips registered with GPIOLIB. While at it: use
the device type struct to setup the release callback which is the
preferred way to use the device API.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 48e1b4d369 ("gpiolib: remove the GPIO device from the list
when it's unregistered") we remove the GPIO device entry from the global
list (used to order devices by their GPIO ranges) when unregistering the
chip, not when releasing the device. It will not happen when the last
reference is put anymore. This means, we need to remove it in error path
in gpiochip_add_data_with_key() unconditionally, without checking if the
device's .release() callback is set.
Fixes: 48e1b4d369 ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that the driver core can properly handle constant struct bus_type,
move the gpio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no external users for the irq domain helpers so unexport them
and remove the prototypes from the driver header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commits 1979a28075 ("gpiolib: replace the GPIO device
mutex with a read-write semaphore") and 65a828bab1 ("gpiolib: use
a mutex to protect the list of GPIO devices").
Unfortunately the legacy GPIO API that's still used in older code has to
translate numbers from the global GPIO numberspace to descriptors. This
results in a GPIO device lookup in every call to legacy functions. Some
of those functions - like gpio_set/get_value() - can be called from
atomic context so taking a sleeping lock that is an RW semaphore results
in an error.
We'll probably have to protect this list with SRCU.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/f7b5ff1e-8f34-4d98-a7be-b826cb897dc8@moroto.mountain/
Fixes: 1979a28075 ("gpiolib: replace the GPIO device mutex with a read-write semaphore")
Fixes: 65a828bab1 ("gpiolib: use a mutex to protect the list of GPIO devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are only two spots where we modify (add to or remove objects from)
the GPIO device list. Readers should be able to access it concurrently.
Replace the mutex with a read-write semaphore and adjust the locking
operations accordingly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
If we wait until the GPIO device's .release() callback gets invoked
before we remove it from the global device list, then we risk that
someone will look it up using gpio_device_find() between where we
dropped the last reference and before .release() is done taking a
reference again to an object that's being released.
The device must be removed when it's being unregistered - just like how
we remove it from the GPIO bus.
Fixes: ff2b135922 ("gpio: make the gpiochip a real device")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Older code has an annoying habit of putting tabs between the type and the
name of the variable. This doesn't really add to readability and newer
code doesn't do it so make the entire file consistent.
While at it: convert 'unsigned' to 'unsigned int'.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
extra_checks is only used in a few places. It also depends on
a non-standard DEBUG define one needs to add to the source file. The
overhead of removing it should be minimal (we already use pure
might_sleep() in the code anyway) so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
cdev is the only user of the debounce_period_us field in
struct gpio_desc, and it no longer uses it, so remove it.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The global list of GPIO devices is never modified or accessed from
atomic context so it's fine to protect it using a mutex. Add a new
global lock dedicated to the gpio_devices list and use it whenever
accessing or modifying it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Rename two functions that read or modify the global GPIO device list but
don't take the lock themselves (and need to be called with it already
acquired). Use the _unlocked() suffix which seems to be used quite
consistently across the kernel despite there also existing the _locked()
suffix for the same purpose.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We will eventually switch to protecting the GPIO descriptors with a mutex
but until then, we need to allocate memory for the label copy atomically
while we're holding the global spinlock.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/62588146-eed6-42f7-ba26-160226b109fe@moroto.mountain/T/#u
Fixes: f8d05e276b ("gpiolib: remove gpiochip_is_requested()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
- provide a safer alternative to gpiochip_is_requested()
- convert all existing users
- remove gpiochip_is_requested()
-----BEGIN PGP SIGNATURE-----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=PlCm
-----END PGP SIGNATURE-----
Merge tag 'gpio-remove-gpiochip_is_requested-for-v6.8-rc1' into gpio/for-next
gpio: remove gpiochip_is_requested()
- provide a safer alternative to gpiochip_is_requested()
- convert all existing users
- remove gpiochip_is_requested()
We have no external users of gpiochip_is_requested(). Let's remove it
and replace its internal calls with direct testing of the REQUESTED flag.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_is_requested() not only has a misleading name but it returns
a pointer to a string that is freed when the descriptor is released.
Provide a new helper meant to replace it, which returns a copy of the
label string instead.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Provide a getter for the GPIO device label string so that users don't
have to dereference struct gpio_chip directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that pinctrl_gpio_set_config() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
