Added zynqmp_pm_invoke_fw_fn() to use new SMC format in which
lower 12 bits of SMC id are fixed and firmware header is moved to
subsequent SMC arguments. The new SMC format supports full request and
response buffers.
Added zynqmp_pm_get_sip_svc_version() to get SiP SVC version
number to check if TF-A is newer or older and use the SMC format
accordingly to handle backward compatibility.
Used new SMC format for PM_QUERY_DATA API as more response values are
required in it.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20240920055501.2658642-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
As per the current code base, feature check API is used to check the
version in zynqmp_pm_pinctrl_set_config() before requesting the
firmware, and if the expected version is not found then it will
return an error. So now when the latest kernel tries to access the
tri-state functionality with older firmware, observe failure prints
during booting.
The failure prints,
[ 1.204850] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin 37 param 2 value 0
[ 2.699455] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin 44 param 2 value 0
[ 2.708424] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin 46 param 2 value 0
[ 2.717387] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: failed to set: pin 48 param 2 value 0
Now, these error prints mislead the user whether it is an actual
failure or the feature itself is not there in the firmware. So, just
to avoid confusion around this, add some debug prints before
returning an error code. With that, it is easier to know whether it is
an actual failure or the feature is unsupported.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Link: https://lore.kernel.org/r/20240920055410.2658465-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Refactors the reset handling mechanisms by replacing the reset ID's
enum type with a u32. This update improves flexibility, allowing the
reset ID to accommodate a broader range of values, including those
that may not fit into predefined enum values.
The use of u32 for reset ID enhances extensibility, especially for
hardware platforms or features where more granular control of reset
operations is required. By shifting to a general integer type, this
change reduces constraints and simplifies integration with other
system components that rely on non-enum-based reset IDs.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Link: https://lore.kernel.org/r/20240830100042.3163511-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add missing PM EEMI APIs interface in debug firmware driver.
The debugfs firmware driver interface is intended for testing and
debugging the EEMI APIs only. This interface does not contain any
checking regarding improper usage, and the number, type and valid
ranges of the arguments. This interface must be used with a lot of
care. In fact, accessing this interface during normal PM operation
will very likely cause unexpected problems.
The debugfs interface shouldn't be used in the production system and
hence it is disabled by default in defconfig.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240730084342.1683231-1-ronak.jain@amd.com
On coreboot platforms, a system framebuffer may be provided to the Linux
kernel by filling a LB_TAG_FRAMEBUFFER entry in the coreboot table. But
a coreboot payload (e.g: SeaBIOS) could also provide its own framebuffer
information to the Linux kernel.
If that's the case, arch x86 boot code will fill the global screen_info
data and this used by the Generic System Framebuffers (sysfb) framework,
to register a platform device with pdata about the system's framebuffer.
But later, the framebuffer_coreboot driver will try to do the same and
attempt to register a "simple-framebuffer" platform device (using the
information from the coreboot table), which will lead to an error due a
device with the same name already being registered:
sysfs: cannot create duplicate filename '/bus/platform/devices/simple-framebuffer.0'
...
coreboot: could not register framebuffer
framebuffer coreboot8: probe with driver framebuffer failed with error -17
To prevent this issue, make the framebuffer_core driver to not register
a platform device if the global struct screen_info data has been filled.
Reported-by: Brian Norris <briannorris@chromium.org>
Closes: https://lore.kernel.org/all/ZuCG-DggNThuF4pj@b20ea791c01f/T/#ma7fb65acbc1a56042258adac910992bb225a20d2
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Link: https://lore.kernel.org/r/20240916110040.1688511-3-javierm@redhat.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
That can be used by drivers to check if the Generic System Framebuffers
(sysfb) support can handle the data contained in the global screen_info.
Drivers might need this information to know if have to setup the system
framebuffer, or if they have to delegate this action to sysfb instead.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20240916110040.1688511-2-javierm@redhat.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Prevent kexec from crashing on a corrupted TPM log by using a memory
type that is reserved by default
- Log correctable errors reported via CPER
- A couple of cosmetic fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZvVoMgAKCRAwbglWLn0t
XLMLAP4gov3sDh6kIgDe5dxNghVl1EZURgyt/KViRDNyxZmAQQD+I1bgkiczO8bh
+S6AXE4rCZNLE/3JtxJGtfSI0et51AQ=
=2NGd
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Not a lot happening in EFI land this cycle.
- Prevent kexec from crashing on a corrupted TPM log by using a
memory type that is reserved by default
- Log correctable errors reported via CPER
- A couple of cosmetic fixes"
* tag 'efi-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Remove redundant null pointer checks in efi_debugfs_init()
efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption
efi/cper: Print correctable AER information
efi: Remove unused declaration efi_initialize_iomem_resources()
Several new features here:
virtio-balloon supports new stats
vdpa supports setting mac address
vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
virtio_fs supports new sysfs entries for queue info
virtio/vsock performance has been improved
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbz7ykPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkk8H/A3vMRYXBzne9anezZLvADKS/CpX7v0DFEVj
VfSMWXvYdUariYDyyb7pZsvK5QR22pE0pIaW6Kcgv9fNwq27M/H6g6NJk5ny8a7d
216AQs1J28pXPPY+q03fhf3SzE3yHP8aeD9lyiO9QJYfs9vjtoyZeBGt3a4IUSX4
ZeNBAx8xWTBcEDIIcZLdY1DNDTbZ4+qQ12Ln9IKq7D4xkE6l7Xh+HGdgTWTnDZ8P
qEUUOmJTFKTQdOiVuU4NN3wzgHKWHdwKg0uWXo7ereYr3kYe3q//jCcLMv88a1x0
XP7NRBQg/rsErwTMdLz6ffyqXJs6lGGqNXzRfZKEwAvmnh/+zs4=
=gNBq
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-balloon supports new stats
- vdpa supports setting mac address
- vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
- virtio_fs supports new sysfs entries for queue info
- virtio/vsock performance has been improved
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vsock/virtio: avoid queuing packets when intermediate queue is empty
vsock/virtio: refactor virtio_transport_send_pkt_work
fw_cfg: Constify struct kobj_type
vdpa/mlx5: Postpone MR deletion
vdpa/mlx5: Introduce init/destroy for MR resources
vdpa/mlx5: Rename mr_mtx -> lock
vdpa/mlx5: Extract mr members in own resource struct
vdpa/mlx5: Rename function
vdpa/mlx5: Delete direct MKEYs in parallel
vdpa/mlx5: Create direct MKEYs in parallel
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
virtio_fs: add sysfs entries for queue information
virtio_fs: introduce virtio_fs_put_locked helper
vdpa: Remove unused declarations
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
vdpa/mlx5: Small improvement for change_num_qps()
vdpa/mlx5: Keep notifiers during suspend but ignore
vdpa/mlx5: Parallelize device resume
vdpa/mlx5: Parallelize device suspend
vdpa/mlx5: Use async API for vq modify commands
...
The sysfb framebuffer handling only operates on graphics devices
that provide the system's firmware framebuffer. If that device is
not known, assume that any graphics device has been initialized by
firmware.
Fixes a problem on i915 where sysfb does not release the firmware
framebuffer after the native graphics driver loaded.
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/dri-devel/SJ1PR11MB6129EFB8CE63D1EF6D932F94B96F2@SJ1PR11MB6129.namprd11.prod.outlook.com/
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12160
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b49420d6a1 ("video/aperture: optionally match the device in sysfb_disable()")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org> # v6.11+
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924084227.262271-1-tzimmermann@suse.de
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and this can increase over all security.
```
[Before]
text data bss dec hex filename
5974 1008 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
[After]
text data bss dec hex filename
6038 944 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Message-Id: <20240904011743.2010319-1-lihongbo22@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
ACPI:
* Enable PMCG erratum workaround for HiSilicon HIP10 and 11 platforms.
* Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
* Enable workaround for hardware access/dirty issue on Ampere-1A cores.
Memory management:
* Define PHYSMEM_END to fix a crash in the amdgpu driver.
* Avoid tripping over invalid kernel mappings on the kexec() path.
* Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
* Add support for the "fixed instruction counter" extension in the CPU
PMU architecture.
* Extend and fix the event encodings for Apple's M1 CPU PMU.
* Allow LSM hooks to decide on SPE permissions for physical profiling.
* Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
* Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
* Fix vector length issues in the SVE/SME sigreturn tests
* Fix build warning in the ptrace tests.
Timers:
* Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
* Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
* Minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmbkVNEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKeIB/9YtbN7JMgsXktM94GP03r3tlFF36Y1S51S
+zdDZclAVZCTCZN+PaFeAZ/+ah2EQYrY6rtDoHUSEMQdF9kH+ycuIPDTwaJ4Qkam
QKXMpAgtY/4yf2rX4lhDF8rEvkhLDsu7oGDhqUZQsA33GrMBHfgA3oqpYwlVjvGq
gkm7olTo9LdWAxkPpnjGrjB6Mv5Dq8dJRhW+0Q5AntI5zx3RdYGJZA9GUSzyYCCt
FIYOtMmWPkQ0kKxIVxOxAOm/ubhfyCs2sjSfkaa3vtvtt+Yjye1Xd81rFciIbPgP
QlK/Mes2kBZmjhkeus8guLI5Vi7tx3DQMkNqLXkHAAzOoC4oConE
=6osL
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant, and using IS_ERR is
safe enough.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic.
Cc: <stable@vger.kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match
the binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure
application firmware driver
-----BEGIN PGP SIGNATURE-----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=Waa0
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
-----BEGIN PGP SIGNATURE-----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=hZ0b
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6GV4
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This resolves a deadlock in the Qualcomm uefisecapp driver following the
attempt to acquire global context is acquired in the case the device
isn't probed.
-----BEGIN PGP SIGNATURE-----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=HJYI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rJbm
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One more Qualcomm driver fix for v6.11
This resolves a deadlock in the Qualcomm uefisecapp driver following the
attempt to acquire global context is acquired in the case the device
isn't probed.
* tag 'qcom-drivers-fixes-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
Link: https://lore.kernel.org/r/20240904145214.4089-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmbR0NUACgkQ3SOs138+
s6Evng/+K0MSYAKl6BlO2jVBReatt23DNPimrV6MNEUmjSvBvR7CLgyTvRqZpXCG
NGhcvzlRkSKhxy+jy1dvzrhmL2DGoryENdjD08dU7GxGYesoM4wRO73P36Youyvp
1FXrZ0cWc9VdhHCLUiTSQfhGM5epkRi4DGVZ7pb/dUeEcVBPDhSa/Ou1TlEI3or2
vzmKVREaqvDDX0SQCWFwpwF8+FoRAz96Bg6tCUyPFAjsD9fPNUB8jPgMokSy/x8c
XJLd48iweQlZZVVKWysbPzL26A340iT/WpXL09D5NhnG0ucuLhSM5q9PEqNlRH0h
tIJq6gKI4oO1EDq2NxHtGkAvbJZt9DZ3CTRqAKQ29MKzLNZGNrG/MP0EeqSuM5T/
000T/ff8eU5YlIl2DY0znW2kt6Fes5tR9zbn+BHNm5cXW/xJgso/mncPEc6V4wDg
lntV1TpSaY1qtJjlH03rTpL8gJb4inkdhf6kv2LENlTiapT/P+K34rwg0xJz+Mbg
jiW8/QIMji44EF8E3PZmt9mqgr0CK7mMWGhk/GcmTDDnm0Zc95ZBhq8dcQkJj3D1
A3maDFvSC/ryDc/25XMlsbXY7ZWa+s8u5eysVwToqdQpJ1im0M/iAT3du6a1GY02
xZiJzQMbC0GVmvCQdN2jRP+GjYUH5L6eIujPFKC5v/RqWQ1/oHU=
=pomi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aNb0
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.12-rc1
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
* tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Use scoped device node handling to simplify error paths
firmware: tegra: bpmp: Drop unused mbox_client_to_bpmp()
Link: https://lore.kernel.org/r/20240830141004.3195210-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----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=fUHS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=28qZ
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
-----BEGIN PGP SIGNATURE-----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=BpAd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/d2i
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.12
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
* tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fetch the Rx/Tx buffer size using ffa_features()
firmware: arm_ffa: Add support for FFA_YIELD in direct messaging
firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2
firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS
firmware: arm_ffa: Move the function ffa_features() earlier
firmware: arm_ffa: Update the FF-A command list with v1.2 additions
firmware: arm_ffa: Some coding style fixes
Link: https://lore.kernel.org/r/20240830135759.2383431-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use devm_mutex_init() instead of mutex_init(), to properly call
mutex_destroy() on probe failure / driver unbind.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-13-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use dev_err_probe() where possible in the driver's .probe() method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-11-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use devm resource management for driver's mailbox. This allows us to get
rid of the driver's .remove() method and the gotos in .probe().
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-10-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simplify debugfs code: do not check for errors, as debugfs errors should
be ignored, and use devm action for dropping the debugfs directory.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-9-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to create attribute files in /sys/firmware/turris-mox-rwtm,
this driver creates it's own kobject type.
Simplify this by dropping this own kobject creation, and instead
creating standard device attribute files.
For backwards compatibility with sysfs ABI, create a symlink
/sys/firmware/turris-mox-rwtm, pointing to this device's sysfs
directory.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-8-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop including of.h, include several other headers that are used but not
included directly.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-6-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hide signature generation related constants behind macros instead of
hardcoding the values.
Use SHA512_DIGEST_SIZE from crypto/sha2.h instead of hardcoded 64 as the
message size.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the boolean type for has_board_info, has_pubkey and last_sig_done
members of the driver's private structure.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the ETH_ALEN macro instead of hardcoded 6 for MAC address length.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 4096 bytes limit in mox_hwrng_read() is due to the DMA buffer being
allocated to one PAGE_SIZE bytes. Use new local macro constant
RWTM_DMA_BUFFER_SIZE at allocation time and when used in mox_hwrng_read().
Use SZ_4K instead of PAGE_SIZE. Although PAGE_SIZE is never set to a
larger value on Armada 3720, it theoretically could, and this would be a
waste of space.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make accept_memory() and range_contains_unaccepted_memory() take 'start'
and 'size' arguments instead of 'start' and 'end'.
Remove accept_page(), replacing it with direct calls to accept_memory().
The accept_page() name is going to be used for a different function.
Link: https://lkml.kernel.org/r/20240809114854.3745464-6-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the
newly added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well
as runtime problems in the tzmem and scm firmware, the USB Type-C
driver, and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is proportional
to the number of supported machines. This includes both warning fixes
and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms,
as well as a single fix for a 32-bit i.MX6 based board.
The other changes are the usual minor changes, including an update to the
MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v).
-----BEGIN PGP SIGNATURE-----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=tK5m
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
If the __qcuefi pointer is not set, then in the original code, we would
hold onto the lock. That means that if we tried to set it later, then
it would cause a deadlock. Drop the lock on the error path. That's
what all the callers are expecting.
Fixes: 759e7a2b62 ("firmware: Add support for Qualcomm UEFI Secure Application")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/19829bc4-1b6f-47f7-847a-e90c25749e40@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64 will soon require its own callback to initialise services
that are only available on this architecture. Introduce a hook
that can be overloaded by the architecture.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZtCKzwAKCRAnX84Zoj2+
drMcAYDvGyENhD3jcOSM0vd1pEgleMSKoD4sbsj+JO6vMona7/dWzpUXHyxZg0P9
7gOZAkwBgMQHQKWBOga/LnloJi1/GC4Y7pjR4tDzLRO4ejbGdStLK8vEMKJKltwB
ej1UUueBAQ==
=4GlG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-08-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
The i.MX95 System manager exports SCMI MISC protocol for linux to do
various settings, such as set board gpio expander as wakeup source.
The driver is to add the support.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
i.MX95 System Manager(SM) firmware includes a SCMI vendor protocol, SCMI
MISC protocol which includes controls that are misc settings/actions that
must be exposed from the SM to agents. They are device specific and are
usually define to access bit fields in various mix block control modules,
IOMUX_GPR, and other General Purpose registers, Control Status Registers
owned by the SM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-3-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
i.MX95 has a battery-backed module(BBM), which has persistent storage
(GPR), an RTC, and the ON/OFF button. The System Manager(SM) firmware
use SCMI vendor protocol(SCMI BBM) to let agent be able to use GPR, RTC
and ON/OFF button.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-2-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
-----BEGIN PGP SIGNATURE-----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=Zo90
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pkFq
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Replace the typo comma with the semicolon. No functional change.
Message-Id: <20240827143838.1465913-4-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use __free for device_node values, and thus drop calls to of_node_put.
The goal is simplify of_node reference cleanup by using this scope-based
of_node_put() cleanup to simplify function exit handling. When using __free
a resource is allocated within a block, it is automatically freed at the
end of the block.
This cleanup aligns well with the recent change in shmem.c to use __free
instead of explicit of_node_put() calls.
Message-Id: <20240827143838.1465913-3-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently, cper_print_pcie() only logs Uncorrectable Error Status, Mask
and Severity registers along with the TLP header.
If a correctable error is received immediately preceding or following an
Uncorrectable Fatal Error, its information is lost since Correctable
Error Status and Mask registers are not logged.
As such, to avoid skipping any possible error information, Correctable
Error Status and Mask registers should also be logged.
Additionally, ensure that AER information is also available through
cper_print_pcie() for Correctable and Uncorrectable Non-Fatal Errors.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The Pixel 3a returns 4291821499 (-3145797 or 0xFFCFFFBB) when attempting
to load the GPU firmware if tzmem is allowed. Disable it on SDM670 so
the GPU can successfully probe.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240730013834.41840-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
An endpoint can discover the minimum size, maximum size and alignment
boundary for the Rx/Tx buffers by passing the function ID of the
FFA_RXTX_MAP ABI as input in the FFA_FEATURES interface. The maximum
size is an optional field and a value of 0 means that the partition
manager or the hypervisor does not enforce a maximum size.
Use the discovery mechanism and remove the hardcoded 4kB buffer size.
If the discovery fails, it still defaults to 4kB.
Message-Id: <20240820-ffa_v1-2-v2-7-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Successful completion of both direct messaging function can be indicated
through an invocation of FFA_YIELD or GGA_INTERRUPT by the callee.
FFA_INTERRUPT indicates that the direct request was interrupted and must
be resumed through the FFA_RUN interface which is already done in the
driver.
FFA_YIELD indicates that the receiver endpoint has transitioned to the
blocked runtime state and must be resumed through the FFA_RUN interface.
However, the way receiver endpoint gets unblocked is implementation
defined. So, the driver just sleeps for 1 - 2ms and issues FFA_RUN. It
can return to the caller with FFA_YIELD is the receiver endpoint is still
blocked.
Message-Id: <20240820-ffa_v1-2-v2-6-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FFA_MSG_SEND_DIRECT_{REQ,RESP} supported only x3-x7 to pass implementation
defined values as part of the message. This may not be sufficient sometimes
and also it would be good to use all the registers supported by SMCCC v1.2
(x0-x17) for such register based communication.
Also another limitation with the FFA_MSG_SEND_DIRECT_{REQ,RESP} is the
ability to target a specific service within the partition based on it's
UUID.
In order to address both of the above limitation, FF-A v1.2 introduced
FFA_MSG_SEND_DIRECT_{REQ,RESP}2 which has the ability to target the
message to a specific service based on its UUID within a partition as
well as utilise all the available registers(x4-x17 specifically) for
the communication.
This change adds support for FFA_MSG_SEND_DIRECT_REQ2 and
FFA_MSG_SEND_DIRECT_RESP2.
Message-Id: <20240820-ffa_v1-2-v2-5-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FF-A v1.2 introduced FFA_PARTITION_INFO_GET_REGS which is similar to
FFA_PARTITION_INFO_GET except that the former uses the registers to
get the required information instead of the Rx buffer which the latter
uses.
We need to first check if the platform supports this new API using
FFA_FEATURES so that we can fallback to the FFA_PARTITION_INFO_GET
(which is mandatory) if FFA_PARTITION_INFO_GET_REGS is not implemented.
Message-Id: <20240820-ffa_v1-2-v2-4-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We need to use ffa_features() in ffa_partition_probe() to detect if
the newer FFA_PARTITION_INFO_GET_REGS API is supported in the platform
or not. To avoid unnecessary forward declaration within the file, let
us just move this ffa_features() earlier.
No funtional change.
Message-Id: <20240820-ffa_v1-2-v2-3-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arm Firmware Framework for A-profile(FFA) v1.2 introduces register based
discovery mechanism and direct messaging extensions that enables to target
specific UUID within a partition.
Let us add all the newly supported FF-A function IDs in the spec.
Also update to the error values and associated handling.
Message-Id: <20240820-ffa_v1-2-v2-2-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
These changes fixes a set of below coding style issues:
1. spaces required around that '=' (ctx:VxW)
2. possible unnecessary 'out of memory' message
3. unnecessary for single statement blocks
Message-Id: <20240820-ffa_v1-2-v2-1-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Override default maximum RX timeout with the value picked from the
devicetree, when provided.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The descriptor structure scmi_desc contains a variety of fields related to
the transport functionalities and it is defined by the transport drivers
themselves; such elements, though, serve varied purposes and have different
lifetime.
In particular, while there are some of those elements that provide a
description of transport features that are supposed to be immutable, on
the other side there are present also some other characteristics that are
instead supposed to be configurable on a per-platform base since they
represent configuration features tied to the specific hardware/firmware
system.
The immutable fields are already qualified as const on the their own; get
rid of the structure-level const qualifier which is not needed, so as to
enable possible runtime customization of the mutable configuration
features.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240816151407.155034-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A few protocol versions had been increased with SCMI v3.2.
Update accordingly the supported version define in the kernel stack,
since all the mandatory base commands are indeed already supported.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812174027.3931160-1-cristian.marussi@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Since all SCMI transports have been made standalone drivers, remove all the
core SCMI stack legacy support that was needed to run transports as built
into the stack.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-10-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make SCMI VirtIO transport a standalone driver that can be optionally
loaded as a module.
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Igor Skalkin <igor.skalkin@opensynergy.com>
CC: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-9-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make SCMI OPTEE transport a standalone driver that can be optionally
loaded as a module.
CC: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-8-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make SCMI SMC transport a standalone driver that can be optionally
loaded as a module.
CC: Peng Fan <peng.fan@nxp.com>
CC: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-7-cristian.marussi@arm.com>
[sudeep.holla: moved Clang Thumb2 build fix to the new makefile]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, scm driver only supports full dump when download
mode is selected. Add support to enable minidump as well as
enable it along with fulldump.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240715155655.1811178-2-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently on Qualcomm SoC, download_mode is enabled if
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is selected or
passed a boolean value from command line.
Refactor the code such that it supports multiple download
modes and drop CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT config
instead, give interface to set the download mode from
module parameter while being backword compatible at the
same time.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240715155655.1811178-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We currently only correctly convert the virtual address passed by the
caller to qcom_tzmem_to_phys() if it corresponds to the base address of
the chunk. If the user wants to convert some pointer at an offset
relative to that base address, we'll return 0. Let's change the
implementation of qcom_tzmem_to_phys(): iterate over the chunks and try
to call gen_pool_virt_to_phys() just-in-time instead of trying to call
it only once when creating the chunk.
Fixes: 84f5a7b67b ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/20240729095542.21097-1-johan+linaro@kernel.org/
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240731-tzmem-efivars-fix-v2-1-f0e84071ec07@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently get_wq_ctx() is wrongly configured as a standard call. When two
SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to
resume the corresponding sleeping thread. But if get_wq_ctx() is
interrupted, goes to sleep and another SMC call is waiting to be allocated
a waitq context, it leads to a deadlock.
To avoid this get_wq_ctx() must be an atomic call and can't be a standard
SMC call. Hence mark get_wq_ctx() as a fast call.
Fixes: 6bf3259922 ("firmware: qcom: scm: Add wait-queue handling logic")
Cc: stable@vger.kernel.org
Signed-off-by: Murali Nalajala <quic_mnalajal@quicinc.com>
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240814223244.40081-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SDI is enabled for most of the Qualcomm SoCs and as per commit
ff4aa3bc98 ("firmware: qcom_scm: disable SDI if required")
it was recommended to disable SDI by mentioning it in device tree
to avoid hang during watchdog or during reboot.
However, for some cases if download mode tcsr register already
configured from boot firmware to collect dumps and if SDI is
disabled via means of mentioning it in device tree we could
still end up with dump collection. Disabling SDI alone is
not completely enough to disable dump mode and we also need to
zero out the bits download bits from tcsr register.
Current commit now, unconditionally call qcom_scm_set_download_mode()
based on download_mode flag, at max if TCSR register is not mentioned
or available for a SoC it will fallback to legacy way of setting
download mode through command which may be no-ops or return error
in case current firmware does not implements QCOM_SCM_INFO_IS_CALL_AVAIL
so, at worst it does nothing if it fails.
It also does to call SDI disable call if dload mode is disabled, which
looks fine to do as intention is to disable dump collection even if
system crashes.
Fixes: ff4aa3bc98 ("firmware: qcom_scm: disable SDI if required")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240708155332.4056479-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recent work on raspberry-power driver showed that even the
stacktrace on firmware property timeout doesn't provide
enough information. So add the first tag name to the warning
to be in line with a status error.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240728114200.75559-2-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Make SCMI mailbox transport a standalone driver that can be optionally
loaded as a module; while at it, create a dedicated subdirectory and
submenu for SCMI Transports.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-6-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Extend the core SCMI stack with structures and methods to allow for
transports to be split out as standalone drivers, while still supporting
old style transports, defined as built into the SCMI core stack.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-5-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Introduce a pair of structures initialized to contain all the existing
packet handling helpers, both for transports based on shared memory
and messages.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To get the address of shmem could be generalized by introducing
setup_shmem_iomap. Then the duplicated code in mailbox.c, optee.c
and smc.c could be dropped.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[ Cristian: use OF __free and make use of the new helper also in smc.c ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reset the reception buffer max size when a voltage domain description
request fails, for example when the voltage domain returns an access
permission error (SCMI_ERR_ACCESS) unless what only a single 32bit
word is read back for the remaining voltage description requests
responses leading to invalid information. The side effect of this
issue is that the voltage regulators registered from those remaining
SCMI voltage domain were assigned a wrong regulator name.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240725065317.3758165-1-etienne.carriere@foss.st.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
It is sometimes useful to reset all these SCMI communication debug
metrics especially when we are interested in analysing these metrics
during a particular workload or for a fixed time duration. Let us
add the capability to reset all these metrics as once so that they
can be counted during the period of interest.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-6-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Now that the basic support to collect the SCMI communication debug
metrics is in place, let us create debugfs files for the same so
that they are accessible to the users/debuggers.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-5-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the support for counting some of the SCMI communication debug metrics
like how many were sent successfully or with some errors, responses
received, notifications and delayed responses, transfer timeouts and
errors from the firmware/platform.
In many cases, the traces exists. But the traces are not always necessarily
enabled and getting such cumulative SCMI communication debug metrics helps
in understanding if there are any possible improvements that can be made
on either side of SCMI communication.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-4-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Since SCMI involves interaction with the entity(software, firmware and/or
hardware) providing services or features, it is quite useful to track
certain metrics(for pure debugging purposes) like how many messages were
sent or received, were there any failures, what kind of failures, ..etc.
Add a new optional config option for the above purpose and the initial
support for counting such key debug metrics.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-3-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Variable info is already defined in the outer code block and there is no
need to define the same again in the inner code block. Let us just remove
that duplicate definition of the variable info. No functional change.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Message-Id: <20240805131013.587016-2-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
-----BEGIN PGP SIGNATURE-----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=8sd2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
[ Missed the merge window because Russell forgot to push out ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
ARM: 9407/1: Add support for STACKLEAK gcc plugin
ARM: 9406/1: Fix callchain_trace() return value
ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
ARM: 9400/1: Remove unused struct 'mod_unwind_map'
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
* The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
* Support for HAVE_ARCH_STACKLEAK.
* The sv39 linear map has been extended to support 128GiB mappings.
* The frequency of the mtime CSR is now visible via hwprobe.
-----BEGIN PGP SIGNATURE-----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=zeUn
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
Add support for the stackleak feature. Whenever the kernel returns to user
space the kernel stack is filled with a poison value.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on qemu and milkv duo:
/ # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
[ 38.675575] lkdtm: Performing direct entry STACKLEAK_ERASING
[ 38.678448] lkdtm: stackleak stack usage:
[ 38.678448] high offset: 288 bytes
[ 38.678448] current: 496 bytes
[ 38.678448] lowest: 1328 bytes
[ 38.678448] tracked: 1328 bytes
[ 38.678448] untracked: 448 bytes
[ 38.678448] poisoned: 14312 bytes
[ 38.678448] low offset: 8 bytes
[ 38.689887] lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240623235316.2010-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Wipe screen_info after allocating it from the heap - used by arm32 and
EFI zboot, other EFI architectures allocate it statically
- Revert to allocating boot_params from the heap on x86 when entering
via the native PE entrypoint, to work around a regression on older
Dell hardware
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZqDiNgAKCRAwbglWLn0t
XBU/AQC1Qm7UFhBR6agbR1WMGcrmByR99t9bLNqOFHZxAJIvfQEAgCXcO3LpLfG5
SfCAZFIdwoK48Avdq2OBktz82JKXgQ8=
=ujzu
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Wipe screen_info after allocating it from the heap - used by arm32
and EFI zboot, other EFI architectures allocate it statically
- Revert to allocating boot_params from the heap on x86 when entering
via the native PE entrypoint, to work around a regression on older
Dell hardware
* tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Revert to heap allocated boot_params for PE entrypoint
efi/libstub: Zero initialize heap allocated struct screen_info
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
1, Define __ARCH_WANT_NEW_STAT in unistd.h;
2, Always enumerate MADT and setup logical-physical CPU mapping;
3, Add irq_work support via self IPIs;
4, Add RANDOMIZE_KSTACK_OFFSET support;
5, Add ARCH_HAS_PTE_DEVMAP support;
6, Add ARCH_HAS_DEBUG_VM_PGTABLE support;
7, Add writecombine support for DMW-based ioremap();
8, Add architectural preparation for CPUFreq;
9, Add ACPI standard hardware register based S3 support;
10, Add support for relocating the kernel with RELR relocation;
11, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=bla1
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Define __ARCH_WANT_NEW_STAT in unistd.h
- Always enumerate MADT and setup logical-physical CPU mapping
- Add irq_work support via self IPIs
- Add RANDOMIZE_KSTACK_OFFSET support
- Add ARCH_HAS_PTE_DEVMAP support
- Add ARCH_HAS_DEBUG_VM_PGTABLE support
- Add writecombine support for DMW-based ioremap()
- Add architectural preparation for CPUFreq
- Add ACPI standard hardware register based S3 support
- Add support for relocating the kernel with RELR relocation
- Some bug fixes and other small changes
* tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make the users of larch_insn_gen_break() constant
LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint
LoongArch: Use rustc option -Zdirect-access-external-data
LoongArch: Add support for relocating the kernel with RELR relocation
LoongArch: Remove a redundant checking in relocator
LoongArch: Use correct API to map cmdline in relocate_kernel()
LoongArch: Automatically disable KASLR for hibernation
LoongArch: Add ACPI standard hardware register based S3 support
LoongArch: Add architectural preparation for CPUFreq
LoongArch: Add writecombine support for DMW-based ioremap()
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
LoongArch: Add ARCH_HAS_PTE_DEVMAP support
LoongArch: Add RANDOMIZE_KSTACK_OFFSET support
LoongArch: Add irq_work support via self IPIs
LoongArch: Always enumerate MADT and setup logical-physical CPU mapping
LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h
* Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension.
* Zimop and Zcmop for may-be-operations.
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension.
* Zawrs,
* riscv,cpu-intc is now dtschema.
* A handful of performance improvements and cleanups to text patching.
* Support for memory hot{,un}plug
* The highest user-allocatable virtual address is now visible in
hwprobe.
-----BEGIN PGP SIGNATURE-----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=+ICi
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----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=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
This is a partial revert of commit
8117961d98f ("x86/efi: Disregard setup header of loaded image")
which triggers boot issues on older Dell laptops. As it turns out,
switching back to a heap allocation for the struct boot_params
constructed by the EFI stub works around this, even though it is unclear
why.
Cc: Christian Heusel <christian@heusel.eu>
Reported-by: <mavrix#kernel@simplelogin.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
After calling uefi interface allocate_pool to apply for memory, we
should clear 0 to prevent the possibility of using random values.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Cc: <stable@vger.kernel.org> # v6.6+
Fixes: 732ea9db9d ("efi: libstub: Move screen_info handling to common code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware on
x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE entrypoint
on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZpTg5gAKCRAwbglWLn0t
XOrOAQCpZjtjkPRPCBY+t3wUl84rOKiPr1SMHyL50Zl8udJKegD/bnwWSgX3FzLQ
TN+xjnK7IAxEoKAEWt8lnt04cH5r3As=
=7VWO
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Note the removal of the EFI fake memory map support - this is believed
to be unused and no longer worth supporting. However, we could easily
bring it back if needed.
With recent developments regarding confidential VMs and unaccepted
memory, combined with kexec, creating a known inaccurate view of the
firmware's memory map and handing it to the OS is a feature we can
live without, hence the removal. Alternatively, I could imagine making
this feature mutually exclusive with those confidential VM related
features, but let's try simply removing it first.
Summary:
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware
on x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE
entrypoint on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic"
* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
arm64/efistub: Clean up KASLR logic
x86/efistub: Drop redundant clearing of BSS
x86/efistub: Avoid returning EFI_SUCCESS on error
x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
x86/efistub: Enable SMBIOS protocol handling for x86
efistub/smbios: Simplify SMBIOS enumeration API
x86/efi: Drop support for fake EFI memory maps
The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are farily small maintenance
changes, either addressing minor mistakes or enabling additional hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and a
"shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a platform
driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some
code refactoring and new features.
-----BEGIN PGP SIGNATURE-----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=ChcR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
Initialize the completion before the mailbox channel is requested.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The wait_for_completion_timeout() function returns 0 if timed out, and a
positive value if completed. Fix the usage of this function.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Fixes: 2eab59cf0d ("firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Do not complete the "command done" completion if there are no waiters.
This can happen if a wait_for_completion() timed out or was interrupted.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too.
-----BEGIN PGP SIGNATURE-----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=xfjV
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too"
* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable Mute LED on HP 250 G7
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
ASoC: rt711-sdw: add missing readable registers
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
firmware: cs_dsp: Validate payload length before processing block
firmware: cs_dsp: Return error if block header overflows file
firmware: cs_dsp: Fix overflow checking of wmfw header
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.
This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the log message of the wmfw format version to include
the file name, and change the message to say "format" instead
of "Firmware version". Merge this with the message that logs
the timestamp.
The wmfw format version is information that is useful to have
logged because the behaviour of firmware controls depends on
the wmfw format. So "unexpected" behaviour could be caused by
having expectations based on one format of wmfw when a
different format has been loaded.
But the original message was confusing. It reported the file
format version but didn't actually log the name of the file it
referred to. It also called it "Firmware version", which is
confusing when a later message also logs a firmware version
that is the version of the actual firmware within the wmfw.
The logging of the firmware timestamp has been merged into this.
That was originally a dbg-only message, but as we are already
logging a line of info, we might as well add a few extra
characters to log the timestamp. The timestamp is now logged
in hexadecimal - it's not particularly useful as a decimal
value.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The wmfw_filename and bin_filename strings passed into cs_dsp_power_up()
and cs_dsp_adsp1_power_up() should be const char *.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't allocate a temporary buffer to hold a NUL-terminated copy
of the NAME/INFO string from the wmfw/bin. It can be printed
directly to the log. Also limit the maximum number of characters
that will be logged from this string.
The NAME/INFO blocks in the firmware files are an array of
characters with a length, not a NUL-terminated C string. The
original code allocated a temporary buffer to make a
NUL-terminated copy of the string and then passed that to
dev_info(). There's no need for this: printf formatting can
use "%.*s" to print a character array of a given length.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a quirk to skip using the newly introduced SHM Bridge
implementation while regressions are being investigated.
One occurance of return no_free_ptr() is replaced with return_ptr() to
make code easier to read. llcc, mdt_loader, ocmem, pdr, socinfo and
wcnss drivers gets simplified using cleanup.h.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaNik4VHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FgKcQAMDBclsQBIRkAkPl6BnqNG2aoEVX
VYI1W4IwqFutfVAH/0lpBX1jzj1QfHh7b7+9eB3q92+Zpi/wHW1hjUbWujFMuExt
hoC+ZYc5Ciyikfii1nYCyXAjD7VIWZD6nFo0qgyYhpgEVIaq0cqBpCIAH0doUBYa
WPEuxzxClgM0S2aHmlCforfYPGaRyQL+ZCW/ksrIgLsynJivp7VVQ6FlnfrjaLo2
Yv7BqA7ydhcBFdlST20sSXBLqWksBbZokRN6ObqC8Z9MQ/Lux6ZV+CKO56OoZZTq
vvUyl9fkaRcFr+l+6kLYsSYRRyNkw7fBy0fZhPOubdI3NCzOaOPk0nCHyrnFiXER
vAzJazmD0+kOudc3YUFN1fNLpUyCUBZ2PWRF4GVn9SG0Yq3D/+MCfdob9bqREMBu
8yaSdI0sr/G1yo3HPvReamaaYvefUn0KmiU5MqSiZJqDal3E1uLMxwTCp/0K5B/k
xSOx0dxTewO2muHYZHllcey0Y7sJ+btNbZHgIBQTqzXD/5qkW4dx2tmhwwIPZsHl
RwtlC8eE2UEsAL1f9l+vnFpu5+hVUmRO/L10D6tvZWA+h/hvDtJXGnGhMrZxXXba
syg15AaAZIoNLPtUsoDul39pM3iXERN7Ht/aEb44UzOQvRNJISH2p+UMy1mv+xWW
9ef3aGiq4sBmzGpz
=1rmh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uvSl
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.11
This adds a quirk to skip using the newly introduced SHM Bridge
implementation while regressions are being investigated.
One occurance of return no_free_ptr() is replaced with return_ptr() to
make code easier to read. llcc, mdt_loader, ocmem, pdr, socinfo and
wcnss drivers gets simplified using cleanup.h.
* tag 'qcom-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
Link: https://lore.kernel.org/r/20240709191246.3053-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
-----BEGIN PGP SIGNATURE-----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=Eknv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaM/jYACgkQYKtH/8kJ
UieyzBAAjEB2YIKZzlt/OFca+NG3zYlnt2rYxjW0Jc4wI/LaJn6fshQ/fExjvUqB
lfYIn5rLVXsB29+Xc1fK8rGEp5N2AtY5syAr2Ji44EXheCNa5HsxkLVS9K6bjUvr
ljJYo23Gr3S9XnkClGVxuZX7QfS0DUPSr1mo4kJXiNhUg++YDTG6A0z/Njo/LziO
pzSmc8vG0pPGG+B5GNwiQO2KW8ZFgT6L0A8neLIcols3o0Vcnce6MnT+OHpRFbjx
bEvo9I/JbKFRRzYzztTb2Qtl3tzo230K/D5/8oaLKkLj7FZrULudrPYs0nT4l8tN
qN/8gqsKxKTqPxFgQlSIT9G+14OqsKWcLs4qTNnZUsVweIoCnWj2IEkXY6C4KOHX
1LHTucglBK7LwBxBtbjE6bNwGuMnaZJycc9UDmDcGzuhEhFpUH6Jp6NG8Jf8xv7L
Ua1JJbF4cnAFQMOxkukYqxu2G7j3qmK4irsoVUJDZsl6ZY3Qn7itkpsKCw24Gspz
HvAASOp1wpkz4aFCR61kPOubsKKWMTe0zOTCDPHqeMX+PrjfH9nkuXCw0N44zlHB
VuCl5yqVnWmmKbxZ5ahFgogZBu5gLF5LtMgLQAD2zzL01JT1kZydFtGvh5/uVdDC
8yym+fdL7UeolocK9Qj6M1KKfpiLr2OYGuk9ONG7E/9yknOfDJk=
=lPdX
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip:
Support for writing "bitstream info" to the flash using the auto-update
driver. At this point the "bitstream info" is a glorified dtbo wrapper,
but there's plans to add more info there in the future. Additionally,
rework some allocations in the driver and use scope-based cleanup on
them.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZorOFAAKCRB4tDGHoIJi
0mnOAQCyWCj/tH+Cq5VEhW6NLYzkkiv/4fkE5mNrYiTuEPg1sAD+Lu6Cu9dvMgiy
hHLty4XT9CRV81yBWcBpViua1nkVwQ4=
=MbUu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KCwt
-----END PGP SIGNATURE-----
Merge tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V firmware drivers for v6.11
Microchip:
Support for writing "bitstream info" to the flash using the auto-update
driver. At this point the "bitstream info" is a glorified dtbo wrapper,
but there's plans to add more info there in the future. Additionally,
rework some allocations in the driver and use scope-based cleanup on
them.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: use scope-based cleanup where possible
firmware: microchip: move buffer allocation into mpfs_auto_update_set_image_address()
firmware: microchip: support writing bitstream info to flash
Link: https://lore.kernel.org/r/20240707-lukewarm-film-8a9da40a1c27@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240708144855.385332-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As it turns out, clearing the BSS was not the right fix for the issue
that was ultimately fixed by commit decd347c2a ("x86/efistub:
Reinstate soft limit for initrd loading"), and given that the Windows
EFI loader becomes very unhappy when entered with garbage in BSS, this
is one thing that x86 PC EFI implementations can be expected to get
right.
So drop it from the pure PE entrypoint. The handover protocol entrypoint
still needs this - it is used by the flaky distro bootloaders that
barely implement PE/COFF at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The fail label is only used in a situation where the previous EFI API
call succeeded, and so status will be set to EFI_SUCCESS. Fix this, by
dropping the goto entirely, and call efi_exit() with the correct error
code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
0c18184de9 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
brought support for T2 Macs in apple-gmux. But in order to use dual GPU,
the integrated GPU has to be enabled. On such dual GPU EFI Macs, the EFI
stub needs to report that it is booting macOS in order to prevent the
firmware from disabling the iGPU.
This patch is also applicable for some non T2 Intel Macs.
Based on this patch for GRUB by Andreas Heider <andreas@heider.io>:
https://lists.gnu.org/archive/html/grub-devel/2013-12/msg00442.html
Credits also goto Kerem Karabay <kekrby@gmail.com> for helping porting
the patch to the Linux kernel.
Cc: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
[ardb: limit scope using list of DMI matches provided by Lukas and Orlando]
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The smbios.c source file is not currently included in the x86 build, and
before we can do so, it needs some tweaks to build correctly in
combination with the EFI mixed mode support.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The SHM bridge makes the Qualcomm RB3 and SM8150-HDK reset while probing
the RMTFS (in qcom_scm_assign_mem()). Blacklist the SHM Bridge on
corresponding platforms using SoC-level compat string. If later it's
found that the bad behaviour is limited just to the particular boards
rather than SoC, the compat strings can be adjusted.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: f86c61498a ("firmware: qcom: tzmem: enable SHM Bridge support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Qualcomm RB3
Link: https://lore.kernel.org/r/20240704-shmbridge-blacklist-v1-1-14b027b3b2dc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use 'return_ptr' helper for returning a pointer without cleanup for
shorter code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240703083046.95811-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check to cs_dsp_coeff_write_ctrl() to abort if the control
is not writeable.
The cs_dsp code originated as an ASoC driver (wm_adsp) where all
controls were exported as ALSA controls. It relied on ALSA to
enforce the read-only permission. Now that the code has been
separated from ALSA/ASoC it must perform its own permission check.
This isn't currently causing any problems so there shouldn't be any
need to backport this. If the client of cs_dsp exposes the control as
an ALSA control, it should set permissions on that ALSA control to
protect it. The few uses of cs_dsp_coeff_write_ctrl() inside drivers
are for writable controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240702110809.16836-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the STACKLEAK gcc plugin to arm32 by adding the helper used by
stackleak common code: on_thread_stack(). It initialize the stack with the
poison value before returning from system calls which improves the kernel
security. Additionally, this disables the plugin in EFI stub code and
decompress code, which are out of scope for the protection.
Before the test on Qemu versatilepb board:
# echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
lkdtm: Performing direct entry STACKLEAK_ERASING
lkdtm: XFAIL: stackleak is not supported on this arch (HAVE_ARCH_STACKLEAK=n)
After:
# echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
lkdtm: Performing direct entry STACKLEAK_ERASING
lkdtm: stackleak stack usage:
high offset: 80 bytes
current: 280 bytes
lowest: 696 bytes
tracked: 696 bytes
untracked: 192 bytes
poisoned: 7220 bytes
low offset: 4 bytes
lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Update the efi_get_smbios_string() macro to take a pointer to the entire
record struct rather than the header. This removes the need to pass the
type explicitly, as it can be inferred from the typed pointer. Also,
drop 'type' from the prototype of __efi_get_smbios_string(), as it is
never referenced.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Between kexec and confidential VM support, handling the EFI memory maps
correctly on x86 is already proving to be rather difficult (as opposed
to other EFI architectures which manage to never modify the EFI memory
map to begin with)
EFI fake memory map support is essentially a development hack (for
testing new support for the 'special purpose' and 'more reliable' EFI
memory attributes) that leaked into production code. The regions marked
in this manner are not actually recognized as such by the firmware
itself or the EFI stub (and never have), and marking memory as 'more
reliable' seems rather futile if the underlying memory is just ordinary
RAM.
Marking memory as 'special purpose' in this way is also dubious, but may
be in use in production code nonetheless. However, the same should be
achievable by using the memmap= command line option with the ! operator.
EFI fake memmap support is not enabled by any of the major distros
(Debian, Fedora, SUSE, Ubuntu) and does not exist on other
architectures, so let's drop support for it.
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Check that all fields of a V2 algorithm header fit into the available
firmware data buffer.
The wmfw V2 format introduced variable-length strings in the algorithm
block header. This means the overall header length is variable, and the
position of most fields varies depending on the length of the string
fields. Each field must be checked to ensure that it does not overflow
the firmware data buffer.
As this ia bugfix patch, the fixes avoid making any significant change to
the existing code. This makes it easier to review and less likely to
introduce new bugs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load()
to be done before the block is processed.
The check that the length of a block payload does not exceed the number
of remaining bytes in the firwmware file buffer was being done near the
end of the loop iteration. However, some code before that check used the
length field without validating it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error from cs_dsp_power_up() if a block header is longer
than the amount of data left in the file.
The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop
while there was enough data left in the file for a valid region. This
protected against overrunning the end of the file data, but it didn't
abort the file processing with an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the checking that firmware file buffer is large enough for the
wmfw header, to prevent overrunning the buffer.
The original code tested that the firmware data buffer contained
enough bytes for the sums of the size of the structs
wmfw_header + wmfw_adsp1_sizes + wmfw_footer
But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and
Halo Core the equivalent struct is wmfw_adsp2_sizes, which is
4 bytes longer. So the length check didn't guarantee that there
are enough bytes in the firmware buffer for a header with
wmfw_adsp2_sizes.
This patch splits the length check into three separate parts. Each
of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked
separately before they are used.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A write sequence is a sequence of register addresses
and values executed by some Cirrus DSPs following
certain power state transitions.
Add support for Cirrus drivers to update or add to a
write sequence present in firmware.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-2-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Retrieving the system framebuffer's parent device in sysfb_init()
increments the parent device's reference count. Hence release the
reference before leaving the init function.
Adding the sysfb platform device acquires and additional reference
for the parent. This keeps the parent device around while the system
framebuffer is in use.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9eac534db0 ("firmware/sysfb: Set firmware-framebuffer parent device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081818.15696-1-tzimmermann@suse.de
The main addition is the split of bus and driver into distinct modules
The FF-A bus module is initialized at subsys_initcall level when builtin.
FF-A drivers initialization is now changed to module_init level so that
pKVM ffa proxy is all setup and running in case pKVM hypervisor needs to
trap and handle FF-A calls.
One of the reason for not having this split from the beginning is the
need to workaround the FF-A v1.0 NULL UUID. The FF-A bus layer called
into FF-A driver and populated the device UUID if it matches with the
driver attempting to match. Moving the workaround away from the FF-A
bus layer to the FF-A core driver as a bus notifier will help to remove
the dependency.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmZ1dMsACgkQAEG6vDF+
4phkJBAA0ybLo3iExgUTUi7G+zoCvbnt2vCWGhcd/TnOHuQYEl2pJG8N4tAytBDd
CsUpWtX7nzo2DKV9UOM+TjyFVP0J2m8UvlUVb+X2CNbg2vUfVZLm831EN7WbdS1w
yXAgyf3QMaLrmT9QVhf5FZDLJF2YV589cdBLML8PsJjbkKE5q3Xre2w3uv7dW7uE
21zfAxrlqdbj3AuWSTt9aBxnkOXifhw93raoFL3Jr3RHOhaIot7KJbsFUFPNikZQ
Q5daFnwGkKMslW18LUBB7VYlkDBtsHe4QPFddMKXRSufdQk65kB4q/TL79QDoSQ3
7CgJZ2yl/gCeLr5nEmTGeQVnxaqQDE0bw1q9DqskcE/2Tfo916l260qix3qzLmtF
/nmkP8geLijRAqkeAKXxj0vr5j3CWSGn2ziLi0167QUPnYBvtAgKKuPVUwZG3GBE
hLwPIiclzJA5HnswsQm8zEOWwF1po5mycRV+dxINRWt6rh4jhSWVZvYH77kg6t0I
wEc7mauh879G5CHuLGiwSof6R2pDzhXRwX9Q37kpYoq10/Vm9KPnm5XeUOQZ5F/s
lZH8PZfds6M7tALrc9nsdMMF3YMU31oH9bpBYYQrad5J89Cx41OeNM41BkKLK7dW
K2pJ7wOL3Us7a/gNszbL7kUG7wRVe/qVNouhC0y3uGOPFNScuTs=
=Kl7/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tW+N
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A driver updates for v6.11
The main addition is the split of bus and driver into distinct modules
The FF-A bus module is initialized at subsys_initcall level when builtin.
FF-A drivers initialization is now changed to module_init level so that
pKVM ffa proxy is all setup and running in case pKVM hypervisor needs to
trap and handle FF-A calls.
One of the reason for not having this split from the beginning is the
need to workaround the FF-A v1.0 NULL UUID. The FF-A bus layer called
into FF-A driver and populated the device UUID if it matches with the
driver attempting to match. Moving the workaround away from the FF-A
bus layer to the FF-A core driver as a bus notifier will help to remove
the dependency.
* tag 'ffa-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Split bus and driver into distinct modules
firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier
Link: https://lore.kernel.org/r/20240624103451.2870146-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main addition this time is the support for platform to agent(p2a
also referred sometimes as notification or Rx) channel completion via
interrupt driven method. Currently, the OSPM agent clears or
acknowledge the receipt of the norification or delayed response by
updating the flags in the shared memory region which the platform is
expected to poll.
On some platforms that are completely interrupt driven, the OSPM
agent is expected to send a response message instead. This change
adds the support for the same.
Other changes include addition of a separate mailing list specific to
SCMI to allow open discussions about the interface itself in addition
to the kernel driver updates and support for system suspend via the
platform noification used on some systems.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmZy+u8ACgkQAEG6vDF+
4pi1txAAqhkjxC+pRVomJXkFvpUBGuFXYegChIMIheMfuFWp52zbIBq9Vapb1GnV
ropLGFyjp5lfV8aOHGHOitkw8NNpXjvrUGyE/l4ClFClIsPrDiAO5OoM5e6rpZek
+JmVpUcRzbC4r4xiTWSuHu+qIlp/QZln7lY65/1rwPZIot51gPe5P8aMBAsgJDOM
FK8LgVPbcHsyiXUetZHT/OcooBXI/Rg27Av28gOLce4gTAZhwYhTQTioXq3mSQMI
tEPX0P2qqDkgGHEgriISFrsidezRYSt65wb9nSaQPT31wkF/p/oDTVqVH5GodiAP
th44xePd6bIb/t0fo56Wb9SeLAYwgz1lHwz/gt8esIbUxVo9PLl2Jv71dR1lntBv
KK3mfUQnvXG3P8YTmLG8/lUNKGqryynic8SHI4TAYl4Urz2QJ0fUHlLik14LjRa7
j9+g9Ry9hOvppUakPmQKQfzo6QLMVrFbxcU5rL7o4CPaNuZXSxkuapGVgZ5UGDPR
03PtDpjO/jCLb3pGYZzzTOg5qCHM7nBcxM8Qpq+zGep24/3/kEmnbYkKMUKhEKzb
cVPCKkbSaq37XQ3Xu7UU62ljv1nV9IvBaIs3hNPyZgrwhtjs9JLwGV5zcFpIzNQ7
bQgVCuU/Me7wggUW7SGY2OnHGyHwGEbe8xT3pFSWXobEg8c6znw=
=LNEQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y+uP
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI driver updates for v6.11
The main addition this time is the support for platform to agent(p2a
also referred sometimes as notification or Rx) channel completion via
interrupt driven method. Currently, the OSPM agent clears or
acknowledge the receipt of the norification or delayed response by
updating the flags in the shared memory region which the platform is
expected to poll.
On some platforms that are completely interrupt driven, the OSPM
agent is expected to send a response message instead. This change
adds the support for the same.
Other changes include addition of a separate mailing list specific to
SCMI to allow open discussions about the interface itself in addition
to the kernel driver updates and support for system suspend via the
platform noification used on some systems.
* tag 'scmi-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for platform to agent channel completion
dt-bindings: firmware: arm,scmi: Add support for notification completion channel
firmware: arm_scmi: Add support for system suspend in power control driver
MAINTAINERS: Add mailing list for SCMI drivers
Link: https://lore.kernel.org/r/20240620093924.375244-3-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the dmi driver for riscv which would allow access the
SMBIOS info through some userspace file(/sys/firmware/dmi/*).
The change was based on that of arm64 and has been verified
by dmidecode tool.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240613065507.287577-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/meson/meson_sm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-firmware-meson-v1-1-28e4138a8597@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The "memory protection" mechanism mentioned in the comment is the SHM
Bridge. This is also the reason why we do not convert this call to using
the TZ memory allocator.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-13-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Parse the "memory-region" property and - if present - use it to assign
the dedicated reserved memory to the underlying DMA callbacks which will
then allocate memory for the SCM calls from it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-12-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add a variant of the tzmem allocator that configures the memory pools as
SHM bridges. It also enables the SHM bridge globally so non-SHM bridge
memory will no longer work with SCM calls.
If enabled at build-time, it will still be checked for availability at
run-time. If the architecture doesn't support SHM Bridge, the allocator
will fall back to the generic mode.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-11-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add low-level primitives for enabling SHM bridge support as well as
creating and destroying SHM bridges to qcom-scm.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-10-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drop the DMA mapping operations from qcom_scm_qseecom_app_send() and
convert all users of it in the qseecom module to using the TZ allocator
for creating SCM call buffers. As this is largely a module separate from
the SCM driver, let's use a separate memory pool. Set the initial size to
4K and - if we run out - add twice the current amount to the pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Amirreza Zarrabi <quic_azarrabi@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-9-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of manually kmalloc()ing it and then mapping to physical space.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-8-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-7-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-6-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Let's use the new TZ memory allocator to obtain a buffer for this call
instead of using dma_alloc_coherent().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-5-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We need to allocate, map and pass a buffer to the trustzone if we have
more than 4 arguments for a given SCM call. Let's use the new TrustZone
allocator for that memory and shrink the code in process.
As this code lives in a different compilation unit than the rest of the
SCM code, we need to provide a helper in the form of
qcom_scm_get_tzmem_pool() that allows the SMC low-level routines to
access the SCM memory pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-4-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Select the TrustZone memory allocator in Kconfig and create a pool of
memory shareable with the TrustZone when probing the SCM driver.
This will allow a gradual conversion of all relevant SCM calls to using
the dedicated allocator.
The policy used for the pool is "on-demand" and the initial size is 0
as - depending on the config - it's possible that no SCM calls needing
to allocate memory will be called. The sizes of possible allocations also
vary substiantially further warranting the "on-demand" approach.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-3-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We have several SCM calls that require passing buffers to the TrustZone
on top of the SMC core which allocates memory for calls that require
more than 4 arguments.
Currently every user does their own thing which leads to code
duplication. Many users call dma_alloc_coherent() for every call which
is terribly unperformant (speed- and size-wise).
Provide a set of library functions for creating and managing pools of
memory which is suitable for sharing with the TrustZone, that is:
page-aligned, contiguous and non-cachable as well as provides a way of
mapping of kernel virtual addresses to physical space.
Make the allocator ready for extending with additional modes of operation
which will allow us to support the SHM bridge safety mechanism once all
users convert.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-2-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci
firmware driver and SD card support on the milkv duo riscv
board.
-----BEGIN PGP SIGNATURE-----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=0mtC
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
This will used by drm/msm to initialize GPU registers that Qualcomm's
firmware doesn't make writeable to the kernel.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240430-a750-raytracing-v3-2-7f57c5ac082d@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently we return the value from invoke_psci_fn() directly as return
value from psci_system_suspend(). It is wrong to send the PSCI interface
return value directly. psci_to_linux_errno() provide the mapping from
PSCI return value to the one that can be returned to the callers within
the kernel.
Use psci_to_linux_errno() to convert and return the correct value from
psci_system_suspend().
Fixes: faf7ec4a92 ("drivers: firmware: psci: add system suspend support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240515095528.1949992-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently on
x86
- Avoid a false positive kmemleak warning on arm64
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZm1QFgAKCRAwbglWLn0t
XDCpAP9tB6S9uQwDsR9PuxJfWOALJEqoMWCjGzLjt5HlGePlvAD9HaltvkT5p9Ff
TkfP4Ivl29BtuaNBIFGEiC6KJXETawc=
=Tvsr
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another small set of EFI fixes. Only the x86 one is likely to affect
any actual users (and has a cc:stable), but the issue it fixes was
only observed in an unusual context (kexec in a confidential VM).
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently
on x86
- Avoid a false positive kmemleak warning on arm64"
* tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/arm64: Fix kmemleak false positive in arm64_efi_rt_init()
efi/x86: Free EFI memory map only when installing a new one.
efi/arm: Disable LPAE PAN when calling EFI runtime services
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <stable@vger.kernel.org>
Fixes: f0ef652347 ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <Ashish.Kalra@amd.com>
Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On some systems the SCMI platform to agent(p2a) communication can be fully
interrupt driven. The notification(p2a) channel needs completion interrupt
to drive its notification queue at the platform. Without it, the platform
notification will not work as the platform will wait for agent indication
of clearing the channel via interrupt unlike few platforms which can poll
instead.
To support such systems, an optional unidirectional mailbox channel for
p2a reply communication. If the platform sets channel INTR flag set
indicating that it expects the agent to trigger the interrupt to acknowledge
the reciept of the notification or any p2a message, and the completion
interrupt channel is provided, send a mailbox message to the platform
after the p2a message is read and channel is freed to accept new
notifications or p2a messages.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240510-scmi-notify-v2-2-e994cf14ef86@nxp.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI supports system suspend notification from the platform. The suuport
for the same can be added in SCMI power control driver. However, currently
there is no way to pass suspend level to pm_suspend() call from this
driver, so use suspend-to-ram(S2R) will be used.
Couple of things to note:
1) The userspace can still configure whatever default behaviour expected
for S2R.
2) The userspace needs to keep the wakeup source enabled, otherwise the
system may never resume back.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240428075105.2187837-1-peng.fan@oss.nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/gsmi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/coreboot_table.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/framebuffer-coreboot.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/memconsole.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/memconsole-coreboot.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/memconsole-x86-legacy.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/cbmem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firmware/google/vpd-sysfs.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240605-md-drivers-firmware-google-v1-1-18878de97fa5@quicinc.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The current arm32 architecture does not yet support the
HAVE_LD_DEAD_CODE_DATA_ELIMINATION feature. arm32 is widely used in
embedded scenarios, and enabling this feature would be beneficial for
reducing the size of the kernel image.
In order to make this work, we keep the necessary tables by annotating
them with KEEP, also it requires further changes to linker script to KEEP
some tables and wildcard compiler generated sections into the right place.
When using ld.lld for linking, KEEP is not recognized within the OVERLAY
command, and Ard proposed a concise method to solve this problem.
It boots normally with defconfig, vexpress_defconfig and tinyconfig.
The size comparison of zImage is as follows:
defconfig vexpress_defconfig tinyconfig
5137712 5138024 424192 no dce
5032560 4997824 298384 dce
2.0% 2.7% 29.7% shrink
When using smaller config file, there is a significant reduction in the
size of the zImage.
We also tested this patch on a commercially available single-board
computer, and the comparison is as follows:
a15eb_config
2161384 no dce
2092240 dce
3.2% shrink
The zImage size has been reduced by approximately 3.2%, which is 70KB on
2.1M.
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
There's a bunch of structs created and freed every time the mailbox is
used. Move them to use the scope-based cleanup infrastructure to avoid
manually tearing them down. mpfs_auto_update_available() didn't free the
memory that it used (albeit it allocated exactly once during probe) so
that gets moved over too.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This buffer is used exclusively by mpfs_auto_update_set_image_address(),
so move the management of it there, employing the recently added cleanup
infrastructure to avoid littering the function with gotos.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.
Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.
Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.
Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.
Fixes: 1a4fec49ef ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move FIRMWARE_VERSION_MASK macro to xlnx-zynqmp.h so that other
drivers can use it for verifying the supported firmware version.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240425095913.919390-1-ronak.jain@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.
However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.
Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.
BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Make the FF-A bus on its own as a distinct module initialized at
subsys_initcall level when builtin.
Keep the FF-A driver core stack, together with any configured transport,
in a different module initialized as module_init level.
FF-A drivers initialization is now changed to module_init level.
Acked-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240515094028.1947976-2-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently FF-A bus ffa_device_match() handles the workaround for the
FF-A v1.0 devices which are not populated with UUID to match. The FF-A
bus layer calls into FF-A driver and populates the device UUID if it
matches with the driver attempting to match.
But this forces to have both FF-A bus and core driver to be bundled into
a single module. However, keep it as a single module adds problems for
the FF-A driver registrations and their initcall levels.
In preparation to split the FF-A bus and the core driver into distinct
modules, we need to move the workaround away from the FF-A bus layer.
We can add it into the FF-A core driver as a bus notifier.
In order to do so, we need to always match any driver with the device if
the UUID is NULL and then during the driver binding phase, we can populate
the UUID if it matches with the driver UUID table using the bus notifiers.
We also need to add a check for NULL UUID before calling the device/driver
probe as devices with NULL UUID is possible since we match all for that
case.
Acked-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240515094028.1947976-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This flag was never supported by firmware, so remove it.
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240514180046.543763-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As with previous platforms, qseecom and the uefisecapp provides access
to EFI variables. Add X1E CRD and QCP devices to the allowlist.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240523-x1e-efivarfs-v1-1-5d986265b8e4@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
Right now efi-pstore either returns 0 (success) or -EIO; but we
do have a function to convert UEFI errors in different standard
error codes, helping to narrow down potential issues more accurately.
So, let's use this helper here.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When building ARCH=loongarch defconfig + CONFIG_UNWINDER_ORC=y using
LLVM, there is a warning from ld.lld when linking the EFI zboot image
due to the use of unreachable() in number() in vsprintf.c:
ld.lld: warning: drivers/firmware/efi/libstub/lib.a(vsprintf.stub.o):(.discard.unreachable+0x0): has non-ABS relocation R_LARCH_32_PCREL against symbol ''
If the compiler cannot eliminate the default case for any reason, the
.discard.unreachable section will remain in the final binary but the
entire point of any section prefixed with .discard is that it is only
used at compile time, so it can be discarded via /DISCARD/ in a linker
script. The asm-generic vmlinux.lds.h includes .discard and .discard.*
in the COMMON_DISCARDS macro but that is not used for zboot.lds, as it
is not a kernel image linker script.
Add .discard and .discard.* to /DISCARD/ in zboot.lds, so that any
sections meant to be discarded at link time are not included in the
final zboot image. This issue is not specific to LoongArch, it is just
the first architecture to select CONFIG_OBJTOOL, which defines
annotate_unreachable() as an asm statement to add the
.discard.unreachable section, and use the EFI stub.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2023
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-11-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
- Followup fix for the EFI boot sequence refactor, which may result in
physical KASLR putting the kernel in a region which is being used for
a special purpose via a command line argument.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZks6+wAKCRAwbglWLn0t
XCJzAQCOgl1bhfwU14U0KNjboeCcQKYrvD/6AmqM/UBsQyfB4gD+NuEAh2iKldeS
+5DuaWE3/sMPrZlTpatNF5E99mu2uAQ=
=Um+v
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Followup fix for the EFI boot sequence refactor, which may result in
physical KASLR putting the kernel in a region which is being used for
a special purpose via a command line argument.
* tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Omit physical KASLR when memory reservations exist
* KCFI violation fix for dmi-id.
* Stop decoding on broken (short) DMI table entry.
* Print info about populated memory slots at boot.
-----BEGIN PGP SIGNATURE-----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=088k
-----END PGP SIGNATURE-----
Merge tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi updates from Jean Delvare:
"Bug fixes:
- KCFI violation in dmi-id
- stop decoding on broken (short) DMI table entry
New features:
- print info about populated memory slots at boot"
* tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Add info message for number of populated and total memory slots
firmware: dmi: Stop decoding on broken entry
firmware: dmi-id: add a release callback function
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
The legacy decompressor has elaborate logic to ensure that the
randomized physical placement of the decompressed kernel image does not
conflict with any memory reservations, including ones specified on the
command line using mem=, memmap=, efi_fake_mem= or hugepages=, which are
taken into account by the kernel proper at a later stage.
When booting in EFI mode, it is the firmware's job to ensure that the
chosen range does not conflict with any memory reservations that it
knows about, and this is trivially achieved by using the firmware's
memory allocation APIs.
That leaves reservations specified on the command line, though, which
the firmware knows nothing about, as these regions have no other special
significance to the platform. Since commit
a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
these reservations are not taken into account when randomizing the
physical placement, which may result in conflicts where the memory
cannot be reserved by the kernel proper because its own executable image
resides there.
To avoid having to duplicate or reuse the existing complicated logic,
disable physical KASLR entirely when such overrides are specified. These
are mostly diagnostic tools or niche features, and physical KASLR (as
opposed to virtual KASLR, which is much more important as it affects the
memory addresses observed by code executing in the kernel) is something
we can live without.
Closes: https://lkml.kernel.org/r/FA5F6719-8824-4B04-803E-82990E65E627%40akamai.com
Reported-by: Ben Chaney <bchaney@akamai.com>
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places. The majority of
changes are about ASoC, especially SOF / Intel stuff, and we see an
interesting work for ASoC DAPM graph visualization, while there are
many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements
-----BEGIN PGP SIGNATURE-----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=YKT4
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in the
EFI boot stub
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZkMPmAAKCRAwbglWLn0t
XNw2AQC96tWvh7piDGw2LTGp4zqRcoe2LV09hNE8rgk63g+2LgEA81TOhEKwpeie
23GI9WiEABdRT8kt6ebuVatfzrn5jgk=
=8la7
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Only a handful of changes this cycle, consisting of cleanup work and a
low-prio bugfix:
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in
the EFI boot stub"
* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: only free priv.runtime_map when allocated
efi: Clear up misconceptions about a maximum variable name size
efivarfs: Remove unused internal struct members
Documentation: Mark the 'efivars' sysfs interface as removed
efi: pstore: Request at most 512 bytes for variable names
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----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=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
As part of adding support for calling i2c_register_spd() on muxed SMBUS
segments the same message has been removed from i2c_register_spd().
However users may find it useful, therefore reintroduce it as part of
the DMI scan code.
[JD: Static variable dmi_memdev_populated_nr is only used in __init
functions, so it can be marked __initdata.]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
* Improvements
- Set driver owner in the core registration so that coreboot drivers
don't need to set it individually.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZj2VQBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0CO8A/iD11kx8c54DChTRZ1x/1kpVkp8GOxTp
guS584xIy29CAQDeHTATY5YVEfff3pH3sggQE+60+gLgtRD6pW5CUE6SAg==
=3GxW
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-firmware-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Set driver owner in the core registration so that coreboot drivers
don't need to set it individually
* tag 'tag-chrome-platform-firmware-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: cbmem: drop driver owner initialization
firmware: coreboot: store owner from modules with coreboot_driver_register()
Merge cpufreq updates for 6.10:
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i: Add support for opp_supported_hw, H616 platform and general
cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan
Carpenter, Viresh Kumar).
- CPPC: Fix possible null pointer dereference (Aleksandr Mishin).
- Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
* pm-cpufreq: (46 commits)
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles
cpufreq: sun50i: fix error returns in dt_has_supported_hw()
cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations
cpufreq: dt-platdev: eliminate uses of of_node_put()
cpufreq: dt: eliminate uses of of_node_put()
cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node()
...
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
The updates this time are a bit smaller than most times, mainly because
it is not totally dominated by new Qualcomm hardware support. Instead,
we larger than average updates for Rockchips, NXP, Allwinner and TI.
The only two new SoCs this time are both from NXP and are minor variants
of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console
and a few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines.
-----BEGIN PGP SIGNATURE-----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=SnV4
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
These are a couple of last minute fixes that came in over the
previous week, addressing:
- A pin configuration bug on a qualcomm board that caused
issues with ethernet and mmc.
- Two minor code fixes for misleading console output in the
microchip firmware driver.
- A build warning in the sifive cache driver
-----BEGIN PGP SIGNATURE-----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=CxgC
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
This fixes a sleep-while-atomic issue in pmic_glink, stemming from the
fact that the GLINK callback comes from interrupt context.
It fixes the Bluetooth address in the example of qcom,wcnss, and it
enables UEFI variables on SC8180X devices (Primus and Flex 5G).
-----BEGIN PGP SIGNATURE-----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=rvvf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CB3q
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.10
This fixes a sleep-while-atomic issue in pmic_glink, stemming from the
fact that the GLINK callback comes from interrupt context.
It fixes the Bluetooth address in the example of qcom,wcnss, and it
enables UEFI variables on SC8180X devices (Primus and Flex 5G).
* tag 'qcom-drivers-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
Link: https://lore.kernel.org/r/20240508020900.204413-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Avoid triggering the softlockup watchdog when accepting large chunks
of memory from the hypervisor
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZjS4yAAKCRAwbglWLn0t
XIOQAPkBZlRdhlbegKjguyvVk9S6EKAgA1j94L/gK8ZL9olbUwD/fEuBIm+U2wtv
Ntulu0l5kiHSJzC8lwsUdtUSd+ovUQg=
=o5dU
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
Testing indicates that qseecom and uefisecapp are working on both the
SC8180X Primus and Lenovo Flex 5G, providing EFI variable access.
Add the two to the allow list.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240430-uefisecapp-allowlist-sc8180x-v1-1-1a626ea9c5f1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If a DMI table entry is shorter than 4 bytes, it is invalid. Due to
how DMI table parsing works, it is impossible to safely recover from
such an error, so we have to stop decoding the table.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/linux-kernel/Zh2K3-HLXOesT_vZ@liuwe-devbox-debian-v2/T/
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
firmware:
Two changes for misleading printouts from the auto update driver, one
for an erroneous success message and the other to make it clear
addresses are in hex.
cache:
Samuel's fix for the ccache driver left an unused variable, so he
sent a follow up patch to silence that complaint.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZiza9gAKCRB4tDGHoIJi
0ilxAQCxhcflEAdPdRBjyqfzsex66mCIhLcoUYSvnjEuLv/7QgD/bpLaXPKsUS57
YcZ0Bqoxghi65Y0hjL0XUbrF375AwAM=
=TQN3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XAYv
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-fixes-for-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.9-rc6
firmware:
Two changes for misleading printouts from the auto update driver, one
for an erroneous success message and the other to make it clear
addresses are in hex.
cache:
Samuel's fix for the ccache driver left an unused variable, so he
sent a follow up patch to silence that complaint.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
cache: sifive_ccache: Silence unused variable warning
Link: https://lore.kernel.org/r/20240427-unflawed-humorless-690472f9c5a0@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmYwBsUACgkQh9CWnEQH
BwTeNg//THwPFu55oCQ+CsI6xUAPmcffjEcMk1qiELOo7PyoY9UkjKtjOMCW44tZ
uwAtzy3jMPaFI1Ng/EZPErz7KOlwoNeqIjTvOpbRw1tVJ/7tkrnk5vi8zqRQUv4a
jrAv+yybXDaKD/aFX41KH43OfMl0Fi5CnxUqlb5U8Mm0awwBfz2jvnetaZAuueAd
Hwet2Lt/jOX43GVVHRaxaqP/rJnr7xdUUW7iCQ+Qi2xvXJIpNj/mL6tvVAKFe2JZ
sig3uh/NtK6Pp1xAX78aTuf0L4NLFqQpVORuO1ncb4wT92U0Yhi3r47z4reAM6GN
nX5rLEjeV/yaRA2532c9MVALRT+4f1ic0Pq8Knj7WaH0bRrTjKQK4YiwR0KdXhy1
GGC58bUOa1HKynZXCDxVih0oOS4REd511WyiLqSPdpsvzrtHCqwC59LOh5PDaoEn
9aBof7eRK8r7KXEsvU3av5WiJjM+O2ILrRlfuiBt/nuvyvX1G3uSTq3Gncb4e2n8
1LWGpnj1CyW64seJ2v3a1Mx07ArWgy1wwg3iRt1aOMcKHrfO3evLdRwHlFq2Ke+t
U0cvR6nlpo9H6CPCMCU/LmK3chYWBDlIghua3v7AJSL9p9o6RcWyAV8SrP/E60A4
0O1rfNdLhQkl5MmIyhA5QTaAvsGplb9QNkf8m9Rx7e8krDTJjXA=
=400A
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L8Aj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Support for handling notification pending interrupt(NPI)
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
- A guest/VM running under a hypervisor(normal world usecase)
- An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)
Also, when the FF-A driver is running inside a guest VM under an
hypervisor, the driver/guest VM doesn't have the permission/capability
to request the creation of notification bitmaps. For a VM, the hypervisor
reserves memory for its VM and hypervisor framework notification bitmaps
and the SPMC reserves memory for its SP and SPMC framework notification
bitmaps before the hypervisor initializes it.
These changes include skipping of creation of notification bitmaps, some
refactoring around schedule receiver interrupt(SRI) handling and addition
of support for NPI.
2. Support for FF-A indirect messaging
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint and inform the scheduler that the
receiver endpoint must be run.
Apart from these two main features, there is an optimisation to avoid
queuing of a work when already running on the worker queue.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmYqYlMACgkQAEG6vDF+
4piZdg//bXofMTqAzCgCJzzgCHnmPmAvoCk0cDzogorQ4rlZpabYOGMkVGeWIh+x
p3fy/tD5HNl+AgAiglWDmchphxiqhxrMyb893oSsUUr7WHH2xeb8cLUlMrirGCMD
CDUQ2mAv1h09pSvHfCLcJD4MVHUZ8maHCo5Bqg5zqMYV7poOSoUJJ/nHCWSHG2il
S5h4ScEgtJNd7FmsnieSnTXwUKa7TXbVDWbUAhxukymAfJfQcwJ9XP8X537W/NkJ
1UH4asPadU/ScRi6egNpaledEWiVM2Z1emsItfd3oO399lCHIBb9o5XDZg3TWaEi
JEbKaBt6EP0g2zt4Rdjk/vPWIAwZKmnOLi1m+Cn+urZbsNBXke/7e5C1TvdXrFLA
9D0vDmO6CMnIZ+wPt/xElzsnWKGNJ3tRu5kGPAL5XpnsbsY6NLbkQ//veS2GCeyW
XYQBmd2V6nU9IB1tmRQmrtM01DbT4V02tDROaviRWgt9GrZFdBSV+uYNZ9wOVXej
LhGuSW0ouaNt6PwjxdoocFZh4cfVHGwZdtNVJNOeRRtMok2LweKM16CMtN8RexSl
QBTsHifZ0hCg+QZ9Cp2ka7nenpuVhll1dB/MmKENJWLfnn5+UMEbGoIGj/5cRn91
aYuYC3f6qnZsgWCn/hfglP4jrl0pP6/OrblFBZPZRl0IoCjgfHE=
=A2PF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Mf+D
-----END PGP SIGNATURE-----
Merge tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.10
1. Support for handling notification pending interrupt(NPI)
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
- A guest/VM running under a hypervisor(normal world usecase)
- An S-EL1 SP running under a S-EL2 SPMC(secure world only usecase)
Also, when the FF-A driver is running inside a guest VM under an
hypervisor, the driver/guest VM doesn't have the permission/capability
to request the creation of notification bitmaps. For a VM, the hypervisor
reserves memory for its VM and hypervisor framework notification bitmaps
and the SPMC reserves memory for its SP and SPMC framework notification
bitmaps before the hypervisor initializes it.
These changes include skipping of creation of notification bitmaps, some
refactoring around schedule receiver interrupt(SRI) handling and addition
of support for NPI.
2. Support for FF-A indirect messaging
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint and inform the scheduler that the
receiver endpoint must be run.
Apart from these two main features, there is an optimisation to avoid
queuing of a work when already running on the worker queue.
* tag 'ffa-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Avoid queuing work when running on the worker queue
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
firmware: arm_ffa: Add support for FFA_MSG_SEND2
firmware: arm_ffa: Stash the partition properties for query purposes
firmware: arm_ffa: Fix kernel warning about incorrect SRI/NPI
firmware: arm_ffa: Add support for handling notification pending interrupt(NPI)
firmware: arm_ffa: Refactor SRI handling in prepartion to add NPI support
firmware: arm_ffa: Skip creation of the notification bitmaps
Link: https://lore.kernel.org/r/20240426105051.1527016-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
-----BEGIN PGP SIGNATURE-----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=WRU/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yce+
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/20240426105031.1526987-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmYtIvQVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FmLMQANqfDnrplxf3OpL3I8JEqeHYvdLF
e12jXZyBlSCWRBEbphHZLKj8qSTFqpFgvqxIJ1fNqZ1AG9GeJTP8aGSkSnaYoym8
7uvSWRv2lZ13mQmaCM8PQMYJ7UhLitVfwKrLfSwV7GgqxqyJ5+tnTGpEdNE3VEhW
VaiknaR7kV2T3mUmrrgivy+0rMLimDMOVu7TcLkw5aY4SaQuerElXz1/IZO29GLK
QOqEbDsf8TcImZnMsnmMvbLO+AJ/NgmhpD9SDGTbzYtGEqsbVebklQDZNj9QXjWy
o6zPoCsPn93x95jBwFp0HgdTye4UWZZ3cix/LkyyLja4l0hMJM2QOdDstmtgymbM
itmWJ3rGfcK8Gjl6NEh+OSMq0rH84uJfXR0VrT/tRDkn4eTSk6DeZJD6lvpp1x43
2RwELsdlLobfS1znuq2hz+fkVBMh35USNadfC+B2xNyhihPKI1asG8UHu8mUz2MH
/feyBxygaI3k9G3C6G4qNg3cjvY2MDqy+u6hOv9cG3CoS5z6aRxoGfxXS6I40ABz
izoFaaae798Kau+VNAKw5OKC56UbRLlTSAVCmM5FItktK+5YIxbOIxRiMxgDxL8B
JO6fUH5xUE0nF4Ni0OF233+qmfkO+0tRqiVUVEG4mNveyBgTiJtgrZOMAnqzoVmI
BkagrDlbfbG2TvKb
=E1Yk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+dt0
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.10
The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits. Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.
The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.
initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.
Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.
The bwmon regmap cache is changed to maple tree.
After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.
Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.
More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.
Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.
The socinfo drivers learns about X1 Elite and SMB2360 PMIC.
The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.
* tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (21 commits)
soc: qcom: cmd-db: replace deprecated strncpy with strtomem
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
firmware: qcom: scm: Modify only the download bits in TCSR register
firmware: qcom: scm: Fix __scm and waitq completion variable initialization
firmware: qcom: scm: Rework dload mode availability check
firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
firmware: qcom: scm: Remove log reporting memory allocation failure
soc: qcom: pmic_glink: notify clients about the current state
soc: qcom: pmic_glink: don't traverse clients list without a lock
soc: qcom: mention intentionally broken module autoloading
firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries
soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
soc: qcom: socinfo: Add SMB2360 PMIC
soc: qcom: socinfo: Add X1E80100 SoC ID table entry
dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
soc: qcom: icc-bwmon: Convert to use maple tree register cache
firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
...
Link: https://lore.kernel.org/r/20240427160917.1431354-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
priv.runtime_map is only allocated when efi_novamap is not set.
Otherwise, it is an uninitialized value. In the error path, it is freed
unconditionally. Avoid passing an uninitialized value to free_pool.
Free priv.runtime_map only when it was allocated.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: f80d26043a ("efi: libstub: avoid efi_get_memory_map() for allocating the virt map")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This reworks the memory layout of the argument buffers passed to trusted
applications in QSEECOM, to avoid failures and system crashes.
-----BEGIN PGP SIGNATURE-----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=a4z1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IZFk
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into for-next
Qualcomm driver fix for v6.9
This reworks the memory layout of the argument buffers passed to trusted
applications in QSEECOM, to avoid failures and system crashes.
* tag 'qcom-drivers-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix memory related IO errors and crashes
Link: https://lore.kernel.org/r/20240420163816.1133528-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently notif_pcpu_irq_work_fn() may get queued from the work that is
already running on the 'notif_pcpu_wq' workqueue. This may add
unnecessary delays and could be avoided if the work is called directly
instead.
This change removes queuing of the work when already running on the
'notif_pcpu_wq' workqueue thereby removing any possible delays in that
path.
Link: https://lore.kernel.org/r/20240424131640.706870-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As it says on the tin. It can be kinda confusing when "22830" is in hex,
so prefix the hex numbers with a "0x".
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
If validation fails, both prints are made. Skip the success one in the
failure case.
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Commit 50e782a86c ("efi/unaccepted: Fix soft lockups caused by
parallel memory acceptance") has released the spinlock so other CPUs can
do memory acceptance in parallel and not triggers softlockup on other
CPUs.
However the softlock up was intermittent shown up if the memory of the
TD guest is large, and the timeout of softlockup is set to 1 second:
RIP: 0010:_raw_spin_unlock_irqrestore
Call Trace:
? __hrtimer_run_queues
<IRQ>
? hrtimer_interrupt
? watchdog_timer_fn
? __sysvec_apic_timer_interrupt
? __pfx_watchdog_timer_fn
? sysvec_apic_timer_interrupt
</IRQ>
? __hrtimer_run_queues
<TASK>
? hrtimer_interrupt
? asm_sysvec_apic_timer_interrupt
? _raw_spin_unlock_irqrestore
? __sysvec_apic_timer_interrupt
? sysvec_apic_timer_interrupt
accept_memory
try_to_accept_memory
do_huge_pmd_anonymous_page
get_page_from_freelist
__handle_mm_fault
__alloc_pages
__folio_alloc
? __tdx_hypercall
handle_mm_fault
vma_alloc_folio
do_user_addr_fault
do_huge_pmd_anonymous_page
exc_page_fault
? __do_huge_pmd_anonymous_page
asm_exc_page_fault
__handle_mm_fault
When the local irq is enabled at the end of accept_memory(), the
softlockup detects that the watchdog on single CPU has not been fed for
a while. That is to say, even other CPUs will not be blocked by
spinlock, the current CPU might be stunk with local irq disabled for a
while, which hurts not only nmi watchdog but also softlockup.
Chao Gao pointed out that the memory accept could be time costly and
there was similar report before. Thus to avoid any softlocup detection
during this stage, give the softlockup a flag to skip the timeout check
at the end of accept_memory(), by invoking touch_softlockup_watchdog().
Reported-by: Hossain, Md Iqbal <md.iqbal.hossain@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 50e782a86c ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The "msg" pointer is a struct and msg->offset is the sizeof(*msg). The
pointer here math means the memcpy() will write outside the bounds.
Cast "msg" to a u8 pointer to fix this.
Fixes: 02c19d84c7 ("firmware: arm_ffa: Add support for FFA_MSG_SEND2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd5fb6b5-81fa-4a6d-b2b8-284ca704bbff@moroto.mountain
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Crashdump collection is done based on DLOAD bits of TCSR register.
To retain other bits, scm driver need to read the register and
modify only the DLOAD bits, as other bits in TCSR may have their
own significance.
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/1711042655-31948-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is possible qcom_scm_is_available() gives wrong indication that
if __scm is initialized while __scm->dev is not and similar issue
is also possible with __scm->waitq_comp.
Fix this appropriately by the use of release barrier and read barrier
that will make sure if __scm is initialized so, is all of its field
variable.
Fixes: d0f6fa7ba2 ("firmware: qcom: scm: Convert SCM to platform driver")
Fixes: 6bf3259922 ("firmware: qcom: scm: Add wait-queue handling logic")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1711034642-22860-4-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QCOM_SCM_BOOT_SET_DLOAD_MODE scm command is applicable for very
older SoCs where this command is supported from firmware and
for newer SoCs, dload mode tcsr registers is used for setting
the download mode.
Currently, qcom_scm_set_download_mode() checks for availability
of QCOM_SCM_BOOT_SET_DLOAD_MODE command even for SoCs where this
is not used. Fix this by switching the condition to keep the
command availability check only if dload mode registers are not
available.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1711034642-22860-3-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When the agent is sending data to the SCMI platform, the drivers in the
agent could check the maximum message size supported to avoid potential
protocol buffer overflow.
Introduce the helper/accessor function get_max_msg_size() for the same.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-1-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The "SoC ID revision" as provided via the SMCCC SOCID interface can be
valuable information for drivers, when certain functionality depends
on a die revision, for instance.
One example is the sun50i-cpufreq-nvmem driver, which needs this
information to determine the speed bin of the SoC.
Export the arm_smccc_get_soc_id_revision() function so that it can be
called by any driver.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint.
An invocation of the FFA_MSG_SEND2 transfers the ownership of the Tx
buffer to the receiver endpoint(or any intermediate consumer). Completion
of an FFA_MSG_SEND2 invocation transfers the ownership of the buffer
back to the sender endpoint.
The framework defines the FFA_MSG_SEND2 interface to transmit a partition
message from the Tx buffer of the sender to the Rx buffer of a receiver
and inform the scheduler that the receiver must be run.
Link: https://lore.kernel.org/r/20240417090931.2866487-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The properies obtained from the partition information descriptor as
part of initial partitions discovery is useful as it contain info
if the partition
- Runs in AArch64 or AArch32 execution state
- Can send and/or receive direct requests
- Can send and receive indirect message
- Does support receipt of notifications.
These can be used for querying before attempting to do any of the
above operations.
Link: https://lore.kernel.org/r/20240417090921.2866447-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If the firmware returns incorrect SRI/NRI number, we fail to set it up
in the kernel which is absolutely fine.
However, we don't reset the stashed value of sched_recv or notif_pend
IRQs. When we call ffa_notifications_cleanup() in case of failures to
setup the notifications, we end up calling free_percpu_irq() from
ffa_uninit_pcpu_irq() which results in the following warning:
| genirq: Flags mismatch irq 6. 00004401 (ARM-FFA-NPI) vs. 00004400 (IPI)
| ARM FF-A: Error registering percpu NPI nIRQ 6 : -16
| ARM FF-A: Notification setup failed -16, not enabled
| ------------[ cut here ]------------
| Trying to free already-free IRQ 6
| WARNING: CPU: 2 PID: 1 at kernel/irq/manage.c:2476 __free_percpu_irq+0x6c/0x138
| Modules linked in:
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc3 #211
| Hardware name: FVP Base RevC (DT)
| pstate: 614000c9 (nZCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : __free_percpu_irq+0x6c/0x138
| lr : __free_percpu_irq+0x6c/0x138
| Call trace:
| __free_percpu_irq+0x6c/0x138
| free_percpu_irq+0x48/0x84
| ffa_notifications_cleanup+0x78/0x164
| ffa_notifications_setup+0x368/0x3c0
| ffa_init+0x2b4/0x36c
| do_one_initcall+0xe0/0x258
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x108/0x174
| kernel_init+0x20/0x1a4
| ret_from_fork+0x10/0x20
Fix the same by resetting the stashed copy of IRQ values to 0 in case
of any failure to set them up properly.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240418102932.3093576-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a mechanism to be able to tag vendor protocol modules at compile-time
with a vendor/sub_vendor string and an implementation version and then to
choose to load, at run-time, only those vendor protocol modules matching
as close as possible the vendor/subvendor identification advertised by
the SCMI platform server.
In this way, any in-tree existent vendor protocol module can be build and
shipped by default in a single kernel image, even when using the same
clashing protocol identification numbers, since the SCMI core will take
care at run-time to load only the ones pertinent to the running system.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240418095121.3238820-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
1. A guest/VM running under a hypervisor.
2. An S-EL1 SP running under a S-EL2 SPMC.
The rules that govern the properties of the NPI are the same as the
rules for the SRI with couple of exceptions. Both SRI and NPI can be
supported simultaneously.
The handling of NPI is also same as the handling of notification for the
self/primary VM with ID 0 except the absence of global notification.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-3-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In preparation to support handling of Notification Pending Interrupt(NPI)
in addition to the existing support for Schedule Receiver Interrupt(SRI),
refactor the code around SRI handling so that NPI support can reuse some
of it. This change shouldn't have any functionality impact. It neither
adds the support for NPIs nor changes any SRI support.
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-2-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the FF-A driver is running inside a guest VM under an hypervisor,
the driver/guest VM doesn't have the permission/capability to request
the creation of notification bitmaps. For a VM, the hypervisor reserves
memory for its VM and hypervisor framework notification bitmaps and the
SPMC reserves memory for its SP and SPMC framework notification bitmaps
before the hypervisor initializes it.
The hypervisor does not initialize a VM if memory cannot be reserved
for all its notification bitmaps. So the creation of all the necessary
bitmaps are already done when the driver initialises and hence it can be
skipped. We rely on FFA_FEATURES(FFA_NOTIFICATION_BITMAP_CREATE) to fail
when running in the guest to handle this in the driver.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-1-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The UEFI specification does not make any mention of a maximum variable
name size, so the headers and implementation shouldn't claim that one
exists either.
Comments referring to this limit have been removed or rewritten, as this
is an implementation detail local to the Linux kernel.
Where appropriate, the magic value of 1024 has been replaced with
EFI_VAR_NAME_LEN, as this is used for the efi_variable struct
definition. This in itself does not change any behavior, but should
serve as points of interest when making future changes in the same area.
A related build-time check has been added to ensure that the special
512 byte sized buffer will not overflow with a potentially decreased
EFI_VAR_NAME_LEN.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Deduplicate ->read() callbacks of bin_attributes which are backed by a
simple buffer in memory:
Use the newly introduced sysfs_bin_attr_simple_read() helper instead,
either by referencing it directly or by declaring such bin_attributes
with BIN_ATTR_SIMPLE_RO() or BIN_ATTR_SIMPLE_ADMIN_RO().
Aside from a reduction of LoC, this shaves off a few bytes from vmlinux
(304 bytes on an x86_64 allyesconfig).
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Zhi Wang <zhiwang@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/92ee0a0e83a5a3f3474845db6c8575297698933a.1712410202.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was once a limitation that there could only be one system
reset handler. Due to that we only would register this handler
when a non-standard device tree property was found, else we left
the default handler in place (usually PSCI). Now that we can
have multiple handlers, and TI-SCI reset is always available
in the firmware, register this handler unconditionally.
This priority is left at the default so higher priority handlers
(like PSCI) are still attempted first.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20240326223730.54639-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20240326223730.54639-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
It turns out that while the QSEECOM APP_SEND command has specific fields
for request and response buffers, uefisecapp expects them both to be in
a single memory region. Failure to adhere to this has (so far) resulted
in either no response being written to the response buffer (causing an
EIO to be emitted down the line), the SCM call to fail with EINVAL
(i.e., directly from TZ/firmware), or the device to be hard-reset.
While this issue can be triggered deterministically, in the current form
it seems to happen rather sporadically (which is why it has gone
unnoticed during earlier testing). This is likely due to the two
kzalloc() calls (for request and response) being directly after each
other. Which means that those likely return consecutive regions most of
the time, especially when not much else is going on in the system.
Fix this by allocating a single memory region for both request and
response buffers, properly aligning both structs inside it. This
unfortunately also means that the qcom_scm_qseecom_app_send() interface
needs to be restructured, as it should no longer map the DMA regions
separately. Therefore, move the responsibility of DMA allocation (or
mapping) to the caller.
Fixes: 759e7a2b62 ("firmware: Add support for Qualcomm UEFI Secure Application")
Cc: stable@vger.kernel.org # 6.7
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240406130125.1047436-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A single fix to address the incorrect check of VM ID count for the
global notification in the response received for FFA_NOTIFICATION_INFO_GET()
in the schedule receiver interrupt handler.
-----BEGIN PGP SIGNATURE-----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=cVg4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NSXv
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.9
A single fix to address the incorrect check of VM ID count for the
global notification in the response received for FFA_NOTIFICATION_INFO_GET()
in the schedule receiver interrupt handler.
* tag 'ffa-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
Link: https://lore.kernel.org/r/20240404140339.450509-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of fixes to address wrong fastchannel initialization in powercap
protocol and disable seeking support for SCMI raw debugfs entries.
-----BEGIN PGP SIGNATURE-----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=iYDI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYVTxsACgkQYKtH/8kJ
Uif2ExAAn0h30qQzEk4UN3Cvk+lXPqbjSDRPDb7IXWqF1Sdu7JqSf47EJWnOzURD
113FPynqxnPWppzHFmVmqLM+hO7uj17d5QQglKitS1VZ+Vv0nRUYe7N76g5eUKcA
j3x2DZOTy0zT4bcXv0tiGSu35wo74yg2q7c/e7FHhtNC81cUYdp25SUNptrNgq/1
iPZpRRJ+/Z0WFXVBXPtnQpbXmecFbApWuKZbE5YbotR7FCDNwxH57IlVJqIj2BzY
fcpbSrywSBN320wU0+8SWnfUj5y9V6cBEtrIAZ6u/0AyZ9PMYZcacWJuORBatgzw
fQjvpE0Rqm6ekYerC+zf1okKG4uhac8b1NbL+KSa38ymnKtNL174eIRj9OR5grN3
nOs0rv7i97mqpu0quzhZZ+WADXEk/dH7Gzubl2F7K1Gd1voXrTjUhsDFGeSlZlUW
4oCcnGpeuV7EZOZG5lftQ3SeRoahzq64tomUjVQNBrrmvkiQYR1FwoY3JRyM2FyG
AzNFCwA6DgsmoTTuyj61xeEGTE2LIwkkZ3G1vWKmSbA2QVvmOeOB8L9NjCWtwWfo
FA0p3W7XRLvgxxkzc+2X06EoHUQDEa5tBuiEYcoJz0YIp6IBzHubgyJfVrAtZKKw
fecmwNu74A33M1QPoMdEQhEK5Kmf6hNeUQDKdK/5CCcosr7kcdw=
=4cp1
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.9
Couple of fixes to address wrong fastchannel initialization in powercap
protocol and disable seeking support for SCMI raw debugfs entries.
* tag 'scmi-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
Link: https://lore.kernel.org/r/20240404140306.450330-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dmi_class uses kfree() as the .release function, but that now causes
a warning with clang-16 as it violates control flow integrity (KCFI)
rules:
drivers/firmware/dmi-id.c:174:17: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
174 | .dev_release = (void(*)(struct device *)) kfree,
Add an explicit function to call kfree() instead.
Fixes: 4f5c791a85 ("DMI-based module autoloading")
Link: https://lore.kernel.org/lkml/20240213100238.456912-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set of changes targeting the avs-driver only. No new features, patchset
either fixes or fortifies existing code.
Patchset starts off with a fix for debugbility on ICL+ platforms which I
have forgotten to fixup when providing support for these initially.
The next two address copier module initialization, most importantly,
silence the gcc 'field-spanning write' false-positive.
The following four:
6/13 ASoC: Intel: avs: Replace risky functions with safer variants
7/13 ASoC: Intel: avs: Fix potential integer overflow
8/13 ASoC: Intel: avs: Test result of avs_get_module_entry()
9/13 ASoC: Intel: avs: Remove dead code
address problems found out by Coverity static analysis tool.
The last two worth mentioning are: recommendation from the firmware team
to wake subsystem from D0ix when starting any pipeline -and- shielding
against invalid period/buffer sizes. Audio format shall be taken into
consideration when calculating either of these.
Amadeusz Sławiński (2):
ASoC: Intel: avs: Restore stream decoupling on prepare
ASoC: Intel: avs: Add assert_static to guarantee ABI sizes
Cezary Rojewski (11):
ASoC: Intel: avs: Fix debug-slot offset calculation
ASoC: Intel: avs: Silence false-positive memcpy() warnings
ASoC: Intel: avs: Fix config_length for config-less copiers
ASoC: Intel: avs: Fix ASRC module initialization
ASoC: Intel: avs: Replace risky functions with safer variants
ASoC: Intel: avs: Fix potential integer overflow
ASoC: Intel: avs: Test result of avs_get_module_entry()
ASoC: Intel: avs: Remove dead code
ASoC: Intel: avs: Wake from D0ix when starting streaming
ASoC: Intel: avs: Init debugfs before booting firmware
ASoC: Intel: avs: Rule invalid buffer and period sizes out
sound/soc/intel/avs/avs.h | 1 +
sound/soc/intel/avs/cldma.c | 2 +-
sound/soc/intel/avs/core.c | 4 +--
sound/soc/intel/avs/icl.c | 12 ++++++---
sound/soc/intel/avs/loader.c | 6 +++--
sound/soc/intel/avs/messages.h | 47 ++++++++++++++++++++++++++++++++--
sound/soc/intel/avs/path.c | 13 ++++------
sound/soc/intel/avs/pcm.c | 34 +++++++++++++++++++++++-
sound/soc/intel/avs/probes.c | 14 ++++++----
9 files changed, 109 insertions(+), 24 deletions(-)
--
2.25.1
The buffer used to transfer data over the mailbox interface is mapped
using the client's device. This is incorrect, as the device performing
the DMA transfer is the mailbox itself. Fix it by using the mailbox
controller device instead.
This requires including the mailbox_controller.h header to dereference
the mbox_chan and mbox_controller structures. The header is not meant to
be included by clients. This could be fixed by extending the client API
with a function to access the controller's device.
Fixes: 4e3d60656a ("ARM: bcm2835: Add the Raspberry Pi firmware driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20240326195807.15163-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
A recent rework changed the constant format strings to a local variable,
which causes warnings from clang when -Wformat-security is enabled:
drivers/firmware/arm_scmi/driver.c: In function 'scmi_probe':
drivers/firmware/arm_scmi/driver.c:2936:25: error: format not a string literal and no format arguments [-Werror=format-security]
2936 | dev_err(dev, err_str);
| ^~~~~~~
drivers/firmware/arm_scmi/driver.c:2993:9: error: format not a string literal and no format arguments [-Werror=format-security]
2993 | return dev_err_probe(dev, ret, err_str);
Print these using an explicit "%s" string instead.
Fixes: 3a7d93d1f7 ("firmware: arm_scmi: Use dev_err_probe to bail out")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403111040.3924658-1-arnd@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches factors out some repeated code to clean up
firmware control read/write functions, and removes some redundant
control notification code.
base-commit: f193957b0f
For !OF builds, the qcom_scm_qseecom_allowlist is unused:
drivers/firmware/qcom/qcom_scm.c:1652:34: error: ‘qcom_scm_qseecom_allowlist’ defined but not used [-Werror=unused-const-variable=]
Fixes: 00b1248606 ("firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311191654.S4wlVUrz-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231120185623.338608-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is a common pattern for functions to take and release the DSP
pwr_lock over the cs_dsp calls to read and write firmware controls.
Add wrapper functions to do this sequence so that the calling code can
be simplified to a single function call..
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240325113127.112783-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modules registering driver with coreboot_driver_register() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Moving the .owner setting code to the core this effectively fixes
missing .owner in framebuffer-coreboot, memconsole-coreboot and vpd
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240330-module-owner-coreboot-v1-1-ddba098b6dcf@linaro.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Work around a quirk in a few old (2011-ish) UEFI implementations, where
a call to `GetNextVariableName` with a buffer size larger than 512 bytes
will always return EFI_INVALID_PARAMETER.
This was already done to efivarfs in commit f45812cc23 ("efivarfs:
Request at most 512 bytes for variable names"), but the second copy of
the variable iteration implementation was overlooked.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit
8117961d98fb2 ("x86/efi: Disregard setup header of loaded image")
dropped the memcopy of the image's setup header into the boot_params
struct provided to the core kernel, on the basis that EFI boot does not
need it and should rely only on a single protocol to interface with the
boot chain. It is also a prerequisite for being able to increase the
section alignment to 4k, which is needed to enable memory protections
when running in the boot services.
So only the setup_header fields that matter to the core kernel are
populated explicitly, and everything else is ignored. One thing was
overlooked, though: the initrd_addr_max field in the setup_header is not
used by the core kernel, but it is used by the EFI stub itself when it
loads the initrd, where its default value of INT_MAX is used as the soft
limit for memory allocation.
This means that, in the old situation, the initrd was virtually always
loaded in the lower 2G of memory, but now, due to initrd_addr_max being
0x0, the initrd may end up anywhere in memory. This should not be an
issue principle, as most systems can deal with this fine. However, it
does appear to tickle some problems in older UEFI implementations, where
the memory ends up being corrupted, resulting in errors when unpacking
the initramfs.
So set the initrd_addr_max field to INT_MAX like it was before.
Fixes: 8117961d98fb2 ("x86/efi: Disregard setup header of loaded image")
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid a type mismatch warning in max() by switching to max_t() and
providing the type explicitly.
Fixes: 3cb4a48275 ("efi/libstub: fix efi_random_alloc() ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Improve the error logging in the driver probe failure paths.
Also use dev_err_probe which is probe error check and log helper to
prevent logging in case of probe deferral.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240325204620.1437237-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Unregistering SCMI notifications using the managed devres interface can be
done providing as a reference simply the previously successfully registered
notification block since it could have been registered only on one kernel
notification_chain: drop any reference to SCMI protocol, events and
sources.
Devres internal helpers can search for the provided notification block
reference and, once found, the associated devres object will already
provide the above SCMI references for the event.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240325204620.1437237-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
It is useful to have message dump traces for any invalid/bad/unexpected
replies. Let us add traces for the same as well as late-timed-out,
out-of-order and unexpected/spurious messages.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240325204620.1437237-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Upon reception of malformed and unexpected timed-out SCMI messages, it is
not possible to trace those bad messages in their entirety, because usually
we cannot even retrieve the payload, or it is just not reliable.
Add a helper to trace at least the content of the header of the received
message while associating a meaningful tag and error code.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240325204620.1437237-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, the performance domain names are not logged whenever any
error occurs when processing the OPPs by adding to local data structures
or to the OPP library.
It would be easier to locate the problem if domain name is printed out.
So let us add the performance domain names to the other information
logged already in the error paths.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240322080531.3365016-1-peng.fan@oss.nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI raw debugfs entries are used to inject and snoop messages out of the
SCMI core and, as such, the underlying virtual files have no reason to
support seeking.
Modify the related file_operations descriptors to be non-seekable.
Fixes: 3c3d818a93 ("firmware: arm_scmi: Add core raw transmission support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240315140324.231830-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fastchannels are initialized with an incorrect index(POWERCAP_PAI_GET) in:
commit 2441caa84a ("firmware: arm_scmi: Populate fast channel rate_limit")
Fix this and provide a correct index(POWERCAP_FC_PAI)
Fixes: 2441caa84a ("firmware: arm_scmi: Populate fast channel rate_limit")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202403100744.7Op3PI8L-lkp@intel.com/
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20240311090413.1710725-1-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FFA_NOTIFICATION_INFO_GET retrieves information about pending
notifications. Notifications can be either global or per VCPU. Global
notifications are reported with the partition ID only in the list of
endpoints with pending notifications. ffa_notification_info_get()
incorrectly expect no ID at all for global notifications. Fix this by
checking for ID = 1 instead of ID = 0.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240311110700.2367142-1-jens.wiklander@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZgCRgwAKCRAwbglWLn0t
XHozAP9jLdeGs1ReYZAn+W0QtW/SJHJznoPiHcktdNKG4rNX3QD9G3URu0f4jKCG
yvjw8qHM1pC2cihXXjABjf7gL7g6LAE=
=cNP7
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.
Tested with QEMU and OVMF firmware.
Fixes: bad267f9e1 ("efi: verify that variable services are supported")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.
So make the memset() conditional on whether the EFI stub is running in
native mode.
Fixes: b3810c5a2c ("x86/efistub: Clear decompressor BSS in native EFI entrypoint")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver
(Geert Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZfx/jAAKCRD3ErUQojoP
XxYoAP9EYvCtd+nxlUvnhS4fXUeTCXZJQA+HiXCORm6DGv7lUgD9EatR9b69CLA3
e4LgzGS/9cybv3uUd3S5lFxsatGZnA8=
=DQZN
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver (Geert
Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
* tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: panel-tpo-td043mtea1: Convert sprintf() to sysfs_emit()
fbmon: prevent division by zero in fb_videomode_from_videomode()
fbcon: Increase maximum font width x height to 64 x 128
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
fbdev: mb862xxfb: Fix defined but not used error
fbdev: uvesafb: Convert sprintf/snprintf to sysfs_emit
fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH
Following warning is sometimes observed while booting my servers:
[ 3.594838] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 3.602918] swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0-1
...
[ 3.851862] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
If 'nokaslr' boot option is set, the warning always happens.
On x86, ZONE_DMA is small zone at the first 16MB of physical address
space. When this problem happens, most of that space seems to be used by
decompressed kernel. Thereby, there is not enough space at DMA_ZONE to
meet the request of DMA pool allocation.
The commit 2f77465b05 ("x86/efistub: Avoid placing the kernel below
LOAD_PHYSICAL_ADDR") tried to fix this problem by introducing lower
bound of allocation.
But the fix is not complete.
efi_random_alloc() allocates pages by following steps.
1. Count total available slots ('total_slots')
2. Select a slot ('target_slot') to allocate randomly
3. Calculate a starting address ('target') to be included target_slot
4. Allocate pages, which starting address is 'target'
In step 1, 'alloc_min' is used to offset the starting address of memory
chunk. But in step 3 'alloc_min' is not considered at all. As the
result, 'target' can be miscalculated and become lower than 'alloc_min'.
When KASLR is disabled, 'target_slot' is always 0 and the problem
happens everytime if the EFI memory map of the system meets the
condition.
Fix this problem by calculating 'target' considering 'alloc_min'.
Cc: linux-efi@vger.kernel.org
Cc: Tom Englund <tomenglund26@gmail.com>
Cc: linux-kernel@vger.kernel.org
Fixes: 2f77465b05 ("x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR")
Signed-off-by: Kazuma Kondo <kazuma-kondo@nec.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwsHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynT4ACePcNRAsYrINlOPPKPHimJtyP01yEAn0pZYnj2
0/UpqIqf3HVPu7zsLKTa
=vR9S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues"
* tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
device: core: Log warning for devices pending deferred probe on timeout
driver: core: Use dev_* instead of pr_* so device metadata is added
driver: core: Log probe failure as error and with device metadata
of: property: fw_devlink: Add support for "post-init-providers" property
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
driver core: Adds flags param to fwnode_link_add()
debugfs: fix wait/cancellation handling during remove
device property: Don't use "proxy" headers
device property: Move enum dev_dma_attr to fwnode.h
driver core: Move fw_devlink stuff to where it belongs
driver core: Drop unneeded 'extern' keyword in fwnode.h
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group.
firmware_loader: introduce __free() cleanup hanler
platform-msi: Remove usage of the deprecated ida_simple_xx() API
sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE()
sysfs: Document new "group visible" helpers
sysfs: Fix crash on empty group attributes array
sysfs: Introduce a mechanism to hide static attribute_groups
sysfs: Introduce a mechanism to hide static attribute_groups
...
Here is the big set of char/misc and a number of other driver subsystem
updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning with some older versions of gcc for a
speakup driver, fix for that will come in a few days when I catch up
with my pending patch queues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwuLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynKVACgjvR1cD8NYk9PcGWc9ZaXAZ6zSnwAn260kMoe
lLFtwszo7m0N6ZULBWBd
=y3yz
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
- Modify the Energy Model code to bail out and complain if the unit of
power is not uW to prevent errors due to unit mismatches (Lukasz Luba).
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König).
- Fix typo in the suspend and interrupts document (Saravana Kannan).
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar).
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar).
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski).
-----BEGIN PGP SIGNATURE-----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=dlQ/
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the Energy Model to make it prevent errors due to power
unit mismatches, fix a typo in power management documentation, convert
one driver to using a platform remove callback returning void, address
two cpufreq issues (one in the core and one in the DT driver), and
enable boost support in the SCMI cpufreq driver.
Specifics:
- Modify the Energy Model code to bail out and complain if the unit
of power is not uW to prevent errors due to unit mismatches (Lukasz
Luba)
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König)
- Fix typo in the suspend and interrupts document (Saravana Kannan)
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar)
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar)
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski)"
* tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Enable boost support
firmware: arm_scmi: Add support for marking certain frequencies as turbo
cpufreq: dt: always allocate zeroed cpumask
cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()
Documentation: power: Fix typo in suspend and interrupts doc
PM: EM: Force device drivers to provide power in uW
powercap: intel_rapl: Convert to platform remove callback returning void
- Explicitly wipe BSS in the native EFI entrypoint, so that globals
shared with the legacy decompressor are zero-initialized correctly.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZfamQgAKCRAwbglWLn0t
XHK9AP9tfaBRi2v3ee5DONWc6cAIg2UUJtZABsWjo6M1HJjQjQD/cKKG3F9jo9L/
jJ890WGNpDTN8KJJ7GWDA41UQ/zucAI=
=fIHG
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This fixes an oversight on my part in the recent EFI stub rework for
x86, which is needed to get Linux/x86 distro builds signed again for
secure boot by Microsoft. For this reason, most of this work is being
backported to v6.1, which is therefore also affected by this
regression.
- Explicitly wipe BSS in the native EFI entrypoint, so that globals
shared with the legacy decompressor are zero-initialized correctly"
* tag 'efi-fixes-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Clear decompressor BSS in native EFI entrypoint
Since the qcom_scm_probe() function returns with an error if
__scm->path contains an error pointer, it is not needed to
verify that again in the qcom_scm_bw_{en,dis}able() functions
so remove the superfluous IS_ERR() checks.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240308-qcom_scm-is_err-check-v1-1-9c3e1ceefafe@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are several functions which are calling qcom_scm_bw_enable()
then returns immediately if the call fails and leaves the clocks
enabled.
Change the code of these functions to disable clocks when the
qcom_scm_bw_enable() call fails. This also fixes a possible dma
buffer leak in the qcom_scm_pas_init_image() function.
Compile tested only due to lack of hardware with interconnect
support.
Cc: stable@vger.kernel.org
Fixes: 65b7ebda50 ("firmware: qcom_scm: Add bw voting support to the SCM interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240304-qcom-scm-disable-clk-v1-1-b36e51577ca1@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
By using bitmaps we actually support whatever size we would want, but
the console currently limits fonts to 64x128 (which gives 60x16 text on
4k screens), so we don't need more for now, and we can easily increase
later.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The EFI stub on x86 no longer invokes the decompressor as a subsequent
boot stage, but calls into the decompression code directly while running
in the context of the EFI boot services.
This means that when using the native EFI entrypoint (as opposed to the
EFI handover protocol, which clears BSS explicitly), the firmware PE
image loader is being relied upon to ensure that BSS is zeroed before
the EFI stub is entered from the firmware.
As Radek's report proves, this is a bad idea. Not all loaders do this
correctly, which means some global variables that should be statically
initialized to 0x0 may have junk in them.
So clear BSS explicitly when entering via efi_pe_entry(). Note that
zeroing BSS from C code is not generally safe, but in this case, the
following assignment and dereference of a global pointer variable
ensures that the memset() cannot be deferred or reordered.
Cc: <stable@kernel.org> # v6.1+
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- zero initialize a cpumask (Marek Szyprowski).
- Boost support for scmi cpufreq driver (Sibi Sankar).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmXz4jQACgkQ0rkcPK6B
EhyudA//TXts7AyJcdrxe0YqT02LnD1KApRgvdZZGd1/LE16STjyKzpyLZ5RgTQa
4lvrRrd/zKmxHFJU+WKh15zGiXNT3QvPXT2dZHM3ZzXxKKxvkzLIhpv81Q9d5y9b
kEt8x9QQxCGBe5iXL0Dy1t0d4wJ3H/OqSxQmQluT6ge6ZPfb+C9NaxnR7rLaJlQf
Yphvc9I4MBQdnnlYuYDfRzkmUSxi+oKudXbfKsVu2Qnirv/gi25ARmYlpvbA9Os5
EP+A47O6+nf9PGJGqB/R67Mzb2l21Mo2WvyshIEDMmBZ3dBVMvL1ZNcputie3gxx
qNfyOyE61dGp+lCj7QYpUMLvSAROnJSlucEIa5kanGUTbIsrn/Xx+5BJjbzQT/0W
O9wjgaskTP4CgUh79mqHm4DFWNp4RWxMpeRMDn9fPx3r4PrX9klWWNgFAch4NLWf
BssbnzoP8PF1m8780ZmCk811/SpvTBT8AbGlH8faNmhLewLDRCrnXsxCg5KEh5P6
qfWDZihG0S6MuNgsSqS+Y5FsuYyLtrmiu1O7jviiN3FD0/3p3jVMRin9EOsVQY5i
4WVI9Rf/K3YrZvka6zqBU+di8l32HncoEtRJhCreL+N1dBfKU974yl+rw4Oxv3Qp
wZJz5tjCdWQWntfpMmU6mP0to607yvmGIE7ajAAE3g8i3mDsSu4=
=miRv
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge more ARM cpufreq updates for 6.9 from Viresh Kumar:
"- zero initialize a cpumask (Marek Szyprowski).
- Boost support for scmi cpufreq driver (Sibi Sankar)."
* tag 'cpufreq-arm-updates-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Enable boost support
firmware: arm_scmi: Add support for marking certain frequencies as turbo
cpufreq: dt: always allocate zeroed cpumask
All opps above the sustained frequency are treated as turbo, so mark them
accordingly.
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA
jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh
tKVmvihFxfAhdDthseXcIf1nBjMALwY=
=8rVc
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup
and locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates
-----BEGIN PGP SIGNATURE-----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=h9kz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
-----BEGIN PGP SIGNATURE-----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=AP3I
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support
-----BEGIN PGP SIGNATURE-----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=WLj9
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZe9ZfQAKCRAwbglWLn0t
XKA3AQCLEZB8cFifk0pIItUCbSLfplJsS926AgknvwLYSRn8WAEA/WHZ+42TTiPy
w2U8zmhaqzmqWtwrwjjMUmoap90KYwA=
=4NVe
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
* tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
virt: efi_secret: Convert to platform remove callback returning void
x86/efistub: Remap kernel text read-only before dropping NX attribute
efi/libstub: Add get_event_log() support for CC platforms
efi/libstub: Measure into CC protocol if TCG2 protocol is absent
efi/libstub: Add Confidential Computing (CC) measurement typedefs
efi/tpm: Use symbolic GUID name from spec for final events table
efi/libstub: Use TPM event typedefs from the TCG PC Client spec
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
* Improvements
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents.
* Misc
- Make bus_type const.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZe5rkxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz09TIBAPceKZPzZbShXTkiJAEOVi++rxVppFuB
0BV2NqS6b+pBAPwItU5OiQaSUg6PsJNHAHHiJSi6jQ4w7tAdkpfOBlW1Cg==
=5dkP
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents
- Make bus_type const
* tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Replace tag with id table in driver struct
firmware: coreboot: Generate aliases for coreboot modules
firmware: coreboot: Generate modalias uevent for devices
firmware: coreboot: make coreboot_bus_type const
- Make PSTORE_RAM available by default on arm64 (Nícolas F. R. A. Prado)
- Allow for dynamic initialization in modular build (Guilherme G. Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
-----BEGIN PGP SIGNATURE-----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=xe9R
-----END PGP SIGNATURE-----
Merge tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Make PSTORE_RAM available by default on arm64 (Nícolas F R A Prado)
- Allow for dynamic initialization in modular build (Guilherme G
Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
* tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/zone: Don't clear memory twice
pstore/zone: Add a null pointer check to the psz_kmsg_read
efi: pstore: Allow dynamic initialization based on module parameter
arm64: defconfig: Enable PSTORE_RAM
pstore/ram: Register to module device table
pstore: inode: Only d_invalidate() is needed
This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code.
- Feature updates for Tegra and Qualcomm platforms for added
hardware support.
- A number of platforms get soc_device additions for identifying newly
added chips from Renesas, Qualcomm, Mediatek and Google.
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems.
-----BEGIN PGP SIGNATURE-----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=bV/K
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:
38b334fc76 Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus has resolved the conflicting placement of 'cc_mask' better
than the original commit:
1c811d403a x86/sev: Fix position dependent variable references in startup code
... which was also done by an internal merge resolution:
2e5fc4786b Merge branch 'x86/sev' into x86/boot, to resolve conflicts and to pick up dependent tree
But Linus is right in 38b334fc76, the 'cc_mask' declaration is sufficient
within the #ifdef CONFIG_ARCH_HAS_CC_PLATFORM block.
So instead of forcing Linus to do the same resolution again, merge in Linus's
tree and follow his conflict resolution.
Conflicts:
arch/x86/include/asm/coco.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- General enhancements / cleanups to cpufreq drivers (tianyu2, Nícolas
F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- scmi: get transition delay from firmware (Pierre Gondois).
-----BEGIN PGP SIGNATURE-----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=Hu43
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.9 from Viresh Kumar:
"- General enhancements / cleanups to cpufreq drivers (tianyu2, Nícolas
F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- scmi: get transition delay from firmware (Pierre Gondois)."
* tag 'cpufreq-arm-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
cpufreq: dt-platdev: block SDM670 in cpufreq-dt-platdev
cpufreq: mediatek-hw: Don't error out if supply is not found
Documentation: power: Use kcalloc() instead of kzalloc()
cpufreq: mediatek-hw: Wait for CPU supplies before probing
cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value
cpufreq: imx6: use regmap to read ocotp register
Currently, the EFI stub invokes the EFI memory attributes protocol to
strip any NX restrictions from the entire loaded kernel, resulting in
all code and data being mapped read-write-execute.
The point of the EFI memory attributes protocol is to remove the need
for all memory allocations to be mapped with both write and execute
permissions by default, and make it the OS loader's responsibility to
transition data mappings to code mappings where appropriate.
Even though the UEFI specification does not appear to leave room for
denying memory attribute changes based on security policy, let's be
cautious and avoid relying on the ability to create read-write-execute
mappings. This is trivially achievable, given that the amount of kernel
code executing via the firmware's 1:1 mapping is rather small and
limited to the .head.text region. So let's drop the NX restrictions only
on that subregion, but not before remapping it as read-only first.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To allow event log info access after boot, EFI boot stub extracts
the event log information and installs it in an EFI configuration
table. Currently, EFI boot stub only supports installation of event
log only for TPM 1.2 and TPM 2.0 protocols. Extend the same support
for CC protocol. Since CC platform also uses TCG2 format, reuse TPM2
support code as much as possible.
Link: https://uefi.org/specs/UEFI/2.10/38_Confidential_Computing.html#efi-cc-measurement-protocol [1]
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lkml.kernel.org/r/0229a87e-fb19-4dad-99fc-4afd7ed4099a%40collabora.com
[ardb: Split out final events table handling to avoid version confusion]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To accommodate confidential compute VMs that expose the simplified CC
measurement protocol instead of the full-blown TCG2 one, fall back to
the former if the latter does not exist.
The CC protocol was designed to be used in this manner, which is why the
types and prototypes have been kept the same where possible. So reuse
the existing code, and only deviate from the TCG2 code path where
needed.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
If the virtual firmware implements TPM support, TCG2 protocol will be
used for kernel measurements and event logging support. But in CC
environment, not all platforms support or enable the TPM feature. UEFI
specification [1] exposes protocol and interfaces used for kernel
measurements in CC platforms without TPM support.
More details about the EFI CC measurements and logging can be found
in [1].
Link: https://uefi.org/specs/UEFI/2.10/38_Confidential_Computing.html#efi-cc-measurement-protocol [1]
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[ardb: Drop code changes, keep typedefs and #define's only]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The LINUX_EFI_ GUID identifiers are only intended to be used to refer to
GUIDs that are part of the Linux implementation, and are not considered
external ABI. (Famous last words).
GUIDs that already have a symbolic name in the spec should use that
name, to avoid confusion between firmware components. So use the
official name EFI_TCG2_FINAL_EVENTS_TABLE_GUID for the TCG2 'final
events' configuration table.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Our efi_tcg2_tagged_event is not defined in the EFI spec, but it is not
a local invention either: it was taken from the TCG PC Client spec,
where it is called TCG_PCClientTaggedEvent.
Note that this spec also contains some guidance on how to populate it,
which is not being followed closely at the moment; it claims that the
event size should cover the TCG_PCClientTaggedEvent and its payload
only, but it currently covers the preceding efi_tcg2_event too.
However, this directly contradicts the TCG EFI protocol specification,
which states very clearly that the event size should cover the entire
data structure, including the leading efi_tcg2_event_t struct.
So rename the struct and document its provenance, but retain the
existing logic to populate the size field.
Link: https://lore.kernel.org/all/20240308085754.476197-8-ardb+git@google.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Both AER and DPC RP PIO provide TLP Header Log registers (PCIe r6.1 secs
7.8.4 & 7.9.14) to convey error diagnostics but the struct is named after
AER as the struct aer_header_log_regs. Also, not all places that handle TLP
Header Log use the struct and the struct members are named individually.
Generalize the struct name and members, and use it consistently where TLP
Header Log is being handled so that a pcie_read_tlp_log() helper can be
easily added.
Link: https://lore.kernel.org/r/20240206135717.8565-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop ixgbe changes for now, tidy whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Allow the callers to set fwnode link flags when adding fwnode links.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize debugfs_root to -ENODEV so that if the client never sets a
valid debugfs root the debugfs files will not be created.
A NULL pointer passed to any of the debugfs_create_*() functions means
"create in the root of debugfs". It doesn't mean "ignore".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240307105353.40067-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A single minor fix for an oversized allocation due to sizeof() misuse by
yours truly that came in since I sent my last fixes PR.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZed5RAAKCRB4tDGHoIJi
0qRIAQCeMKuoQNOHXQtC3u5FKGcpsZPctEnbhg2pWK6ZOwdqjwEAsEJLqApFw4cG
oB9cR3O3mtN49aOBM3w700Hafykv9Ak=
=oU9U
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXoEEAACgkQYKtH/8kJ
Uic1PRAAr/Fc1qOB6gp05NPqXDuHvFGU/qYCMINss8n33mXuyfG3HnR8YBoybEnH
mm0cpVn1VqsJbixiM1d07/luRfBZXiMCQw55UNwbU7PVyBHc9at9QnruYX4uFRsZ
V6AgTkni1QDDMYANFgvs9dJv+r4Ul1gusqSj/z71an/A6d2fmsVXlFkH7ZXsGhGR
PJR5NDLjuqJIR2kGKC23QvrQWY+Kuf90+6FExVOc/3ZnUS5Eg0QrbBf1vd8JYz+o
wNR/IeHO9anvoe1tSNJDpHDdCKl+88SiJGjUcMI/H4ncdkGslBuErzBB2cwRHWWC
JHD4ZbAB5qFNHaZqUTAuHkAyMdZEPxibDdtW084thD8X7vFJe27JuRXfMJTHWRKt
jemhC9mcZ/lEM1neShSZe7jdQLzzjEEdNSDe4dcMihstGu3yHDXuhzzf6AxXh5bU
GvihHMQ4ENnNSUgSDC6FcW+HOaakBL728JE6ySAIP/7mSICF9MVasyT+NO0DLTEC
67rmGoealy2c//dmtcslYDQzeFbaNtL4FpLVkc1uFotQ5FFHsXzbwkETAZOWZwbL
0nT5OnpdixwB2389RbAwXVrpstrgjYxRwKehNGa8LgIxKcsYVtROLRiwTs474g6a
PsYTW7GfCJg+SsT1A4cZ7sV8lP3cn5WwewZ+0lRjSTmdWgIQ294=
=OVem
-----END PGP SIGNATURE-----
Merge tag 'riscv-firmware-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V firmware drivers for v6.9
A single minor fix for an oversized allocation due to sizeof() misuse by
yours truly that came in since I sent my last fixes PR.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: Fix over-requested allocation size
Link: https://lore.kernel.org/r/20240305-vicinity-dumpling-8943ef26f004@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI spec. v3.2, s4.5.3.12 PERFORMANCE_DESCRIBE_FASTCHANNEL
defines a per-domain rate_limit for performance requests:
"""
Rate Limit in microseconds, indicating the minimum time
required between successive requests. A value of 0
indicates that this field is not applicable or supported
on the platform.
""""
The field is first defined in SCMI v2.0.
Add support to fetch this value and advertise it through
a fast_switch_rate_limit() callback.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Arm SCMI spec. v3.2, s4.5.3.4 PERFORMANCE_DOMAIN_ATTRIBUTES
defines a per-domain rate_limit for performance requests:
"""
Rate Limit in microseconds, indicating the minimum time
required between successive requests. A value of 0
indicates that this field is not supported by the
platform. This field does not apply to FastChannels.
""""
The field is first defined in SCMI v1.0.
Add support to fetch this value and advertise it through
a rate_limit_get() callback.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cocci warnings: (new ones prefixed by >>)
>> drivers/firmware/microchip/mpfs-auto-update.c:387:72-78:
ERROR: application of sizeof to pointer
drivers/firmware/microchip/mpfs-auto-update.c:170:72-78:
ERROR: application of sizeof to pointer
response_msg is a pointer to u32, so the size of element it points to is
supposed to be a multiple of sizeof(u32), rather than sizeof(u32 *).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403040516.CYxoWTXw-lkp@intel.com/
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The early SME/SEV code parses the command line very early, in order to
decide whether or not memory encryption should be enabled, which needs
to occur even before the initial page tables are created.
This is problematic for a number of reasons:
- this early code runs from the 1:1 mapping provided by the decompressor
or firmware, which uses a different translation than the one assumed by
the linker, and so the code needs to be built in a special way;
- parsing external input while the entire kernel image is still mapped
writable is a bad idea in general, and really does not belong in
security minded code;
- the current code ignores the built-in command line entirely (although
this appears to be the case for the entire decompressor)
Given that the decompressor/EFI stub is an intrinsic part of the x86
bootable kernel image, move the command line parsing there and out of
the core kernel. This removes the need to build lib/cmdline.o in a
special way, or to use RIP-relative LEA instructions in inline asm
blocks.
This involves a new xloadflag in the setup header to indicate
that mem_encrypt=on appeared on the kernel command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240227151907.387873-17-ardb+git@google.com
Parse the mem_encrypt= command line parameter from the EFI stub if
CONFIG_ARCH_HAS_MEM_ENCRYPT=y, so that it can be passed to the early
boot code by the arch code in the stub.
This avoids the need for the core kernel to do any string parsing very
early in the boot.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240227151907.387873-16-ardb+git@google.com
Quite a few changes to extend support to SCMI v3.2 specification,
to enhance notification handling and other miscellaneous updates.
1. Enhancements to notification handling
Until now, trying to register a notifier for an unsuppported
notification returned an error genrating unneeded message exchanges
with the SCMI platform. This can be avoided by looking up in advance
the specific protocol and resources available.
With these changes SCMI driver user will fail to register a notifier
if the related command or resource is not supported (like before)
without the need of exchanging any message.
Perf notifications are also extended to provide the pre-calculated
frequencies corresponding to the level or index carried by the
2. More SCMI v3.2 related updates
One of the main addition includes a centralized support to the SCMI
core to handle v3.2 optional protocol version negotiation, so that
at protocol initialization time, if the platform advertised version
is newer than supported by the kernel and protocol version negotiation
is supported, the SCMI core will attempt to negotiate an older protocol
version.
It also includes the clock get permissions which indicates if any of
the clock operations are forbidden by the platform for the OSPM agent.
It can be used in the clock driver to avoid unnecessary message
exchanges between the kernel and the platform which will always end
up with the failure. It also includes other missing bits of clock
v3.2 protocol so that the supported protocol version can be bumped
to 0x30000 (v3.2).
3. Miscellaneous updates
This includes addition of warning if the domain frequency multiplier
is 0 or rounded off to indicate the actual frequencies are either
wrong ot rounded off, hardening of clock domain info lookups, addition
of multiple protocols registration support within a SCMI driver,
update to SCMI entry in MAINTAINERS to include HWMON driver and
constifying the scmi_bus_type structure.
This also includes couple for fixes to minor issues: double free in
SMC transport cleanup path and struct kernel-doc warnings in optee
transport.
-----BEGIN PGP SIGNATURE-----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=RpCe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X90P
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.9
Quite a few changes to extend support to SCMI v3.2 specification,
to enhance notification handling and other miscellaneous updates.
1. Enhancements to notification handling
Until now, trying to register a notifier for an unsuppported
notification returned an error genrating unneeded message exchanges
with the SCMI platform. This can be avoided by looking up in advance
the specific protocol and resources available.
With these changes SCMI driver user will fail to register a notifier
if the related command or resource is not supported (like before)
without the need of exchanging any message.
Perf notifications are also extended to provide the pre-calculated
frequencies corresponding to the level or index carried by the
2. More SCMI v3.2 related updates
One of the main addition includes a centralized support to the SCMI
core to handle v3.2 optional protocol version negotiation, so that
at protocol initialization time, if the platform advertised version
is newer than supported by the kernel and protocol version negotiation
is supported, the SCMI core will attempt to negotiate an older protocol
version.
It also includes the clock get permissions which indicates if any of
the clock operations are forbidden by the platform for the OSPM agent.
It can be used in the clock driver to avoid unnecessary message
exchanges between the kernel and the platform which will always end
up with the failure. It also includes other missing bits of clock
v3.2 protocol so that the supported protocol version can be bumped
to 0x30000 (v3.2).
3. Miscellaneous updates
This includes addition of warning if the domain frequency multiplier
is 0 or rounded off to indicate the actual frequencies are either
wrong ot rounded off, hardening of clock domain info lookups, addition
of multiple protocols registration support within a SCMI driver,
update to SCMI entry in MAINTAINERS to include HWMON driver and
constifying the scmi_bus_type structure.
This also includes couple for fixes to minor issues: double free in
SMC transport cleanup path and struct kernel-doc warnings in optee
transport.
* tag 'scmi-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (29 commits)
MAINTAINERS: Update SCMI entry with HWMON driver
firmware: arm_scmi: Update the supported clock protocol version
firmware: arm_scmi: Add standard clock OEM definitions
firmware: arm_scmi: Add clock check for extended config support
firmware: arm_scmi: Add support for v3.2 NEGOTIATE_PROTOCOL_VERSION
firmware: arm_scmi: Fix struct kernel-doc warnings in optee transport
firmware: arm_scmi: Report frequencies in the perf notifications
firmware: arm_scmi: Use opps_by_lvl to store opps
firmware: arm_scmi: Implement is_notify_supported callback in powercap protocol
firmware: arm_scmi: Implement is_notify_supported callback in reset protocol
firmware: arm_scmi: Implement is_notify_supported callback in sensor protocol
firmware: arm_scmi: Implement is_notify_supported callback in clock protocol
firmware: arm_scmi: Implement is_notify_supported callback in system power protocol
firmware: arm_scmi: Implement is_notify_supported callback in power protocol
firmware: arm_scmi: Implement is_notify_supported callback in perf protocol
firmware: arm_scmi: Add a common helper to check if a message is supported
firmware: arm_scmi: Check for notification support
firmware: arm_scmi: Make scmi_bus_type const
firmware: arm_scmi: Fix double free in SMC transport cleanup path
firmware: arm_scmi: Implement clock get permissions
...
Link: https://lore.kernel.org/r/20240223033435.118028-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix phys_addr_t size confusion in 32-bit capsule loader
- Reduce maximum EFI variable name size to 512 to work around buggy
firmware
- Drop some redundant code from efivarfs while at it
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZdr/HgAKCRAwbglWLn0t
XGqrAP96SmiLbkEBzBAkjpIvQIwoiPUAQmfBXs4PuZ6MH/aq3wEA0VOxxH8CpVAu
dpjd2HIjO59zMr4G7BvR/ezit3Gp2A0=
=Bd3Z
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Only the EFI variable name size change is significant, and will be
backported once it lands. The others are cleanup.
- Fix phys_addr_t size confusion in 32-bit capsule loader
- Reduce maximum EFI variable name size to 512 to work around buggy
firmware
- Drop some redundant code from efivarfs while at it"
* tag 'efi-fixes-for-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Drop 'duplicates' bool parameter on efivar_init()
efivarfs: Drop redundant cleanup on fill_super() failure
efivarfs: Request at most 512 bytes for variable names
efi/capsule-loader: fix incorrect allocation size
This error path accidentally returns success when it should preserve the
error code from sysfb_parent_dev().
Fixes: 4e754597d6 ("firmware/sysfb: Create firmware device only for enabled PCI devices")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/aaaa2e13-849b-41a0-8186-25f3d2a16f86@moroto.mountain
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94
8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C
Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT
mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe
1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi
b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4
1euINlY=
=7IFt
-----END PGP SIGNATURE-----
Merge v6.8-rc6 into drm-next
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LLVM moved their issue tracker from their own Bugzilla instance to GitHub
issues. While all of the links are still valid, they may not necessarily
show the most up to date information around the issues, as all updates
will occur on GitHub, not Bugzilla.
Another complication is that the Bugzilla issue number is not always the
same as the GitHub issue number. Thankfully, LLVM maintains this mapping
through two shortlinks:
https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num>
https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num>
Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the
"https://llvm.org/pr<num>" shortlink so that the links show the most up to
date information. Each migrated issue links back to the Bugzilla entry,
so there should be no loss of fidelity of information here.
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-3-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The efi-pstore module parameter "pstore_disable" warrants that users
are able to deactivate such backend. There is also a Kconfig option
for the default value of this parameter. It was originally added due
to some bad UEFI FW implementations that could break with many variables
written.
Some distros (such as Arch Linux) set this in their config file still
nowadays. And once it is set, even being a writable module parameter,
there is effectively no way to make use of efi-pstore anymore.
If "pstore_disable" is set to true, the init function of the module exits
early and is never called again after the initcall processing.
Let's switch this module parameter to have a callback and perform the
pstore backend registration again each time it's set from Y->N (and
vice-versa). With this, the writable nature of the parameter starts to
make sense, given that users now can switch back to using efi-pstore
or not during runtime by writing into it.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20240103184053.226203-1-gpiccoli@igalia.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a common enum to define the standard clock OEM types defined by the
SCMI specification, so as to enable the configuration of such extended
configuration properties with the existent clock protocol operations.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240214183006.3403207-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI v3.2 added support to set/get clock custom OEM types; such support is
conditionally present, though, depending on an extended config attribute
bit possibly advertised by the platform server on a per-domain base.
Add a check to verify if OEM types are supported before allowing any kind
of OEM-specific get/set operation. Also add a check around all the new
v3.2 clock features.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240214183006.3403207-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Freshly introduced NEGOTIATE_PROTOCOL_VERSION allows the agent to ascertain
upfront if a specific protocol(usually older) version is supported by the
platform.
It is used by the agent in case the platform has advertised the support of
a newer protocol version than the latest version supported by the agent,
since backward compatibility cannot be automatically assumed.
Emit a warning about possible incompatibility when negotiation was not
possible or just print the successfully negotiated protocol.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240214183006.3403207-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fix the kernel-doc notation for the nested union in struct
scmi_optee_channel to eliminate kernel-doc warnings:
| optee.c:130: warning: Excess struct member 'shmem' description
| in 'scmi_optee_channel'
| optee.c:131: warning: Function parameter or struct member 'req'
| not described in 'scmi_optee_channel'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240221062157.8694-1-rdunlap@infradead.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The kfree() function was called in one case by
the get_filename() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
Thus return directly after a call of the function “kzalloc” failed
at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend the perf notification report to include pre-calculated frequencies
corresponding to the reported limits/levels event; such frequencies are
properly computed based on the stored known OPPs information taking into
consideration if the current operating mode is level indexed or not.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-12-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Store all the discovered OPPs into the XArray opps_by_lvl even when
level_indexing mode is not used, since it comes handy to easily retrieve
OPPs by level.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-11-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the powercap protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-10-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the reset protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-9-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the sensor protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-8-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the clock protocol related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-7-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Now that the driver core can properly handle constant struct bus_type,
move the ffa_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240211-bus_cleanup-firmware2-v1-1-1851c92c7be7@marliere.net
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the system power protocol related
notify enable commands are supported at all by the SCMI platform, and
then provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain supports
notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the power related notify enable
commands are supported at all by the SCMI platform, and then provide
the callback needed to allow the core SCMI notification subsytem to do
a fine-grain check if a specific resource domain supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a preliminary check to verify if the performance related notify
enable commands are supported at all by the SCMI platform, and then
provide the callback needed to allow the core SCMI notification
subsytem to do a fine-grain check if a specific resource domain
supports notifications.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When registering protocol events, use the optional .is_notify_supported
callback provided by the protocol to check if that specific notification
type is available for that particular resource on the running system,
marking it as unsupported otherwise.
Then, when a notification enable request is received, return an error if
it was previously marked as unsuppported, so avoiding to send a needless
notification enable command and check the returned value for failure.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240212123233.1230090-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Now that the driver core can properly handle constant struct bus_type,
move the scmi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240211-bus_cleanup-firmware2-v1-2-1851c92c7be7@marliere.net
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:
| scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
| arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
| arm-scmi firmware:scmi: unable to communicate with SCMI
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
| Hardware name: FVP Base RevC (DT)
| pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : smc_chan_free+0x3c/0x6c
| lr : smc_chan_free+0x3c/0x6c
| Call trace:
| smc_chan_free+0x3c/0x6c
| idr_for_each+0x68/0xf8
| scmi_cleanup_channels.isra.0+0x2c/0x58
| scmi_probe+0x434/0x734
| platform_probe+0x68/0xd8
| really_probe+0x110/0x27c
| __driver_probe_device+0x78/0x12c
| driver_probe_device+0x3c/0x118
| __driver_attach+0x74/0x128
| bus_for_each_dev+0x78/0xe0
| driver_attach+0x24/0x30
| bus_add_driver+0xe4/0x1e8
| driver_register+0x60/0x128
| __platform_driver_register+0x28/0x34
| scmi_driver_init+0x84/0xc0
| do_one_initcall+0x78/0x33c
| kernel_init_freeable+0x2b8/0x51c
| kernel_init+0x24/0x130
| ret_from_fork+0x10/0x20
| Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
| ---[ end trace 0000000000000000 ]---
Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.
This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1dc6558062 ("firmware: arm_scmi: Add smc/hvc transport")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240126122325.2039669-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ARM SCMI v3.2 introduces clock get permission command. To implement the
same let us stash the values of those permissions in the scmi_clock_info.
They indicate if the operation is forbidden or not.
If the CLOCK_GET_PERMISSIONS command is not supported, the default
permissions are set to allow the operations, otherwise they will be set
according to the response of CLOCK_GET_PERMISSIONS from the SCMI
platform firmware.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240121110901.1414856-1-peng.fan@oss.nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the capability for a SCMI driver to register to the core SCMI stack
with multiple SCMI protocols. In such a case the SCMI driver probe
function will end up being called once for each registered protocol
which have been also found as implemented on the platform.
This is especially useful in testing scenarios.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231221151129.325749-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Accessing clock domains descriptors by the index from the SCMI drivers
can potentially lead to out-of-bound violations if the SCMI drivers
misbehaves.
Use a common helper to check the consistency of such accesses.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240110120916.2482603-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When (sustained_freq_khz * 1000) is less than sustained_perf_level, the
multiplier will be less than 1 and hence rounded down as 0. Similarly if
it is not multiple of sustained_perf_level the dom_info->mult_factor will
contain rounded down value and will end up impacting all the frequency
calculations done using it.
Add warning if and when the domain frequency multiplier is 0 or rounded
down so that it gives a clue to get the firmware tables fixed.
Suggested-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240119152338.3047620-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Switch the plain 'tag' field in struct coreboot_driver for the newly
created coreboot_device_id struct, which also contains a tag field and
has the benefit of allowing modalias generation, and update all coreboot
drivers accordingly.
While at it, also add the id table for each driver to the module device
table to allow automatically loading the module.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240212-coreboot-mod-defconfig-v4-3-d14172676f6d@collabora.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Generate a modalias uevent for devices in the coreboot bus to allow
userspace to automatically load the corresponding modules.
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240212-coreboot-mod-defconfig-v4-1-d14172676f6d@collabora.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
On ARM PCI systems, the PCI hierarchy might be reconfigured during
boot and the firmware framebuffer might move as a result of that.
The values in screen_info will then be invalid.
Work around this problem by tracking the framebuffer's initial
location before it get relocated; then fix the screen_info state
between reloaction and creating the firmware framebuffer's device.
This functionality has been lifted from efifb. See the commit message
of commit 55d728a40d ("efi/fb: Avoid reconfiguration of BAR that
covers the framebuffer") for more information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-8-tzimmermann@suse.de
Test if the firmware framebuffer's parent PCI device, if any, has
been enabled. If not, the firmware framebuffer is most likely not
working. Hence, do not create a device for the firmware framebuffer
on disabled PCI devices.
So far, efifb tracked the status of the PCI parent device internally
and did not bind if it was disabled. This patch implements the
functionality for all PCI-based firmware framebuffers.
v3:
* make commit message more precise (Sui)
v2:
* rework sysfb_pci_dev_is_enabled() (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-6-tzimmermann@suse.de
Set the firmware framebuffer's parent device, which usually is the
graphics hardware's physical device. Integrates the framebuffer in
the Linux device hierarchy and lets Linux handle dependencies among
devices. For example, the graphics hardware won't be suspended while
the firmware device is still active.
v4:
* fix build for CONFIG_SYSFB_SIMPLEFB=n, again
v3:
* fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui)
* test result of screen_info_pci_dev() for errors (Sui)
v2:
* detect parent device in sysfb_parent_dev()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-4-tzimmermann@suse.de
The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffer I/O aperture.
Old or non-x86 systems may not set the type of video directly, but
only indicate the presence by storing 0x01 in orig_video_isVGA. The
decoding logic in screen_info_video_type() takes this into account.
It then follows similar code in vgacon's vgacon_startup() to detect
the video type from the given values.
A call to screen_info_resources() returns all known resources of the
given screen_info. The resources' values have been taken from existing
code in vgacon and vga16fb. These drivers can later be converted to
use the new interfaces.
v2:
* return ssize_t from screen_info_resources()
* don't call __screen_info_has_lfb() unnecessarily
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-2-tzimmermann@suse.de
gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures
is not enough for a 64-bit phys_addr_t:
drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open':
drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size]
295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL);
| ^
Use the correct type instead here.
Fixes: f24c4d4780 ("efi/capsule-loader: Reinstate virtual capsule mapping")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Tighten ELF relocation checks on the RISC-V EFI stub
- Give up if the new EFI memory attributes protocol fails spuriously on
x86
- Take care not to place the kernel in the lowest 16 MB of DRAM on x86
- Omit special purpose EFI memory from memblock
- Some fixes for the CXL CPER reporting code
- Make the PE/COFF layout of mixed-mode capable images comply with a
strict interpretation of the spec
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZcDtKAAKCRAwbglWLn0t
XMDfAP9ttq8Ir4+hp8A0DGE79x6eSgBIkl5ztGmMQGybzEkzdAEAgxfDUieQW4TT
GmbyGGUouvSYxfZf4gVTQn8b/bd57AI=
=Af8A
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The only notable change here is the patch that changes the way we deal
with spurious errors from the EFI memory attribute protocol. This will
be backported to v6.6, and is intended to ensure that we will not
paint ourselves into a corner when we tighten this further in order to
comply with MS requirements on signed EFI code.
Note that this protocol does not currently exist in x86 production
systems in the field, only in Microsoft's fork of OVMF, but it will be
mandatory for Windows logo certification for x86 PCs in the future.
- Tighten ELF relocation checks on the RISC-V EFI stub
- Give up if the new EFI memory attributes protocol fails spuriously
on x86
- Take care not to place the kernel in the lowest 16 MB of DRAM on
x86
- Omit special purpose EFI memory from memblock
- Some fixes for the CXL CPER reporting code
- Make the PE/COFF layout of mixed-mode capable images comply with a
strict interpretation of the spec"
* tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
cxl/trace: Remove unnecessary memcpy's
cxl/cper: Fix errant CPER prints for CXL events
efi: Don't add memblocks for soft-reserved memory
efi: runtime: Fix potential overflow of soft-reserved region size
efi/libstub: Add one kernel-doc comment
x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR
x86/efistub: Give up if memory attribute protocol returns an error
riscv/efistub: Tighten ELF relocation check
riscv/efistub: Ensure GP-relative addressing is not used
Now that the driver core can properly handle constant struct bus_type,
move the coreboot_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-firmware-v1-1-d1bff946606d@marliere.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Jonathan reports that CXL CPER events dump an extra generic error
message.
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: event severity: recoverable
{1}[Hardware Error]: Error 0, type: recoverable
{1}[Hardware Error]: section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
{1}[Hardware Error]: section length: 0x90
{1}[Hardware Error]: 00000000: 00000090 00000007 00000000 0d938086 ................
{1}[Hardware Error]: 00000010: 00100000 00000000 00040000 00000000 ................
...
CXL events were rerouted though the CXL subsystem for additional
processing. However, when that work was done it was missed that
cper_estatus_print_section() continued with a generic error message
which is confusing.
Teach CPER print code to ignore printing details of some section types.
Assign the CXL event GUIDs to this set to prevent confusing unknown
prints.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Adding memblocks for soft-reserved regions prevents them from later being
hotplugged in by dax_kmem.
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
md_size will have been narrowed if we have >= 4GB worth of pages in a
soft-reserved region.
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the description of @memory_type to silence the warning:
drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ardb: tweak comment]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI stub's kernel placement logic randomizes the physical placement
of the kernel by taking all available memory into account, and picking a
region at random, based on a random seed.
When KASLR is disabled, this seed is set to 0x0, and this results in the
lowest available region of memory to be selected for loading the kernel,
even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is
typically reserved for the GFP_DMA region, to accommodate masters that
can only access the first 16 MiB of system memory.
Even if such devices are rare these days, we may still end up with a
warning in the kernel log, as reported by Tom:
swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
Fix this by tweaking the random allocation logic to accept a low bound
on the placement, and set it to LOAD_PHYSICAL_ADDR.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Reported-by: Tom Englund <tomenglund26@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
response_msg is a pointer to an unsigned int (u32). So passing just
response_msg to sizeof would not print the size of the variable. To get
the size of response_msg we need to pass it as a pointer variable.
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
fb:
- fix simpledrm/i915 regression by reverting change
scheduler:
- fix regression affecting amdgpu users due to sched draining
nouveau:
- revert 6.7 deadlock fix as it has side effects
dp:
- fix documentation warning
ttm:
- fix dummy page read on some platforms
bridge:
- anx7625 suspend fix
- sii902x: fix probing and audio registration
- parade-ps8640: fix suspend of bridge, aux fixes
- samsung-dsim: avoid using FORCE_STOP_STATE
panel:
- simple add missing bus flags
- fix samsung-s6d7aa0 flags
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
i915:
- DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
- Drop -Wstringop-overflow (broken on GCC11)
ivpu:
- fix recovery/reset support
- improve submit ioctl stability
- fix dev open/close races on unbind
- PLL disable reset fix
- deprecate context priority param
- improve debug buffer logging
- disable buffer sharing across VPU contexts
- free buffer sgt on unbind
- fix missing lock around shmem vmap
- add better boot diagnostics
- add more debug prints around mapping
- dump MMU events in case of timeout
v3d:
- NULL ptr dereference fix
exynos:
- fix stack usage
- fix incorrect type
- fix dt typo
- fix gsc runtime resume
xe:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
-----BEGIN PGP SIGNATURE-----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=eZEy
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Lots going on for rc2, ivpu has a bunch of stabilisation and debugging
work, then amdgpu and xe are the main fixes. i915, exynos have a few,
then some misc panel and bridge fixes.
Worth mentioning are three regressions. One of the nouveau fixes in
6.7 for a serious deadlock had side effects, so I guess we will bring
back the deadlock until I can figure out what should be done properly.
There was a scheduler regression vs amdgpu which was reported in a few
places and is now fixed. There was an i915 vs simpledrm problem
resulting in black screens, that is reverted also.
I'll be working on a proper nouveau fix, it kinda looks like one of
those cases where someone tried to use an atomic where they should
have probably used a lock, but I'll see.
fb:
- fix simpledrm/i915 regression by reverting change
scheduler:
- fix regression affecting amdgpu users due to sched draining
nouveau:
- revert 6.7 deadlock fix as it has side effects
dp:
- fix documentation warning
ttm:
- fix dummy page read on some platforms
bridge:
- anx7625 suspend fix
- sii902x: fix probing and audio registration
- parade-ps8640: fix suspend of bridge, aux fixes
- samsung-dsim: avoid using FORCE_STOP_STATE
panel:
- simple add missing bus flags
- fix samsung-s6d7aa0 flags
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
i915:
- DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
- Drop -Wstringop-overflow (broken on GCC11)
ivpu:
- fix recovery/reset support
- improve submit ioctl stability
- fix dev open/close races on unbind
- PLL disable reset fix
- deprecate context priority param
- improve debug buffer logging
- disable buffer sharing across VPU contexts
- free buffer sgt on unbind
- fix missing lock around shmem vmap
- add better boot diagnostics
- add more debug prints around mapping
- dump MMU events in case of timeout
v3d:
- NULL ptr dereference fix
exynos:
- fix stack usage
- fix incorrect type
- fix dt typo
- fix gsc runtime resume
xe:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests"
* tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits)
Revert "nouveau: push event block/allowing out of the fence context"
drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
drm/sched: Drain all entities in DRM sched run job worker
drm/amd/display: "Enable IPS by default"
drm/amd: Add a DC debug mask for IPS
drm/amd/display: Disable ips before dc interrupt setting
drm/amd/display: Replay + IPS + ABM in Full Screen VPB
drm/amd/display: Add IPS checks before dcn register access
drm/amd/display: Add Replay IPS register for DMUB command table
drm/amd/display: Allow IPS2 during Replay
drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
drm/amd/amdgpu: Assign GART pages to AMD device mapping
drm/amd/pm: Fetch current power limit from FW
drm/amdgpu: Fix null pointer dereference
drm/amdgpu: Show vram vendor only if available
drm/amd/pm: update the power cap setting
drm/amdgpu: Avoid fetching vram vendor information
drm/amdgpu/pm: Fix the power source flag error
drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions
...
The recently introduced EFI memory attributes protocol should be used
if it exists to ensure that the memory allocation created for the kernel
permits execution. This is needed for compatibility with tightened
requirements related to Windows logo certification for x86 PCs.
Currently, we simply strip the execute protect (XP) attribute from the
entire range, but this might be rejected under some firmware security
policies, and so in a subsequent patch, this will be changed to only
strip XP from the executable region that runs early, and make it
read-only (RO) as well.
In order to catch any issues early, ensure that the memory attribute
protocol works as intended, and give up if it produces spurious errors.
Note that the DXE services based fallback was always based on best
effort, so don't propagate any errors returned by that API.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Quite a few fixes addressing issues around missing RW lock initialisation
in ffa_setup_partitions(), missing check for xa_load() return value,
use of xa_insert instead of xa_store to flag case of duplicate insertion.
It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase()
instead of xa_extract() and kfree(). Finally it includes fixes around
handling of partitions setup failures during initialisation.
-----BEGIN PGP SIGNATURE-----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=K7Rw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IR2+
-----END PGP SIGNATURE-----
Merge tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.8
Quite a few fixes addressing issues around missing RW lock initialisation
in ffa_setup_partitions(), missing check for xa_load() return value,
use of xa_insert instead of xa_store to flag case of duplicate insertion.
It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase()
instead of xa_extract() and kfree(). Finally it includes fixes around
handling of partitions setup failures during initialisation.
* tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Handle partitions setup failures
firmware: arm_ffa: Use xa_insert() and check for result
firmware: arm_ffa: Simplify ffa_partitions_cleanup()
firmware: arm_ffa: Check xa_load() return value
firmware: arm_ffa: Add missing rwlock_init() for the driver partition
firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
Link: https://lore.kernel.org/r/20240122161652.3551159-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The EFI stub makefile contains logic to ensure that the objects that
make up the stub do not contain relocations that require runtime fixups
(typically to account for the runtime load address of the executable)
On RISC-V, we also avoid GP based relocations, as they require that GP
is assigned the correct base in the startup code, which is not
implemented in the EFI stub.
So add these relocation types to the grep expression that is used to
carry out this check.
Link: https://lkml.kernel.org/r/42c63cb9-87d0-49db-9af8-95771b186684%40siemens.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The cflags for the RISC-V efistub were missing -mno-relax, thus were
under the risk that the compiler could use GP-relative addressing. That
happened for _edata with binutils-2.41 and kernel 6.1, causing the
relocation to fail due to an invalid kernel_size in handle_kernel_image.
It was not yet observed with newer versions, but that may just be luck.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Make ffa_setup_partitions() fail, cleanup and return an error when the Host
partition setup fails: in such a case ffa_init() itself will fail.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-6-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While adding new partitions descriptors to the XArray the outcome of the
stores should be checked and, in particular, it has also to be ensured
that an existing entry with the same index was not already present, since
partitions IDs are expected to be unique.
Use xa_insert() instead of xa_store() since it returns -EBUSY when the
index is already in use and log an error when that happens.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-5-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
On cleanup iterate the XArrays with xa_for_each() and remove the existent
entries with xa_erase(), finally destroy the XArray itself.
Remove partition_count field from drv_info since no more used anywhwere.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-4-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a check to verify the result of xa_load() during the partition
lookups done while registering/unregistering the scheduler receiver
interrupt callbacks and while executing the main scheduler receiver
interrupt callback handler.
Fixes: 0184450b8b ("firmware: arm_ffa: Add schedule receiver callback mechanism")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-3-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the missing rwlock initialization for the FF-A partition associated
the driver in ffa_setup_partitions(). It will the primary scheduler
partition in the host or the VM partition in the virtualised environment.
IOW, it corresponds to the partition with VM ID == drv_info->vm_id.
Fixes: 1b6bf41b7a ("firmware: arm_ffa: Add notification handling mechanism")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-2-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Rollback currently supported SCMI clock protocol version to v2.0 since
some of the mandatory v3.0 features are indeed still not supported yet.
Fixes: b5efc28a75 ("firmware: arm_scmi: Add protocol versioning checks")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240109181716.2338636-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The clock protocol version as per the SCMI v3.2 specification is 0x30000.
Enable the v3.0 clock protocol features only when clock protocol version
equals 0x30000.
The previous beta version of the spec had this value set to 0x20001 and
th same value trickled down from the initial development. The version
update were missed in the driver.
Fixes: e49e314a2c ("firmware: arm_scmi: Add clock v3.2 CONFIG_SET support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240109150106.2066739-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When storing opps by level or index use xa_insert() instead of xa_store()
and add error-checking to spot bad duplicates indexes possibly wrongly
provided by the platform firmware.
Fixes: 31c7c1397a ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108185050.1628687-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
linux/bug.h includes asm-generic/bug.h already and hence replacing
asm-generic/bug.h with linux/bug.h will not regress any build.
Also, it is always better to avoid header file inclusion from asm-generic
if possible.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Link: https://lore.kernel.org/r/20231226-shmem-v1-1-ea15ce81d8ba@google.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
On reception of a completion interrupt the shared memory area is accessed
to retrieve the message header at first and then, if the message sequence
number identifies a transaction which is still pending, the related
payload is fetched too.
When an SCMI command times out the channel ownership remains with the
platform until eventually a late reply is received and, as a consequence,
any further transmission attempt remains pending, waiting for the channel
to be relinquished by the platform.
Once that late reply is received the channel ownership is given back
to the agent and any pending request is then allowed to proceed and
overwrite the SMT area of the just delivered late reply; then the wait
for the reply to the new request starts.
It has been observed that the spurious IRQ related to the late reply can
be wrongly associated with the freshly enqueued request: when that happens
the SCMI stack in-flight lookup procedure is fooled by the fact that the
message header now present in the SMT area is related to the new pending
transaction, even though the real reply has still to arrive.
This race-condition on the A2P channel can be detected by looking at the
channel status bits: a genuine reply from the platform will have set the
channel free bit before triggering the completion IRQ.
Add a consistency check to validate such condition in the A2P ISR.
Reported-by: Xinglong Yang <xinglong.yang@cixtech.com>
Closes: https://lore.kernel.org/all/PUZPR06MB54981E6FA00D82BFDBB864FBF08DA@PUZPR06MB5498.apcprd06.prod.outlook.com/
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Xinglong Yang <xinglong.yang@cixtech.com>
Link: https://lore.kernel.org/r/20231220172112.763539-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This reverts commit df67699c9c.
Jens Axboe reported a regression that his machine is failing to show a
console, or in fact anything, on current -git. There's no output and no
console after:
Loading Linux 6.7.0+ ...
Loading initial ramdisk ...
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Here is the big set of char/misc and other driver subsystem changes for
6.8-rc1. Lots of stuff in here, but first off, you will get a merge
conflict in drivers/android/binder_alloc.c when merging this tree due to
changing coming in through the -mm tree.
The resolution of the merge issue can be found here:
https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au
or in a simpler patch form in that thread:
https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com
If there are issues with the merge of this file, please let me know.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported issues
(other than the binder merge conflict.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP
YoI7f1I4GBcC0GKNfK6s
=+Kyv
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaEregAKCRD3ErUQojoP
X0c9AP0ZdpE1zWFdjYg7ucKhNGrMfXWS8auvkC0qdd9Q0psnmQD/Z22JIl/fpgrk
0T74KAEd7MwMXGIUm5VKMe/AZJtaBgs=
=/sky
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
- Move the generic PM domain and its governor to the pmdomain subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd
-----BEGIN PGP SIGNATURE-----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=xSMR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
After consuming the global screen_info_state in sysfb_init(), the
created platform device maintains the firmware framebuffer. Clear
screen_info to avoid conflicting access. Subsequent kexec reboots
now ignore the firmware framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
A new drivers/cache/ subsystem is added to contain drivers for abstracting
cache flush methods on riscv and potentially others, as this is needed for
handling non-coherent DMA but several SoCs require nonstandard hardware
methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195,
and driver support for MT8188 along with some code refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon
-----BEGIN PGP SIGNATURE-----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=4bKY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
- Fix a syzbot reported issue in efivarfs where concurrent accesses to
the file system resulted in list corruption
- Add support for accessing EFI variables via the TEE subsystem (and a
trusted application in the secure world) instead of via EFI runtime
firmware running in the OS's execution context
- Avoid linker tricks to discover the image base on LoongArch
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZYVaHQAKCRAwbglWLn0t
XPm/AQDzX9A6TND00eOLYYWw91kybHnzrVd8GRKOv2EIxGz33AEAgW6nXIJlBRax
MBq6S/sXdyknuCC3sO7H9FexdD4BzQM=
=MZUx
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Fix a syzbot reported issue in efivarfs where concurrent accesses to
the file system resulted in list corruption
- Add support for accessing EFI variables via the TEE subsystem (and a
trusted application in the secure world) instead of via EFI runtime
firmware running in the OS's execution context
- Avoid linker tricks to discover the image base on LoongArch
* tag 'efi-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: memmap: fix kernel-doc warnings
efi/loongarch: Directly position the loaded image file
efivarfs: automatically update super block flag
efi: Add tee-based EFI variable driver
efi: Add EFI_ACCESS_DENIED status code
efi: expose efivar generic ops register function
efivarfs: Move efivarfs list into superblock s_fs_info
efivarfs: Free s_fs_info on unmount
efivarfs: Move efivar availability check into FS context init
efivarfs: force RO when remounting if SetVariable is not supported
* Fixes
- Fix an invalid address access.
* Misc
- Use .remove_new() for converting the callback to return void.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZZu2NhMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0568A/2e7mfbrbOecSIJp+VFNnjg5sUJHKeKR
qLMrQ2bW3N4bAQC6kb8hBi5bBjDu8qE/ivXn9MbKoXAdZ+gbWdGsSWD6DA==
=ZOhl
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-firmware-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Fix an invalid address access.
- Use .remove_new() for converting the callback to return void
* tag 'tag-chrome-platform-firmware-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Convert to platform remove callback returning void
firmware: coreboot: framebuffer: Avoid invalid zero physical address
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki).
- Adjust the cpufreq thermal reduction algorithm in the ACPI processor
driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann).
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki).
- Switch over ACPI to using a threaded interrupt handler for the
SCI (Rafael J. Wysocki).
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki).
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki).
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock to
keep local interrupts on (Rafael J. Wysocki).
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg).
- Correct and clean up the generic function for parsing ACPI data-only
tables with array structure (Yuntao Wang).
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann).
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen).
- Modify the ACPI LPIT table handling code to avoid u32 multiplication
overflows in state residency computations (Nikita Kiryushin).
- Drop an unused helper function from the ACPI backlight (video) driver
and add a clarifying comment to it (Hans de Goede).
- Update the ACPI backlight driver to avoid using uninitialized memory
in some cases (Nikita Kiryushin).
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu).
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik).
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous memory
failure events, so they are handled differently from the asynchronous
ones (Shuai Xue).
- Fix NULL pointer dereference check in the ACPI extlog driver (Prarit
Bhargava).
- Adjust the ACPI extlog driver to clear the Extended Error Log status
when RAS_CEC handled the error (Tony Luck).
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede).
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is not
the same as one of the real pxm values (Yuntao Wang).
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko).
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap).
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue).
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov).
-----BEGIN PGP SIGNATURE-----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=Ntzm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
- Replace magic numbers in GDT descriptor definitions & handling:
- Introduce symbolic names via macros for descriptor types/fields/flags,
and then use these symbolic names.
- Clean up definitions a bit, such as GDT_ENTRY_INIT()
- Fix/clean up details that became visibly inconsistent after the
symbol-based code was introduced:
- Unify accessed flag handling
- Set the D/B size flag consistently & according to the HW specification
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Y0pg
-----END PGP SIGNATURE-----
Merge tag 'x86-asm-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"Replace magic numbers in GDT descriptor definitions & handling:
- Introduce symbolic names via macros for descriptor
types/fields/flags, and then use these symbolic names.
- Clean up definitions a bit, such as GDT_ENTRY_INIT()
- Fix/clean up details that became visibly inconsistent after the
symbol-based code was introduced:
- Unify accessed flag handling
- Set the D/B size flag consistently & according to the HW
specification"
* tag 'x86-asm-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add DB flag to 32-bit percpu GDT entry
x86/asm: Always set A (accessed) flag in GDT descriptors
x86/asm: Replace magic numbers in GDT descriptors, script-generated change
x86/asm: Replace magic numbers in GDT descriptors, preparations
x86/asm: Provide new infrastructure for GDT descriptors
* for-next/cpufeature
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye olde
Thunder-X machines.
- Avoid mapping KPTI trampoline when it is not required.
- Make CPU capability API more robust during early initialisation.
* for-next/early-idreg-overrides
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped.
* for-next/fpsimd
- Restore kernel-mode fpsimd context lazily, allowing us to run fpsimd
code sequences in the kernel with pre-emption enabled.
* for-next/kbuild
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y.
- Makefile cleanups.
* for-next/lpa2-prep
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
* for-next/misc
- Remove dead code and fix a typo.
* for-next/mm
- Pass NUMA node information for IRQ stack allocations.
* for-next/perf
- Add perf support for the Synopsys DesignWare PCIe PMU.
- Add support for event counting thresholds (FEAT_PMUv3_TH) introduced
in Armv8.8.
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations.
* for-next/rip-vpipt
- Remove what support we had for the obsolete VPIPT I-cache policy.
* for-next/selftests
- Improvements to the SVE and SME selftests.
* for-next/stacktrace
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing.
* for-next/sysregs
- Update a bunch of register definitions based on the latest XML drop
from Arm.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmWWvKYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNIiTB/9agZBkEhZjP2sNDGyE4UFwawweWHkt2r8h
WyvdwP91Z/AIsYSsGYu36J0l4pOnMKp/i6t+rt031SK4j+Q8hJYhSfDt3RvVbc0/
Pz9D18V6cLrfq+Yxycqq9ufVdjs+m+CQ5WeLaRGmNIyEzJ/Jv/qrAN+2r603EeLP
nq08qMZhDIQd2ZzbigCnGaNrTsVSafFfBFv1GsgDvnMZAjs1G6457A6zu+NatNUc
+TMSG+3EawutHZZ2noXl0Ra7VOfIbVZFiUssxRPenKQByHHHR+QB2c/O1blri+dm
XLMutvqO2/WvYGIfXO5koqZqvpVeR3zXxPwmGi5hQBsmOjtXzKd+
=U4mo
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"CPU features:
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye
olde Thunder-X machines
- Avoid mapping KPTI trampoline when it is not required
- Make CPU capability API more robust during early initialisation
Early idreg overrides:
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped
FPsimd:
- Restore kernel-mode fpsimd context lazily, allowing us to run
fpsimd code sequences in the kernel with pre-emption enabled
KBuild:
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y
- Makefile cleanups
LPA2 prep:
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
Misc:
- Remove dead code and fix a typo
MM:
- Pass NUMA node information for IRQ stack allocations
Perf:
- Add perf support for the Synopsys DesignWare PCIe PMU
- Add support for event counting thresholds (FEAT_PMUv3_TH)
introduced in Armv8.8
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations
RIP VPIPT:
- Remove what support we had for the obsolete VPIPT I-cache policy
Selftests:
- Improvements to the SVE and SME selftests
Stacktrace:
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing
Sysregs:
- Update a bunch of register definitions based on the latest XML drop
from Arm"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
kselftest/arm64: Don't probe the current VL for unsupported vector types
efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
arm64: properly install vmlinuz.efi
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64: memory: remove duplicated include
arm: perf: Fix ARCH=arm build with GCC
arm64: Align boot cpucap handling with system cpucap handling
arm64: Cleanup system cpucap handling
MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
drivers/perf: add DesignWare PCIe PMU driver
PCI: Move pci_clear_and_set_dword() helper to PCI header
PCI: Add Alibaba Vendor ID to linux/pci_ids.h
docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
arm64: irq: set the correct node for shadow call stack
Revert "perf/arm_dmc620: Remove duplicate format attribute #defines"
arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD
arm64: fpsimd: Preserve/restore kernel mode NEON at context switch
...
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b5a82472a6d61608c2cd7728ca364f6c88a821c3.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/9074d1ad2e889425991fecad664781ae27b2418a.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/e574041cdce2e4e69f729dfa726a6d090762cff9.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/06df45c697a747cb6543800a4613db6e1f5462b4.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/5df31ef3c069f45634631c9c639bbb60ab1d4798.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/8d7d86a24ea36985845c17b6da0933fedbf99ad8.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e2ea8abb4c30190392a86cf05cecd722d0f0b493.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f4cc1ffe30b837d5eab96f2924f51999dfa9f671.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/d323e4f24bfab3ac1480933deb51e7c5cb025b09.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e7b4bc389949c3613a358bd8e57d70d7acd5552b.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/86165c8ccd0bb47000a29e711102795b36c8df41.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge ACPI utility functions updates for 6.8-rc1:
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
* acpi-utils:
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
ACPI: bus: update acpi_dev_uid_match() to support multiple types
- Ensure that the KASLR load flag is set in boot_params when loading the
kernel randomized directly from the EFI stub
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZZQ5pwAKCRAwbglWLn0t
XPP7AQDTyLbFq7UMt5w+rZj8bXBr80VLmM/hGo9XhQYfKTZgeAEA59UEj4Y7TCqE
iPyvLihY+DuUT+EWgim0W3JwKeUM8gQ=
=LqrP
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Ensure that the KASLR load flag is set in boot_params when loading
the kernel randomized directly from the EFI stub
* tag 'efi-urgent-for-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Fix the missing KASLR_FLAG bit in boot_params->hdr.loadflags
When KASLR is enabled, the KASLR_FLAG bit in boot_params->hdr.loadflags
should be set to 1 to propagate KASLR status from compressed kernel to
kernel, just as the choose_random_location() function does.
Currently, when the kernel is booted via the EFI stub, the KASLR_FLAG
bit in boot_params->hdr.loadflags is not set, even though it should be.
This causes some functions, such as kernel_randomize_memory(), not to
execute as expected. Fix it.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ardb: drop 'else' branch clearing KASLR_FLAG]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/d323e4f24bfab3ac1480933deb51e7c5cb025b09.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Few minor updates:
1. Addition of protocol versioning checks to warn if the firmware version
is newer or greater than the version supported by the kernel driver
2. Increment of the maximum OPP count in the perf protocol from 16 to 32
as needed by a few recent/future qualcomm platforms
3. Optimisation of set performance operations by returning error
immediately and avoiding to send the command to the platform(which
would return error eventually) if the domain doesn't support perf
operations. Similarly, the fastchannel handling is also optimised by
avoiding to initialise the corresponding set operations fastchannels.
4. Extension of extended names helper to accomodate recently added new
flags parameter to be able to properly configure the command used to
query the extended name of a resource.
-----BEGIN PGP SIGNATURE-----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=VpGl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=h4CZ
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.8
Few minor updates:
1. Addition of protocol versioning checks to warn if the firmware version
is newer or greater than the version supported by the kernel driver
2. Increment of the maximum OPP count in the perf protocol from 16 to 32
as needed by a few recent/future qualcomm platforms
3. Optimisation of set performance operations by returning error
immediately and avoiding to send the command to the platform(which
would return error eventually) if the domain doesn't support perf
operations. Similarly, the fastchannel handling is also optimised by
avoiding to initialise the corresponding set operations fastchannels.
4. Extension of extended names helper to accomodate recently added new
flags parameter to be able to properly configure the command used to
query the extended name of a resource.
* tag 'scmi-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add protocol versioning checks
firmware: arm_scmi: Increase the maximum opp count in the perf protocol
firmware: arm_scmi: Fix NULL pointer dereference during fastchannel init
firmware: arm_scmi: Add optional flags to extended names helper
firmware: arm_scmi: Populate fastchannel info only if set operations are allowed
firmware: arm_scmi: Check beforehand if the perf domain set operations are allowed
Link: https://lore.kernel.org/r/20231213115953.3578115-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There's only one set of changes here, the addition of "Auto Update"
support for PolarFire SoC. Auto Update is one of the ways that the FPGA
bitstream can be updated, and the only one suitable for use from Linux
as it does not immediately initiate a reboot when started.
The driver was not accepted in the FPGA manager subsystem as the update
only occurs after a reboot and makes no use of the FPGA manager
framework.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZYQwXQAKCRB4tDGHoIJi
0lieAQC6en0Y0TRDRF18NX0SqnmrxMaiwJxV0tGp+WGgykpmEwEA9vZliqRRG+zJ
ZTMkk+zHVTtYgIXt2WFelDLKj5abHAE=
=4VMq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yAyj
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC drivers for v6.8
There's only one set of changes here, the addition of "Auto Update"
support for PolarFire SoC. Auto Update is one of the ways that the FPGA
bitstream can be updated, and the only one suitable for use from Linux
as it does not immediately initiate a reboot when started.
The driver was not accepted in the FPGA manager subsystem as the update
only occurs after a reboot and makes no use of the FPGA manager
framework.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: add auto-update driver to mpfs entry
firmware: microchip: Replace of_device.h with explicit include
firmware: microchip: add PolarFire SoC Auto Update support
soc: microchip: mpfs: add auto-update subdev to system controller
soc: microchip: mpfs: print service status in warning message
soc: microchip: mpfs: enable access to the system controller's flash
dt-bindings: soc: microchip: add a property for system controller flash
firmware_loader: Expand Firmware upload error codes with firmware invalid error
Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for SM8650 and X1E is added to the LLCC driver, the
LLCC_TRP_ATTR2_CFGn register stride is corrected, and a bug where for
each iteration looping over slices previous settings for dis_cap_alloc
and retain_on_pc are overwritten.
A quirk is introduced in UCSI, for implementations that does not handle
UCSI_GET_PDOS for non-PD partners. With this, USCI support is enabled by
default in pmic_glink. It is later reverted for SC8280XP due reported
errors.
A few memory leaks in error paths of qseecom are taken care of.
A small driver to expose the ADSP PDCharger ULOG debug log is
introduced, to aid debugging issues with pmic_glink.
The identiy of SM8650, PM8937 and a few DSPs are added to the Qualcomm
socinfo driver.
The Qualcomm sleep stats driver is extended to allow getting detailed
statistics about usage of various DDR states. Unfortunately this ABI
does not seem to be stable across platforms, so this addition is dropped
again while the reported problems are investigated further.
Andy is moved from MAINTAINERS to CREDITS. Thank you, Andy.
-----BEGIN PGP SIGNATURE-----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=ijVE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Dr5+
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.8
Support for SM8650 and X1E is added to the LLCC driver, the
LLCC_TRP_ATTR2_CFGn register stride is corrected, and a bug where for
each iteration looping over slices previous settings for dis_cap_alloc
and retain_on_pc are overwritten.
A quirk is introduced in UCSI, for implementations that does not handle
UCSI_GET_PDOS for non-PD partners. With this, USCI support is enabled by
default in pmic_glink. It is later reverted for SC8280XP due reported
errors.
A few memory leaks in error paths of qseecom are taken care of.
A small driver to expose the ADSP PDCharger ULOG debug log is
introduced, to aid debugging issues with pmic_glink.
The identiy of SM8650, PM8937 and a few DSPs are added to the Qualcomm
socinfo driver.
The Qualcomm sleep stats driver is extended to allow getting detailed
statistics about usage of various DDR states. Unfortunately this ABI
does not seem to be stable across platforms, so this addition is dropped
again while the reported problems are investigated further.
Andy is moved from MAINTAINERS to CREDITS. Thank you, Andy.
* tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (34 commits)
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
MAINTAINERS: qcom: move Andy Gross to credits
soc: qcom: pmic_glink: drop stray semicolons
soc: qcom: pmic_glink: disable UCSI on sc8280xp
soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration
soc: qcom: pmic_pdcharger_ulog: Fix hypothetical ulog request message endianess
soc: qcom: pmic_pdcharger_ulog: Move TRACE_SYSTEM out of #if protection
soc: qcom: pmic_pdcharger_ulog: Search current directory for headers
soc: qcom: socinfo: Add few DSPs to get their image details
soc: qcom: llcc: Add missing description for members in slice config
Revert "soc: qcom: stats: Add DDR sleep stats"
dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs
soc: qcom: socinfo: Add PM8937 Power IC
soc: qcom: llcc: Add configuration data for X1E80100
dt-bindings: cache: qcom,llcc: Add X1E80100 compatible
soc: qcom: pmic_glink_altmode: fix port sanity check
...
Link: https://lore.kernel.org/r/20231219041855.732578-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- ti_sci: Minor fixup for off by one error in debugfs_create
- k3-socinfo: Refactoring and add j721e detection, j722s
-----BEGIN PGP SIGNATURE-----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=HGxa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wpWw
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.8
- ti_sci: Minor fixup for off by one error in debugfs_create
- k3-socinfo: Refactoring and add j721e detection, j722s
* tag 'ti-driver-soc-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo: Add JTAG ID for J722S
soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs
firmware: ti_sci: Fix an off-by-one in ti_sci_debugfs_create()
Link: https://lore.kernel.org/r/20231218153043.r5psxbjjpccusjg4@september
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for a reserved system thread in the SMC-ABI of the OP-TEE driver.
SCMI with OP-TEE transport uses this to guarantee that it will always have
a thread available in the secure world.
-----BEGIN PGP SIGNATURE-----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=0+RD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IrSQ
-----END PGP SIGNATURE-----
Merge tag 'system-thread-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
OP-TEE add reserved system thread
Add support for a reserved system thread in the SMC-ABI of the OP-TEE driver.
SCMI with OP-TEE transport uses this to guarantee that it will always have
a thread available in the secure world.
* tag 'system-thread-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
firmware: arm_scmi: optee: use optee system invocation
tee: optee: support tracking system threads
tee: system session
tee: optee: system thread call property
Link: https://lore.kernel.org/r/20231211102600.GA571787@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Correct all kernel-doc notation to repair warnings that are
reported by scripts/kernel-doc:
memmap.c:38: warning: No description found for return value of '__efi_memmap_init'
memmap.c:82: warning: No description found for return value of 'efi_memmap_init_early'
memmap.c:132: warning: Function parameter or member 'addr' not described in 'efi_memmap_init_late'
memmap.c:132: warning: Excess function parameter 'phys_addr' description in 'efi_memmap_init_late'
memmap.c:132: warning: No description found for return value of 'efi_memmap_init_late'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We have no known use for having the CPU track whether GDT descriptors
have been accessed or not.
Simplify the code by adding the flag to the common flags and removing
it everywhere else.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-5-vegard.nossum@oracle.com
Actually replace the numeric values by the new symbolic values.
I used this to find all the existing users of the GDT_ENTRY*() macros:
$ git grep -P 'GDT_ENTRY(_INIT)?\('
Some of the lines will exceed 80 characters, but some of them will be
shorter again in the next couple of patches.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-4-vegard.nossum@oracle.com
The use of the 'kernel_offset' variable to position the image file that
has been loaded by UEFI or GRUB is unnecessary, because we can directly
position the loaded image file through using the image_base field of the
efi_loaded_image struct provided by UEFI.
Replace kernel_offset with image_base to position the image file that has
been loaded by UEFI or GRUB.
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
You do not need to use $(shell ...) in recipe lines, as they are already
executed in a shell. An alternative solution is $$(...), which is an
escaped sequence of the shell's command substituion, $(...).
For this case, there is a reason to avoid $(shell ...).
Kbuild detects command changes by using the if_changed macro, which
compares the previous command recorded in .*.cmd with the current
command from Makefile. If they differ, Kbuild re-runs the build rule.
To diff the commands, Make must expand $(shell ...) first. It means that
hexdump is executed every time, even when nothing needs rebuilding. If
Kbuild determines that vmlinux.bin needs rebuilding, hexdump will be
executed again to evaluate the 'cmd' macro, one more time to really
build vmlinux.bin, and finally yet again to record the expanded command
into .*.cmd.
Replace $(shell ...) with $$(...) to avoid multiple, unnecessay shell
evaluations. Since Make is agnostic about the shell code, $(...), the
if_changed macro compares the string "$(hexdump -s16 -n4 ...)" verbatim,
so hexdump is run only for building vmlinux.bin.
For the same reason, $(shell ...) in EFI_ZBOOT_OBJCOPY_FLAGS should be
eliminated.
While I was here, I replaced '&&' with ';' because a command for
if_changed is executed with 'set -e'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231218080127.907460-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Fix instances of returning error codes directly instead of jumping to
the relevant labels where memory allocated for the SCM calls would be
freed.
Fixes: 759e7a2b62 ("firmware: Add support for Qualcomm UEFI Secure Application")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311270828.k4HGcjiL-lkp@intel.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Link: https://lore.kernel.org/r/20231127141600.20929-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As per the current code base, PM_CLOCK_SETRATE and PM_CLOCK_GETRATE
APIs are not supported for the runtime operations. In the case of
ZynqMP returning an error from TF-A when there is any request to
access these APIs and for Versal also it is returning an error like
NO_ACCESS from the firmware. So, just removing the unused code to
avoid the confusion around these APIs.
Also, there is no issue with the backward compatibility as these APIs
were never used since implemented. Hence no need to bump up the
version of the feature check API as well.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6ccbffbafd1f0f48f6574d5a3bf2db6a5603fdb0.1702565618.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Deal with a regression in the recently refactored x86 EFI stub code on
older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZXgvLAAKCRAwbglWLn0t
XLgKAP9oKLP7v0TD2BJOPGqr4kEtMfZYayV2EUN387VbPYfT0wEAoeDeZmaGUYce
BuovToERSgjj2FylAWNlZATEh2d35ww=
=kv9E
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Deal with a regression in the recently refactored x86 EFI stub code
on older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Avoid physical KASLR on older Dell systems
efi/loongarch: Use load address to calculate kernel entry address
River reports boot hangs with v6.6 and v6.7, and the bisect points to
commit
a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
which moves the memory allocation and kernel decompression from the
legacy decompressor (which executes *after* ExitBootServices()) to the
EFI stub, using boot services for allocating the memory. The memory
allocation succeeds but the subsequent call to decompress_kernel() never
returns, resulting in a failed boot and a hanging system.
As it turns out, this issue only occurs when physical address
randomization (KASLR) is enabled, and given that this is a feature we
can live without (virtual KASLR is much more important), let's disable
the physical part of KASLR when booting on AMI UEFI firmware claiming to
implement revision v2.0 of the specification (which was released in
2006), as this is the version these systems advertise.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efivar operation is updated when the tee_stmm_efi module is probed.
tee_stmm_efi module supports SetVariable runtime service, but user needs
to manually remount the efivarfs as RW to enable the write access if the
previous efivar operation does not support SetVariable and efivarfs is
mounted as read-only.
This commit notifies the update of efivar operation to efivarfs
subsystem, then drops SB_RDONLY flag if the efivar operation supports
SetVariable.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
[ardb: use per-superblock instance of the notifier block]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the flash is not owned by the non-secure world, accessing the EFI
variables is straight-forward and done via EFI Runtime Variable
Services. In this case, critical variables for system integrity and
security are normally stored in the dedicated secure storage and can
only be manipulated directly from the secure world.
Usually, small embedded devices don't have the special dedicated secure
storage. The eMMC device with an RPMB partition is becoming more common,
and we can use this RPMB partition to store the EFI Variables.
The eMMC device is typically owned by the non-secure world (Linux in our
case). There is an existing solution utilizing eMMC RPMB partition for
EFI Variables, it is implemented by interacting with TEE (OP-TEE in this
case), StandaloneMM (as EFI Variable Service Pseudo TA), eMMC driver and
tee-supplicant. The last piece is the tee-based variable access driver
to interact with TEE and StandaloneMM.
So let's add the kernel functions needed.
This feature is implemented as a kernel module. StMM PTA has
TA_FLAG_DEVICE_ENUM_SUPP flag when registered to OP-TEE so that this
tee_stmm_efi module is probed after tee-supplicant starts, since
"SetVariable" EFI Runtime Variable Service requires to interact with
tee-supplicant.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This is a preparation for supporting efivar operations provided by other
than efi subsystem. Both register and unregister functions are exposed
so that non-efi subsystem can revert the efi generic operation.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The efi_relocate_kernel() may load the PIE kernel to anywhere, the
loaded address may not be equal to link address or
EFI_KIMG_PREFERRED_ADDRESS.
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean build.
The ones that address serious runtime issues are all on the i.MX platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new
sysfs attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support.
-----BEGIN PGP SIGNATURE-----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=mw0X
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean
build.
The ones that address serious runtime issues are all on the i.MX
platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new sysfs
attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support"
* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
MAINTAINERS: change the S32G2 maintainer's email address.
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
...
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.
of_device.h isn't needed, but platform_device.h is.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Failure to register SGI for firmware event notification is non-fatal error
when feature is not supported by other modules such as Xen and TF-A. Add
_info level log message for such special case.
Also add XST_PM_INVALID_VERSION error code and map it to -EOPNOSUPP Linux
kernel error code. If feature is not supported or EEMI API version is
mismatch, firmware can return XST_PM_INVALID_VERSION = 4 or
XST_PM_NO_FEATURE = 19 error code.
Co-developed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-5-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use family code in order to register event manager
driver for Versal and Versal NET platforms, instead
of using compatible string.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-4-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support feature check for all modules, append the module id of the API
that is being checked to the feature check API so it could be routed to
the target module for processing.
There is no need to check compatible string because the board information
is taken via firmware interface.
Co-developed-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-3-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
System-level platform management layer (do_fw_call()) has support for
maximum of 5 arguments as of now (1 EEMI API ID + 4 command arguments).
In order to support new EEMI PM_IOCTL IDs (Secure Read/Write), this
support must be extended to support one additional argument, which
results in a configuration of - 1 EEMI API ID + 5 command arguments.
Update zynqmp_pm_invoke_fn() and do_fw_call() with this new definition
containing variable arguments. As a result, update all the references
to pm invoke function with the updated definition.
Co-developed-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112713.22718-2-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have _UID matching support for integer types, we can use
acpi_dev_uid_match() for it.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A bunch of fixes addressing issues around the notification support that
was added this cycle. They address issue in partition IDs handling in
ffa_notification_info_get(), notifications cleanup path and the size of
the allocation in ffa_partitions_cleanup().
It also adds check for the notification enabled state so that the drivers
registering the callbacks can be rejected if not enabled/supported.
It also moves the partitions setup operation after the notification
initialisation so that the driver has the correct state for notification
enabled/supported before the partitions are initialised/setup.
It also now allows FF-A initialisation to complete successfully even
when the notification initialisation fails as it is an optional support
in the specification. Initial support just allowed it only if the
firmware didn't support notifications.
Finally, it also adds a fix for smatch warning by declaring ffa_bus_type
structure in the header.
-----BEGIN PGP SIGNATURE-----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=mgRO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4Rj2
-----END PGP SIGNATURE-----
Merge tag 'ffa-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.7
A bunch of fixes addressing issues around the notification support that
was added this cycle. They address issue in partition IDs handling in
ffa_notification_info_get(), notifications cleanup path and the size of
the allocation in ffa_partitions_cleanup().
It also adds check for the notification enabled state so that the drivers
registering the callbacks can be rejected if not enabled/supported.
It also moves the partitions setup operation after the notification
initialisation so that the driver has the correct state for notification
enabled/supported before the partitions are initialised/setup.
It also now allows FF-A initialisation to complete successfully even
when the notification initialisation fails as it is an optional support
in the specification. Initial support just allowed it only if the
firmware didn't support notifications.
Finally, it also adds a fix for smatch warning by declaring ffa_bus_type
structure in the header.
* tag 'ffa-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix ffa_notification_info_get() IDs handling
firmware: arm_ffa: Fix the size of the allocation in ffa_partitions_cleanup()
firmware: arm_ffa: Fix FFA notifications cleanup path
firmware: arm_ffa: Add checks for the notification enabled state
firmware: arm_ffa: Setup the partitions after the notification initialisation
firmware: arm_ffa: Allow FF-A initialisation even when notification fails
firmware: arm_ffa: Declare ffa_bus_type structure in the header
Link: https://lore.kernel.org/r/20231116191603.929767-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A fix for possible truncation/overflow in the frequency computations
as both the performance value and the multiplier are 32bit values.
-----BEGIN PGP SIGNATURE-----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=1+Km
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X/Fy
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.7
A fix for possible truncation/overflow in the frequency computations
as both the performance value and the multiplier are 32bit values.
* tag 'scmi-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
Link: https://lore.kernel.org/r/20231204134724.30465-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Auto Update reprogramming of the FPGA fabric on
PolarFire SoC, using the fw_upload mechanism a la the
intel-m10-bmc-sec-update driver.
This driver only writes the image to the spi flash & performs
validation on it, as the entire FPGA becomes unusable during the actual
reprogramming of a bitstream. To initiate the reprogramming itself, a
device reset is required. The SBI SRST extension's "cold reboot" can
trigger such a device reset, provided corresponding support has been
enabled in the HSS (Hart Software Services), the provider of SBI runtime
services on PolarFire SoC.
While this is a driver responsible for the reprogramming of an FPGA,
there is no dynamic discovery of devices involved, as runtime
reconfiguration is not possible due to the device reset requirements.
Therefore FPGA manager subsystem is not used by this driver and the FPGA
subsystem maintainers were unwilling to accept it there.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The multiplier is already promoted to unsigned long, however the
frequency calculations done when using level indexing mode doesn't
use the multiplier computed. It instead hardcodes the multiplier
value of 1000 at all the usage sites.
Clean that up by assigning the multiplier value of 1000 when using
the perf level indexing mode and update the frequency calculations to
use the multiplier instead. It should fix the possible frequency
truncation for all the values greater than or equal to 4GHz on 64-bit
machines.
Fixes: 31c7c1397a ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fix the possible frequency truncation for all values equal to or greater
4GHz on 64bit machines by updating the multiplier 'mult_factor' to
'unsigned long' type. It is also possible that the multiplier itself can
be greater than or equal to 2^32. So we need to also fix the equation
computing the value of the multiplier.
Fixes: a9e3fbfaa0 ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Platform and agent supported protocols versions do not necessarily match.
When talking to an older SCMI platform, supporting only older protocol
versions, the kernel SCMI agent will downgrade the version of the used
protocol to match the platform and avoid compatibility issues.
In the case where the kernel/OSPM agent happens to communicate with a
newer platform which can support newer protocol versions unknown to
the agent, and potentially backward incompatible, the agent currently
carries on, silently, in a best-effort approach.
Note that the SCMI specification doesn't provide means to explicitly
detect the protocol versions used by the agents, neither it is required
to support multiple, older, protocol versions.
Add an explicit protocol version check to let the agent detect when this
version mismatch happens and warn the user about this condition.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231201135858.2367651-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The number of opps on certain variants of the X1E80100 SoC are greater
than current maximum of 16, so increase the MAX_OPP count to 32 (next
power of 2) to accommodate that.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231129065748.19871-4-quic_sibis@quicinc.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The scmi_perf_domain_lookup requires the protocol handle to have the
private data set, which is yet to happen during the fastchannel init
scenario. This results in a NULL pointer dereference. Fix this by using
the pre-populated perf_dom_info to pass on the required information
instead.
| scmi_perf_protocol_init+0x434/0x678
| scmi_get_protocol_instance+0x168/0x29c
| scmi_devres_protocol_instance_get+0x50/0xa0
| scmi_devm_protocol_get+0x20/0x50
| scmi_cpufreq_probe+0x34/0xd4
| scmi_dev_probe+0x28/0x3c
| really_probe+0x148/0x2ac
| __driver_probe_device+0x78/0x12c
| driver_probe_device+0x40/0x160
| __device_attach_driver+0xb8/0x134
| bus_for_each_drv+0x80/0xdc
| __device_attach+0xa8/0x1b0
| device_initial_probe+0x14/0x20
| bus_probe_device+0xa8/0xac
| device_add+0x5cc/0x778
| device_register+0x20/0x30
| __scmi_device_create.part.0+0xec/0x1cc
| scmi_device_create+0x180/0x1c4
| scmi_create_protocol_devices+0x4c/0xb0
| scmi_probe+0x660/0x738
| platform_probe+0x68/0xdc
| really_probe+0x148/0x2ac
| __driver_probe_device+0x78/0x12c
| driver_probe_device+0x40/0x160
| __device_attach_driver+0xb8/0x134
| bus_for_each_drv+0x80/0xdc
| __device_attach+0xa8/0x1b0
| device_initial_probe+0x14/0x20
| bus_probe_device+0xa8/0xac
| deferred_probe_work_func+0x88/0xc0
| process_one_work+0x13c/0x264
| worker_thread+0x32c/0x438
| kthread+0x118/0x11c
| ret_from_fork+0x10/0x20
Fixes: 619bc6e034 ("firmware: arm_scmi: Populate fastchannel info only if set operations are allowed")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231129065748.19871-2-quic_sibis@quicinc.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When a task needs to accept memory it will scan the accepting_list
to see if any ranges already being processed by other tasks overlap
with its range. Due to an off-by-one in the range comparisons, a task
might falsely determine that an overlapping range is being accepted,
leading to an unnecessary delay before it begins processing the range.
Fix the off-by-one in the range comparison to prevent this and slightly
improve performance.
Fixes: 50e782a86c ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance")
Link: https://lore.kernel.org/linux-mm/20231101004523.vseyi5bezgfaht5i@amd.com/T/#me2eceb9906fcae5fe958b3fe88e41f920f8335b6
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
