Certain operations on memory, such as memory repair, are permitted
only when the address and other attributes for the operation are
from the current boot. This is determined by checking whether the
memory attributes for the operation match those in the CXL gen_media
or CXL DRAM memory event records reported during the current boot.
The CXL event records must be backed up because they are cleared
in the hardware after being processed by the kernel.
Support is added for storing CXL gen_media or CXL DRAM memory event
records in xarrays. Old records are deleted when they expire or when
there is an overflow and which depends on platform correctly report
Event Record Timestamp field of CXL spec Table 8-55 Common Event
Record Format.
Additionally, helper functions are implemented to find a matching
record in the xarray storage based on the memory attributes and
repair type.
Add validity check, when matching attributes for sparing, using
the validity flag in the DRAM event record, to ensure that all
required attributes for a requested repair operation are valid and
set.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-7-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec 3.2 section 8.2.10.9.11.2 describes the DDR5 ECS (Error Check
Scrub) control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts.
The ECS control allows the requester to change the log entry type, the ECS
threshold count (provided the request falls within the limits specified in
DDR5 mode registers), switch between codeword mode and row count mode, and
reset the ECS counter.
Register with EDAC device driver, which retrieves the ECS attribute
descriptors from the EDAC ECS and exposes the ECS control attributes to
userspace via sysfs. For example, the ECS control for the memory media FRU0
in CXL mem0 device is located at /sys/bus/edac/devices/cxl_mem0/ecs_fru0/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-5-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec 3.2 section 8.2.10.9.11.1 describes the device patrol scrub
control feature. The device patrol scrub proactively locates and makes
corrections to errors in regular cycle.
Allow specifying the number of hours within which the patrol scrub must be
completed, subject to minimum and maximum limits reported by the device.
Also allow disabling scrub allowing trade-off error rates against
performance.
Add support for patrol scrub control on CXL memory devices.
Register with the EDAC device driver, which retrieves the scrub attribute
descriptors from EDAC scrub and exposes the sysfs scrub control attributes
to userspace. For example, scrub control for the CXL memory device
"cxl_mem0" is exposed in /sys/bus/edac/devices/cxl_mem0/scrubX/.
Additionally, add support for region-based CXL memory patrol scrub control.
CXL memory regions may be interleaved across one or more CXL memory
devices. For example, region-based scrub control for "cxl_region1" is
exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
[dj: A few formatting fixes from Jonathan]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-4-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and remove gotos for error
handling.
- Some followup patches to support dirty shutdown accounting
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands. Mostly in preparation for CXL EDAC
code to utilize the Features commands. It's also in preparation for CXL fwctl support
to utilize the CXL Features. The commands include "Get Supported Features", "Get Feature",
and "Set Feature".
- A series to support extended linear cache support described by the ACPI HMAT table. The
addition helps enumerate the cache and also provides additional RAS reporting support for
configuration with extended linear cache. (and related fixes for the
series).
- An update to cxl_test to support a 3-way capable CFMWS.
- A documentation fix to remove unused "mixed mode".
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmfqtP4ACgkQYGjFFmlT
OEqx9A//UsCWf1CH8bvjKXxSTlQmtPlNpcXe+gVR0sc5cL2VFxKf93AY8Zo1Br5A
b40gtZJz9QwjwGwIvDiki9U2bopOyX3aMOyBJMYmLuL/irY8ENx2ra7ODbxe7uGn
oZwpwG2sEGQxIAG2bCpVuCDIt8JjNvsTJo45TICs07w9TWTmH4Swpbz1g8VGpDz/
kCQcXXHSHZleR5BzqVRKxjjqGEUFj2xDMzAI8VSL+7izMMoPLbjwnl2c1fwaLBPd
iJTMboTXDj7eVMta/qqGkG7pshM81SnkSzy8cxImj3r4SRgRTZg9U8vhrR3K1kdH
F05Ozd12tljtNXLWthENZPUbfcovy9oTxzMt/gVut7j6C7H3s3KCSbV7zhz5BmfD
XcapOX4Cu7ptn88KLqE5a98oLuq2DXrLOcX5vKPYBfAO+68rC+gSAPSbzfZlSHa0
1/TsxVvzDQUBVZWL94DeHvemyQb58GQBOypeNZbH8P4gAhWJqk3hZEO+wlSxpfd+
R7wgabfKJUJ82KusCZHIW1Wg3/IrXb4yC+UyiObS5RgIJWpRmOkuJEHDvEUje+Dj
aOWw/H3vZgeZnpW87FRxzvDJx1/0jZI1vsxH65m2wrvz6n5aGIA/Q6pgqCdU/m6c
I231bl1bmZzJ8u3+vOZL4tFHcYHh4XCwQp+ZQt1uDa0fA5LbLhc=
=ZME1
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
Add fwctl support code to allow sending of CXL feature commands from
userspace through as ioctls via FWCTL. Provide initial setup bits. The
CXL PCI probe function will call devm_cxl_setup_fwctl() after the
cxl_memdev has been enumerated in order to setup FWCTL char device under
the cxl_memdev like the existing memdev char device for issuing CXL raw
mailbox commands from userspace via ioctls.
Link: https://patch.msgid.link/r/20250307205648.1021626-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add CXL Features support. Setup code for enabling in kernel usage of CXL
Features. Expecting EDAC/RAS to utilize CXL Features in kernel for
things such as memory sparing. Also prepartion for enabling of CXL FWCTL
support to issue allowed Features from user space.
Below is a setup with extended linear cache configuration with an example
layout of memory region shown below presented as a single memory region
consists of 256G memory where there's 128G of DRAM and 128G of CXL memory.
The kernel sees a region of total 256G of system memory.
128G DRAM 128G CXL memory
|-----------------------------------|-------------------------------------|
Data resides in either DRAM or far memory (FM) with no replication. Hot
data is swapped into DRAM by the hardware behind the scenes. When error is
detected in one location, it is possible that error also resides in the
aliased location. Therefore when a memory location that is flagged by MCE
is part of the special region, the aliased memory location needs to be
offlined as well.
Add an mce notify callback to identify if the MCE address location is part
of an extended linear cache region and handle accordingly.
Added symbol export to set_mce_nospec() in x86 code in order to call
set_mce_nospec() from the CXL MCE notify callback.
Link: https://lore.kernel.org/linux-cxl/668333b17e4b2_5639294fd@dwillia2-xfh.jf.intel.com.notmuch/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec r3.2 8.2.9.6.1 Get Supported Features (Opcode 0500h)
The command retrieve the list of supported device-specific features
(identified by UUID) and general information about each Feature.
The driver will retrieve the Feature entries in order to make checks and
provide information for the Get Feature and Set Feature command. One of
the main piece of information retrieved are the effects a Set Feature
command would have for a particular feature. The retrieved Feature
entries are stored in the cxl_mailbox context.
The setup of Features is initiated via devm_cxl_setup_features() during the
pci probe function before the cxl_memdev is enumerated.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When the CXL subsystem is built-in the module init order is determined
by Makefile order. That order violates expectations. The expectation is
that cxl_acpi and cxl_mem can race to attach. If cxl_acpi wins the race,
cxl_mem will find the enabled CXL root ports it needs. If cxl_acpi loses
the race it will retrigger cxl_mem to attach via cxl_bus_rescan(). That
flow only works if cxl_acpi can assume ports are enabled immediately
upon cxl_acpi_probe() return. That in turn can only happen in the
CONFIG_CXL_ACPI=y case if the cxl_port driver is registered before
cxl_acpi_probe() runs.
Fix up the order to prevent initialization failures. Ensure that
cxl_port is built-in when cxl_acpi is also built-in, arrange for
Makefile order to resolve the subsys_initcall() order of cxl_port and
cxl_acpi, and arrange for Makefile order to resolve the
device_initcall() (module_init()) order of the remaining objects.
As for what contributed to this not being found earlier, the CXL
regression environment, cxl_test, builds all CXL functionality as a
module to allow to symbol mocking and other dynamic reload tests. As a
result there is no regression coverage for the built-in case.
Reported-by: Gregory Price <gourry@gourry.net>
Closes: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net
Tested-by: Gregory Price <gourry@gourry.net>
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Cc: stable@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/172988474904.476062.7961350937442459266.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
The x86 implementation of range-to-target_node lookup (i.e.
phys_to_target_node() and memory_add_physaddr_to_nid()) relies on
numa_memblks.
Since numa_memblks are now part of the generic code, move these functions
from x86 to mm/numa_memblks.c and select CONFIG_NUMA_KEEP_MEMINFO when
CONFIG_NUMA_MEMBLKS=y for dax and cxl.
[rppt@kernel.org: fix build]
Link: https://lkml.kernel.org/r/ZtVfSt_zloPdDqVB@kernel.org
Link: https://lkml.kernel.org/r/20240807064110.1003856-26-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The CXL driver uses both functions phys_to_target_node() and
memory_add_physaddr_to_nid(). The x86 architecture relies on the
NUMA_KEEP_MEMINFO kernel option enabled for both functions to work
correct. Update Kconfig to make sure the option is always enabled for
the driver.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: http://lore.kernel.org/r/65f8b191c0422_aa222941b@dwillia2-mobl3.amr.corp.intel.com.notmuch
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240424154756.2152614-1-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 5d7107c727 ("perf: CXL Performance Monitoring Unit driver")
added the config entries for CXL_PMU in drivers/cxl/Kconfig and
drivers/perf/Kconfig, so it can be toggled from multiple locations:
[1] Device Drivers
-> PCI support
-> CXL (Compute Expres Link) Devices
-> CXL Performance Monitoring Unit
[2] Device Drivers
-> Performance monitor support
-> CXL Performance Monitoring Unit
This complicates things, and nobody else does this.
I kept the one in drivers/perf/Kconfig because CONFIG_CXL_PMU controls
the compilation of drivers/perf/cxl_pmu.c.
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Provide a callback function to the CDAT parser in order to parse the
Device Scoped Memory Affinity Structure (DSMAS). Each DSMAS structure
contains the DPA range and its associated attributes in each entry. See
the CDAT specification for details. The device handle and the DPA range
is saved and to be associated with the DSLBIS locality data when the
DSLBIS entries are parsed. The xarray is a local variable. When the
total path performance data is calculated and storred this xarray can be
discarded.
Coherent Device Attribute Table 1.03 2.1 Device Scoped memory Affinity
Structure (DSMAS)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319619355.2212653.2675953129671561293.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When FW_LOADER is disabled, cxl fails to link:
arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload':
memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register'
memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister'
In order to use the firmware_upload_register() function, both FW_LOADER
and FW_UPLOAD have to be enabled, which is a bit confusing. In addition,
the dependency is on the wrong symbol, as the caller is part of the
cxl_core.ko module, not the cxl_mem.ko module.
Fixes: 9521875bbe ("cxl: add a firmware update mechanism using the sysfs firmware loader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230703112928.332321-1-arnd@kernel.org
Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Pick up initial support for the CXL 3.0 performance monitoring
definition. Small conflicts with the firmware update work as they both
placed their init code in the same location.
CXL rev 3.0 introduces a standard performance monitoring hardware
block to CXL. Instances are discovered using CXL Register Locator DVSEC
entries. Each CXL component may have multiple PMUs.
This initial driver supports a subset of types of counter.
It supports counters that are either fixed or configurable, but requires
that they support the ability to freeze and write value whilst frozen.
Development done with QEMU model which will be posted shortly.
Example:
$ perf stat -a -e cxl_pmu_mem0.0/h2d_req_snpcur/ -e cxl_pmu_mem0.0/h2d_req_snpdata/ -e cxl_pmu_mem0.0/clock_ticks/ sleep 1
Performance counter stats for 'system wide':
96,757,023,244,321 cxl_pmu_mem0.0/h2d_req_snpcur/
96,757,023,244,365 cxl_pmu_mem0.0/h2d_req_snpdata/
193,514,046,488,653 cxl_pmu_mem0.0/clock_ticks/
1.090539600 seconds time elapsed
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230526095824.16336-5-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The sysfs based firmware loader mechanism was created to easily allow
userspace to upload firmware images to FPGA cards. This also happens to
be pretty suitable to create a user-initiated but kernel-controlled
firmware update mechanism for CXL devices, using the CXL specified
mailbox commands.
Since firmware update commands can be long-running, and can be processed
in the background by the endpoint device, it is desirable to have the
ability to chunk the firmware transfer down to smaller pieces, so that
one operation does not monopolize the mailbox, locking out any other
long running background commands entirely - e.g. security commands like
'sanitize' or poison scanning operations.
The firmware loader mechanism allows a natural way to perform this
chunking, as after each mailbox command, that is restricted to the
maximum mailbox payload size, the cxl memdev driver relinquishes control
back to the fw_loader system and awaits the next chunk of data to
transfer. This opens opportunities for other background commands to
access the mailbox and send their own slices of background commands.
Add the necessary helpers and state tracking to be able to perform the
'Get FW Info', 'Transfer FW', and 'Activate FW' mailbox commands as
described in the CXL spec. Wire these up to the firmware loader
callbacks, and register with that system to create the memX/firmware/
sysfs ABI.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230602-vv-fw_update-v4-1-c6265bd7343b@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
Add help text and a label so the CXL_REGION config option can be
toggled. This is mainly to enable compile testing without region
support.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601998765.1924368.258370414771847699.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A "DPA invalidation event" is any scenario where the contents of a DPA
(Device Physical Address) is modified in a way that is incoherent with
CPU caches, or if the HPA (Host Physical Address) to DPA association
changes due to a remapping event.
PMEM security events like Unlock and Passphrase Secure Erase already
manage caches through LIBNVDIMM, so that leaves HPA to DPA remap events
that need cache management by the CXL core. Those only happen when the
boot time CXL configuration has changed. That event occurs when
userspace attaches an endpoint decoder to a region configuration, and
that region is subsequently activated.
The implications of not invalidating caches between remap events is that
reads from the region at different points in time may return different
results due to stale cached data from the previous HPA to DPA mapping.
Without a guarantee that the region contents after cxl_region_probe()
are written before being read (a layering-violation assumption that
cxl_region_probe() can not make) the CXL subsystem needs to ensure that
reads that precede writes see consistent results.
A CONFIG_CXL_REGION_INVALIDATION_TEST option is added to support debug
and unit testing of the CXL implementation in QEMU or other environments
where cpu_cache_has_invalidate_memregion() returns false. This may prove
too restrictive for QEMU where the HDM decoders are emulated, but in
that case the CXL subsystem needs some new mechanism / indication that
the HDM decoder is emulated and not a passthrough of real hardware.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993222098.1995348.16604163596374520890.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After a region's interleave parameters (ways and granularity) are set,
add a way for regions to allocate HPA (host physical address space) from
the free capacity in their parent root-decoder. The allocator for this
capacity reuses the 'struct resource' based allocator used for
CONFIG_DEVICE_PRIVATE.
Once the tuple of "ways, granularity, [uuid], and size" is set the
region configuration transitions to the CXL_CONFIG_INTERLEAVE_ACTIVE
state which is a precursor to allowing endpoint decoders to be added to
a region.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784335630.1758207.420216490941955417.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
DOE mailbox objects will be needed for various mailbox communications
with each memory device.
Iterate each DOE mailbox capability and create PCI DOE mailbox objects
as found.
It is not anticipated that this is the final resting place for the
iteration of the DOE devices. The support of switch ports will drive
this code into the PCIe side. In this imagined architecture the CXL
port driver would then query into the PCI device for the DOE mailbox
array.
For now creating the mailboxes in the CXL port is good enough for the
endpoints. Later PCIe ports will need to support this to support switch
ports more generically.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220719205249.566684-5-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.
Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.
It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.
Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.
Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
At this point the subsystem can enumerate all CXL ports (CXL.mem decode
resources in upstream switch ports and host bridges) in a system. The
last mile is connecting those ports to endpoints.
The cxl_mem driver connects an endpoint device to the platform CXL.mem
protoctol decode-topology. At ->probe() time it walks its
device-topology-ancestry and adds a CXL Port object at every Upstream
Port hop until it gets to CXL root. The CXL root object is only present
after a platform firmware driver registers platform CXL resources. For
ACPI based platform this is managed by the ACPI0017 device and the
cxl_acpi driver.
The ports are registered such that disabling a given port automatically
unregisters all descendant ports, and the chain can only be registered
after the root is established.
Given ACPI device scanning may run asynchronously compared to PCI device
scanning the root driver is tasked with rescanning the bus after the
root successfully probes.
Conversely if any ports in a chain between the root and an endpoint
becomes disconnected it subsequently triggers the endpoint to
unregister. Given lock depenedencies the endpoint unregistration happens
in a workqueue asynchronously. If userspace cares about synchronizing
delayed work after port events the /sys/bus/cxl/flush attribute is
available for that purpose.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[djbw: clarify changelog, rework hotplug support]
Link: https://lore.kernel.org/r/164398782997.903003.9725273241627693186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The need for a CXL port driver and a dedicated cxl_bus_type is driven by
a need to simultaneously support 2 independent physical memory decode
domains (cache coherent CXL.mem and uncached PCI.mmio) that also
intersect at a single PCIe device node. A CXL Port is a device that
advertises a CXL Component Register block with an "HDM Decoder
Capability Structure".
>From Documentation/driver-api/cxl/memory-devices.rst:
Similar to how a RAID driver takes disk objects and assembles them into
a new logical device, the CXL subsystem is tasked to take PCIe and ACPI
objects and assemble them into a CXL.mem decode topology. The need for
runtime configuration of the CXL.mem topology is also similar to RAID in
that different environments with the same hardware configuration may
decide to assemble the topology in contrasting ways. One may choose
performance (RAID0) striping memory across multiple Host Bridges and
endpoints while another may opt for fault tolerance and disable any
striping in the CXL.mem topology.
The port driver identifies whether an endpoint Memory Expander is
connected to a CXL topology. If an active (bound to the 'cxl_port'
driver) CXL Port is not found at every PCIe Switch Upstream port and an
active "root" CXL Port then the device is just a plain PCIe endpoint
only capable of participating in PCI.mmio and DMA cycles, not CXL.mem
coherent interleave sets.
The 'cxl_port' driver lets the CXL subsystem leverage driver-core
infrastructure for setup and teardown of register resources and
communicating device activation status to userspace. The cxl_bus_type
can rendezvous the async arrival of platform level CXL resources (via
the 'cxl_acpi' driver) with the asynchronous enumeration of Memory
Expander endpoints, while also implementing a hierarchical locking model
independent of the associated 'struct pci_dev' locking model. The
locking for dport and decoder enumeration is now handled in the core
rather than callers.
For now the port driver only enumerates and registers CXL resources
(downstream port metadata and decoder resources) later it will be used
to take action on its decoders in response to CXL.mem region
provisioning requests.
Note1: cxlpci.h has long depended on pci.h, but port.c was the first to
not include pci.h. Carry that dependency in cxlpci.h.
Note2: cxl port enumeration and probing complicates CXL subsystem init
to the point that it helps to have centralized debug logging of probe
events in cxl_bus_probe().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The cxl_mem module was renamed cxl_pci in commit 21e9f76733 ("cxl:
Rename mem to pci"). In preparation for adding an ancillary driver for
cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and
rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for
that new driver to manage CXL.mem endpoint operations.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/164298412409.3018233.12407355692407890752.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The cxl_acpi driver originally open-coded its table parsing since the
ACPI subtable helpers were marked __init and only used in early NUMA
initialization. Now that those helpers have been exported for driver
usage replace the open-coded solution with the common one.
Cc: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/163553710810.2509508.14686373989517930921.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Register an 'nvdimm-bridge' device to act as an anchor for a libnvdimm
bus hierarchy. Also, flesh out the cxl_bus definition to allow a
cxl_nvdimm_bridge_driver to attach to the bridge and trigger the
nvdimm-bus registration.
The creation of the bridge is gated on the detection of a PMEM capable
address space registered to the root. The bridge indirection allows the
libnvdimm module to remain unloaded on platforms without PMEM support.
Given that the probing of ACPI0017 is asynchronous to CXL endpoint
devices, and the expectation that CXL endpoint devices register other
PMEM resources on the 'CXL' nvdimm bus, a workqueue is added. The
workqueue is needed to run bus_rescan_devices() outside of the
device_lock() of the nvdimm-bridge device to rendezvous nvdimm resources
as they arrive. For now only the bus is taken online/offline in the
workqueue.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909706.2993820.14051258608641140169.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CONFIG_CXL_BUS is default 'n' as expected for new functionality. When
that is enabled do not make the end user hunt for all the expected
sub-options to enable. For example CONFIG_CXL_BUS without CONFIG_CXL_MEM
is an odd/expert configuration, so is CONFIG_CXL_MEM without
CONFIG_CXL_ACPI (on ACPI capable platforms). Default CONFIG_CXL_MEM and
CONFIG_CXL_ACPI to CONFIG_CXL_BUS.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325450105.2293126.17046356425194082921.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While CXL builds upon the PCI software model for enumeration and
endpoint control, a static platform component is required to bootstrap
the CXL memory layout. Similar to how ACPI identifies root-level PCI
memory resources, ACPI data enumerates the address space and interleave
configuration for CXL Memory.
In addition to identifying host bridges, ACPI is responsible for
enumerating the CXL memory space that can be addressed by downstream
decoders. This is similar to the requirement for ACPI to publish
resources via the _CRS method for PCI host bridges. Specifically, ACPI
publishes a table, CXL Early Discovery Table (CEDT), which includes a
list of CXL Memory resources, CXL Fixed Memory Window Structures
(CFMWS).
For now, introduce the core infrastructure for a cxl_port hierarchy
starting with a root level anchor represented by the ACPI0017 device.
Follow on changes model support for the configurable decode capabilities
of cxl_port instances, i.e. CXL switch support.
Co-developed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325449515.2293126.15303270193010154608.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As the driver has undergone development, it's become clear that the
majority [entirety?] of the current functionality in mem.c is actually a
layer encapsulating functionality exposed through PCI based
interactions. This layer can be used either in isolation or to provide
functionality for higher level functionality.
CXL capabilities exist in a parallel domain to PCIe. CXL devices are
enumerable and controllable via "legacy" PCIe mechanisms; however, their
CXL capabilities are a superset of PCIe. For example, a CXL device may
be connected to a non-CXL capable PCIe root port, and therefore will not
be able to participate in CXL.mem or CXL.cache operations, but can still
be accessed through PCIe mechanisms for CXL.io operations.
To properly represent the PCI nature of this driver, and in preparation for
introducing a new driver for the CXL.mem / HDM decoder (Host-managed Device
Memory) capabilities of a CXL memory expander, rename mem.c to pci.c so that
mem.c is available for this new driver.
The result of the change is that there is a clear layering distinction
in the driver, and a systems administrator may load only the cxl_pci
module and gain access to such operations as, firmware update, offline
provisioning of devices, and error collection. In addition to freeing up
the file name for another purpose, there are two primary reasons this is
useful,
1. Acting upon devices which don't have full CXL capabilities. This
may happen for instance if the CXL device is connected in a CXL
unaware part of the platform topology.
2. Userspace-first provisioning for devices without kernel driver
interference. This may be useful when provisioning a new device
in a specific manner that might otherwise be blocked or prevented
by the real CXL mem driver.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210526174413.802913-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL memory device send interface will have a number of supported
commands. The raw command is not such a command. Raw commands allow
userspace to send a specified opcode to the underlying hardware and
bypass all driver checks on the command. The primary use for this
command is to [begrudgingly] allow undocumented vendor specific hardware
commands.
While not the main motivation, it also allows prototyping new hardware
commands without a driver patch and rebuild.
While this all sounds very powerful it comes with a couple of caveats:
1. Bug reports using raw commands will not get the same level of
attention as bug reports using supported commands (via taint).
2. Supported commands will be rejected by the RAW command.
With this comes new debugfs knob to allow full access to your toes with
your weapon of choice.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ariel Sibley <Ariel.Sibley@microchip.com>
Link: https://lore.kernel.org/r/20210217040958.1354670-6-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL.mem protocol allows a device to act as a provider of "System
RAM" and/or "Persistent Memory" that is fully coherent as if the memory
was attached to the typical CPU memory controller.
With the CXL-2.0 specification a PCI endpoint can implement a "Type-3"
device interface and give the operating system control over "Host
Managed Device Memory". See section 2.3 Type 3 CXL Device.
The memory range exported by the device may optionally be described by
the platform firmware memory map, or by infrastructure like LIBNVDIMM to
provision persistent memory capacity from one, or more, CXL.mem devices.
A pre-requisite for Linux-managed memory-capacity provisioning is this
cxl_mem driver that can speak the mailbox protocol defined in section
8.2.8.4 Mailbox Registers.
For now just land the initial driver boiler-plate and Documentation/
infrastructure.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: David Rientjes <rientjes@google.com> (v1)
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://www.computeexpresslink.org/download-the-specification
Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
