Rather than setting up the fallback request by hand, use
ahash_request_set_callback() and ahash_request_set_crypt() API helpers
to properly setup the new request.
This also ensures that the completion callback is properly passed down
to the fallback algorithm, which avoids a crash with async fallbacks.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting up the fallback request by hand, use
ahash_request_set_callback() and ahash_request_set_crypt() API helpers
to properly setup the new request.
This also ensures that the completion callback is properly passed down
to the fallback algorithm, which avoids a crash with async fallbacks.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces the CRYPTO_ALG_KERN_DRIVER_ONLY flag to the
atmel-aes, atmel-sha, and atmel-tdes drivers. This flag is set for
hardware accelerated ciphers accessible through a kernel driver only,
which is the case of these drivers.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge crypto tree to pick up scompress and caam fixes. The scompress
fix has a non-trivial resolution as the code in question has moved
over to acompress.
Ensure refcount is raised before request is enqueued since it could
be dequeued before the call returns.
Reported-by: Sean Anderson <sean.anderson@linux.dev>
Cc: <stable@vger.kernel.org>
Fixes: 11144416a7 ("crypto: caam/qi - optimize frame queue cleanup")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The recent reordering of code in sev_ioctl_do_pdh_export triggered
a false-positive may-be-uninitialized warning from gcc:
In file included from ../include/linux/sched/task.h:13,
from ../include/linux/sched/signal.h:9,
from ../include/linux/rcuwait.h:6,
from ../include/linux/percpu-rwsem.h:7,
from ../include/linux/fs.h:34,
from ../include/linux/compat.h:17,
from ../arch/x86/include/asm/ia32.h:7,
from ../arch/x86/include/asm/elf.h:10,
from ../include/linux/elf.h:6,
from ../include/linux/module.h:19,
from ../drivers/crypto/ccp/sev-dev.c:11:
In function ‘copy_to_user’,
inlined from ‘sev_ioctl_do_pdh_export’ at ../drivers/crypto/ccp/sev-dev.c:2036:7,
inlined from ‘sev_ioctl’ at ../drivers/crypto/ccp/sev-dev.c:2249:9:
../include/linux/uaccess.h:225:16: warning: ‘input_cert_chain_address’ may be used uninitialized [-Wmaybe-uninitialized]
225 | return _copy_to_user(to, from, n);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/crypto/ccp/sev-dev.c: In function ‘sev_ioctl’:
../drivers/crypto/ccp/sev-dev.c:1961:22: note: ‘input_cert_chain_address’ was declared here
1961 | void __user *input_cert_chain_address;
| ^~~~~~~~~~~~~~~~~~~~~~~~
Silence it by moving the initialisation of the variables in question
prior to the NULL check.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting up the fallback request by hand, use
ahash_request_set_callback() and ahash_request_set_crypt() API helpers
to properly setup the new request.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add IS_ENABLED(CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG) checks before the
fallback counter updates to make sure the code is not included when
debugfs statistics support is not enabled.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'struct sun8i_ce_alg_template' is always defined, even with
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG disabled, so the ifdef guards
are not needed.
Make sure the statistics have IS_ENABLED() checks instead.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to reduce code duplication, factor out to a separate function
the codepath that increments debugfs fallback stats.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove duplicated fallback checks in sun8i_ce_hash_digest(). The same
checks are already done previously in sun8i_ce_hash_need_fallback().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rework error handling in sun8i_ce_hash_run() to unmap the dma buffers in
case of failure. Currently, the dma unmap functions are not called if the
function errors out at various points.
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SNP initialization is forced during PSP driver probe purely because SNP
can't be initialized if VMs are running. But the only in-tree user of
SEV/SNP functionality is KVM, and KVM depends on PSP driver for the same.
Forcing SEV/SNP initialization because a hypervisor could be running
legacy non-confidential VMs make no sense.
This patch removes SEV/SNP initialization from the PSP driver probe
time and moves the requirement to initialize SEV/SNP functionality
to KVM if it wants to use SEV/SNP.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the names of the defines for PCI IDs to follow the standard
naming convention `PCI_DEVICE_ID_<DEVICE NAME>`.
Also drop the unnecessary inner comma from the pci_device_id tables that
use these definitions.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't populate the read-only arrays sha256_init, sha224_init, sha1_init
and md5_init on the stack at run time, instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of manually adding attribute groups, set dev_groups pointer to
have the driver core do it.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of manually adding attribute groups, set dev_groups pointer to
have the driver core do it.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The BITS_IN_DWORD() macro, which represents the number of bits in the
registers accessed by the firmware loader, is currently defined as 32.
For consistency and readability, replace this macro with the existing
BITS_PER_TYPE() macro, which serves the same purpose.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The structures adf_hw_device_class_* are static.
Remove initialization to zero of the field instance as it is zero
by C convention.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c3xxx 0000:3f:00.0: qat_hal_clr_reset error
c3xxx 0000:3f:00.0: Failed to init the AEs
c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
c3xxx 0000:3f:00.0: Resetting device qat_dev0
c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of the adf_driver structure and remove the redundant
prototypes for the functions adf_probe() and adf_remove() in the
qat_c3xxx driver.
Also move the pci_device_id table close to where it is used and drop the
inner comma as it is not required.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c6xx 0000:3f:00.0: qat_hal_clr_reset error
c6xx 0000:3f:00.0: Failed to init the AEs
c6xx 0000:3f:00.0: Failed to initialise Acceleration Engine
c6xx 0000:3f:00.0: Resetting device qat_dev0
c6xx 0000:3f:00.0: probe with driver c6xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: a6dabee6c8 ("crypto: qat - add support for c62x accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of the adf_driver structure and remove the redundant
prototypes for the functions adf_probe() and adf_remove() in the
qat_c62x driver.
Also move the pci_device_id table close to where it is used and drop the
inner comma as it is not required.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of the adf_driver structure and remove the redundant
prototypes for the functions adf_probe() and adf_remove() in the
qat_dh895xxcc driver.
Also move the pci_device_id table close to where it is used and drop the
inner comma as it is not required.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
420xx 0000:01:00.0: Failed to power up the device
420xx 0000:01:00.0: Failed to initialize device
420xx 0000:01:00.0: Resetting device qat_dev0
420xx 0000:01:00.0: probe with driver 420xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
4xxx 0000:01:00.0: Failed to power up the device
4xxx 0000:01:00.0: Failed to initialize device
4xxx 0000:01:00.0: Resetting device qat_dev0
4xxx 0000:01:00.0: probe with driver 4xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Link: https://lore.kernel.org/all/Z-DGQrhRj9niR9iZ@gondor.apana.org.au/
Reported-by: Randy Wright <rwright@hpe.com>
Closes: https://issues.redhat.com/browse/RHEL-84366
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than setting up a request by hand, use the correct API helpers
to setup the new request. This is because the API helpers will setup
chaining.
Also change the fallback allocation to explicitly request for a
sync algorithm as this driver will crash if given an async one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new API interface to do SEV/SNP platform shutdown when KVM module
is unloaded.
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the SNP panic notifier is registered on module initialization
regardless of whether SNP is being enabled or initialized.
Instead, register the SNP panic notifier only when SNP is actually
initialized and unregister the notifier when SNP is shutdown.
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implicit SNP initialization as part of some SNP ioctls modify TMR size
to be SNP compliant which followed by SNP shutdown will leave the
TMR size modified and then subsequently cause SEV only initialization
to fail, hence, reset TMR size to default at SNP Shutdown.
Acked-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the behavior of implicit SEV initialization in some of the
SEV ioctls to do both SEV initialization and shutdown and add
implicit SNP initialization and shutdown to some of the SNP ioctls
so that the change of SEV/SNP platform initialization not being
done during PSP driver probe time does not break userspace tools
such as sevtool, etc.
Prior to this patch, SEV has always been initialized before these
ioctls as SEV initialization is done as part of PSP module probe,
but now with SEV initialization being moved to KVM module load instead
of PSP driver probe, the implied SEV INIT actually makes sense and gets
used and additionally to maintain SEV platform state consistency
before and after the ioctl SEV shutdown needs to be done after the
firmware call.
It is important to do SEV Shutdown here with the SEV/SNP initialization
moving to KVM, an implicit SEV INIT here as part of the SEV ioctls not
followed with SEV Shutdown will cause SEV to remain in INIT state and
then a future SNP INIT in KVM module load will fail.
Also ensure that for these SEV ioctls both implicit SNP and SEV INIT is
done followed by both SEV and SNP shutdown as RMP table must be
initialized before calling SEV INIT if SNP host support is enabled.
Similarly, prior to this patch, SNP has always been initialized before
these ioctls as SNP initialization is done as part of PSP module probe,
therefore, to keep a consistent behavior, SNP init needs to be done
here implicitly as part of these ioctls followed with SNP shutdown
before returning from the ioctl to maintain the consistent platform
state before and after the ioctl.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modifying the crypto_request turns out to be not the right way to handle
the stale value issue with the IV. Though the IV is not used for AES ECB,
it eventually get used in algorithms like LRW in the next step after
AES ECB encryption/decryption. Setting req->iv to NULL breaks the
implementation of such algorithms. Hence modify only the local reqctx
to check for IV.
Fixes: bde5582208 ("crypto: tegra - Set IV to NULL explicitly for AES ECB")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move dev_info and dev_err messages related to SEV/SNP initialization
and shutdown into __sev_platform_init_locked(), __sev_snp_init_locked()
and __sev_platform_shutdown_locked(), __sev_snp_shutdown_locked() so
that they don't need to be issued from callers.
This allows both _sev_platform_init_locked() and various SEV/SNP ioctls
to call __sev_platform_init_locked(), __sev_snp_init_locked() and
__sev_platform_shutdown_locked(), __sev_snp_shutdown_locked() for
implicit SEV/SNP initialization and shutdown without additionally
printing any errors/success messages.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If SNP host support (SYSCFG.SNPEn) is set, then the RMP table must
be initialized before calling SEV INIT.
In other words, if SNP_INIT(_EX) is not issued or fails then
SEV INIT will fail if SNP host support (SYSCFG.SNPEn) is enabled.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The req->base.data field is for the user and must not be touched by
the driver, unless you save it first.
The iaa driver doesn't seem to be using the req->base.data value
so just remove the assignment.
Fixes: 09646c98d0 ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than passing around a CRC between the functions, embed it
into the acomp_request context.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove cavium/zip as it is obsolete and stands in the way of
acomp API work. If this is ever resurrected, please turn it
into an acomp driver.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The compiler gcc 12 warns about the IV buffer being uninitialized
in crypto4xx_crypt. Silence the warning by using the new gcc 12
access attribute to mark crypto4xx_build_pd.
Also fix the IV buffer length as it has been quadrupled (64 instead
of 16).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the EIP93 HASH functions, the eip93_put_descriptor is called without
acquiring lock. This is problematic when multiple thread execute hash
operations.
Correctly acquire ring write lock on calling eip93_put_descriptor to
prevent concurrent access and mess with the ring pointers.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
The 'comp' API is obsolete and will be removed, so remove this comp
implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only remaining user of 842 compression has been migrated to the
acomp compression API, and so the NX hardware driver has to follow suit,
given that no users of the obsolete 'comp' API remain, and it is going
to be removed.
So migrate the NX driver code to scomp. These will be wrapped and
exposed as acomp implementation via the crypto subsystem's
acomp-to-scomp adaptation layer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The compiler correctly warns that hv_nxc may be used uninitialised
as that will occur when NX-GZIP is unavailable.
Fix it by rearranging the code and delay setting caps_feat until
the final query succeeds.
Fixes: b4ba22114c ("crypto/nx: Get NX capabilities for GZIP coprocessor type")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use desc instead of a stack buffer in the final function. This
fixes a compiler warning about buf being uninitialised.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Any driver that needs these library functions should already be selecting
the corresponding Kconfig symbols, so there is no real point in making
these visible.
The original patch that made these user selectable described problems
with drivers failing to select the code they use, but for consistency
it's better to always use 'select' on a symbol than to mix it with
'depends on'.
Fixes: e56e189855 ("lib/crypto: add prompts back to crypto libraries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory requested to hold the image data for authentication will
never exceed `ICP_QAT_CSS_RSA4K_MAX_IMAGE_LEN`. Therefore, we can
simplify the allocation by always requesting the maximum size needed for
any image.
Also introduce the following checks:
* Ensure the allocated memory is 8-byte aligned to meet the
requirements of the authentication firmware.
* Prevent overflow when constructing the authentication descriptor.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The FW image size check is already performed in the function
qat_uclo_check_image() before calling `qat_uclo_map_auth_fw()`.
Therefore, the additional check in `qat_uclo_map_auth_fw()` is redundant
and can be safely removed.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the members `css_key` and `css_signature` which are not used for
doing the firmware authentication.
The signed image pointer can be calculated using the pointer to the CSS
header and the length of the CSS header, making these members redundant.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building for 32-bit targets, for which ssize_t is 'int' instead of
'long', there is a warning due to an incorrect format specifier:
In file included from include/linux/printk.h:610,
from include/linux/kernel.h:31,
from include/linux/clk.h:13,
from drivers/crypto/tegra/tegra-se-hash.c:7:
drivers/crypto/tegra/tegra-se-hash.c: In function 'tegra_sha_prep_cmd':
drivers/crypto/tegra/tegra-se-hash.c:343:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'ssize_t' {aka 'int'} [-Werror=format=]
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
drivers/crypto/tegra/tegra-se-hash.c:343:59: note: format string is defined here
343 | dev_dbg(se->dev, "msg len %llu msg left %llu sz %lu cfg %#x",
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as errors
Use '%zd', the proper specifier for ssize_t, to resolve the warning.
Fixes: ff4b7df0b5 ("crypto: tegra - Fix HASH intermediate result handling")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the representation of fuses in the accelerator device
structure from a single value to an array.
This allows the structure to accommodate additional fuses that
are required for future generations of QAT hardware.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the ADF_CSR_WR_LO_HI macro to simplify writing a 64-bit values
to hardware registers.
This macro works by splitting the 64-bit value into two 32-bit segments,
which are then written separately to the specified lower and upper
register offsets.
Update the adf_gen4_set_ssm_wdtimer() function to utilize this newly
introduced macro.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tfm argument is completely unused and meaningless as the
same stream object is identical over all transforms of a given
algorithm. Remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We are trying to get rid of all multiplications from allocation
functions to prevent potential integer overflows. Here the
multiplication is probably safe, but using kcalloc() is more
appropriate and improves readability. This patch has no effect
on runtime behavior.
Link: https://github.com/KSPP/linux/issues/162 [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch addresses an issue where authentication failures were being
erroneously reported due to negative test failures in the "ccm(aes)"
selftest.
pr_debug suppress unnecessary screaming of these tests.
Signed-off-by: Shashank Gupta <shashankg@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
virtcrypto_clear_request() does the same as the code here, but uses
kfree_sensitive() for one of the free operation.
So, better safe than sorry, use virtcrypto_clear_request() directly to
save a few lines of code and cleanly free the memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test the correct flags for the MAY_SLEEP bit.
Fixes: 2ec6761df8 ("crypto: iaa - Add support for deflate-iaa compression algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The intermediate results for HMAC is stored in the allocated keyslot by
the hardware. Dynamic allocation of keyslot during an operation is hence
not possible. As the number of keyslots are limited in the hardware,
fallback to the HMAC software implementation if keyslots are not available
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HW supports only storing 15 keys at a time. This limits the number
of tfms that can work without failutes. Reserve keyslots to solve this
and use the reserved ones during the encryption/decryption operation.
This allow users to have the capability of hardware protected keys
and faster operations if there are limited number of tfms while not
halting the operation if there are more tfms.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It may happen that the variable req->iv may have stale values or
zero sized buffer by default and may end up getting used during
encryption/decryption. This inturn may corrupt the results or break the
operation. Set the req->iv variable to NULL explicitly for algorithms
like AES-ECB where IV is not used.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Saving and restoring of the intermediate results are needed if there is
context switch caused by another ongoing request on the same engine.
This is therefore not only to support import/export functionality.
Hence, save and restore the intermediate result for every non-first task.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The intermediate hash values generated during an update task were
handled incorrectly in the driver. The values have a defined format for
each algorithm. Copying and pasting from the HASH_RESULT register
balantly would not work for all the supported algorithms. This incorrect
handling causes failures when there is a context switch between multiple
operations.
To handle the expected format correctly, add a separate buffer for
storing the intermediate results for each request. Remove the previous
copy/paste functions which read/wrote to the registers directly. Instead
configure the hardware to get the intermediate result copied to the
buffer and use host1x path to restore the intermediate hash results.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ahash init() function was called asynchronous to the crypto engine queue.
This could corrupt the request context if there is any ongoing operation
for the same request. Queue the init function as well to the crypto
engine queue so that this scenario can be avoided.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialize and check the return value in hash *do_one_req() functions
and exit the function if there is an error. This fixes the
'uninitialized variable' warnings reported by testbots.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202412071747.flPux4oB-lkp@intel.com/
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call the crypto finalize function before exiting *do_one_req() functions.
This allows the driver to take up further requests even if the previous
one fails.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate the buffer based on the request instead of a fixed buffer
length. In operations which may require larger buffer size, a fixed
buffer may fail.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buffer which sends the commands to host1x was shared for all tasks
in the engine. This causes a problem with the setkey() function as it
gets called asynchronous to the crypto engine queue. Modifying the same
cmdbuf in setkey() will corrupt the ongoing host1x task and in turn
break the encryption/decryption operation. Hence use a separate cmdbuf
for setkey().
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While MXS_DCP_CONTROL0_OTP_KEY is set, the CRYPTO_KEY (DCP_PAES_KEY_OTP)
is used even if the UNIQUE_KEY (DCP_PAES_KEY_UNIQUE) is selected. This
is not clearly documented, but this implementation is consistent with
NXP's downstream kernel fork and optee_os.
Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
otx_cpt_eng_grp_has_eng_type() was added in 2020 by
commit d9110b0b01 ("crypto: marvell - add support for OCTEON TX CPT
engine")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
otx2_cpt_print_uc_dbg_info() has been unused since 2023's
commit 82f89f1aa6 ("crypto: octeontx2 - add devlink option to set t106
mode")
Remove it and the get_engs_info() helper it's the only user of.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace calls to the deprecated function scatterwalk_copychunks() with
memcpy_from_scatterwalk(), memcpy_to_scatterwalk(), scatterwalk_skip(),
or scatterwalk_start_at_pos() as appropriate.
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Maxime Méré <maxime.mere@foss.st.com>
Cc: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
s5p_sg_copy_buf() open-coded a copy from/to a scatterlist using
scatterwalk_* functions that are planned for removal. Replace it with
the new functions memcpy_from_sglist() and memcpy_to_sglist() instead.
Also take the opportunity to replace calls to scatterwalk_map_and_copy()
in the same file; this eliminates the confusing 'out' argument.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- In nx_walk_and_build(), use scatterwalk_start_at_pos() instead of a
more complex way to achieve the same result.
- Also in nx_walk_and_build(), use the new functions scatterwalk_next()
which consolidates scatterwalk_clamp() and scatterwalk_map(), and use
scatterwalk_done_src() which consolidates scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done(). Remove unnecessary
code that seemed to be intended to advance to the next sg entry, which
is already handled by the scatterwalk functions.
Note that nx_walk_and_build() does not actually read or write the
mapped virtual address, and thus it is misusing the scatter_walk API.
It really should just access the scatterlist directly. This patch
does not try to address this existing issue.
- In nx_gca(), use memcpy_from_sglist() instead of a more complex way to
achieve the same result.
- In various functions, replace calls to scatterwalk_map_and_copy() with
memcpy_from_sglist() or memcpy_to_sglist() as appropriate. Note that
this eliminates the confusing 'out' argument (which this driver had
tried to work around by defining the missing constants for it...)
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix smatch warning for sg_nents_for_len return value in Inside Secure
EIP93 driver.
The return value of sg_nents_for_len was assigned to an u32 and the
error was ignored and converted to a positive integer.
Rework the code to correctly handle the error from sg_nents_for_len to
mute smatch warning.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The service parsing logic is used to parse the configuration string
provided by the user using the attribute qat/cfg_services in sysfs.
The logic relies on hard-coded strings. For example, the service
"sym;asym" is also replicated as "asym;sym".
This makes the addition of new services or service combinations
complex as it requires the addition of new hard-coded strings for all
possible combinations.
This commit addresses this issue by:
* reducing the number of internal service strings to only the basic
service representations.
* modifying the service parsing logic to analyze the service string
token by token instead of comparing a whole string with patterns.
* introducing the concept of a service mask where each service is
represented by a single bit.
* dividing the parsing logic into several functions to allow for code
reuse (e.g. by sysfs-related functions).
* introducing a new, device generation-specific function to verify
whether the requested service combination is supported by the
currently used device.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The symbol `adf_cfg_services` is only used on the intel_qat module.
There is no need to export it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The objects in the qat_common Makefile are currently listed in a random
order.
Reorder the objects alphabetically to make it easier to find where to
add a new object.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Align with kbuild documentation by using <module_name>-y instead of
<module_name>-objs, following the kernel convention for building modules
from multiple object files.
Link: https://docs.kernel.org/kbuild/makefiles.html#loadable-module-goals-obj-m
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use kmalloc_array() instead of kcalloc() because sg_init_table() already
sets the memory to zero. This avoids zeroing the memory twice.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of having two entries for inside-secure in the top-level
Makefile, make it just a single one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PCI device 0x1134 shares same register features as PCI device 0x17E0.
Hence reuse same data for the new PCI device ID 0x1134.
Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During encryption and decryption, user requests
must be checked first, if the specifications that
are not supported by the hardware are used, the
software computing is used for processing.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware only supports authentication sizes
that are 4-byte aligned. Therefore, the driver
switches to software computation in this case.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the HMAC RFC, the authentication key
can be 0 bytes, and the hardware can handle this
scenario. Therefore, remove the incorrect validation
for this case.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request context virtio_crypto_{akcipher,sym}_request contains a
pointer to the [as]kcipher_request itself.
The pointer is superfluous as it can be calculated with container_of().
Drop the superfluous pointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request context virtio_crypto_{akcipher,sym}_request contains a
pointer to the transform context virtio_crypto_[as]kcipher_ctx.
The pointer is superfluous as it can be calculated with the cheap
crypto_akcipher_reqtfm() + akcipher_tfm_ctx() and
crypto_skcipher_reqtfm() + crypto_skcipher_ctx() combos.
Drop the superfluous pointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct virtio_crypto_[as]kcipher_ctx contains a backpointer to struct
crypto_[as]kcipher which is superfluous in two ways:
First, it's not used anywhere. Second, the context is embedded into
struct crypto_tfm, so one could just use container_of() to get from the
context to crypto_tfm and from there to crypto_[as]kcipher.
Drop the superfluous backpointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When setting a public or private RSA key, the integer n is cached in the
transform context virtio_crypto_akcipher_ctx -- with the sole purpose of
calculating the key size from it in virtio_crypto_rsa_max_size().
It looks like this was copy-pasted from crypto/rsa.c.
Cache the key size directly instead of the integer n, thus simplifying
the code and reducing the memory footprint.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It seems the kernel-doc of virtcrypto_dev_start() was copied verbatim to
virtcrypto_dev_stop(). Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The XP10 algorithm is not supported by any QAT device.
Remove the definition of bit 7 (ICP_QAT_FW_COMP_20_CMD_XP10_COMPRESS)
and bit 8 (ICP_QAT_FW_COMP_20_CMD_XP10_DECOMPRESS) in the firmware
command id enum and rename them as reserved.
Those bits shall not be used in future.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Only the ECDH with NIST P-256 meets requirements.
The algorithm will be scheduled first for high-performance cores.
The key step is to config resv1 field of BD.
Signed-off-by: lizhi <lizhi206@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.
Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.
Fixes: 2a6170dfe7 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Inside Secure SafeXcel EIP-93 Crypto Engine used on
Mediatek MT7621 SoC and new Airoha SoC.
EIP-93 IP supports AES/DES/3DES ciphers in ECB/CBC and CTR modes as well as
authenc(HMAC(x), cipher(y)) using HMAC MD5, SHA1, SHA224 and SHA256.
EIP-93 provide regs to signal support for specific chipers and the
driver dynamically register only the supported one by the chip.
Signed-off-by: Richard van Schagen <vschagen@icloud.com>
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le(). Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.
Therefore, let's standardize on just crc32c(). Remove the other two
names, and update callers accordingly.
Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).
Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
The omap driver was using struct scatter_walk, but only to maintain an
offset, rather than iterating through the virtual addresses of the data
contained in the scatterlist which is what scatter_walk is intended for.
Make it just use a plain offset instead. This is simpler and avoids
using struct scatter_walk in a way that is not well supported.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
spum_cipher_req_init() assigns 'spu_hdr' to local 'ptr' variable and
later increments 'ptr' over specific fields like it was meant to point
to pieces of message for some purpose. However the code does not read
'ptr' at all thus this entire iteration over 'spu_hdr' seams pointless.
Reported by clang W=1 build:
drivers/crypto/bcm/spu.c:839:6: error: variable 'ptr' set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On the HiSilicon accelerators drivers, the PF/VFs driver can send messages
to the VFs/PF by writing hardware registers, and the VFs/PF driver receives
messages from the PF/VFs by reading hardware registers. To support this
feature, a new version id is added, different communication mechanism are
used based on different version id.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the latest mm-unstable, setting the iaa_crypto sync_mode to 'async'
causes crypto testmgr.c test_acomp() failure and dmesg call traces, and
zswap being unable to use 'deflate-iaa' as a compressor:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
[ 255.271030] zswap: compressor deflate-iaa not available
[ 369.960673] INFO: task cryptomgr_test:4889 blocked for more than 122 seconds.
[ 369.970127] Not tainted 6.13.0-rc1-mm-unstable-12-16-2024+ #324
[ 369.977411] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 369.986246] task:cryptomgr_test state:D stack:0 pid:4889 tgid:4889 ppid:2 flags:0x00004000
[ 369.986253] Call Trace:
[ 369.986256] <TASK>
[ 369.986260] __schedule+0x45c/0xfa0
[ 369.986273] schedule+0x2e/0xb0
[ 369.986277] schedule_timeout+0xe7/0x100
[ 369.986284] ? __prepare_to_swait+0x4e/0x70
[ 369.986290] wait_for_completion+0x8d/0x120
[ 369.986293] test_acomp+0x284/0x670
[ 369.986305] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986312] alg_test_comp+0x263/0x440
[ 369.986315] ? sched_balance_newidle+0x259/0x430
[ 369.986320] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986323] alg_test.part.27+0x103/0x410
[ 369.986326] ? __schedule+0x464/0xfa0
[ 369.986330] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986333] cryptomgr_test+0x20/0x40
[ 369.986336] kthread+0xda/0x110
[ 369.986344] ? __pfx_kthread+0x10/0x10
[ 369.986346] ret_from_fork+0x2d/0x40
[ 369.986355] ? __pfx_kthread+0x10/0x10
[ 369.986358] ret_from_fork_asm+0x1a/0x30
[ 369.986365] </TASK>
This happens because the only async polling without interrupts that
iaa_crypto currently implements is with the 'sync' mode. With 'async',
iaa_crypto calls to compress/decompress submit the descriptor and return
-EINPROGRESS, without any mechanism in the driver to poll for
completions. Hence callers such as test_acomp() in crypto/testmgr.c or
zswap, that wrap the calls to crypto_acomp_compress() and
crypto_acomp_decompress() in synchronous wrappers, will block
indefinitely. Even before zswap can notice this problem, the crypto
testmgr.c's test_acomp() will fail and prevent registration of
"deflate-iaa" as a valid crypto acomp algorithm, thereby disallowing the
use of "deflate-iaa" as a zswap compress (zswap will fall-back to the
default compressor in this case).
To fix this issue, this patch modifies the iaa_crypto sync_mode set
function to treat 'async' equivalent to 'sync', so that the correct and
only supported driver async polling without interrupts implementation is
enabled, and zswap can use 'deflate-iaa' as the compressor.
Hence, with this patch, this is what will happen:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
cat /sys/bus/dsa/drivers/crypto/sync_mode
sync
There are no crypto/testmgr.c test_acomp() errors, no call traces and zswap
can use 'deflate-iaa' without any errors. The iaa_crypto documentation has
also been updated to mention this caveat with 'async' and what to expect
with this fix.
True iaa_crypto async polling without interrupts is enabled in patch
"crypto: iaa - Implement batch_compress(), batch_decompress() API in
iaa_crypto." [1] which is under review as part of the "zswap IAA compress
batching" patch-series [2]. Until this is merged, we would appreciate it if
this current patch can be considered for a hotfix.
[1]: https://patchwork.kernel.org/project/linux-mm/patch/20241221063119.29140-5-kanchana.p.sridhar@intel.com/
[2]: https://patchwork.kernel.org/project/linux-mm/list/?series=920084
Fixes: 09646c98d ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit ce8fd0500b ("crypto: qce - use __free() for a buffer that's
always freed") introduced a buggy use of __free(), which clang
rightfully points out:
drivers/crypto/qce/sha.c:365:3: error: cannot jump from this goto statement to its label
365 | goto err_free_ahash;
| ^
drivers/crypto/qce/sha.c:373:6: note: jump bypasses initialization of variable with __attribute__((cleanup))
373 | u8 *buf __free(kfree) = kzalloc(keylen + QCE_MAX_ALIGN_SIZE,
| ^
Jumping over a variable declared with the cleanup attribute does not
prevent the cleanup function from running; instead, the cleanup function
is called with an uninitialized value.
Moving the declaration back to the top function with __free() and a NULL
initialization would resolve the bug but that is really not much
different from the original code. Since the function is so simple and
there is no functional reason to use __free() here, just revert the
original change to resolve the issue.
Fixes: ce8fd0500b ("crypto: qce - use __free() for a buffer that's always freed")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYtpAwXa5mUQ5O7vDLK2xN4t-kJoxgUe1ZFRT=AGqmLSRA@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
init_ixp_crypto() calls of_parse_phandle_with_fixed_args() multiple
times, but does not release all the obtained refcounts. Fix it by adding
of_node_put() calls.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 76f24b4f46 ("crypto: ixp4xx - Add device tree support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the digest alg is HMAC-SHAx or another, the authsize may be less
than 4 bytes and mac_len of the BD is set to zero, the hardware considers
it a BD configuration error and reports a ras error, so the sec driver
needs to switch to software calculation in this case, this patch add a
check for it and remove unnecessary check that has been done by crypto.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the AEAD algorithm is used for encryption or decryption,
the input authentication length varies, the hardware needs to
obtain the input length to pass the integrity check verification.
Currently, the driver uses a fixed authentication length,which
causes decryption failure, so the length configuration is modified.
In addition, the step of setting the auth length is unnecessary,
so it was deleted from the setkey function.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the driver for the Stream Processing Unit (SPU) on the Niagara 2.
Removing this driver allows removing the support for physical address
walks in skcipher_walk. That is a misfeature that is used only by this
driver and increases the overhead of the crypto API for everyone else.
There is little evidence that anyone cares about this driver. The
Niagara 2, a.k.a. the UltraSPARC T2, is a server CPU released in
2007. The SPU is also present on the SPARC T3, released in 2010.
However, the SPU went away in SPARC T4, released in 2012, which replaced
it with proper cryptographic instructions instead. These newer
instructions are supported by the kernel in arch/sparc/crypto/.
This driver was completely broken from (at least) 2015 to 2022, from
commit 8996eafdcb ("crypto: ahash - ensure statesize is non-zero") to
commit 76a4e87459 ("crypto: n2 - add missing hash statesize"), since
its probe function always returned an error before registering any
algorithms. Though, even with that obvious issue fixed, it is unclear
whether the driver now works correctly. E.g., there are no indications
that anyone has run the self-tests recently.
One bug report for this driver in 2017
(https://lore.kernel.org/r/nycvar.YFH.7.76.1712110214220.28416@n3.vanv.qr)
complained that it crashed the kernel while being loaded. The reporter
didn't seem to care about the functionality of the driver, but rather
just the fact that loading it crashed the kernel. In fact not until
2022 was the driver fixed to maybe actually register its algorithms with
the crypto API. The 2022 fix does have a Reported-by and Tested-by, but
that may similarly have been just about making the error messages go
away as opposed to someone actually wanting to use the driver.
As such, it seems appropriate to retire this driver in mainline.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As QCE is an order of magnitude slower than the ARMv8 Crypto Extensions
on the CPU, and is also less well tested, give it a lower priority.
Previously the QCE SHA algorithms had higher priority than the ARMv8 CE
equivalents, and the ciphers such as AES-XTS had the same priority which
meant the QCE versions were chosen if they happened to be loaded later.
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Cc: stable@vger.kernel.org
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use a scoped guard to simplify the cleanup handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Having switched to workqueue from tasklet, we are no longer limited to
atomic APIs and can now convert the spinlock to a mutex. This, along
with the conversion from tasklet to workqueue grants us ~15% improvement
in cryptsetup benchmarks for AES encryption.
While at it: use guards to simplify locking code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's nothing about the qce driver that requires running from a
tasklet. Switch to using the system workqueue.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buffer allocated in qce_ahash_hmac_setkey is always freed before
returning to use __free() to automate it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make qce_register_algs() a managed interface. This allows us to further
simplify the remove() callback.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make qce_dma_request() into a managed interface. With this we can
simplify the error path in probe() and drop another operations from
remove().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_optional_enabled() to avoid having to enable the clocks
separately as well as putting the clocks in error path and the remove()
callback.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no need to call icc_set_bw(qce->mem_path, 0, 0); in error path
as this will already be done in the release path of devm_of_icc_get().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we encounter an error when registering alorithms with the crypto
framework, we just bail out and don't unregister the ones we
successfully registered in prior iterations of the loop.
Add code that goes back over the algos and unregisters them before
returning an error from qce_register_algs().
Cc: stable@vger.kernel.org
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If qce_check_version() fails, we should jump to err_dma as we already
called qce_dma_request() a couple lines before.
Cc: stable@vger.kernel.org
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On iMX8DXL/QM/QXP(SECO) & iMX8ULP(ELE) SoCs, access to controller
region(CAAM page 0) is not permitted from non secure world.
use JobR's register space to access page 0 registers.
Fixes: 6a83830f64 ("crypto: caam - warn if blob_gen key is insecure")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The error detection of the data aggregation feature is separated from
the compression/decompression feature. This patch enables the error
detection and reporting of the data aggregation feature. When an
unrecoverable error occurs in the algorithm core, the device reports
the error to the driver, and the driver will reset the device.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zip device adds data aggregation feature, data with the
same key can be combined.
This patch enables the device data aggregation feature.
New feature is called "hashagg" name and registered to
the uacce subsystem to allow applications to submit data
aggregation operations in user space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tegra_cmac_init or tegra_sha_init function may return an error when
memory is exhausted. It should not transfer the request when they return
an error.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offset based on (id * size) is wrong for sqc and cqc.
(*sqc/*cqc + 1) can already offset sizeof(struct(Xqc)) length.
Fixes: 15f112f9ce ("crypto: hisilicon/debugfs - mask the unnecessary info from the dump")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and fix a memory leak while at it. The new creds are created via
prepare_creds() and then reverted via put_cred(revert_creds()). The
additional reference count bump from override_creds() wasn't even taken
into account before.
Link: https://lore.kernel.org/r/20241125-work-cred-v2-8-68b9d38bb5b2@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert all calls to revert_creds() over to explicitly dropping
reference counts in preparation for converting revert_creds() to
revert_creds_light() semantics.
Link: https://lore.kernel.org/r/20241125-work-cred-v2-3-68b9d38bb5b2@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert all callers from override_creds() to
override_creds_light(get_new_cred()) in preparation of making
override_creds() not take a separate reference at all.
Link: https://lore.kernel.org/r/20241125-work-cred-v2-1-68b9d38bb5b2@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
API:
- Add sig driver API.
- Remove signing/verification from akcipher API.
- Move crypto_simd_disabled_for_test to lib/crypto.
- Add WARN_ON for return values from driver that indicates memory corruption.
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API.
- Optimise crc32c code size on x86.
- Optimise crct10dif on arm/arm64.
- Optimise p10-aes-gcm on powerpc.
- Optimise aegis128 on x86.
- Output full sample from test interface in jitter RNG.
- Retry without padata when it fails in pcrypt.
Drivers:
- Add support for Airoha EN7581 TRNG.
- Add support for STM32MP25x platforms in stm32.
- Enable iproc-r200 RNG driver on BCMBCA.
- Add Broadcom BCM74110 RNG driver.
-----BEGIN PGP SIGNATURE-----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=T8pa
-----END PGP SIGNATURE-----
Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
- Add firmware sysfs interface which allows user space to retrieve the dump
area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the complete
associated Channel-Measurements Characteristics Block available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to KVM
code. This is the first step to make s390 KVM page fault handling similar
to other architectures. With this first step the main fault handler does
not have any special handling anymore, and therefore convert it to
support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations
- Provide a cmpxchg inline assembly which makes use of this, and provide
all variants of arch_try_cmpxchg() so that the compiler can generate
slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros), and
convert all inline assemblies to make use of them, so that depending on
compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the Query
Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so that
the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID per
port. Additionally improve the overall robustness and usability of
the multifunction support
- Various other small improvements, fixes, and cleanups
-----BEGIN PGP SIGNATURE-----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=v+um
-----END PGP SIGNATURE-----
Merge tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add firmware sysfs interface which allows user space to retrieve the
dump area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the
complete associated Channel-Measurements Characteristics Block
available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to
KVM code. This is the first step to make s390 KVM page fault handling
similar to other architectures. With this first step the main fault
handler does not have any special handling anymore, and therefore
convert it to support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations:
- Provide a cmpxchg inline assembly which makes use of this, and
provide all variants of arch_try_cmpxchg() so that the compiler
can generate slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros),
and convert all inline assemblies to make use of them, so that
depending on compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the
Query Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so
that the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID
per port. Additionally improve the overall robustness and usability
of the multifunction support
- Various other small improvements, fixes, and cleanups
* tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits)
s390/cio/ioasm: Convert to use flag output macros
s390/cio/qdio: Convert to use flag output macros
s390/sclp: Convert to use flag output macros
s390/dasd: Convert to use flag output macros
s390/boot/physmem: Convert to use flag output macros
s390/pci: Convert to use flag output macros
s390/kvm: Convert to use flag output macros
s390/extmem: Convert to use flag output macros
s390/string: Convert to use flag output macros
s390/diag: Convert to use flag output macros
s390/irq: Convert to use flag output macros
s390/smp: Convert to use flag output macros
s390/uv: Convert to use flag output macros
s390/pai: Convert to use flag output macros
s390/mm: Convert to use flag output macros
s390/cpu_mf: Convert to use flag output macros
s390/cpcmd: Convert to use flag output macros
s390/topology: Convert to use flag output macros
s390/time: Convert to use flag output macros
s390/pageattr: Convert to use flag output macros
...
In cesa/cipher.c most declarations of struct mv_cesa_op_ctx are uninitialized.
This causes one of the values in the struct to be left unitialized in later
usages.
This patch fixes it by adding initializations in the same way it is done in
cesa/hash.c.
Fixes errors discovered in coverity: 1600942, 1600939, 1600935, 1600934, 1600929, 1600927,
1600925, 1600921, 1600920, 1600919, 1600915, 1600914
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If do_cpt_init() fails, a previous dma_alloc_coherent() call needs to be
undone.
Add the needed dma_free_coherent() before returning.
Fixes: 9e2c7d9994 ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error.
Fixes: 9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The caam_rsa_set_priv_key_form did not check for memory allocation errors.
Add the checks to the caam_rsa_set_priv_key_form functions.
Fixes: 52e26d77b8 ("crypto: caam - add support for RSA key form 2")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit 320406cb60 ("crypto: inside-secure - Replace generic aes
with libaes") replaced crypto_alloc_cipher() with kmalloc(), but did not
modify the handling of the return value. When kmalloc() returns NULL,
PTR_ERR_OR_ZERO(NULL) returns 0, but in fact, the memory allocation has
failed, and -ENOMEM should be returned.
Fixes: 320406cb60 ("crypto: inside-secure - Replace generic aes with libaes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The adf_init_aer() won't destroy device_reset_wq when alloc_workqueue()
for device_sriov_wq failed. Add destroy_workqueue for device_reset_wq to
fix this issue.
Fixes: 4469f9b234 ("crypto: qat - re-enable sriov after pf reset")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b1 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Query the capability register status of accelerator devices
(SEC, HPRE and ZIP) through the debugfs interface, for example:
cat cap_regs. The purpose is to improve the robustness and
locability of hardware devices and drivers.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-5-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Bharat Bhushan <bbhushan2@marvell.com>
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
This new pkey handler module supports the conversion of
Ultravisor retrievable secrets to protected keys.
The new module pkey-uv.ko is able to retrieve and verify
protected keys backed up by the Ultravisor layer which is
only available within protected execution environment.
The module is only automatically loaded if there is the
UV CPU feature flagged as available. Additionally on module
init there is a check for protected execution environment
and for UV supporting retrievable secrets. Also if the kernel
is not running as a protected execution guest, the module
unloads itself with errno ENODEV.
The pkey UV module currently supports these Ultravisor
secrets and is able to retrieve a protected key for these
UV secret types:
- UV_SECRET_AES_128
- UV_SECRET_AES_192
- UV_SECRET_AES_256
- UV_SECRET_AES_XTS_128
- UV_SECRET_AES_XTS_256
- UV_SECRET_HMAC_SHA_256
- UV_SECRET_HMAC_SHA_512
- UV_SECRET_ECDSA_P256
- UV_SECRET_ECDSA_P384
- UV_SECRET_ECDSA_P521
- UV_SECRET_ECDSA_ED25519
- UV_SECRET_ECDSA_ED448
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The explicit crypto_engine_stop() call is not needed, as it is already
called internally by crypto_engine_exit().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The explicit crypto_engine_stop() call is not needed, as it is already
called internally by crypto_engine_exit().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The while loop breaks in the first run because of incorrect
if condition. It also causes the statements after the if to
appear dead.
Fix this by changing the condition from if(timeout--) to
if(!timeout--).
This bug was reported by Coverity Scan.
Report:
CID 1600859: (#1 of 1): Logically dead code (DEADCODE)
dead_error_line: Execution cannot reach this statement: udelay(30UL);
Fixes: 9e2c7d9994 ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake of 'accelaration' in comments which
should be 'acceleration'.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently there is an unnecessary error check on ret without a proceeding
assignment to ret that needs checking. The check is redundant and can be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename devdata_mutex to devdata_spinlock to accurately reflect its
implementation as a spinlock.
[1] v1 https://lore.kernel.org/all/ZwyqD-w5hEhrnqTB@linux.ibm.com
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'struct pm_status_row' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security.
Update the prototype of some functions accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4400 1059 0 5459 1553 drivers/crypto/intel/qat/qat_common/adf_gen4_pm_debugfs.o
After:
=====
text data bss dec hex filename
5216 243 0 5459 1553 drivers/crypto/intel/qat/qat_common/adf_gen4_pm_debugfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allows removing some gotos and simplifying remove a bit.
Tested Cisco MX60W.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no use for the resource struct. Just use
devm_platform_ioremap_resource to simplify the code.
Avoids the need to iounmap manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Removes separate steps. Requires index instead of name.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is unnecessary as the irqs are devm managed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoids manual frees. Also simplifiies the code with _optional
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/crypto to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Resetting the service arbiter config can cause potential issues
related to response ordering and ring flow control check in the
event of AER or device hang. This is because it results in changing
the default response ring size from 32 bytes to 16 bytes. The service
arbiter config reset also disables response ring flow control check.
Thus, by removing this reset we can prevent the service arbiter from
being configured inappropriately, which leads to undesired device
behaviour in the event of errors.
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure that the inline function contains no more than 10 lines.
move q_num_set() from hisi_acc_qm.h to qm.c.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
adf_devmgr_get_first has been unused since commit
4a4b0bad06 ("crypto: qat - fix crypto_get_instance_node function")
Remove it.
(Build tested only, I don't own the hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fw_objs[] array has "num_objs" elements so the > needs to be >= to
prevent an out of bounds read.
Fixes: 10484c647a ("crypto: qat - refactor fw config logic for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is called from uof_get_name_420xx() where "num_objs" is the
ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of
bounds access.
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For iaa_crypto operations, it's assumed that if an operation doesn't
make progress, the IAA watchdog timer will kick in and set the
completion status bit to failure and the reason to completion timeout.
Some systems may have broken hardware that doesn't even do that, which
can result in an infinite status-checking loop. Add a check for that
in the loop, and disable the driver if it occurs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs functions are guaranteed to return a valid error code
instead of NULL upon failure. Consequently, the driver can directly
propagate any error returned without additional checks.
Remove the unnecessary `if` statement after debugfs_create_dir(). If
this function fails, the error code is stored in accel_dev->debugfs_dir
and utilized in subsequent debugfs calls.
Additionally, since accel_dev->debugfs_dir is assured to be non-NULL,
remove the superfluous NULL pointer checks within the adf_dbgfs_add()
and adf_dbgfs_rm().
Fixes: 9260db6640 ("crypto: qat - move dbgfs init to separate file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'ctrldev' and 'qidev' are the same.
Remove the former to slightly simplify the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type of the last parameter given to devm_add_action_or_reset() is
"struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to
"struct device *".
Pass the correct parameter to devm_add_action_or_reset() so that the
resources are released as expected.
Fixes: f414de2e2f ("crypto: caam - use devres to de-initialize QI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the driver enables clock gating for only one cluster.
However, the new hardware has three clusters. Therefore, clock
gating needs to be enabled based on the number of clusters on the
current hardware.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix passing an initialization vector in the payload field which
is necessary for AES in CBC mode even with hardware-bound keys.
Fixes: 3d16af0b4c ("crypto: mxs-dcp: Add support for hardware-bound keys")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function meson_crypto_probe, devm_platform_ioremap_resource()
have already contains error message, so remove the
redundant assignment and error messages.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The drivers aspeed-acry.c, hpre_crypto.c and jh7110-rsa.c purport to
implement sign/verify operations for raw (unpadded) "rsa".
But there is no such thing as message digests generally need to be
padded according to a predefined scheme (such as PSS or PKCS#1) to
match the size of the usually much larger RSA keys.
The bogus sign/verify operations defined by these drivers are never
called but block removal of sign/verify from akcipher_alg. Drop them.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The virtio crypto driver exposes akcipher sign/verify operations in a
user space ABI. This blocks removal of sign/verify from akcipher_alg.
Herbert opines:
"I would say that this is something that we can break. Breaking it
is no different to running virtio on a host that does not support
these algorithms. After all, a software implementation must always
be present.
I deliberately left akcipher out of crypto_user because the API
is still in flux. We should not let virtio constrain ourselves."
https://lore.kernel.org/all/ZtqoNAgcnXnrYhZZ@gondor.apana.org.au/
"I would remove virtio akcipher support in its entirety. This API
was never meant to be exposed outside of the kernel."
https://lore.kernel.org/all/Ztqql_gqgZiMW8zz@gondor.apana.org.au/
Drop sign/verify support from virtio crypto. There's no strong reason
to also remove encrypt/decrypt support, so keep it.
A key selling point of virtio crypto is to allow guest access to crypto
accelerators on the host. So far the only akcipher algorithm supported
by virtio crypto is RSA. Dropping sign/verify merely means that the
PKCS#1 padding is now always generated or verified inside the guest,
but the actual signature generation/verification (which is an RSA
decrypt/encrypt operation) may still use an accelerator on the host.
Generating or verifying the PKCS#1 padding is cheap, so a hardware
accelerator won't be of much help there. Which begs the question
whether virtio crypto support for sign/verify makes sense at all.
It would make sense for the sign operation if the host has a security
chip to store asymmetric private keys. But the kernel doesn't even
have an asymmetric_key_subtype yet for hardware-based private keys.
There's at least one rudimentary driver for such chips (atmel-ecc.c for
ATECC508A), but it doesn't implement the sign operation. The kernel
would first have to grow support for a hardware asymmetric_key_subtype
and at least one driver implementing the sign operation before exposure
to guests via virtio makes sense.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
