For Kunpeng930, if qm clock-gating is enabled, rate limiter
will be inaccurate. Therefore, disable clock-gating before doing task.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable deflate/lz77_zstd algorithm for uacce device on Kunpeng930.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the hardware reports the 'CQ' overflow or 'CQE' error by the abnormal
interrupt, disable the queue and stop tasks send to hardware.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the hardware reports the event queue overflow by the abnormal interrupt,
the driver needs to reset the function and re-enable the event queue
interrupt and abnormal interrupt.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The abnormal interrupt method needs to be changed, and the changed method
needs to be locked in order to maintain atomicity. Therefore,
replace request_irq() with request_threaded_irq().
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After processing an interrupt event and the interrupt function is
enabled by writing the QM_DOORBELL_CMD_AEQ register, the hardware
may generate new interrupt events due to processing other user's task
when the subsequent interrupt events have not been processed. The new
interrupt event will disrupt the current normal processing flow and
cause other problems.
Therefore, the operation of writing the QM_DOORBELL_CMD_AEQ doorbell
register needs to be placed after all interrupt events processing
are completed.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch does not change any code, just code movement. Preparing for
next patch.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The internal memory of the device needs to be reset only when
the device is globally initialized. Other scenarios, such as
function reset, do not need to perform reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When remove the driver and executing the task occur at the same time,
the following deadlock will be triggered:
Chain exists of:
sva_lock --> uacce_mutex --> &qm->qps_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&qm->qps_lock);
lock(uacce_mutex);
lock(&qm->qps_lock);
lock(sva_lock);
And the lock 'qps_lock' is used to protect qp. Therefore, it's reasonable
cycle is to continue until the qp memory is released. So move the release
lock infront of 'uacce_remove'.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For Kunpeng 920, the bit 0 of register 'HZIP_SGL_RUSER_32_63' stand for
whether the ssid is valid. So this bit should be set as valid for sva mode.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hpre_curve25519_src_init() allocates memory for 'ptr' before calling
memcmp(). If memcmp() returns 0, the function will return '-EINVAL'
without freeing memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When hisi_qm_resume() returns 0, it indicates that the device has started
successfully. If the device fails to start, hisi_qm_resume() needs to
return the actual error code to the caller instead of 0.
Fixes: d7ea53395b ("crypto: hisilicon - add runtime PM ops")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some optimize for the calculation of qos shaper parameters.
and modify the comments.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Optimize overly long functions.
2. Fix the format symbol does not match the actual type.
3. Use the PCI_DEVFN to get the function id.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of qos should be reset after flr resetting or device
resetting. So set the max of qos value for every function. Then
update the value of qos when user writing the alg_qos.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device. This is a step toward removing pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
As qm should register to uacce in UACCE_DEV_SVA mode,
this patch modifies to checks uacce mode before doing uacce
registration.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate an extra memory page for qp in the qp memory initialization.
Set a qp error flag in the extra page addr when device resetting.
This error flag can be seen in the userspace. This flag can helps
users to stop tasks when device resetting. After resetting, this error
flag will be reset when this qp is created again. So app should release
the old qp and request a new one, and do the task on the new queue
again.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate an extra memory page for qp. This extra page is
used to set the device or qp status. But this page not
be used currently. Meanwhile it leads to dus size not equal
to mmap size as using uacce sva mode, and cause the app task
broken.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function qm_qos_value_init expects an unsigned integer but
is incorrectly supplying a signed format to sscanf. This patch
fixes it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To support runtime PM, use the function 'pci_set_power_state' to change
the power state. Therefore, method _PS0 or _PR0 needs to be filled by
platform. So check whether the method is supported, if not, print a
prompt information.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of
debugfs function directly use 'qm' instead of 'filp'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Accelerator devices support runtime PM to reduce power consumption.
This patch adds the runtime PM suspend/resume callbacks to the
accelerator devices.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator devices support runtime PM, when device is in suspended, an
exception will occur if reading registers. Therefore, this patch uses
'debugfs_create_file' instead of 'debugfs_create_regset32' to create
debugfs file, and then the driver can get the device status before
reading the register.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the endian configuration of the hardware is abnormal, it will
cause the SEC engine is faulty that reports empty message. And it
will affect the normal function of the hardware. Currently the soft
configuration method can't restore the faulty device. The endian
needs to be configured according to the system properties. So fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Because the algs registration process has added a judgment.
So need to add the judgment for the abnormal exiting process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hpre device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables hpre dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 sec device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables sec dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 zip device supports dynamic clock gating. When executing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables zip dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The open interface of the sva prefetching function is distinguish the chip
version. But the close interface of the sva prefetching function doesn't
distinguish the chip version. As a result, the sva prefetching close
operation is also performed on Kunpeng920, those registers are important
on Kunpeng920, which eventually leads to abnormal hardware problems. So
need to fix it immediately.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a function hisi_qm_is_q_updated to
check if the task is ready in hardware queue when
user polls an UACCE queue.This prevents users from
repeatedly querying whether the accelerator has
completed tasks, which wastes CPU resources.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ZIP driver support configure each function's QoS in the Host
for Kunpeng930. The ZIP driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HPRE driver support configure each function's QoS in the Host
for Kunpeng930. The HPRE driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEC driver support configure each function's QoS in the Host
for Kunpeng930. The SEC driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. The ACC driver supports to inquiry each function's QoS in the Host
and VM. The driver supports reading QoS by the device debug SysFS
attribute file "alg_qos", like "cat alg_qos".
2. Modify the communication process between pf and vf as needed.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the function communication, add pf ping single
vf function to be used in the vf read QoS.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merges the work initialization process into a single function from
qm initialization.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Just move the code as needed.
2. Add the "alg_qos" file node in the qm debug sysfs.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on the Token bucket algorithm. The HAC driver supports to configure
each function's QoS in the host. The driver supports writing QoS by the
debugfs node that named "alg_qos". The qos value is 1~1000.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the SEC request structure, combines two common parameters of the
SEC request into one parameter.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use hardware integrity check value process instead of soft verify
process when doing aead decryption.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add fallback tfm supporting for hisi_sec driver. Due to the Kunpeng920's
CCM/GCM algorithm not supports 0 byte src length. So the driver needs to
setting the soft fallback aead tfm.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new algorithm mode for AEAD:
CCM(AES), GCM(AES), CCM(SM4), GCM(SM4).
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the reset flow based on PF/VF communications. VFs
will be stopped after receiving reset message from PF, and wait for
reset finish to restart VFs.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds 'ping_all_vfs' callback that supports pf send message to
all vfs and 'ping_pf' callback that supports vf send message to pf. After
receiving the interrupt, the communication destination gets the message
by sending mailbox.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports the communication between PF and VFs.
This patch enables communication between PF and VFs by writing hardware
registers, and requests an irq for communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports PF/VF communications. When the device is
reset, PF can send message to VF to stop function and restart function.
This patch adjusts the reset interface to support sending message through
PF/VF communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The result of gx modulo p is zero if gx is equal to p, so return
error immediately if gx is equal to p.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the key length is zero, use stdrng to generate private key
to pass the crypto ecdh-nist-p256 self test on vector 2.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixup the 3des algorithm minimum key size declaration.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add fallback tfm supporting for hisi_sec driver. Due to the hardware
not supports 192bit key length when using XTS mode. So the driver needs
to setting the soft fallback skcipher tfm for user.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new skcipher algorithms for Kunpeng930 SEC:
OFB(AES), CFB(AES), CTR(AES),
OFB(SM4), CFB(SM4), CTR(SM4).
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to Kunpeng930 adds new SQE data structure, the SEC driver needs
to be upgraded. It mainly includes bd parsing process and bd filling
process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new type of sqe for Kunpeng930, which is the next generation
of SEC accelerator hardware. The hardware adds a new SQE data
structure.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memdup_user_nul() helper instead of open-coding to
simplify the code.
v1-->v2:
fixed patch title error
v2-->v3:
return the actual error
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports address prefetching to improve performance
before doing tasks in SVA scenario.
This patch enables this function in device initialization by writing
hardware registers. In the process of reset, address prefetching is
disabled to avoid the failure of interaction between accelerator device
and SMMU.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compared with Kunpeng920, Kunpeng930 adds MSI configuration steps to wait
for the interrupt to be emptied. In order to be compatible with the
kunpeng920 driver, 'set_msi' callback is added in 'hisi_qm_hw_ops' to
configure hardware register. Call 'set_msi' to disable or enable MSI
during reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If Kunpeng 920 enabled the sva mode, the "qm alg register" process will
return directly. So the list of VF wasn't added to QM list.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add print information necessary if not use hardware crypto algs.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 could be able to close master ooo when NFE occurs, which will
disable memory accessing from device and execute tasks. This ensures that
errors do not spread.
This patch enables the hardware to close master ooo when an error occurs
by writing hardware registers, and ensures that the driver will not drain
qp because the hardware will empty the tasks automatically.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to avoid reporting an exception but the error type is not
configured, the driver needs to configure the error type first, and then
enable the error interrupt. Before executing the task, hardware error
initialization is needed so that the hardware can detect the error in time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before device reset, the driver sets 'QM_RESETTING' flag, but after reset,
the wrong flag is cleared. This patch modifies the problem of inconsistent
flags.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device needs to be initialized first, and then restart the queue to
execute tasks after PF reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 'GENMASK' to generate mask value, just make the code clearer.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove complex macro of 'HPRE_DEV' and replace with the initialized
device pointer.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Functional macro lacks type checking, which is not as strict as function
call checking.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Only init a structure member each line, just to keep the code neat.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macro 'HPRE_ADDR' is unnecessary, so expanding it.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, an invalid dma address may be unmapped when calling
'xx_data_clr_all' in error path, so check dma address of sqe in/out
if initialized before calling 'dma_free_coherent' or 'dma_unmap_single'.
Fixes: a9214b0b6e ("crypto: hisilicon - fix the check on dma address")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently,'cra_driver_name' cannot be used to specify ecdh algorithm
with a special curve, so extending it with curve name.
Fixes: 6763f5ea2d ("crypto: ecdh - move curve_id of ECDH from ...")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QM adds 'qm_mailbox_timeout' and 'qm_flr_timeout' hardware error types on
Kunpeng930. This patch enables the new error types and configures the error
types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 SEC adds several new hardware error types. This patch enables
the new error types and configures the error types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 ZIP adds 'zip_axi_poison_err' 'zip_sva_err' and
'QM_ACC_DO_TASK_TIMEOUT' hardware error types. This patch enables the error
types and configures the error types as NFE.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not
necessary to do it here, so remove it.
It should return error immediately when return value of 'hpre_cfg_by_dsm'
is non-zero, and no need to execute the remaining sentences.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the received sqe is abnormal, the error message in the sqe written
back by the hardware is printed to help to analyze the abnormal causes.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return value of 'le32_to_cpu' is unsigned, so change the
variable type from 'int' to 'unsigned int'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two spaces after return, just keep one.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buffer of the hardware sge needs to be initialized by
soft sgl.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This seems "32" and "31" is obfuscating, It might be better to add a comment,
which explain it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to Documentation/core-api/printk-formats.rst, Use
the correct print format. Printing an unsigned int value should use %u
instead of %d.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports trng and prng, but Kunpeng920 only supports trng.
Therefore, version information is added to ensure that prng is not
registered to Crypto subsystem on Kunpeng920.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 could be able to stop queue by writing hardware registers,
which will trigger tasks in device to be flushed out.
In order to be compatible with the kunpeng920 driver, add 'qm_hw_ops_v3' to
adapt Kunpeng930. And 'stop_qp' callback is added in 'qm_hw_ops_v3' to
write hardware registers. Call 'stop_qp' to drain the tasks in device
before releasing queue.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "qdma" is a structure variable instead of actual data. This
structure doesn't need to be zerod, The memset is useless and redundant.
So delete it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
skcipher: Add a verifying to check whether the triple DES key
is weak.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do a trivial typo fix.
s/discribed/described
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ctx_q_num is a module parameter set by the user to specify the
number of qp queues required to create a ctx.
When the number of qp queues allocated by PF or VF is less than
the ctx_q_num, an error will be reported when ctx is initialized
in kernel mode, which leads to the problem that the registered
algorithms cannot be used.
Therefore, when PF or VF is initialized, if the number of qp queues
is not enough to create a ctx, the kernel mode cannot be used,
and there is no need to register the kernel mode algorithms.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The input data of the ECB (AES) algorithm needs to be aligned
with 16 bytes, and the input data of the XTS (AES) algorithm is
at least 16 bytes. Otherwise the SEC hardware will go wrong.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HPRE can only deal with src_data smaller than 'p' in 'CURVE25519'
algorithm, but 'rfc7748' says:
'Implementations MUST accept non-canonical values and process them as
if they had been reduced modulo the field prime'
So we get its modulus to p, and then deal it with HPRE.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It has newline already by sysfs, so delete redundant '\n'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We must confirm the PASID is disabled before using no-sva mode.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kunpeng930 changes some field meanings in 'sqe'. So add a new
'hisi_zip_sqe_ops' to describe the 'sqe' operations.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The operations about 'sqe' are different on some hardwares. Add a struct
'hisi_zip_sqe_ops' to describe the operations in a hardware. And choose the
'ops' in 'hisi_zip_acomp_init' according to the hardware.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some fields of 'hisi_zip_sqe' are unused, and some fields have misc
utilities. So add comments for used fields and make others unnamed.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes nothing about functions except location in order to make
code logic clearly.
This adjustment follows three principles:
1.The called functions are listed in order above the calling functions.
2.The paired functions are next to each other.
3.Logically similar functions are placed in the same area. Here, we use
the callback of 'acomp_alg' as the basis for dividing areas.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
s/Hisilicon/HiSilicon/g,
according to https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports doorbell isolation to ensure that each queue
has an independent doorbell address space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports queue doorbell isolation.
When doorbell isolation is enabled, it supports to obtain the
maximum number of queues of one function from hardware register.
Otherwise, the 'max_qp_num' is the total number of queues.
When assigning queues to VF, it is necessary to ensure that the number
of VF queues does not exceed 'max_qp_num'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the configuration of the total number of queues 'ctrl_qp_num'
from sec2/hpre/zip to qm.c. And get the total number of queues
from the hardware register for Kunpeng930.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling "hpre_ctx_set" fails, stop and put qp,
otherwise will leak qp resource.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
System may be able to get physical address of zero if not reserved by
firmware.
The dma address obtained by 'dma_alloc_coherent' is valid, since already
checking cpu va before, so do not check again.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is redundant code especially when registing new algorithms
in the future.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'CRYPTO_DH' has selected in 'Kconfig', so delete 'CONFIG_CRYPTO_DH'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/hisilicon/sec/sec_drv.c:843: warning: Function parameter or member 'queue' not described in 'sec_queue_empty'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Zaibo Xu <xuzaibo@huawei.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.delete the original complex method of obtaining the
current device and replace it with the initialized
device pointer.
2.fixes some coding style
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the log is output here, the device has not
been initialized yet.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Algorithm type is brought in to get hardware HPRE queue
to support different algorithms.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A new generation of accelerator Kunpeng930 has appeared, and the
corresponding driver needs to be updated to support some new
algorithms of Kunpeng930. To be compatible with Kunpeng920, we
add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to
identify the chip's version.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes inconsistent of printing format with argument type.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to reset hardware when Corrected Error(CE) happens.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to share IRQ among several devices,
and set 'irqflag' as 0.
Signed-off-by: Sihang Chen <chensihang1@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the size of base number is 16 bits, update the value of
'QM_SQC_VFT_BASE_MASK_V2' as 'GENMASK(15, 0)'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 'qp_stop_fail_cb' to ensure it is called as device is resetting.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add waiting logic for resetting as removing driver,
otherwise call trace will occur due to releasing resource.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable PASID by setting 'sqc' and 'cqc' pasid bits
per queue in Kunpeng 930.
For Kunpeng 920, PASID is effective for all queues once set
in SVA scenarios.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Calling 'dma_map_single' after the data is written to
ensure that the cpu cache and dma cache are consistent.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update since some special settings only for Kunpeng920.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HPRE of Kunpeng 930 is updated on cluster numbers,
so we try to update this driver to make it running
okay on Kunpeng920/Kunpeng930 chips.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uacce SysFS support more algorithms inqury such as
'ecdh/ecdsa/sm2/x25519/x448'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.One CE error is detecting timeout of generating a random number.
2.Another is detecting timeout of SVA prefetching address.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete 'HPRE_RAS_ECC1BIT_TH' register setting of hpre,
since register 'QM_RAS_CE_THRESHOLD' of qm has done this work.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register SEC device to uacce framework for user space.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register HPRE device to uacce framework for user space.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1.
'0' means ZIP is only registered to kernel crypto, and '1' means it's
registered to both kernel crypto and UACCE.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng920 SEC/HPRE/ZIP cannot support running user space SVA and kernel
Crypto at the same time. Therefore, the algorithms should not be registered
to Crypto as user space SVA is enabled.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
a set of atomic_inc_return() looks more neater
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for pseudo random number generator(PRNG)
in Crypto subsystem.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs'
set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the
thread which is sending request, the throughput will be just half.
So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work
on some different CPUS.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix aead auth setting key process error. if use soft shash function, driver
need to use digest size replace of the user input key length.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'hisi_qm_init' initializes configuration of QM.
To improve code readability, split it into two pieces.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'qm_eq_ctx_cfg' initializes configuration of EQ and AEQ,
split it into two pieces to improve code readability.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'qm_qp_ctx_cfg' initializes configuration of SQ and CQ,
split it into two pieces to improve code readability.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace 'sprintf' with 'scnprintf' to avoid overrun.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 'qm_set_sqctype' always returns 0, change it as 'void'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The returns of 'qm_get_hw_error_status' and 'qm_get_dev_err_status'
are values from the hardware registers, which should not be defined
as 'int', so update as 'u32'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some numbers are replaced by macros to avoid incomprehension.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix following warnings caused by mismatch between
function parameters and function comments.
drivers/crypto/hisilicon/sgl.c:256: warning: Excess function parameter 'hw_sgl_dma' description in 'hisi_acc_sg_buf_unmap'
drivers/crypto/hisilicon/sgl.c:256: warning: Excess function parameter 'pool' description in 'hisi_acc_sg_buf_unmap'
drivers/crypto/hisilicon/qm.c:1849: warning: Function parameter or member 'qp' not described in 'qm_drain_qp'
drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'qm' not described in 'hisi_qm_set_vft'
drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'fun_num' not described in 'hisi_qm_set_vft'
drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'base' not described in 'hisi_qm_set_vft'
drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'number' not described in 'hisi_qm_set_vft'
drivers/crypto/hisilicon/qm.c:2620: warning: Function parameter or member 'qm' not described in 'qm_clear_queues'
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'qm->curr_qm_qp_num' is not initialized, which will result in failure
to write the current_q file.
Signed-off-by: Sihang Chen <chensihang1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As before, when the ZIP device is too busy to creat a request, it will
return '-EBUSY'. But the crypto process think the '-EBUSY' means a
successful request and wait for its completion.
So replace '-EBUSY' with '-EAGAIN' to show crypto this request is failed.
Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zero length input will cause a call trace when use GZIP
decompress like this:
Unable to handle kernel paging request at virtual address
...
lr : get_gzip_head_size+0x7c/0xd0 [hisi_zip]
Judge the input length and return '-EINVAL' when input is invalid.
Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ZIP debug registers aren't cleared even if its driver is removed,
so add a clearing operation when remove driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'qm_init_qp_status' is just a help function to initiate some 'QP' status.
'QP' status should be updated separately.
This patch removes the updating flags in 'QP' status.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The parameter type of 'pci_set_drvdata' is 'struct hisi_qm',
so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm'
too.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust some coding style to make code aligned.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Fix the bug of 'mac' memory leak as allocating 'pbuf' failing.
2. Fix the bug of 'qps' leak as allocating 'qp_ctx' failing.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to pass kernel CRYPTO test, ZIP module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to pass kernel CRYPTO test, SEC module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to pass kernel CRYPTO test, HPRE module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At present, as HPRE/SEC/ZIP modules' parameter 'pf_q_num' is 1,
kernel CRYPTO test will fail on the algorithms from the modules,
since 'QP' hardware resources are not enough for CRYPTO TFM.
To fix this, the minimum value of 'pf_q_num' should be 2.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Supplement some comments.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some macros which are defined in 'zip.h' are related to the struct
'hisi_zip_sqe' and are only used in 'zip_crypto.c'. So move them from
'zip.h' to 'zip_crypto.c'.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix some code for PClint warning:
Warning - Suspicious Cast
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add print for some error branches.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Macros 'QPC_COMP', 'QPC_DECOMP' and 'HZIP_CTX_Q_NUM' are relative and
incremental. So, use an enum instead.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace 'sprintf' with 'scnprintf' to avoid overrun.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update debugfs interface parameters
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.Add prefix 'HZIP' for some macros
2.Add prefix 'hisi_zip' for some functions
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.Remove the macro 'HZIP_VF_NUM'.
2.Remove 'list' of the struct 'hisi_zip'
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.
Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.
In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call trace will appear in the Hisilicon crypto driver unbinding or
disabling SRIOV during task running with TFMs on the corresponding
function.
The log looks like this:
[ 293.908078] Call trace:
[ 293.908080] __queue_work+0x494/0x548
[ 293.908081] queue_work_on+0x84/0xd8
[ 293.908092] qm_irq+0x4c/0xd0 [hisi_qm]
[ 293.908096] __handle_irq_event_percpu+0x74/0x2a0
[ 293.908098] handle_irq_event_percpu+0x40/0x98
[ 293.908099] handle_irq_event+0x4c/0x80
[ 293.908101] handle_fasteoi_irq+0xb0/0x170
[ 293.908102] generic_handle_irq+0x3c/0x58
[ 293.908103] __handle_domain_irq+0x68/0xc0
[ 293.908104] gic_handle_irq+0xb4/0x298
[ 293.908105] el1_irq+0xcc/0x180
[ 293.908107] arch_cpu_idle+0x38/0x228
[ 293.908110] default_idle_call+0x20/0x40
[ 293.908113] do_idle+0x1cc/0x2b8
[ 293.908114] cpu_startup_entry+0x2c/0x30
[ 293.908115] rest_init+0xdc/0xe8
[ 293.908117] arch_call_rest_init+0x14/0x1c
[ 293.908117] start_kernel+0x490/0x4c4
This patch adds a waiting logic as user doing the above two operations
to avoid panic. The two operations will hold on in the driver
remove function until the tasks release all their relative TFMs.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the drivers such as HPRE/SEC/ZIP do not implement
'pci_driver.shutdow', a RAS will be triggered at OS rebooting or shutting
down as the hardware device is processing request.
The log looks like this:
NOTICE: [NimbusSecNodeType1]:[2372L]This is sec, Base = 0x141800000
NOTICE: [NimbusSecHandle]:[2319L] SecIntSt = 0x3
NOTICE: [NimbusSecHandle]:[2320L] SecQmIntStatus = 0x2
NOTICE: [PrintSecurityType]:[344L] SecurityType is RECOVERABLE!
This patch offers a new API in qm to shutdown devices, and add shutdown
callbacks in ACC driver based on this new API.
So the running devices will be stopped when the OS reboot or shutdown.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When PF FLR, the hardware will actively trigger the VF FLR. Configuration
space of VF needs to be saved and restored to ensure that it is available
after the PF FLR.
Fixes: 7ce396fa12a9("crypto: hisilicon - add FLR support")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'.
In order to keep this, explicitly pass the stop reason as an input
parameter of 'hisi_qm_stop' function.
Fixes: b67202e8ed30("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increasing depth of 'event queue' from 1024 to 2048, which equals to twice
depth of 'completion queue'. It will fix the easily happened 'event queue
overflow' as using 1024 queue depth for 'event queue'.
Fixes: 263c9959c937("crypto: hisilicon - add queue management driver...")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The queue depth is 1024, so the condition for judging the queue full
should be 1023, otherwise the hardware cannot judge whether the queue
is empty or full.
Fixes: 263c9959c937("crypto: hisilicon - add queue management driver...")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Requests will be sent continuously as resetting, which will cause 'printk'
flooding. Using 'dev_info_ratelimited' can solve this problem well.
Fixes: b67202e8ed30("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The used reference count is used for counting the number of 'sqe' which
is under processing. This reference count should be cleared as starting
'qp', otherwise the 'used' will be messy when allocating this 'qp' again.
Fixes: 5308f6600a39("crypto: hisilicon - QM memory management...")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Save the string address before pass to strsep, release it at end.
Because strsep will update the string address to point after the
token.
Fixes: c31dc9fe165d("crypto: hisilicon/qm - add DebugFS for xQC and...")
Signed-off-by: Sihang Chen <chensihang1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
for Hi1620 hardware, we should disable these hardware flr:
1. BME_FLR - bit 7,
2. PM_FLR - bit 11,
3. SRIOV_FLR - bit 12,
Or HPRE may goto D3 state, when we bind and unbind HPRE quickly,
as it does FLR triggered by BME/PM/SRIOV.
Fixes: c8b4b477079d("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If CONFIG_PCI_IOV is not enabled, we can not use "sriov_configure".
Fixes: 5ec302a364bf("crypto: hisilicon - add SRIOV support for HPRE")
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Bit 1 to bit 5 are NFE, not CE.
2. Macro 'HPRE_VF_NUM' is defined in 'qm.h', so delete it here.
3. Delete multiple blank lines.
4. Adjust format alignment.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Registers in "hpre_dfx_files" can only be cleaned to zero but
HPRE_OVERTIME_THRHLD, which can be written as any number.
Fixes: 64a6301ebee7("crypto: hisilicon/hpre - add debugfs for ...")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialize current queue number as HPRE_PF_DEF_Q_NUM, or it is zero
and we can't set its value by "current_q_write".
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify some log output interfaces and
update author information
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update debugfs interface parameters, and adjust the
processing logic inside the corresponding function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updates the initialization and reset of SEC driver's
register operation.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As before, if a SEC queue is at the 'fake busy' status,
the request with a 'fake busy' flag will be sent into hardware
and the sending function returns busy. After the request is
finished, SEC driver's call back will identify the 'fake busy' flag,
and notifies the user that hardware is not busy now by calling
user's call back function.
Now, a request sent into busy hardware will be cached in the
SEC queue's backlog, return '-EBUSY' to user.
After the request being finished, the cached requests will
be processed in the call back function. to notify the
corresponding user that SEC queue can process more requests.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC debug registers aren't cleared even if its driver is removed,
so add a clearing operation in driver removing.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If users don't specify NUMA node, the driver will use the ZIP module near
the CPU allocating acomp. Otherwise, it uses the ZIP module according to
the requirement of users.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PASID is defined as "int" although it's a 20-bit value and shouldn't be
negative int. To be consistent with PASID type in iommu, define PASID
as "u32".
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is this call chain:
sec_alg_skcipher_encrypt -> sec_alg_skcipher_crypto ->
sec_alg_alloc_and_calc_split_sizes -> kcalloc
where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP
was not specified.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.19+
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As stress-ng running SEC engine on the Ubuntu OS,
we found that SEC only supports two threads each with one TFM
based on the default module parameter 'ctx_q_num'.
If running more threads, stress-ng will fail since it cannot
get more TFMs.
In order to fix this, we adjusted the default values
of the module parameters to support more TFMs.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Originally this code rejected any read less than 256 bytes. There
is no need for this artificial limit. We should just use the normal
helper functions to read a string from the kernel.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function hisi_acc_create_sg_pool may allocate a block of
memory of size PAGE_SIZE * 2^(MAX_ORDER - 1). This value may
exceed 2^31 on ia64, which would overflow the u32.
This patch caps it at 2^31.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d8ac7b8523 ("crypto: hisilicon - fix large sgl memory...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be compatible with devices of different versions, V1 in the
accelerator driver is now isolated, and other versions are the previous
V2 processing flow.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix
is required.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon ZIP engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add debugfs to provides IO operation debug information
and add BD processing timeout count function
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon SEC engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QM driver uses debugfs to provides the current state of
the QM state machine
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM
for HPRE/ZIP/SEC drivers.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently zip sqe is stored in hisi_zip_qp_ctx, which will bring corruption
with multiple parallel users of the crypto tfm.
This patch removes the zip_sqe in hisi_zip_qp_ctx and uses a temporary sqe
instead.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By configuring the device error in firmware to report through abnormal
interruption, process all NFE errors in irq handler.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Put all the code for the memory allocation into the QM initialization
process. Before, The qp memory was allocated when the qp was created,
and released when the qp was released, It is now changed to allocate
all the qp memory once.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some initial value assignment of struct hisi_qm could put into QM.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The codes related use_dma_api is useless which should be removed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.
Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add specific states for qm and qp, every state change under critical region
to prevent from race condition. Meanwhile, qp state change will also depend
on qm state.
Due to the introduction of these states, it is necessary to pay attention
to the calls of public logic, such as concurrent scenarios resetting and
releasing queue will call hisi_qm_stop, which needs to add additional
status to distinguish and process.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
put q_num_set similar code into qm to reduce the redundancy.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Misc fixes on coding style:
1.Merge QM initialization code into a function
2.Merge QM's PF and VF initialization into a function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Misc fixes on coding style:
1.Merge pre-initialization and initialization of QM
2.Package the initialization of QM's PF and VF into a function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust the position of SMMU status check and
SEC queue initialization in SEC probe
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sec_dfx_regs is never changed and can therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
17982 7312 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o
After:
text data bss dec hex filename
18366 6928 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hzip_dfx_regs is never changed and can be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
15236 6160 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
After:
text data bss dec hex filename
15620 5776 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hpre_cluster_dfx_regs and hpre_com_dfx_regs are never changed and can
therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
16455 6288 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
After:
text data bss dec hex filename
16839 5904 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Cc: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following sparse warning:
drivers/crypto/hisilicon/qm.c:3079:5: warning: symbol 'qm_controller_reset'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
due to the selects of CRYPTO_DEV_HISI_QM which now depends on ACPI
Fixes: 6c6dd5802c ("crypto: hisilicon/qm - add controller reset...")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is not working well to determine whether the queue is empty based on
whether the used count is 0. It is more stable to get if the queue is
stopping by checking if the tail pointer of the send queue and the
completion queue are equal.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for controller reset in SEC driver.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the controller reset in HPRE driver.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the main implementation of the controller reset interface, which is
roughly divided into three parts, stop, reset, and reinitialization.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The vfs_num module parameter has been used in zip driver, this patch adds
this for HPRE and SEC driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clean the duplicate SR-IOV related codes, put all into qm.c.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
