mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-28 18:10:32 +00:00
loongarch-next
90 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Alexey Kardashevskiy
|
b4abeccb8d |
crypto: ccp - Fix locking on alloc failure handling
The __snp_alloc_firmware_pages() helper allocates pages in the firmware state (alloc + rmpupdate). In case of failed rmpupdate, it tries reclaiming pages with already changed state. This requires calling the PSP firmware and since there is sev_cmd_mutex to guard such calls, the helper takes a "locked" parameter so specify if the lock needs to be held. Most calls happen from snp_alloc_firmware_page() which executes without the lock. However commit |
||
|
Ashish Kalra
|
ab8b9fd39c |
crypto: ccp - Fix SNP panic notifier unregistration
Panic notifiers are invoked with RCU read lock held and when the
SNP panic notifier tries to unregister itself from the panic
notifier callback itself it causes a deadlock as notifier
unregistration does RCU synchronization.
Code flow for SNP panic notifier:
snp_shutdown_on_panic() ->
__sev_firmware_shutdown() ->
__sev_snp_shutdown_locked() ->
atomic_notifier_chain_unregister(.., &snp_panic_notifier)
Fix SNP panic notifier to unregister itself during SNP shutdown
only if panic is not in progress.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Ashish Kalra
|
0fa766726c |
crypto: ccp - Fix dereferencing uninitialized error pointer
Fix below smatch warnings:
drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked()
error: we previously assumed 'error' could be null
Fixes:
|
||
|
Linus Torvalds
|
785cdec46e |
Core x86 updates for v6.16:
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
|
|
||
|
Xin Li (Intel)
|
efef7f184f |
x86/msr: Add explicit includes of <asm/msr.h>
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
||
|
Ashish Kalra
|
9af6339a65 |
crypto: ccp - Fix __sev_snp_shutdown_locked
Fix smatch warning:
drivers/crypto/ccp/sev-dev.c:1755 __sev_snp_shutdown_locked()
error: uninitialized symbol 'dfflush_error'.
Fixes:
|
||
|
Ingo Molnar
|
78255eb239 |
x86/msr: Rename 'wrmsrl()' to 'wrmsrq()'
Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Xin Li <xin@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Herbert Xu
|
af7e23c616 |
crypto: ccp - Silence may-be-uninitialized warning in sev_ioctl_do_pdh_export
The recent reordering of code in sev_ioctl_do_pdh_export triggered
a false-positive may-be-uninitialized warning from gcc:
In file included from ../include/linux/sched/task.h:13,
from ../include/linux/sched/signal.h:9,
from ../include/linux/rcuwait.h:6,
from ../include/linux/percpu-rwsem.h:7,
from ../include/linux/fs.h:34,
from ../include/linux/compat.h:17,
from ../arch/x86/include/asm/ia32.h:7,
from ../arch/x86/include/asm/elf.h:10,
from ../include/linux/elf.h:6,
from ../include/linux/module.h:19,
from ../drivers/crypto/ccp/sev-dev.c:11:
In function ‘copy_to_user’,
inlined from ‘sev_ioctl_do_pdh_export’ at ../drivers/crypto/ccp/sev-dev.c:2036:7,
inlined from ‘sev_ioctl’ at ../drivers/crypto/ccp/sev-dev.c:2249:9:
../include/linux/uaccess.h:225:16: warning: ‘input_cert_chain_address’ may be used uninitialized [-Wmaybe-uninitialized]
225 | return _copy_to_user(to, from, n);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/crypto/ccp/sev-dev.c: In function ‘sev_ioctl’:
../drivers/crypto/ccp/sev-dev.c:1961:22: note: ‘input_cert_chain_address’ was declared here
1961 | void __user *input_cert_chain_address;
| ^~~~~~~~~~~~~~~~~~~~~~~~
Silence it by moving the initialisation of the variables in question
prior to the NULL check.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Ashish Kalra
|
3f8f0133a5 |
crypto: ccp - Move SEV/SNP Platform initialization to KVM
SNP initialization is forced during PSP driver probe purely because SNP can't be initialized if VMs are running. But the only in-tree user of SEV/SNP functionality is KVM, and KVM depends on PSP driver for the same. Forcing SEV/SNP initialization because a hypervisor could be running legacy non-confidential VMs make no sense. This patch removes SEV/SNP initialization from the PSP driver probe time and moves the requirement to initialize SEV/SNP functionality to KVM if it wants to use SEV/SNP. Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ashish Kalra
|
f7b86e0e75 |
crypto: ccp - Add new SEV/SNP platform shutdown API
Add new API interface to do SEV/SNP platform shutdown when KVM module is unloaded. Reviewed-by: Dionna Glaze <dionnaglaze@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ashish Kalra
|
19860c3274 |
crypto: ccp - Register SNP panic notifier only if SNP is enabled
Currently, the SNP panic notifier is registered on module initialization regardless of whether SNP is being enabled or initialized. Instead, register the SNP panic notifier only when SNP is actually initialized and unregister the notifier when SNP is shutdown. Reviewed-by: Dionna Glaze <dionnaglaze@google.com> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ashish Kalra
|
65a895a44e |
crypto: ccp - Reset TMR size at SNP Shutdown
Implicit SNP initialization as part of some SNP ioctls modify TMR size to be SNP compliant which followed by SNP shutdown will leave the TMR size modified and then subsequently cause SEV only initialization to fail, hence, reset TMR size to default at SNP Shutdown. Acked-by: Dionna Glaze <dionnaglaze@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ashish Kalra
|
ceac7fb89e |
crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls
Modify the behavior of implicit SEV initialization in some of the SEV ioctls to do both SEV initialization and shutdown and add implicit SNP initialization and shutdown to some of the SNP ioctls so that the change of SEV/SNP platform initialization not being done during PSP driver probe time does not break userspace tools such as sevtool, etc. Prior to this patch, SEV has always been initialized before these ioctls as SEV initialization is done as part of PSP module probe, but now with SEV initialization being moved to KVM module load instead of PSP driver probe, the implied SEV INIT actually makes sense and gets used and additionally to maintain SEV platform state consistency before and after the ioctl SEV shutdown needs to be done after the firmware call. It is important to do SEV Shutdown here with the SEV/SNP initialization moving to KVM, an implicit SEV INIT here as part of the SEV ioctls not followed with SEV Shutdown will cause SEV to remain in INIT state and then a future SNP INIT in KVM module load will fail. Also ensure that for these SEV ioctls both implicit SNP and SEV INIT is done followed by both SEV and SNP shutdown as RMP table must be initialized before calling SEV INIT if SNP host support is enabled. Similarly, prior to this patch, SNP has always been initialized before these ioctls as SNP initialization is done as part of PSP module probe, therefore, to keep a consistent behavior, SNP init needs to be done here implicitly as part of these ioctls followed with SNP shutdown before returning from the ioctl to maintain the consistent platform state before and after the ioctl. Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ashish Kalra
|
9770b428b1 |
crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown
Move dev_info and dev_err messages related to SEV/SNP initialization and shutdown into __sev_platform_init_locked(), __sev_snp_init_locked() and __sev_platform_shutdown_locked(), __sev_snp_shutdown_locked() so that they don't need to be issued from callers. This allows both _sev_platform_init_locked() and various SEV/SNP ioctls to call __sev_platform_init_locked(), __sev_snp_init_locked() and __sev_platform_shutdown_locked(), __sev_snp_shutdown_locked() for implicit SEV/SNP initialization and shutdown without additionally printing any errors/success messages. Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ashish Kalra
|
6131e119f5 |
crypto: ccp - Abort doing SEV INIT if SNP INIT fails
If SNP host support (SYSCFG.SNPEn) is set, then the RMP table must be initialized before calling SEV INIT. In other words, if SNP_INIT(_EX) is not issued or fails then SEV INIT will fail if SNP host support (SYSCFG.SNPEn) is enabled. Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Christian Brauner
|
25fe3d58e4
|
sev-dev: avoid pointless cred reference count bump
and fix a memory leak while at it. The new creds are created via prepare_creds() and then reverted via put_cred(revert_creds()). The additional reference count bump from override_creds() wasn't even taken into account before. Link: https://lore.kernel.org/r/20241125-work-cred-v2-8-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Christian Brauner
|
51c0bcf097
|
tree-wide: s/revert_creds_light()/revert_creds()/g
Rename all calls to revert_creds_light() back to revert_creds(). Link: https://lore.kernel.org/r/20241125-work-cred-v2-6-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Christian Brauner
|
6771e004b4
|
tree-wide: s/override_creds_light()/override_creds()/g
Rename all calls to override_creds_light() back to overrid_creds(). Link: https://lore.kernel.org/r/20241125-work-cred-v2-5-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Christian Brauner
|
f905e00904
|
tree-wide: s/revert_creds()/put_cred(revert_creds_light())/g
Convert all calls to revert_creds() over to explicitly dropping reference counts in preparation for converting revert_creds() to revert_creds_light() semantics. Link: https://lore.kernel.org/r/20241125-work-cred-v2-3-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Christian Brauner
|
0a670e151a
|
tree-wide: s/override_creds()/override_creds_light(get_new_cred())/g
Convert all callers from override_creds() to override_creds_light(get_new_cred()) in preparation of making override_creds() not take a separate reference at all. Link: https://lore.kernel.org/r/20241125-work-cred-v2-1-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Amit Shah
|
3401f63e72 |
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
While sending a command to the PSP, we always requested an interrupt
from the PSP after command completion. This worked for most cases. For
the special case of irqs being disabled -- e.g. when running within
crashdump or kexec contexts, we should not set the SEV_CMDRESP_IOC flag,
so the PSP knows to not attempt interrupt delivery.
Fixes:
|
||
|
Pavan Kumar Paluri
|
ce3d2d6b15 |
crypto: ccp - Properly unregister /dev/sev on sev PLATFORM_STATUS failure
In case of sev PLATFORM_STATUS failure, sev_get_api_version() fails
resulting in sev_data field of psp_master nulled out. This later becomes
a problem when unloading the ccp module because the device has not been
unregistered (via misc_deregister()) before clearing the sev_data field
of psp_master. As a result, on reloading the ccp module, a duplicate
device issue is encountered as can be seen from the dmesg log below.
on reloading ccp module via modprobe ccp
Call Trace:
<TASK>
dump_stack_lvl+0xd7/0xf0
dump_stack+0x10/0x20
sysfs_warn_dup+0x5c/0x70
sysfs_create_dir_ns+0xbc/0xd
kobject_add_internal+0xb1/0x2f0
kobject_add+0x7a/0xe0
? srso_alias_return_thunk+0x5/0xfbef5
? get_device_parent+0xd4/0x1e0
? __pfx_klist_children_get+0x10/0x10
device_add+0x121/0x870
? srso_alias_return_thunk+0x5/0xfbef5
device_create_groups_vargs+0xdc/0x100
device_create_with_groups+0x3f/0x60
misc_register+0x13b/0x1c0
sev_dev_init+0x1d4/0x290 [ccp]
psp_dev_init+0x136/0x300 [ccp]
sp_init+0x6f/0x80 [ccp]
sp_pci_probe+0x2a6/0x310 [ccp]
? srso_alias_return_thunk+0x5/0xfbef5
local_pci_probe+0x4b/0xb0
work_for_cpu_fn+0x1a/0x30
process_one_work+0x203/0x600
worker_thread+0x19e/0x350
? __pfx_worker_thread+0x10/0x10
kthread+0xeb/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for sev with -EEXIST, don't try to register things with the same name in the same directory.
ccp 0000:22:00.1: sev initialization failed
ccp 0000:22:00.1: psp initialization failed
ccp 0000:a2:00.1: no command queues available
ccp 0000:a2:00.1: psp enabled
Address this issue by unregistering the /dev/sev before clearing out
sev_data in case of PLATFORM_STATUS failure.
Fixes:
|
||
|
Tom Lendacky
|
142a794bcf |
crypto: ccp - Add additional information about an SEV firmware upgrade
Print additional information, in the form of the old and new versions of the SEV firmware, so that it can be seen what the base firmware was before the upgrade. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
2c9b351240 |
ARM:
* Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement * Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware * Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol * FPSIMD/SVE support for nested, including merged trap configuration and exception routing * New command-line parameter to control the WFx trap behavior under KVM * Introduce kCFI hardening in the EL2 hypervisor * Fixes + cleanups for handling presence/absence of FEAT_TCRX * Miscellaneous fixes + documentation updates LoongArch: * Add paravirt steal time support. * Add support for KVM_DIRTY_LOG_INITIALLY_SET. * Add perf kvm-stat support for loongarch. RISC-V: * Redirect AMO load/store access fault traps to guest * perf kvm stat support * Use guest files for IMSIC virtualization, when available ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA extensions is coming through the RISC-V tree. s390: * Assortment of tiny fixes which are not time critical x86: * Fixes for Xen emulation. * Add a global struct to consolidate tracking of host values, e.g. EFER * Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. * Print the name of the APICv/AVIC inhibits in the relevant tracepoint. * Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. * Drop MTRR virtualization, and instead always honor guest PAT on CPUs that support self-snoop. * Update to the newfangled Intel CPU FMS infrastructure. * Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored. * Misc cleanups x86 - MMU: * Small cleanups, renames and refactoring extracted from the upcoming Intel TDX support. * Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs. * Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting, to avoid stalling vCPUs when splitting huge pages. * Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state because the callers fully expect a valid SPTE, it's all but dangerous to let more MMU changes happen afterwards. x86 - AMD: * Make per-CPU save_area allocations NUMA-aware. * Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code. * Base support for running SEV-SNP guests. API-wise, this includes a new KVM_X86_SNP_VM type, encrypting/measure the initial image into guest memory, and finalizing it before launching it. Internally, there are some gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges. This includes basic support for attestation guest requests, enough to say that KVM supports the GHCB 2.0 specification. There is no support yet for loading into the firmware those signing keys to be used for attestation requests, and therefore no need yet for the host to provide certificate data for those keys. To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data. x86 - Intel: * Remove an unnecessary EPT TLB flush when enabling hardware. * Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1). * KVM: x86: Suppress MMIO that is triggered during task switch emulation Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation. Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed. See commit |
||
|
Michael Roth
|
332d2c1d71 |
crypto: ccp: Add the SNP_VLEK_LOAD command
When requesting an attestation report a guest is able to specify whether it wants SNP firmware to sign the report using either a Versioned Chip Endorsement Key (VCEK), which is derived from chip-unique secrets, or a Versioned Loaded Endorsement Key (VLEK) which is obtained from an AMD Key Derivation Service (KDS) and derived from seeds allocated to enrolled cloud service providers (CSPs). For VLEK keys, an SNP_VLEK_LOAD SNP firmware command is used to load them into the system after obtaining them from the KDS. Add a corresponding userspace interface so to allow the loading of VLEK keys into the system. See SEV-SNP Firmware ABI 1.54, SNP_VLEK_LOAD for more details. Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Message-ID: <20240501085210.2213060-21-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Kim Phillips
|
468e329577 |
crypto: ccp - Fix null pointer dereference in __sev_snp_shutdown_locked
Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE.
Return from __sev_snp_shutdown_locked() if the psp_device or the
sev_device structs are not initialized. Without the fix, the driver will
produce the following splat:
ccp 0000:55:00.5: enabling device (0000 -> 0002)
ccp 0000:55:00.5: sev enabled
ccp 0000:55:00.5: psp enabled
BUG: kernel NULL pointer dereference, address: 00000000000000f0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ #29
RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150
Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83
RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808
RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0
R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8
R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x6f/0xb0
? __die+0xcc/0xf0
? page_fault_oops+0x330/0x3a0
? save_trace+0x2a5/0x360
? do_user_addr_fault+0x583/0x630
? exc_page_fault+0x81/0x120
? asm_exc_page_fault+0x2b/0x30
? __sev_snp_shutdown_locked+0x2e/0x150
__sev_firmware_shutdown+0x349/0x5b0
? pm_runtime_barrier+0x66/0xe0
sev_dev_destroy+0x34/0xb0
psp_dev_destroy+0x27/0x60
sp_destroy+0x39/0x90
sp_pci_remove+0x22/0x60
pci_device_remove+0x4e/0x110
really_probe+0x271/0x4e0
__driver_probe_device+0x8f/0x160
driver_probe_device+0x24/0x120
__driver_attach+0xc7/0x280
? driver_attach+0x30/0x30
bus_for_each_dev+0x10d/0x130
driver_attach+0x22/0x30
bus_add_driver+0x171/0x2b0
? unaccepted_memory_init_kdump+0x20/0x20
driver_register+0x67/0x100
__pci_register_driver+0x83/0x90
sp_pci_init+0x22/0x30
sp_mod_init+0x13/0x30
do_one_initcall+0xb8/0x290
? sched_clock_noinstr+0xd/0x10
? local_clock_noinstr+0x3e/0x100
? stack_depot_save_flags+0x21e/0x6a0
? local_clock+0x1c/0x60
? stack_depot_save_flags+0x21e/0x6a0
? sched_clock_noinstr+0xd/0x10
? local_clock_noinstr+0x3e/0x100
? __lock_acquire+0xd90/0xe30
? sched_clock_noinstr+0xd/0x10
? local_clock_noinstr+0x3e/0x100
? __create_object+0x66/0x100
? local_clock+0x1c/0x60
? __create_object+0x66/0x100
? parameq+0x1b/0x90
? parse_one+0x6d/0x1d0
? parse_args+0xd7/0x1f0
? do_initcall_level+0x180/0x180
do_initcall_level+0xb0/0x180
do_initcalls+0x60/0xa0
? kernel_init+0x1f/0x1d0
do_basic_setup+0x41/0x50
kernel_init_freeable+0x1ac/0x230
? rest_init+0x1f0/0x1f0
kernel_init+0x1f/0x1d0
? rest_init+0x1f0/0x1f0
ret_from_fork+0x3d/0x50
? rest_init+0x1f0/0x1f0
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in:
CR2: 00000000000000f0
---[ end trace 0000000000000000 ]---
RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150
Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83
RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808
RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0
R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8
R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x1fc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes:
|
||
|
Borislav Petkov (AMD)
|
0ecaefb303 |
x86/CPU/AMD: Track SNP host status with cc_platform_*()
The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.
Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.
Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.
Move kdump_sev_callback() to its rightful place, while at it.
Fixes:
|
||
|
Linus Torvalds
|
38b334fc76 |
- Add the x86 part of the SEV-SNP host support. This will allow the
kernel to be used as a KVM hypervisor capable of running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP is the ultimate goal of the AMD confidential computing side, providing the most comprehensive confidential computing environment up to date. This is the x86 part and there is a KVM part which did not get ready in time for the merge window so latter will be forthcoming in the next cycle. - Rework the early code's position-dependent SEV variable references in order to allow building the kernel with clang and -fPIE/-fPIC and -mcmodel=kernel - The usual set of fixes, cleanups and improvements all over the place -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmXvH0wACgkQEsHwGGHe VUrzmA//VS/n6dhHRnm/nAGngr4PeegkgV1OhyKYFfiZ272rT6P9QvblQrgcY0dc Ij1DOhEKlke51pTHvMOQ33B3P4Fuc0mx3dpCLY0up5V26kzQiKCjRKEkC4U1bcw8 W4GqMejaR89bE14bYibmwpSib9T/uVsV65eM3xf1iF5UvsnoUaTziymDoy+nb43a B1pdd5vcl4mBNqXeEvt0qjg+xkMLpWUI9tJDB8mbMl/cnIFGgMZzBaY8oktHSROK QpuUnKegOgp1RXpfLbNjmZ2Q4Rkk4MNazzDzWq3EIxaRjXL3Qp507ePK7yeA2qa0 J3jCBQc9E2j7lfrIkUgNIzOWhMAXM2YH5bvH6UrIcMi1qsWJYDmkp2MF1nUedjdf Wj16/pJbeEw1aKKIywJGwsmViSQju158vY3SzXG83U/A/Iz7zZRHFmC/ALoxZptY Bi7VhfcOSpz98PE3axnG8CvvxRDWMfzBr2FY1VmQbg6VBNo1Xl1aP/IH1I8iQNKg /laBYl/qP+1286TygF1lthYROb1lfEIJprgi2xfO6jVYUqPb7/zq2sm78qZRfm7l 25PN/oHnuidfVfI/H3hzcGubjOG9Zwra8WWYBB2EEmelf21rT0OLqq+eS4T6pxFb GNVfc0AzG77UmqbrpkAMuPqL7LrGaSee4NdU3hkEdSphlx1/YTo= =c1ps -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Add the x86 part of the SEV-SNP host support. This will allow the kernel to be used as a KVM hypervisor capable of running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP is the ultimate goal of the AMD confidential computing side, providing the most comprehensive confidential computing environment up to date. This is the x86 part and there is a KVM part which did not get ready in time for the merge window so latter will be forthcoming in the next cycle. - Rework the early code's position-dependent SEV variable references in order to allow building the kernel with clang and -fPIE/-fPIC and -mcmodel=kernel - The usual set of fixes, cleanups and improvements all over the place * tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/sev: Disable KMSAN for memory encryption TUs x86/sev: Dump SEV_STATUS crypto: ccp - Have it depend on AMD_IOMMU iommu/amd: Fix failure return from snp_lookup_rmpentry() x86/sev: Fix position dependent variable references in startup code crypto: ccp: Make snp_range_list static x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT Documentation: virt: Fix up pre-formatted text block for SEV ioctls crypto: ccp: Add the SNP_SET_CONFIG command crypto: ccp: Add the SNP_COMMIT command crypto: ccp: Add the SNP_PLATFORM_STATUS command x86/cpufeatures: Enable/unmask SEV-SNP CPU feature KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown crypto: ccp: Handle legacy SEV commands when SNP is enabled crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled crypto: ccp: Handle the legacy TMR allocation when SNP is enabled x86/sev: Introduce an SNP leaked pages list crypto: ccp: Provide an API to issue SEV and SNP commands ... |
||
|
Borislav Petkov (AMD)
|
f9e6f00d93 |
crypto: ccp: Make snp_range_list static
Fix: drivers/crypto/ccp/sev-dev.c:93:28: sparse: sparse: symbol 'snp_range_list' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402031410.GTE3PJ1Y-lkp@intel.com Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/202402031410.GTE3PJ1Y-lkp@intel.com |
||
|
Kim Phillips
|
ccb88e9549 |
crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked
The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN:
[ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[ 137.162647] ccp 0000:23:00.1: no command queues available
[ 137.170598] ccp 0000:23:00.1: sev enabled
[ 137.174645] ccp 0000:23:00.1: psp enabled
[ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311
[ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[ 137.182693] Call Trace:
[ 137.182693] <TASK>
[ 137.182693] ? show_regs+0x6c/0x80
[ 137.182693] ? __die_body+0x24/0x70
[ 137.182693] ? die_addr+0x4b/0x80
[ 137.182693] ? exc_general_protection+0x126/0x230
[ 137.182693] ? asm_exc_general_protection+0x2b/0x30
[ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180
[ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80
[ 137.182693] sev_dev_destroy+0x49/0x100
[ 137.182693] psp_dev_destroy+0x47/0xb0
[ 137.182693] sp_destroy+0xbb/0x240
[ 137.182693] sp_pci_remove+0x45/0x60
[ 137.182693] pci_device_remove+0xaa/0x1d0
[ 137.182693] device_remove+0xc7/0x170
[ 137.182693] really_probe+0x374/0xbe0
[ 137.182693] ? srso_return_thunk+0x5/0x5f
[ 137.182693] __driver_probe_device+0x199/0x460
[ 137.182693] driver_probe_device+0x4e/0xd0
[ 137.182693] __driver_attach+0x191/0x3d0
[ 137.182693] ? __pfx___driver_attach+0x10/0x10
[ 137.182693] bus_for_each_dev+0x100/0x190
[ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10
[ 137.182693] ? __kasan_check_read+0x15/0x20
[ 137.182693] ? srso_return_thunk+0x5/0x5f
[ 137.182693] ? _raw_spin_unlock+0x27/0x50
[ 137.182693] driver_attach+0x41/0x60
[ 137.182693] bus_add_driver+0x2a8/0x580
[ 137.182693] driver_register+0x141/0x480
[ 137.182693] __pci_register_driver+0x1d6/0x2a0
[ 137.182693] ? srso_return_thunk+0x5/0x5f
[ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0
[ 137.182693] ? __pfx_sp_mod_init+0x10/0x10
[ 137.182693] sp_pci_init+0x22/0x30
[ 137.182693] sp_mod_init+0x14/0x30
[ 137.182693] ? __pfx_sp_mod_init+0x10/0x10
[ 137.182693] do_one_initcall+0xd1/0x470
[ 137.182693] ? __pfx_do_one_initcall+0x10/0x10
[ 137.182693] ? parameq+0x80/0xf0
[ 137.182693] ? srso_return_thunk+0x5/0x5f
[ 137.182693] ? __kmalloc+0x3b0/0x4e0
[ 137.182693] ? kernel_init_freeable+0x92d/0x1050
[ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190
[ 137.182693] ? srso_return_thunk+0x5/0x5f
[ 137.182693] kernel_init_freeable+0xa64/0x1050
[ 137.182693] ? __pfx_kernel_init+0x10/0x10
[ 137.182693] kernel_init+0x24/0x160
[ 137.182693] ? __switch_to_asm+0x3e/0x70
[ 137.182693] ret_from_fork+0x40/0x80
[ 137.182693] ? __pfx_kernel_init+0x10/0x10
[ 137.182693] ret_from_fork_asm+0x1b/0x30
[ 137.182693] </TASK>
[ 137.182693] Modules linked in:
[ 137.538483] ---[ end trace 0000000000000000 ]---
Fixes:
|
||
|
Brijesh Singh
|
cb645fe478 |
crypto: ccp: Add the SNP_SET_CONFIG command
The SEV-SNP firmware provides the SNP_CONFIG command used to set various
system-wide configuration values for SNP guests, such as the reported
TCB version used when signing guest attestation reports. Add an
interface to set this via userspace.
[ mdr: Squash in doc patch from Dionna, drop extended request/
certificate handling and simplify this to a simple wrapper around
SNP_CONFIG fw cmd. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-26-michael.roth@amd.com
|
||
|
Tom Lendacky
|
fad133c79a |
crypto: ccp: Add the SNP_COMMIT command
The SNP_COMMIT command is used to commit the currently installed version of the SEV firmware. Once committed, the firmware cannot be replaced with a previous firmware version (cannot be rolled back). This command will also update the reported TCB to match that of the currently installed firmware. [ mdr: Note the reported TCB update in the documentation/commit. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-25-michael.roth@amd.com |
||
|
Brijesh Singh
|
f5db8841eb |
crypto: ccp: Add the SNP_PLATFORM_STATUS command
This command is used to query the SNP platform status. See the SEV-SNP spec for more details. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-24-michael.roth@amd.com |
||
|
Ashish Kalra
|
8ef979584e |
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
Add a kdump safe version of sev_firmware_shutdown() and register it as a crash_kexec_post_notifier so it will be invoked during panic/crash to do SEV/SNP shutdown. This is required for transitioning all IOMMU pages to reclaim/hypervisor state, otherwise re-init of IOMMU pages during crashdump kernel boot fails and panics the crashdump kernel. This panic notifier runs in atomic context, hence it ensures not to acquire any locks/mutexes and polls for PSP command completion instead of depending on PSP command completion interrupt. [ mdr: Remove use of "we" in comments. ] Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-21-michael.roth@amd.com |
||
|
Ashish Kalra
|
f366a8dac1 |
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
Add a new IOMMU API interface amd_iommu_snp_disable() to transition IOMMU pages to Hypervisor state from Reclaim state after SNP_SHUTDOWN_EX command. Invoke this API from the CCP driver after SNP_SHUTDOWN_EX command. Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-20-michael.roth@amd.com |
||
|
Brijesh Singh
|
a867ad6b34 |
crypto: ccp: Handle legacy SEV commands when SNP is enabled
The behavior of legacy SEV commands is altered when the firmware is initialized for SNP support. In that case, all command buffer memory that may get written to by legacy SEV commands must be marked as firmware-owned in the RMP table prior to issuing the command. Additionally, when a command buffer contains a system physical address that points to additional buffers that firmware may write to, special handling is needed depending on whether: 1) the system physical address points to guest memory 2) the system physical address points to host memory To handle case #1, the pages of these buffers are changed to firmware-owned in the RMP table before issuing the command, and restored to hypervisor-owned after the command completes. For case #2, a bounce buffer is used instead of the original address. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-19-michael.roth@amd.com |
||
|
Tom Lendacky
|
7364a6fbca |
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
For SEV/SEV-ES, a buffer can be used to access non-volatile data so it can be initialized from a file specified by the init_ex_path CCP module parameter instead of relying on the SPI bus for NV storage, and afterward the buffer can be read from to sync new data back to the file. When SNP is enabled, the pages comprising this buffer need to be set to firmware-owned in the RMP table before they can be accessed by firmware for subsequent updates to the initial contents. Implement that handling here. [ bp: Carve out allocation into a helper. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-18-michael.roth@amd.com |
||
|
Brijesh Singh
|
24512afa43 |
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
The behavior and requirement for the SEV-legacy command is altered when the SNP firmware is in the INIT state. See SEV-SNP firmware ABI specification for more details. Allocate the Trusted Memory Region (TMR) as a 2MB-sized/aligned region when SNP is enabled to satisfy new requirements for SNP. Continue allocating a 1MB-sized region for !SNP configuration. [ bp: Carve out TMR allocation into a helper. ] Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-17-michael.roth@amd.com |
||
|
Brijesh Singh
|
18085ac2f2 |
crypto: ccp: Provide an API to issue SEV and SNP commands
Export sev_do_cmd() as a generic API for the hypervisor to issue commands to manage an SEV or an SNP guest. The commands for SEV and SNP are defined in the SEV and SEV-SNP firmware specifications. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240126041126.1927228-15-michael.roth@amd.com |
||
|
Brijesh Singh
|
1ca5614b84 |
crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP
Before SNP VMs can be launched, the platform must be appropriately
configured and initialized via the SNP_INIT command.
During the execution of SNP_INIT command, the firmware configures
and enables SNP security policy enforcement in many system components.
Some system components write to regions of memory reserved by early
x86 firmware (e.g. UEFI). Other system components write to regions
provided by the operation system, hypervisor, or x86 firmware.
Such system components can only write to HV-fixed pages or Default
pages. They will error when attempting to write to pages in other page
states after SNP_INIT enables their SNP enforcement.
Starting in SNP firmware v1.52, the SNP_INIT_EX command takes a list of
system physical address ranges to convert into the HV-fixed page states
during the RMP initialization. If INIT_RMP is 1, hypervisors should
provide all system physical address ranges that the hypervisor will
never assign to a guest until the next RMP re-initialization.
For instance, the memory that UEFI reserves should be included in the
range list. This allows system components that occasionally write to
memory (e.g. logging to UEFI reserved regions) to not fail due to
RMP initialization and SNP enablement.
Note that SNP_INIT(_EX) must not be executed while non-SEV guests are
executing, otherwise it is possible that the system could reset or hang.
The psp_init_on_probe module parameter was added for SEV/SEV-ES support
and the init_ex_path module parameter to allow for time for the
necessary file system to be mounted/available.
SNP_INIT(_EX) does not use the file associated with init_ex_path. So, to
avoid running into issues where SNP_INIT(_EX) is called while there are
other running guests, issue it during module probe regardless of the
psp_init_on_probe setting, but maintain the previous deferrable handling
for SEV/SEV-ES initialization.
[ mdr: Squash in psp_init_on_probe changes from Tom, reduce
proliferation of 'probe' function parameter where possible.
bp: Fix 32-bit allmodconfig build. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-14-michael.roth@amd.com
|
||
|
Brijesh Singh
|
3a45dc2b41 |
crypto: ccp: Define the SEV-SNP commands
AMD introduced the next generation of SEV called SEV-SNP (Secure Nested
Paging). SEV-SNP builds upon existing SEV and SEV-ES functionality while
adding new hardware security protection.
Define the commands and structures used to communicate with the AMD-SP
when creating and managing the SEV-SNP guests. The SEV-SNP firmware spec
is available at developer.amd.com/sev.
[ mdr: update SNP command list and SNP status struct based on current
spec, use C99 flexible arrays, fix kernel-doc issues. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-13-michael.roth@amd.com
|
||
|
Kirill A. Shutemov
|
5e0a760b44 |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
commit
|
||
|
John Allen
|
c35b581e51 |
crypto: ccp - Dump SEV command buffer registers on SEV command error
PSP firmware may report additional error information in the SEV command buffer registers in situations where an error occurs as the result of an SEV command. In this case, check if the command buffer registers have been modified and if so, dump the contents. Signed-off-by: John Allen <john.allen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
733f7e9c18 |
This update includes the following changes:
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
|
||
|
Kirill A. Shutemov
|
23baf831a3 |
mm, treewide: redefine MAX_ORDER sanely
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Borislav Petkov (AMD)
|
dbf07b544c |
crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer
Add a wrapper instead. No functional changes. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230307192449.24732-9-bp@alien8.de |
||
|
Peter Gonda
|
efb339a833 |
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
The PSP can return a "firmware error" code of -1 in circumstances where the PSP has not actually been called. To make this protocol unambiguous, name the value SEV_RET_NO_FW_CALL. [ bp: Massage a bit. ] Signed-off-by: Peter Gonda <pgonda@google.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com |
||
|
Mario Limonciello
|
1c5c1daf04 |
crypto: ccp - Move some PSP mailbox bit definitions into common header
Some of the bits and fields used for mailboxes communicating with the PSP are common across all mailbox implementations (SEV, TEE, etc). Move these bits into the common `linux/psp.h` so they don't need to be re-defined for each implementation. Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Mario Limonciello
|
ae7d45fb7c |
crypto: ccp - Add a header for multiple drivers to use __psp_pa
The TEE subdriver for CCP, the amdtee driver and the i2c-designware-amdpsp drivers all include `psp-sev.h` even though they don't use SEV functionality. Move the definition of `__psp_pa` into a common header to be included by all of these drivers. Reviewed-by: Jan Dabros <jsd@semihalf.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> # For the drivers/i2c/busses/i2c-designware-amdpsp.c Acked-by: Sumit Garg <sumit.garg@linaro.org> # For TEE subsystem bits Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Sean Christopherson <seanjc@google.com> # KVM Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |