RZ/T2H has 2 register blocks at different addresses.
The clock tree has configurable dividers and mux selectors.
Add these new clock types, new register layout type, and
registration code for mux and div in registration callback.
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250515141828.43444-6-thierry.bultel.yh@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In a subsequent patch, the registration callback will need more parameters
from cpg_mssr_priv (like another base address with clock controllers
with double register block, and also, notifiers and rmw_lock).
Instead of adding more parameters, move the needed parameters to a public
sub-struct.
Instead moving clks to this structure, which would have implied to add
an allocation (and cleanup) for it, keep the way the allocation is done
and just have a copy of the pointer in the public structure.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Link: https://lore.kernel.org/20250515141828.43444-5-thierry.bultel.yh@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reorder the pointer members in struct mstp_clock so they appear immediately
after the hw member. This helps avoid potential padding and eliminates the
need for any calculations in the to_mod_clock() macro. As struct clk_hw
currently contains only pointers, placing it first also avoids padding.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20250514090415.4098534-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since the sibling data is filled after the priv->clks[] array entry is
populated, the first clock that is probed and has a sibling will
temporarily behave as its own sibling until its actual sibling is
populated. To avoid any issues, postpone updating priv->clks[] until after
the sibling is populated.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250514090415.4098534-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset support for the Mali-G31 GPU on the Renesas RZ/V2N
(R9A09G056) SoC. This includes adding clock sources required for the
module clocks.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250513154635.273664-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add module clock and reset definitions for WDT0-3, which are available
on the RZ/V2N (R9A09G056) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250513154635.273664-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add module clock and reset definitions for RIIC controllers 0-8, which
are available on the RZ/V2N (R9A09G056) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250513154635.273664-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce a new fixed divider .pllcln_div16 which is sourced from PLLCLN
and add PCLK module clocks gtm_0_pclk through gtm_7_pclk for OSTM0-7.
Add corresponding reset lines GTM_0_PRESETZ through GTM_7_PRESETZ to
control the OSTM instances.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250513154635.273664-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for GBETH instances. Include core clocks for
PTP, sourced from PLLETH, and add PLLs, dividers, and static mux clocks
used as clock sources for the GBETH IP.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250513154635.273664-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for GBETH instances. Include core clocks for
PTP, sourced from PLLETH, and add PLLs, dividers, and static mux clocks
used as clock sources for the GBETH IP.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250509160121.331073-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
For module clocks whose parent mux may select an external source, bypass
the normal monitor (CLK_MON) register check when the external clock is
active. Introduce a new `ext_clk_mux_index` in `struct rzv2h_mod_clk` and
`struct mod_clock`, and detect the current mux index in
`rzv2h_mod_clock_is_enabled()` to disable monitoring if it matches the
external source index.
Provide the `DEF_MOD_MUX_EXTERNAL()` macro for declaring external-source
module clocks, and populate the `ext_clk_mux_index` field in
`rzv2h_cpg_register_mod_clk()`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250509160121.331073-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
new machine. The migration process took longer than expected and disrupted my
workflow, but I think I'm ready to go and things should speed up from here.
Luckily, this has been a semi-quiet cycle. The core framework remains unchanged
this time around. In terms of shiny new code though, we have support for the
SpacemiT K1 SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the
usual silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is likely
because they put one SoC support inside a driver for a different SoC that is
very similar. Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along with some
Kconfig changes to make compile testing simpler and even more DT binding
conversions to boot. The exciting part is still the new SoC support like
SpacemiT and Sophgo support though, which really dominate the diffstat because
they introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to YAML
-----BEGIN PGP SIGNATURE-----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=bEFK
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
Only two changes:
- Fix the order of arguments in clk macro for
SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT that was recently introduced in
v6.15-rc1
- Add missing post-divider for D1 MMC clocks to correct halved
performance
-----BEGIN PGP SIGNATURE-----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=1K0B
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull Allwinner clk driver fixes from Chen-Yu Tsai:
Only two changes:
- Fix the order of arguments in clk macro for
SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT that was recently introduced in
v6.15-rc1
- Add missing post-divider for D1 MMC clocks to correct halved
performance
* tag 'sunxi-clk-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: sunxi-ng: fix order of arguments in clock macro
Update the force mem core bit for UFS ICE clock and UFS PHY AXI clock to
force the core on signal to remain active during halt state of the clk.
If force mem core bit of the clock is not set, the memories of the
subsystem will not retain the logic across power states. This is
required for the MCQ feature of UFS.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250414-gcc_ufs_mem_core-v1-2-67b5529b9b5d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update the force mem core bit for UFS AXI clock to force the core on
signal to remain active during halt state of the clk. If force mem
core bit of the clock is not set, the memories of the subsystem will
not retain the logic across power states. This is required for the MCQ
feature of the UFS driver.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250414-gcc_ufs_mem_core-v1-1-67b5529b9b5d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8650, clkaN are missing in cmd-db for some specific devices. This
caused a boot failure. Printing log during initramfs phase, I found
[ 0.053281] clk-rpmh 17a00000.rsc:clock-controller: missing RPMh resource address for clka1
Adding the optional property to avoid probing failure which causes
countless deferred probe. In the downstream tree,similar workarounds
are introduced for SM7635, SM8550, SM8635, SM8650, SM8750.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250413172205.175789-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 Camera clock controller is a derivative of SA8775P, but has
few additional clocks and offset differences. Hence, add support for
QCS8300 Camera clock controller by extending the SA8775P CamCC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250327-qcs8300-mm-patches-v6-1-b3fbde2820a6@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The newly added GRF types introduced kzalloc usage into the rk3528.
At least for the similar rk3576 driver, the kernel-test-robot reported the
missing prototype, which warranted adding a slab.h include.
While it did not complain about the rk3528, so the header might be included
"accidentially" right now, add a real include to make sure we keep it
included in the future.
Fixes: 306d2f5dda ("clk: rockchip: rk3528: Add SD/SDIO tuning clocks in GRF region")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250515082652.2503063-2-heiko@sntech.de
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250404-kconfig-defaults-clk-v1-1-4d2df5603332@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
SPICC is missing fclk_div2, which means fclk_div5 and fclk_div7 indexes
are wrong on this clock. This causes the spicc module to output sclk at
2.5x the expected rate when clock index 3 is picked.
Adding the missing fclk_div2 resolves this.
[jbrunet: amended commit description]
Fixes: a18c8e0b76 ("clk: meson: g12a: add support for the SPICC SCLK Source clocks")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Da Xue <da@libre.computer>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250512142617.2175291-1-da@libre.computer
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Fix mclk0 & mclk1 parent map to use correct GPLL6 configuration and
freq_tbl to use GPLL6 instead of GPLL0 so that they tick at 24 MHz.
Fixes: 1664014e46 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20250414-gcc-msm8939-fixes-mclk-v2-resend2-v2-1-5ddcf572a6de@mailoo.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We now have a number of new branch-types coming from the "General Register
Files" (gates and mmc phase clocks). Their naming as branch_grf_foo is
way nicer, so rename the old branch_muxgrf to a similar scheme.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250508182752.1925313-2-heiko@sntech.de
The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.
Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.
This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The DE33 is a newer version of the Allwinner Display Engine IP block,
found in the H616, H618, H700 and T507 SoCs. DE2 and DE3 are already
supported by the mainline driver.
The DE33 in the H616 has mixer0 and writeback units. The clocks
and resets required are identical to the H3 and H5 respectively, so use
those existing structs for the H616 description.
There are two additional 32-bit registers (at offsets 0x24 and 0x28)
which require clearing and setting respectively to bring up the
hardware. The function of these registers is currently unknown, and the
values are taken from the out-of-tree driver.
Add the required clock description struct and compatible string to the
DE2 driver.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250511104042.24249-9-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the required LVDS reset for the LCD TCON. Note that while this
reset is exposed for the T507, H616, and H700 only the H700 has
an LCD controller.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250507201943.330111-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
With UBSAN enabled, we're getting the following trace:
UBSAN: array-index-out-of-bounds in .../drivers/clk/clk-s2mps11.c:186:3
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
This is because commit f316cdff8d ("clk: Annotate struct
clk_hw_onecell_data with __counted_by") annotated the hws member of
that struct with __counted_by, which informs the bounds sanitizer about
the number of elements in hws, so that it can warn when hws is accessed
out of bounds.
As noted in that change, the __counted_by member must be initialised
with the number of elements before the first array access happens,
otherwise there will be a warning from each access prior to the
initialisation because the number of elements is zero. This occurs in
s2mps11_clk_probe() due to ::num being assigned after ::hws access.
Move the assignment to satisfy the requirement of assign-before-access.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250326-s2mps11-ubsan-v1-1-fcc6fce5c8a9@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ddrphy is supplied by the dpll, but due to the limited number of PLLs
on the rk3036, the dpll also is used for other periperhals, like the GPU.
So it happened, when the Lima driver turned off the gpu clock, this in
turn also disabled the dpll and thus the ram.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-4-heiko@sntech.de
Contrary to how it is implemented right now, this mux is controllable via
a bit in CRU_MUSC_CON (same bit as on rk3128 even) and allows switching
between xin24m and the 480m output of the usb2phy.
So drop the hard-coded fixed-factor clock and implement the correct mux
instead.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-3-heiko@sntech.de
The mux smux2_xspi_clk{0,1} used for selecting spi and spix2 clocks and
pllcm33_xspi divider to select different clock rates. Add support for
both.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
These clocks locate in VO and VPU GRF, serving for SD/SDIO controller
tuning purpose. Add their definitions and register them in driver if
corresponding GRF is available.
GRFs are looked up by compatible to simplify devicetree binding.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250506092206.46143-4-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Registers of MMC drive/sample clocks in Rockchip RV1106 and RK3528
locate in GRF regions. Adjust MMC clock code to support register
operations through regmap.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250506092206.46143-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The T-Head TH1520 SoC integrates a variety of clocks for its subsystems,
including the Application Processor (AP) and the Video Output (VO) [1].
Up until now, the T-Head clock driver only supported AP clocks.
Extend the driver to provide clock functionality for the VO subsystem.
At this stage, the focus is on implementing the VO clock gates, as these
are currently the most relevant and required components for enabling and
disabling the VO subsystem functionality. Future enhancements may
introduce additional VO-related clocks as necessary.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf [1]
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Add of device id definition for newly added precise compatible.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250504104553.1447819-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Simplify of_davinci_pll_init() by using of_get_available_child_by_name().
While at it, move of_node_put(child) inside the if block to avoid
additional check if of_child is NULL.
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250410062040.6346-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 93d2725aff ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250402020513.42628-1-bsdhenrymartin@gmail.com
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since commit fbac2e7787 ("clk: bcm: rpi: Allow the driver to
be probed by DT") the module alias isn't necessary anymore. So
we can drop it.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250415185614.16292-1-wahrenst@gmx.net
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
scaled_div_build() was added in 2014 by
commit 1f27f15258 ("clk: bcm281xx: add initial clock framework support")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250505013545.359745-1-linux@treblig.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).
Fixes: 013804a727 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-3-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-2-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-1-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Rockchip RK3576 gates the SAI MCLKOUT clocks behind some IOC GRF
writes.
Add these clock branches, and add the IOC GRF to the auxiliary GRF
hashtable.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-4-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Some rockchip SoCs, namely the RK3576, have bits in a General Register
File (GRF) that act just like clock gates. The downstream vendor kernel
simply maps over the already mapped GRF range with a generic clock gate
driver. This solution isn't suitable for upstream, as a memory range
will be in use by multiple drivers at the same time, and it leaks
implementation details into the device tree.
Instead, implement this with a new clock branch type in the Rockchip
clock driver: GRF gates. Somewhat akin to MUXGRF, this clock branch
depends on the type of GRF, but functions like a gate instead.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-3-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MUXGRF clock branch type depends on having access to some sort of
GRF as a regmap to be registered. So far, we could easily get away with
only ever having one GRF stowed away in the context.
However, newer Rockchip SoCs, such as the RK3576, have several GRFs
which are relevant for clock purposes. It already depends on the pmu0
GRF for MUXGRF reasons, but could get away with not refactoring this
because it didn't need the sysgrf at all, so could overwrite the pointer
in the clock provider to the pmu0 grf regmap handle.
In preparation for needing to finally access more than one GRF per SoC,
let's untangle this. Introduce an auxiliary GRF hashmap, and a GRF type
enum. The hashmap is keyed by the enum, and clock branches now have a
struct member to store the value of that enum, which defaults to the
system GRF.
The SoC-specific _clk_init function can then insert pointers to GRF
regmaps into the hashmap based on the grf type.
During clock branch registration, we then pick the right GRF for each
branch from the hashmap if something other than the sys GRF is
requested.
The reason for doing it with this grf type indirection in the clock
branches is so that we don't need to define the MUXGRF branches in a
separate step, just to have a direct pointer to a regmap available
already.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-2-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When introducing the SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro, the order
of the last two arguments was different between the users and the
definition: features became flags and flags became features.
This just didn't end up in a disaster yet because most users ended up
passing 0 for both arguments, and other clocks (for the new A523 SoC) are
not yet used.
Swap the order of the arguments in the definition, so that users stay
untouched.
Fixes: cdbb9d0d09 ("clk: sunxi-ng: mp: provide wrappers for setting feature flags")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250430095325.477311-1-andre.przywara@arm.com
[wens@csie.org: fix typo in commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The CLKS_NR_CPUCL0 macro was incorrectly defined based on a wrong clock ID.
It mistakenly referenced CLK_DOUT_CLUSTER0_PERIPHCLK, which corresponds to
a cluster peripheral clock, not the last clock ID for CPUCL0 as intended.
This patch corrects the definition to use CLK_DOUT_CPUCL0_NOCP + 1,
properly matching the last clock ID for CPUCL0 as intended.
This error was due to confusion with the hardware diagram, and this patch
ensures that the number of clocks for CPUCL0 is correctly defined.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-4-shin.son@samsung.com
Fixes: 59636ec89c ("clk: samsung: exynosautov920: add cpucl0 clock support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Register compatible and cmu_info data to support clock CPUCL1/2
(CPU Cluster 1 and CPU Cluster 2),
these provide clock for CPUCL1/2_SWTICH/CLUSTER.
These clocks are required early during boot for the CPUs,
so they are declared using CLK_OF_DECLARE instead of being registered
through a platform driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Register compatible and cmu_info data to support clock CPUCL0(CPU
Cluster 0), this provides clock for CPUCL0_SWTICH/DBG/CLUSTER. These
clocks are required early during boot for the CPUs, so they are declared
using CLK_OF_DECLARE instead of being registered through a platform
driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250423044153.1288077-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enabling the compile test should not cause automatic enabling of all
drivers. Restrict the default to ARCH also for individual drivers, even
though their choice is not visible without selecting parent Kconfig
symbol, because otherwise selecting parent would select the child during
compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250404-kconfig-defaults-clk-v1-5-4d2df5603332@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Enabling the compile test should not cause automatic enabling of all
drivers. Restrict the default to ARCH also for individual drivers, even
though their choice is not visible without selecting parent Kconfig
symbol, because otherwise selecting parent would select the child during
compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250404-kconfig-defaults-clk-v1-4-4d2df5603332@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The phy clock of the OTP block is also present, but was not defined
so far. Though its clk-id already existed, so just define its location.
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210224510.1194963-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since readl() returns a u32, the local variable reg can also have the
data type u32. Furthermore, mdiv and refdiv are derived from reg and can
also be a u32.
Since do_div() casts the divisor to u32 anyway, changing the data type
of refdiv to u32 removes the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Compile-tested only.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Since readl() returns a u32, the local variables reg and bypass can also
have the data type u32. Furthermore, divf and divq are derived from reg
and can also be a u32.
Since do_div() casts the divisor to u32 anyway, changing the data type
of divq to u32 removes the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Compile-tested only.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Update the clock enable/disable logic to follow the latest hardware
manual's guidelines, ensuring that both CLK_ON and CLK_MON bits are used
to confirm the clock state.
According to the manual, enabling a clock requires setting the
CPG_CLK_ON bit and verifying the clock has started using the CPG_CLK_MON
bit. Similarly, disabling a clock requires clearing the CPG_CLK_ON bit
and confirming the clock has stopped via the CPG_CLK_MON bit.
Modify `rzv2h_mod_clock_is_enabled()` to check CLK_MON first and then
validate CLK_ON for a more accurate clock status evaluation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for static dividers that do not require read-modify-write
(RMW) operations. This enables the use of the generic clk_divider_ops
instead of the custom RMW-based implementation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Unlike dynamic dividers, static dividers do not have a monitor bit.
Introduce the `DEF_CSDIV()` macro for defining static dividers, ensuring
consistency with existing dynamic divider macros.
Additionally, introduce the `CSDIV_NO_MON` macro to indicate the absence
of a monitor bit, allowing the monitoring step to be skipped when `mon`
is set to `CSDIV_NO_MON`.
Note, `rzv2h_cpg_ddiv_clk_register()` will be re-used instead of generic
`clk_hw_register_divider_table()` for registering satic dividers as some
of the static dividers require RMW operations.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for `CLK_TYPE_SMUX` to register static muxed clocks on the
Renesas RZ/V2H(P) SoC. Extend `cpg_core_clk` to include parent names,
mux flags, and a new `smuxed` struct. Update clock registration to
handle static mux clocks.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The control register for TWSI8 clocks, APBC_TWSI8_CLK_RST, contains mux
selection bits, reset assertion bit and enable bits for function and bus
clocks. It has a quirk that reading always results in zero.
As a workaround, let's hardcode the mux value as zero to select
pll1_d78_31p5 as parent and treat twsi8_clk as a gate, whose enable mask
is combined from the real bus and function clocks to avoid the
write-only register being shared between two clk_hws, in which case
updates of one clk_hw zero the other's bits.
With a 1:1 factor serving as placeholder for the bus clock, the I2C-8
controller could be brought up, which is essential for boards attaching
power-management chips to it.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-5-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The clock tree of K1 SoC contains three main types of clock hardware
(PLL/DDN/MIX) and has control registers split into several multifunction
devices: APBS (PLLs), MPMU, APBC and APMU.
All register operations are done through regmap to ensure atomicity
between concurrent operations of clock driver and reset,
power-domain driver that will be introduced in the future.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-4-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Use samsung CCF function which registers multiple clock providers using
single function call samsung_cmu_register_clocks().
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250307092403.19742-1-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In the current implementation, the return value of dev_pm_domain_attach()
is not checked. This can lead to silent failures if the function fails,
as the code would continue execution and return 0, ignoring the error.
This patch adds a check for the return value of dev_pm_domain_attach().
If the function fails, an error message is logged using dev_err_probe(),
and the error is propagated to the existing error handling path `err`,
which ensures proper cleanup by calling clk_notifier_unregister().
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250211092017.562-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock structure for RZ/V2N is almost identical to RZ/V2H(P) SoC
with less IP blocks compared to RZ/V2H(P). For eg: CRU2/3 are present
only on the RZ/V2H(P) SoC.
Add minimal clock and reset entries required to boot the Renesas
RZ/V2N EVK and binds it with the RZ/V2H CPG family driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reorder the compatible entries in `rzv2h_cpg_match[]` to follow a
numerical sequence based on the SoC part numbers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Unlike PLLs in previous geneation of SoCs, PLLs in RK3588 type don't
require any platform-specific initialization. Drop callback
rockchip_rk3588_pll_init() that does nothing in fact to clean the
driver up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250326113556.21039-1-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rename PLL field extraction macros to include the associated register name
(`CPG_PLL_CLK1` or `CPG_PLL_CLK2`) to maintain consistency with other PLL
register macros. Update all corresponding macro references accordingly.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some RZ/V2H(P) SoC variants do not have a GPU, resulting in PLLGPU being
disabled by default in TF-A. Add support for enabling PLL clocks in the
RZ/V2H(P) CPG driver to manage this.
Introduce `is_enabled` and `enable` callbacks to handle PLL state
transitions. With the `enable` callback, PLLGPU will be turned ON only
when the GPU node is enabled; otherwise, it will remain off. Define new
macros for PLL standby and monitor registers to facilitate this process.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Remove the redundant `type` field from `struct pll_clk`, as it is not used
in the PLL clock handling logic.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor PLL handling by introducing a `struct pll` to encapsulate PLL
configuration parameters, ensuring consistency with the existing dynamic
divider structure.
Introduce the `PLL_PACK()` macro to simplify PLL structure initialization
and update the `DEF_PLL()` macro to use the new `pll` structure. Modify
relevant clock register functions to utilize the structured PLL data
instead of raw configuration values.
This refactoring improves code readability, maintainability, and
alignment with the existing clock configuration approach.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
-----BEGIN PGP SIGNATURE-----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=XL1+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've been
baking in linux-next for weeks so I'm hoping we don't have to revert
them. The disable OF node patch is probably the scariest one although it
seems unlikely that a system would be relying on a driver _not_ probing
because the clk never appeared, but you never know. Nothing looks out of
the ordinary on the driver side but that's because it's mostly a bunch
of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive, MIF,
DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures
-----BEGIN PGP SIGNATURE-----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=RRKz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 PRCM CCU
clk: sunxi-ng: a523: add reset lines
clk: sunxi-ng: a523: add bus clock gates
clk: sunxi-ng: a523: remaining mod clocks
clk: sunxi-ng: a523: add USB mod clocks
clk: sunxi-ng: a523: add interface mod clocks
clk: sunxi-ng: a523: add system mod clocks
clk: sunxi-ng: a523: add video mod clocks
clk: sunxi-ng: a523: Add support for bus clocks
clk: sunxi-ng: Add support for the A523/T527 CCU PLLs
dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs
clk: sunxi-ng: Add support for update bit
clk: sunxi-ng: mp: provide wrappers for setting feature flags
clk: sunxi-ng: mp: introduce dual-divider clock
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
clk: sunxi-ng: h616: Add clock/reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LCD TCON clk and reset
* clk-amlogic:
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
* clk-qcom: (41 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable()
clk: qcom: videocc: Constify 'struct qcom_cc_desc'
clk: qcom: gpucc: Constify 'struct qcom_cc_desc'
clk: qcom: dispcc: Constify 'struct qcom_cc_desc'
clk: qcom: camcc: Constify 'struct qcom_cc_desc'
dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover
clk: qcom: Add support for Video Clock Controller on QCS8300
clk: qcom: Add support for GPU Clock Controller on QCS8300
...
Some of the functions are using printf() type of format, and
compiler is not happy about them as is:
clkdev.c:185:17: error: function ‘vclkdev_alloc’ might be a candidate for gnu_printf’ format attribute [-Werror=suggest-attribute=format]
clkdev.c:224:9: error: function ‘vclkdev_create’ might be a candidate for gnu_printf’ format attribute [-Werror=suggest-attribute=format]
clkdev.c:314:9: error: function ‘__clk_register_clkdev’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attributes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add support for gpll0_out_aux clock which acts as the parent for
certain networking subsystem (nss) clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313110359.242491-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 9bb6cfc3c7 ("clk: qcom: Add Global Clock Controller driver for MSM8953")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-2-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 5db3ae8b33 ("clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-1-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix a typo in MODULE_DESCRIPTION for a1 PLL driver, S4 should be A1.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241231062552.2982266-1-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
gxbb_32k_clk_div sets CLK_DIVIDER_ROUND_CLOSEST in the init_data flag which
is incorrect. This is field is not where the divider flags belong.
Thankfully, CLK_DIVIDER_ROUND_CLOSEST maps to bit 4 which is an unused
clock flag, so there is no unintended consequence to this error.
Effectively, the clock has been used without CLK_DIVIDER_ROUND_CLOSEST
so far, so just drop it.
Fixes: 14c735c8e3 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-1-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The divider values in the sdcc1_apps frequency table were incorrectly
updated, assuming the frequency of gpll2_out_main to be 1152MHz.
However, the frequency of the gpll2_out_main clock is actually 576MHz
(gpll2/2).
Due to these incorrect divider values, the sdcc1_apps clock is running
at half of the expected frequency.
Fixing the frequency table of sdcc1_apps allows the sdcc1_apps clock to
run according to the frequency plan.
Fixes: 21b5d5a4a3 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250306112900.3319330-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add support for the resets in the clock driver to enable the Audio SW
driver to assert/deassert the audio resets as needed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-2-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
During the GDSC FSM state, the GDSC hardware waits for an ACK from the
respective subsystem core. In some scenarios, this ACK can be delayed.
To handle such delays, increase the GDSC status poll timeout from 1500us
to 2000us as per the design recommendation.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-2-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@vger.kernel.org
Fixes: 173722995c ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This SoC has some leftover code all over the kernel but no boards are
supported anymore. Remove support for da830 from the davinci clock
driver. With it: remove the ifdefs around the data structures as the
da850 remains the only davinci SoC supported and the only user of this
driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250304133423.100884-1-brgl@bgdev.pl
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The A523/T527 SoCs have clock/reset controls in the PRCM part, like many
previous SoCs. For a change, the whole PRCM is documented in the A523
manual, including the system bus tree, so we can describe all those
clocks correctly based on that. There layout seems to be derived from
the H6 and H616 PRCM CCUs, though there are more clocks, and many clocks
have subtly changed.
Describe all the mod and gate clocks, including the three bus clocks
(R_AHB, R_APB0, and R_APB1).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-15-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner SoCs do not contain a separate reset controller, instead the
reset lines for the various devices are integrated into the "BGR" (Bus
Gate / Reset) registers, for each device group: one for all UARTs, one
for all SPI interfaces, and so on.
The Allwinner CCU driver also doubles as a reset provider, and since the
reset lines are indeed just single bits in those BGR register, we can
represent them easily in an array of structs, just containing the
register offset and the bit number.
Add the location of the reset bits for all devices in the A523/T527
SoCs, using the existing sunxi CCU infrastructure.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-14-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the various bus clock gates that control access to the devices'
register interface.
These clocks are each just one bit, typically the lower bits in some "BGR"
(Bus Gate / Reset) registers, for each device group: one for all UARTs,
one for all SPI interfaces, and so on.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-13-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the remaining mod clocks, driving various parts of the SoC: the "LEDC"
LED controller, the "CSI" camera interface, the "ISP" image processor,
the DSP clock, and the "fanout" clocks, which allow to put clock signals
on external pins.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-12-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving the USB subsystem: this just covers the two
clocks creating the 12 MHz rate for the OHCI (USB 1.x) device. The rest
of the USB clocks are either gate clocks (added later) or created
internal to the USB IP.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-11-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving what the user manual summarises under "interface"
devices: raw NAND flash, MMC, SPI, EMAC, "IR" infrared, and the "GPADC"
general purpose analogue/digital converter.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-10-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving some core system related subsystems of the SoC:
the "CE" crypto engine, the high speed timers, the DRAM and the associated
MBUS clock, and the PCIe clock.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-9-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving the various video subsystems of the SoC: the "DE"
display engine, the "DI" deinterlacer, the "G2D" 2D graphics system, the
Mali "GPU", the "VE" video engine, its associated IOMMU, as well as the
clocks for the various video output drivers (HDMI, DP, LCDs).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-8-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the basic bus clocks for the Allwinner A523 and T527 SoCs.
This covers the AHB, APB0 and APB1 clocks. Linux is not supposed to
change those clocks, but they are needed as parents for many other mod
clocks.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-7-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the PLL clocks of the main CCU of the Allwinner A523 and T527 SoCs.
The clocks were modelled after the A523 and T527 manual, and double
checked by writing all 1's into the respective register, to spot all
implemented bits.
The PLL and mod clocks for the two CPU clusters and the DSU are part of
a separate CCU, also most audio clocks are collected in a DSP CCU, so
both of these clock groups are missing from this driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-6-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Some clocks in the Allwinner A523 SoC contain an "update bit" (bit 27),
which must be set to apply any register changes, namely the mux
selector, the divider and the gate bit.
Add a new CCU feature bit to mark those clocks, and set bit 27 whenever
we are applying any changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-4-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
So far our sunxi clock instantiation macros set the required clock
features depending on the clock type, but the new "dual divider MP
clock" requires us to pass that piece of information in by the user.
Add new wrapper macros that allow to specify a "features" field, to
allow marking those dual-divider clocks accordingly. Also add two
convenience macros that deal with the most common cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-3-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A523 SoC introduces some new MP-style mod clock, where the
second "P" divider is an actual numerical divider value, and not the
numbers of bits to shift (1..32 instead of 1,2,4,8).
The rest of the clock is the same as the existing MP clock, so enhance the
existing code to accommodate for this.
Introduce the new CCU feature bit CCU_FEATURE_DUAL_DIV to mark an MP
clock as having two dividers, and change the dividing and encoding code
to differentiate the two cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250307002628.10684-2-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
1. Google GS101: Fix synchronous external abort during system suspend.
The driver access registers not available for OS, although issue
would not be visible in earlier kernels due to missing suspend
support.
2. Tesla FSD: Correct PLL142XX lock time.
-----BEGIN PGP SIGNATURE-----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=m4uR
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull Samsung clk driver fixes from Krzysztof Kozlowski:
- Google GS101: Fix synchronous external abort during system suspend.
The driver access registers not available for OS, although issue
would not be visible in earlier kernels due to missing suspend
support.
- Tesla FSD: Correct PLL142XX lock time
* tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
The devm_kzalloc() function returns NULL on error, not error pointers.
Fix the check.
Fixes: 03437e857b ("clk: mmp: Add Marvell PXA1908 APMU driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250307064708.209511-1-hanchunchao@inspur.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
<clk.h> header is for clock consumers, so drop its include from the
Samsung clock controller drivers which do not use the consumer API
(there are few which do, so leave it there).
Drop including of <of.h> and <of_address.h> headers for all drivers
which do not use anything from generic OF API or of_iomap().
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250305-clk-samsung-headers-cleanup-v2-2-ea1ae8e9e2bf@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add an include for <mod_devicetable.h> in the drivers which use
of_device_id table to bring its declaration directly, not through some
other headers.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250305-clk-samsung-headers-cleanup-v2-1-ea1ae8e9e2bf@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add required clocks and resets signals for the TSU IP available on the
Renesas RZ/G3E SoC
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250227122453.30480-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Fixes: c58225b7e3 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250305-topic-sm8650-upstream-fix-usb-suspend-v1-1-649036ab0557@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence
update PLL142XX controller locktime to 150.
Cc: stable@vger.kernel.org
Fixes: 4f346005aa ("clk: samsung: fsd: Add initial clock support")
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250225131918.50925-3-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
EARLY_WAKEUP_SW_TRIG_*_SET and EARLY_WAKEUP_SW_TRIG_*_CLEAR
registers are only writeable. Attempting to read these registers
during samsung_clk_save() causes a synchronous external abort.
Remove these 8 registers from cmu_top_clk_regs[] array so that
system suspend gets further.
Note: the code path can be exercised using the following command:
echo mem > /sys/power/state
Fixes: 2c597bb7d6 ("clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250303-clk-suspend-fix-v1-1-c2edaf66260f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
We have a lot of driver code that prints an error message when
registering a clk fails. Do that in the core function instead to
consolidate code. This also helps drivers avoid the anti-pattern of
accessing the struct clk_hw::init pointer after registration.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250226235408.1339266-1-sboyd@kernel.org
In clk_calc_new_rates, the "ret" is only used to store the return value
of clk_core_determine_round_nolock, and the data type of the return
value of clk_core_determine_round_nolock is int.
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250207-correct_data_types-v1-1-f22bc7ea220d@amlogic.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
instead of printing errros as a number(%ld), it's better to print in string
format for better readability of logs.
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Link: https://lore.kernel.org/r/20240412090749.15392-1-onkarnath.1@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181913.597304-1-afd@ti.com
Tested-by: Nishanth Menon <nm@ti.com>
[sboyd@kernel.org: Drop dev_err_probe() because the mapping function
already does it]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-4-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-3-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-2-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250228-clk-qcom-const-v1-1-611ab80d45e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The DSP and OCRAM_A modules from AUDIOMIX are clocked by
AUDIO_AXI_CLK_ROOT, not AUDIO_AHB_CLK_ROOT. Update the clock data
accordingly.
Fixes: 6cd95f7b15 ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250226164513.33822-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add the clock tree definition for the new RK3562 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250227105916.2340856-3-kever.yang@rock-chips.com
[dropped non-working module code, cleaned up init a bit to address
build failure reported from kernel test robot
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503021302.FjsycBI2-lkp@intel.com/ ]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is a basic implementation of the clock driver required by
Samsung's Exynos7870 SoC. It implements CMU_MIF, CMU_DISPAUD, CMU_FSYS,
CMU_G3D, CMU_ISP, CMU_MFCMSCL, and CMU_PERI. all other CMUs depend on
CMU_MIF.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmu-clocks-v5-2-715b646d5206@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_TOP is the top level clock management unit which contains PLLs,
muxes, dividers and gates that feed the other clock management units.
CMU_ALIVE provides clocks for SPMI, the new MCT and other clock
management units
CMU_CMGP provides clocks for USI blocks
CMU_HSI0 provides clocks for USB
CMU_PERIC0 provides clocks for USI4 and I3C blocks
CMU_PERIC1 provides clocks for USI blocks
CMU_PERIC2 provides clocks for USI and I3C blocks
CMU_PERIS provides clocks for GIC and the legacy MCT
CMU_UFS provides clocks for UFS
CMU_VTS provides clocks for other clock management units
like CMU_AUD, which will be added in the future.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pll4311 (also known in the vendor kernel as frd_4311_rpll) is a PLL used
in the Exynos2200 SoC. It's an integer/fractional PLL with mid frequency
FVCO (650 to 3500Mhz).
The PLL is functionally similar enough to pll531x, so the same code can
handle both.
Locktime for pll4311 is 500 - the same as the pll531x lock factor. MDIV,
PDIV, SDIV and FDIV masks and bit shifts are also the same as pll531x.
When defining a PLL, the "con" parameter should be set to CON3
register, like this:
PLL(pll_4311, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, NULL),
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SMI LARBs require reset functions when MTCMOS powers on or off.
Add reset platform data for SMI LARBs in the image, camera and IPE
subsystems.
Signed-off-by: Friday Yang <friday.yang@mediatek.com>
Link: https://lore.kernel.org/r/20250221075058.14180-3-friday.yang@mediatek.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the commit 5d0eb375e6 ("clk: rockchip: Add clock controller driver
for RK3528 SoC") only the dt-binding header was added for the reset
controller for the RK3528 SoC.
Add a reset lookup table generated from the SRST symbols used by vendor
linux-6.1-stan-rkr5 kernel to complete support for the reset controller.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250227175302.2950788-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The parent of disp_cc_mdss_byte0_intf_clk clock should not propagate up
the rates, because this messes up entire clock hierarchy when setting
clock rates in MSM DSI driver.
The dsi_link_clk_set_rate_6g() first sets entire clock hierarchy rates
via dev_pm_opp_set_rate() on byte clock and then sets individual clock
rates, like pixel and byte_intf clocks, to proper frequencies. Having
CLK_SET_RATE_PARENT caused that entire tree was re-calced and the byte
clock received halved frequency. Drop CLK_SET_RATE_PARENT to fix this
and align with SM8550 and SM8650.
Fixes: f1080d8dab ("clk: qcom: dispcc-sm8750: Add SM8750 Display clock controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250129154519.209791-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
of_clk_get_hw_from_clkspec() checks all available clock-providers by
comparing their of nodes to the one from the clkspec. If no matching
clock provider is found, the function returns -EPROBE_DEFER to cause a
re-check at a later date. If a matching clock provider is found, an
authoritative answer can be retrieved from it whether the clock exists
or not.
This does not take into account that the clock-provider may never
appear, because it's node is disabled. This can happen when a clock is
optional, provided by a separate block which never gets enabled.
One example of this happening is the rk3588's VOP, which has optional
additional display clocks coming from PLLs inside the hdmiphy blocks.
These can be used for better rates, but the system will also work
without them.
The problem around that is described in the followups to[1]. As we
already know the of node of the presumed clock provider, add a check via
of_device_is_available() whether this is a "valid" device node. This
prevents eternal defer loops.
Link: https://lore.kernel.org/dri-devel/20250215-vop2-hdmi1-disp-modes-v1-3-81962a7151d6@collabora.com/ [1]
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250222223733.2990179-1-heiko@sntech.de
[sboyd@kernel.org: Reword commit text a bit]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock tree definition for RK3528. Similar to previous Rockchip
SoCs, clock controller of RK3528 is combined with the reset controller.
We omit the reset part for now since it's hard to test it without
support for other basic peripherals.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250217061142.38480-8-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3528 comes with a new PLL variant: its "PPLL", which mainly generates
clocks for the PCIe controller, operates in normal mode only. Let's
describe it with flag ROCKCHIP_PLL_FIXED_MODE and handle it in code.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250217061142.38480-7-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Correct the clk_ref_usb3otg parent to fix clock control for the usb3
controller on rk3328. Verified against the rk3328 trm, the rk3228h trm,
and the rk3328 usb3 phy clock map.
Fixes: fe3511ad8a ("clk: rockchip: add clock controller for rk3328")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250115012628.1035928-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The clock 'pclk_vi_niu' has a dependency on 'hclk_vi_niu' according
to the Technical Reference Manual section '2.8.6 NIU Clock gating
reliance'. However, this kind of dependency cannot be addressed
properly at the moment (until the support for linked clocks is
implemented for the RK3568).
As an intermediate solution, mark the hclk_vi as critical on the
Rockchip RK3568.
Suggested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20250210-rk3568-hclk-vi-v1-1-9ade2626f638@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3066 has two "CIF" video capture interface blocks, reference the
newly added IDs for their PCLK clocks.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20241205182954.5346-2-val@packett.cool
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The H616 manual does not state that the GPU PLL supports
dynamic frequency configuration, so we must take extra care when changing
the frequency. Currently any attempt to do device DVFS on the GPU lead
to panfrost various ooops, and GPU hangs.
The manual describes the algorithm for changing the PLL
frequency, which the CPU PLL notifier code already support, so we reuse
that to reparent the GPU clock to GPU1 clock during frequency
changes.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250220113808.1122414-2-simons.philippe@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the required clock and reset which is used for the LCD TCON. Please
note that these clocks are exposed on the T507, H616, and H700; however
the H616 does not expose an LCD controller for which these clocks are
needed.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250213172248.158447-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add support for CRU0 clocks and resets along with the corresponding
divider.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250210114540.524790-2-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update the error message in `rzv2h_mod_clock_endisable()` to provide
clearer debugging information. Instead of printing only the register
address, include both the `GET_CLK_ON_OFFSET(reg)` offset and the
corresponding `clk` name (`%pC`). This enhances readability and aids
in debugging clock enable failures.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250211105603.195905-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update the error message in `rzg2l_mod_clock_endisable()` to provide
clearer debugging information. Instead of printing only the register
address, include both the `CLK_ON_R(reg)` offset and the corresponding
`clk` name (`%pC`). This enhances readability and aids in debugging
clock enable failures.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250211105603.195905-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The QCS8300 Video clock controller is a derivative of SA8775P, but has a
minor difference. Hence add support for QCS8300 Video clock controller by
extending the SA8775P VideoCC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-6-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS8300 GPU clock controller is a derivative of SA8775P, but has few
additional clocks and minor differences. Hence, add support for QCS8300
GPU clock controller, by extending the SA8775P GPUCC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-2-63e8ac268b02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are some ipq5018 based device's firmware only can able to boot
arm32 but the clock driver dont allow it to be compiled on arm32.
Therefore allow GCC for IPQ5018 to be selected when building ARM32
kernel
Signed-off-by: Karl Chan <exxxxkc@getgoogleoff.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007163414.32458-4-exxxxkc@getgoogleoff.me
[bjorn: Updated commit message, per Dmitry's suggestion]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The UART’s software and hardware flow control are currently not
functioning correctly.
For software flow control, the following error is encountered:
qcom_geni_serial 1a80000.serial: Couldn't find suitable
clock rate for 56000000, 3500000, 2500000, 1152000, 921600, 19200
During hardware flow control testing, a “Retry 0: Got ZCAN error” is
observed.
To address these issues, update the UART frequency table to include all
supported frequencies according to the frequency plan.
Fixes: 21b5d5a4a3 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250124060914.1564681-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
BRANCH_HALT_ENABLE and BRANCH_HALT_ENABLE_VOTED flags are used to check
halt status of branch clocks, which have an inverted logic for the halt
bit in CBCR register. However, the current logic in the _check_halt()
method only compares the BRANCH_HALT_ENABLE flags, ignoring the votable
branch clocks.
Update the logic to correctly handle the invert logic for votable clocks
using the BRANCH_HALT_ENABLE_VOTED flags.
Fixes: 9092d1083a ("clk: qcom: branch: Extend the invert logic for branch2 clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250128-push_fix-v1-1-fafec6747881@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This will allow linux to properly reset eMMC/SD blocks.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203063427.358327-3-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SDM429 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3 and
IPA_CLK and additionally has the BB_CLK3.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250212-sdm429-rpm-v1-2-0a24ac19a478@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reading few registers at the end of the block (e.g. 0x10000, 0x10004)
results in synchronous external abort, so limit the regmap to the last
readable register which allows dumping the regs for debugging.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212163243.237658-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Include mod_devicetable.h for the 'struct of_device_id' and
clk-provider.h for the 'struct clk_hw'.
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-3-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drivers should include only headers they use so drop:
1. of.h and of_address.h: When no OF call is used (of_device_id is
coming from mod_devicetable.h).
2. clk.h, property.h and reset-controller.h: No calls to clock consumer
or reset framework, no fwnode/property calls.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-2-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If regmap_read() fails, random stack value was used in calculating new
frequency in recalc_rate() callbacks. Such failure is really not
expected as these are all MMIO reads, however code should be here
correct and bail out. This also avoids possible warning on
uninitialized value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-1-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a clock-controller lists multiple power-domains we need make each GDSC a
subdomain of each of the clock-controller's listed power-domains.
GDSCs without an explicitly defined parent should be a subdomain of each of
the clock-controller's listed power-domains.
GDSCs with an explicitly defined parent should attach only to the parent
GDSC and not the listed power-domains. Any votes will trickle through the
hierarchy up to the external power-domains.
========================================
:: arch/arm64/boot/dts/example.dtsi ::
========================================
clockcc: clock-controller@0 {
compat ="qcom,example-clockcc";
power-domains = <&pd_a, &pd_b>;
}
========================================
:: drivers/clk/qcom/example-clockcc.c ::
========================================
static struct gdsc parent_gdsc = {
.pd = {
.name = "parent_gdsc",
},
};
static struct gdsc child0_gdsc = {
.pd = {
.name = "child0_gdsc",
},
.parent = &parent_gdsc.pd,
};
static struct gdsc child1_gdsc = {
.pd = {
.name = "child1_gdsc",
},
.parent = &parent_gdsc.pd,
};
========================================
:: power-subdomains ::
========================================
pm-domain::pd_a
└── pm-subdomain::clockcc::parent_gdsc
├── pm-subdomain::clockcc::child0_gdsc
└── pm-subdomain::clockcc::child1_gdsc
pm-domain::pd_b
└── pm-subdomain::clockcc::parent_gdsc
├── pm-subdomain::clockcc::child1_gdsc
└── pm-subdomain::clockcc::child2_gdsc
The performance states will percolate through the pm-domain hierarchy to
the domains that handle the relevant states.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-4-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Right now we support one power-domain per clock controller.
These single power-domains are switched on by the driver platform logic.
However when we have multiple power-domains attached to a clock-controller
that list of power-domains must be handled outside of driver platform
logic.
Use devm_pm_domain_attach_list() to automatically hook the list of given
power-domains in the dtsi for the clock-controller driver.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-3-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Adding a new clause to this if/else I noticed the existing usage of
pm_genpd_add_subdomain() wasn't capturing and returning the result code.
pm_genpd_add_subdomain() returns an int and can fail. Capture that result
code and throw it up the call stack if something goes wrong.
Fixes: 1b771839de ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-2-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update some RCGs on the sm8250 camera clock controller to use
clk_rcg2_shared_ops. The shared_ops ensure the RCGs get parked
to the XO during clock disable to prevent the clocks from locking up
when the GDSC is enabled. These mirror similar fixes for other controllers
such as commit e5c359f70e ("clk: qcom: camcc: Update the clock ops for
the SC7180").
Signed-off-by: Jordan Crouse <jorcrous@amazon.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250122222612.32351-1-jorcrous@amazon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GPU clock is required for CPU access to GPUSS registers. It was
previously decided (on this and many more platforms) that the added
overhead/hassle introduced by keeping track of it would not bring much
measurable improvement in the power department.
The display clock is basically the same story over again.
Now, we're past that discussion and this commit is not trying to change
that. Instead, the clocks are both force-enabled in .probe *and*
registered with the common clock framework, resulting in them being
toggled off after ignore_unused.
Unregister said clocks to fix breakage when clk_ignore_unused is absent
(as it should be).
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-1-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CMU_PERIS block is used for clocking the MCT, and has one dependency
clock from CMU_TOP. As the MCT is initialized early, this CMU is also
registered early.
While at it, make the parent clock list comment spaced out correctly,
and add it to the HSI0 block.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20250104-exynos990-cmu-v1-2-9f54d69286d6@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock
source for HP is derived from PLL6 divided by 2. Correct the
implementation by configuring HP as a fixed clock source instead of a
MUX.
The `CPG_PL6_ETH_SSEL' register, which is available on the RZ/G2UL SoC,
is not present on the RZ/Five SoC, necessitating this change.
Fixes: 95d48d2703 ("clk: renesas: r9a07g043: Add support for RZ/Five SoC")
Cc: stable@vger.kernel.org
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250127173159.34572-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G3S SoC, the CPU PLL settings can be set and retrieved through
the CPG_PLL1_CLK1 and CPG_PLL1_CLK2 registers. However, these settings
are applied only when CPG_PLL1_SETTING.SEL_PLL1 is set to 0.
Otherwise, the CPU PLL operates at the default frequency of 1.1 GHz.
Hence add support to the PLL driver for returning the 1.1 GHz frequency
when the CPU PLL is configured with the default frequency.
Fixes: 01eabef547 ("clk: renesas: rzg2l: Add support for RZ/G3S PLL")
Fixes: de60a3ebe4 ("clk: renesas: Add minimal boot support for RZ/G3S SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250115142059.1833063-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for the DRP-AI block, which is available only
on the Renesas RZ/V2L SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250106202853.262787-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
