Resolve conflicts with i.MX95 changes 88768d6f8c ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a44 ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.
* clk-fixes:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
clk: sunxi-ng: a523: Mark MBUS clock as critical
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
I manually fixed up one minor formatting issue that occurred after
applying the semantic patch:
req->rate = ccu_nm_find_best(&nm->common, req->best_parent_rate,
req->rate,
&_nm);
I manually changed it to:
req->rate = ccu_nm_find_best(&nm->common, req->best_parent_rate,
req->rate, &_nm);
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-10-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-9-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-8-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-7-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
It appears (based on experimentation) that both the de and tcon clocks
need to have the same parent for the two units to work together.
Assign them both to the video pll by manually clearing the parent
selection bits (effectively setting index 0) and marking the clocks
with the CLK_SET_RATE_NO_REPARENT flag, which ensures that they will
never use a different parent.
The video pll is also a possible parent for the camera subsystem,
but it can use the dedicated isp pll if needed so there should be
no negative side-effect due to this change.
Note that ccu_mux_helper_set_parent cannot be used at this stage as
it requires the clock driver to be initialized and this configuration
is best done before the clock driver is available to consumers.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250704154008.3463257-2-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The TCON clock can be parented to both the video PLL and the periph0 PLL.
Add the latter, which was missing from the list.
Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250701201124.812882-5-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The CSI1 MCLK clock is reported as "csi-mclk" while it is specific to
CSI1 as the name of the definition indicates. Fix it in the driver.
Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-4-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The CSI SCLK clock is incorrectly called CSI1 SCLK while it is used for
both the CSI0 and CSI1 interfaces and is called CSI SCLK all around the
documentation.
Fix the name in the driver, header and device-tree.
Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
There is a PPU0 reset control bit in the same register as the PPU1
reset control. This missing reset control is for the PCK-600 unit
in the SoC. Manual tests show that the reset control indeed exists,
and if not configured, the system will hang when the PCK-600 registers
are accessed.
Add a reset entry for it at the end of the existing ones.
Fixes: 8cea339cfb ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20250619171025.3359384-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The MBUS serves as the main data bus for various DMA masters in the
system. If its clock is not enabled, the DMA operations will stall,
leading to the peripherals stalling or timing out. This has been
observed as USB or MMC hosts timing out waiting for transactions
when the clock is automatically disabled by the CCF due to it not
being used.
Mark the clock as critical so that it never gets disabled.
Fixes: 74b0443a0d ("clk: sunxi-ng: a523: add system mod clocks")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250607135029.2085140-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
new machine. The migration process took longer than expected and disrupted my
workflow, but I think I'm ready to go and things should speed up from here.
Luckily, this has been a semi-quiet cycle. The core framework remains unchanged
this time around. In terms of shiny new code though, we have support for the
SpacemiT K1 SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the
usual silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is likely
because they put one SoC support inside a driver for a different SoC that is
very similar. Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along with some
Kconfig changes to make compile testing simpler and even more DT binding
conversions to boot. The exciting part is still the new SoC support like
SpacemiT and Sophgo support though, which really dominate the diffstat because
they introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to YAML
-----BEGIN PGP SIGNATURE-----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=bEFK
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.
Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.
This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The DE33 is a newer version of the Allwinner Display Engine IP block,
found in the H616, H618, H700 and T507 SoCs. DE2 and DE3 are already
supported by the mainline driver.
The DE33 in the H616 has mixer0 and writeback units. The clocks
and resets required are identical to the H3 and H5 respectively, so use
those existing structs for the H616 description.
There are two additional 32-bit registers (at offsets 0x24 and 0x28)
which require clearing and setting respectively to bring up the
hardware. The function of these registers is currently unknown, and the
values are taken from the out-of-tree driver.
Add the required clock description struct and compatible string to the
DE2 driver.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250511104042.24249-9-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the required LVDS reset for the LCD TCON. Note that while this
reset is exposed for the T507, H616, and H700 only the H700 has
an LCD controller.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250507201943.330111-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When introducing the SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro, the order
of the last two arguments was different between the users and the
definition: features became flags and flags became features.
This just didn't end up in a disaster yet because most users ended up
passing 0 for both arguments, and other clocks (for the new A523 SoC) are
not yet used.
Swap the order of the arguments in the definition, so that users stay
untouched.
Fixes: cdbb9d0d09 ("clk: sunxi-ng: mp: provide wrappers for setting feature flags")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250430095325.477311-1-andre.przywara@arm.com
[wens@csie.org: fix typo in commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Enabling the compile test should not cause automatic enabling of all
drivers. Restrict the default to ARCH also for individual drivers, even
though their choice is not visible without selecting parent Kconfig
symbol, because otherwise selecting parent would select the child during
compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250404-kconfig-defaults-clk-v1-4-4d2df5603332@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A523/T527 SoCs have clock/reset controls in the PRCM part, like many
previous SoCs. For a change, the whole PRCM is documented in the A523
manual, including the system bus tree, so we can describe all those
clocks correctly based on that. There layout seems to be derived from
the H6 and H616 PRCM CCUs, though there are more clocks, and many clocks
have subtly changed.
Describe all the mod and gate clocks, including the three bus clocks
(R_AHB, R_APB0, and R_APB1).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-15-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner SoCs do not contain a separate reset controller, instead the
reset lines for the various devices are integrated into the "BGR" (Bus
Gate / Reset) registers, for each device group: one for all UARTs, one
for all SPI interfaces, and so on.
The Allwinner CCU driver also doubles as a reset provider, and since the
reset lines are indeed just single bits in those BGR register, we can
represent them easily in an array of structs, just containing the
register offset and the bit number.
Add the location of the reset bits for all devices in the A523/T527
SoCs, using the existing sunxi CCU infrastructure.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-14-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the various bus clock gates that control access to the devices'
register interface.
These clocks are each just one bit, typically the lower bits in some "BGR"
(Bus Gate / Reset) registers, for each device group: one for all UARTs,
one for all SPI interfaces, and so on.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-13-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the remaining mod clocks, driving various parts of the SoC: the "LEDC"
LED controller, the "CSI" camera interface, the "ISP" image processor,
the DSP clock, and the "fanout" clocks, which allow to put clock signals
on external pins.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-12-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving the USB subsystem: this just covers the two
clocks creating the 12 MHz rate for the OHCI (USB 1.x) device. The rest
of the USB clocks are either gate clocks (added later) or created
internal to the USB IP.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-11-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving what the user manual summarises under "interface"
devices: raw NAND flash, MMC, SPI, EMAC, "IR" infrared, and the "GPADC"
general purpose analogue/digital converter.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-10-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving some core system related subsystems of the SoC:
the "CE" crypto engine, the high speed timers, the DRAM and the associated
MBUS clock, and the PCIe clock.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-9-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving the various video subsystems of the SoC: the "DE"
display engine, the "DI" deinterlacer, the "G2D" 2D graphics system, the
Mali "GPU", the "VE" video engine, its associated IOMMU, as well as the
clocks for the various video output drivers (HDMI, DP, LCDs).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-8-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the basic bus clocks for the Allwinner A523 and T527 SoCs.
This covers the AHB, APB0 and APB1 clocks. Linux is not supposed to
change those clocks, but they are needed as parents for many other mod
clocks.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-7-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the PLL clocks of the main CCU of the Allwinner A523 and T527 SoCs.
The clocks were modelled after the A523 and T527 manual, and double
checked by writing all 1's into the respective register, to spot all
implemented bits.
The PLL and mod clocks for the two CPU clusters and the DSU are part of
a separate CCU, also most audio clocks are collected in a DSP CCU, so
both of these clock groups are missing from this driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-6-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Some clocks in the Allwinner A523 SoC contain an "update bit" (bit 27),
which must be set to apply any register changes, namely the mux
selector, the divider and the gate bit.
Add a new CCU feature bit to mark those clocks, and set bit 27 whenever
we are applying any changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-4-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
So far our sunxi clock instantiation macros set the required clock
features depending on the clock type, but the new "dual divider MP
clock" requires us to pass that piece of information in by the user.
Add new wrapper macros that allow to specify a "features" field, to
allow marking those dual-divider clocks accordingly. Also add two
convenience macros that deal with the most common cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-3-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A523 SoC introduces some new MP-style mod clock, where the
second "P" divider is an actual numerical divider value, and not the
numbers of bits to shift (1..32 instead of 1,2,4,8).
The rest of the clock is the same as the existing MP clock, so enhance the
existing code to accommodate for this.
Introduce the new CCU feature bit CCU_FEATURE_DUAL_DIV to mark an MP
clock as having two dividers, and change the dividing and encoding code
to differentiate the two cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250307002628.10684-2-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The H616 manual does not state that the GPU PLL supports
dynamic frequency configuration, so we must take extra care when changing
the frequency. Currently any attempt to do device DVFS on the GPU lead
to panfrost various ooops, and GPU hangs.
The manual describes the algorithm for changing the PLL
frequency, which the CPU PLL notifier code already support, so we reuse
that to reparent the GPU clock to GPU1 clock during frequency
changes.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250220113808.1122414-2-simons.philippe@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the required clock and reset which is used for the LCD TCON. Please
note that these clocks are exposed on the T507, H616, and H700; however
the H616 does not expose an LCD controller for which these clocks are
needed.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250213172248.158447-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
drivers, per usual, and then a handful of drivers for other SoCs. Then the
usual pile of cleanups is fairly small data fixes or converting DT bindings to
YAML so they can be validated. No changes to the core framework besides an OF
node refcount bump that never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750 global,
tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh and MSM8937 and
MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver
-----BEGIN PGP SIGNATURE-----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=wK9g
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
* clk-fixes:
clk: clk-loongson2: Fix the number count of clk provider
clk: mmp2: call pm_genpd_init() only after genpd.name is set
clk: sunxi-ng: a100: enable MMC clock reparenting
clk: clk-imx8mp-audiomix: fix function signature
clk: thead: Fix TH1520 emmc and shdci clock rate
The H616 user manual recommends to re-parent the CPU clock during
frequency changes of the PLL, and recommends PLL_PERI0(1X), which runs
at 600 MHz. Also it asks to disable and then re-enable the PLL lock bit,
after the factor changes have been applied.
Add clock notifiers for the PLL and the CPU mux clock, using the existing
notifier callbacks, and tell them to use mux 4 (the PLL_PERI0(1X) source),
and bit 29 (the LOCK_ENABLE) bit. The existing code already follows the
correct algorithms.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20241025105620.1891596-1-andre.przywara@arm.com
Tested-by: Evgeny Boger <boger@wirenboard.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video
output on Pinebook that uses RGB to eDP bridge.
Partially revert commit ca1170b699 ("clk: sunxi-ng: a64: force
select PLL_MIPI in TCON0 mux"), while still leaving
CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to
be reparented.
The issue is that apparently different TCON0 outputs require a different
clock, or the mux might be selecting the output type.
I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X
to the same clock rate and flipped the switch with devmem. Experiment
clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent,
the video output stops working.
Therefore, TCON0 clock parent corresponding to the output type must be
assigned in the device tree.
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Drop redundant CLK_PLL_VIDEO0_2X and CLK_PLL.MIPI. These are now
defined in dt-bindings/clock/sun50i-a64-ccu.h
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on pinephone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-3-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
While testing the MMC nodes proposed in [1], it was noted that mmc0/1
would fail to initialize, with "mmc: fatal err update clk timeout" in
the kernel logs. A closer look at the clock definitions showed that the MMC
MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for
adding this flag in the first place, and its original purpose is unknown,
but it doesn't seem to make sense and results in severe limitations to MMC
speeds. Thus, remove this flag from the 3 MMC MPs.
[1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest
Fixes: fb038ce4db ("clk: sunxi-ng: add support for the Allwinner A100 CCU")
Cc: stable@vger.kernel.org
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241109003739.3440904-1-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241104190455.272527-1-robh@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
To work around a limitation in our clock modelling, we try to force two
bits in the AUDIO0 PLL to 0, in the CCU probe routine.
However the ~ operator only applies to the first expression, and does
not cover the second bit, so we end up clearing only bit 1.
Group the bit-ORing with parentheses, to make it both clearer to read
and actually correct.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241001105016.1068558-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
'struct ccu_reset_map' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
1533 2224 0 3757 ead drivers/clk/sunxi-ng/ccu-sun20i-d1-r.o
After:
=====
text data bss dec hex filename
1597 2160 0 3757 ead drivers/clk/sunxi-ng/ccu-sun20i-d1-r.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/44745f27034fa670605cd16966a39b7fe88fe5a6.1726863905.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner has previously released a H616 audio driver which also
provides sigma-delta modulation for the audio PLL clocks. This approach
is used in other Allwinner SoCs, including the H3 and A64.
The manual-provided clock values are:
PLL_AUDIO(hs) = 24 MHz*N/M1
PLL_AUDIO(4X) = 24 MHz*N/M0/M1/P
PLL_AUDIO(2X) = 24 MHz*N/M0/M1/P/2
PLL_AUDIO(1X) = 24 MHz*N/M0/M1/P/4
A fixed post-divider of 2 is used to account for a M0 divider of
2, which cannot be modelled by the existing macros and ccu_nm struct.
Add SDM to the H616 clock control unit driver.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-2-ryan@testtoast.com
[wens@csie.org: Fixed whitespace errors]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
clk driver support. We have the usual Qualcomm clk drivers, along with
clk drivers for the Sophgo and T-Head vendors, all to support some new
SoCs.
Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.
I really wanted to land a bunch of KUnit clk code that I've been working
on whenever I get some free time but it turned into a pumpkin at the
last minute so I dropped those patches. I'll let it soak in linux-next
after the merge window closes. I have a suspicion that we're going to
need to totally rework the clk framework to fix structural issues like
locking, clk rate setting, and runtime PM usage. Having a bunch of unit
tests for that will help make sure that all keeps working.
Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO emulation
New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers
Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on Qualcomm
X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match
HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as .of_match_table,
because the driver is instantiated as MFD cell, not as standalone platform
driver. Populated .of_match_table confused people few times to convert the
code to device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops the
system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M
-----BEGIN PGP SIGNATURE-----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=jEjn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This a large collection of clk driver updates and a handful of new SoC
clk driver support.
We have the usual Qualcomm clk drivers, along with clk drivers for the
Sophgo and T-Head vendors, all to support some new SoCs.
Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.
Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO
emulation
New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers
Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on
Qualcomm X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to
match HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as
.of_match_table, because the driver is instantiated as MFD cell,
not as standalone platform driver. Populated .of_match_table
confused people few times to convert the code to
device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops
the system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and
avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
clk: sunxi-ng r40: Constify struct regmap_config
clk: en7523: fix rate divider for slic and spi clocks
clk: lpc32xx: Constify struct regmap_config
clk: xilinx: Constify struct regmap_config
clk: en7523: Remove PCIe reset open drain configuration for EN7581
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
clk: en7523: Add reset-controller support for EN7581 SoC
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
dt-bindings: clock: sprd,sc9860-clk: convert to YAML
dt-bindings: clock: qoriq-clock: convert to yaml format
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
...
`sun8i_r40_ccu_regmap_config` is not modified and can be declared as
const to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240703-clk-const-regmap-v1-9-7d15a0671d6f@gmail.com
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the GPADC required clock and reset which is used for the onboard
GPADC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240605172049.231108-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
